Add Copymaster3D board (#17188)

This commit is contained in:
RasmusAaen 2020-03-17 21:25:10 +01:00 committed by GitHub
parent 1f5824247f
commit c768605bde
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
8 changed files with 114 additions and 1 deletions

View File

@ -363,6 +363,7 @@
* 331 : (3.3V scaled thermistor 1 table for MEGA)
* 332 : (3.3V scaled thermistor 1 table for DUE)
* 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
* 202 : 200k thermistor - Copymaster 3D
* 3 : Mendel-parts thermistor (4.7k pullup)
* 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
* 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup)

View File

@ -267,6 +267,8 @@ else ifeq ($(HARDWARE_MOTHERBOARD),1147)
else ifeq ($(HARDWARE_MOTHERBOARD),1148)
# MKS GEN L V2
else ifeq ($(HARDWARE_MOTHERBOARD),1149)
# Copymaster 3D
else ifeq ($(HARDWARE_MOTHERBOARD),1150)
#
# RAMBo and derivatives

View File

@ -103,6 +103,7 @@
#define BOARD_HJC2560C_REV2 1147 // ADIMLab Gantry v2
#define BOARD_TANGO 1148 // BIQU Tango V1
#define BOARD_MKS_GEN_L_V2 1149 // MKS GEN L V2
#define BOARD_COPYMASTER_3D 1150 // Copymaster 3D
//
// RAMBo and derivatives

View File

@ -0,0 +1,69 @@
//
// Unknown 200K thermistor on a Copymaster 3D hotend
// Temptable sent from dealer technologyoutlet.co.uk
//
const short temptable_202[][2] PROGMEM = {
{ OV( 1), 864 },
{ OV( 35), 300 },
{ OV( 38), 295 },
{ OV( 41), 290 },
{ OV( 44), 285 },
{ OV( 47), 280 },
{ OV( 51), 275 },
{ OV( 55), 270 },
{ OV( 60), 265 },
{ OV( 65), 260 },
{ OV( 70), 255 },
{ OV( 76), 250 },
{ OV( 83), 245 },
{ OV( 90), 240 },
{ OV( 98), 235 },
{ OV( 107), 230 },
{ OV( 116), 225 },
{ OV( 127), 220 },
{ OV( 138), 215 },
{ OV( 151), 210 },
{ OV( 164), 205 },
{ OV( 179), 200 },
{ OV( 195), 195 },
{ OV( 213), 190 },
{ OV( 232), 185 },
{ OV( 253), 180 },
{ OV( 275), 175 },
{ OV( 299), 170 },
{ OV( 325), 165 },
{ OV( 352), 160 },
{ OV( 381), 155 },
{ OV( 411), 150 },
{ OV( 443), 145 },
{ OV( 476), 140 },
{ OV( 511), 135 },
{ OV( 546), 130 },
{ OV( 581), 125 },
{ OV( 617), 120 },
{ OV( 652), 115 },
{ OV( 687), 110 },
{ OV( 720), 105 },
{ OV( 753), 100 },
{ OV( 783), 95 },
{ OV( 812), 90 },
{ OV( 839), 85 },
{ OV( 864), 80 },
{ OV( 886), 75 },
{ OV( 906), 70 },
{ OV( 924), 65 },
{ OV( 940), 60 },
{ OV( 954), 55 },
{ OV( 966), 50 },
{ OV( 976), 45 },
{ OV( 985), 40 },
{ OV( 992), 35 },
{ OV( 998), 30 },
{ OV(1003), 25 },
{ OV(1007), 20 },
{ OV(1011), 15 },
{ OV(1014), 10 },
{ OV(1016), 5 },
{ OV(1018), 0 }
};

View File

@ -151,6 +151,9 @@
#if ANY_THERMISTOR_IS(201) // Pt100 with LMV324 Overlord
#include "thermistor_201.h"
#endif
#if ANY_THERMISTOR_IS(202) // 200K thermistor in Copymaker3D hotend
#include "thermistor_202.h"
#endif
#if ANY_THERMISTOR_IS(331) // Like table 1, but with 3V3 as input voltage for MEGA
#include "thermistor_331.h"
#endif

View File

@ -188,6 +188,8 @@
#include "ramps/pins_TANGO.h" // ATmega2560 env:mega2560
#elif MB(MKS_GEN_L_V2)
#include "ramps/pins_MKS_GEN_L_V2.h" // ATmega2560 env:mega2560
#elif MB(COPYMASTER_3D)
#include "ramps/pins_COPYMASTER_3D.h" // ATmega2560 env:mega2560
//
// RAMBo and derivatives

View File

@ -0,0 +1,33 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#pragma once
#define BOARD_INFO_NAME "Copymaster 3D RAMPS"
#define Z_STEP_PIN 47
#define FIL_RUNOUT_PIN 15
#define SD_DETECT_PIN 66
//
// Import RAMPS 1.4 pins
//
#include "pins_RAMPS.h"

View File

@ -133,7 +133,9 @@
#define Y_CS_PIN 49
#endif
#ifndef Z_STEP_PIN
#define Z_STEP_PIN 46
#endif
#define Z_DIR_PIN 48
#define Z_ENABLE_PIN 62
#ifndef Z_CS_PIN