Merge branch 'Development' into cleanup_ultralcd

Latest upstream changes
This commit is contained in:
Scott Lahteine 2015-02-21 18:04:08 -08:00
commit c7a97e18b7
9 changed files with 48 additions and 219 deletions

View File

@ -51,11 +51,10 @@
#define BOARD_WITBOX 41 // bq WITBOX #define BOARD_WITBOX 41 // bq WITBOX
#define BOARD_HEPHESTOS 42 // bq Prusa i3 Hephestos #define BOARD_HEPHESTOS 42 // bq Prusa i3 Hephestos
#define BOARD_BAM_DICE 401 // 2PrintBeta BAM&DICE with STK drivers #define BOARD_BAM_DICE 401 // 2PrintBeta BAM&DICE with STK drivers
#define BOARD_BAM_DICE_DUE 402 // 2PrintBeta BAM&DICE Due with STK drivers and Arduino Mega #define BOARD_BAM_DICE_DUE 402 // 2PrintBeta BAM&DICE Due with STK drivers
#define BOARD_99 99 // This is in pins.h but...? #define BOARD_99 99 // This is in pins.h but...?
#define MB(board) (MOTHERBOARD==BOARD_##board) #define MB(board) (MOTHERBOARD==BOARD_##board)
#define IS_RAMPS (MB(RAMPS_OLD) || MB(RAMPS_13_EFB) || MB(RAMPS_13_EEB) || MB(RAMPS_13_EFF) || MB(RAMPS_13_EEF) || MB(BAM_DICE) )
#endif //__BOARDS_H #endif //__BOARDS_H

View File

@ -36,7 +36,7 @@
#include "pins_SETHI.h" #include "pins_SETHI.h"
#elif MB(RAMPS_OLD) #elif MB(RAMPS_OLD)
#include "pins_RAMPS_OLD.h" #include "pins_RAMPS_OLD.h"
#elif IS_RAMPS #elif MB(RAMPS_13_EFB) || MB(RAMPS_13_EEB) || MB(RAMPS_13_EFF) || MB(RAMPS_13_EEF)
#include "pins_RAMPS_13.h" #include "pins_RAMPS_13.h"
#elif MB(DUEMILANOVE_328P) #elif MB(DUEMILANOVE_328P)
#include "pins_DUEMILANOVE_328P.h" #include "pins_DUEMILANOVE_328P.h"
@ -110,6 +110,8 @@
#include "pins_WITBOX.h" #include "pins_WITBOX.h"
#elif MB(HEPHESTOS) #elif MB(HEPHESTOS)
#include "pins_HEPHESTOS.h" #include "pins_HEPHESTOS.h"
#elif MB(BAM_DICE)
#include "pins_RAMPS_13.h"
#elif MB(BAM_DICE_DUE) #elif MB(BAM_DICE_DUE)
#include "pins_BAM_DICE_DUE.h" #include "pins_BAM_DICE_DUE.h"
#elif MB(99) #elif MB(99)

View File

@ -3,3 +3,11 @@
*/ */
#include "pins_RAMPS_13.h" #include "pins_RAMPS_13.h"
#define FAN_PIN 9 // (Sprinter config)
#define HEATER_1_PIN -1
#ifdef TEMP_STAT_LEDS
#define STAT_LED_RED 6
#define STAT_LED_BLUE 11
#endif

View File

@ -4,6 +4,9 @@
#include "pins_RAMPS_13.h" #include "pins_RAMPS_13.h"
#define FAN_PIN 9 // (Sprinter config)
#define BEEPER 33
#define E2_STEP_PIN 23 #define E2_STEP_PIN 23
#define E2_DIR_PIN 25 #define E2_DIR_PIN 25
#define E2_ENABLE_PIN 40 #define E2_ENABLE_PIN 40
@ -16,6 +19,7 @@
#define E4_DIR_PIN 37 #define E4_DIR_PIN 37
#define E4_ENABLE_PIN 42 #define E4_ENABLE_PIN 42
#define HEATER_1_PIN -1
#define HEATER_2_PIN 16 #define HEATER_2_PIN 16
#define HEATER_3_PIN 17 #define HEATER_3_PIN 17
#define HEATER_4_PIN 4 #define HEATER_4_PIN 4

View File

@ -1,183 +1,11 @@
/** /**
* Arduino Mega with BAM&DICE DUE pin assignments * BAM&DICE Due (Arduino Mega) pin assignments
*
* Applies to the following boards:
*
* BAM&DICE Due with Arduino Mega
*/ */
#if !defined(__AVR_ATmega1280__) && !defined(__AVR_ATmega2560__) #include "pins_RAMPS_13.h"
#error Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu.
#endif
#define LARGE_FLASH true
#define X_STEP_PIN 54
#define X_DIR_PIN 55
#define X_ENABLE_PIN 38
#define X_MIN_PIN 3
#define X_MAX_PIN 2
#define Y_STEP_PIN 60
#define Y_DIR_PIN 61
#define Y_ENABLE_PIN 56
#define Y_MIN_PIN 14
#define Y_MAX_PIN 15
#define Z_STEP_PIN 46
#define Z_DIR_PIN 48
#define Z_ENABLE_PIN 62
#define Z_MIN_PIN 18
#define Z_MAX_PIN 19
#define Y2_STEP_PIN 36
#define Y2_DIR_PIN 34
#define Y2_ENABLE_PIN 30
#define Z2_STEP_PIN 36
#define Z2_DIR_PIN 34
#define Z2_ENABLE_PIN 30
#define E0_STEP_PIN 26
#define E0_DIR_PIN 28
#define E0_ENABLE_PIN 24
#define E1_STEP_PIN 36
#define E1_DIR_PIN 34
#define E1_ENABLE_PIN 30
#define SDPOWER -1
#define SDSS 53
#define LED_PIN 13
#define FAN_PIN 9 // (Sprinter config) #define FAN_PIN 9 // (Sprinter config)
#define PS_ON_PIN 12
#if defined(REPRAP_DISCOUNT_SMART_CONTROLLER) || defined(G3D_PANEL)
#define KILL_PIN 41
#else
#define KILL_PIN -1
#endif
#define HEATER_0_PIN 10
#define HEATER_1_PIN -1 #define HEATER_1_PIN -1
#define HEATER_2_PIN -1
#define TEMP_0_PIN 9 // ANALOG NUMBERING #define TEMP_0_PIN 9 // ANALOG NUMBERING
#define TEMP_1_PIN 11 // ANALOG NUMBERING #define TEMP_1_PIN 11 // ANALOG NUMBERING
#define TEMP_2_PIN -1 // ANALOG NUMBERING
#define HEATER_BED_PIN 8 // BED
#define TEMP_BED_PIN 14 // ANALOG NUMBERING
#ifdef NUM_SERVOS
#define SERVO0_PIN 11
#if NUM_SERVOS > 1
#define SERVO1_PIN 6
#endif
#if NUM_SERVOS > 2
#define SERVO2_PIN 5
#endif
#if NUM_SERVOS > 3
#define SERVO3_PIN 4
#endif
#endif
#ifdef ULTRA_LCD
#ifdef NEWPANEL
#define LCD_PINS_RS 16
#define LCD_PINS_ENABLE 17
#define LCD_PINS_D4 23
#define LCD_PINS_D5 25
#define LCD_PINS_D6 27
#define LCD_PINS_D7 29
#ifdef REPRAP_DISCOUNT_SMART_CONTROLLER
#define BEEPER 37
#define BTN_EN1 31
#define BTN_EN2 33
#define BTN_ENC 35
#define SDCARDDETECT 49
#elif defined(LCD_I2C_PANELOLU2)
#define BTN_EN1 47 // reverse if the encoder turns the wrong way.
#define BTN_EN2 43
#define BTN_ENC 32
#define LCD_SDSS 53
#define SDCARDDETECT -1
#define KILL_PIN 41
#elif defined(LCD_I2C_VIKI)
#define BTN_EN1 22 // reverse if the encoder turns the wrong way.
#define BTN_EN2 7
#define BTN_ENC -1
#define LCD_SDSS 53
#define SDCARDDETECT 49
#else
// arduino pin which triggers an piezzo beeper
#define BEEPER 33 // Beeper on AUX-4
// buttons are directly attached using AUX-2
#ifdef REPRAPWORLD_KEYPAD
#define BTN_EN1 64 // encoder
#define BTN_EN2 59 // encoder
#define BTN_ENC 63 // enter button
#define SHIFT_OUT 40 // shift register
#define SHIFT_CLK 44 // shift register
#define SHIFT_LD 42 // shift register
#else
#define BTN_EN1 37
#define BTN_EN2 35
#define BTN_ENC 31 // the click
#endif
#ifdef G3D_PANEL
#define SDCARDDETECT 49
#else
#define SDCARDDETECT -1 // Ramps does not use this port
#endif
#endif
#else // Old-style panel with shift register
// Arduino pin witch triggers an piezzo beeper
#define BEEPER 33 // No Beeper added
// Buttons are attached to a shift register
// Not wired yet
// #define SHIFT_CLK 38
// #define SHIFT_LD 42
// #define SHIFT_OUT 40
// #define SHIFT_EN 17
#define LCD_PINS_RS 16
#define LCD_PINS_ENABLE 17
#define LCD_PINS_D4 23
#define LCD_PINS_D5 25
#define LCD_PINS_D6 27
#define LCD_PINS_D7 29
#endif
#endif // ULTRA_LCD
// SPI for Max6675 Thermocouple
#ifndef SDSUPPORT
#define MAX6675_SS 66 // Do not use pin 53 if there is even the remote possibility of using Display/SD card
#else
#define MAX6675_SS 66 // Do not use pin 49 as this is tied to the switch inside the SD card socket to detect if there is an SD card present
#endif
#ifndef SDSUPPORT
// these pins are defined in the SD library if building with SD support
#define SCK_PIN 52
#define MISO_PIN 50
#define MOSI_PIN 51
#endif

View File

@ -3,3 +3,6 @@
*/ */
#include "pins_RAMPS_13.h" #include "pins_RAMPS_13.h"
#define FAN_PIN 9 // (Sprinter config)
#define HEATER_1_PIN -1

View File

@ -7,10 +7,8 @@
* RAMPS_13_EEB (Extruder, Extruder, Bed) * RAMPS_13_EEB (Extruder, Extruder, Bed)
* RAMPS_13_EFF (Extruder, Fan, Fan) * RAMPS_13_EFF (Extruder, Fan, Fan)
* RAMPS_13_EEF (Extruder, Extruder, Fan) * RAMPS_13_EEF (Extruder, Extruder, Fan)
* 3DRAG *
* K8200 * Other pins_MYBOARD.h files may override these defaults
* AZTEEG_X3
* AZTEEG_X3_PRO
*/ */
#if !defined(__AVR_ATmega1280__) && !defined(__AVR_ATmega2560__) #if !defined(__AVR_ATmega1280__) && !defined(__AVR_ATmega2560__)
@ -63,7 +61,7 @@
#define FILWIDTH_PIN 5 #define FILWIDTH_PIN 5
#endif #endif
#if MB(RAMPS_13_EFB) || MB(RAMPS_13_EFF) || MB(AZTEEG_X3) || MB(AZTEEG_X3_PRO) || MB(WITBOX) || MB(HEPHESTOS) #if MB(RAMPS_13_EFB) || MB(RAMPS_13_EFF)
#define FAN_PIN 9 // (Sprinter config) #define FAN_PIN 9 // (Sprinter config)
#if MB(RAMPS_13_EFF) #if MB(RAMPS_13_EFF)
#define CONTROLLERFAN_PIN -1 // Pin used for the fan to cool controller #define CONTROLLERFAN_PIN -1 // Pin used for the fan to cool controller
@ -88,7 +86,7 @@
#define HEATER_0_PIN 10 // EXTRUDER 1 #define HEATER_0_PIN 10 // EXTRUDER 1
#endif #endif
#if MB(RAMPS_13_EFB) || MB(AZTEEG_X3) || MB(WITBOX) || MB(HEPHESTOS) #if MB(RAMPS_13_EFB)
#define HEATER_1_PIN -1 #define HEATER_1_PIN -1
#else #else
#define HEATER_1_PIN 9 // EXTRUDER 2 (FAN On Sprinter) #define HEATER_1_PIN 9 // EXTRUDER 2 (FAN On Sprinter)
@ -110,28 +108,14 @@
#ifdef NUM_SERVOS #ifdef NUM_SERVOS
#define SERVO0_PIN 11 #define SERVO0_PIN 11
#if NUM_SERVOS > 1 #if NUM_SERVOS > 1
#define SERVO1_PIN 6 #define SERVO1_PIN 6
#endif
#if NUM_SERVOS > 2 #if NUM_SERVOS > 2
#define SERVO2_PIN 5 #define SERVO2_PIN 5
#endif
#if NUM_SERVOS > 3 #if NUM_SERVOS > 3
#define SERVO3_PIN 4 #define SERVO3_PIN 4
#endif #endif
#endif #endif
#if MB(AZTEEG_X3_PRO)
#define BEEPER 33
#endif
#ifdef TEMP_STAT_LEDS
#if MB(AZTEEG_X3)
#define STAT_LED_RED 6
#define STAT_LED_BLUE 11
#endif #endif
#endif #endif

View File

@ -3,3 +3,6 @@
*/ */
#include "pins_RAMPS_13.h" #include "pins_RAMPS_13.h"
#define FAN_PIN 9 // (Sprinter config)
#define HEATER_1_PIN -1

View File

@ -460,14 +460,12 @@ void checkExtruderAutoFans()
#endif #endif
#if defined(EXTRUDER_2_AUTO_FAN_PIN) && EXTRUDER_2_AUTO_FAN_PIN > -1 #if defined(EXTRUDER_2_AUTO_FAN_PIN) && EXTRUDER_2_AUTO_FAN_PIN > -1
if (EXTRUDER_2_AUTO_FAN_PIN != EXTRUDER_0_AUTO_FAN_PIN if (EXTRUDER_2_AUTO_FAN_PIN != EXTRUDER_0_AUTO_FAN_PIN
&& EXTRUDER_2_AUTO_FAN_PIN != EXTRUDER_0_AUTO_FAN_PIN)
&& EXTRUDER_2_AUTO_FAN_PIN != EXTRUDER_1_AUTO_FAN_PIN) && EXTRUDER_2_AUTO_FAN_PIN != EXTRUDER_1_AUTO_FAN_PIN)
setExtruderAutoFanState(EXTRUDER_2_AUTO_FAN_PIN, (fanState & 4) != 0); setExtruderAutoFanState(EXTRUDER_2_AUTO_FAN_PIN, (fanState & 4) != 0);
#endif #endif
#if defined(EXTRUDER_3_AUTO_FAN_PIN) && EXTRUDER_3_AUTO_FAN_PIN > -1 #if defined(EXTRUDER_3_AUTO_FAN_PIN) && EXTRUDER_3_AUTO_FAN_PIN > -1
if (EXTRUDER_3_AUTO_FAN_PIN != EXTRUDER_0_AUTO_FAN_PIN if (EXTRUDER_3_AUTO_FAN_PIN != EXTRUDER_0_AUTO_FAN_PIN
&& EXTRUDER_3_AUTO_FAN_PIN != EXTRUDER_0_AUTO_FAN_PIN) && EXTRUDER_3_AUTO_FAN_PIN != EXTRUDER_1_AUTO_FAN_PIN
&& EXTRUDER_3_AUTO_FAN_PIN != EXTRUDER_1_AUTO_FAN_PIN)
&& EXTRUDER_3_AUTO_FAN_PIN != EXTRUDER_2_AUTO_FAN_PIN) && EXTRUDER_3_AUTO_FAN_PIN != EXTRUDER_2_AUTO_FAN_PIN)
setExtruderAutoFanState(EXTRUDER_3_AUTO_FAN_PIN, (fanState & 8) != 0); setExtruderAutoFanState(EXTRUDER_3_AUTO_FAN_PIN, (fanState & 8) != 0);
#endif #endif