midopple
commit
c7273d521f
1
.gitignore
vendored
1
.gitignore
vendored
@ -3,3 +3,4 @@ applet/
|
||||
*~
|
||||
*.orig
|
||||
*.rej
|
||||
*.bak
|
||||
|
||||
@ -44,9 +44,9 @@ atmega12848m.upload.protocol=stk500
|
||||
atmega12848m.upload.maximum_size=131072
|
||||
atmega12848m.upload.speed=19200
|
||||
|
||||
atmega12848m.bootloader.low_fuses=0xFD
|
||||
atmega12848m.bootloader.high_fuses=0x9A
|
||||
atmega12848m.bootloader.extended_fuses=0xFF
|
||||
atmega12848m.bootloader.low_fuses=0xD6
|
||||
atmega12848m.bootloader.high_fuses=0xDA
|
||||
atmega12848m.bootloader.extended_fuses=0xFD
|
||||
atmega12848m.bootloader.path=atmega
|
||||
atmega12848m.bootloader.file=ATmegaBOOT_168_atmega1284p_8m.hex
|
||||
atmega12848m.bootloader.unlock_bits=0x3F
|
||||
@ -64,9 +64,9 @@ atmega1284.upload.protocol=stk500
|
||||
atmega1284.upload.maximum_size=131072
|
||||
atmega1284.upload.speed=57600
|
||||
|
||||
atmega1284.bootloader.low_fuses=0xFF
|
||||
atmega1284.bootloader.high_fuses=0x9A
|
||||
atmega1284.bootloader.extended_fuses=0xFF
|
||||
atmega1284.bootloader.low_fuses=0xD6
|
||||
atmega1284.bootloader.high_fuses=0xDA
|
||||
atmega1284.bootloader.extended_fuses=0xFD
|
||||
atmega1284.bootloader.path=atmega
|
||||
atmega1284.bootloader.file=ATmegaBOOT_168_atmega1284p.hex
|
||||
atmega1284.bootloader.unlock_bits=0x3F
|
||||
@ -85,9 +85,9 @@ atmega1284s.upload.protocol=stk500
|
||||
atmega1284s.upload.maximum_size=131072
|
||||
atmega1284s.upload.speed=57600
|
||||
|
||||
atmega1284s.bootloader.low_fuses=0xFF
|
||||
atmega1284s.bootloader.high_fuses=0x9A
|
||||
atmega1284s.bootloader.extended_fuses=0xFF
|
||||
atmega1284s.bootloader.low_fuses=0xD6
|
||||
atmega1284s.bootloader.high_fuses=0xDA
|
||||
atmega1284s.bootloader.extended_fuses=0xFD
|
||||
atmega1284s.bootloader.path=atmega
|
||||
atmega1284s.bootloader.file=ATmegaBOOT_168_atmega1284p.hex
|
||||
atmega1284s.bootloader.unlock_bits=0x3F
|
||||
|
||||
@ -27,9 +27,9 @@ atmega12848m.upload.protocol=stk500
|
||||
atmega12848m.upload.maximum_size=131072
|
||||
atmega12848m.upload.speed=19200
|
||||
|
||||
atmega12848m.bootloader.low_fuses=0xFD
|
||||
atmega12848m.bootloader.high_fuses=0x9A
|
||||
atmega12848m.bootloader.extended_fuses=0xFF
|
||||
atmega1284.bootloader.low_fuses=0xD6
|
||||
atmega1284.bootloader.high_fuses=0xDA
|
||||
atmega1284.bootloader.extended_fuses=0xFD
|
||||
atmega12848m.bootloader.path=atmega
|
||||
atmega12848m.bootloader.file=ATmegaBOOT_168_atmega1284p_8m.hex
|
||||
atmega12848m.bootloader.unlock_bits=0x3F
|
||||
@ -48,9 +48,9 @@ atmega1284.upload.protocol=stk500
|
||||
atmega1284.upload.maximum_size=131072
|
||||
atmega1284.upload.speed=57600
|
||||
|
||||
atmega1284.bootloader.low_fuses=0xFF
|
||||
atmega1284.bootloader.high_fuses=0x9A
|
||||
atmega1284.bootloader.extended_fuses=0xFF
|
||||
atmega1284.bootloader.low_fuses=0xD6
|
||||
atmega1284.bootloader.high_fuses=0xDA
|
||||
atmega1284.bootloader.extended_fuses=0xFD
|
||||
atmega1284.bootloader.path=atmega
|
||||
atmega1284.bootloader.file=ATmegaBOOT_168_atmega1284p.hex
|
||||
atmega1284.bootloader.unlock_bits=0x3F
|
||||
@ -60,4 +60,24 @@ atmega1284.build.mcu=atmega1284p
|
||||
atmega1284.build.f_cpu=16000000L
|
||||
atmega1284.build.core=arduino
|
||||
atmega1284.build.variant=standard
|
||||
##############################################################
|
||||
|
||||
atmega1284m.name=Sanguino W/ ATmega1284p 20mhz
|
||||
|
||||
atmega1284m.upload.protocol=stk500
|
||||
atmega1284m.upload.maximum_size=131072
|
||||
atmega1284m.upload.speed=57600
|
||||
|
||||
atmega1284m.bootloader.low_fuses=0xD6
|
||||
atmega1284m.bootloader.high_fuses=0xDA
|
||||
atmega1284m.bootloader.extended_fuses=0xFD
|
||||
atmega1284m.bootloader.path=atmega
|
||||
atmega1284m.bootloader.file=ATmegaBOOT_168_atmega1284p.hex
|
||||
atmega1284m.bootloader.unlock_bits=0x3F
|
||||
atmega1284m.bootloader.lock_bits=0x0F
|
||||
|
||||
atmega1284m.build.mcu=atmega1284p
|
||||
atmega1284m.build.f_cpu=20000000L
|
||||
atmega1284m.build.core=arduino
|
||||
atmega1284m.build.variant=standard
|
||||
#
|
||||
22
ArduinoAddons/Arduino_1.x.x/hardware/rambo/boards.txt
Normal file
22
ArduinoAddons/Arduino_1.x.x/hardware/rambo/boards.txt
Normal file
@ -0,0 +1,22 @@
|
||||
# See: http://code.google.com/p/arduino/wiki/Platforms
|
||||
|
||||
##############################################################
|
||||
|
||||
mega2560.name=RAMBo
|
||||
|
||||
mega2560.upload.protocol=wiring
|
||||
mega2560.upload.maximum_size=258048
|
||||
mega2560.upload.speed=115200
|
||||
|
||||
mega2560.bootloader.low_fuses=0xFF
|
||||
mega2560.bootloader.high_fuses=0xD8
|
||||
mega2560.bootloader.extended_fuses=0xFD
|
||||
mega2560.bootloader.path=stk500v2
|
||||
mega2560.bootloader.file=stk500boot_v2_mega2560.hex
|
||||
mega2560.bootloader.unlock_bits=0x3F
|
||||
mega2560.bootloader.lock_bits=0x0F
|
||||
|
||||
mega2560.build.mcu=atmega2560
|
||||
mega2560.build.f_cpu=16000000L
|
||||
mega2560.build.core=arduino
|
||||
mega2560.build.variant=standard
|
||||
@ -0,0 +1,215 @@
|
||||
#ifndef Arduino_h
|
||||
#define Arduino_h
|
||||
|
||||
#include <stdlib.h>
|
||||
#include <string.h>
|
||||
#include <math.h>
|
||||
|
||||
#include <avr/pgmspace.h>
|
||||
#include <avr/io.h>
|
||||
#include <avr/interrupt.h>
|
||||
|
||||
#include "binary.h"
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C"{
|
||||
#endif
|
||||
|
||||
#define HIGH 0x1
|
||||
#define LOW 0x0
|
||||
|
||||
#define INPUT 0x0
|
||||
#define OUTPUT 0x1
|
||||
#define INPUT_PULLUP 0x2
|
||||
|
||||
#define true 0x1
|
||||
#define false 0x0
|
||||
|
||||
#define PI 3.1415926535897932384626433832795
|
||||
#define HALF_PI 1.5707963267948966192313216916398
|
||||
#define TWO_PI 6.283185307179586476925286766559
|
||||
#define DEG_TO_RAD 0.017453292519943295769236907684886
|
||||
#define RAD_TO_DEG 57.295779513082320876798154814105
|
||||
|
||||
#define SERIAL 0x0
|
||||
#define DISPLAY 0x1
|
||||
|
||||
#define LSBFIRST 0
|
||||
#define MSBFIRST 1
|
||||
|
||||
#define CHANGE 1
|
||||
#define FALLING 2
|
||||
#define RISING 3
|
||||
|
||||
#if defined(__AVR_ATtiny24__) || defined(__AVR_ATtiny44__) || defined(__AVR_ATtiny84__) || defined(__AVR_ATtiny25__) || defined(__AVR_ATtiny45__) || defined(__AVR_ATtiny85__)
|
||||
#define DEFAULT 0
|
||||
#define EXTERNAL 1
|
||||
#define INTERNAL 2
|
||||
#else
|
||||
#if defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__) || defined(__AVR_ATmega1284P__) || defined(__AVR_ATmega644P__)
|
||||
#define INTERNAL1V1 2
|
||||
#define INTERNAL2V56 3
|
||||
#else
|
||||
#define INTERNAL 3
|
||||
#endif
|
||||
#define DEFAULT 1
|
||||
#define EXTERNAL 0
|
||||
#endif
|
||||
|
||||
// undefine stdlib's abs if encountered
|
||||
#ifdef abs
|
||||
#undef abs
|
||||
#endif
|
||||
|
||||
#define min(a,b) ((a)<(b)?(a):(b))
|
||||
#define max(a,b) ((a)>(b)?(a):(b))
|
||||
#define abs(x) ((x)>0?(x):-(x))
|
||||
#define constrain(amt,low,high) ((amt)<(low)?(low):((amt)>(high)?(high):(amt)))
|
||||
#define round(x) ((x)>=0?(long)((x)+0.5):(long)((x)-0.5))
|
||||
#define radians(deg) ((deg)*DEG_TO_RAD)
|
||||
#define degrees(rad) ((rad)*RAD_TO_DEG)
|
||||
#define sq(x) ((x)*(x))
|
||||
|
||||
#define interrupts() sei()
|
||||
#define noInterrupts() cli()
|
||||
|
||||
#define clockCyclesPerMicrosecond() ( F_CPU / 1000000L )
|
||||
#define clockCyclesToMicroseconds(a) ( (a) / clockCyclesPerMicrosecond() )
|
||||
#define microsecondsToClockCycles(a) ( (a) * clockCyclesPerMicrosecond() )
|
||||
|
||||
#define lowByte(w) ((uint8_t) ((w) & 0xff))
|
||||
#define highByte(w) ((uint8_t) ((w) >> 8))
|
||||
|
||||
#define bitRead(value, bit) (((value) >> (bit)) & 0x01)
|
||||
#define bitSet(value, bit) ((value) |= (1UL << (bit)))
|
||||
#define bitClear(value, bit) ((value) &= ~(1UL << (bit)))
|
||||
#define bitWrite(value, bit, bitvalue) (bitvalue ? bitSet(value, bit) : bitClear(value, bit))
|
||||
|
||||
|
||||
typedef unsigned int word;
|
||||
|
||||
#define bit(b) (1UL << (b))
|
||||
|
||||
typedef uint8_t boolean;
|
||||
typedef uint8_t byte;
|
||||
|
||||
void init(void);
|
||||
|
||||
void pinMode(uint8_t, uint8_t);
|
||||
void digitalWrite(uint8_t, uint8_t);
|
||||
int digitalRead(uint8_t);
|
||||
int analogRead(uint8_t);
|
||||
void analogReference(uint8_t mode);
|
||||
void analogWrite(uint8_t, int);
|
||||
|
||||
unsigned long millis(void);
|
||||
unsigned long micros(void);
|
||||
void delay(unsigned long);
|
||||
void delayMicroseconds(unsigned int us);
|
||||
unsigned long pulseIn(uint8_t pin, uint8_t state, unsigned long timeout);
|
||||
|
||||
void shiftOut(uint8_t dataPin, uint8_t clockPin, uint8_t bitOrder, uint8_t val);
|
||||
uint8_t shiftIn(uint8_t dataPin, uint8_t clockPin, uint8_t bitOrder);
|
||||
|
||||
void attachInterrupt(uint8_t, void (*)(void), int mode);
|
||||
void detachInterrupt(uint8_t);
|
||||
|
||||
void setup(void);
|
||||
void loop(void);
|
||||
|
||||
// Get the bit location within the hardware port of the given virtual pin.
|
||||
// This comes from the pins_*.c file for the active board configuration.
|
||||
|
||||
#define analogInPinToBit(P) (P)
|
||||
|
||||
// On the ATmega1280, the addresses of some of the port registers are
|
||||
// greater than 255, so we can't store them in uint8_t's.
|
||||
extern const uint16_t PROGMEM port_to_mode_PGM[];
|
||||
extern const uint16_t PROGMEM port_to_input_PGM[];
|
||||
extern const uint16_t PROGMEM port_to_output_PGM[];
|
||||
|
||||
extern const uint8_t PROGMEM digital_pin_to_port_PGM[];
|
||||
// extern const uint8_t PROGMEM digital_pin_to_bit_PGM[];
|
||||
extern const uint8_t PROGMEM digital_pin_to_bit_mask_PGM[];
|
||||
extern const uint8_t PROGMEM digital_pin_to_timer_PGM[];
|
||||
|
||||
// Get the bit location within the hardware port of the given virtual pin.
|
||||
// This comes from the pins_*.c file for the active board configuration.
|
||||
//
|
||||
// These perform slightly better as macros compared to inline functions
|
||||
//
|
||||
#define digitalPinToPort(P) ( pgm_read_byte( digital_pin_to_port_PGM + (P) ) )
|
||||
#define digitalPinToBitMask(P) ( pgm_read_byte( digital_pin_to_bit_mask_PGM + (P) ) )
|
||||
#define digitalPinToTimer(P) ( pgm_read_byte( digital_pin_to_timer_PGM + (P) ) )
|
||||
#define analogInPinToBit(P) (P)
|
||||
#define portOutputRegister(P) ( (volatile uint8_t *)( pgm_read_word( port_to_output_PGM + (P))) )
|
||||
#define portInputRegister(P) ( (volatile uint8_t *)( pgm_read_word( port_to_input_PGM + (P))) )
|
||||
#define portModeRegister(P) ( (volatile uint8_t *)( pgm_read_word( port_to_mode_PGM + (P))) )
|
||||
|
||||
#define NOT_A_PIN 0
|
||||
#define NOT_A_PORT 0
|
||||
|
||||
#ifdef ARDUINO_MAIN
|
||||
#define PA 1
|
||||
#define PB 2
|
||||
#define PC 3
|
||||
#define PD 4
|
||||
#define PE 5
|
||||
#define PF 6
|
||||
#define PG 7
|
||||
#define PH 8
|
||||
#define PJ 10
|
||||
#define PK 11
|
||||
#define PL 12
|
||||
#endif
|
||||
|
||||
#define NOT_ON_TIMER 0
|
||||
#define TIMER0A 1
|
||||
#define TIMER0B 2
|
||||
#define TIMER1A 3
|
||||
#define TIMER1B 4
|
||||
#define TIMER2 5
|
||||
#define TIMER2A 6
|
||||
#define TIMER2B 7
|
||||
|
||||
#define TIMER3A 8
|
||||
#define TIMER3B 9
|
||||
#define TIMER3C 10
|
||||
#define TIMER4A 11
|
||||
#define TIMER4B 12
|
||||
#define TIMER4C 13
|
||||
#define TIMER4D 14
|
||||
#define TIMER5A 15
|
||||
#define TIMER5B 16
|
||||
#define TIMER5C 17
|
||||
|
||||
#ifdef __cplusplus
|
||||
} // extern "C"
|
||||
#endif
|
||||
|
||||
#ifdef __cplusplus
|
||||
#include "WCharacter.h"
|
||||
#include "WString.h"
|
||||
#include "HardwareSerial.h"
|
||||
|
||||
uint16_t makeWord(uint16_t w);
|
||||
uint16_t makeWord(byte h, byte l);
|
||||
|
||||
#define word(...) makeWord(__VA_ARGS__)
|
||||
|
||||
unsigned long pulseIn(uint8_t pin, uint8_t state, unsigned long timeout = 1000000L);
|
||||
|
||||
void tone(uint8_t _pin, unsigned int frequency, unsigned long duration = 0);
|
||||
void noTone(uint8_t _pin);
|
||||
|
||||
// WMath prototypes
|
||||
long random(long);
|
||||
long random(long, long);
|
||||
void randomSeed(unsigned int);
|
||||
long map(long, long, long, long, long);
|
||||
|
||||
#endif
|
||||
|
||||
#include "pins_arduino.h"
|
||||
|
||||
#endif
|
||||
239
ArduinoAddons/Arduino_1.x.x/hardware/rambo/cores/arduino/CDC.cpp
Normal file
239
ArduinoAddons/Arduino_1.x.x/hardware/rambo/cores/arduino/CDC.cpp
Normal file
@ -0,0 +1,239 @@
|
||||
|
||||
|
||||
/* Copyright (c) 2011, Peter Barrett
|
||||
**
|
||||
** Permission to use, copy, modify, and/or distribute this software for
|
||||
** any purpose with or without fee is hereby granted, provided that the
|
||||
** above copyright notice and this permission notice appear in all copies.
|
||||
**
|
||||
** THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL
|
||||
** WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED
|
||||
** WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR
|
||||
** BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES
|
||||
** OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS,
|
||||
** WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION,
|
||||
** ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS
|
||||
** SOFTWARE.
|
||||
*/
|
||||
|
||||
#include "Platform.h"
|
||||
#include "USBAPI.h"
|
||||
#include <avr/wdt.h>
|
||||
|
||||
#if defined(USBCON)
|
||||
#ifdef CDC_ENABLED
|
||||
|
||||
#if (RAMEND < 1000)
|
||||
#define SERIAL_BUFFER_SIZE 16
|
||||
#else
|
||||
#define SERIAL_BUFFER_SIZE 64
|
||||
#endif
|
||||
|
||||
struct ring_buffer
|
||||
{
|
||||
unsigned char buffer[SERIAL_BUFFER_SIZE];
|
||||
volatile int head;
|
||||
volatile int tail;
|
||||
};
|
||||
|
||||
ring_buffer cdc_rx_buffer = { { 0 }, 0, 0};
|
||||
|
||||
typedef struct
|
||||
{
|
||||
u32 dwDTERate;
|
||||
u8 bCharFormat;
|
||||
u8 bParityType;
|
||||
u8 bDataBits;
|
||||
u8 lineState;
|
||||
} LineInfo;
|
||||
|
||||
static volatile LineInfo _usbLineInfo = { 57600, 0x00, 0x00, 0x00, 0x00 };
|
||||
|
||||
#define WEAK __attribute__ ((weak))
|
||||
|
||||
extern const CDCDescriptor _cdcInterface PROGMEM;
|
||||
const CDCDescriptor _cdcInterface =
|
||||
{
|
||||
D_IAD(0,2,CDC_COMMUNICATION_INTERFACE_CLASS,CDC_ABSTRACT_CONTROL_MODEL,1),
|
||||
|
||||
// CDC communication interface
|
||||
D_INTERFACE(CDC_ACM_INTERFACE,1,CDC_COMMUNICATION_INTERFACE_CLASS,CDC_ABSTRACT_CONTROL_MODEL,0),
|
||||
D_CDCCS(CDC_HEADER,0x10,0x01), // Header (1.10 bcd)
|
||||
D_CDCCS(CDC_CALL_MANAGEMENT,1,1), // Device handles call management (not)
|
||||
D_CDCCS4(CDC_ABSTRACT_CONTROL_MANAGEMENT,6), // SET_LINE_CODING, GET_LINE_CODING, SET_CONTROL_LINE_STATE supported
|
||||
D_CDCCS(CDC_UNION,CDC_ACM_INTERFACE,CDC_DATA_INTERFACE), // Communication interface is master, data interface is slave 0
|
||||
D_ENDPOINT(USB_ENDPOINT_IN (CDC_ENDPOINT_ACM),USB_ENDPOINT_TYPE_INTERRUPT,0x10,0x40),
|
||||
|
||||
// CDC data interface
|
||||
D_INTERFACE(CDC_DATA_INTERFACE,2,CDC_DATA_INTERFACE_CLASS,0,0),
|
||||
D_ENDPOINT(USB_ENDPOINT_OUT(CDC_ENDPOINT_OUT),USB_ENDPOINT_TYPE_BULK,0x40,0),
|
||||
D_ENDPOINT(USB_ENDPOINT_IN (CDC_ENDPOINT_IN ),USB_ENDPOINT_TYPE_BULK,0x40,0)
|
||||
};
|
||||
|
||||
int WEAK CDC_GetInterface(u8* interfaceNum)
|
||||
{
|
||||
interfaceNum[0] += 2; // uses 2
|
||||
return USB_SendControl(TRANSFER_PGM,&_cdcInterface,sizeof(_cdcInterface));
|
||||
}
|
||||
|
||||
bool WEAK CDC_Setup(Setup& setup)
|
||||
{
|
||||
u8 r = setup.bRequest;
|
||||
u8 requestType = setup.bmRequestType;
|
||||
|
||||
if (REQUEST_DEVICETOHOST_CLASS_INTERFACE == requestType)
|
||||
{
|
||||
if (CDC_GET_LINE_CODING == r)
|
||||
{
|
||||
USB_SendControl(0,(void*)&_usbLineInfo,7);
|
||||
return true;
|
||||
}
|
||||
}
|
||||
|
||||
if (REQUEST_HOSTTODEVICE_CLASS_INTERFACE == requestType)
|
||||
{
|
||||
if (CDC_SET_LINE_CODING == r)
|
||||
{
|
||||
USB_RecvControl((void*)&_usbLineInfo,7);
|
||||
return true;
|
||||
}
|
||||
|
||||
if (CDC_SET_CONTROL_LINE_STATE == r)
|
||||
{
|
||||
_usbLineInfo.lineState = setup.wValueL;
|
||||
|
||||
// auto-reset into the bootloader is triggered when the port, already
|
||||
// open at 1200 bps, is closed. this is the signal to start the watchdog
|
||||
// with a relatively long period so it can finish housekeeping tasks
|
||||
// like servicing endpoints before the sketch ends
|
||||
if (1200 == _usbLineInfo.dwDTERate) {
|
||||
// We check DTR state to determine if host port is open (bit 0 of lineState).
|
||||
if ((_usbLineInfo.lineState & 0x01) == 0) {
|
||||
*(uint16_t *)0x0800 = 0x7777;
|
||||
wdt_enable(WDTO_120MS);
|
||||
} else {
|
||||
// Most OSs do some intermediate steps when configuring ports and DTR can
|
||||
// twiggle more than once before stabilizing.
|
||||
// To avoid spurious resets we set the watchdog to 250ms and eventually
|
||||
// cancel if DTR goes back high.
|
||||
|
||||
wdt_disable();
|
||||
wdt_reset();
|
||||
*(uint16_t *)0x0800 = 0x0;
|
||||
}
|
||||
}
|
||||
return true;
|
||||
}
|
||||
}
|
||||
return false;
|
||||
}
|
||||
|
||||
|
||||
int _serialPeek = -1;
|
||||
void Serial_::begin(uint16_t baud_count)
|
||||
{
|
||||
}
|
||||
|
||||
void Serial_::end(void)
|
||||
{
|
||||
}
|
||||
|
||||
void Serial_::accept(void)
|
||||
{
|
||||
ring_buffer *buffer = &cdc_rx_buffer;
|
||||
int i = (unsigned int)(buffer->head+1) % SERIAL_BUFFER_SIZE;
|
||||
|
||||
// if we should be storing the received character into the location
|
||||
// just before the tail (meaning that the head would advance to the
|
||||
// current location of the tail), we're about to overflow the buffer
|
||||
// and so we don't write the character or advance the head.
|
||||
|
||||
// while we have room to store a byte
|
||||
while (i != buffer->tail) {
|
||||
int c = USB_Recv(CDC_RX);
|
||||
if (c == -1)
|
||||
break; // no more data
|
||||
buffer->buffer[buffer->head] = c;
|
||||
buffer->head = i;
|
||||
|
||||
i = (unsigned int)(buffer->head+1) % SERIAL_BUFFER_SIZE;
|
||||
}
|
||||
}
|
||||
|
||||
int Serial_::available(void)
|
||||
{
|
||||
ring_buffer *buffer = &cdc_rx_buffer;
|
||||
return (unsigned int)(SERIAL_BUFFER_SIZE + buffer->head - buffer->tail) % SERIAL_BUFFER_SIZE;
|
||||
}
|
||||
|
||||
int Serial_::peek(void)
|
||||
{
|
||||
ring_buffer *buffer = &cdc_rx_buffer;
|
||||
if (buffer->head == buffer->tail) {
|
||||
return -1;
|
||||
} else {
|
||||
return buffer->buffer[buffer->tail];
|
||||
}
|
||||
}
|
||||
|
||||
int Serial_::read(void)
|
||||
{
|
||||
ring_buffer *buffer = &cdc_rx_buffer;
|
||||
// if the head isn't ahead of the tail, we don't have any characters
|
||||
if (buffer->head == buffer->tail) {
|
||||
return -1;
|
||||
} else {
|
||||
unsigned char c = buffer->buffer[buffer->tail];
|
||||
buffer->tail = (unsigned int)(buffer->tail + 1) % SERIAL_BUFFER_SIZE;
|
||||
return c;
|
||||
}
|
||||
}
|
||||
|
||||
void Serial_::flush(void)
|
||||
{
|
||||
USB_Flush(CDC_TX);
|
||||
}
|
||||
|
||||
size_t Serial_::write(uint8_t c)
|
||||
{
|
||||
/* only try to send bytes if the high-level CDC connection itself
|
||||
is open (not just the pipe) - the OS should set lineState when the port
|
||||
is opened and clear lineState when the port is closed.
|
||||
bytes sent before the user opens the connection or after
|
||||
the connection is closed are lost - just like with a UART. */
|
||||
|
||||
// TODO - ZE - check behavior on different OSes and test what happens if an
|
||||
// open connection isn't broken cleanly (cable is yanked out, host dies
|
||||
// or locks up, or host virtual serial port hangs)
|
||||
if (_usbLineInfo.lineState > 0) {
|
||||
int r = USB_Send(CDC_TX,&c,1);
|
||||
if (r > 0) {
|
||||
return r;
|
||||
} else {
|
||||
setWriteError();
|
||||
return 0;
|
||||
}
|
||||
}
|
||||
setWriteError();
|
||||
return 0;
|
||||
}
|
||||
|
||||
// This operator is a convenient way for a sketch to check whether the
|
||||
// port has actually been configured and opened by the host (as opposed
|
||||
// to just being connected to the host). It can be used, for example, in
|
||||
// setup() before printing to ensure that an application on the host is
|
||||
// actually ready to receive and display the data.
|
||||
// We add a short delay before returning to fix a bug observed by Federico
|
||||
// where the port is configured (lineState != 0) but not quite opened.
|
||||
Serial_::operator bool() {
|
||||
bool result = false;
|
||||
if (_usbLineInfo.lineState > 0)
|
||||
result = true;
|
||||
delay(10);
|
||||
return result;
|
||||
}
|
||||
|
||||
Serial_ Serial;
|
||||
|
||||
#endif
|
||||
#endif /* if defined(USBCON) */
|
||||
@ -0,0 +1,26 @@
|
||||
#ifndef client_h
|
||||
#define client_h
|
||||
#include "Print.h"
|
||||
#include "Stream.h"
|
||||
#include "IPAddress.h"
|
||||
|
||||
class Client : public Stream {
|
||||
|
||||
public:
|
||||
virtual int connect(IPAddress ip, uint16_t port) =0;
|
||||
virtual int connect(const char *host, uint16_t port) =0;
|
||||
virtual size_t write(uint8_t) =0;
|
||||
virtual size_t write(const uint8_t *buf, size_t size) =0;
|
||||
virtual int available() = 0;
|
||||
virtual int read() = 0;
|
||||
virtual int read(uint8_t *buf, size_t size) = 0;
|
||||
virtual int peek() = 0;
|
||||
virtual void flush() = 0;
|
||||
virtual void stop() = 0;
|
||||
virtual uint8_t connected() = 0;
|
||||
virtual operator bool() = 0;
|
||||
protected:
|
||||
uint8_t* rawIPAddress(IPAddress& addr) { return addr.raw_address(); };
|
||||
};
|
||||
|
||||
#endif
|
||||
520
ArduinoAddons/Arduino_1.x.x/hardware/rambo/cores/arduino/HID.cpp
Normal file
520
ArduinoAddons/Arduino_1.x.x/hardware/rambo/cores/arduino/HID.cpp
Normal file
@ -0,0 +1,520 @@
|
||||
|
||||
|
||||
/* Copyright (c) 2011, Peter Barrett
|
||||
**
|
||||
** Permission to use, copy, modify, and/or distribute this software for
|
||||
** any purpose with or without fee is hereby granted, provided that the
|
||||
** above copyright notice and this permission notice appear in all copies.
|
||||
**
|
||||
** THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL
|
||||
** WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED
|
||||
** WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR
|
||||
** BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES
|
||||
** OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS,
|
||||
** WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION,
|
||||
** ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS
|
||||
** SOFTWARE.
|
||||
*/
|
||||
|
||||
#include "Platform.h"
|
||||
#include "USBAPI.h"
|
||||
#include "USBDesc.h"
|
||||
|
||||
#if defined(USBCON)
|
||||
#ifdef HID_ENABLED
|
||||
|
||||
//#define RAWHID_ENABLED
|
||||
|
||||
// Singletons for mouse and keyboard
|
||||
|
||||
Mouse_ Mouse;
|
||||
Keyboard_ Keyboard;
|
||||
|
||||
//================================================================================
|
||||
//================================================================================
|
||||
|
||||
// HID report descriptor
|
||||
|
||||
#define LSB(_x) ((_x) & 0xFF)
|
||||
#define MSB(_x) ((_x) >> 8)
|
||||
|
||||
#define RAWHID_USAGE_PAGE 0xFFC0
|
||||
#define RAWHID_USAGE 0x0C00
|
||||
#define RAWHID_TX_SIZE 64
|
||||
#define RAWHID_RX_SIZE 64
|
||||
|
||||
extern const u8 _hidReportDescriptor[] PROGMEM;
|
||||
const u8 _hidReportDescriptor[] = {
|
||||
|
||||
// Mouse
|
||||
0x05, 0x01, // USAGE_PAGE (Generic Desktop) // 54
|
||||
0x09, 0x02, // USAGE (Mouse)
|
||||
0xa1, 0x01, // COLLECTION (Application)
|
||||
0x09, 0x01, // USAGE (Pointer)
|
||||
0xa1, 0x00, // COLLECTION (Physical)
|
||||
0x85, 0x01, // REPORT_ID (1)
|
||||
0x05, 0x09, // USAGE_PAGE (Button)
|
||||
0x19, 0x01, // USAGE_MINIMUM (Button 1)
|
||||
0x29, 0x03, // USAGE_MAXIMUM (Button 3)
|
||||
0x15, 0x00, // LOGICAL_MINIMUM (0)
|
||||
0x25, 0x01, // LOGICAL_MAXIMUM (1)
|
||||
0x95, 0x03, // REPORT_COUNT (3)
|
||||
0x75, 0x01, // REPORT_SIZE (1)
|
||||
0x81, 0x02, // INPUT (Data,Var,Abs)
|
||||
0x95, 0x01, // REPORT_COUNT (1)
|
||||
0x75, 0x05, // REPORT_SIZE (5)
|
||||
0x81, 0x03, // INPUT (Cnst,Var,Abs)
|
||||
0x05, 0x01, // USAGE_PAGE (Generic Desktop)
|
||||
0x09, 0x30, // USAGE (X)
|
||||
0x09, 0x31, // USAGE (Y)
|
||||
0x09, 0x38, // USAGE (Wheel)
|
||||
0x15, 0x81, // LOGICAL_MINIMUM (-127)
|
||||
0x25, 0x7f, // LOGICAL_MAXIMUM (127)
|
||||
0x75, 0x08, // REPORT_SIZE (8)
|
||||
0x95, 0x03, // REPORT_COUNT (3)
|
||||
0x81, 0x06, // INPUT (Data,Var,Rel)
|
||||
0xc0, // END_COLLECTION
|
||||
0xc0, // END_COLLECTION
|
||||
|
||||
// Keyboard
|
||||
0x05, 0x01, // USAGE_PAGE (Generic Desktop) // 47
|
||||
0x09, 0x06, // USAGE (Keyboard)
|
||||
0xa1, 0x01, // COLLECTION (Application)
|
||||
0x85, 0x02, // REPORT_ID (2)
|
||||
0x05, 0x07, // USAGE_PAGE (Keyboard)
|
||||
|
||||
0x19, 0xe0, // USAGE_MINIMUM (Keyboard LeftControl)
|
||||
0x29, 0xe7, // USAGE_MAXIMUM (Keyboard Right GUI)
|
||||
0x15, 0x00, // LOGICAL_MINIMUM (0)
|
||||
0x25, 0x01, // LOGICAL_MAXIMUM (1)
|
||||
0x75, 0x01, // REPORT_SIZE (1)
|
||||
|
||||
0x95, 0x08, // REPORT_COUNT (8)
|
||||
0x81, 0x02, // INPUT (Data,Var,Abs)
|
||||
0x95, 0x01, // REPORT_COUNT (1)
|
||||
0x75, 0x08, // REPORT_SIZE (8)
|
||||
0x81, 0x03, // INPUT (Cnst,Var,Abs)
|
||||
|
||||
0x95, 0x06, // REPORT_COUNT (6)
|
||||
0x75, 0x08, // REPORT_SIZE (8)
|
||||
0x15, 0x00, // LOGICAL_MINIMUM (0)
|
||||
0x25, 0x65, // LOGICAL_MAXIMUM (101)
|
||||
0x05, 0x07, // USAGE_PAGE (Keyboard)
|
||||
|
||||
0x19, 0x00, // USAGE_MINIMUM (Reserved (no event indicated))
|
||||
0x29, 0x65, // USAGE_MAXIMUM (Keyboard Application)
|
||||
0x81, 0x00, // INPUT (Data,Ary,Abs)
|
||||
0xc0, // END_COLLECTION
|
||||
|
||||
#if RAWHID_ENABLED
|
||||
// RAW HID
|
||||
0x06, LSB(RAWHID_USAGE_PAGE), MSB(RAWHID_USAGE_PAGE), // 30
|
||||
0x0A, LSB(RAWHID_USAGE), MSB(RAWHID_USAGE),
|
||||
|
||||
0xA1, 0x01, // Collection 0x01
|
||||
0x85, 0x03, // REPORT_ID (3)
|
||||
0x75, 0x08, // report size = 8 bits
|
||||
0x15, 0x00, // logical minimum = 0
|
||||
0x26, 0xFF, 0x00, // logical maximum = 255
|
||||
|
||||
0x95, 64, // report count TX
|
||||
0x09, 0x01, // usage
|
||||
0x81, 0x02, // Input (array)
|
||||
|
||||
0x95, 64, // report count RX
|
||||
0x09, 0x02, // usage
|
||||
0x91, 0x02, // Output (array)
|
||||
0xC0 // end collection
|
||||
#endif
|
||||
};
|
||||
|
||||
extern const HIDDescriptor _hidInterface PROGMEM;
|
||||
const HIDDescriptor _hidInterface =
|
||||
{
|
||||
D_INTERFACE(HID_INTERFACE,1,3,0,0),
|
||||
D_HIDREPORT(sizeof(_hidReportDescriptor)),
|
||||
D_ENDPOINT(USB_ENDPOINT_IN (HID_ENDPOINT_INT),USB_ENDPOINT_TYPE_INTERRUPT,0x40,0x01)
|
||||
};
|
||||
|
||||
//================================================================================
|
||||
//================================================================================
|
||||
// Driver
|
||||
|
||||
u8 _hid_protocol = 1;
|
||||
u8 _hid_idle = 1;
|
||||
|
||||
#define WEAK __attribute__ ((weak))
|
||||
|
||||
int WEAK HID_GetInterface(u8* interfaceNum)
|
||||
{
|
||||
interfaceNum[0] += 1; // uses 1
|
||||
return USB_SendControl(TRANSFER_PGM,&_hidInterface,sizeof(_hidInterface));
|
||||
}
|
||||
|
||||
int WEAK HID_GetDescriptor(int i)
|
||||
{
|
||||
return USB_SendControl(TRANSFER_PGM,_hidReportDescriptor,sizeof(_hidReportDescriptor));
|
||||
}
|
||||
|
||||
void WEAK HID_SendReport(u8 id, const void* data, int len)
|
||||
{
|
||||
USB_Send(HID_TX, &id, 1);
|
||||
USB_Send(HID_TX | TRANSFER_RELEASE,data,len);
|
||||
}
|
||||
|
||||
bool WEAK HID_Setup(Setup& setup)
|
||||
{
|
||||
u8 r = setup.bRequest;
|
||||
u8 requestType = setup.bmRequestType;
|
||||
if (REQUEST_DEVICETOHOST_CLASS_INTERFACE == requestType)
|
||||
{
|
||||
if (HID_GET_REPORT == r)
|
||||
{
|
||||
//HID_GetReport();
|
||||
return true;
|
||||
}
|
||||
if (HID_GET_PROTOCOL == r)
|
||||
{
|
||||
//Send8(_hid_protocol); // TODO
|
||||
return true;
|
||||
}
|
||||
}
|
||||
|
||||
if (REQUEST_HOSTTODEVICE_CLASS_INTERFACE == requestType)
|
||||
{
|
||||
if (HID_SET_PROTOCOL == r)
|
||||
{
|
||||
_hid_protocol = setup.wValueL;
|
||||
return true;
|
||||
}
|
||||
|
||||
if (HID_SET_IDLE == r)
|
||||
{
|
||||
_hid_idle = setup.wValueL;
|
||||
return true;
|
||||
}
|
||||
}
|
||||
return false;
|
||||
}
|
||||
|
||||
//================================================================================
|
||||
//================================================================================
|
||||
// Mouse
|
||||
|
||||
Mouse_::Mouse_(void) : _buttons(0)
|
||||
{
|
||||
}
|
||||
|
||||
void Mouse_::begin(void)
|
||||
{
|
||||
}
|
||||
|
||||
void Mouse_::end(void)
|
||||
{
|
||||
}
|
||||
|
||||
void Mouse_::click(uint8_t b)
|
||||
{
|
||||
_buttons = b;
|
||||
move(0,0,0);
|
||||
_buttons = 0;
|
||||
move(0,0,0);
|
||||
}
|
||||
|
||||
void Mouse_::move(signed char x, signed char y, signed char wheel)
|
||||
{
|
||||
u8 m[4];
|
||||
m[0] = _buttons;
|
||||
m[1] = x;
|
||||
m[2] = y;
|
||||
m[3] = wheel;
|
||||
HID_SendReport(1,m,4);
|
||||
}
|
||||
|
||||
void Mouse_::buttons(uint8_t b)
|
||||
{
|
||||
if (b != _buttons)
|
||||
{
|
||||
_buttons = b;
|
||||
move(0,0,0);
|
||||
}
|
||||
}
|
||||
|
||||
void Mouse_::press(uint8_t b)
|
||||
{
|
||||
buttons(_buttons | b);
|
||||
}
|
||||
|
||||
void Mouse_::release(uint8_t b)
|
||||
{
|
||||
buttons(_buttons & ~b);
|
||||
}
|
||||
|
||||
bool Mouse_::isPressed(uint8_t b)
|
||||
{
|
||||
if ((b & _buttons) > 0)
|
||||
return true;
|
||||
return false;
|
||||
}
|
||||
|
||||
//================================================================================
|
||||
//================================================================================
|
||||
// Keyboard
|
||||
|
||||
Keyboard_::Keyboard_(void)
|
||||
{
|
||||
}
|
||||
|
||||
void Keyboard_::begin(void)
|
||||
{
|
||||
}
|
||||
|
||||
void Keyboard_::end(void)
|
||||
{
|
||||
}
|
||||
|
||||
void Keyboard_::sendReport(KeyReport* keys)
|
||||
{
|
||||
HID_SendReport(2,keys,sizeof(KeyReport));
|
||||
}
|
||||
|
||||
extern
|
||||
const uint8_t _asciimap[128] PROGMEM;
|
||||
|
||||
#define SHIFT 0x80
|
||||
const uint8_t _asciimap[128] =
|
||||
{
|
||||
0x00, // NUL
|
||||
0x00, // SOH
|
||||
0x00, // STX
|
||||
0x00, // ETX
|
||||
0x00, // EOT
|
||||
0x00, // ENQ
|
||||
0x00, // ACK
|
||||
0x00, // BEL
|
||||
0x2a, // BS Backspace
|
||||
0x2b, // TAB Tab
|
||||
0x28, // LF Enter
|
||||
0x00, // VT
|
||||
0x00, // FF
|
||||
0x00, // CR
|
||||
0x00, // SO
|
||||
0x00, // SI
|
||||
0x00, // DEL
|
||||
0x00, // DC1
|
||||
0x00, // DC2
|
||||
0x00, // DC3
|
||||
0x00, // DC4
|
||||
0x00, // NAK
|
||||
0x00, // SYN
|
||||
0x00, // ETB
|
||||
0x00, // CAN
|
||||
0x00, // EM
|
||||
0x00, // SUB
|
||||
0x00, // ESC
|
||||
0x00, // FS
|
||||
0x00, // GS
|
||||
0x00, // RS
|
||||
0x00, // US
|
||||
|
||||
0x2c, // ' '
|
||||
0x1e|SHIFT, // !
|
||||
0x34|SHIFT, // "
|
||||
0x20|SHIFT, // #
|
||||
0x21|SHIFT, // $
|
||||
0x22|SHIFT, // %
|
||||
0x24|SHIFT, // &
|
||||
0x34, // '
|
||||
0x26|SHIFT, // (
|
||||
0x27|SHIFT, // )
|
||||
0x25|SHIFT, // *
|
||||
0x2e|SHIFT, // +
|
||||
0x36, // ,
|
||||
0x2d, // -
|
||||
0x37, // .
|
||||
0x38, // /
|
||||
0x27, // 0
|
||||
0x1e, // 1
|
||||
0x1f, // 2
|
||||
0x20, // 3
|
||||
0x21, // 4
|
||||
0x22, // 5
|
||||
0x23, // 6
|
||||
0x24, // 7
|
||||
0x25, // 8
|
||||
0x26, // 9
|
||||
0x33|SHIFT, // :
|
||||
0x33, // ;
|
||||
0x36|SHIFT, // <
|
||||
0x2e, // =
|
||||
0x37|SHIFT, // >
|
||||
0x38|SHIFT, // ?
|
||||
0x1f|SHIFT, // @
|
||||
0x04|SHIFT, // A
|
||||
0x05|SHIFT, // B
|
||||
0x06|SHIFT, // C
|
||||
0x07|SHIFT, // D
|
||||
0x08|SHIFT, // E
|
||||
0x09|SHIFT, // F
|
||||
0x0a|SHIFT, // G
|
||||
0x0b|SHIFT, // H
|
||||
0x0c|SHIFT, // I
|
||||
0x0d|SHIFT, // J
|
||||
0x0e|SHIFT, // K
|
||||
0x0f|SHIFT, // L
|
||||
0x10|SHIFT, // M
|
||||
0x11|SHIFT, // N
|
||||
0x12|SHIFT, // O
|
||||
0x13|SHIFT, // P
|
||||
0x14|SHIFT, // Q
|
||||
0x15|SHIFT, // R
|
||||
0x16|SHIFT, // S
|
||||
0x17|SHIFT, // T
|
||||
0x18|SHIFT, // U
|
||||
0x19|SHIFT, // V
|
||||
0x1a|SHIFT, // W
|
||||
0x1b|SHIFT, // X
|
||||
0x1c|SHIFT, // Y
|
||||
0x1d|SHIFT, // Z
|
||||
0x2f, // [
|
||||
0x31, // bslash
|
||||
0x30, // ]
|
||||
0x23|SHIFT, // ^
|
||||
0x2d|SHIFT, // _
|
||||
0x35, // `
|
||||
0x04, // a
|
||||
0x05, // b
|
||||
0x06, // c
|
||||
0x07, // d
|
||||
0x08, // e
|
||||
0x09, // f
|
||||
0x0a, // g
|
||||
0x0b, // h
|
||||
0x0c, // i
|
||||
0x0d, // j
|
||||
0x0e, // k
|
||||
0x0f, // l
|
||||
0x10, // m
|
||||
0x11, // n
|
||||
0x12, // o
|
||||
0x13, // p
|
||||
0x14, // q
|
||||
0x15, // r
|
||||
0x16, // s
|
||||
0x17, // t
|
||||
0x18, // u
|
||||
0x19, // v
|
||||
0x1a, // w
|
||||
0x1b, // x
|
||||
0x1c, // y
|
||||
0x1d, // z
|
||||
0x2f|SHIFT, //
|
||||
0x31|SHIFT, // |
|
||||
0x30|SHIFT, // }
|
||||
0x35|SHIFT, // ~
|
||||
0 // DEL
|
||||
};
|
||||
|
||||
uint8_t USBPutChar(uint8_t c);
|
||||
|
||||
// press() adds the specified key (printing, non-printing, or modifier)
|
||||
// to the persistent key report and sends the report. Because of the way
|
||||
// USB HID works, the host acts like the key remains pressed until we
|
||||
// call release(), releaseAll(), or otherwise clear the report and resend.
|
||||
size_t Keyboard_::press(uint8_t k)
|
||||
{
|
||||
uint8_t i;
|
||||
if (k >= 136) { // it's a non-printing key (not a modifier)
|
||||
k = k - 136;
|
||||
} else if (k >= 128) { // it's a modifier key
|
||||
_keyReport.modifiers |= (1<<(k-128));
|
||||
k = 0;
|
||||
} else { // it's a printing key
|
||||
k = pgm_read_byte(_asciimap + k);
|
||||
if (!k) {
|
||||
setWriteError();
|
||||
return 0;
|
||||
}
|
||||
if (k & 0x80) { // it's a capital letter or other character reached with shift
|
||||
_keyReport.modifiers |= 0x02; // the left shift modifier
|
||||
k &= 0x7F;
|
||||
}
|
||||
}
|
||||
|
||||
// Add k to the key report only if it's not already present
|
||||
// and if there is an empty slot.
|
||||
if (_keyReport.keys[0] != k && _keyReport.keys[1] != k &&
|
||||
_keyReport.keys[2] != k && _keyReport.keys[3] != k &&
|
||||
_keyReport.keys[4] != k && _keyReport.keys[5] != k) {
|
||||
|
||||
for (i=0; i<6; i++) {
|
||||
if (_keyReport.keys[i] == 0x00) {
|
||||
_keyReport.keys[i] = k;
|
||||
break;
|
||||
}
|
||||
}
|
||||
if (i == 6) {
|
||||
setWriteError();
|
||||
return 0;
|
||||
}
|
||||
}
|
||||
sendReport(&_keyReport);
|
||||
return 1;
|
||||
}
|
||||
|
||||
// release() takes the specified key out of the persistent key report and
|
||||
// sends the report. This tells the OS the key is no longer pressed and that
|
||||
// it shouldn't be repeated any more.
|
||||
size_t Keyboard_::release(uint8_t k)
|
||||
{
|
||||
uint8_t i;
|
||||
if (k >= 136) { // it's a non-printing key (not a modifier)
|
||||
k = k - 136;
|
||||
} else if (k >= 128) { // it's a modifier key
|
||||
_keyReport.modifiers &= ~(1<<(k-128));
|
||||
k = 0;
|
||||
} else { // it's a printing key
|
||||
k = pgm_read_byte(_asciimap + k);
|
||||
if (!k) {
|
||||
return 0;
|
||||
}
|
||||
if (k & 0x80) { // it's a capital letter or other character reached with shift
|
||||
_keyReport.modifiers &= ~(0x02); // the left shift modifier
|
||||
k &= 0x7F;
|
||||
}
|
||||
}
|
||||
|
||||
// Test the key report to see if k is present. Clear it if it exists.
|
||||
// Check all positions in case the key is present more than once (which it shouldn't be)
|
||||
for (i=0; i<6; i++) {
|
||||
if (0 != k && _keyReport.keys[i] == k) {
|
||||
_keyReport.keys[i] = 0x00;
|
||||
}
|
||||
}
|
||||
|
||||
sendReport(&_keyReport);
|
||||
return 1;
|
||||
}
|
||||
|
||||
void Keyboard_::releaseAll(void)
|
||||
{
|
||||
_keyReport.keys[0] = 0;
|
||||
_keyReport.keys[1] = 0;
|
||||
_keyReport.keys[2] = 0;
|
||||
_keyReport.keys[3] = 0;
|
||||
_keyReport.keys[4] = 0;
|
||||
_keyReport.keys[5] = 0;
|
||||
_keyReport.modifiers = 0;
|
||||
sendReport(&_keyReport);
|
||||
}
|
||||
|
||||
size_t Keyboard_::write(uint8_t c)
|
||||
{
|
||||
uint8_t p = press(c); // Keydown
|
||||
uint8_t r = release(c); // Keyup
|
||||
return (p); // just return the result of press() since release() almost always returns 1
|
||||
}
|
||||
|
||||
#endif
|
||||
|
||||
#endif /* if defined(USBCON) */
|
||||
@ -0,0 +1,519 @@
|
||||
/*
|
||||
HardwareSerial.cpp - Hardware serial library for Wiring
|
||||
Copyright (c) 2006 Nicholas Zambetti. All right reserved.
|
||||
|
||||
This library is free software; you can redistribute it and/or
|
||||
modify it under the terms of the GNU Lesser General Public
|
||||
License as published by the Free Software Foundation; either
|
||||
version 2.1 of the License, or (at your option) any later version.
|
||||
|
||||
This library is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
||||
Lesser General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU Lesser General Public
|
||||
License along with this library; if not, write to the Free Software
|
||||
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||
|
||||
Modified 23 November 2006 by David A. Mellis
|
||||
Modified 28 September 2010 by Mark Sproul
|
||||
Modified 14 August 2012 by Alarus
|
||||
*/
|
||||
|
||||
#include <stdlib.h>
|
||||
#include <stdio.h>
|
||||
#include <string.h>
|
||||
#include <inttypes.h>
|
||||
#include "Arduino.h"
|
||||
#include "wiring_private.h"
|
||||
|
||||
// this next line disables the entire HardwareSerial.cpp,
|
||||
// this is so I can support Attiny series and any other chip without a uart
|
||||
#if defined(UBRRH) || defined(UBRR0H) || defined(UBRR1H) || defined(UBRR2H) || defined(UBRR3H)
|
||||
|
||||
#include "HardwareSerial.h"
|
||||
|
||||
/*
|
||||
* on ATmega8, the uart and its bits are not numbered, so there is no "TXC0"
|
||||
* definition.
|
||||
*/
|
||||
#if !defined(TXC0)
|
||||
#if defined(TXC)
|
||||
#define TXC0 TXC
|
||||
#elif defined(TXC1)
|
||||
// Some devices have uart1 but no uart0
|
||||
#define TXC0 TXC1
|
||||
#else
|
||||
#error TXC0 not definable in HardwareSerial.h
|
||||
#endif
|
||||
#endif
|
||||
|
||||
// Define constants and variables for buffering incoming serial data. We're
|
||||
// using a ring buffer (I think), in which head is the index of the location
|
||||
// to which to write the next incoming character and tail is the index of the
|
||||
// location from which to read.
|
||||
#if (RAMEND < 1000)
|
||||
#define SERIAL_BUFFER_SIZE 16
|
||||
#else
|
||||
#define SERIAL_BUFFER_SIZE 64
|
||||
#endif
|
||||
|
||||
struct ring_buffer
|
||||
{
|
||||
unsigned char buffer[SERIAL_BUFFER_SIZE];
|
||||
volatile unsigned int head;
|
||||
volatile unsigned int tail;
|
||||
};
|
||||
|
||||
#if defined(USBCON)
|
||||
ring_buffer rx_buffer = { { 0 }, 0, 0};
|
||||
ring_buffer tx_buffer = { { 0 }, 0, 0};
|
||||
#endif
|
||||
#if defined(UBRRH) || defined(UBRR0H)
|
||||
ring_buffer rx_buffer = { { 0 }, 0, 0 };
|
||||
ring_buffer tx_buffer = { { 0 }, 0, 0 };
|
||||
#endif
|
||||
#if defined(UBRR1H)
|
||||
ring_buffer rx_buffer1 = { { 0 }, 0, 0 };
|
||||
ring_buffer tx_buffer1 = { { 0 }, 0, 0 };
|
||||
#endif
|
||||
#if defined(UBRR2H)
|
||||
ring_buffer rx_buffer2 = { { 0 }, 0, 0 };
|
||||
ring_buffer tx_buffer2 = { { 0 }, 0, 0 };
|
||||
#endif
|
||||
#if defined(UBRR3H)
|
||||
ring_buffer rx_buffer3 = { { 0 }, 0, 0 };
|
||||
ring_buffer tx_buffer3 = { { 0 }, 0, 0 };
|
||||
#endif
|
||||
|
||||
inline void store_char(unsigned char c, ring_buffer *buffer)
|
||||
{
|
||||
int i = (unsigned int)(buffer->head + 1) % SERIAL_BUFFER_SIZE;
|
||||
|
||||
// if we should be storing the received character into the location
|
||||
// just before the tail (meaning that the head would advance to the
|
||||
// current location of the tail), we're about to overflow the buffer
|
||||
// and so we don't write the character or advance the head.
|
||||
if (i != buffer->tail) {
|
||||
buffer->buffer[buffer->head] = c;
|
||||
buffer->head = i;
|
||||
}
|
||||
}
|
||||
|
||||
#if !defined(USART0_RX_vect) && defined(USART1_RX_vect)
|
||||
// do nothing - on the 32u4 the first USART is USART1
|
||||
#else
|
||||
#if !defined(USART_RX_vect) && !defined(SIG_USART0_RECV) && \
|
||||
!defined(SIG_UART0_RECV) && !defined(USART0_RX_vect) && \
|
||||
!defined(SIG_UART_RECV)
|
||||
#error "Don't know what the Data Received vector is called for the first UART"
|
||||
#else
|
||||
void serialEvent() __attribute__((weak));
|
||||
void serialEvent() {}
|
||||
#define serialEvent_implemented
|
||||
#if defined(USART_RX_vect)
|
||||
SIGNAL(USART_RX_vect)
|
||||
#elif defined(SIG_USART0_RECV)
|
||||
SIGNAL(SIG_USART0_RECV)
|
||||
#elif defined(SIG_UART0_RECV)
|
||||
SIGNAL(SIG_UART0_RECV)
|
||||
#elif defined(USART0_RX_vect)
|
||||
SIGNAL(USART0_RX_vect)
|
||||
#elif defined(SIG_UART_RECV)
|
||||
SIGNAL(SIG_UART_RECV)
|
||||
#endif
|
||||
{
|
||||
#if defined(UDR0)
|
||||
if (bit_is_clear(UCSR0A, UPE0)) {
|
||||
unsigned char c = UDR0;
|
||||
store_char(c, &rx_buffer);
|
||||
} else {
|
||||
unsigned char c = UDR0;
|
||||
};
|
||||
#elif defined(UDR)
|
||||
if (bit_is_clear(UCSRA, PE)) {
|
||||
unsigned char c = UDR;
|
||||
store_char(c, &rx_buffer);
|
||||
} else {
|
||||
unsigned char c = UDR;
|
||||
};
|
||||
#else
|
||||
#error UDR not defined
|
||||
#endif
|
||||
}
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#if defined(USART1_RX_vect)
|
||||
void serialEvent1() __attribute__((weak));
|
||||
void serialEvent1() {}
|
||||
#define serialEvent1_implemented
|
||||
SIGNAL(USART1_RX_vect)
|
||||
{
|
||||
if (bit_is_clear(UCSR1A, UPE1)) {
|
||||
unsigned char c = UDR1;
|
||||
store_char(c, &rx_buffer1);
|
||||
} else {
|
||||
unsigned char c = UDR1;
|
||||
};
|
||||
}
|
||||
#elif defined(SIG_USART1_RECV)
|
||||
#error SIG_USART1_RECV
|
||||
#endif
|
||||
|
||||
#if defined(USART2_RX_vect) && defined(UDR2)
|
||||
void serialEvent2() __attribute__((weak));
|
||||
void serialEvent2() {}
|
||||
#define serialEvent2_implemented
|
||||
SIGNAL(USART2_RX_vect)
|
||||
{
|
||||
if (bit_is_clear(UCSR2A, UPE2)) {
|
||||
unsigned char c = UDR2;
|
||||
store_char(c, &rx_buffer2);
|
||||
} else {
|
||||
unsigned char c = UDR2;
|
||||
};
|
||||
}
|
||||
#elif defined(SIG_USART2_RECV)
|
||||
#error SIG_USART2_RECV
|
||||
#endif
|
||||
|
||||
#if defined(USART3_RX_vect) && defined(UDR3)
|
||||
void serialEvent3() __attribute__((weak));
|
||||
void serialEvent3() {}
|
||||
#define serialEvent3_implemented
|
||||
SIGNAL(USART3_RX_vect)
|
||||
{
|
||||
if (bit_is_clear(UCSR3A, UPE3)) {
|
||||
unsigned char c = UDR3;
|
||||
store_char(c, &rx_buffer3);
|
||||
} else {
|
||||
unsigned char c = UDR3;
|
||||
};
|
||||
}
|
||||
#elif defined(SIG_USART3_RECV)
|
||||
#error SIG_USART3_RECV
|
||||
#endif
|
||||
|
||||
void serialEventRun(void)
|
||||
{
|
||||
#ifdef serialEvent_implemented
|
||||
if (Serial.available()) serialEvent();
|
||||
#endif
|
||||
#ifdef serialEvent1_implemented
|
||||
if (Serial1.available()) serialEvent1();
|
||||
#endif
|
||||
#ifdef serialEvent2_implemented
|
||||
if (Serial2.available()) serialEvent2();
|
||||
#endif
|
||||
#ifdef serialEvent3_implemented
|
||||
if (Serial3.available()) serialEvent3();
|
||||
#endif
|
||||
}
|
||||
|
||||
|
||||
#if !defined(USART0_UDRE_vect) && defined(USART1_UDRE_vect)
|
||||
// do nothing - on the 32u4 the first USART is USART1
|
||||
#else
|
||||
#if !defined(UART0_UDRE_vect) && !defined(UART_UDRE_vect) && !defined(USART0_UDRE_vect) && !defined(USART_UDRE_vect)
|
||||
#error "Don't know what the Data Register Empty vector is called for the first UART"
|
||||
#else
|
||||
#if defined(UART0_UDRE_vect)
|
||||
ISR(UART0_UDRE_vect)
|
||||
#elif defined(UART_UDRE_vect)
|
||||
ISR(UART_UDRE_vect)
|
||||
#elif defined(USART0_UDRE_vect)
|
||||
ISR(USART0_UDRE_vect)
|
||||
#elif defined(USART_UDRE_vect)
|
||||
ISR(USART_UDRE_vect)
|
||||
#endif
|
||||
{
|
||||
if (tx_buffer.head == tx_buffer.tail) {
|
||||
// Buffer empty, so disable interrupts
|
||||
#if defined(UCSR0B)
|
||||
cbi(UCSR0B, UDRIE0);
|
||||
#else
|
||||
cbi(UCSRB, UDRIE);
|
||||
#endif
|
||||
}
|
||||
else {
|
||||
// There is more data in the output buffer. Send the next byte
|
||||
unsigned char c = tx_buffer.buffer[tx_buffer.tail];
|
||||
tx_buffer.tail = (tx_buffer.tail + 1) % SERIAL_BUFFER_SIZE;
|
||||
|
||||
#if defined(UDR0)
|
||||
UDR0 = c;
|
||||
#elif defined(UDR)
|
||||
UDR = c;
|
||||
#else
|
||||
#error UDR not defined
|
||||
#endif
|
||||
}
|
||||
}
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#ifdef USART1_UDRE_vect
|
||||
ISR(USART1_UDRE_vect)
|
||||
{
|
||||
if (tx_buffer1.head == tx_buffer1.tail) {
|
||||
// Buffer empty, so disable interrupts
|
||||
cbi(UCSR1B, UDRIE1);
|
||||
}
|
||||
else {
|
||||
// There is more data in the output buffer. Send the next byte
|
||||
unsigned char c = tx_buffer1.buffer[tx_buffer1.tail];
|
||||
tx_buffer1.tail = (tx_buffer1.tail + 1) % SERIAL_BUFFER_SIZE;
|
||||
|
||||
UDR1 = c;
|
||||
}
|
||||
}
|
||||
#endif
|
||||
|
||||
#ifdef USART2_UDRE_vect
|
||||
ISR(USART2_UDRE_vect)
|
||||
{
|
||||
if (tx_buffer2.head == tx_buffer2.tail) {
|
||||
// Buffer empty, so disable interrupts
|
||||
cbi(UCSR2B, UDRIE2);
|
||||
}
|
||||
else {
|
||||
// There is more data in the output buffer. Send the next byte
|
||||
unsigned char c = tx_buffer2.buffer[tx_buffer2.tail];
|
||||
tx_buffer2.tail = (tx_buffer2.tail + 1) % SERIAL_BUFFER_SIZE;
|
||||
|
||||
UDR2 = c;
|
||||
}
|
||||
}
|
||||
#endif
|
||||
|
||||
#ifdef USART3_UDRE_vect
|
||||
ISR(USART3_UDRE_vect)
|
||||
{
|
||||
if (tx_buffer3.head == tx_buffer3.tail) {
|
||||
// Buffer empty, so disable interrupts
|
||||
cbi(UCSR3B, UDRIE3);
|
||||
}
|
||||
else {
|
||||
// There is more data in the output buffer. Send the next byte
|
||||
unsigned char c = tx_buffer3.buffer[tx_buffer3.tail];
|
||||
tx_buffer3.tail = (tx_buffer3.tail + 1) % SERIAL_BUFFER_SIZE;
|
||||
|
||||
UDR3 = c;
|
||||
}
|
||||
}
|
||||
#endif
|
||||
|
||||
|
||||
// Constructors ////////////////////////////////////////////////////////////////
|
||||
|
||||
HardwareSerial::HardwareSerial(ring_buffer *rx_buffer, ring_buffer *tx_buffer,
|
||||
volatile uint8_t *ubrrh, volatile uint8_t *ubrrl,
|
||||
volatile uint8_t *ucsra, volatile uint8_t *ucsrb,
|
||||
volatile uint8_t *ucsrc, volatile uint8_t *udr,
|
||||
uint8_t rxen, uint8_t txen, uint8_t rxcie, uint8_t udrie, uint8_t u2x)
|
||||
{
|
||||
_rx_buffer = rx_buffer;
|
||||
_tx_buffer = tx_buffer;
|
||||
_ubrrh = ubrrh;
|
||||
_ubrrl = ubrrl;
|
||||
_ucsra = ucsra;
|
||||
_ucsrb = ucsrb;
|
||||
_ucsrc = ucsrc;
|
||||
_udr = udr;
|
||||
_rxen = rxen;
|
||||
_txen = txen;
|
||||
_rxcie = rxcie;
|
||||
_udrie = udrie;
|
||||
_u2x = u2x;
|
||||
}
|
||||
|
||||
// Public Methods //////////////////////////////////////////////////////////////
|
||||
|
||||
void HardwareSerial::begin(unsigned long baud)
|
||||
{
|
||||
uint16_t baud_setting;
|
||||
bool use_u2x = true;
|
||||
|
||||
#if F_CPU == 16000000UL
|
||||
// hardcoded exception for compatibility with the bootloader shipped
|
||||
// with the Duemilanove and previous boards and the firmware on the 8U2
|
||||
// on the Uno and Mega 2560.
|
||||
if (baud == 57600) {
|
||||
use_u2x = false;
|
||||
}
|
||||
#endif
|
||||
|
||||
try_again:
|
||||
|
||||
if (use_u2x) {
|
||||
*_ucsra = 1 << _u2x;
|
||||
baud_setting = (F_CPU / 4 / baud - 1) / 2;
|
||||
} else {
|
||||
*_ucsra = 0;
|
||||
baud_setting = (F_CPU / 8 / baud - 1) / 2;
|
||||
}
|
||||
|
||||
if ((baud_setting > 4095) && use_u2x)
|
||||
{
|
||||
use_u2x = false;
|
||||
goto try_again;
|
||||
}
|
||||
|
||||
// assign the baud_setting, a.k.a. ubbr (USART Baud Rate Register)
|
||||
*_ubrrh = baud_setting >> 8;
|
||||
*_ubrrl = baud_setting;
|
||||
|
||||
transmitting = false;
|
||||
|
||||
sbi(*_ucsrb, _rxen);
|
||||
sbi(*_ucsrb, _txen);
|
||||
sbi(*_ucsrb, _rxcie);
|
||||
cbi(*_ucsrb, _udrie);
|
||||
}
|
||||
|
||||
void HardwareSerial::begin(unsigned long baud, byte config)
|
||||
{
|
||||
uint16_t baud_setting;
|
||||
uint8_t current_config;
|
||||
bool use_u2x = true;
|
||||
|
||||
#if F_CPU == 16000000UL
|
||||
// hardcoded exception for compatibility with the bootloader shipped
|
||||
// with the Duemilanove and previous boards and the firmware on the 8U2
|
||||
// on the Uno and Mega 2560.
|
||||
if (baud == 57600) {
|
||||
use_u2x = false;
|
||||
}
|
||||
#endif
|
||||
|
||||
try_again:
|
||||
|
||||
if (use_u2x) {
|
||||
*_ucsra = 1 << _u2x;
|
||||
baud_setting = (F_CPU / 4 / baud - 1) / 2;
|
||||
} else {
|
||||
*_ucsra = 0;
|
||||
baud_setting = (F_CPU / 8 / baud - 1) / 2;
|
||||
}
|
||||
|
||||
if ((baud_setting > 4095) && use_u2x)
|
||||
{
|
||||
use_u2x = false;
|
||||
goto try_again;
|
||||
}
|
||||
|
||||
// assign the baud_setting, a.k.a. ubbr (USART Baud Rate Register)
|
||||
*_ubrrh = baud_setting >> 8;
|
||||
*_ubrrl = baud_setting;
|
||||
|
||||
//set the data bits, parity, and stop bits
|
||||
#if defined(__AVR_ATmega8__)
|
||||
config |= 0x80; // select UCSRC register (shared with UBRRH)
|
||||
#endif
|
||||
*_ucsrc = config;
|
||||
|
||||
sbi(*_ucsrb, _rxen);
|
||||
sbi(*_ucsrb, _txen);
|
||||
sbi(*_ucsrb, _rxcie);
|
||||
cbi(*_ucsrb, _udrie);
|
||||
}
|
||||
|
||||
void HardwareSerial::end()
|
||||
{
|
||||
// wait for transmission of outgoing data
|
||||
while (_tx_buffer->head != _tx_buffer->tail)
|
||||
;
|
||||
|
||||
cbi(*_ucsrb, _rxen);
|
||||
cbi(*_ucsrb, _txen);
|
||||
cbi(*_ucsrb, _rxcie);
|
||||
cbi(*_ucsrb, _udrie);
|
||||
|
||||
// clear any received data
|
||||
_rx_buffer->head = _rx_buffer->tail;
|
||||
}
|
||||
|
||||
int HardwareSerial::available(void)
|
||||
{
|
||||
return (unsigned int)(SERIAL_BUFFER_SIZE + _rx_buffer->head - _rx_buffer->tail) % SERIAL_BUFFER_SIZE;
|
||||
}
|
||||
|
||||
int HardwareSerial::peek(void)
|
||||
{
|
||||
if (_rx_buffer->head == _rx_buffer->tail) {
|
||||
return -1;
|
||||
} else {
|
||||
return _rx_buffer->buffer[_rx_buffer->tail];
|
||||
}
|
||||
}
|
||||
|
||||
int HardwareSerial::read(void)
|
||||
{
|
||||
// if the head isn't ahead of the tail, we don't have any characters
|
||||
if (_rx_buffer->head == _rx_buffer->tail) {
|
||||
return -1;
|
||||
} else {
|
||||
unsigned char c = _rx_buffer->buffer[_rx_buffer->tail];
|
||||
_rx_buffer->tail = (unsigned int)(_rx_buffer->tail + 1) % SERIAL_BUFFER_SIZE;
|
||||
return c;
|
||||
}
|
||||
}
|
||||
|
||||
void HardwareSerial::flush()
|
||||
{
|
||||
// UDR is kept full while the buffer is not empty, so TXC triggers when EMPTY && SENT
|
||||
while (transmitting && ! (*_ucsra & _BV(TXC0)));
|
||||
transmitting = false;
|
||||
}
|
||||
|
||||
size_t HardwareSerial::write(uint8_t c)
|
||||
{
|
||||
int i = (_tx_buffer->head + 1) % SERIAL_BUFFER_SIZE;
|
||||
|
||||
// If the output buffer is full, there's nothing for it other than to
|
||||
// wait for the interrupt handler to empty it a bit
|
||||
// ???: return 0 here instead?
|
||||
while (i == _tx_buffer->tail)
|
||||
;
|
||||
|
||||
_tx_buffer->buffer[_tx_buffer->head] = c;
|
||||
_tx_buffer->head = i;
|
||||
|
||||
sbi(*_ucsrb, _udrie);
|
||||
// clear the TXC bit -- "can be cleared by writing a one to its bit location"
|
||||
transmitting = true;
|
||||
sbi(*_ucsra, TXC0);
|
||||
|
||||
return 1;
|
||||
}
|
||||
|
||||
HardwareSerial::operator bool() {
|
||||
return true;
|
||||
}
|
||||
|
||||
// Preinstantiate Objects //////////////////////////////////////////////////////
|
||||
|
||||
#if defined(UBRRH) && defined(UBRRL)
|
||||
HardwareSerial Serial(&rx_buffer, &tx_buffer, &UBRRH, &UBRRL, &UCSRA, &UCSRB, &UCSRC, &UDR, RXEN, TXEN, RXCIE, UDRIE, U2X);
|
||||
#elif defined(UBRR0H) && defined(UBRR0L)
|
||||
HardwareSerial Serial(&rx_buffer, &tx_buffer, &UBRR0H, &UBRR0L, &UCSR0A, &UCSR0B, &UCSR0C, &UDR0, RXEN0, TXEN0, RXCIE0, UDRIE0, U2X0);
|
||||
#elif defined(USBCON)
|
||||
// do nothing - Serial object and buffers are initialized in CDC code
|
||||
#else
|
||||
#error no serial port defined (port 0)
|
||||
#endif
|
||||
|
||||
#if defined(UBRR1H)
|
||||
HardwareSerial Serial1(&rx_buffer1, &tx_buffer1, &UBRR1H, &UBRR1L, &UCSR1A, &UCSR1B, &UCSR1C, &UDR1, RXEN1, TXEN1, RXCIE1, UDRIE1, U2X1);
|
||||
#endif
|
||||
#if defined(UBRR2H)
|
||||
HardwareSerial Serial2(&rx_buffer2, &tx_buffer2, &UBRR2H, &UBRR2L, &UCSR2A, &UCSR2B, &UCSR2C, &UDR2, RXEN2, TXEN2, RXCIE2, UDRIE2, U2X2);
|
||||
#endif
|
||||
#if defined(UBRR3H)
|
||||
HardwareSerial Serial3(&rx_buffer3, &tx_buffer3, &UBRR3H, &UBRR3L, &UCSR3A, &UCSR3B, &UCSR3C, &UDR3, RXEN3, TXEN3, RXCIE3, UDRIE3, U2X3);
|
||||
#endif
|
||||
|
||||
#endif // whole file
|
||||
|
||||
@ -0,0 +1,115 @@
|
||||
/*
|
||||
HardwareSerial.h - Hardware serial library for Wiring
|
||||
Copyright (c) 2006 Nicholas Zambetti. All right reserved.
|
||||
|
||||
This library is free software; you can redistribute it and/or
|
||||
modify it under the terms of the GNU Lesser General Public
|
||||
License as published by the Free Software Foundation; either
|
||||
version 2.1 of the License, or (at your option) any later version.
|
||||
|
||||
This library is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
||||
Lesser General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU Lesser General Public
|
||||
License along with this library; if not, write to the Free Software
|
||||
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||
|
||||
Modified 28 September 2010 by Mark Sproul
|
||||
Modified 14 August 2012 by Alarus
|
||||
*/
|
||||
|
||||
#ifndef HardwareSerial_h
|
||||
#define HardwareSerial_h
|
||||
|
||||
#include <inttypes.h>
|
||||
|
||||
#include "Stream.h"
|
||||
|
||||
struct ring_buffer;
|
||||
|
||||
class HardwareSerial : public Stream
|
||||
{
|
||||
private:
|
||||
ring_buffer *_rx_buffer;
|
||||
ring_buffer *_tx_buffer;
|
||||
volatile uint8_t *_ubrrh;
|
||||
volatile uint8_t *_ubrrl;
|
||||
volatile uint8_t *_ucsra;
|
||||
volatile uint8_t *_ucsrb;
|
||||
volatile uint8_t *_ucsrc;
|
||||
volatile uint8_t *_udr;
|
||||
uint8_t _rxen;
|
||||
uint8_t _txen;
|
||||
uint8_t _rxcie;
|
||||
uint8_t _udrie;
|
||||
uint8_t _u2x;
|
||||
bool transmitting;
|
||||
public:
|
||||
HardwareSerial(ring_buffer *rx_buffer, ring_buffer *tx_buffer,
|
||||
volatile uint8_t *ubrrh, volatile uint8_t *ubrrl,
|
||||
volatile uint8_t *ucsra, volatile uint8_t *ucsrb,
|
||||
volatile uint8_t *ucsrc, volatile uint8_t *udr,
|
||||
uint8_t rxen, uint8_t txen, uint8_t rxcie, uint8_t udrie, uint8_t u2x);
|
||||
void begin(unsigned long);
|
||||
void begin(unsigned long, uint8_t);
|
||||
void end();
|
||||
virtual int available(void);
|
||||
virtual int peek(void);
|
||||
virtual int read(void);
|
||||
virtual void flush(void);
|
||||
virtual size_t write(uint8_t);
|
||||
inline size_t write(unsigned long n) { return write((uint8_t)n); }
|
||||
inline size_t write(long n) { return write((uint8_t)n); }
|
||||
inline size_t write(unsigned int n) { return write((uint8_t)n); }
|
||||
inline size_t write(int n) { return write((uint8_t)n); }
|
||||
using Print::write; // pull in write(str) and write(buf, size) from Print
|
||||
operator bool();
|
||||
};
|
||||
|
||||
// Define config for Serial.begin(baud, config);
|
||||
#define SERIAL_5N1 0x00
|
||||
#define SERIAL_6N1 0x02
|
||||
#define SERIAL_7N1 0x04
|
||||
#define SERIAL_8N1 0x06
|
||||
#define SERIAL_5N2 0x08
|
||||
#define SERIAL_6N2 0x0A
|
||||
#define SERIAL_7N2 0x0C
|
||||
#define SERIAL_8N2 0x0E
|
||||
#define SERIAL_5E1 0x20
|
||||
#define SERIAL_6E1 0x22
|
||||
#define SERIAL_7E1 0x24
|
||||
#define SERIAL_8E1 0x26
|
||||
#define SERIAL_5E2 0x28
|
||||
#define SERIAL_6E2 0x2A
|
||||
#define SERIAL_7E2 0x2C
|
||||
#define SERIAL_8E2 0x2E
|
||||
#define SERIAL_5O1 0x30
|
||||
#define SERIAL_6O1 0x32
|
||||
#define SERIAL_7O1 0x34
|
||||
#define SERIAL_8O1 0x36
|
||||
#define SERIAL_5O2 0x38
|
||||
#define SERIAL_6O2 0x3A
|
||||
#define SERIAL_7O2 0x3C
|
||||
#define SERIAL_8O2 0x3E
|
||||
|
||||
#if defined(UBRRH) || defined(UBRR0H)
|
||||
extern HardwareSerial Serial;
|
||||
#elif defined(USBCON)
|
||||
#include "USBAPI.h"
|
||||
// extern HardwareSerial Serial_;
|
||||
#endif
|
||||
#if defined(UBRR1H)
|
||||
extern HardwareSerial Serial1;
|
||||
#endif
|
||||
#if defined(UBRR2H)
|
||||
extern HardwareSerial Serial2;
|
||||
#endif
|
||||
#if defined(UBRR3H)
|
||||
extern HardwareSerial Serial3;
|
||||
#endif
|
||||
|
||||
extern void serialEventRun(void) __attribute__((weak));
|
||||
|
||||
#endif
|
||||
@ -0,0 +1,56 @@
|
||||
|
||||
#include <Arduino.h>
|
||||
#include <IPAddress.h>
|
||||
|
||||
IPAddress::IPAddress()
|
||||
{
|
||||
memset(_address, 0, sizeof(_address));
|
||||
}
|
||||
|
||||
IPAddress::IPAddress(uint8_t first_octet, uint8_t second_octet, uint8_t third_octet, uint8_t fourth_octet)
|
||||
{
|
||||
_address[0] = first_octet;
|
||||
_address[1] = second_octet;
|
||||
_address[2] = third_octet;
|
||||
_address[3] = fourth_octet;
|
||||
}
|
||||
|
||||
IPAddress::IPAddress(uint32_t address)
|
||||
{
|
||||
memcpy(_address, &address, sizeof(_address));
|
||||
}
|
||||
|
||||
IPAddress::IPAddress(const uint8_t *address)
|
||||
{
|
||||
memcpy(_address, address, sizeof(_address));
|
||||
}
|
||||
|
||||
IPAddress& IPAddress::operator=(const uint8_t *address)
|
||||
{
|
||||
memcpy(_address, address, sizeof(_address));
|
||||
return *this;
|
||||
}
|
||||
|
||||
IPAddress& IPAddress::operator=(uint32_t address)
|
||||
{
|
||||
memcpy(_address, (const uint8_t *)&address, sizeof(_address));
|
||||
return *this;
|
||||
}
|
||||
|
||||
bool IPAddress::operator==(const uint8_t* addr)
|
||||
{
|
||||
return memcmp(addr, _address, sizeof(_address)) == 0;
|
||||
}
|
||||
|
||||
size_t IPAddress::printTo(Print& p) const
|
||||
{
|
||||
size_t n = 0;
|
||||
for (int i =0; i < 3; i++)
|
||||
{
|
||||
n += p.print(_address[i], DEC);
|
||||
n += p.print('.');
|
||||
}
|
||||
n += p.print(_address[3], DEC);
|
||||
return n;
|
||||
}
|
||||
|
||||
@ -0,0 +1,76 @@
|
||||
/*
|
||||
*
|
||||
* MIT License:
|
||||
* Copyright (c) 2011 Adrian McEwen
|
||||
* Permission is hereby granted, free of charge, to any person obtaining a copy
|
||||
* of this software and associated documentation files (the "Software"), to deal
|
||||
* in the Software without restriction, including without limitation the rights
|
||||
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
||||
* copies of the Software, and to permit persons to whom the Software is
|
||||
* furnished to do so, subject to the following conditions:
|
||||
*
|
||||
* The above copyright notice and this permission notice shall be included in
|
||||
* all copies or substantial portions of the Software.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
||||
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
||||
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
|
||||
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
||||
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
||||
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
|
||||
* THE SOFTWARE.
|
||||
*
|
||||
* adrianm@mcqn.com 1/1/2011
|
||||
*/
|
||||
|
||||
#ifndef IPAddress_h
|
||||
#define IPAddress_h
|
||||
|
||||
#include <Printable.h>
|
||||
|
||||
// A class to make it easier to handle and pass around IP addresses
|
||||
|
||||
class IPAddress : public Printable {
|
||||
private:
|
||||
uint8_t _address[4]; // IPv4 address
|
||||
// Access the raw byte array containing the address. Because this returns a pointer
|
||||
// to the internal structure rather than a copy of the address this function should only
|
||||
// be used when you know that the usage of the returned uint8_t* will be transient and not
|
||||
// stored.
|
||||
uint8_t* raw_address() { return _address; };
|
||||
|
||||
public:
|
||||
// Constructors
|
||||
IPAddress();
|
||||
IPAddress(uint8_t first_octet, uint8_t second_octet, uint8_t third_octet, uint8_t fourth_octet);
|
||||
IPAddress(uint32_t address);
|
||||
IPAddress(const uint8_t *address);
|
||||
|
||||
// Overloaded cast operator to allow IPAddress objects to be used where a pointer
|
||||
// to a four-byte uint8_t array is expected
|
||||
operator uint32_t() { return *((uint32_t*)_address); };
|
||||
bool operator==(const IPAddress& addr) { return (*((uint32_t*)_address)) == (*((uint32_t*)addr._address)); };
|
||||
bool operator==(const uint8_t* addr);
|
||||
|
||||
// Overloaded index operator to allow getting and setting individual octets of the address
|
||||
uint8_t operator[](int index) const { return _address[index]; };
|
||||
uint8_t& operator[](int index) { return _address[index]; };
|
||||
|
||||
// Overloaded copy operators to allow initialisation of IPAddress objects from other types
|
||||
IPAddress& operator=(const uint8_t *address);
|
||||
IPAddress& operator=(uint32_t address);
|
||||
|
||||
virtual size_t printTo(Print& p) const;
|
||||
|
||||
friend class EthernetClass;
|
||||
friend class UDP;
|
||||
friend class Client;
|
||||
friend class Server;
|
||||
friend class DhcpClass;
|
||||
friend class DNSClient;
|
||||
};
|
||||
|
||||
const IPAddress INADDR_NONE(0,0,0,0);
|
||||
|
||||
|
||||
#endif
|
||||
@ -0,0 +1,23 @@
|
||||
|
||||
#ifndef __PLATFORM_H__
|
||||
#define __PLATFORM_H__
|
||||
|
||||
#include <inttypes.h>
|
||||
#include <avr/pgmspace.h>
|
||||
#include <avr/eeprom.h>
|
||||
#include <avr/interrupt.h>
|
||||
#include <util/delay.h>
|
||||
|
||||
typedef unsigned char u8;
|
||||
typedef unsigned short u16;
|
||||
typedef unsigned long u32;
|
||||
|
||||
#include "Arduino.h"
|
||||
|
||||
#if defined(USBCON)
|
||||
#include "USBDesc.h"
|
||||
#include "USBCore.h"
|
||||
#include "USBAPI.h"
|
||||
#endif /* if defined(USBCON) */
|
||||
|
||||
#endif
|
||||
@ -0,0 +1,268 @@
|
||||
/*
|
||||
Print.cpp - Base class that provides print() and println()
|
||||
Copyright (c) 2008 David A. Mellis. All right reserved.
|
||||
|
||||
This library is free software; you can redistribute it and/or
|
||||
modify it under the terms of the GNU Lesser General Public
|
||||
License as published by the Free Software Foundation; either
|
||||
version 2.1 of the License, or (at your option) any later version.
|
||||
|
||||
This library is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
||||
Lesser General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU Lesser General Public
|
||||
License along with this library; if not, write to the Free Software
|
||||
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||
|
||||
Modified 23 November 2006 by David A. Mellis
|
||||
*/
|
||||
|
||||
#include <stdlib.h>
|
||||
#include <stdio.h>
|
||||
#include <string.h>
|
||||
#include <math.h>
|
||||
#include "Arduino.h"
|
||||
|
||||
#include "Print.h"
|
||||
|
||||
// Public Methods //////////////////////////////////////////////////////////////
|
||||
|
||||
/* default implementation: may be overridden */
|
||||
size_t Print::write(const uint8_t *buffer, size_t size)
|
||||
{
|
||||
size_t n = 0;
|
||||
while (size--) {
|
||||
n += write(*buffer++);
|
||||
}
|
||||
return n;
|
||||
}
|
||||
|
||||
size_t Print::print(const __FlashStringHelper *ifsh)
|
||||
{
|
||||
const char PROGMEM *p = (const char PROGMEM *)ifsh;
|
||||
size_t n = 0;
|
||||
while (1) {
|
||||
unsigned char c = pgm_read_byte(p++);
|
||||
if (c == 0) break;
|
||||
n += write(c);
|
||||
}
|
||||
return n;
|
||||
}
|
||||
|
||||
size_t Print::print(const String &s)
|
||||
{
|
||||
size_t n = 0;
|
||||
for (uint16_t i = 0; i < s.length(); i++) {
|
||||
n += write(s[i]);
|
||||
}
|
||||
return n;
|
||||
}
|
||||
|
||||
size_t Print::print(const char str[])
|
||||
{
|
||||
return write(str);
|
||||
}
|
||||
|
||||
size_t Print::print(char c)
|
||||
{
|
||||
return write(c);
|
||||
}
|
||||
|
||||
size_t Print::print(unsigned char b, int base)
|
||||
{
|
||||
return print((unsigned long) b, base);
|
||||
}
|
||||
|
||||
size_t Print::print(int n, int base)
|
||||
{
|
||||
return print((long) n, base);
|
||||
}
|
||||
|
||||
size_t Print::print(unsigned int n, int base)
|
||||
{
|
||||
return print((unsigned long) n, base);
|
||||
}
|
||||
|
||||
size_t Print::print(long n, int base)
|
||||
{
|
||||
if (base == 0) {
|
||||
return write(n);
|
||||
} else if (base == 10) {
|
||||
if (n < 0) {
|
||||
int t = print('-');
|
||||
n = -n;
|
||||
return printNumber(n, 10) + t;
|
||||
}
|
||||
return printNumber(n, 10);
|
||||
} else {
|
||||
return printNumber(n, base);
|
||||
}
|
||||
}
|
||||
|
||||
size_t Print::print(unsigned long n, int base)
|
||||
{
|
||||
if (base == 0) return write(n);
|
||||
else return printNumber(n, base);
|
||||
}
|
||||
|
||||
size_t Print::print(double n, int digits)
|
||||
{
|
||||
return printFloat(n, digits);
|
||||
}
|
||||
|
||||
size_t Print::println(const __FlashStringHelper *ifsh)
|
||||
{
|
||||
size_t n = print(ifsh);
|
||||
n += println();
|
||||
return n;
|
||||
}
|
||||
|
||||
size_t Print::print(const Printable& x)
|
||||
{
|
||||
return x.printTo(*this);
|
||||
}
|
||||
|
||||
size_t Print::println(void)
|
||||
{
|
||||
size_t n = print('\r');
|
||||
n += print('\n');
|
||||
return n;
|
||||
}
|
||||
|
||||
size_t Print::println(const String &s)
|
||||
{
|
||||
size_t n = print(s);
|
||||
n += println();
|
||||
return n;
|
||||
}
|
||||
|
||||
size_t Print::println(const char c[])
|
||||
{
|
||||
size_t n = print(c);
|
||||
n += println();
|
||||
return n;
|
||||
}
|
||||
|
||||
size_t Print::println(char c)
|
||||
{
|
||||
size_t n = print(c);
|
||||
n += println();
|
||||
return n;
|
||||
}
|
||||
|
||||
size_t Print::println(unsigned char b, int base)
|
||||
{
|
||||
size_t n = print(b, base);
|
||||
n += println();
|
||||
return n;
|
||||
}
|
||||
|
||||
size_t Print::println(int num, int base)
|
||||
{
|
||||
size_t n = print(num, base);
|
||||
n += println();
|
||||
return n;
|
||||
}
|
||||
|
||||
size_t Print::println(unsigned int num, int base)
|
||||
{
|
||||
size_t n = print(num, base);
|
||||
n += println();
|
||||
return n;
|
||||
}
|
||||
|
||||
size_t Print::println(long num, int base)
|
||||
{
|
||||
size_t n = print(num, base);
|
||||
n += println();
|
||||
return n;
|
||||
}
|
||||
|
||||
size_t Print::println(unsigned long num, int base)
|
||||
{
|
||||
size_t n = print(num, base);
|
||||
n += println();
|
||||
return n;
|
||||
}
|
||||
|
||||
size_t Print::println(double num, int digits)
|
||||
{
|
||||
size_t n = print(num, digits);
|
||||
n += println();
|
||||
return n;
|
||||
}
|
||||
|
||||
size_t Print::println(const Printable& x)
|
||||
{
|
||||
size_t n = print(x);
|
||||
n += println();
|
||||
return n;
|
||||
}
|
||||
|
||||
// Private Methods /////////////////////////////////////////////////////////////
|
||||
|
||||
size_t Print::printNumber(unsigned long n, uint8_t base) {
|
||||
char buf[8 * sizeof(long) + 1]; // Assumes 8-bit chars plus zero byte.
|
||||
char *str = &buf[sizeof(buf) - 1];
|
||||
|
||||
*str = '\0';
|
||||
|
||||
// prevent crash if called with base == 1
|
||||
if (base < 2) base = 10;
|
||||
|
||||
do {
|
||||
unsigned long m = n;
|
||||
n /= base;
|
||||
char c = m - base * n;
|
||||
*--str = c < 10 ? c + '0' : c + 'A' - 10;
|
||||
} while(n);
|
||||
|
||||
return write(str);
|
||||
}
|
||||
|
||||
size_t Print::printFloat(double number, uint8_t digits)
|
||||
{
|
||||
size_t n = 0;
|
||||
|
||||
if (isnan(number)) return print("nan");
|
||||
if (isinf(number)) return print("inf");
|
||||
if (number > 4294967040.0) return print ("ovf"); // constant determined empirically
|
||||
if (number <-4294967040.0) return print ("ovf"); // constant determined empirically
|
||||
|
||||
// Handle negative numbers
|
||||
if (number < 0.0)
|
||||
{
|
||||
n += print('-');
|
||||
number = -number;
|
||||
}
|
||||
|
||||
// Round correctly so that print(1.999, 2) prints as "2.00"
|
||||
double rounding = 0.5;
|
||||
for (uint8_t i=0; i<digits; ++i)
|
||||
rounding /= 10.0;
|
||||
|
||||
number += rounding;
|
||||
|
||||
// Extract the integer part of the number and print it
|
||||
unsigned long int_part = (unsigned long)number;
|
||||
double remainder = number - (double)int_part;
|
||||
n += print(int_part);
|
||||
|
||||
// Print the decimal point, but only if there are digits beyond
|
||||
if (digits > 0) {
|
||||
n += print(".");
|
||||
}
|
||||
|
||||
// Extract digits from the remainder one at a time
|
||||
while (digits-- > 0)
|
||||
{
|
||||
remainder *= 10.0;
|
||||
int toPrint = int(remainder);
|
||||
n += print(toPrint);
|
||||
remainder -= toPrint;
|
||||
}
|
||||
|
||||
return n;
|
||||
}
|
||||
@ -0,0 +1,81 @@
|
||||
/*
|
||||
Print.h - Base class that provides print() and println()
|
||||
Copyright (c) 2008 David A. Mellis. All right reserved.
|
||||
|
||||
This library is free software; you can redistribute it and/or
|
||||
modify it under the terms of the GNU Lesser General Public
|
||||
License as published by the Free Software Foundation; either
|
||||
version 2.1 of the License, or (at your option) any later version.
|
||||
|
||||
This library is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
||||
Lesser General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU Lesser General Public
|
||||
License along with this library; if not, write to the Free Software
|
||||
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||
*/
|
||||
|
||||
#ifndef Print_h
|
||||
#define Print_h
|
||||
|
||||
#include <inttypes.h>
|
||||
#include <stdio.h> // for size_t
|
||||
|
||||
#include "WString.h"
|
||||
#include "Printable.h"
|
||||
|
||||
#define DEC 10
|
||||
#define HEX 16
|
||||
#define OCT 8
|
||||
#define BIN 2
|
||||
|
||||
class Print
|
||||
{
|
||||
private:
|
||||
int write_error;
|
||||
size_t printNumber(unsigned long, uint8_t);
|
||||
size_t printFloat(double, uint8_t);
|
||||
protected:
|
||||
void setWriteError(int err = 1) { write_error = err; }
|
||||
public:
|
||||
Print() : write_error(0) {}
|
||||
|
||||
int getWriteError() { return write_error; }
|
||||
void clearWriteError() { setWriteError(0); }
|
||||
|
||||
virtual size_t write(uint8_t) = 0;
|
||||
size_t write(const char *str) {
|
||||
if (str == NULL) return 0;
|
||||
return write((const uint8_t *)str, strlen(str));
|
||||
}
|
||||
virtual size_t write(const uint8_t *buffer, size_t size);
|
||||
|
||||
size_t print(const __FlashStringHelper *);
|
||||
size_t print(const String &);
|
||||
size_t print(const char[]);
|
||||
size_t print(char);
|
||||
size_t print(unsigned char, int = DEC);
|
||||
size_t print(int, int = DEC);
|
||||
size_t print(unsigned int, int = DEC);
|
||||
size_t print(long, int = DEC);
|
||||
size_t print(unsigned long, int = DEC);
|
||||
size_t print(double, int = 2);
|
||||
size_t print(const Printable&);
|
||||
|
||||
size_t println(const __FlashStringHelper *);
|
||||
size_t println(const String &s);
|
||||
size_t println(const char[]);
|
||||
size_t println(char);
|
||||
size_t println(unsigned char, int = DEC);
|
||||
size_t println(int, int = DEC);
|
||||
size_t println(unsigned int, int = DEC);
|
||||
size_t println(long, int = DEC);
|
||||
size_t println(unsigned long, int = DEC);
|
||||
size_t println(double, int = 2);
|
||||
size_t println(const Printable&);
|
||||
size_t println(void);
|
||||
};
|
||||
|
||||
#endif
|
||||
@ -0,0 +1,40 @@
|
||||
/*
|
||||
Printable.h - Interface class that allows printing of complex types
|
||||
Copyright (c) 2011 Adrian McEwen. All right reserved.
|
||||
|
||||
This library is free software; you can redistribute it and/or
|
||||
modify it under the terms of the GNU Lesser General Public
|
||||
License as published by the Free Software Foundation; either
|
||||
version 2.1 of the License, or (at your option) any later version.
|
||||
|
||||
This library is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
||||
Lesser General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU Lesser General Public
|
||||
License along with this library; if not, write to the Free Software
|
||||
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||
*/
|
||||
|
||||
#ifndef Printable_h
|
||||
#define Printable_h
|
||||
|
||||
#include <new.h>
|
||||
|
||||
class Print;
|
||||
|
||||
/** The Printable class provides a way for new classes to allow themselves to be printed.
|
||||
By deriving from Printable and implementing the printTo method, it will then be possible
|
||||
for users to print out instances of this class by passing them into the usual
|
||||
Print::print and Print::println methods.
|
||||
*/
|
||||
|
||||
class Printable
|
||||
{
|
||||
public:
|
||||
virtual size_t printTo(Print& p) const = 0;
|
||||
};
|
||||
|
||||
#endif
|
||||
|
||||
@ -0,0 +1,9 @@
|
||||
#ifndef server_h
|
||||
#define server_h
|
||||
|
||||
class Server : public Print {
|
||||
public:
|
||||
virtual void begin() =0;
|
||||
};
|
||||
|
||||
#endif
|
||||
@ -0,0 +1,270 @@
|
||||
/*
|
||||
Stream.cpp - adds parsing methods to Stream class
|
||||
Copyright (c) 2008 David A. Mellis. All right reserved.
|
||||
|
||||
This library is free software; you can redistribute it and/or
|
||||
modify it under the terms of the GNU Lesser General Public
|
||||
License as published by the Free Software Foundation; either
|
||||
version 2.1 of the License, or (at your option) any later version.
|
||||
|
||||
This library is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
||||
Lesser General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU Lesser General Public
|
||||
License along with this library; if not, write to the Free Software
|
||||
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||
|
||||
Created July 2011
|
||||
parsing functions based on TextFinder library by Michael Margolis
|
||||
*/
|
||||
|
||||
#include "Arduino.h"
|
||||
#include "Stream.h"
|
||||
|
||||
#define PARSE_TIMEOUT 1000 // default number of milli-seconds to wait
|
||||
#define NO_SKIP_CHAR 1 // a magic char not found in a valid ASCII numeric field
|
||||
|
||||
// private method to read stream with timeout
|
||||
int Stream::timedRead()
|
||||
{
|
||||
int c;
|
||||
_startMillis = millis();
|
||||
do {
|
||||
c = read();
|
||||
if (c >= 0) return c;
|
||||
} while(millis() - _startMillis < _timeout);
|
||||
return -1; // -1 indicates timeout
|
||||
}
|
||||
|
||||
// private method to peek stream with timeout
|
||||
int Stream::timedPeek()
|
||||
{
|
||||
int c;
|
||||
_startMillis = millis();
|
||||
do {
|
||||
c = peek();
|
||||
if (c >= 0) return c;
|
||||
} while(millis() - _startMillis < _timeout);
|
||||
return -1; // -1 indicates timeout
|
||||
}
|
||||
|
||||
// returns peek of the next digit in the stream or -1 if timeout
|
||||
// discards non-numeric characters
|
||||
int Stream::peekNextDigit()
|
||||
{
|
||||
int c;
|
||||
while (1) {
|
||||
c = timedPeek();
|
||||
if (c < 0) return c; // timeout
|
||||
if (c == '-') return c;
|
||||
if (c >= '0' && c <= '9') return c;
|
||||
read(); // discard non-numeric
|
||||
}
|
||||
}
|
||||
|
||||
// Public Methods
|
||||
//////////////////////////////////////////////////////////////
|
||||
|
||||
void Stream::setTimeout(unsigned long timeout) // sets the maximum number of milliseconds to wait
|
||||
{
|
||||
_timeout = timeout;
|
||||
}
|
||||
|
||||
// find returns true if the target string is found
|
||||
bool Stream::find(char *target)
|
||||
{
|
||||
return findUntil(target, NULL);
|
||||
}
|
||||
|
||||
// reads data from the stream until the target string of given length is found
|
||||
// returns true if target string is found, false if timed out
|
||||
bool Stream::find(char *target, size_t length)
|
||||
{
|
||||
return findUntil(target, length, NULL, 0);
|
||||
}
|
||||
|
||||
// as find but search ends if the terminator string is found
|
||||
bool Stream::findUntil(char *target, char *terminator)
|
||||
{
|
||||
return findUntil(target, strlen(target), terminator, strlen(terminator));
|
||||
}
|
||||
|
||||
// reads data from the stream until the target string of the given length is found
|
||||
// search terminated if the terminator string is found
|
||||
// returns true if target string is found, false if terminated or timed out
|
||||
bool Stream::findUntil(char *target, size_t targetLen, char *terminator, size_t termLen)
|
||||
{
|
||||
size_t index = 0; // maximum target string length is 64k bytes!
|
||||
size_t termIndex = 0;
|
||||
int c;
|
||||
|
||||
if( *target == 0)
|
||||
return true; // return true if target is a null string
|
||||
while( (c = timedRead()) > 0){
|
||||
|
||||
if(c != target[index])
|
||||
index = 0; // reset index if any char does not match
|
||||
|
||||
if( c == target[index]){
|
||||
//////Serial.print("found "); Serial.write(c); Serial.print("index now"); Serial.println(index+1);
|
||||
if(++index >= targetLen){ // return true if all chars in the target match
|
||||
return true;
|
||||
}
|
||||
}
|
||||
|
||||
if(termLen > 0 && c == terminator[termIndex]){
|
||||
if(++termIndex >= termLen)
|
||||
return false; // return false if terminate string found before target string
|
||||
}
|
||||
else
|
||||
termIndex = 0;
|
||||
}
|
||||
return false;
|
||||
}
|
||||
|
||||
|
||||
// returns the first valid (long) integer value from the current position.
|
||||
// initial characters that are not digits (or the minus sign) are skipped
|
||||
// function is terminated by the first character that is not a digit.
|
||||
long Stream::parseInt()
|
||||
{
|
||||
return parseInt(NO_SKIP_CHAR); // terminate on first non-digit character (or timeout)
|
||||
}
|
||||
|
||||
// as above but a given skipChar is ignored
|
||||
// this allows format characters (typically commas) in values to be ignored
|
||||
long Stream::parseInt(char skipChar)
|
||||
{
|
||||
boolean isNegative = false;
|
||||
long value = 0;
|
||||
int c;
|
||||
|
||||
c = peekNextDigit();
|
||||
// ignore non numeric leading characters
|
||||
if(c < 0)
|
||||
return 0; // zero returned if timeout
|
||||
|
||||
do{
|
||||
if(c == skipChar)
|
||||
; // ignore this charactor
|
||||
else if(c == '-')
|
||||
isNegative = true;
|
||||
else if(c >= '0' && c <= '9') // is c a digit?
|
||||
value = value * 10 + c - '0';
|
||||
read(); // consume the character we got with peek
|
||||
c = timedPeek();
|
||||
}
|
||||
while( (c >= '0' && c <= '9') || c == skipChar );
|
||||
|
||||
if(isNegative)
|
||||
value = -value;
|
||||
return value;
|
||||
}
|
||||
|
||||
|
||||
// as parseInt but returns a floating point value
|
||||
float Stream::parseFloat()
|
||||
{
|
||||
return parseFloat(NO_SKIP_CHAR);
|
||||
}
|
||||
|
||||
// as above but the given skipChar is ignored
|
||||
// this allows format characters (typically commas) in values to be ignored
|
||||
float Stream::parseFloat(char skipChar){
|
||||
boolean isNegative = false;
|
||||
boolean isFraction = false;
|
||||
long value = 0;
|
||||
char c;
|
||||
float fraction = 1.0;
|
||||
|
||||
c = peekNextDigit();
|
||||
// ignore non numeric leading characters
|
||||
if(c < 0)
|
||||
return 0; // zero returned if timeout
|
||||
|
||||
do{
|
||||
if(c == skipChar)
|
||||
; // ignore
|
||||
else if(c == '-')
|
||||
isNegative = true;
|
||||
else if (c == '.')
|
||||
isFraction = true;
|
||||
else if(c >= '0' && c <= '9') { // is c a digit?
|
||||
value = value * 10 + c - '0';
|
||||
if(isFraction)
|
||||
fraction *= 0.1;
|
||||
}
|
||||
read(); // consume the character we got with peek
|
||||
c = timedPeek();
|
||||
}
|
||||
while( (c >= '0' && c <= '9') || c == '.' || c == skipChar );
|
||||
|
||||
if(isNegative)
|
||||
value = -value;
|
||||
if(isFraction)
|
||||
return value * fraction;
|
||||
else
|
||||
return value;
|
||||
}
|
||||
|
||||
// read characters from stream into buffer
|
||||
// terminates if length characters have been read, or timeout (see setTimeout)
|
||||
// returns the number of characters placed in the buffer
|
||||
// the buffer is NOT null terminated.
|
||||
//
|
||||
size_t Stream::readBytes(char *buffer, size_t length)
|
||||
{
|
||||
size_t count = 0;
|
||||
while (count < length) {
|
||||
int c = timedRead();
|
||||
if (c < 0) break;
|
||||
*buffer++ = (char)c;
|
||||
count++;
|
||||
}
|
||||
return count;
|
||||
}
|
||||
|
||||
|
||||
// as readBytes with terminator character
|
||||
// terminates if length characters have been read, timeout, or if the terminator character detected
|
||||
// returns the number of characters placed in the buffer (0 means no valid data found)
|
||||
|
||||
size_t Stream::readBytesUntil(char terminator, char *buffer, size_t length)
|
||||
{
|
||||
if (length < 1) return 0;
|
||||
size_t index = 0;
|
||||
while (index < length) {
|
||||
int c = timedRead();
|
||||
if (c < 0 || c == terminator) break;
|
||||
*buffer++ = (char)c;
|
||||
index++;
|
||||
}
|
||||
return index; // return number of characters, not including null terminator
|
||||
}
|
||||
|
||||
String Stream::readString()
|
||||
{
|
||||
String ret;
|
||||
int c = timedRead();
|
||||
while (c >= 0)
|
||||
{
|
||||
ret += (char)c;
|
||||
c = timedRead();
|
||||
}
|
||||
return ret;
|
||||
}
|
||||
|
||||
String Stream::readStringUntil(char terminator)
|
||||
{
|
||||
String ret;
|
||||
int c = timedRead();
|
||||
while (c >= 0 && c != terminator)
|
||||
{
|
||||
ret += (char)c;
|
||||
c = timedRead();
|
||||
}
|
||||
return ret;
|
||||
}
|
||||
|
||||
@ -0,0 +1,96 @@
|
||||
/*
|
||||
Stream.h - base class for character-based streams.
|
||||
Copyright (c) 2010 David A. Mellis. All right reserved.
|
||||
|
||||
This library is free software; you can redistribute it and/or
|
||||
modify it under the terms of the GNU Lesser General Public
|
||||
License as published by the Free Software Foundation; either
|
||||
version 2.1 of the License, or (at your option) any later version.
|
||||
|
||||
This library is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
||||
Lesser General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU Lesser General Public
|
||||
License along with this library; if not, write to the Free Software
|
||||
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||
|
||||
parsing functions based on TextFinder library by Michael Margolis
|
||||
*/
|
||||
|
||||
#ifndef Stream_h
|
||||
#define Stream_h
|
||||
|
||||
#include <inttypes.h>
|
||||
#include "Print.h"
|
||||
|
||||
// compatability macros for testing
|
||||
/*
|
||||
#define getInt() parseInt()
|
||||
#define getInt(skipChar) parseInt(skipchar)
|
||||
#define getFloat() parseFloat()
|
||||
#define getFloat(skipChar) parseFloat(skipChar)
|
||||
#define getString( pre_string, post_string, buffer, length)
|
||||
readBytesBetween( pre_string, terminator, buffer, length)
|
||||
*/
|
||||
|
||||
class Stream : public Print
|
||||
{
|
||||
private:
|
||||
unsigned long _timeout; // number of milliseconds to wait for the next char before aborting timed read
|
||||
unsigned long _startMillis; // used for timeout measurement
|
||||
int timedRead(); // private method to read stream with timeout
|
||||
int timedPeek(); // private method to peek stream with timeout
|
||||
int peekNextDigit(); // returns the next numeric digit in the stream or -1 if timeout
|
||||
|
||||
public:
|
||||
virtual int available() = 0;
|
||||
virtual int read() = 0;
|
||||
virtual int peek() = 0;
|
||||
virtual void flush() = 0;
|
||||
|
||||
Stream() {_timeout=1000;}
|
||||
|
||||
// parsing methods
|
||||
|
||||
void setTimeout(unsigned long timeout); // sets maximum milliseconds to wait for stream data, default is 1 second
|
||||
|
||||
bool find(char *target); // reads data from the stream until the target string is found
|
||||
// returns true if target string is found, false if timed out (see setTimeout)
|
||||
|
||||
bool find(char *target, size_t length); // reads data from the stream until the target string of given length is found
|
||||
// returns true if target string is found, false if timed out
|
||||
|
||||
bool findUntil(char *target, char *terminator); // as find but search ends if the terminator string is found
|
||||
|
||||
bool findUntil(char *target, size_t targetLen, char *terminate, size_t termLen); // as above but search ends if the terminate string is found
|
||||
|
||||
|
||||
long parseInt(); // returns the first valid (long) integer value from the current position.
|
||||
// initial characters that are not digits (or the minus sign) are skipped
|
||||
// integer is terminated by the first character that is not a digit.
|
||||
|
||||
float parseFloat(); // float version of parseInt
|
||||
|
||||
size_t readBytes( char *buffer, size_t length); // read chars from stream into buffer
|
||||
// terminates if length characters have been read or timeout (see setTimeout)
|
||||
// returns the number of characters placed in the buffer (0 means no valid data found)
|
||||
|
||||
size_t readBytesUntil( char terminator, char *buffer, size_t length); // as readBytes with terminator character
|
||||
// terminates if length characters have been read, timeout, or if the terminator character detected
|
||||
// returns the number of characters placed in the buffer (0 means no valid data found)
|
||||
|
||||
// Arduino String functions to be added here
|
||||
String readString();
|
||||
String readStringUntil(char terminator);
|
||||
|
||||
protected:
|
||||
long parseInt(char skipChar); // as above but the given skipChar is ignored
|
||||
// as above but the given skipChar is ignored
|
||||
// this allows format characters (typically commas) in values to be ignored
|
||||
|
||||
float parseFloat(char skipChar); // as above but the given skipChar is ignored
|
||||
};
|
||||
|
||||
#endif
|
||||
@ -0,0 +1,616 @@
|
||||
/* Tone.cpp
|
||||
|
||||
A Tone Generator Library
|
||||
|
||||
Written by Brett Hagman
|
||||
|
||||
This library is free software; you can redistribute it and/or
|
||||
modify it under the terms of the GNU Lesser General Public
|
||||
License as published by the Free Software Foundation; either
|
||||
version 2.1 of the License, or (at your option) any later version.
|
||||
|
||||
This library is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
||||
Lesser General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU Lesser General Public
|
||||
License along with this library; if not, write to the Free Software
|
||||
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||
|
||||
Version Modified By Date Comments
|
||||
------- ----------- -------- --------
|
||||
0001 B Hagman 09/08/02 Initial coding
|
||||
0002 B Hagman 09/08/18 Multiple pins
|
||||
0003 B Hagman 09/08/18 Moved initialization from constructor to begin()
|
||||
0004 B Hagman 09/09/26 Fixed problems with ATmega8
|
||||
0005 B Hagman 09/11/23 Scanned prescalars for best fit on 8 bit timers
|
||||
09/11/25 Changed pin toggle method to XOR
|
||||
09/11/25 Fixed timer0 from being excluded
|
||||
0006 D Mellis 09/12/29 Replaced objects with functions
|
||||
0007 M Sproul 10/08/29 Changed #ifdefs from cpu to register
|
||||
0008 S Kanemoto 12/06/22 Fixed for Leonardo by @maris_HY
|
||||
*************************************************/
|
||||
|
||||
#include <avr/interrupt.h>
|
||||
#include <avr/pgmspace.h>
|
||||
#include "Arduino.h"
|
||||
#include "pins_arduino.h"
|
||||
|
||||
#if defined(__AVR_ATmega8__) || defined(__AVR_ATmega128__)
|
||||
#define TCCR2A TCCR2
|
||||
#define TCCR2B TCCR2
|
||||
#define COM2A1 COM21
|
||||
#define COM2A0 COM20
|
||||
#define OCR2A OCR2
|
||||
#define TIMSK2 TIMSK
|
||||
#define OCIE2A OCIE2
|
||||
#define TIMER2_COMPA_vect TIMER2_COMP_vect
|
||||
#define TIMSK1 TIMSK
|
||||
#endif
|
||||
|
||||
// timerx_toggle_count:
|
||||
// > 0 - duration specified
|
||||
// = 0 - stopped
|
||||
// < 0 - infinitely (until stop() method called, or new play() called)
|
||||
|
||||
#if !defined(__AVR_ATmega8__)
|
||||
volatile long timer0_toggle_count;
|
||||
volatile uint8_t *timer0_pin_port;
|
||||
volatile uint8_t timer0_pin_mask;
|
||||
#endif
|
||||
|
||||
volatile long timer1_toggle_count;
|
||||
volatile uint8_t *timer1_pin_port;
|
||||
volatile uint8_t timer1_pin_mask;
|
||||
volatile long timer2_toggle_count;
|
||||
volatile uint8_t *timer2_pin_port;
|
||||
volatile uint8_t timer2_pin_mask;
|
||||
|
||||
#if defined(TIMSK3)
|
||||
volatile long timer3_toggle_count;
|
||||
volatile uint8_t *timer3_pin_port;
|
||||
volatile uint8_t timer3_pin_mask;
|
||||
#endif
|
||||
|
||||
#if defined(TIMSK4)
|
||||
volatile long timer4_toggle_count;
|
||||
volatile uint8_t *timer4_pin_port;
|
||||
volatile uint8_t timer4_pin_mask;
|
||||
#endif
|
||||
|
||||
#if defined(TIMSK5)
|
||||
volatile long timer5_toggle_count;
|
||||
volatile uint8_t *timer5_pin_port;
|
||||
volatile uint8_t timer5_pin_mask;
|
||||
#endif
|
||||
|
||||
|
||||
#if defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__)
|
||||
|
||||
#define AVAILABLE_TONE_PINS 1
|
||||
#define USE_TIMER2
|
||||
|
||||
const uint8_t PROGMEM tone_pin_to_timer_PGM[] = { 2 /*, 3, 4, 5, 1, 0 */ };
|
||||
static uint8_t tone_pins[AVAILABLE_TONE_PINS] = { 255 /*, 255, 255, 255, 255, 255 */ };
|
||||
|
||||
#elif defined(__AVR_ATmega8__)
|
||||
|
||||
#define AVAILABLE_TONE_PINS 1
|
||||
#define USE_TIMER2
|
||||
|
||||
const uint8_t PROGMEM tone_pin_to_timer_PGM[] = { 2 /*, 1 */ };
|
||||
static uint8_t tone_pins[AVAILABLE_TONE_PINS] = { 255 /*, 255 */ };
|
||||
|
||||
#elif defined(__AVR_ATmega32U4__)
|
||||
|
||||
#define AVAILABLE_TONE_PINS 1
|
||||
#define USE_TIMER3
|
||||
|
||||
const uint8_t PROGMEM tone_pin_to_timer_PGM[] = { 3 /*, 1 */ };
|
||||
static uint8_t tone_pins[AVAILABLE_TONE_PINS] = { 255 /*, 255 */ };
|
||||
|
||||
#else
|
||||
|
||||
#define AVAILABLE_TONE_PINS 1
|
||||
#define USE_TIMER2
|
||||
|
||||
// Leave timer 0 to last.
|
||||
const uint8_t PROGMEM tone_pin_to_timer_PGM[] = { 2 /*, 1, 0 */ };
|
||||
static uint8_t tone_pins[AVAILABLE_TONE_PINS] = { 255 /*, 255, 255 */ };
|
||||
|
||||
#endif
|
||||
|
||||
|
||||
|
||||
static int8_t toneBegin(uint8_t _pin)
|
||||
{
|
||||
int8_t _timer = -1;
|
||||
|
||||
// if we're already using the pin, the timer should be configured.
|
||||
for (int i = 0; i < AVAILABLE_TONE_PINS; i++) {
|
||||
if (tone_pins[i] == _pin) {
|
||||
return pgm_read_byte(tone_pin_to_timer_PGM + i);
|
||||
}
|
||||
}
|
||||
|
||||
// search for an unused timer.
|
||||
for (int i = 0; i < AVAILABLE_TONE_PINS; i++) {
|
||||
if (tone_pins[i] == 255) {
|
||||
tone_pins[i] = _pin;
|
||||
_timer = pgm_read_byte(tone_pin_to_timer_PGM + i);
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
||||
if (_timer != -1)
|
||||
{
|
||||
// Set timer specific stuff
|
||||
// All timers in CTC mode
|
||||
// 8 bit timers will require changing prescalar values,
|
||||
// whereas 16 bit timers are set to either ck/1 or ck/64 prescalar
|
||||
switch (_timer)
|
||||
{
|
||||
#if defined(TCCR0A) && defined(TCCR0B)
|
||||
case 0:
|
||||
// 8 bit timer
|
||||
TCCR0A = 0;
|
||||
TCCR0B = 0;
|
||||
bitWrite(TCCR0A, WGM01, 1);
|
||||
bitWrite(TCCR0B, CS00, 1);
|
||||
timer0_pin_port = portOutputRegister(digitalPinToPort(_pin));
|
||||
timer0_pin_mask = digitalPinToBitMask(_pin);
|
||||
break;
|
||||
#endif
|
||||
|
||||
#if defined(TCCR1A) && defined(TCCR1B) && defined(WGM12)
|
||||
case 1:
|
||||
// 16 bit timer
|
||||
TCCR1A = 0;
|
||||
TCCR1B = 0;
|
||||
bitWrite(TCCR1B, WGM12, 1);
|
||||
bitWrite(TCCR1B, CS10, 1);
|
||||
timer1_pin_port = portOutputRegister(digitalPinToPort(_pin));
|
||||
timer1_pin_mask = digitalPinToBitMask(_pin);
|
||||
break;
|
||||
#endif
|
||||
|
||||
#if defined(TCCR2A) && defined(TCCR2B)
|
||||
case 2:
|
||||
// 8 bit timer
|
||||
TCCR2A = 0;
|
||||
TCCR2B = 0;
|
||||
bitWrite(TCCR2A, WGM21, 1);
|
||||
bitWrite(TCCR2B, CS20, 1);
|
||||
timer2_pin_port = portOutputRegister(digitalPinToPort(_pin));
|
||||
timer2_pin_mask = digitalPinToBitMask(_pin);
|
||||
break;
|
||||
#endif
|
||||
|
||||
#if defined(TCCR3A) && defined(TCCR3B) && defined(TIMSK3)
|
||||
case 3:
|
||||
// 16 bit timer
|
||||
TCCR3A = 0;
|
||||
TCCR3B = 0;
|
||||
bitWrite(TCCR3B, WGM32, 1);
|
||||
bitWrite(TCCR3B, CS30, 1);
|
||||
timer3_pin_port = portOutputRegister(digitalPinToPort(_pin));
|
||||
timer3_pin_mask = digitalPinToBitMask(_pin);
|
||||
break;
|
||||
#endif
|
||||
|
||||
#if defined(TCCR4A) && defined(TCCR4B) && defined(TIMSK4)
|
||||
case 4:
|
||||
// 16 bit timer
|
||||
TCCR4A = 0;
|
||||
TCCR4B = 0;
|
||||
#if defined(WGM42)
|
||||
bitWrite(TCCR4B, WGM42, 1);
|
||||
#elif defined(CS43)
|
||||
#warning this may not be correct
|
||||
// atmega32u4
|
||||
bitWrite(TCCR4B, CS43, 1);
|
||||
#endif
|
||||
bitWrite(TCCR4B, CS40, 1);
|
||||
timer4_pin_port = portOutputRegister(digitalPinToPort(_pin));
|
||||
timer4_pin_mask = digitalPinToBitMask(_pin);
|
||||
break;
|
||||
#endif
|
||||
|
||||
#if defined(TCCR5A) && defined(TCCR5B) && defined(TIMSK5)
|
||||
case 5:
|
||||
// 16 bit timer
|
||||
TCCR5A = 0;
|
||||
TCCR5B = 0;
|
||||
bitWrite(TCCR5B, WGM52, 1);
|
||||
bitWrite(TCCR5B, CS50, 1);
|
||||
timer5_pin_port = portOutputRegister(digitalPinToPort(_pin));
|
||||
timer5_pin_mask = digitalPinToBitMask(_pin);
|
||||
break;
|
||||
#endif
|
||||
}
|
||||
}
|
||||
|
||||
return _timer;
|
||||
}
|
||||
|
||||
|
||||
|
||||
// frequency (in hertz) and duration (in milliseconds).
|
||||
|
||||
void tone(uint8_t _pin, unsigned int frequency, unsigned long duration)
|
||||
{
|
||||
uint8_t prescalarbits = 0b001;
|
||||
long toggle_count = 0;
|
||||
uint32_t ocr = 0;
|
||||
int8_t _timer;
|
||||
|
||||
_timer = toneBegin(_pin);
|
||||
|
||||
if (_timer >= 0)
|
||||
{
|
||||
// Set the pinMode as OUTPUT
|
||||
pinMode(_pin, OUTPUT);
|
||||
|
||||
// if we are using an 8 bit timer, scan through prescalars to find the best fit
|
||||
if (_timer == 0 || _timer == 2)
|
||||
{
|
||||
ocr = F_CPU / frequency / 2 - 1;
|
||||
prescalarbits = 0b001; // ck/1: same for both timers
|
||||
if (ocr > 255)
|
||||
{
|
||||
ocr = F_CPU / frequency / 2 / 8 - 1;
|
||||
prescalarbits = 0b010; // ck/8: same for both timers
|
||||
|
||||
if (_timer == 2 && ocr > 255)
|
||||
{
|
||||
ocr = F_CPU / frequency / 2 / 32 - 1;
|
||||
prescalarbits = 0b011;
|
||||
}
|
||||
|
||||
if (ocr > 255)
|
||||
{
|
||||
ocr = F_CPU / frequency / 2 / 64 - 1;
|
||||
prescalarbits = _timer == 0 ? 0b011 : 0b100;
|
||||
|
||||
if (_timer == 2 && ocr > 255)
|
||||
{
|
||||
ocr = F_CPU / frequency / 2 / 128 - 1;
|
||||
prescalarbits = 0b101;
|
||||
}
|
||||
|
||||
if (ocr > 255)
|
||||
{
|
||||
ocr = F_CPU / frequency / 2 / 256 - 1;
|
||||
prescalarbits = _timer == 0 ? 0b100 : 0b110;
|
||||
if (ocr > 255)
|
||||
{
|
||||
// can't do any better than /1024
|
||||
ocr = F_CPU / frequency / 2 / 1024 - 1;
|
||||
prescalarbits = _timer == 0 ? 0b101 : 0b111;
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
#if defined(TCCR0B)
|
||||
if (_timer == 0)
|
||||
{
|
||||
TCCR0B = prescalarbits;
|
||||
}
|
||||
else
|
||||
#endif
|
||||
#if defined(TCCR2B)
|
||||
{
|
||||
TCCR2B = prescalarbits;
|
||||
}
|
||||
#else
|
||||
{
|
||||
// dummy place holder to make the above ifdefs work
|
||||
}
|
||||
#endif
|
||||
}
|
||||
else
|
||||
{
|
||||
// two choices for the 16 bit timers: ck/1 or ck/64
|
||||
ocr = F_CPU / frequency / 2 - 1;
|
||||
|
||||
prescalarbits = 0b001;
|
||||
if (ocr > 0xffff)
|
||||
{
|
||||
ocr = F_CPU / frequency / 2 / 64 - 1;
|
||||
prescalarbits = 0b011;
|
||||
}
|
||||
|
||||
if (_timer == 1)
|
||||
{
|
||||
#if defined(TCCR1B)
|
||||
TCCR1B = (TCCR1B & 0b11111000) | prescalarbits;
|
||||
#endif
|
||||
}
|
||||
#if defined(TCCR3B)
|
||||
else if (_timer == 3)
|
||||
TCCR3B = (TCCR3B & 0b11111000) | prescalarbits;
|
||||
#endif
|
||||
#if defined(TCCR4B)
|
||||
else if (_timer == 4)
|
||||
TCCR4B = (TCCR4B & 0b11111000) | prescalarbits;
|
||||
#endif
|
||||
#if defined(TCCR5B)
|
||||
else if (_timer == 5)
|
||||
TCCR5B = (TCCR5B & 0b11111000) | prescalarbits;
|
||||
#endif
|
||||
|
||||
}
|
||||
|
||||
|
||||
// Calculate the toggle count
|
||||
if (duration > 0)
|
||||
{
|
||||
toggle_count = 2 * frequency * duration / 1000;
|
||||
}
|
||||
else
|
||||
{
|
||||
toggle_count = -1;
|
||||
}
|
||||
|
||||
// Set the OCR for the given timer,
|
||||
// set the toggle count,
|
||||
// then turn on the interrupts
|
||||
switch (_timer)
|
||||
{
|
||||
|
||||
#if defined(OCR0A) && defined(TIMSK0) && defined(OCIE0A)
|
||||
case 0:
|
||||
OCR0A = ocr;
|
||||
timer0_toggle_count = toggle_count;
|
||||
bitWrite(TIMSK0, OCIE0A, 1);
|
||||
break;
|
||||
#endif
|
||||
|
||||
case 1:
|
||||
#if defined(OCR1A) && defined(TIMSK1) && defined(OCIE1A)
|
||||
OCR1A = ocr;
|
||||
timer1_toggle_count = toggle_count;
|
||||
bitWrite(TIMSK1, OCIE1A, 1);
|
||||
#elif defined(OCR1A) && defined(TIMSK) && defined(OCIE1A)
|
||||
// this combination is for at least the ATmega32
|
||||
OCR1A = ocr;
|
||||
timer1_toggle_count = toggle_count;
|
||||
bitWrite(TIMSK, OCIE1A, 1);
|
||||
#endif
|
||||
break;
|
||||
|
||||
#if defined(OCR2A) && defined(TIMSK2) && defined(OCIE2A)
|
||||
case 2:
|
||||
OCR2A = ocr;
|
||||
timer2_toggle_count = toggle_count;
|
||||
bitWrite(TIMSK2, OCIE2A, 1);
|
||||
break;
|
||||
#endif
|
||||
|
||||
#if defined(TIMSK3)
|
||||
case 3:
|
||||
OCR3A = ocr;
|
||||
timer3_toggle_count = toggle_count;
|
||||
bitWrite(TIMSK3, OCIE3A, 1);
|
||||
break;
|
||||
#endif
|
||||
|
||||
#if defined(TIMSK4)
|
||||
case 4:
|
||||
OCR4A = ocr;
|
||||
timer4_toggle_count = toggle_count;
|
||||
bitWrite(TIMSK4, OCIE4A, 1);
|
||||
break;
|
||||
#endif
|
||||
|
||||
#if defined(OCR5A) && defined(TIMSK5) && defined(OCIE5A)
|
||||
case 5:
|
||||
OCR5A = ocr;
|
||||
timer5_toggle_count = toggle_count;
|
||||
bitWrite(TIMSK5, OCIE5A, 1);
|
||||
break;
|
||||
#endif
|
||||
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
// XXX: this function only works properly for timer 2 (the only one we use
|
||||
// currently). for the others, it should end the tone, but won't restore
|
||||
// proper PWM functionality for the timer.
|
||||
void disableTimer(uint8_t _timer)
|
||||
{
|
||||
switch (_timer)
|
||||
{
|
||||
case 0:
|
||||
#if defined(TIMSK0)
|
||||
TIMSK0 = 0;
|
||||
#elif defined(TIMSK)
|
||||
TIMSK = 0; // atmega32
|
||||
#endif
|
||||
break;
|
||||
|
||||
#if defined(TIMSK1) && defined(OCIE1A)
|
||||
case 1:
|
||||
bitWrite(TIMSK1, OCIE1A, 0);
|
||||
break;
|
||||
#endif
|
||||
|
||||
case 2:
|
||||
#if defined(TIMSK2) && defined(OCIE2A)
|
||||
bitWrite(TIMSK2, OCIE2A, 0); // disable interrupt
|
||||
#endif
|
||||
#if defined(TCCR2A) && defined(WGM20)
|
||||
TCCR2A = (1 << WGM20);
|
||||
#endif
|
||||
#if defined(TCCR2B) && defined(CS22)
|
||||
TCCR2B = (TCCR2B & 0b11111000) | (1 << CS22);
|
||||
#endif
|
||||
#if defined(OCR2A)
|
||||
OCR2A = 0;
|
||||
#endif
|
||||
break;
|
||||
|
||||
#if defined(TIMSK3)
|
||||
case 3:
|
||||
TIMSK3 = 0;
|
||||
break;
|
||||
#endif
|
||||
|
||||
#if defined(TIMSK4)
|
||||
case 4:
|
||||
TIMSK4 = 0;
|
||||
break;
|
||||
#endif
|
||||
|
||||
#if defined(TIMSK5)
|
||||
case 5:
|
||||
TIMSK5 = 0;
|
||||
break;
|
||||
#endif
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
void noTone(uint8_t _pin)
|
||||
{
|
||||
int8_t _timer = -1;
|
||||
|
||||
for (int i = 0; i < AVAILABLE_TONE_PINS; i++) {
|
||||
if (tone_pins[i] == _pin) {
|
||||
_timer = pgm_read_byte(tone_pin_to_timer_PGM + i);
|
||||
tone_pins[i] = 255;
|
||||
}
|
||||
}
|
||||
|
||||
disableTimer(_timer);
|
||||
|
||||
digitalWrite(_pin, 0);
|
||||
}
|
||||
|
||||
#ifdef USE_TIMER0
|
||||
ISR(TIMER0_COMPA_vect)
|
||||
{
|
||||
if (timer0_toggle_count != 0)
|
||||
{
|
||||
// toggle the pin
|
||||
*timer0_pin_port ^= timer0_pin_mask;
|
||||
|
||||
if (timer0_toggle_count > 0)
|
||||
timer0_toggle_count--;
|
||||
}
|
||||
else
|
||||
{
|
||||
disableTimer(0);
|
||||
*timer0_pin_port &= ~(timer0_pin_mask); // keep pin low after stop
|
||||
}
|
||||
}
|
||||
#endif
|
||||
|
||||
|
||||
#ifdef USE_TIMER1
|
||||
ISR(TIMER1_COMPA_vect)
|
||||
{
|
||||
if (timer1_toggle_count != 0)
|
||||
{
|
||||
// toggle the pin
|
||||
*timer1_pin_port ^= timer1_pin_mask;
|
||||
|
||||
if (timer1_toggle_count > 0)
|
||||
timer1_toggle_count--;
|
||||
}
|
||||
else
|
||||
{
|
||||
disableTimer(1);
|
||||
*timer1_pin_port &= ~(timer1_pin_mask); // keep pin low after stop
|
||||
}
|
||||
}
|
||||
#endif
|
||||
|
||||
|
||||
#ifdef USE_TIMER2
|
||||
ISR(TIMER2_COMPA_vect)
|
||||
{
|
||||
|
||||
if (timer2_toggle_count != 0)
|
||||
{
|
||||
// toggle the pin
|
||||
*timer2_pin_port ^= timer2_pin_mask;
|
||||
|
||||
if (timer2_toggle_count > 0)
|
||||
timer2_toggle_count--;
|
||||
}
|
||||
else
|
||||
{
|
||||
// need to call noTone() so that the tone_pins[] entry is reset, so the
|
||||
// timer gets initialized next time we call tone().
|
||||
// XXX: this assumes timer 2 is always the first one used.
|
||||
noTone(tone_pins[0]);
|
||||
// disableTimer(2);
|
||||
// *timer2_pin_port &= ~(timer2_pin_mask); // keep pin low after stop
|
||||
}
|
||||
}
|
||||
#endif
|
||||
|
||||
|
||||
#ifdef USE_TIMER3
|
||||
ISR(TIMER3_COMPA_vect)
|
||||
{
|
||||
if (timer3_toggle_count != 0)
|
||||
{
|
||||
// toggle the pin
|
||||
*timer3_pin_port ^= timer3_pin_mask;
|
||||
|
||||
if (timer3_toggle_count > 0)
|
||||
timer3_toggle_count--;
|
||||
}
|
||||
else
|
||||
{
|
||||
disableTimer(3);
|
||||
*timer3_pin_port &= ~(timer3_pin_mask); // keep pin low after stop
|
||||
}
|
||||
}
|
||||
#endif
|
||||
|
||||
|
||||
#ifdef USE_TIMER4
|
||||
ISR(TIMER4_COMPA_vect)
|
||||
{
|
||||
if (timer4_toggle_count != 0)
|
||||
{
|
||||
// toggle the pin
|
||||
*timer4_pin_port ^= timer4_pin_mask;
|
||||
|
||||
if (timer4_toggle_count > 0)
|
||||
timer4_toggle_count--;
|
||||
}
|
||||
else
|
||||
{
|
||||
disableTimer(4);
|
||||
*timer4_pin_port &= ~(timer4_pin_mask); // keep pin low after stop
|
||||
}
|
||||
}
|
||||
#endif
|
||||
|
||||
|
||||
#ifdef USE_TIMER5
|
||||
ISR(TIMER5_COMPA_vect)
|
||||
{
|
||||
if (timer5_toggle_count != 0)
|
||||
{
|
||||
// toggle the pin
|
||||
*timer5_pin_port ^= timer5_pin_mask;
|
||||
|
||||
if (timer5_toggle_count > 0)
|
||||
timer5_toggle_count--;
|
||||
}
|
||||
else
|
||||
{
|
||||
disableTimer(5);
|
||||
*timer5_pin_port &= ~(timer5_pin_mask); // keep pin low after stop
|
||||
}
|
||||
}
|
||||
#endif
|
||||
@ -0,0 +1,196 @@
|
||||
|
||||
|
||||
#ifndef __USBAPI__
|
||||
#define __USBAPI__
|
||||
|
||||
#if defined(USBCON)
|
||||
|
||||
//================================================================================
|
||||
//================================================================================
|
||||
// USB
|
||||
|
||||
class USBDevice_
|
||||
{
|
||||
public:
|
||||
USBDevice_();
|
||||
bool configured();
|
||||
|
||||
void attach();
|
||||
void detach(); // Serial port goes down too...
|
||||
void poll();
|
||||
};
|
||||
extern USBDevice_ USBDevice;
|
||||
|
||||
//================================================================================
|
||||
//================================================================================
|
||||
// Serial over CDC (Serial1 is the physical port)
|
||||
|
||||
class Serial_ : public Stream
|
||||
{
|
||||
private:
|
||||
ring_buffer *_cdc_rx_buffer;
|
||||
public:
|
||||
void begin(uint16_t baud_count);
|
||||
void end(void);
|
||||
|
||||
virtual int available(void);
|
||||
virtual void accept(void);
|
||||
virtual int peek(void);
|
||||
virtual int read(void);
|
||||
virtual void flush(void);
|
||||
virtual size_t write(uint8_t);
|
||||
using Print::write; // pull in write(str) and write(buf, size) from Print
|
||||
operator bool();
|
||||
};
|
||||
extern Serial_ Serial;
|
||||
|
||||
//================================================================================
|
||||
//================================================================================
|
||||
// Mouse
|
||||
|
||||
#define MOUSE_LEFT 1
|
||||
#define MOUSE_RIGHT 2
|
||||
#define MOUSE_MIDDLE 4
|
||||
#define MOUSE_ALL (MOUSE_LEFT | MOUSE_RIGHT | MOUSE_MIDDLE)
|
||||
|
||||
class Mouse_
|
||||
{
|
||||
private:
|
||||
uint8_t _buttons;
|
||||
void buttons(uint8_t b);
|
||||
public:
|
||||
Mouse_(void);
|
||||
void begin(void);
|
||||
void end(void);
|
||||
void click(uint8_t b = MOUSE_LEFT);
|
||||
void move(signed char x, signed char y, signed char wheel = 0);
|
||||
void press(uint8_t b = MOUSE_LEFT); // press LEFT by default
|
||||
void release(uint8_t b = MOUSE_LEFT); // release LEFT by default
|
||||
bool isPressed(uint8_t b = MOUSE_LEFT); // check LEFT by default
|
||||
};
|
||||
extern Mouse_ Mouse;
|
||||
|
||||
//================================================================================
|
||||
//================================================================================
|
||||
// Keyboard
|
||||
|
||||
#define KEY_LEFT_CTRL 0x80
|
||||
#define KEY_LEFT_SHIFT 0x81
|
||||
#define KEY_LEFT_ALT 0x82
|
||||
#define KEY_LEFT_GUI 0x83
|
||||
#define KEY_RIGHT_CTRL 0x84
|
||||
#define KEY_RIGHT_SHIFT 0x85
|
||||
#define KEY_RIGHT_ALT 0x86
|
||||
#define KEY_RIGHT_GUI 0x87
|
||||
|
||||
#define KEY_UP_ARROW 0xDA
|
||||
#define KEY_DOWN_ARROW 0xD9
|
||||
#define KEY_LEFT_ARROW 0xD8
|
||||
#define KEY_RIGHT_ARROW 0xD7
|
||||
#define KEY_BACKSPACE 0xB2
|
||||
#define KEY_TAB 0xB3
|
||||
#define KEY_RETURN 0xB0
|
||||
#define KEY_ESC 0xB1
|
||||
#define KEY_INSERT 0xD1
|
||||
#define KEY_DELETE 0xD4
|
||||
#define KEY_PAGE_UP 0xD3
|
||||
#define KEY_PAGE_DOWN 0xD6
|
||||
#define KEY_HOME 0xD2
|
||||
#define KEY_END 0xD5
|
||||
#define KEY_CAPS_LOCK 0xC1
|
||||
#define KEY_F1 0xC2
|
||||
#define KEY_F2 0xC3
|
||||
#define KEY_F3 0xC4
|
||||
#define KEY_F4 0xC5
|
||||
#define KEY_F5 0xC6
|
||||
#define KEY_F6 0xC7
|
||||
#define KEY_F7 0xC8
|
||||
#define KEY_F8 0xC9
|
||||
#define KEY_F9 0xCA
|
||||
#define KEY_F10 0xCB
|
||||
#define KEY_F11 0xCC
|
||||
#define KEY_F12 0xCD
|
||||
|
||||
// Low level key report: up to 6 keys and shift, ctrl etc at once
|
||||
typedef struct
|
||||
{
|
||||
uint8_t modifiers;
|
||||
uint8_t reserved;
|
||||
uint8_t keys[6];
|
||||
} KeyReport;
|
||||
|
||||
class Keyboard_ : public Print
|
||||
{
|
||||
private:
|
||||
KeyReport _keyReport;
|
||||
void sendReport(KeyReport* keys);
|
||||
public:
|
||||
Keyboard_(void);
|
||||
void begin(void);
|
||||
void end(void);
|
||||
virtual size_t write(uint8_t k);
|
||||
virtual size_t press(uint8_t k);
|
||||
virtual size_t release(uint8_t k);
|
||||
virtual void releaseAll(void);
|
||||
};
|
||||
extern Keyboard_ Keyboard;
|
||||
|
||||
//================================================================================
|
||||
//================================================================================
|
||||
// Low level API
|
||||
|
||||
typedef struct
|
||||
{
|
||||
uint8_t bmRequestType;
|
||||
uint8_t bRequest;
|
||||
uint8_t wValueL;
|
||||
uint8_t wValueH;
|
||||
uint16_t wIndex;
|
||||
uint16_t wLength;
|
||||
} Setup;
|
||||
|
||||
//================================================================================
|
||||
//================================================================================
|
||||
// HID 'Driver'
|
||||
|
||||
int HID_GetInterface(uint8_t* interfaceNum);
|
||||
int HID_GetDescriptor(int i);
|
||||
bool HID_Setup(Setup& setup);
|
||||
void HID_SendReport(uint8_t id, const void* data, int len);
|
||||
|
||||
//================================================================================
|
||||
//================================================================================
|
||||
// MSC 'Driver'
|
||||
|
||||
int MSC_GetInterface(uint8_t* interfaceNum);
|
||||
int MSC_GetDescriptor(int i);
|
||||
bool MSC_Setup(Setup& setup);
|
||||
bool MSC_Data(uint8_t rx,uint8_t tx);
|
||||
|
||||
//================================================================================
|
||||
//================================================================================
|
||||
// CSC 'Driver'
|
||||
|
||||
int CDC_GetInterface(uint8_t* interfaceNum);
|
||||
int CDC_GetDescriptor(int i);
|
||||
bool CDC_Setup(Setup& setup);
|
||||
|
||||
//================================================================================
|
||||
//================================================================================
|
||||
|
||||
#define TRANSFER_PGM 0x80
|
||||
#define TRANSFER_RELEASE 0x40
|
||||
#define TRANSFER_ZERO 0x20
|
||||
|
||||
int USB_SendControl(uint8_t flags, const void* d, int len);
|
||||
int USB_RecvControl(void* d, int len);
|
||||
|
||||
uint8_t USB_Available(uint8_t ep);
|
||||
int USB_Send(uint8_t ep, const void* data, int len); // blocking
|
||||
int USB_Recv(uint8_t ep, void* data, int len); // non-blocking
|
||||
int USB_Recv(uint8_t ep); // non-blocking
|
||||
void USB_Flush(uint8_t ep);
|
||||
|
||||
#endif
|
||||
|
||||
#endif /* if defined(USBCON) */
|
||||
@ -0,0 +1,684 @@
|
||||
|
||||
|
||||
/* Copyright (c) 2010, Peter Barrett
|
||||
**
|
||||
** Permission to use, copy, modify, and/or distribute this software for
|
||||
** any purpose with or without fee is hereby granted, provided that the
|
||||
** above copyright notice and this permission notice appear in all copies.
|
||||
**
|
||||
** THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL
|
||||
** WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED
|
||||
** WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR
|
||||
** BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES
|
||||
** OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS,
|
||||
** WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION,
|
||||
** ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS
|
||||
** SOFTWARE.
|
||||
*/
|
||||
|
||||
#include "Platform.h"
|
||||
#include "USBAPI.h"
|
||||
#include "USBDesc.h"
|
||||
|
||||
#if defined(USBCON)
|
||||
|
||||
#define EP_TYPE_CONTROL 0x00
|
||||
#define EP_TYPE_BULK_IN 0x81
|
||||
#define EP_TYPE_BULK_OUT 0x80
|
||||
#define EP_TYPE_INTERRUPT_IN 0xC1
|
||||
#define EP_TYPE_INTERRUPT_OUT 0xC0
|
||||
#define EP_TYPE_ISOCHRONOUS_IN 0x41
|
||||
#define EP_TYPE_ISOCHRONOUS_OUT 0x40
|
||||
|
||||
/** Pulse generation counters to keep track of the number of milliseconds remaining for each pulse type */
|
||||
#define TX_RX_LED_PULSE_MS 100
|
||||
volatile u8 TxLEDPulse; /**< Milliseconds remaining for data Tx LED pulse */
|
||||
volatile u8 RxLEDPulse; /**< Milliseconds remaining for data Rx LED pulse */
|
||||
|
||||
//==================================================================
|
||||
//==================================================================
|
||||
|
||||
extern const u16 STRING_LANGUAGE[] PROGMEM;
|
||||
extern const u16 STRING_IPRODUCT[] PROGMEM;
|
||||
extern const u16 STRING_IMANUFACTURER[] PROGMEM;
|
||||
extern const DeviceDescriptor USB_DeviceDescriptor PROGMEM;
|
||||
extern const DeviceDescriptor USB_DeviceDescriptorA PROGMEM;
|
||||
|
||||
const u16 STRING_LANGUAGE[2] = {
|
||||
(3<<8) | (2+2),
|
||||
0x0409 // English
|
||||
};
|
||||
|
||||
const u16 STRING_IPRODUCT[17] = {
|
||||
(3<<8) | (2+2*16),
|
||||
#if USB_PID == 0x8036
|
||||
'A','r','d','u','i','n','o',' ','L','e','o','n','a','r','d','o'
|
||||
#elif USB_PID == 0x8037
|
||||
'A','r','d','u','i','n','o',' ','M','i','c','r','o',' ',' ',' '
|
||||
#elif USB_PID == 0x803C
|
||||
'A','r','d','u','i','n','o',' ','E','s','p','l','o','r','a',' '
|
||||
#elif USB_PID == 0x9208
|
||||
'L','i','l','y','P','a','d','U','S','B',' ',' ',' ',' ',' ',' '
|
||||
#else
|
||||
'U','S','B',' ','I','O',' ','B','o','a','r','d',' ',' ',' ',' '
|
||||
#endif
|
||||
};
|
||||
|
||||
const u16 STRING_IMANUFACTURER[12] = {
|
||||
(3<<8) | (2+2*11),
|
||||
#if USB_VID == 0x2341
|
||||
'A','r','d','u','i','n','o',' ','L','L','C'
|
||||
#elif USB_VID == 0x1b4f
|
||||
'S','p','a','r','k','F','u','n',' ',' ',' '
|
||||
#else
|
||||
'U','n','k','n','o','w','n',' ',' ',' ',' '
|
||||
#endif
|
||||
};
|
||||
|
||||
#ifdef CDC_ENABLED
|
||||
#define DEVICE_CLASS 0x02
|
||||
#else
|
||||
#define DEVICE_CLASS 0x00
|
||||
#endif
|
||||
|
||||
// DEVICE DESCRIPTOR
|
||||
const DeviceDescriptor USB_DeviceDescriptor =
|
||||
D_DEVICE(0x00,0x00,0x00,64,USB_VID,USB_PID,0x100,IMANUFACTURER,IPRODUCT,0,1);
|
||||
|
||||
const DeviceDescriptor USB_DeviceDescriptorA =
|
||||
D_DEVICE(DEVICE_CLASS,0x00,0x00,64,USB_VID,USB_PID,0x100,IMANUFACTURER,IPRODUCT,0,1);
|
||||
|
||||
//==================================================================
|
||||
//==================================================================
|
||||
|
||||
volatile u8 _usbConfiguration = 0;
|
||||
|
||||
static inline void WaitIN(void)
|
||||
{
|
||||
while (!(UEINTX & (1<<TXINI)));
|
||||
}
|
||||
|
||||
static inline void ClearIN(void)
|
||||
{
|
||||
UEINTX = ~(1<<TXINI);
|
||||
}
|
||||
|
||||
static inline void WaitOUT(void)
|
||||
{
|
||||
while (!(UEINTX & (1<<RXOUTI)))
|
||||
;
|
||||
}
|
||||
|
||||
static inline u8 WaitForINOrOUT()
|
||||
{
|
||||
while (!(UEINTX & ((1<<TXINI)|(1<<RXOUTI))))
|
||||
;
|
||||
return (UEINTX & (1<<RXOUTI)) == 0;
|
||||
}
|
||||
|
||||
static inline void ClearOUT(void)
|
||||
{
|
||||
UEINTX = ~(1<<RXOUTI);
|
||||
}
|
||||
|
||||
void Recv(volatile u8* data, u8 count)
|
||||
{
|
||||
while (count--)
|
||||
*data++ = UEDATX;
|
||||
|
||||
RXLED1; // light the RX LED
|
||||
RxLEDPulse = TX_RX_LED_PULSE_MS;
|
||||
}
|
||||
|
||||
static inline u8 Recv8()
|
||||
{
|
||||
RXLED1; // light the RX LED
|
||||
RxLEDPulse = TX_RX_LED_PULSE_MS;
|
||||
|
||||
return UEDATX;
|
||||
}
|
||||
|
||||
static inline void Send8(u8 d)
|
||||
{
|
||||
UEDATX = d;
|
||||
}
|
||||
|
||||
static inline void SetEP(u8 ep)
|
||||
{
|
||||
UENUM = ep;
|
||||
}
|
||||
|
||||
static inline u8 FifoByteCount()
|
||||
{
|
||||
return UEBCLX;
|
||||
}
|
||||
|
||||
static inline u8 ReceivedSetupInt()
|
||||
{
|
||||
return UEINTX & (1<<RXSTPI);
|
||||
}
|
||||
|
||||
static inline void ClearSetupInt()
|
||||
{
|
||||
UEINTX = ~((1<<RXSTPI) | (1<<RXOUTI) | (1<<TXINI));
|
||||
}
|
||||
|
||||
static inline void Stall()
|
||||
{
|
||||
UECONX = (1<<STALLRQ) | (1<<EPEN);
|
||||
}
|
||||
|
||||
static inline u8 ReadWriteAllowed()
|
||||
{
|
||||
return UEINTX & (1<<RWAL);
|
||||
}
|
||||
|
||||
static inline u8 Stalled()
|
||||
{
|
||||
return UEINTX & (1<<STALLEDI);
|
||||
}
|
||||
|
||||
static inline u8 FifoFree()
|
||||
{
|
||||
return UEINTX & (1<<FIFOCON);
|
||||
}
|
||||
|
||||
static inline void ReleaseRX()
|
||||
{
|
||||
UEINTX = 0x6B; // FIFOCON=0 NAKINI=1 RWAL=1 NAKOUTI=0 RXSTPI=1 RXOUTI=0 STALLEDI=1 TXINI=1
|
||||
}
|
||||
|
||||
static inline void ReleaseTX()
|
||||
{
|
||||
UEINTX = 0x3A; // FIFOCON=0 NAKINI=0 RWAL=1 NAKOUTI=1 RXSTPI=1 RXOUTI=0 STALLEDI=1 TXINI=0
|
||||
}
|
||||
|
||||
static inline u8 FrameNumber()
|
||||
{
|
||||
return UDFNUML;
|
||||
}
|
||||
|
||||
//==================================================================
|
||||
//==================================================================
|
||||
|
||||
u8 USBGetConfiguration(void)
|
||||
{
|
||||
return _usbConfiguration;
|
||||
}
|
||||
|
||||
#define USB_RECV_TIMEOUT
|
||||
class LockEP
|
||||
{
|
||||
u8 _sreg;
|
||||
public:
|
||||
LockEP(u8 ep) : _sreg(SREG)
|
||||
{
|
||||
cli();
|
||||
SetEP(ep & 7);
|
||||
}
|
||||
~LockEP()
|
||||
{
|
||||
SREG = _sreg;
|
||||
}
|
||||
};
|
||||
|
||||
// Number of bytes, assumes a rx endpoint
|
||||
u8 USB_Available(u8 ep)
|
||||
{
|
||||
LockEP lock(ep);
|
||||
return FifoByteCount();
|
||||
}
|
||||
|
||||
// Non Blocking receive
|
||||
// Return number of bytes read
|
||||
int USB_Recv(u8 ep, void* d, int len)
|
||||
{
|
||||
if (!_usbConfiguration || len < 0)
|
||||
return -1;
|
||||
|
||||
LockEP lock(ep);
|
||||
u8 n = FifoByteCount();
|
||||
len = min(n,len);
|
||||
n = len;
|
||||
u8* dst = (u8*)d;
|
||||
while (n--)
|
||||
*dst++ = Recv8();
|
||||
if (len && !FifoByteCount()) // release empty buffer
|
||||
ReleaseRX();
|
||||
|
||||
return len;
|
||||
}
|
||||
|
||||
// Recv 1 byte if ready
|
||||
int USB_Recv(u8 ep)
|
||||
{
|
||||
u8 c;
|
||||
if (USB_Recv(ep,&c,1) != 1)
|
||||
return -1;
|
||||
return c;
|
||||
}
|
||||
|
||||
// Space in send EP
|
||||
u8 USB_SendSpace(u8 ep)
|
||||
{
|
||||
LockEP lock(ep);
|
||||
if (!ReadWriteAllowed())
|
||||
return 0;
|
||||
return 64 - FifoByteCount();
|
||||
}
|
||||
|
||||
// Blocking Send of data to an endpoint
|
||||
int USB_Send(u8 ep, const void* d, int len)
|
||||
{
|
||||
if (!_usbConfiguration)
|
||||
return -1;
|
||||
|
||||
int r = len;
|
||||
const u8* data = (const u8*)d;
|
||||
u8 zero = ep & TRANSFER_ZERO;
|
||||
u8 timeout = 250; // 250ms timeout on send? TODO
|
||||
while (len)
|
||||
{
|
||||
u8 n = USB_SendSpace(ep);
|
||||
if (n == 0)
|
||||
{
|
||||
if (!(--timeout))
|
||||
return -1;
|
||||
delay(1);
|
||||
continue;
|
||||
}
|
||||
|
||||
if (n > len)
|
||||
n = len;
|
||||
len -= n;
|
||||
{
|
||||
LockEP lock(ep);
|
||||
if (ep & TRANSFER_ZERO)
|
||||
{
|
||||
while (n--)
|
||||
Send8(0);
|
||||
}
|
||||
else if (ep & TRANSFER_PGM)
|
||||
{
|
||||
while (n--)
|
||||
Send8(pgm_read_byte(data++));
|
||||
}
|
||||
else
|
||||
{
|
||||
while (n--)
|
||||
Send8(*data++);
|
||||
}
|
||||
if (!ReadWriteAllowed() || ((len == 0) && (ep & TRANSFER_RELEASE))) // Release full buffer
|
||||
ReleaseTX();
|
||||
}
|
||||
}
|
||||
TXLED1; // light the TX LED
|
||||
TxLEDPulse = TX_RX_LED_PULSE_MS;
|
||||
return r;
|
||||
}
|
||||
|
||||
extern const u8 _initEndpoints[] PROGMEM;
|
||||
const u8 _initEndpoints[] =
|
||||
{
|
||||
0,
|
||||
|
||||
#ifdef CDC_ENABLED
|
||||
EP_TYPE_INTERRUPT_IN, // CDC_ENDPOINT_ACM
|
||||
EP_TYPE_BULK_OUT, // CDC_ENDPOINT_OUT
|
||||
EP_TYPE_BULK_IN, // CDC_ENDPOINT_IN
|
||||
#endif
|
||||
|
||||
#ifdef HID_ENABLED
|
||||
EP_TYPE_INTERRUPT_IN // HID_ENDPOINT_INT
|
||||
#endif
|
||||
};
|
||||
|
||||
#define EP_SINGLE_64 0x32 // EP0
|
||||
#define EP_DOUBLE_64 0x36 // Other endpoints
|
||||
|
||||
static
|
||||
void InitEP(u8 index, u8 type, u8 size)
|
||||
{
|
||||
UENUM = index;
|
||||
UECONX = 1;
|
||||
UECFG0X = type;
|
||||
UECFG1X = size;
|
||||
}
|
||||
|
||||
static
|
||||
void InitEndpoints()
|
||||
{
|
||||
for (u8 i = 1; i < sizeof(_initEndpoints); i++)
|
||||
{
|
||||
UENUM = i;
|
||||
UECONX = 1;
|
||||
UECFG0X = pgm_read_byte(_initEndpoints+i);
|
||||
UECFG1X = EP_DOUBLE_64;
|
||||
}
|
||||
UERST = 0x7E; // And reset them
|
||||
UERST = 0;
|
||||
}
|
||||
|
||||
// Handle CLASS_INTERFACE requests
|
||||
static
|
||||
bool ClassInterfaceRequest(Setup& setup)
|
||||
{
|
||||
u8 i = setup.wIndex;
|
||||
|
||||
#ifdef CDC_ENABLED
|
||||
if (CDC_ACM_INTERFACE == i)
|
||||
return CDC_Setup(setup);
|
||||
#endif
|
||||
|
||||
#ifdef HID_ENABLED
|
||||
if (HID_INTERFACE == i)
|
||||
return HID_Setup(setup);
|
||||
#endif
|
||||
return false;
|
||||
}
|
||||
|
||||
int _cmark;
|
||||
int _cend;
|
||||
void InitControl(int end)
|
||||
{
|
||||
SetEP(0);
|
||||
_cmark = 0;
|
||||
_cend = end;
|
||||
}
|
||||
|
||||
static
|
||||
bool SendControl(u8 d)
|
||||
{
|
||||
if (_cmark < _cend)
|
||||
{
|
||||
if (!WaitForINOrOUT())
|
||||
return false;
|
||||
Send8(d);
|
||||
if (!((_cmark + 1) & 0x3F))
|
||||
ClearIN(); // Fifo is full, release this packet
|
||||
}
|
||||
_cmark++;
|
||||
return true;
|
||||
};
|
||||
|
||||
// Clipped by _cmark/_cend
|
||||
int USB_SendControl(u8 flags, const void* d, int len)
|
||||
{
|
||||
int sent = len;
|
||||
const u8* data = (const u8*)d;
|
||||
bool pgm = flags & TRANSFER_PGM;
|
||||
while (len--)
|
||||
{
|
||||
u8 c = pgm ? pgm_read_byte(data++) : *data++;
|
||||
if (!SendControl(c))
|
||||
return -1;
|
||||
}
|
||||
return sent;
|
||||
}
|
||||
|
||||
// Does not timeout or cross fifo boundaries
|
||||
// Will only work for transfers <= 64 bytes
|
||||
// TODO
|
||||
int USB_RecvControl(void* d, int len)
|
||||
{
|
||||
WaitOUT();
|
||||
Recv((u8*)d,len);
|
||||
ClearOUT();
|
||||
return len;
|
||||
}
|
||||
|
||||
int SendInterfaces()
|
||||
{
|
||||
int total = 0;
|
||||
u8 interfaces = 0;
|
||||
|
||||
#ifdef CDC_ENABLED
|
||||
total = CDC_GetInterface(&interfaces);
|
||||
#endif
|
||||
|
||||
#ifdef HID_ENABLED
|
||||
total += HID_GetInterface(&interfaces);
|
||||
#endif
|
||||
|
||||
return interfaces;
|
||||
}
|
||||
|
||||
// Construct a dynamic configuration descriptor
|
||||
// This really needs dynamic endpoint allocation etc
|
||||
// TODO
|
||||
static
|
||||
bool SendConfiguration(int maxlen)
|
||||
{
|
||||
// Count and measure interfaces
|
||||
InitControl(0);
|
||||
int interfaces = SendInterfaces();
|
||||
ConfigDescriptor config = D_CONFIG(_cmark + sizeof(ConfigDescriptor),interfaces);
|
||||
|
||||
// Now send them
|
||||
InitControl(maxlen);
|
||||
USB_SendControl(0,&config,sizeof(ConfigDescriptor));
|
||||
SendInterfaces();
|
||||
return true;
|
||||
}
|
||||
|
||||
u8 _cdcComposite = 0;
|
||||
|
||||
static
|
||||
bool SendDescriptor(Setup& setup)
|
||||
{
|
||||
u8 t = setup.wValueH;
|
||||
if (USB_CONFIGURATION_DESCRIPTOR_TYPE == t)
|
||||
return SendConfiguration(setup.wLength);
|
||||
|
||||
InitControl(setup.wLength);
|
||||
#ifdef HID_ENABLED
|
||||
if (HID_REPORT_DESCRIPTOR_TYPE == t)
|
||||
return HID_GetDescriptor(t);
|
||||
#endif
|
||||
|
||||
u8 desc_length = 0;
|
||||
const u8* desc_addr = 0;
|
||||
if (USB_DEVICE_DESCRIPTOR_TYPE == t)
|
||||
{
|
||||
if (setup.wLength == 8)
|
||||
_cdcComposite = 1;
|
||||
desc_addr = _cdcComposite ? (const u8*)&USB_DeviceDescriptorA : (const u8*)&USB_DeviceDescriptor;
|
||||
}
|
||||
else if (USB_STRING_DESCRIPTOR_TYPE == t)
|
||||
{
|
||||
if (setup.wValueL == 0)
|
||||
desc_addr = (const u8*)&STRING_LANGUAGE;
|
||||
else if (setup.wValueL == IPRODUCT)
|
||||
desc_addr = (const u8*)&STRING_IPRODUCT;
|
||||
else if (setup.wValueL == IMANUFACTURER)
|
||||
desc_addr = (const u8*)&STRING_IMANUFACTURER;
|
||||
else
|
||||
return false;
|
||||
}
|
||||
|
||||
if (desc_addr == 0)
|
||||
return false;
|
||||
if (desc_length == 0)
|
||||
desc_length = pgm_read_byte(desc_addr);
|
||||
|
||||
USB_SendControl(TRANSFER_PGM,desc_addr,desc_length);
|
||||
return true;
|
||||
}
|
||||
|
||||
// Endpoint 0 interrupt
|
||||
ISR(USB_COM_vect)
|
||||
{
|
||||
SetEP(0);
|
||||
if (!ReceivedSetupInt())
|
||||
return;
|
||||
|
||||
Setup setup;
|
||||
Recv((u8*)&setup,8);
|
||||
ClearSetupInt();
|
||||
|
||||
u8 requestType = setup.bmRequestType;
|
||||
if (requestType & REQUEST_DEVICETOHOST)
|
||||
WaitIN();
|
||||
else
|
||||
ClearIN();
|
||||
|
||||
bool ok = true;
|
||||
if (REQUEST_STANDARD == (requestType & REQUEST_TYPE))
|
||||
{
|
||||
// Standard Requests
|
||||
u8 r = setup.bRequest;
|
||||
if (GET_STATUS == r)
|
||||
{
|
||||
Send8(0); // TODO
|
||||
Send8(0);
|
||||
}
|
||||
else if (CLEAR_FEATURE == r)
|
||||
{
|
||||
}
|
||||
else if (SET_FEATURE == r)
|
||||
{
|
||||
}
|
||||
else if (SET_ADDRESS == r)
|
||||
{
|
||||
WaitIN();
|
||||
UDADDR = setup.wValueL | (1<<ADDEN);
|
||||
}
|
||||
else if (GET_DESCRIPTOR == r)
|
||||
{
|
||||
ok = SendDescriptor(setup);
|
||||
}
|
||||
else if (SET_DESCRIPTOR == r)
|
||||
{
|
||||
ok = false;
|
||||
}
|
||||
else if (GET_CONFIGURATION == r)
|
||||
{
|
||||
Send8(1);
|
||||
}
|
||||
else if (SET_CONFIGURATION == r)
|
||||
{
|
||||
if (REQUEST_DEVICE == (requestType & REQUEST_RECIPIENT))
|
||||
{
|
||||
InitEndpoints();
|
||||
_usbConfiguration = setup.wValueL;
|
||||
} else
|
||||
ok = false;
|
||||
}
|
||||
else if (GET_INTERFACE == r)
|
||||
{
|
||||
}
|
||||
else if (SET_INTERFACE == r)
|
||||
{
|
||||
}
|
||||
}
|
||||
else
|
||||
{
|
||||
InitControl(setup.wLength); // Max length of transfer
|
||||
ok = ClassInterfaceRequest(setup);
|
||||
}
|
||||
|
||||
if (ok)
|
||||
ClearIN();
|
||||
else
|
||||
{
|
||||
Stall();
|
||||
}
|
||||
}
|
||||
|
||||
void USB_Flush(u8 ep)
|
||||
{
|
||||
SetEP(ep);
|
||||
if (FifoByteCount())
|
||||
ReleaseTX();
|
||||
}
|
||||
|
||||
// General interrupt
|
||||
ISR(USB_GEN_vect)
|
||||
{
|
||||
u8 udint = UDINT;
|
||||
UDINT = 0;
|
||||
|
||||
// End of Reset
|
||||
if (udint & (1<<EORSTI))
|
||||
{
|
||||
InitEP(0,EP_TYPE_CONTROL,EP_SINGLE_64); // init ep0
|
||||
_usbConfiguration = 0; // not configured yet
|
||||
UEIENX = 1 << RXSTPE; // Enable interrupts for ep0
|
||||
}
|
||||
|
||||
// Start of Frame - happens every millisecond so we use it for TX and RX LED one-shot timing, too
|
||||
if (udint & (1<<SOFI))
|
||||
{
|
||||
#ifdef CDC_ENABLED
|
||||
USB_Flush(CDC_TX); // Send a tx frame if found
|
||||
if (USB_Available(CDC_RX)) // Handle received bytes (if any)
|
||||
Serial.accept();
|
||||
#endif
|
||||
|
||||
// check whether the one-shot period has elapsed. if so, turn off the LED
|
||||
if (TxLEDPulse && !(--TxLEDPulse))
|
||||
TXLED0;
|
||||
if (RxLEDPulse && !(--RxLEDPulse))
|
||||
RXLED0;
|
||||
}
|
||||
}
|
||||
|
||||
// VBUS or counting frames
|
||||
// Any frame counting?
|
||||
u8 USBConnected()
|
||||
{
|
||||
u8 f = UDFNUML;
|
||||
delay(3);
|
||||
return f != UDFNUML;
|
||||
}
|
||||
|
||||
//=======================================================================
|
||||
//=======================================================================
|
||||
|
||||
USBDevice_ USBDevice;
|
||||
|
||||
USBDevice_::USBDevice_()
|
||||
{
|
||||
}
|
||||
|
||||
void USBDevice_::attach()
|
||||
{
|
||||
_usbConfiguration = 0;
|
||||
UHWCON = 0x01; // power internal reg
|
||||
USBCON = (1<<USBE)|(1<<FRZCLK); // clock frozen, usb enabled
|
||||
#if F_CPU == 16000000UL
|
||||
PLLCSR = 0x12; // Need 16 MHz xtal
|
||||
#elif F_CPU == 8000000UL
|
||||
PLLCSR = 0x02; // Need 8 MHz xtal
|
||||
#endif
|
||||
while (!(PLLCSR & (1<<PLOCK))) // wait for lock pll
|
||||
;
|
||||
|
||||
// Some tests on specific versions of macosx (10.7.3), reported some
|
||||
// strange behaviuors when the board is reset using the serial
|
||||
// port touch at 1200 bps. This delay fixes this behaviour.
|
||||
delay(1);
|
||||
|
||||
USBCON = ((1<<USBE)|(1<<OTGPADE)); // start USB clock
|
||||
UDIEN = (1<<EORSTE)|(1<<SOFE); // Enable interrupts for EOR (End of Reset) and SOF (start of frame)
|
||||
UDCON = 0; // enable attach resistor
|
||||
|
||||
TX_RX_LED_INIT;
|
||||
}
|
||||
|
||||
void USBDevice_::detach()
|
||||
{
|
||||
}
|
||||
|
||||
// Check for interrupts
|
||||
// TODO: VBUS detection
|
||||
bool USBDevice_::configured()
|
||||
{
|
||||
return _usbConfiguration;
|
||||
}
|
||||
|
||||
void USBDevice_::poll()
|
||||
{
|
||||
}
|
||||
|
||||
#endif /* if defined(USBCON) */
|
||||
@ -0,0 +1,303 @@
|
||||
|
||||
// Copyright (c) 2010, Peter Barrett
|
||||
/*
|
||||
** Permission to use, copy, modify, and/or distribute this software for
|
||||
** any purpose with or without fee is hereby granted, provided that the
|
||||
** above copyright notice and this permission notice appear in all copies.
|
||||
**
|
||||
** THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL
|
||||
** WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED
|
||||
** WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR
|
||||
** BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES
|
||||
** OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS,
|
||||
** WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION,
|
||||
** ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS
|
||||
** SOFTWARE.
|
||||
*/
|
||||
|
||||
#ifndef __USBCORE_H__
|
||||
#define __USBCORE_H__
|
||||
|
||||
// Standard requests
|
||||
#define GET_STATUS 0
|
||||
#define CLEAR_FEATURE 1
|
||||
#define SET_FEATURE 3
|
||||
#define SET_ADDRESS 5
|
||||
#define GET_DESCRIPTOR 6
|
||||
#define SET_DESCRIPTOR 7
|
||||
#define GET_CONFIGURATION 8
|
||||
#define SET_CONFIGURATION 9
|
||||
#define GET_INTERFACE 10
|
||||
#define SET_INTERFACE 11
|
||||
|
||||
|
||||
// bmRequestType
|
||||
#define REQUEST_HOSTTODEVICE 0x00
|
||||
#define REQUEST_DEVICETOHOST 0x80
|
||||
#define REQUEST_DIRECTION 0x80
|
||||
|
||||
#define REQUEST_STANDARD 0x00
|
||||
#define REQUEST_CLASS 0x20
|
||||
#define REQUEST_VENDOR 0x40
|
||||
#define REQUEST_TYPE 0x60
|
||||
|
||||
#define REQUEST_DEVICE 0x00
|
||||
#define REQUEST_INTERFACE 0x01
|
||||
#define REQUEST_ENDPOINT 0x02
|
||||
#define REQUEST_OTHER 0x03
|
||||
#define REQUEST_RECIPIENT 0x03
|
||||
|
||||
#define REQUEST_DEVICETOHOST_CLASS_INTERFACE (REQUEST_DEVICETOHOST + REQUEST_CLASS + REQUEST_INTERFACE)
|
||||
#define REQUEST_HOSTTODEVICE_CLASS_INTERFACE (REQUEST_HOSTTODEVICE + REQUEST_CLASS + REQUEST_INTERFACE)
|
||||
|
||||
// Class requests
|
||||
|
||||
#define CDC_SET_LINE_CODING 0x20
|
||||
#define CDC_GET_LINE_CODING 0x21
|
||||
#define CDC_SET_CONTROL_LINE_STATE 0x22
|
||||
|
||||
#define MSC_RESET 0xFF
|
||||
#define MSC_GET_MAX_LUN 0xFE
|
||||
|
||||
#define HID_GET_REPORT 0x01
|
||||
#define HID_GET_IDLE 0x02
|
||||
#define HID_GET_PROTOCOL 0x03
|
||||
#define HID_SET_REPORT 0x09
|
||||
#define HID_SET_IDLE 0x0A
|
||||
#define HID_SET_PROTOCOL 0x0B
|
||||
|
||||
// Descriptors
|
||||
|
||||
#define USB_DEVICE_DESC_SIZE 18
|
||||
#define USB_CONFIGUARTION_DESC_SIZE 9
|
||||
#define USB_INTERFACE_DESC_SIZE 9
|
||||
#define USB_ENDPOINT_DESC_SIZE 7
|
||||
|
||||
#define USB_DEVICE_DESCRIPTOR_TYPE 1
|
||||
#define USB_CONFIGURATION_DESCRIPTOR_TYPE 2
|
||||
#define USB_STRING_DESCRIPTOR_TYPE 3
|
||||
#define USB_INTERFACE_DESCRIPTOR_TYPE 4
|
||||
#define USB_ENDPOINT_DESCRIPTOR_TYPE 5
|
||||
|
||||
#define USB_DEVICE_CLASS_COMMUNICATIONS 0x02
|
||||
#define USB_DEVICE_CLASS_HUMAN_INTERFACE 0x03
|
||||
#define USB_DEVICE_CLASS_STORAGE 0x08
|
||||
#define USB_DEVICE_CLASS_VENDOR_SPECIFIC 0xFF
|
||||
|
||||
#define USB_CONFIG_POWERED_MASK 0x40
|
||||
#define USB_CONFIG_BUS_POWERED 0x80
|
||||
#define USB_CONFIG_SELF_POWERED 0xC0
|
||||
#define USB_CONFIG_REMOTE_WAKEUP 0x20
|
||||
|
||||
// bMaxPower in Configuration Descriptor
|
||||
#define USB_CONFIG_POWER_MA(mA) ((mA)/2)
|
||||
|
||||
// bEndpointAddress in Endpoint Descriptor
|
||||
#define USB_ENDPOINT_DIRECTION_MASK 0x80
|
||||
#define USB_ENDPOINT_OUT(addr) ((addr) | 0x00)
|
||||
#define USB_ENDPOINT_IN(addr) ((addr) | 0x80)
|
||||
|
||||
#define USB_ENDPOINT_TYPE_MASK 0x03
|
||||
#define USB_ENDPOINT_TYPE_CONTROL 0x00
|
||||
#define USB_ENDPOINT_TYPE_ISOCHRONOUS 0x01
|
||||
#define USB_ENDPOINT_TYPE_BULK 0x02
|
||||
#define USB_ENDPOINT_TYPE_INTERRUPT 0x03
|
||||
|
||||
#define TOBYTES(x) ((x) & 0xFF),(((x) >> 8) & 0xFF)
|
||||
|
||||
#define CDC_V1_10 0x0110
|
||||
#define CDC_COMMUNICATION_INTERFACE_CLASS 0x02
|
||||
|
||||
#define CDC_CALL_MANAGEMENT 0x01
|
||||
#define CDC_ABSTRACT_CONTROL_MODEL 0x02
|
||||
#define CDC_HEADER 0x00
|
||||
#define CDC_ABSTRACT_CONTROL_MANAGEMENT 0x02
|
||||
#define CDC_UNION 0x06
|
||||
#define CDC_CS_INTERFACE 0x24
|
||||
#define CDC_CS_ENDPOINT 0x25
|
||||
#define CDC_DATA_INTERFACE_CLASS 0x0A
|
||||
|
||||
#define MSC_SUBCLASS_SCSI 0x06
|
||||
#define MSC_PROTOCOL_BULK_ONLY 0x50
|
||||
|
||||
#define HID_HID_DESCRIPTOR_TYPE 0x21
|
||||
#define HID_REPORT_DESCRIPTOR_TYPE 0x22
|
||||
#define HID_PHYSICAL_DESCRIPTOR_TYPE 0x23
|
||||
|
||||
|
||||
// Device
|
||||
typedef struct {
|
||||
u8 len; // 18
|
||||
u8 dtype; // 1 USB_DEVICE_DESCRIPTOR_TYPE
|
||||
u16 usbVersion; // 0x200
|
||||
u8 deviceClass;
|
||||
u8 deviceSubClass;
|
||||
u8 deviceProtocol;
|
||||
u8 packetSize0; // Packet 0
|
||||
u16 idVendor;
|
||||
u16 idProduct;
|
||||
u16 deviceVersion; // 0x100
|
||||
u8 iManufacturer;
|
||||
u8 iProduct;
|
||||
u8 iSerialNumber;
|
||||
u8 bNumConfigurations;
|
||||
} DeviceDescriptor;
|
||||
|
||||
// Config
|
||||
typedef struct {
|
||||
u8 len; // 9
|
||||
u8 dtype; // 2
|
||||
u16 clen; // total length
|
||||
u8 numInterfaces;
|
||||
u8 config;
|
||||
u8 iconfig;
|
||||
u8 attributes;
|
||||
u8 maxPower;
|
||||
} ConfigDescriptor;
|
||||
|
||||
// String
|
||||
|
||||
// Interface
|
||||
typedef struct
|
||||
{
|
||||
u8 len; // 9
|
||||
u8 dtype; // 4
|
||||
u8 number;
|
||||
u8 alternate;
|
||||
u8 numEndpoints;
|
||||
u8 interfaceClass;
|
||||
u8 interfaceSubClass;
|
||||
u8 protocol;
|
||||
u8 iInterface;
|
||||
} InterfaceDescriptor;
|
||||
|
||||
// Endpoint
|
||||
typedef struct
|
||||
{
|
||||
u8 len; // 7
|
||||
u8 dtype; // 5
|
||||
u8 addr;
|
||||
u8 attr;
|
||||
u16 packetSize;
|
||||
u8 interval;
|
||||
} EndpointDescriptor;
|
||||
|
||||
// Interface Association Descriptor
|
||||
// Used to bind 2 interfaces together in CDC compostite device
|
||||
typedef struct
|
||||
{
|
||||
u8 len; // 8
|
||||
u8 dtype; // 11
|
||||
u8 firstInterface;
|
||||
u8 interfaceCount;
|
||||
u8 functionClass;
|
||||
u8 funtionSubClass;
|
||||
u8 functionProtocol;
|
||||
u8 iInterface;
|
||||
} IADDescriptor;
|
||||
|
||||
// CDC CS interface descriptor
|
||||
typedef struct
|
||||
{
|
||||
u8 len; // 5
|
||||
u8 dtype; // 0x24
|
||||
u8 subtype;
|
||||
u8 d0;
|
||||
u8 d1;
|
||||
} CDCCSInterfaceDescriptor;
|
||||
|
||||
typedef struct
|
||||
{
|
||||
u8 len; // 4
|
||||
u8 dtype; // 0x24
|
||||
u8 subtype;
|
||||
u8 d0;
|
||||
} CDCCSInterfaceDescriptor4;
|
||||
|
||||
typedef struct
|
||||
{
|
||||
u8 len;
|
||||
u8 dtype; // 0x24
|
||||
u8 subtype; // 1
|
||||
u8 bmCapabilities;
|
||||
u8 bDataInterface;
|
||||
} CMFunctionalDescriptor;
|
||||
|
||||
typedef struct
|
||||
{
|
||||
u8 len;
|
||||
u8 dtype; // 0x24
|
||||
u8 subtype; // 1
|
||||
u8 bmCapabilities;
|
||||
} ACMFunctionalDescriptor;
|
||||
|
||||
typedef struct
|
||||
{
|
||||
// IAD
|
||||
IADDescriptor iad; // Only needed on compound device
|
||||
|
||||
// Control
|
||||
InterfaceDescriptor cif; //
|
||||
CDCCSInterfaceDescriptor header;
|
||||
CMFunctionalDescriptor callManagement; // Call Management
|
||||
ACMFunctionalDescriptor controlManagement; // ACM
|
||||
CDCCSInterfaceDescriptor functionalDescriptor; // CDC_UNION
|
||||
EndpointDescriptor cifin;
|
||||
|
||||
// Data
|
||||
InterfaceDescriptor dif;
|
||||
EndpointDescriptor in;
|
||||
EndpointDescriptor out;
|
||||
} CDCDescriptor;
|
||||
|
||||
typedef struct
|
||||
{
|
||||
InterfaceDescriptor msc;
|
||||
EndpointDescriptor in;
|
||||
EndpointDescriptor out;
|
||||
} MSCDescriptor;
|
||||
|
||||
typedef struct
|
||||
{
|
||||
u8 len; // 9
|
||||
u8 dtype; // 0x21
|
||||
u8 addr;
|
||||
u8 versionL; // 0x101
|
||||
u8 versionH; // 0x101
|
||||
u8 country;
|
||||
u8 desctype; // 0x22 report
|
||||
u8 descLenL;
|
||||
u8 descLenH;
|
||||
} HIDDescDescriptor;
|
||||
|
||||
typedef struct
|
||||
{
|
||||
InterfaceDescriptor hid;
|
||||
HIDDescDescriptor desc;
|
||||
EndpointDescriptor in;
|
||||
} HIDDescriptor;
|
||||
|
||||
|
||||
#define D_DEVICE(_class,_subClass,_proto,_packetSize0,_vid,_pid,_version,_im,_ip,_is,_configs) \
|
||||
{ 18, 1, 0x200, _class,_subClass,_proto,_packetSize0,_vid,_pid,_version,_im,_ip,_is,_configs }
|
||||
|
||||
#define D_CONFIG(_totalLength,_interfaces) \
|
||||
{ 9, 2, _totalLength,_interfaces, 1, 0, USB_CONFIG_BUS_POWERED, USB_CONFIG_POWER_MA(500) }
|
||||
|
||||
#define D_INTERFACE(_n,_numEndpoints,_class,_subClass,_protocol) \
|
||||
{ 9, 4, _n, 0, _numEndpoints, _class,_subClass, _protocol, 0 }
|
||||
|
||||
#define D_ENDPOINT(_addr,_attr,_packetSize, _interval) \
|
||||
{ 7, 5, _addr,_attr,_packetSize, _interval }
|
||||
|
||||
#define D_IAD(_firstInterface, _count, _class, _subClass, _protocol) \
|
||||
{ 8, 11, _firstInterface, _count, _class, _subClass, _protocol, 0 }
|
||||
|
||||
#define D_HIDREPORT(_descriptorLength) \
|
||||
{ 9, 0x21, 0x1, 0x1, 0, 1, 0x22, _descriptorLength, 0 }
|
||||
|
||||
#define D_CDCCS(_subtype,_d0,_d1) { 5, 0x24, _subtype, _d0, _d1 }
|
||||
#define D_CDCCS4(_subtype,_d0) { 4, 0x24, _subtype, _d0 }
|
||||
|
||||
|
||||
#endif
|
||||
@ -0,0 +1,63 @@
|
||||
|
||||
|
||||
/* Copyright (c) 2011, Peter Barrett
|
||||
**
|
||||
** Permission to use, copy, modify, and/or distribute this software for
|
||||
** any purpose with or without fee is hereby granted, provided that the
|
||||
** above copyright notice and this permission notice appear in all copies.
|
||||
**
|
||||
** THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL
|
||||
** WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED
|
||||
** WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR
|
||||
** BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES
|
||||
** OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS,
|
||||
** WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION,
|
||||
** ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS
|
||||
** SOFTWARE.
|
||||
*/
|
||||
|
||||
#define CDC_ENABLED
|
||||
#define HID_ENABLED
|
||||
|
||||
|
||||
#ifdef CDC_ENABLED
|
||||
#define CDC_INTERFACE_COUNT 2
|
||||
#define CDC_ENPOINT_COUNT 3
|
||||
#else
|
||||
#define CDC_INTERFACE_COUNT 0
|
||||
#define CDC_ENPOINT_COUNT 0
|
||||
#endif
|
||||
|
||||
#ifdef HID_ENABLED
|
||||
#define HID_INTERFACE_COUNT 1
|
||||
#define HID_ENPOINT_COUNT 1
|
||||
#else
|
||||
#define HID_INTERFACE_COUNT 0
|
||||
#define HID_ENPOINT_COUNT 0
|
||||
#endif
|
||||
|
||||
#define CDC_ACM_INTERFACE 0 // CDC ACM
|
||||
#define CDC_DATA_INTERFACE 1 // CDC Data
|
||||
#define CDC_FIRST_ENDPOINT 1
|
||||
#define CDC_ENDPOINT_ACM (CDC_FIRST_ENDPOINT) // CDC First
|
||||
#define CDC_ENDPOINT_OUT (CDC_FIRST_ENDPOINT+1)
|
||||
#define CDC_ENDPOINT_IN (CDC_FIRST_ENDPOINT+2)
|
||||
|
||||
#define HID_INTERFACE (CDC_ACM_INTERFACE + CDC_INTERFACE_COUNT) // HID Interface
|
||||
#define HID_FIRST_ENDPOINT (CDC_FIRST_ENDPOINT + CDC_ENPOINT_COUNT)
|
||||
#define HID_ENDPOINT_INT (HID_FIRST_ENDPOINT)
|
||||
|
||||
#define INTERFACE_COUNT (MSC_INTERFACE + MSC_INTERFACE_COUNT)
|
||||
|
||||
#ifdef CDC_ENABLED
|
||||
#define CDC_RX CDC_ENDPOINT_OUT
|
||||
#define CDC_TX CDC_ENDPOINT_IN
|
||||
#endif
|
||||
|
||||
#ifdef HID_ENABLED
|
||||
#define HID_TX HID_ENDPOINT_INT
|
||||
#endif
|
||||
|
||||
#define IMANUFACTURER 1
|
||||
#define IPRODUCT 2
|
||||
|
||||
@ -0,0 +1,88 @@
|
||||
/*
|
||||
* Udp.cpp: Library to send/receive UDP packets.
|
||||
*
|
||||
* NOTE: UDP is fast, but has some important limitations (thanks to Warren Gray for mentioning these)
|
||||
* 1) UDP does not guarantee the order in which assembled UDP packets are received. This
|
||||
* might not happen often in practice, but in larger network topologies, a UDP
|
||||
* packet can be received out of sequence.
|
||||
* 2) UDP does not guard against lost packets - so packets *can* disappear without the sender being
|
||||
* aware of it. Again, this may not be a concern in practice on small local networks.
|
||||
* For more information, see http://www.cafeaulait.org/course/week12/35.html
|
||||
*
|
||||
* MIT License:
|
||||
* Copyright (c) 2008 Bjoern Hartmann
|
||||
* Permission is hereby granted, free of charge, to any person obtaining a copy
|
||||
* of this software and associated documentation files (the "Software"), to deal
|
||||
* in the Software without restriction, including without limitation the rights
|
||||
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
||||
* copies of the Software, and to permit persons to whom the Software is
|
||||
* furnished to do so, subject to the following conditions:
|
||||
*
|
||||
* The above copyright notice and this permission notice shall be included in
|
||||
* all copies or substantial portions of the Software.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
||||
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
||||
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
|
||||
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
||||
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
||||
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
|
||||
* THE SOFTWARE.
|
||||
*
|
||||
* bjoern@cs.stanford.edu 12/30/2008
|
||||
*/
|
||||
|
||||
#ifndef udp_h
|
||||
#define udp_h
|
||||
|
||||
#include <Stream.h>
|
||||
#include <IPAddress.h>
|
||||
|
||||
class UDP : public Stream {
|
||||
|
||||
public:
|
||||
virtual uint8_t begin(uint16_t) =0; // initialize, start listening on specified port. Returns 1 if successful, 0 if there are no sockets available to use
|
||||
virtual void stop() =0; // Finish with the UDP socket
|
||||
|
||||
// Sending UDP packets
|
||||
|
||||
// Start building up a packet to send to the remote host specific in ip and port
|
||||
// Returns 1 if successful, 0 if there was a problem with the supplied IP address or port
|
||||
virtual int beginPacket(IPAddress ip, uint16_t port) =0;
|
||||
// Start building up a packet to send to the remote host specific in host and port
|
||||
// Returns 1 if successful, 0 if there was a problem resolving the hostname or port
|
||||
virtual int beginPacket(const char *host, uint16_t port) =0;
|
||||
// Finish off this packet and send it
|
||||
// Returns 1 if the packet was sent successfully, 0 if there was an error
|
||||
virtual int endPacket() =0;
|
||||
// Write a single byte into the packet
|
||||
virtual size_t write(uint8_t) =0;
|
||||
// Write size bytes from buffer into the packet
|
||||
virtual size_t write(const uint8_t *buffer, size_t size) =0;
|
||||
|
||||
// Start processing the next available incoming packet
|
||||
// Returns the size of the packet in bytes, or 0 if no packets are available
|
||||
virtual int parsePacket() =0;
|
||||
// Number of bytes remaining in the current packet
|
||||
virtual int available() =0;
|
||||
// Read a single byte from the current packet
|
||||
virtual int read() =0;
|
||||
// Read up to len bytes from the current packet and place them into buffer
|
||||
// Returns the number of bytes read, or 0 if none are available
|
||||
virtual int read(unsigned char* buffer, size_t len) =0;
|
||||
// Read up to len characters from the current packet and place them into buffer
|
||||
// Returns the number of characters read, or 0 if none are available
|
||||
virtual int read(char* buffer, size_t len) =0;
|
||||
// Return the next byte from the current packet without moving on to the next byte
|
||||
virtual int peek() =0;
|
||||
virtual void flush() =0; // Finish reading the current packet
|
||||
|
||||
// Return the IP address of the host who sent the current incoming packet
|
||||
virtual IPAddress remoteIP() =0;
|
||||
// Return the port of the host who sent the current incoming packet
|
||||
virtual uint16_t remotePort() =0;
|
||||
protected:
|
||||
uint8_t* rawIPAddress(IPAddress& addr) { return addr.raw_address(); };
|
||||
};
|
||||
|
||||
#endif
|
||||
@ -0,0 +1,168 @@
|
||||
/*
|
||||
WCharacter.h - Character utility functions for Wiring & Arduino
|
||||
Copyright (c) 2010 Hernando Barragan. All right reserved.
|
||||
|
||||
This library is free software; you can redistribute it and/or
|
||||
modify it under the terms of the GNU Lesser General Public
|
||||
License as published by the Free Software Foundation; either
|
||||
version 2.1 of the License, or (at your option) any later version.
|
||||
|
||||
This library is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
||||
Lesser General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU Lesser General Public
|
||||
License along with this library; if not, write to the Free Software
|
||||
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||
*/
|
||||
|
||||
#ifndef Character_h
|
||||
#define Character_h
|
||||
|
||||
#include <ctype.h>
|
||||
|
||||
// WCharacter.h prototypes
|
||||
inline boolean isAlphaNumeric(int c) __attribute__((always_inline));
|
||||
inline boolean isAlpha(int c) __attribute__((always_inline));
|
||||
inline boolean isAscii(int c) __attribute__((always_inline));
|
||||
inline boolean isWhitespace(int c) __attribute__((always_inline));
|
||||
inline boolean isControl(int c) __attribute__((always_inline));
|
||||
inline boolean isDigit(int c) __attribute__((always_inline));
|
||||
inline boolean isGraph(int c) __attribute__((always_inline));
|
||||
inline boolean isLowerCase(int c) __attribute__((always_inline));
|
||||
inline boolean isPrintable(int c) __attribute__((always_inline));
|
||||
inline boolean isPunct(int c) __attribute__((always_inline));
|
||||
inline boolean isSpace(int c) __attribute__((always_inline));
|
||||
inline boolean isUpperCase(int c) __attribute__((always_inline));
|
||||
inline boolean isHexadecimalDigit(int c) __attribute__((always_inline));
|
||||
inline int toAscii(int c) __attribute__((always_inline));
|
||||
inline int toLowerCase(int c) __attribute__((always_inline));
|
||||
inline int toUpperCase(int c)__attribute__((always_inline));
|
||||
|
||||
|
||||
// Checks for an alphanumeric character.
|
||||
// It is equivalent to (isalpha(c) || isdigit(c)).
|
||||
inline boolean isAlphaNumeric(int c)
|
||||
{
|
||||
return ( isalnum(c) == 0 ? false : true);
|
||||
}
|
||||
|
||||
|
||||
// Checks for an alphabetic character.
|
||||
// It is equivalent to (isupper(c) || islower(c)).
|
||||
inline boolean isAlpha(int c)
|
||||
{
|
||||
return ( isalpha(c) == 0 ? false : true);
|
||||
}
|
||||
|
||||
|
||||
// Checks whether c is a 7-bit unsigned char value
|
||||
// that fits into the ASCII character set.
|
||||
inline boolean isAscii(int c)
|
||||
{
|
||||
return ( isascii (c) == 0 ? false : true);
|
||||
}
|
||||
|
||||
|
||||
// Checks for a blank character, that is, a space or a tab.
|
||||
inline boolean isWhitespace(int c)
|
||||
{
|
||||
return ( isblank (c) == 0 ? false : true);
|
||||
}
|
||||
|
||||
|
||||
// Checks for a control character.
|
||||
inline boolean isControl(int c)
|
||||
{
|
||||
return ( iscntrl (c) == 0 ? false : true);
|
||||
}
|
||||
|
||||
|
||||
// Checks for a digit (0 through 9).
|
||||
inline boolean isDigit(int c)
|
||||
{
|
||||
return ( isdigit (c) == 0 ? false : true);
|
||||
}
|
||||
|
||||
|
||||
// Checks for any printable character except space.
|
||||
inline boolean isGraph(int c)
|
||||
{
|
||||
return ( isgraph (c) == 0 ? false : true);
|
||||
}
|
||||
|
||||
|
||||
// Checks for a lower-case character.
|
||||
inline boolean isLowerCase(int c)
|
||||
{
|
||||
return (islower (c) == 0 ? false : true);
|
||||
}
|
||||
|
||||
|
||||
// Checks for any printable character including space.
|
||||
inline boolean isPrintable(int c)
|
||||
{
|
||||
return ( isprint (c) == 0 ? false : true);
|
||||
}
|
||||
|
||||
|
||||
// Checks for any printable character which is not a space
|
||||
// or an alphanumeric character.
|
||||
inline boolean isPunct(int c)
|
||||
{
|
||||
return ( ispunct (c) == 0 ? false : true);
|
||||
}
|
||||
|
||||
|
||||
// Checks for white-space characters. For the avr-libc library,
|
||||
// these are: space, formfeed ('\f'), newline ('\n'), carriage
|
||||
// return ('\r'), horizontal tab ('\t'), and vertical tab ('\v').
|
||||
inline boolean isSpace(int c)
|
||||
{
|
||||
return ( isspace (c) == 0 ? false : true);
|
||||
}
|
||||
|
||||
|
||||
// Checks for an uppercase letter.
|
||||
inline boolean isUpperCase(int c)
|
||||
{
|
||||
return ( isupper (c) == 0 ? false : true);
|
||||
}
|
||||
|
||||
|
||||
// Checks for a hexadecimal digits, i.e. one of 0 1 2 3 4 5 6 7
|
||||
// 8 9 a b c d e f A B C D E F.
|
||||
inline boolean isHexadecimalDigit(int c)
|
||||
{
|
||||
return ( isxdigit (c) == 0 ? false : true);
|
||||
}
|
||||
|
||||
|
||||
// Converts c to a 7-bit unsigned char value that fits into the
|
||||
// ASCII character set, by clearing the high-order bits.
|
||||
inline int toAscii(int c)
|
||||
{
|
||||
return toascii (c);
|
||||
}
|
||||
|
||||
|
||||
// Warning:
|
||||
// Many people will be unhappy if you use this function.
|
||||
// This function will convert accented letters into random
|
||||
// characters.
|
||||
|
||||
// Converts the letter c to lower case, if possible.
|
||||
inline int toLowerCase(int c)
|
||||
{
|
||||
return tolower (c);
|
||||
}
|
||||
|
||||
|
||||
// Converts the letter c to upper case, if possible.
|
||||
inline int toUpperCase(int c)
|
||||
{
|
||||
return toupper (c);
|
||||
}
|
||||
|
||||
#endif
|
||||
@ -0,0 +1,322 @@
|
||||
/* -*- mode: jde; c-basic-offset: 2; indent-tabs-mode: nil -*- */
|
||||
|
||||
/*
|
||||
Part of the Wiring project - http://wiring.uniandes.edu.co
|
||||
|
||||
Copyright (c) 2004-05 Hernando Barragan
|
||||
|
||||
This library is free software; you can redistribute it and/or
|
||||
modify it under the terms of the GNU Lesser General Public
|
||||
License as published by the Free Software Foundation; either
|
||||
version 2.1 of the License, or (at your option) any later version.
|
||||
|
||||
This library is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
||||
Lesser General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU Lesser General
|
||||
Public License along with this library; if not, write to the
|
||||
Free Software Foundation, Inc., 59 Temple Place, Suite 330,
|
||||
Boston, MA 02111-1307 USA
|
||||
|
||||
Modified 24 November 2006 by David A. Mellis
|
||||
Modified 1 August 2010 by Mark Sproul
|
||||
*/
|
||||
|
||||
#include <inttypes.h>
|
||||
#include <avr/io.h>
|
||||
#include <avr/interrupt.h>
|
||||
#include <avr/pgmspace.h>
|
||||
#include <stdio.h>
|
||||
|
||||
#include "wiring_private.h"
|
||||
|
||||
static volatile voidFuncPtr intFunc[EXTERNAL_NUM_INTERRUPTS];
|
||||
// volatile static voidFuncPtr twiIntFunc;
|
||||
|
||||
void attachInterrupt(uint8_t interruptNum, void (*userFunc)(void), int mode) {
|
||||
if(interruptNum < EXTERNAL_NUM_INTERRUPTS) {
|
||||
intFunc[interruptNum] = userFunc;
|
||||
|
||||
// Configure the interrupt mode (trigger on low input, any change, rising
|
||||
// edge, or falling edge). The mode constants were chosen to correspond
|
||||
// to the configuration bits in the hardware register, so we simply shift
|
||||
// the mode into place.
|
||||
|
||||
// Enable the interrupt.
|
||||
|
||||
switch (interruptNum) {
|
||||
#if defined(__AVR_ATmega32U4__)
|
||||
// I hate doing this, but the register assignment differs between the 1280/2560
|
||||
// and the 32U4. Since avrlib defines registers PCMSK1 and PCMSK2 that aren't
|
||||
// even present on the 32U4 this is the only way to distinguish between them.
|
||||
case 0:
|
||||
EICRA = (EICRA & ~((1<<ISC00) | (1<<ISC01))) | (mode << ISC00);
|
||||
EIMSK |= (1<<INT0);
|
||||
break;
|
||||
case 1:
|
||||
EICRA = (EICRA & ~((1<<ISC10) | (1<<ISC11))) | (mode << ISC10);
|
||||
EIMSK |= (1<<INT1);
|
||||
break;
|
||||
case 2:
|
||||
EICRA = (EICRA & ~((1<<ISC20) | (1<<ISC21))) | (mode << ISC20);
|
||||
EIMSK |= (1<<INT2);
|
||||
break;
|
||||
case 3:
|
||||
EICRA = (EICRA & ~((1<<ISC30) | (1<<ISC31))) | (mode << ISC30);
|
||||
EIMSK |= (1<<INT3);
|
||||
break;
|
||||
#elif defined(EICRA) && defined(EICRB) && defined(EIMSK)
|
||||
case 2:
|
||||
EICRA = (EICRA & ~((1 << ISC00) | (1 << ISC01))) | (mode << ISC00);
|
||||
EIMSK |= (1 << INT0);
|
||||
break;
|
||||
case 3:
|
||||
EICRA = (EICRA & ~((1 << ISC10) | (1 << ISC11))) | (mode << ISC10);
|
||||
EIMSK |= (1 << INT1);
|
||||
break;
|
||||
case 4:
|
||||
EICRA = (EICRA & ~((1 << ISC20) | (1 << ISC21))) | (mode << ISC20);
|
||||
EIMSK |= (1 << INT2);
|
||||
break;
|
||||
case 5:
|
||||
EICRA = (EICRA & ~((1 << ISC30) | (1 << ISC31))) | (mode << ISC30);
|
||||
EIMSK |= (1 << INT3);
|
||||
break;
|
||||
case 0:
|
||||
EICRB = (EICRB & ~((1 << ISC40) | (1 << ISC41))) | (mode << ISC40);
|
||||
EIMSK |= (1 << INT4);
|
||||
break;
|
||||
case 1:
|
||||
EICRB = (EICRB & ~((1 << ISC50) | (1 << ISC51))) | (mode << ISC50);
|
||||
EIMSK |= (1 << INT5);
|
||||
break;
|
||||
case 6:
|
||||
EICRB = (EICRB & ~((1 << ISC60) | (1 << ISC61))) | (mode << ISC60);
|
||||
EIMSK |= (1 << INT6);
|
||||
break;
|
||||
case 7:
|
||||
EICRB = (EICRB & ~((1 << ISC70) | (1 << ISC71))) | (mode << ISC70);
|
||||
EIMSK |= (1 << INT7);
|
||||
break;
|
||||
#else
|
||||
case 0:
|
||||
#if defined(EICRA) && defined(ISC00) && defined(EIMSK)
|
||||
EICRA = (EICRA & ~((1 << ISC00) | (1 << ISC01))) | (mode << ISC00);
|
||||
EIMSK |= (1 << INT0);
|
||||
#elif defined(MCUCR) && defined(ISC00) && defined(GICR)
|
||||
MCUCR = (MCUCR & ~((1 << ISC00) | (1 << ISC01))) | (mode << ISC00);
|
||||
GICR |= (1 << INT0);
|
||||
#elif defined(MCUCR) && defined(ISC00) && defined(GIMSK)
|
||||
MCUCR = (MCUCR & ~((1 << ISC00) | (1 << ISC01))) | (mode << ISC00);
|
||||
GIMSK |= (1 << INT0);
|
||||
#else
|
||||
#error attachInterrupt not finished for this CPU (case 0)
|
||||
#endif
|
||||
break;
|
||||
|
||||
case 1:
|
||||
#if defined(EICRA) && defined(ISC10) && defined(ISC11) && defined(EIMSK)
|
||||
EICRA = (EICRA & ~((1 << ISC10) | (1 << ISC11))) | (mode << ISC10);
|
||||
EIMSK |= (1 << INT1);
|
||||
#elif defined(MCUCR) && defined(ISC10) && defined(ISC11) && defined(GICR)
|
||||
MCUCR = (MCUCR & ~((1 << ISC10) | (1 << ISC11))) | (mode << ISC10);
|
||||
GICR |= (1 << INT1);
|
||||
#elif defined(MCUCR) && defined(ISC10) && defined(GIMSK) && defined(GIMSK)
|
||||
MCUCR = (MCUCR & ~((1 << ISC10) | (1 << ISC11))) | (mode << ISC10);
|
||||
GIMSK |= (1 << INT1);
|
||||
#else
|
||||
#warning attachInterrupt may need some more work for this cpu (case 1)
|
||||
#endif
|
||||
break;
|
||||
|
||||
case 2:
|
||||
#if defined(EICRA) && defined(ISC20) && defined(ISC21) && defined(EIMSK)
|
||||
EICRA = (EICRA & ~((1 << ISC20) | (1 << ISC21))) | (mode << ISC20);
|
||||
EIMSK |= (1 << INT2);
|
||||
#elif defined(MCUCR) && defined(ISC20) && defined(ISC21) && defined(GICR)
|
||||
MCUCR = (MCUCR & ~((1 << ISC20) | (1 << ISC21))) | (mode << ISC20);
|
||||
GICR |= (1 << INT2);
|
||||
#elif defined(MCUCR) && defined(ISC20) && defined(GIMSK) && defined(GIMSK)
|
||||
MCUCR = (MCUCR & ~((1 << ISC20) | (1 << ISC21))) | (mode << ISC20);
|
||||
GIMSK |= (1 << INT2);
|
||||
#endif
|
||||
break;
|
||||
#endif
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
void detachInterrupt(uint8_t interruptNum) {
|
||||
if(interruptNum < EXTERNAL_NUM_INTERRUPTS) {
|
||||
// Disable the interrupt. (We can't assume that interruptNum is equal
|
||||
// to the number of the EIMSK bit to clear, as this isn't true on the
|
||||
// ATmega8. There, INT0 is 6 and INT1 is 7.)
|
||||
switch (interruptNum) {
|
||||
#if defined(__AVR_ATmega32U4__)
|
||||
case 0:
|
||||
EIMSK &= ~(1<<INT0);
|
||||
break;
|
||||
case 1:
|
||||
EIMSK &= ~(1<<INT1);
|
||||
break;
|
||||
case 2:
|
||||
EIMSK &= ~(1<<INT2);
|
||||
break;
|
||||
case 3:
|
||||
EIMSK &= ~(1<<INT3);
|
||||
break;
|
||||
#elif defined(EICRA) && defined(EICRB) && defined(EIMSK)
|
||||
case 2:
|
||||
EIMSK &= ~(1 << INT0);
|
||||
break;
|
||||
case 3:
|
||||
EIMSK &= ~(1 << INT1);
|
||||
break;
|
||||
case 4:
|
||||
EIMSK &= ~(1 << INT2);
|
||||
break;
|
||||
case 5:
|
||||
EIMSK &= ~(1 << INT3);
|
||||
break;
|
||||
case 0:
|
||||
EIMSK &= ~(1 << INT4);
|
||||
break;
|
||||
case 1:
|
||||
EIMSK &= ~(1 << INT5);
|
||||
break;
|
||||
case 6:
|
||||
EIMSK &= ~(1 << INT6);
|
||||
break;
|
||||
case 7:
|
||||
EIMSK &= ~(1 << INT7);
|
||||
break;
|
||||
#else
|
||||
case 0:
|
||||
#if defined(EIMSK) && defined(INT0)
|
||||
EIMSK &= ~(1 << INT0);
|
||||
#elif defined(GICR) && defined(ISC00)
|
||||
GICR &= ~(1 << INT0); // atmega32
|
||||
#elif defined(GIMSK) && defined(INT0)
|
||||
GIMSK &= ~(1 << INT0);
|
||||
#else
|
||||
#error detachInterrupt not finished for this cpu
|
||||
#endif
|
||||
break;
|
||||
|
||||
case 1:
|
||||
#if defined(EIMSK) && defined(INT1)
|
||||
EIMSK &= ~(1 << INT1);
|
||||
#elif defined(GICR) && defined(INT1)
|
||||
GICR &= ~(1 << INT1); // atmega32
|
||||
#elif defined(GIMSK) && defined(INT1)
|
||||
GIMSK &= ~(1 << INT1);
|
||||
#else
|
||||
#warning detachInterrupt may need some more work for this cpu (case 1)
|
||||
#endif
|
||||
break;
|
||||
#endif
|
||||
}
|
||||
|
||||
intFunc[interruptNum] = 0;
|
||||
}
|
||||
}
|
||||
|
||||
/*
|
||||
void attachInterruptTwi(void (*userFunc)(void) ) {
|
||||
twiIntFunc = userFunc;
|
||||
}
|
||||
*/
|
||||
|
||||
#if defined(__AVR_ATmega32U4__)
|
||||
SIGNAL(INT0_vect) {
|
||||
if(intFunc[EXTERNAL_INT_0])
|
||||
intFunc[EXTERNAL_INT_0]();
|
||||
}
|
||||
|
||||
SIGNAL(INT1_vect) {
|
||||
if(intFunc[EXTERNAL_INT_1])
|
||||
intFunc[EXTERNAL_INT_1]();
|
||||
}
|
||||
|
||||
SIGNAL(INT2_vect) {
|
||||
if(intFunc[EXTERNAL_INT_2])
|
||||
intFunc[EXTERNAL_INT_2]();
|
||||
}
|
||||
|
||||
SIGNAL(INT3_vect) {
|
||||
if(intFunc[EXTERNAL_INT_3])
|
||||
intFunc[EXTERNAL_INT_3]();
|
||||
}
|
||||
|
||||
#elif defined(EICRA) && defined(EICRB)
|
||||
|
||||
SIGNAL(INT0_vect) {
|
||||
if(intFunc[EXTERNAL_INT_2])
|
||||
intFunc[EXTERNAL_INT_2]();
|
||||
}
|
||||
|
||||
SIGNAL(INT1_vect) {
|
||||
if(intFunc[EXTERNAL_INT_3])
|
||||
intFunc[EXTERNAL_INT_3]();
|
||||
}
|
||||
|
||||
SIGNAL(INT2_vect) {
|
||||
if(intFunc[EXTERNAL_INT_4])
|
||||
intFunc[EXTERNAL_INT_4]();
|
||||
}
|
||||
|
||||
SIGNAL(INT3_vect) {
|
||||
if(intFunc[EXTERNAL_INT_5])
|
||||
intFunc[EXTERNAL_INT_5]();
|
||||
}
|
||||
|
||||
SIGNAL(INT4_vect) {
|
||||
if(intFunc[EXTERNAL_INT_0])
|
||||
intFunc[EXTERNAL_INT_0]();
|
||||
}
|
||||
|
||||
SIGNAL(INT5_vect) {
|
||||
if(intFunc[EXTERNAL_INT_1])
|
||||
intFunc[EXTERNAL_INT_1]();
|
||||
}
|
||||
|
||||
SIGNAL(INT6_vect) {
|
||||
if(intFunc[EXTERNAL_INT_6])
|
||||
intFunc[EXTERNAL_INT_6]();
|
||||
}
|
||||
|
||||
SIGNAL(INT7_vect) {
|
||||
if(intFunc[EXTERNAL_INT_7])
|
||||
intFunc[EXTERNAL_INT_7]();
|
||||
}
|
||||
|
||||
#else
|
||||
|
||||
SIGNAL(INT0_vect) {
|
||||
if(intFunc[EXTERNAL_INT_0])
|
||||
intFunc[EXTERNAL_INT_0]();
|
||||
}
|
||||
|
||||
SIGNAL(INT1_vect) {
|
||||
if(intFunc[EXTERNAL_INT_1])
|
||||
intFunc[EXTERNAL_INT_1]();
|
||||
}
|
||||
|
||||
#if defined(EICRA) && defined(ISC20)
|
||||
SIGNAL(INT2_vect) {
|
||||
if(intFunc[EXTERNAL_INT_2])
|
||||
intFunc[EXTERNAL_INT_2]();
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif
|
||||
|
||||
/*
|
||||
SIGNAL(SIG_2WIRE_SERIAL) {
|
||||
if(twiIntFunc)
|
||||
twiIntFunc();
|
||||
}
|
||||
*/
|
||||
|
||||
@ -0,0 +1,60 @@
|
||||
/* -*- mode: jde; c-basic-offset: 2; indent-tabs-mode: nil -*- */
|
||||
|
||||
/*
|
||||
Part of the Wiring project - http://wiring.org.co
|
||||
Copyright (c) 2004-06 Hernando Barragan
|
||||
Modified 13 August 2006, David A. Mellis for Arduino - http://www.arduino.cc/
|
||||
|
||||
This library is free software; you can redistribute it and/or
|
||||
modify it under the terms of the GNU Lesser General Public
|
||||
License as published by the Free Software Foundation; either
|
||||
version 2.1 of the License, or (at your option) any later version.
|
||||
|
||||
This library is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
||||
Lesser General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU Lesser General
|
||||
Public License along with this library; if not, write to the
|
||||
Free Software Foundation, Inc., 59 Temple Place, Suite 330,
|
||||
Boston, MA 02111-1307 USA
|
||||
|
||||
$Id$
|
||||
*/
|
||||
|
||||
extern "C" {
|
||||
#include "stdlib.h"
|
||||
}
|
||||
|
||||
void randomSeed(unsigned int seed)
|
||||
{
|
||||
if (seed != 0) {
|
||||
srandom(seed);
|
||||
}
|
||||
}
|
||||
|
||||
long random(long howbig)
|
||||
{
|
||||
if (howbig == 0) {
|
||||
return 0;
|
||||
}
|
||||
return random() % howbig;
|
||||
}
|
||||
|
||||
long random(long howsmall, long howbig)
|
||||
{
|
||||
if (howsmall >= howbig) {
|
||||
return howsmall;
|
||||
}
|
||||
long diff = howbig - howsmall;
|
||||
return random(diff) + howsmall;
|
||||
}
|
||||
|
||||
long map(long x, long in_min, long in_max, long out_min, long out_max)
|
||||
{
|
||||
return (x - in_min) * (out_max - out_min) / (in_max - in_min) + out_min;
|
||||
}
|
||||
|
||||
unsigned int makeWord(unsigned int w) { return w; }
|
||||
unsigned int makeWord(unsigned char h, unsigned char l) { return (h << 8) | l; }
|
||||
@ -0,0 +1,645 @@
|
||||
/*
|
||||
WString.cpp - String library for Wiring & Arduino
|
||||
...mostly rewritten by Paul Stoffregen...
|
||||
Copyright (c) 2009-10 Hernando Barragan. All rights reserved.
|
||||
Copyright 2011, Paul Stoffregen, paul@pjrc.com
|
||||
|
||||
This library is free software; you can redistribute it and/or
|
||||
modify it under the terms of the GNU Lesser General Public
|
||||
License as published by the Free Software Foundation; either
|
||||
version 2.1 of the License, or (at your option) any later version.
|
||||
|
||||
This library is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
||||
Lesser General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU Lesser General Public
|
||||
License along with this library; if not, write to the Free Software
|
||||
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||
*/
|
||||
|
||||
#include "WString.h"
|
||||
|
||||
|
||||
/*********************************************/
|
||||
/* Constructors */
|
||||
/*********************************************/
|
||||
|
||||
String::String(const char *cstr)
|
||||
{
|
||||
init();
|
||||
if (cstr) copy(cstr, strlen(cstr));
|
||||
}
|
||||
|
||||
String::String(const String &value)
|
||||
{
|
||||
init();
|
||||
*this = value;
|
||||
}
|
||||
|
||||
#ifdef __GXX_EXPERIMENTAL_CXX0X__
|
||||
String::String(String &&rval)
|
||||
{
|
||||
init();
|
||||
move(rval);
|
||||
}
|
||||
String::String(StringSumHelper &&rval)
|
||||
{
|
||||
init();
|
||||
move(rval);
|
||||
}
|
||||
#endif
|
||||
|
||||
String::String(char c)
|
||||
{
|
||||
init();
|
||||
char buf[2];
|
||||
buf[0] = c;
|
||||
buf[1] = 0;
|
||||
*this = buf;
|
||||
}
|
||||
|
||||
String::String(unsigned char value, unsigned char base)
|
||||
{
|
||||
init();
|
||||
char buf[9];
|
||||
utoa(value, buf, base);
|
||||
*this = buf;
|
||||
}
|
||||
|
||||
String::String(int value, unsigned char base)
|
||||
{
|
||||
init();
|
||||
char buf[18];
|
||||
itoa(value, buf, base);
|
||||
*this = buf;
|
||||
}
|
||||
|
||||
String::String(unsigned int value, unsigned char base)
|
||||
{
|
||||
init();
|
||||
char buf[17];
|
||||
utoa(value, buf, base);
|
||||
*this = buf;
|
||||
}
|
||||
|
||||
String::String(long value, unsigned char base)
|
||||
{
|
||||
init();
|
||||
char buf[34];
|
||||
ltoa(value, buf, base);
|
||||
*this = buf;
|
||||
}
|
||||
|
||||
String::String(unsigned long value, unsigned char base)
|
||||
{
|
||||
init();
|
||||
char buf[33];
|
||||
ultoa(value, buf, base);
|
||||
*this = buf;
|
||||
}
|
||||
|
||||
String::~String()
|
||||
{
|
||||
free(buffer);
|
||||
}
|
||||
|
||||
/*********************************************/
|
||||
/* Memory Management */
|
||||
/*********************************************/
|
||||
|
||||
inline void String::init(void)
|
||||
{
|
||||
buffer = NULL;
|
||||
capacity = 0;
|
||||
len = 0;
|
||||
flags = 0;
|
||||
}
|
||||
|
||||
void String::invalidate(void)
|
||||
{
|
||||
if (buffer) free(buffer);
|
||||
buffer = NULL;
|
||||
capacity = len = 0;
|
||||
}
|
||||
|
||||
unsigned char String::reserve(unsigned int size)
|
||||
{
|
||||
if (buffer && capacity >= size) return 1;
|
||||
if (changeBuffer(size)) {
|
||||
if (len == 0) buffer[0] = 0;
|
||||
return 1;
|
||||
}
|
||||
return 0;
|
||||
}
|
||||
|
||||
unsigned char String::changeBuffer(unsigned int maxStrLen)
|
||||
{
|
||||
char *newbuffer = (char *)realloc(buffer, maxStrLen + 1);
|
||||
if (newbuffer) {
|
||||
buffer = newbuffer;
|
||||
capacity = maxStrLen;
|
||||
return 1;
|
||||
}
|
||||
return 0;
|
||||
}
|
||||
|
||||
/*********************************************/
|
||||
/* Copy and Move */
|
||||
/*********************************************/
|
||||
|
||||
String & String::copy(const char *cstr, unsigned int length)
|
||||
{
|
||||
if (!reserve(length)) {
|
||||
invalidate();
|
||||
return *this;
|
||||
}
|
||||
len = length;
|
||||
strcpy(buffer, cstr);
|
||||
return *this;
|
||||
}
|
||||
|
||||
#ifdef __GXX_EXPERIMENTAL_CXX0X__
|
||||
void String::move(String &rhs)
|
||||
{
|
||||
if (buffer) {
|
||||
if (capacity >= rhs.len) {
|
||||
strcpy(buffer, rhs.buffer);
|
||||
len = rhs.len;
|
||||
rhs.len = 0;
|
||||
return;
|
||||
} else {
|
||||
free(buffer);
|
||||
}
|
||||
}
|
||||
buffer = rhs.buffer;
|
||||
capacity = rhs.capacity;
|
||||
len = rhs.len;
|
||||
rhs.buffer = NULL;
|
||||
rhs.capacity = 0;
|
||||
rhs.len = 0;
|
||||
}
|
||||
#endif
|
||||
|
||||
String & String::operator = (const String &rhs)
|
||||
{
|
||||
if (this == &rhs) return *this;
|
||||
|
||||
if (rhs.buffer) copy(rhs.buffer, rhs.len);
|
||||
else invalidate();
|
||||
|
||||
return *this;
|
||||
}
|
||||
|
||||
#ifdef __GXX_EXPERIMENTAL_CXX0X__
|
||||
String & String::operator = (String &&rval)
|
||||
{
|
||||
if (this != &rval) move(rval);
|
||||
return *this;
|
||||
}
|
||||
|
||||
String & String::operator = (StringSumHelper &&rval)
|
||||
{
|
||||
if (this != &rval) move(rval);
|
||||
return *this;
|
||||
}
|
||||
#endif
|
||||
|
||||
String & String::operator = (const char *cstr)
|
||||
{
|
||||
if (cstr) copy(cstr, strlen(cstr));
|
||||
else invalidate();
|
||||
|
||||
return *this;
|
||||
}
|
||||
|
||||
/*********************************************/
|
||||
/* concat */
|
||||
/*********************************************/
|
||||
|
||||
unsigned char String::concat(const String &s)
|
||||
{
|
||||
return concat(s.buffer, s.len);
|
||||
}
|
||||
|
||||
unsigned char String::concat(const char *cstr, unsigned int length)
|
||||
{
|
||||
unsigned int newlen = len + length;
|
||||
if (!cstr) return 0;
|
||||
if (length == 0) return 1;
|
||||
if (!reserve(newlen)) return 0;
|
||||
strcpy(buffer + len, cstr);
|
||||
len = newlen;
|
||||
return 1;
|
||||
}
|
||||
|
||||
unsigned char String::concat(const char *cstr)
|
||||
{
|
||||
if (!cstr) return 0;
|
||||
return concat(cstr, strlen(cstr));
|
||||
}
|
||||
|
||||
unsigned char String::concat(char c)
|
||||
{
|
||||
char buf[2];
|
||||
buf[0] = c;
|
||||
buf[1] = 0;
|
||||
return concat(buf, 1);
|
||||
}
|
||||
|
||||
unsigned char String::concat(unsigned char num)
|
||||
{
|
||||
char buf[4];
|
||||
itoa(num, buf, 10);
|
||||
return concat(buf, strlen(buf));
|
||||
}
|
||||
|
||||
unsigned char String::concat(int num)
|
||||
{
|
||||
char buf[7];
|
||||
itoa(num, buf, 10);
|
||||
return concat(buf, strlen(buf));
|
||||
}
|
||||
|
||||
unsigned char String::concat(unsigned int num)
|
||||
{
|
||||
char buf[6];
|
||||
utoa(num, buf, 10);
|
||||
return concat(buf, strlen(buf));
|
||||
}
|
||||
|
||||
unsigned char String::concat(long num)
|
||||
{
|
||||
char buf[12];
|
||||
ltoa(num, buf, 10);
|
||||
return concat(buf, strlen(buf));
|
||||
}
|
||||
|
||||
unsigned char String::concat(unsigned long num)
|
||||
{
|
||||
char buf[11];
|
||||
ultoa(num, buf, 10);
|
||||
return concat(buf, strlen(buf));
|
||||
}
|
||||
|
||||
/*********************************************/
|
||||
/* Concatenate */
|
||||
/*********************************************/
|
||||
|
||||
StringSumHelper & operator + (const StringSumHelper &lhs, const String &rhs)
|
||||
{
|
||||
StringSumHelper &a = const_cast<StringSumHelper&>(lhs);
|
||||
if (!a.concat(rhs.buffer, rhs.len)) a.invalidate();
|
||||
return a;
|
||||
}
|
||||
|
||||
StringSumHelper & operator + (const StringSumHelper &lhs, const char *cstr)
|
||||
{
|
||||
StringSumHelper &a = const_cast<StringSumHelper&>(lhs);
|
||||
if (!cstr || !a.concat(cstr, strlen(cstr))) a.invalidate();
|
||||
return a;
|
||||
}
|
||||
|
||||
StringSumHelper & operator + (const StringSumHelper &lhs, char c)
|
||||
{
|
||||
StringSumHelper &a = const_cast<StringSumHelper&>(lhs);
|
||||
if (!a.concat(c)) a.invalidate();
|
||||
return a;
|
||||
}
|
||||
|
||||
StringSumHelper & operator + (const StringSumHelper &lhs, unsigned char num)
|
||||
{
|
||||
StringSumHelper &a = const_cast<StringSumHelper&>(lhs);
|
||||
if (!a.concat(num)) a.invalidate();
|
||||
return a;
|
||||
}
|
||||
|
||||
StringSumHelper & operator + (const StringSumHelper &lhs, int num)
|
||||
{
|
||||
StringSumHelper &a = const_cast<StringSumHelper&>(lhs);
|
||||
if (!a.concat(num)) a.invalidate();
|
||||
return a;
|
||||
}
|
||||
|
||||
StringSumHelper & operator + (const StringSumHelper &lhs, unsigned int num)
|
||||
{
|
||||
StringSumHelper &a = const_cast<StringSumHelper&>(lhs);
|
||||
if (!a.concat(num)) a.invalidate();
|
||||
return a;
|
||||
}
|
||||
|
||||
StringSumHelper & operator + (const StringSumHelper &lhs, long num)
|
||||
{
|
||||
StringSumHelper &a = const_cast<StringSumHelper&>(lhs);
|
||||
if (!a.concat(num)) a.invalidate();
|
||||
return a;
|
||||
}
|
||||
|
||||
StringSumHelper & operator + (const StringSumHelper &lhs, unsigned long num)
|
||||
{
|
||||
StringSumHelper &a = const_cast<StringSumHelper&>(lhs);
|
||||
if (!a.concat(num)) a.invalidate();
|
||||
return a;
|
||||
}
|
||||
|
||||
/*********************************************/
|
||||
/* Comparison */
|
||||
/*********************************************/
|
||||
|
||||
int String::compareTo(const String &s) const
|
||||
{
|
||||
if (!buffer || !s.buffer) {
|
||||
if (s.buffer && s.len > 0) return 0 - *(unsigned char *)s.buffer;
|
||||
if (buffer && len > 0) return *(unsigned char *)buffer;
|
||||
return 0;
|
||||
}
|
||||
return strcmp(buffer, s.buffer);
|
||||
}
|
||||
|
||||
unsigned char String::equals(const String &s2) const
|
||||
{
|
||||
return (len == s2.len && compareTo(s2) == 0);
|
||||
}
|
||||
|
||||
unsigned char String::equals(const char *cstr) const
|
||||
{
|
||||
if (len == 0) return (cstr == NULL || *cstr == 0);
|
||||
if (cstr == NULL) return buffer[0] == 0;
|
||||
return strcmp(buffer, cstr) == 0;
|
||||
}
|
||||
|
||||
unsigned char String::operator<(const String &rhs) const
|
||||
{
|
||||
return compareTo(rhs) < 0;
|
||||
}
|
||||
|
||||
unsigned char String::operator>(const String &rhs) const
|
||||
{
|
||||
return compareTo(rhs) > 0;
|
||||
}
|
||||
|
||||
unsigned char String::operator<=(const String &rhs) const
|
||||
{
|
||||
return compareTo(rhs) <= 0;
|
||||
}
|
||||
|
||||
unsigned char String::operator>=(const String &rhs) const
|
||||
{
|
||||
return compareTo(rhs) >= 0;
|
||||
}
|
||||
|
||||
unsigned char String::equalsIgnoreCase( const String &s2 ) const
|
||||
{
|
||||
if (this == &s2) return 1;
|
||||
if (len != s2.len) return 0;
|
||||
if (len == 0) return 1;
|
||||
const char *p1 = buffer;
|
||||
const char *p2 = s2.buffer;
|
||||
while (*p1) {
|
||||
if (tolower(*p1++) != tolower(*p2++)) return 0;
|
||||
}
|
||||
return 1;
|
||||
}
|
||||
|
||||
unsigned char String::startsWith( const String &s2 ) const
|
||||
{
|
||||
if (len < s2.len) return 0;
|
||||
return startsWith(s2, 0);
|
||||
}
|
||||
|
||||
unsigned char String::startsWith( const String &s2, unsigned int offset ) const
|
||||
{
|
||||
if (offset > len - s2.len || !buffer || !s2.buffer) return 0;
|
||||
return strncmp( &buffer[offset], s2.buffer, s2.len ) == 0;
|
||||
}
|
||||
|
||||
unsigned char String::endsWith( const String &s2 ) const
|
||||
{
|
||||
if ( len < s2.len || !buffer || !s2.buffer) return 0;
|
||||
return strcmp(&buffer[len - s2.len], s2.buffer) == 0;
|
||||
}
|
||||
|
||||
/*********************************************/
|
||||
/* Character Access */
|
||||
/*********************************************/
|
||||
|
||||
char String::charAt(unsigned int loc) const
|
||||
{
|
||||
return operator[](loc);
|
||||
}
|
||||
|
||||
void String::setCharAt(unsigned int loc, char c)
|
||||
{
|
||||
if (loc < len) buffer[loc] = c;
|
||||
}
|
||||
|
||||
char & String::operator[](unsigned int index)
|
||||
{
|
||||
static char dummy_writable_char;
|
||||
if (index >= len || !buffer) {
|
||||
dummy_writable_char = 0;
|
||||
return dummy_writable_char;
|
||||
}
|
||||
return buffer[index];
|
||||
}
|
||||
|
||||
char String::operator[]( unsigned int index ) const
|
||||
{
|
||||
if (index >= len || !buffer) return 0;
|
||||
return buffer[index];
|
||||
}
|
||||
|
||||
void String::getBytes(unsigned char *buf, unsigned int bufsize, unsigned int index) const
|
||||
{
|
||||
if (!bufsize || !buf) return;
|
||||
if (index >= len) {
|
||||
buf[0] = 0;
|
||||
return;
|
||||
}
|
||||
unsigned int n = bufsize - 1;
|
||||
if (n > len - index) n = len - index;
|
||||
strncpy((char *)buf, buffer + index, n);
|
||||
buf[n] = 0;
|
||||
}
|
||||
|
||||
/*********************************************/
|
||||
/* Search */
|
||||
/*********************************************/
|
||||
|
||||
int String::indexOf(char c) const
|
||||
{
|
||||
return indexOf(c, 0);
|
||||
}
|
||||
|
||||
int String::indexOf( char ch, unsigned int fromIndex ) const
|
||||
{
|
||||
if (fromIndex >= len) return -1;
|
||||
const char* temp = strchr(buffer + fromIndex, ch);
|
||||
if (temp == NULL) return -1;
|
||||
return temp - buffer;
|
||||
}
|
||||
|
||||
int String::indexOf(const String &s2) const
|
||||
{
|
||||
return indexOf(s2, 0);
|
||||
}
|
||||
|
||||
int String::indexOf(const String &s2, unsigned int fromIndex) const
|
||||
{
|
||||
if (fromIndex >= len) return -1;
|
||||
const char *found = strstr(buffer + fromIndex, s2.buffer);
|
||||
if (found == NULL) return -1;
|
||||
return found - buffer;
|
||||
}
|
||||
|
||||
int String::lastIndexOf( char theChar ) const
|
||||
{
|
||||
return lastIndexOf(theChar, len - 1);
|
||||
}
|
||||
|
||||
int String::lastIndexOf(char ch, unsigned int fromIndex) const
|
||||
{
|
||||
if (fromIndex >= len) return -1;
|
||||
char tempchar = buffer[fromIndex + 1];
|
||||
buffer[fromIndex + 1] = '\0';
|
||||
char* temp = strrchr( buffer, ch );
|
||||
buffer[fromIndex + 1] = tempchar;
|
||||
if (temp == NULL) return -1;
|
||||
return temp - buffer;
|
||||
}
|
||||
|
||||
int String::lastIndexOf(const String &s2) const
|
||||
{
|
||||
return lastIndexOf(s2, len - s2.len);
|
||||
}
|
||||
|
||||
int String::lastIndexOf(const String &s2, unsigned int fromIndex) const
|
||||
{
|
||||
if (s2.len == 0 || len == 0 || s2.len > len) return -1;
|
||||
if (fromIndex >= len) fromIndex = len - 1;
|
||||
int found = -1;
|
||||
for (char *p = buffer; p <= buffer + fromIndex; p++) {
|
||||
p = strstr(p, s2.buffer);
|
||||
if (!p) break;
|
||||
if ((unsigned int)(p - buffer) <= fromIndex) found = p - buffer;
|
||||
}
|
||||
return found;
|
||||
}
|
||||
|
||||
String String::substring( unsigned int left ) const
|
||||
{
|
||||
return substring(left, len);
|
||||
}
|
||||
|
||||
String String::substring(unsigned int left, unsigned int right) const
|
||||
{
|
||||
if (left > right) {
|
||||
unsigned int temp = right;
|
||||
right = left;
|
||||
left = temp;
|
||||
}
|
||||
String out;
|
||||
if (left > len) return out;
|
||||
if (right > len) right = len;
|
||||
char temp = buffer[right]; // save the replaced character
|
||||
buffer[right] = '\0';
|
||||
out = buffer + left; // pointer arithmetic
|
||||
buffer[right] = temp; //restore character
|
||||
return out;
|
||||
}
|
||||
|
||||
/*********************************************/
|
||||
/* Modification */
|
||||
/*********************************************/
|
||||
|
||||
void String::replace(char find, char replace)
|
||||
{
|
||||
if (!buffer) return;
|
||||
for (char *p = buffer; *p; p++) {
|
||||
if (*p == find) *p = replace;
|
||||
}
|
||||
}
|
||||
|
||||
void String::replace(const String& find, const String& replace)
|
||||
{
|
||||
if (len == 0 || find.len == 0) return;
|
||||
int diff = replace.len - find.len;
|
||||
char *readFrom = buffer;
|
||||
char *foundAt;
|
||||
if (diff == 0) {
|
||||
while ((foundAt = strstr(readFrom, find.buffer)) != NULL) {
|
||||
memcpy(foundAt, replace.buffer, replace.len);
|
||||
readFrom = foundAt + replace.len;
|
||||
}
|
||||
} else if (diff < 0) {
|
||||
char *writeTo = buffer;
|
||||
while ((foundAt = strstr(readFrom, find.buffer)) != NULL) {
|
||||
unsigned int n = foundAt - readFrom;
|
||||
memcpy(writeTo, readFrom, n);
|
||||
writeTo += n;
|
||||
memcpy(writeTo, replace.buffer, replace.len);
|
||||
writeTo += replace.len;
|
||||
readFrom = foundAt + find.len;
|
||||
len += diff;
|
||||
}
|
||||
strcpy(writeTo, readFrom);
|
||||
} else {
|
||||
unsigned int size = len; // compute size needed for result
|
||||
while ((foundAt = strstr(readFrom, find.buffer)) != NULL) {
|
||||
readFrom = foundAt + find.len;
|
||||
size += diff;
|
||||
}
|
||||
if (size == len) return;
|
||||
if (size > capacity && !changeBuffer(size)) return; // XXX: tell user!
|
||||
int index = len - 1;
|
||||
while (index >= 0 && (index = lastIndexOf(find, index)) >= 0) {
|
||||
readFrom = buffer + index + find.len;
|
||||
memmove(readFrom + diff, readFrom, len - (readFrom - buffer));
|
||||
len += diff;
|
||||
buffer[len] = 0;
|
||||
memcpy(buffer + index, replace.buffer, replace.len);
|
||||
index--;
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
void String::toLowerCase(void)
|
||||
{
|
||||
if (!buffer) return;
|
||||
for (char *p = buffer; *p; p++) {
|
||||
*p = tolower(*p);
|
||||
}
|
||||
}
|
||||
|
||||
void String::toUpperCase(void)
|
||||
{
|
||||
if (!buffer) return;
|
||||
for (char *p = buffer; *p; p++) {
|
||||
*p = toupper(*p);
|
||||
}
|
||||
}
|
||||
|
||||
void String::trim(void)
|
||||
{
|
||||
if (!buffer || len == 0) return;
|
||||
char *begin = buffer;
|
||||
while (isspace(*begin)) begin++;
|
||||
char *end = buffer + len - 1;
|
||||
while (isspace(*end) && end >= begin) end--;
|
||||
len = end + 1 - begin;
|
||||
if (begin > buffer) memcpy(buffer, begin, len);
|
||||
buffer[len] = 0;
|
||||
}
|
||||
|
||||
/*********************************************/
|
||||
/* Parsing / Conversion */
|
||||
/*********************************************/
|
||||
|
||||
long String::toInt(void) const
|
||||
{
|
||||
if (buffer) return atol(buffer);
|
||||
return 0;
|
||||
}
|
||||
|
||||
|
||||
@ -0,0 +1,205 @@
|
||||
/*
|
||||
WString.h - String library for Wiring & Arduino
|
||||
...mostly rewritten by Paul Stoffregen...
|
||||
Copyright (c) 2009-10 Hernando Barragan. All right reserved.
|
||||
Copyright 2011, Paul Stoffregen, paul@pjrc.com
|
||||
|
||||
This library is free software; you can redistribute it and/or
|
||||
modify it under the terms of the GNU Lesser General Public
|
||||
License as published by the Free Software Foundation; either
|
||||
version 2.1 of the License, or (at your option) any later version.
|
||||
|
||||
This library is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
||||
Lesser General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU Lesser General Public
|
||||
License along with this library; if not, write to the Free Software
|
||||
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||
*/
|
||||
|
||||
#ifndef String_class_h
|
||||
#define String_class_h
|
||||
#ifdef __cplusplus
|
||||
|
||||
#include <stdlib.h>
|
||||
#include <string.h>
|
||||
#include <ctype.h>
|
||||
#include <avr/pgmspace.h>
|
||||
|
||||
// When compiling programs with this class, the following gcc parameters
|
||||
// dramatically increase performance and memory (RAM) efficiency, typically
|
||||
// with little or no increase in code size.
|
||||
// -felide-constructors
|
||||
// -std=c++0x
|
||||
|
||||
class __FlashStringHelper;
|
||||
#define F(string_literal) (reinterpret_cast<const __FlashStringHelper *>(PSTR(string_literal)))
|
||||
|
||||
// An inherited class for holding the result of a concatenation. These
|
||||
// result objects are assumed to be writable by subsequent concatenations.
|
||||
class StringSumHelper;
|
||||
|
||||
// The string class
|
||||
class String
|
||||
{
|
||||
// use a function pointer to allow for "if (s)" without the
|
||||
// complications of an operator bool(). for more information, see:
|
||||
// http://www.artima.com/cppsource/safebool.html
|
||||
typedef void (String::*StringIfHelperType)() const;
|
||||
void StringIfHelper() const {}
|
||||
|
||||
public:
|
||||
// constructors
|
||||
// creates a copy of the initial value.
|
||||
// if the initial value is null or invalid, or if memory allocation
|
||||
// fails, the string will be marked as invalid (i.e. "if (s)" will
|
||||
// be false).
|
||||
String(const char *cstr = "");
|
||||
String(const String &str);
|
||||
#ifdef __GXX_EXPERIMENTAL_CXX0X__
|
||||
String(String &&rval);
|
||||
String(StringSumHelper &&rval);
|
||||
#endif
|
||||
explicit String(char c);
|
||||
explicit String(unsigned char, unsigned char base=10);
|
||||
explicit String(int, unsigned char base=10);
|
||||
explicit String(unsigned int, unsigned char base=10);
|
||||
explicit String(long, unsigned char base=10);
|
||||
explicit String(unsigned long, unsigned char base=10);
|
||||
~String(void);
|
||||
|
||||
// memory management
|
||||
// return true on success, false on failure (in which case, the string
|
||||
// is left unchanged). reserve(0), if successful, will validate an
|
||||
// invalid string (i.e., "if (s)" will be true afterwards)
|
||||
unsigned char reserve(unsigned int size);
|
||||
inline unsigned int length(void) const {return len;}
|
||||
|
||||
// creates a copy of the assigned value. if the value is null or
|
||||
// invalid, or if the memory allocation fails, the string will be
|
||||
// marked as invalid ("if (s)" will be false).
|
||||
String & operator = (const String &rhs);
|
||||
String & operator = (const char *cstr);
|
||||
#ifdef __GXX_EXPERIMENTAL_CXX0X__
|
||||
String & operator = (String &&rval);
|
||||
String & operator = (StringSumHelper &&rval);
|
||||
#endif
|
||||
|
||||
// concatenate (works w/ built-in types)
|
||||
|
||||
// returns true on success, false on failure (in which case, the string
|
||||
// is left unchanged). if the argument is null or invalid, the
|
||||
// concatenation is considered unsucessful.
|
||||
unsigned char concat(const String &str);
|
||||
unsigned char concat(const char *cstr);
|
||||
unsigned char concat(char c);
|
||||
unsigned char concat(unsigned char c);
|
||||
unsigned char concat(int num);
|
||||
unsigned char concat(unsigned int num);
|
||||
unsigned char concat(long num);
|
||||
unsigned char concat(unsigned long num);
|
||||
|
||||
// if there's not enough memory for the concatenated value, the string
|
||||
// will be left unchanged (but this isn't signalled in any way)
|
||||
String & operator += (const String &rhs) {concat(rhs); return (*this);}
|
||||
String & operator += (const char *cstr) {concat(cstr); return (*this);}
|
||||
String & operator += (char c) {concat(c); return (*this);}
|
||||
String & operator += (unsigned char num) {concat(num); return (*this);}
|
||||
String & operator += (int num) {concat(num); return (*this);}
|
||||
String & operator += (unsigned int num) {concat(num); return (*this);}
|
||||
String & operator += (long num) {concat(num); return (*this);}
|
||||
String & operator += (unsigned long num) {concat(num); return (*this);}
|
||||
|
||||
friend StringSumHelper & operator + (const StringSumHelper &lhs, const String &rhs);
|
||||
friend StringSumHelper & operator + (const StringSumHelper &lhs, const char *cstr);
|
||||
friend StringSumHelper & operator + (const StringSumHelper &lhs, char c);
|
||||
friend StringSumHelper & operator + (const StringSumHelper &lhs, unsigned char num);
|
||||
friend StringSumHelper & operator + (const StringSumHelper &lhs, int num);
|
||||
friend StringSumHelper & operator + (const StringSumHelper &lhs, unsigned int num);
|
||||
friend StringSumHelper & operator + (const StringSumHelper &lhs, long num);
|
||||
friend StringSumHelper & operator + (const StringSumHelper &lhs, unsigned long num);
|
||||
|
||||
// comparison (only works w/ Strings and "strings")
|
||||
operator StringIfHelperType() const { return buffer ? &String::StringIfHelper : 0; }
|
||||
int compareTo(const String &s) const;
|
||||
unsigned char equals(const String &s) const;
|
||||
unsigned char equals(const char *cstr) const;
|
||||
unsigned char operator == (const String &rhs) const {return equals(rhs);}
|
||||
unsigned char operator == (const char *cstr) const {return equals(cstr);}
|
||||
unsigned char operator != (const String &rhs) const {return !equals(rhs);}
|
||||
unsigned char operator != (const char *cstr) const {return !equals(cstr);}
|
||||
unsigned char operator < (const String &rhs) const;
|
||||
unsigned char operator > (const String &rhs) const;
|
||||
unsigned char operator <= (const String &rhs) const;
|
||||
unsigned char operator >= (const String &rhs) const;
|
||||
unsigned char equalsIgnoreCase(const String &s) const;
|
||||
unsigned char startsWith( const String &prefix) const;
|
||||
unsigned char startsWith(const String &prefix, unsigned int offset) const;
|
||||
unsigned char endsWith(const String &suffix) const;
|
||||
|
||||
// character acccess
|
||||
char charAt(unsigned int index) const;
|
||||
void setCharAt(unsigned int index, char c);
|
||||
char operator [] (unsigned int index) const;
|
||||
char& operator [] (unsigned int index);
|
||||
void getBytes(unsigned char *buf, unsigned int bufsize, unsigned int index=0) const;
|
||||
void toCharArray(char *buf, unsigned int bufsize, unsigned int index=0) const
|
||||
{getBytes((unsigned char *)buf, bufsize, index);}
|
||||
|
||||
// search
|
||||
int indexOf( char ch ) const;
|
||||
int indexOf( char ch, unsigned int fromIndex ) const;
|
||||
int indexOf( const String &str ) const;
|
||||
int indexOf( const String &str, unsigned int fromIndex ) const;
|
||||
int lastIndexOf( char ch ) const;
|
||||
int lastIndexOf( char ch, unsigned int fromIndex ) const;
|
||||
int lastIndexOf( const String &str ) const;
|
||||
int lastIndexOf( const String &str, unsigned int fromIndex ) const;
|
||||
String substring( unsigned int beginIndex ) const;
|
||||
String substring( unsigned int beginIndex, unsigned int endIndex ) const;
|
||||
|
||||
// modification
|
||||
void replace(char find, char replace);
|
||||
void replace(const String& find, const String& replace);
|
||||
void toLowerCase(void);
|
||||
void toUpperCase(void);
|
||||
void trim(void);
|
||||
|
||||
// parsing/conversion
|
||||
long toInt(void) const;
|
||||
|
||||
protected:
|
||||
char *buffer; // the actual char array
|
||||
unsigned int capacity; // the array length minus one (for the '\0')
|
||||
unsigned int len; // the String length (not counting the '\0')
|
||||
unsigned char flags; // unused, for future features
|
||||
protected:
|
||||
void init(void);
|
||||
void invalidate(void);
|
||||
unsigned char changeBuffer(unsigned int maxStrLen);
|
||||
unsigned char concat(const char *cstr, unsigned int length);
|
||||
|
||||
// copy and move
|
||||
String & copy(const char *cstr, unsigned int length);
|
||||
#ifdef __GXX_EXPERIMENTAL_CXX0X__
|
||||
void move(String &rhs);
|
||||
#endif
|
||||
};
|
||||
|
||||
class StringSumHelper : public String
|
||||
{
|
||||
public:
|
||||
StringSumHelper(const String &s) : String(s) {}
|
||||
StringSumHelper(const char *p) : String(p) {}
|
||||
StringSumHelper(char c) : String(c) {}
|
||||
StringSumHelper(unsigned char num) : String(num) {}
|
||||
StringSumHelper(int num) : String(num) {}
|
||||
StringSumHelper(unsigned int num) : String(num) {}
|
||||
StringSumHelper(long num) : String(num) {}
|
||||
StringSumHelper(unsigned long num) : String(num) {}
|
||||
};
|
||||
|
||||
#endif // __cplusplus
|
||||
#endif // String_class_h
|
||||
@ -0,0 +1,515 @@
|
||||
#ifndef Binary_h
|
||||
#define Binary_h
|
||||
|
||||
#define B0 0
|
||||
#define B00 0
|
||||
#define B000 0
|
||||
#define B0000 0
|
||||
#define B00000 0
|
||||
#define B000000 0
|
||||
#define B0000000 0
|
||||
#define B00000000 0
|
||||
#define B1 1
|
||||
#define B01 1
|
||||
#define B001 1
|
||||
#define B0001 1
|
||||
#define B00001 1
|
||||
#define B000001 1
|
||||
#define B0000001 1
|
||||
#define B00000001 1
|
||||
#define B10 2
|
||||
#define B010 2
|
||||
#define B0010 2
|
||||
#define B00010 2
|
||||
#define B000010 2
|
||||
#define B0000010 2
|
||||
#define B00000010 2
|
||||
#define B11 3
|
||||
#define B011 3
|
||||
#define B0011 3
|
||||
#define B00011 3
|
||||
#define B000011 3
|
||||
#define B0000011 3
|
||||
#define B00000011 3
|
||||
#define B100 4
|
||||
#define B0100 4
|
||||
#define B00100 4
|
||||
#define B000100 4
|
||||
#define B0000100 4
|
||||
#define B00000100 4
|
||||
#define B101 5
|
||||
#define B0101 5
|
||||
#define B00101 5
|
||||
#define B000101 5
|
||||
#define B0000101 5
|
||||
#define B00000101 5
|
||||
#define B110 6
|
||||
#define B0110 6
|
||||
#define B00110 6
|
||||
#define B000110 6
|
||||
#define B0000110 6
|
||||
#define B00000110 6
|
||||
#define B111 7
|
||||
#define B0111 7
|
||||
#define B00111 7
|
||||
#define B000111 7
|
||||
#define B0000111 7
|
||||
#define B00000111 7
|
||||
#define B1000 8
|
||||
#define B01000 8
|
||||
#define B001000 8
|
||||
#define B0001000 8
|
||||
#define B00001000 8
|
||||
#define B1001 9
|
||||
#define B01001 9
|
||||
#define B001001 9
|
||||
#define B0001001 9
|
||||
#define B00001001 9
|
||||
#define B1010 10
|
||||
#define B01010 10
|
||||
#define B001010 10
|
||||
#define B0001010 10
|
||||
#define B00001010 10
|
||||
#define B1011 11
|
||||
#define B01011 11
|
||||
#define B001011 11
|
||||
#define B0001011 11
|
||||
#define B00001011 11
|
||||
#define B1100 12
|
||||
#define B01100 12
|
||||
#define B001100 12
|
||||
#define B0001100 12
|
||||
#define B00001100 12
|
||||
#define B1101 13
|
||||
#define B01101 13
|
||||
#define B001101 13
|
||||
#define B0001101 13
|
||||
#define B00001101 13
|
||||
#define B1110 14
|
||||
#define B01110 14
|
||||
#define B001110 14
|
||||
#define B0001110 14
|
||||
#define B00001110 14
|
||||
#define B1111 15
|
||||
#define B01111 15
|
||||
#define B001111 15
|
||||
#define B0001111 15
|
||||
#define B00001111 15
|
||||
#define B10000 16
|
||||
#define B010000 16
|
||||
#define B0010000 16
|
||||
#define B00010000 16
|
||||
#define B10001 17
|
||||
#define B010001 17
|
||||
#define B0010001 17
|
||||
#define B00010001 17
|
||||
#define B10010 18
|
||||
#define B010010 18
|
||||
#define B0010010 18
|
||||
#define B00010010 18
|
||||
#define B10011 19
|
||||
#define B010011 19
|
||||
#define B0010011 19
|
||||
#define B00010011 19
|
||||
#define B10100 20
|
||||
#define B010100 20
|
||||
#define B0010100 20
|
||||
#define B00010100 20
|
||||
#define B10101 21
|
||||
#define B010101 21
|
||||
#define B0010101 21
|
||||
#define B00010101 21
|
||||
#define B10110 22
|
||||
#define B010110 22
|
||||
#define B0010110 22
|
||||
#define B00010110 22
|
||||
#define B10111 23
|
||||
#define B010111 23
|
||||
#define B0010111 23
|
||||
#define B00010111 23
|
||||
#define B11000 24
|
||||
#define B011000 24
|
||||
#define B0011000 24
|
||||
#define B00011000 24
|
||||
#define B11001 25
|
||||
#define B011001 25
|
||||
#define B0011001 25
|
||||
#define B00011001 25
|
||||
#define B11010 26
|
||||
#define B011010 26
|
||||
#define B0011010 26
|
||||
#define B00011010 26
|
||||
#define B11011 27
|
||||
#define B011011 27
|
||||
#define B0011011 27
|
||||
#define B00011011 27
|
||||
#define B11100 28
|
||||
#define B011100 28
|
||||
#define B0011100 28
|
||||
#define B00011100 28
|
||||
#define B11101 29
|
||||
#define B011101 29
|
||||
#define B0011101 29
|
||||
#define B00011101 29
|
||||
#define B11110 30
|
||||
#define B011110 30
|
||||
#define B0011110 30
|
||||
#define B00011110 30
|
||||
#define B11111 31
|
||||
#define B011111 31
|
||||
#define B0011111 31
|
||||
#define B00011111 31
|
||||
#define B100000 32
|
||||
#define B0100000 32
|
||||
#define B00100000 32
|
||||
#define B100001 33
|
||||
#define B0100001 33
|
||||
#define B00100001 33
|
||||
#define B100010 34
|
||||
#define B0100010 34
|
||||
#define B00100010 34
|
||||
#define B100011 35
|
||||
#define B0100011 35
|
||||
#define B00100011 35
|
||||
#define B100100 36
|
||||
#define B0100100 36
|
||||
#define B00100100 36
|
||||
#define B100101 37
|
||||
#define B0100101 37
|
||||
#define B00100101 37
|
||||
#define B100110 38
|
||||
#define B0100110 38
|
||||
#define B00100110 38
|
||||
#define B100111 39
|
||||
#define B0100111 39
|
||||
#define B00100111 39
|
||||
#define B101000 40
|
||||
#define B0101000 40
|
||||
#define B00101000 40
|
||||
#define B101001 41
|
||||
#define B0101001 41
|
||||
#define B00101001 41
|
||||
#define B101010 42
|
||||
#define B0101010 42
|
||||
#define B00101010 42
|
||||
#define B101011 43
|
||||
#define B0101011 43
|
||||
#define B00101011 43
|
||||
#define B101100 44
|
||||
#define B0101100 44
|
||||
#define B00101100 44
|
||||
#define B101101 45
|
||||
#define B0101101 45
|
||||
#define B00101101 45
|
||||
#define B101110 46
|
||||
#define B0101110 46
|
||||
#define B00101110 46
|
||||
#define B101111 47
|
||||
#define B0101111 47
|
||||
#define B00101111 47
|
||||
#define B110000 48
|
||||
#define B0110000 48
|
||||
#define B00110000 48
|
||||
#define B110001 49
|
||||
#define B0110001 49
|
||||
#define B00110001 49
|
||||
#define B110010 50
|
||||
#define B0110010 50
|
||||
#define B00110010 50
|
||||
#define B110011 51
|
||||
#define B0110011 51
|
||||
#define B00110011 51
|
||||
#define B110100 52
|
||||
#define B0110100 52
|
||||
#define B00110100 52
|
||||
#define B110101 53
|
||||
#define B0110101 53
|
||||
#define B00110101 53
|
||||
#define B110110 54
|
||||
#define B0110110 54
|
||||
#define B00110110 54
|
||||
#define B110111 55
|
||||
#define B0110111 55
|
||||
#define B00110111 55
|
||||
#define B111000 56
|
||||
#define B0111000 56
|
||||
#define B00111000 56
|
||||
#define B111001 57
|
||||
#define B0111001 57
|
||||
#define B00111001 57
|
||||
#define B111010 58
|
||||
#define B0111010 58
|
||||
#define B00111010 58
|
||||
#define B111011 59
|
||||
#define B0111011 59
|
||||
#define B00111011 59
|
||||
#define B111100 60
|
||||
#define B0111100 60
|
||||
#define B00111100 60
|
||||
#define B111101 61
|
||||
#define B0111101 61
|
||||
#define B00111101 61
|
||||
#define B111110 62
|
||||
#define B0111110 62
|
||||
#define B00111110 62
|
||||
#define B111111 63
|
||||
#define B0111111 63
|
||||
#define B00111111 63
|
||||
#define B1000000 64
|
||||
#define B01000000 64
|
||||
#define B1000001 65
|
||||
#define B01000001 65
|
||||
#define B1000010 66
|
||||
#define B01000010 66
|
||||
#define B1000011 67
|
||||
#define B01000011 67
|
||||
#define B1000100 68
|
||||
#define B01000100 68
|
||||
#define B1000101 69
|
||||
#define B01000101 69
|
||||
#define B1000110 70
|
||||
#define B01000110 70
|
||||
#define B1000111 71
|
||||
#define B01000111 71
|
||||
#define B1001000 72
|
||||
#define B01001000 72
|
||||
#define B1001001 73
|
||||
#define B01001001 73
|
||||
#define B1001010 74
|
||||
#define B01001010 74
|
||||
#define B1001011 75
|
||||
#define B01001011 75
|
||||
#define B1001100 76
|
||||
#define B01001100 76
|
||||
#define B1001101 77
|
||||
#define B01001101 77
|
||||
#define B1001110 78
|
||||
#define B01001110 78
|
||||
#define B1001111 79
|
||||
#define B01001111 79
|
||||
#define B1010000 80
|
||||
#define B01010000 80
|
||||
#define B1010001 81
|
||||
#define B01010001 81
|
||||
#define B1010010 82
|
||||
#define B01010010 82
|
||||
#define B1010011 83
|
||||
#define B01010011 83
|
||||
#define B1010100 84
|
||||
#define B01010100 84
|
||||
#define B1010101 85
|
||||
#define B01010101 85
|
||||
#define B1010110 86
|
||||
#define B01010110 86
|
||||
#define B1010111 87
|
||||
#define B01010111 87
|
||||
#define B1011000 88
|
||||
#define B01011000 88
|
||||
#define B1011001 89
|
||||
#define B01011001 89
|
||||
#define B1011010 90
|
||||
#define B01011010 90
|
||||
#define B1011011 91
|
||||
#define B01011011 91
|
||||
#define B1011100 92
|
||||
#define B01011100 92
|
||||
#define B1011101 93
|
||||
#define B01011101 93
|
||||
#define B1011110 94
|
||||
#define B01011110 94
|
||||
#define B1011111 95
|
||||
#define B01011111 95
|
||||
#define B1100000 96
|
||||
#define B01100000 96
|
||||
#define B1100001 97
|
||||
#define B01100001 97
|
||||
#define B1100010 98
|
||||
#define B01100010 98
|
||||
#define B1100011 99
|
||||
#define B01100011 99
|
||||
#define B1100100 100
|
||||
#define B01100100 100
|
||||
#define B1100101 101
|
||||
#define B01100101 101
|
||||
#define B1100110 102
|
||||
#define B01100110 102
|
||||
#define B1100111 103
|
||||
#define B01100111 103
|
||||
#define B1101000 104
|
||||
#define B01101000 104
|
||||
#define B1101001 105
|
||||
#define B01101001 105
|
||||
#define B1101010 106
|
||||
#define B01101010 106
|
||||
#define B1101011 107
|
||||
#define B01101011 107
|
||||
#define B1101100 108
|
||||
#define B01101100 108
|
||||
#define B1101101 109
|
||||
#define B01101101 109
|
||||
#define B1101110 110
|
||||
#define B01101110 110
|
||||
#define B1101111 111
|
||||
#define B01101111 111
|
||||
#define B1110000 112
|
||||
#define B01110000 112
|
||||
#define B1110001 113
|
||||
#define B01110001 113
|
||||
#define B1110010 114
|
||||
#define B01110010 114
|
||||
#define B1110011 115
|
||||
#define B01110011 115
|
||||
#define B1110100 116
|
||||
#define B01110100 116
|
||||
#define B1110101 117
|
||||
#define B01110101 117
|
||||
#define B1110110 118
|
||||
#define B01110110 118
|
||||
#define B1110111 119
|
||||
#define B01110111 119
|
||||
#define B1111000 120
|
||||
#define B01111000 120
|
||||
#define B1111001 121
|
||||
#define B01111001 121
|
||||
#define B1111010 122
|
||||
#define B01111010 122
|
||||
#define B1111011 123
|
||||
#define B01111011 123
|
||||
#define B1111100 124
|
||||
#define B01111100 124
|
||||
#define B1111101 125
|
||||
#define B01111101 125
|
||||
#define B1111110 126
|
||||
#define B01111110 126
|
||||
#define B1111111 127
|
||||
#define B01111111 127
|
||||
#define B10000000 128
|
||||
#define B10000001 129
|
||||
#define B10000010 130
|
||||
#define B10000011 131
|
||||
#define B10000100 132
|
||||
#define B10000101 133
|
||||
#define B10000110 134
|
||||
#define B10000111 135
|
||||
#define B10001000 136
|
||||
#define B10001001 137
|
||||
#define B10001010 138
|
||||
#define B10001011 139
|
||||
#define B10001100 140
|
||||
#define B10001101 141
|
||||
#define B10001110 142
|
||||
#define B10001111 143
|
||||
#define B10010000 144
|
||||
#define B10010001 145
|
||||
#define B10010010 146
|
||||
#define B10010011 147
|
||||
#define B10010100 148
|
||||
#define B10010101 149
|
||||
#define B10010110 150
|
||||
#define B10010111 151
|
||||
#define B10011000 152
|
||||
#define B10011001 153
|
||||
#define B10011010 154
|
||||
#define B10011011 155
|
||||
#define B10011100 156
|
||||
#define B10011101 157
|
||||
#define B10011110 158
|
||||
#define B10011111 159
|
||||
#define B10100000 160
|
||||
#define B10100001 161
|
||||
#define B10100010 162
|
||||
#define B10100011 163
|
||||
#define B10100100 164
|
||||
#define B10100101 165
|
||||
#define B10100110 166
|
||||
#define B10100111 167
|
||||
#define B10101000 168
|
||||
#define B10101001 169
|
||||
#define B10101010 170
|
||||
#define B10101011 171
|
||||
#define B10101100 172
|
||||
#define B10101101 173
|
||||
#define B10101110 174
|
||||
#define B10101111 175
|
||||
#define B10110000 176
|
||||
#define B10110001 177
|
||||
#define B10110010 178
|
||||
#define B10110011 179
|
||||
#define B10110100 180
|
||||
#define B10110101 181
|
||||
#define B10110110 182
|
||||
#define B10110111 183
|
||||
#define B10111000 184
|
||||
#define B10111001 185
|
||||
#define B10111010 186
|
||||
#define B10111011 187
|
||||
#define B10111100 188
|
||||
#define B10111101 189
|
||||
#define B10111110 190
|
||||
#define B10111111 191
|
||||
#define B11000000 192
|
||||
#define B11000001 193
|
||||
#define B11000010 194
|
||||
#define B11000011 195
|
||||
#define B11000100 196
|
||||
#define B11000101 197
|
||||
#define B11000110 198
|
||||
#define B11000111 199
|
||||
#define B11001000 200
|
||||
#define B11001001 201
|
||||
#define B11001010 202
|
||||
#define B11001011 203
|
||||
#define B11001100 204
|
||||
#define B11001101 205
|
||||
#define B11001110 206
|
||||
#define B11001111 207
|
||||
#define B11010000 208
|
||||
#define B11010001 209
|
||||
#define B11010010 210
|
||||
#define B11010011 211
|
||||
#define B11010100 212
|
||||
#define B11010101 213
|
||||
#define B11010110 214
|
||||
#define B11010111 215
|
||||
#define B11011000 216
|
||||
#define B11011001 217
|
||||
#define B11011010 218
|
||||
#define B11011011 219
|
||||
#define B11011100 220
|
||||
#define B11011101 221
|
||||
#define B11011110 222
|
||||
#define B11011111 223
|
||||
#define B11100000 224
|
||||
#define B11100001 225
|
||||
#define B11100010 226
|
||||
#define B11100011 227
|
||||
#define B11100100 228
|
||||
#define B11100101 229
|
||||
#define B11100110 230
|
||||
#define B11100111 231
|
||||
#define B11101000 232
|
||||
#define B11101001 233
|
||||
#define B11101010 234
|
||||
#define B11101011 235
|
||||
#define B11101100 236
|
||||
#define B11101101 237
|
||||
#define B11101110 238
|
||||
#define B11101111 239
|
||||
#define B11110000 240
|
||||
#define B11110001 241
|
||||
#define B11110010 242
|
||||
#define B11110011 243
|
||||
#define B11110100 244
|
||||
#define B11110101 245
|
||||
#define B11110110 246
|
||||
#define B11110111 247
|
||||
#define B11111000 248
|
||||
#define B11111001 249
|
||||
#define B11111010 250
|
||||
#define B11111011 251
|
||||
#define B11111100 252
|
||||
#define B11111101 253
|
||||
#define B11111110 254
|
||||
#define B11111111 255
|
||||
|
||||
#endif
|
||||
@ -0,0 +1,20 @@
|
||||
#include <Arduino.h>
|
||||
|
||||
int main(void)
|
||||
{
|
||||
init();
|
||||
|
||||
#if defined(USBCON)
|
||||
USBDevice.attach();
|
||||
#endif
|
||||
|
||||
setup();
|
||||
|
||||
for (;;) {
|
||||
loop();
|
||||
if (serialEventRun) serialEventRun();
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
@ -0,0 +1,18 @@
|
||||
#include <new.h>
|
||||
|
||||
void * operator new(size_t size)
|
||||
{
|
||||
return malloc(size);
|
||||
}
|
||||
|
||||
void operator delete(void * ptr)
|
||||
{
|
||||
free(ptr);
|
||||
}
|
||||
|
||||
int __cxa_guard_acquire(__guard *g) {return !*(char *)(g);};
|
||||
void __cxa_guard_release (__guard *g) {*(char *)g = 1;};
|
||||
void __cxa_guard_abort (__guard *) {};
|
||||
|
||||
void __cxa_pure_virtual(void) {};
|
||||
|
||||
@ -0,0 +1,22 @@
|
||||
/* Header to define new/delete operators as they aren't provided by avr-gcc by default
|
||||
Taken from http://www.avrfreaks.net/index.php?name=PNphpBB2&file=viewtopic&t=59453
|
||||
*/
|
||||
|
||||
#ifndef NEW_H
|
||||
#define NEW_H
|
||||
|
||||
#include <stdlib.h>
|
||||
|
||||
void * operator new(size_t size);
|
||||
void operator delete(void * ptr);
|
||||
|
||||
__extension__ typedef int __guard __attribute__((mode (__DI__)));
|
||||
|
||||
extern "C" int __cxa_guard_acquire(__guard *);
|
||||
extern "C" void __cxa_guard_release (__guard *);
|
||||
extern "C" void __cxa_guard_abort (__guard *);
|
||||
|
||||
extern "C" void __cxa_pure_virtual(void);
|
||||
|
||||
#endif
|
||||
|
||||
@ -0,0 +1,324 @@
|
||||
/*
|
||||
wiring.c - Partial implementation of the Wiring API for the ATmega8.
|
||||
Part of Arduino - http://www.arduino.cc/
|
||||
|
||||
Copyright (c) 2005-2006 David A. Mellis
|
||||
|
||||
This library is free software; you can redistribute it and/or
|
||||
modify it under the terms of the GNU Lesser General Public
|
||||
License as published by the Free Software Foundation; either
|
||||
version 2.1 of the License, or (at your option) any later version.
|
||||
|
||||
This library is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
||||
Lesser General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU Lesser General
|
||||
Public License along with this library; if not, write to the
|
||||
Free Software Foundation, Inc., 59 Temple Place, Suite 330,
|
||||
Boston, MA 02111-1307 USA
|
||||
|
||||
$Id$
|
||||
*/
|
||||
|
||||
#include "wiring_private.h"
|
||||
|
||||
// the prescaler is set so that timer0 ticks every 64 clock cycles, and the
|
||||
// the overflow handler is called every 256 ticks.
|
||||
#define MICROSECONDS_PER_TIMER0_OVERFLOW (clockCyclesToMicroseconds(64 * 256))
|
||||
|
||||
// the whole number of milliseconds per timer0 overflow
|
||||
#define MILLIS_INC (MICROSECONDS_PER_TIMER0_OVERFLOW / 1000)
|
||||
|
||||
// the fractional number of milliseconds per timer0 overflow. we shift right
|
||||
// by three to fit these numbers into a byte. (for the clock speeds we care
|
||||
// about - 8 and 16 MHz - this doesn't lose precision.)
|
||||
#define FRACT_INC ((MICROSECONDS_PER_TIMER0_OVERFLOW % 1000) >> 3)
|
||||
#define FRACT_MAX (1000 >> 3)
|
||||
|
||||
volatile unsigned long timer0_overflow_count = 0;
|
||||
volatile unsigned long timer0_millis = 0;
|
||||
static unsigned char timer0_fract = 0;
|
||||
|
||||
#if defined(__AVR_ATtiny24__) || defined(__AVR_ATtiny44__) || defined(__AVR_ATtiny84__)
|
||||
SIGNAL(TIM0_OVF_vect)
|
||||
#else
|
||||
SIGNAL(TIMER0_OVF_vect)
|
||||
#endif
|
||||
{
|
||||
// copy these to local variables so they can be stored in registers
|
||||
// (volatile variables must be read from memory on every access)
|
||||
unsigned long m = timer0_millis;
|
||||
unsigned char f = timer0_fract;
|
||||
|
||||
m += MILLIS_INC;
|
||||
f += FRACT_INC;
|
||||
if (f >= FRACT_MAX) {
|
||||
f -= FRACT_MAX;
|
||||
m += 1;
|
||||
}
|
||||
|
||||
timer0_fract = f;
|
||||
timer0_millis = m;
|
||||
timer0_overflow_count++;
|
||||
}
|
||||
|
||||
unsigned long millis()
|
||||
{
|
||||
unsigned long m;
|
||||
uint8_t oldSREG = SREG;
|
||||
|
||||
// disable interrupts while we read timer0_millis or we might get an
|
||||
// inconsistent value (e.g. in the middle of a write to timer0_millis)
|
||||
cli();
|
||||
m = timer0_millis;
|
||||
SREG = oldSREG;
|
||||
|
||||
return m;
|
||||
}
|
||||
|
||||
unsigned long micros() {
|
||||
unsigned long m;
|
||||
uint8_t oldSREG = SREG, t;
|
||||
|
||||
cli();
|
||||
m = timer0_overflow_count;
|
||||
#if defined(TCNT0)
|
||||
t = TCNT0;
|
||||
#elif defined(TCNT0L)
|
||||
t = TCNT0L;
|
||||
#else
|
||||
#error TIMER 0 not defined
|
||||
#endif
|
||||
|
||||
|
||||
#ifdef TIFR0
|
||||
if ((TIFR0 & _BV(TOV0)) && (t < 255))
|
||||
m++;
|
||||
#else
|
||||
if ((TIFR & _BV(TOV0)) && (t < 255))
|
||||
m++;
|
||||
#endif
|
||||
|
||||
SREG = oldSREG;
|
||||
|
||||
return ((m << 8) + t) * (64 / clockCyclesPerMicrosecond());
|
||||
}
|
||||
|
||||
void delay(unsigned long ms)
|
||||
{
|
||||
uint16_t start = (uint16_t)micros();
|
||||
|
||||
while (ms > 0) {
|
||||
if (((uint16_t)micros() - start) >= 1000) {
|
||||
ms--;
|
||||
start += 1000;
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
/* Delay for the given number of microseconds. Assumes a 8 or 16 MHz clock. */
|
||||
void delayMicroseconds(unsigned int us)
|
||||
{
|
||||
// calling avrlib's delay_us() function with low values (e.g. 1 or
|
||||
// 2 microseconds) gives delays longer than desired.
|
||||
//delay_us(us);
|
||||
#if F_CPU >= 20000000L
|
||||
// for the 20 MHz clock on rare Arduino boards
|
||||
|
||||
// for a one-microsecond delay, simply wait 2 cycle and return. The overhead
|
||||
// of the function call yields a delay of exactly a one microsecond.
|
||||
__asm__ __volatile__ (
|
||||
"nop" "\n\t"
|
||||
"nop"); //just waiting 2 cycle
|
||||
if (--us == 0)
|
||||
return;
|
||||
|
||||
// the following loop takes a 1/5 of a microsecond (4 cycles)
|
||||
// per iteration, so execute it five times for each microsecond of
|
||||
// delay requested.
|
||||
us = (us<<2) + us; // x5 us
|
||||
|
||||
// account for the time taken in the preceeding commands.
|
||||
us -= 2;
|
||||
|
||||
#elif F_CPU >= 16000000L
|
||||
// for the 16 MHz clock on most Arduino boards
|
||||
|
||||
// for a one-microsecond delay, simply return. the overhead
|
||||
// of the function call yields a delay of approximately 1 1/8 us.
|
||||
if (--us == 0)
|
||||
return;
|
||||
|
||||
// the following loop takes a quarter of a microsecond (4 cycles)
|
||||
// per iteration, so execute it four times for each microsecond of
|
||||
// delay requested.
|
||||
us <<= 2;
|
||||
|
||||
// account for the time taken in the preceeding commands.
|
||||
us -= 2;
|
||||
#else
|
||||
// for the 8 MHz internal clock on the ATmega168
|
||||
|
||||
// for a one- or two-microsecond delay, simply return. the overhead of
|
||||
// the function calls takes more than two microseconds. can't just
|
||||
// subtract two, since us is unsigned; we'd overflow.
|
||||
if (--us == 0)
|
||||
return;
|
||||
if (--us == 0)
|
||||
return;
|
||||
|
||||
// the following loop takes half of a microsecond (4 cycles)
|
||||
// per iteration, so execute it twice for each microsecond of
|
||||
// delay requested.
|
||||
us <<= 1;
|
||||
|
||||
// partially compensate for the time taken by the preceeding commands.
|
||||
// we can't subtract any more than this or we'd overflow w/ small delays.
|
||||
us--;
|
||||
#endif
|
||||
|
||||
// busy wait
|
||||
__asm__ __volatile__ (
|
||||
"1: sbiw %0,1" "\n\t" // 2 cycles
|
||||
"brne 1b" : "=w" (us) : "0" (us) // 2 cycles
|
||||
);
|
||||
}
|
||||
|
||||
void init()
|
||||
{
|
||||
// this needs to be called before setup() or some functions won't
|
||||
// work there
|
||||
sei();
|
||||
|
||||
// on the ATmega168, timer 0 is also used for fast hardware pwm
|
||||
// (using phase-correct PWM would mean that timer 0 overflowed half as often
|
||||
// resulting in different millis() behavior on the ATmega8 and ATmega168)
|
||||
#if defined(TCCR0A) && defined(WGM01)
|
||||
sbi(TCCR0A, WGM01);
|
||||
sbi(TCCR0A, WGM00);
|
||||
#endif
|
||||
|
||||
// set timer 0 prescale factor to 64
|
||||
#if defined(__AVR_ATmega128__)
|
||||
// CPU specific: different values for the ATmega128
|
||||
sbi(TCCR0, CS02);
|
||||
#elif defined(TCCR0) && defined(CS01) && defined(CS00)
|
||||
// this combination is for the standard atmega8
|
||||
sbi(TCCR0, CS01);
|
||||
sbi(TCCR0, CS00);
|
||||
#elif defined(TCCR0B) && defined(CS01) && defined(CS00)
|
||||
// this combination is for the standard 168/328/1280/2560
|
||||
sbi(TCCR0B, CS01);
|
||||
sbi(TCCR0B, CS00);
|
||||
#elif defined(TCCR0A) && defined(CS01) && defined(CS00)
|
||||
// this combination is for the __AVR_ATmega645__ series
|
||||
sbi(TCCR0A, CS01);
|
||||
sbi(TCCR0A, CS00);
|
||||
#else
|
||||
#error Timer 0 prescale factor 64 not set correctly
|
||||
#endif
|
||||
|
||||
// enable timer 0 overflow interrupt
|
||||
#if defined(TIMSK) && defined(TOIE0)
|
||||
sbi(TIMSK, TOIE0);
|
||||
#elif defined(TIMSK0) && defined(TOIE0)
|
||||
sbi(TIMSK0, TOIE0);
|
||||
#else
|
||||
#error Timer 0 overflow interrupt not set correctly
|
||||
#endif
|
||||
|
||||
// timers 1 and 2 are used for phase-correct hardware pwm
|
||||
// this is better for motors as it ensures an even waveform
|
||||
// note, however, that fast pwm mode can achieve a frequency of up
|
||||
// 8 MHz (with a 16 MHz clock) at 50% duty cycle
|
||||
|
||||
#if defined(TCCR1B) && defined(CS11) && defined(CS10)
|
||||
TCCR1B = 0;
|
||||
|
||||
// set timer 1 prescale factor to 64
|
||||
sbi(TCCR1B, CS11);
|
||||
#if F_CPU >= 8000000L
|
||||
sbi(TCCR1B, CS10);
|
||||
#endif
|
||||
#elif defined(TCCR1) && defined(CS11) && defined(CS10)
|
||||
sbi(TCCR1, CS11);
|
||||
#if F_CPU >= 8000000L
|
||||
sbi(TCCR1, CS10);
|
||||
#endif
|
||||
#endif
|
||||
// put timer 1 in 8-bit phase correct pwm mode
|
||||
#if defined(TCCR1A) && defined(WGM10)
|
||||
sbi(TCCR1A, WGM10);
|
||||
#elif defined(TCCR1)
|
||||
#warning this needs to be finished
|
||||
#endif
|
||||
|
||||
// set timer 2 prescale factor to 64
|
||||
#if defined(TCCR2) && defined(CS22)
|
||||
sbi(TCCR2, CS22);
|
||||
#elif defined(TCCR2B) && defined(CS22)
|
||||
sbi(TCCR2B, CS22);
|
||||
#else
|
||||
#warning Timer 2 not finished (may not be present on this CPU)
|
||||
#endif
|
||||
|
||||
// configure timer 2 for phase correct pwm (8-bit)
|
||||
#if defined(TCCR2) && defined(WGM20)
|
||||
sbi(TCCR2, WGM20);
|
||||
#elif defined(TCCR2A) && defined(WGM20)
|
||||
sbi(TCCR2A, WGM20);
|
||||
#else
|
||||
#warning Timer 2 not finished (may not be present on this CPU)
|
||||
#endif
|
||||
|
||||
#if defined(TCCR3B) && defined(CS31) && defined(WGM30)
|
||||
sbi(TCCR3B, CS31); // set timer 3 prescale factor to 64
|
||||
sbi(TCCR3B, CS30);
|
||||
sbi(TCCR3A, WGM30); // put timer 3 in 8-bit phase correct pwm mode
|
||||
#endif
|
||||
|
||||
#if defined(TCCR4A) && defined(TCCR4B) && defined(TCCR4D) /* beginning of timer4 block for 32U4 and similar */
|
||||
sbi(TCCR4B, CS42); // set timer4 prescale factor to 64
|
||||
sbi(TCCR4B, CS41);
|
||||
sbi(TCCR4B, CS40);
|
||||
sbi(TCCR4D, WGM40); // put timer 4 in phase- and frequency-correct PWM mode
|
||||
sbi(TCCR4A, PWM4A); // enable PWM mode for comparator OCR4A
|
||||
sbi(TCCR4C, PWM4D); // enable PWM mode for comparator OCR4D
|
||||
#else /* beginning of timer4 block for ATMEGA1280 and ATMEGA2560 */
|
||||
#if defined(TCCR4B) && defined(CS41) && defined(WGM40)
|
||||
sbi(TCCR4B, CS41); // set timer 4 prescale factor to 64
|
||||
sbi(TCCR4B, CS40);
|
||||
sbi(TCCR4A, WGM40); // put timer 4 in 8-bit phase correct pwm mode
|
||||
#endif
|
||||
#endif /* end timer4 block for ATMEGA1280/2560 and similar */
|
||||
|
||||
#if defined(TCCR5B) && defined(CS51) && defined(WGM50)
|
||||
sbi(TCCR5B, CS51); // set timer 5 prescale factor to 64
|
||||
sbi(TCCR5B, CS50);
|
||||
sbi(TCCR5A, WGM50); // put timer 5 in 8-bit phase correct pwm mode
|
||||
#endif
|
||||
|
||||
#if defined(ADCSRA)
|
||||
// set a2d prescale factor to 128
|
||||
// 16 MHz / 128 = 125 KHz, inside the desired 50-200 KHz range.
|
||||
// XXX: this will not work properly for other clock speeds, and
|
||||
// this code should use F_CPU to determine the prescale factor.
|
||||
sbi(ADCSRA, ADPS2);
|
||||
sbi(ADCSRA, ADPS1);
|
||||
sbi(ADCSRA, ADPS0);
|
||||
|
||||
// enable a2d conversions
|
||||
sbi(ADCSRA, ADEN);
|
||||
#endif
|
||||
|
||||
// the bootloader connects pins 0 and 1 to the USART; disconnect them
|
||||
// here so they can be used as normal digital i/o; they will be
|
||||
// reconnected in Serial.begin()
|
||||
#if defined(UCSRB)
|
||||
UCSRB = 0;
|
||||
#elif defined(UCSR0B)
|
||||
UCSR0B = 0;
|
||||
#endif
|
||||
}
|
||||
@ -0,0 +1,282 @@
|
||||
/*
|
||||
wiring_analog.c - analog input and output
|
||||
Part of Arduino - http://www.arduino.cc/
|
||||
|
||||
Copyright (c) 2005-2006 David A. Mellis
|
||||
|
||||
This library is free software; you can redistribute it and/or
|
||||
modify it under the terms of the GNU Lesser General Public
|
||||
License as published by the Free Software Foundation; either
|
||||
version 2.1 of the License, or (at your option) any later version.
|
||||
|
||||
This library is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
||||
Lesser General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU Lesser General
|
||||
Public License along with this library; if not, write to the
|
||||
Free Software Foundation, Inc., 59 Temple Place, Suite 330,
|
||||
Boston, MA 02111-1307 USA
|
||||
|
||||
Modified 28 September 2010 by Mark Sproul
|
||||
|
||||
$Id: wiring.c 248 2007-02-03 15:36:30Z mellis $
|
||||
*/
|
||||
|
||||
#include "wiring_private.h"
|
||||
#include "pins_arduino.h"
|
||||
|
||||
uint8_t analog_reference = DEFAULT;
|
||||
|
||||
void analogReference(uint8_t mode)
|
||||
{
|
||||
// can't actually set the register here because the default setting
|
||||
// will connect AVCC and the AREF pin, which would cause a short if
|
||||
// there's something connected to AREF.
|
||||
analog_reference = mode;
|
||||
}
|
||||
|
||||
int analogRead(uint8_t pin)
|
||||
{
|
||||
uint8_t low, high;
|
||||
|
||||
#if defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__)
|
||||
if (pin >= 54) pin -= 54; // allow for channel or pin numbers
|
||||
#elif defined(__AVR_ATmega32U4__)
|
||||
if (pin >= 18) pin -= 18; // allow for channel or pin numbers
|
||||
#elif defined(__AVR_ATmega1284P__) || defined(__AVR_ATmega644P__)
|
||||
if (pin >= 24) pin -= 24; // allow for channel or pin numbers
|
||||
#else
|
||||
if (pin >= 14) pin -= 14; // allow for channel or pin numbers
|
||||
#endif
|
||||
|
||||
#if defined(__AVR_ATmega32U4__)
|
||||
pin = analogPinToChannel(pin);
|
||||
ADCSRB = (ADCSRB & ~(1 << MUX5)) | (((pin >> 3) & 0x01) << MUX5);
|
||||
#elif defined(ADCSRB) && defined(MUX5)
|
||||
// the MUX5 bit of ADCSRB selects whether we're reading from channels
|
||||
// 0 to 7 (MUX5 low) or 8 to 15 (MUX5 high).
|
||||
ADCSRB = (ADCSRB & ~(1 << MUX5)) | (((pin >> 3) & 0x01) << MUX5);
|
||||
#endif
|
||||
|
||||
// set the analog reference (high two bits of ADMUX) and select the
|
||||
// channel (low 4 bits). this also sets ADLAR (left-adjust result)
|
||||
// to 0 (the default).
|
||||
#if defined(ADMUX)
|
||||
ADMUX = (analog_reference << 6) | (pin & 0x07);
|
||||
#endif
|
||||
|
||||
// without a delay, we seem to read from the wrong channel
|
||||
//delay(1);
|
||||
|
||||
#if defined(ADCSRA) && defined(ADCL)
|
||||
// start the conversion
|
||||
sbi(ADCSRA, ADSC);
|
||||
|
||||
// ADSC is cleared when the conversion finishes
|
||||
while (bit_is_set(ADCSRA, ADSC));
|
||||
|
||||
// we have to read ADCL first; doing so locks both ADCL
|
||||
// and ADCH until ADCH is read. reading ADCL second would
|
||||
// cause the results of each conversion to be discarded,
|
||||
// as ADCL and ADCH would be locked when it completed.
|
||||
low = ADCL;
|
||||
high = ADCH;
|
||||
#else
|
||||
// we dont have an ADC, return 0
|
||||
low = 0;
|
||||
high = 0;
|
||||
#endif
|
||||
|
||||
// combine the two bytes
|
||||
return (high << 8) | low;
|
||||
}
|
||||
|
||||
// Right now, PWM output only works on the pins with
|
||||
// hardware support. These are defined in the appropriate
|
||||
// pins_*.c file. For the rest of the pins, we default
|
||||
// to digital output.
|
||||
void analogWrite(uint8_t pin, int val)
|
||||
{
|
||||
// We need to make sure the PWM output is enabled for those pins
|
||||
// that support it, as we turn it off when digitally reading or
|
||||
// writing with them. Also, make sure the pin is in output mode
|
||||
// for consistenty with Wiring, which doesn't require a pinMode
|
||||
// call for the analog output pins.
|
||||
pinMode(pin, OUTPUT);
|
||||
if (val == 0)
|
||||
{
|
||||
digitalWrite(pin, LOW);
|
||||
}
|
||||
else if (val == 255)
|
||||
{
|
||||
digitalWrite(pin, HIGH);
|
||||
}
|
||||
else
|
||||
{
|
||||
switch(digitalPinToTimer(pin))
|
||||
{
|
||||
// XXX fix needed for atmega8
|
||||
#if defined(TCCR0) && defined(COM00) && !defined(__AVR_ATmega8__)
|
||||
case TIMER0A:
|
||||
// connect pwm to pin on timer 0
|
||||
sbi(TCCR0, COM00);
|
||||
OCR0 = val; // set pwm duty
|
||||
break;
|
||||
#endif
|
||||
|
||||
#if defined(TCCR0A) && defined(COM0A1)
|
||||
case TIMER0A:
|
||||
// connect pwm to pin on timer 0, channel A
|
||||
sbi(TCCR0A, COM0A1);
|
||||
OCR0A = val; // set pwm duty
|
||||
break;
|
||||
#endif
|
||||
|
||||
#if defined(TCCR0A) && defined(COM0B1)
|
||||
case TIMER0B:
|
||||
// connect pwm to pin on timer 0, channel B
|
||||
sbi(TCCR0A, COM0B1);
|
||||
OCR0B = val; // set pwm duty
|
||||
break;
|
||||
#endif
|
||||
|
||||
#if defined(TCCR1A) && defined(COM1A1)
|
||||
case TIMER1A:
|
||||
// connect pwm to pin on timer 1, channel A
|
||||
sbi(TCCR1A, COM1A1);
|
||||
OCR1A = val; // set pwm duty
|
||||
break;
|
||||
#endif
|
||||
|
||||
#if defined(TCCR1A) && defined(COM1B1)
|
||||
case TIMER1B:
|
||||
// connect pwm to pin on timer 1, channel B
|
||||
sbi(TCCR1A, COM1B1);
|
||||
OCR1B = val; // set pwm duty
|
||||
break;
|
||||
#endif
|
||||
|
||||
#if defined(TCCR2) && defined(COM21)
|
||||
case TIMER2:
|
||||
// connect pwm to pin on timer 2
|
||||
sbi(TCCR2, COM21);
|
||||
OCR2 = val; // set pwm duty
|
||||
break;
|
||||
#endif
|
||||
|
||||
#if defined(TCCR2A) && defined(COM2A1)
|
||||
case TIMER2A:
|
||||
// connect pwm to pin on timer 2, channel A
|
||||
sbi(TCCR2A, COM2A1);
|
||||
OCR2A = val; // set pwm duty
|
||||
break;
|
||||
#endif
|
||||
|
||||
#if defined(TCCR2A) && defined(COM2B1)
|
||||
case TIMER2B:
|
||||
// connect pwm to pin on timer 2, channel B
|
||||
sbi(TCCR2A, COM2B1);
|
||||
OCR2B = val; // set pwm duty
|
||||
break;
|
||||
#endif
|
||||
|
||||
#if defined(TCCR3A) && defined(COM3A1)
|
||||
case TIMER3A:
|
||||
// connect pwm to pin on timer 3, channel A
|
||||
sbi(TCCR3A, COM3A1);
|
||||
OCR3A = val; // set pwm duty
|
||||
break;
|
||||
#endif
|
||||
|
||||
#if defined(TCCR3A) && defined(COM3B1)
|
||||
case TIMER3B:
|
||||
// connect pwm to pin on timer 3, channel B
|
||||
sbi(TCCR3A, COM3B1);
|
||||
OCR3B = val; // set pwm duty
|
||||
break;
|
||||
#endif
|
||||
|
||||
#if defined(TCCR3A) && defined(COM3C1)
|
||||
case TIMER3C:
|
||||
// connect pwm to pin on timer 3, channel C
|
||||
sbi(TCCR3A, COM3C1);
|
||||
OCR3C = val; // set pwm duty
|
||||
break;
|
||||
#endif
|
||||
|
||||
#if defined(TCCR4A)
|
||||
case TIMER4A:
|
||||
//connect pwm to pin on timer 4, channel A
|
||||
sbi(TCCR4A, COM4A1);
|
||||
#if defined(COM4A0) // only used on 32U4
|
||||
cbi(TCCR4A, COM4A0);
|
||||
#endif
|
||||
OCR4A = val; // set pwm duty
|
||||
break;
|
||||
#endif
|
||||
|
||||
#if defined(TCCR4A) && defined(COM4B1)
|
||||
case TIMER4B:
|
||||
// connect pwm to pin on timer 4, channel B
|
||||
sbi(TCCR4A, COM4B1);
|
||||
OCR4B = val; // set pwm duty
|
||||
break;
|
||||
#endif
|
||||
|
||||
#if defined(TCCR4A) && defined(COM4C1)
|
||||
case TIMER4C:
|
||||
// connect pwm to pin on timer 4, channel C
|
||||
sbi(TCCR4A, COM4C1);
|
||||
OCR4C = val; // set pwm duty
|
||||
break;
|
||||
#endif
|
||||
|
||||
#if defined(TCCR4C) && defined(COM4D1)
|
||||
case TIMER4D:
|
||||
// connect pwm to pin on timer 4, channel D
|
||||
sbi(TCCR4C, COM4D1);
|
||||
#if defined(COM4D0) // only used on 32U4
|
||||
cbi(TCCR4C, COM4D0);
|
||||
#endif
|
||||
OCR4D = val; // set pwm duty
|
||||
break;
|
||||
#endif
|
||||
|
||||
|
||||
#if defined(TCCR5A) && defined(COM5A1)
|
||||
case TIMER5A:
|
||||
// connect pwm to pin on timer 5, channel A
|
||||
sbi(TCCR5A, COM5A1);
|
||||
OCR5A = val; // set pwm duty
|
||||
break;
|
||||
#endif
|
||||
|
||||
#if defined(TCCR5A) && defined(COM5B1)
|
||||
case TIMER5B:
|
||||
// connect pwm to pin on timer 5, channel B
|
||||
sbi(TCCR5A, COM5B1);
|
||||
OCR5B = val; // set pwm duty
|
||||
break;
|
||||
#endif
|
||||
|
||||
#if defined(TCCR5A) && defined(COM5C1)
|
||||
case TIMER5C:
|
||||
// connect pwm to pin on timer 5, channel C
|
||||
sbi(TCCR5A, COM5C1);
|
||||
OCR5C = val; // set pwm duty
|
||||
break;
|
||||
#endif
|
||||
|
||||
case NOT_ON_TIMER:
|
||||
default:
|
||||
if (val < 128) {
|
||||
digitalWrite(pin, LOW);
|
||||
} else {
|
||||
digitalWrite(pin, HIGH);
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
@ -0,0 +1,178 @@
|
||||
/*
|
||||
wiring_digital.c - digital input and output functions
|
||||
Part of Arduino - http://www.arduino.cc/
|
||||
|
||||
Copyright (c) 2005-2006 David A. Mellis
|
||||
|
||||
This library is free software; you can redistribute it and/or
|
||||
modify it under the terms of the GNU Lesser General Public
|
||||
License as published by the Free Software Foundation; either
|
||||
version 2.1 of the License, or (at your option) any later version.
|
||||
|
||||
This library is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
||||
Lesser General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU Lesser General
|
||||
Public License along with this library; if not, write to the
|
||||
Free Software Foundation, Inc., 59 Temple Place, Suite 330,
|
||||
Boston, MA 02111-1307 USA
|
||||
|
||||
Modified 28 September 2010 by Mark Sproul
|
||||
|
||||
$Id: wiring.c 248 2007-02-03 15:36:30Z mellis $
|
||||
*/
|
||||
|
||||
#define ARDUINO_MAIN
|
||||
#include "wiring_private.h"
|
||||
#include "pins_arduino.h"
|
||||
|
||||
void pinMode(uint8_t pin, uint8_t mode)
|
||||
{
|
||||
uint8_t bit = digitalPinToBitMask(pin);
|
||||
uint8_t port = digitalPinToPort(pin);
|
||||
volatile uint8_t *reg, *out;
|
||||
|
||||
if (port == NOT_A_PIN) return;
|
||||
|
||||
// JWS: can I let the optimizer do this?
|
||||
reg = portModeRegister(port);
|
||||
out = portOutputRegister(port);
|
||||
|
||||
if (mode == INPUT) {
|
||||
uint8_t oldSREG = SREG;
|
||||
cli();
|
||||
*reg &= ~bit;
|
||||
*out &= ~bit;
|
||||
SREG = oldSREG;
|
||||
} else if (mode == INPUT_PULLUP) {
|
||||
uint8_t oldSREG = SREG;
|
||||
cli();
|
||||
*reg &= ~bit;
|
||||
*out |= bit;
|
||||
SREG = oldSREG;
|
||||
} else {
|
||||
uint8_t oldSREG = SREG;
|
||||
cli();
|
||||
*reg |= bit;
|
||||
SREG = oldSREG;
|
||||
}
|
||||
}
|
||||
|
||||
// Forcing this inline keeps the callers from having to push their own stuff
|
||||
// on the stack. It is a good performance win and only takes 1 more byte per
|
||||
// user than calling. (It will take more bytes on the 168.)
|
||||
//
|
||||
// But shouldn't this be moved into pinMode? Seems silly to check and do on
|
||||
// each digitalread or write.
|
||||
//
|
||||
// Mark Sproul:
|
||||
// - Removed inline. Save 170 bytes on atmega1280
|
||||
// - changed to a switch statment; added 32 bytes but much easier to read and maintain.
|
||||
// - Added more #ifdefs, now compiles for atmega645
|
||||
//
|
||||
//static inline void turnOffPWM(uint8_t timer) __attribute__ ((always_inline));
|
||||
//static inline void turnOffPWM(uint8_t timer)
|
||||
static void turnOffPWM(uint8_t timer)
|
||||
{
|
||||
switch (timer)
|
||||
{
|
||||
#if defined(TCCR1A) && defined(COM1A1)
|
||||
case TIMER1A: cbi(TCCR1A, COM1A1); break;
|
||||
#endif
|
||||
#if defined(TCCR1A) && defined(COM1B1)
|
||||
case TIMER1B: cbi(TCCR1A, COM1B1); break;
|
||||
#endif
|
||||
|
||||
#if defined(TCCR2) && defined(COM21)
|
||||
case TIMER2: cbi(TCCR2, COM21); break;
|
||||
#endif
|
||||
|
||||
#if defined(TCCR0A) && defined(COM0A1)
|
||||
case TIMER0A: cbi(TCCR0A, COM0A1); break;
|
||||
#endif
|
||||
|
||||
#if defined(TIMER0B) && defined(COM0B1)
|
||||
case TIMER0B: cbi(TCCR0A, COM0B1); break;
|
||||
#endif
|
||||
#if defined(TCCR2A) && defined(COM2A1)
|
||||
case TIMER2A: cbi(TCCR2A, COM2A1); break;
|
||||
#endif
|
||||
#if defined(TCCR2A) && defined(COM2B1)
|
||||
case TIMER2B: cbi(TCCR2A, COM2B1); break;
|
||||
#endif
|
||||
|
||||
#if defined(TCCR3A) && defined(COM3A1)
|
||||
case TIMER3A: cbi(TCCR3A, COM3A1); break;
|
||||
#endif
|
||||
#if defined(TCCR3A) && defined(COM3B1)
|
||||
case TIMER3B: cbi(TCCR3A, COM3B1); break;
|
||||
#endif
|
||||
#if defined(TCCR3A) && defined(COM3C1)
|
||||
case TIMER3C: cbi(TCCR3A, COM3C1); break;
|
||||
#endif
|
||||
|
||||
#if defined(TCCR4A) && defined(COM4A1)
|
||||
case TIMER4A: cbi(TCCR4A, COM4A1); break;
|
||||
#endif
|
||||
#if defined(TCCR4A) && defined(COM4B1)
|
||||
case TIMER4B: cbi(TCCR4A, COM4B1); break;
|
||||
#endif
|
||||
#if defined(TCCR4A) && defined(COM4C1)
|
||||
case TIMER4C: cbi(TCCR4A, COM4C1); break;
|
||||
#endif
|
||||
#if defined(TCCR4C) && defined(COM4D1)
|
||||
case TIMER4D: cbi(TCCR4C, COM4D1); break;
|
||||
#endif
|
||||
|
||||
#if defined(TCCR5A)
|
||||
case TIMER5A: cbi(TCCR5A, COM5A1); break;
|
||||
case TIMER5B: cbi(TCCR5A, COM5B1); break;
|
||||
case TIMER5C: cbi(TCCR5A, COM5C1); break;
|
||||
#endif
|
||||
}
|
||||
}
|
||||
|
||||
void digitalWrite(uint8_t pin, uint8_t val)
|
||||
{
|
||||
uint8_t timer = digitalPinToTimer(pin);
|
||||
uint8_t bit = digitalPinToBitMask(pin);
|
||||
uint8_t port = digitalPinToPort(pin);
|
||||
volatile uint8_t *out;
|
||||
|
||||
if (port == NOT_A_PIN) return;
|
||||
|
||||
// If the pin that support PWM output, we need to turn it off
|
||||
// before doing a digital write.
|
||||
if (timer != NOT_ON_TIMER) turnOffPWM(timer);
|
||||
|
||||
out = portOutputRegister(port);
|
||||
|
||||
uint8_t oldSREG = SREG;
|
||||
cli();
|
||||
|
||||
if (val == LOW) {
|
||||
*out &= ~bit;
|
||||
} else {
|
||||
*out |= bit;
|
||||
}
|
||||
|
||||
SREG = oldSREG;
|
||||
}
|
||||
|
||||
int digitalRead(uint8_t pin)
|
||||
{
|
||||
uint8_t timer = digitalPinToTimer(pin);
|
||||
uint8_t bit = digitalPinToBitMask(pin);
|
||||
uint8_t port = digitalPinToPort(pin);
|
||||
|
||||
if (port == NOT_A_PIN) return LOW;
|
||||
|
||||
// If the pin that support PWM output, we need to turn it off
|
||||
// before getting a digital reading.
|
||||
if (timer != NOT_ON_TIMER) turnOffPWM(timer);
|
||||
|
||||
if (*portInputRegister(port) & bit) return HIGH;
|
||||
return LOW;
|
||||
}
|
||||
@ -0,0 +1,71 @@
|
||||
/*
|
||||
wiring_private.h - Internal header file.
|
||||
Part of Arduino - http://www.arduino.cc/
|
||||
|
||||
Copyright (c) 2005-2006 David A. Mellis
|
||||
|
||||
This library is free software; you can redistribute it and/or
|
||||
modify it under the terms of the GNU Lesser General Public
|
||||
License as published by the Free Software Foundation; either
|
||||
version 2.1 of the License, or (at your option) any later version.
|
||||
|
||||
This library is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
||||
Lesser General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU Lesser General
|
||||
Public License along with this library; if not, write to the
|
||||
Free Software Foundation, Inc., 59 Temple Place, Suite 330,
|
||||
Boston, MA 02111-1307 USA
|
||||
|
||||
$Id: wiring.h 239 2007-01-12 17:58:39Z mellis $
|
||||
*/
|
||||
|
||||
#ifndef WiringPrivate_h
|
||||
#define WiringPrivate_h
|
||||
|
||||
#include <avr/io.h>
|
||||
#include <avr/interrupt.h>
|
||||
#include <stdio.h>
|
||||
#include <stdarg.h>
|
||||
|
||||
#include "Arduino.h"
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C"{
|
||||
#endif
|
||||
|
||||
#ifndef cbi
|
||||
#define cbi(sfr, bit) (_SFR_BYTE(sfr) &= ~_BV(bit))
|
||||
#endif
|
||||
#ifndef sbi
|
||||
#define sbi(sfr, bit) (_SFR_BYTE(sfr) |= _BV(bit))
|
||||
#endif
|
||||
|
||||
#define EXTERNAL_INT_0 0
|
||||
#define EXTERNAL_INT_1 1
|
||||
#define EXTERNAL_INT_2 2
|
||||
#define EXTERNAL_INT_3 3
|
||||
#define EXTERNAL_INT_4 4
|
||||
#define EXTERNAL_INT_5 5
|
||||
#define EXTERNAL_INT_6 6
|
||||
#define EXTERNAL_INT_7 7
|
||||
|
||||
#if defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__)
|
||||
#define EXTERNAL_NUM_INTERRUPTS 8
|
||||
#elif defined(__AVR_ATmega1284P__) || defined(__AVR_ATmega644P__)
|
||||
#define EXTERNAL_NUM_INTERRUPTS 3
|
||||
#elif defined(__AVR_ATmega32U4__)
|
||||
#define EXTERNAL_NUM_INTERRUPTS 4
|
||||
#else
|
||||
#define EXTERNAL_NUM_INTERRUPTS 2
|
||||
#endif
|
||||
|
||||
typedef void (*voidFuncPtr)(void);
|
||||
|
||||
#ifdef __cplusplus
|
||||
} // extern "C"
|
||||
#endif
|
||||
|
||||
#endif
|
||||
@ -0,0 +1,69 @@
|
||||
/*
|
||||
wiring_pulse.c - pulseIn() function
|
||||
Part of Arduino - http://www.arduino.cc/
|
||||
|
||||
Copyright (c) 2005-2006 David A. Mellis
|
||||
|
||||
This library is free software; you can redistribute it and/or
|
||||
modify it under the terms of the GNU Lesser General Public
|
||||
License as published by the Free Software Foundation; either
|
||||
version 2.1 of the License, or (at your option) any later version.
|
||||
|
||||
This library is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
||||
Lesser General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU Lesser General
|
||||
Public License along with this library; if not, write to the
|
||||
Free Software Foundation, Inc., 59 Temple Place, Suite 330,
|
||||
Boston, MA 02111-1307 USA
|
||||
|
||||
$Id: wiring.c 248 2007-02-03 15:36:30Z mellis $
|
||||
*/
|
||||
|
||||
#include "wiring_private.h"
|
||||
#include "pins_arduino.h"
|
||||
|
||||
/* Measures the length (in microseconds) of a pulse on the pin; state is HIGH
|
||||
* or LOW, the type of pulse to measure. Works on pulses from 2-3 microseconds
|
||||
* to 3 minutes in length, but must be called at least a few dozen microseconds
|
||||
* before the start of the pulse. */
|
||||
unsigned long pulseIn(uint8_t pin, uint8_t state, unsigned long timeout)
|
||||
{
|
||||
// cache the port and bit of the pin in order to speed up the
|
||||
// pulse width measuring loop and achieve finer resolution. calling
|
||||
// digitalRead() instead yields much coarser resolution.
|
||||
uint8_t bit = digitalPinToBitMask(pin);
|
||||
uint8_t port = digitalPinToPort(pin);
|
||||
uint8_t stateMask = (state ? bit : 0);
|
||||
unsigned long width = 0; // keep initialization out of time critical area
|
||||
|
||||
// convert the timeout from microseconds to a number of times through
|
||||
// the initial loop; it takes 16 clock cycles per iteration.
|
||||
unsigned long numloops = 0;
|
||||
unsigned long maxloops = microsecondsToClockCycles(timeout) / 16;
|
||||
|
||||
// wait for any previous pulse to end
|
||||
while ((*portInputRegister(port) & bit) == stateMask)
|
||||
if (numloops++ == maxloops)
|
||||
return 0;
|
||||
|
||||
// wait for the pulse to start
|
||||
while ((*portInputRegister(port) & bit) != stateMask)
|
||||
if (numloops++ == maxloops)
|
||||
return 0;
|
||||
|
||||
// wait for the pulse to stop
|
||||
while ((*portInputRegister(port) & bit) == stateMask) {
|
||||
if (numloops++ == maxloops)
|
||||
return 0;
|
||||
width++;
|
||||
}
|
||||
|
||||
// convert the reading to microseconds. The loop has been determined
|
||||
// to be 20 clock cycles long and have about 16 clocks between the edge
|
||||
// and the start of the loop. There will be some error introduced by
|
||||
// the interrupt handlers.
|
||||
return clockCyclesToMicroseconds(width * 21 + 16);
|
||||
}
|
||||
@ -0,0 +1,55 @@
|
||||
/*
|
||||
wiring_shift.c - shiftOut() function
|
||||
Part of Arduino - http://www.arduino.cc/
|
||||
|
||||
Copyright (c) 2005-2006 David A. Mellis
|
||||
|
||||
This library is free software; you can redistribute it and/or
|
||||
modify it under the terms of the GNU Lesser General Public
|
||||
License as published by the Free Software Foundation; either
|
||||
version 2.1 of the License, or (at your option) any later version.
|
||||
|
||||
This library is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
||||
Lesser General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU Lesser General
|
||||
Public License along with this library; if not, write to the
|
||||
Free Software Foundation, Inc., 59 Temple Place, Suite 330,
|
||||
Boston, MA 02111-1307 USA
|
||||
|
||||
$Id: wiring.c 248 2007-02-03 15:36:30Z mellis $
|
||||
*/
|
||||
|
||||
#include "wiring_private.h"
|
||||
|
||||
uint8_t shiftIn(uint8_t dataPin, uint8_t clockPin, uint8_t bitOrder) {
|
||||
uint8_t value = 0;
|
||||
uint8_t i;
|
||||
|
||||
for (i = 0; i < 8; ++i) {
|
||||
digitalWrite(clockPin, HIGH);
|
||||
if (bitOrder == LSBFIRST)
|
||||
value |= digitalRead(dataPin) << i;
|
||||
else
|
||||
value |= digitalRead(dataPin) << (7 - i);
|
||||
digitalWrite(clockPin, LOW);
|
||||
}
|
||||
return value;
|
||||
}
|
||||
|
||||
void shiftOut(uint8_t dataPin, uint8_t clockPin, uint8_t bitOrder, uint8_t val)
|
||||
{
|
||||
uint8_t i;
|
||||
|
||||
for (i = 0; i < 8; i++) {
|
||||
if (bitOrder == LSBFIRST)
|
||||
digitalWrite(dataPin, !!(val & (1 << i)));
|
||||
else
|
||||
digitalWrite(dataPin, !!(val & (1 << (7 - i))));
|
||||
|
||||
digitalWrite(clockPin, HIGH);
|
||||
digitalWrite(clockPin, LOW);
|
||||
}
|
||||
}
|
||||
@ -0,0 +1,411 @@
|
||||
/*
|
||||
pins_arduino.h - Pin definition functions for Arduino
|
||||
Part of Arduino - http://www.arduino.cc/
|
||||
|
||||
Copyright (c) 2007 David A. Mellis
|
||||
|
||||
This library is free software; you can redistribute it and/or
|
||||
modify it under the terms of the GNU Lesser General Public
|
||||
License as published by the Free Software Foundation; either
|
||||
version 2.1 of the License, or (at your option) any later version.
|
||||
|
||||
This library is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
||||
Lesser General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU Lesser General
|
||||
Public License along with this library; if not, write to the
|
||||
Free Software Foundation, Inc., 59 Temple Place, Suite 330,
|
||||
Boston, MA 02111-1307 USA
|
||||
|
||||
$Id: wiring.h 249 2007-02-03 16:52:51Z mellis $
|
||||
*/
|
||||
|
||||
#ifndef Pins_Arduino_h
|
||||
#define Pins_Arduino_h
|
||||
|
||||
#include <avr/pgmspace.h>
|
||||
|
||||
#define NUM_DIGITAL_PINS 82
|
||||
#define NUM_ANALOG_INPUTS 16
|
||||
#define analogInputToDigitalPin(p) ((p < 16) ? (p) + 54 : -1)
|
||||
#define digitalPinHasPWM(p) (((p) >= 2 && (p) <= 13) || ((p) >= 44 && (p)<= 46))
|
||||
|
||||
static const uint8_t SS = 53;
|
||||
static const uint8_t MOSI = 51;
|
||||
static const uint8_t MISO = 50;
|
||||
static const uint8_t SCK = 52;
|
||||
|
||||
static const uint8_t SDA = 20;
|
||||
static const uint8_t SCL = 21;
|
||||
static const uint8_t LED_BUILTIN = 13;
|
||||
|
||||
static const uint8_t A0 = 54;
|
||||
static const uint8_t A1 = 55;
|
||||
static const uint8_t A2 = 56;
|
||||
static const uint8_t A3 = 57;
|
||||
static const uint8_t A4 = 58;
|
||||
static const uint8_t A5 = 59;
|
||||
static const uint8_t A6 = 60;
|
||||
static const uint8_t A7 = 61;
|
||||
static const uint8_t A8 = 62;
|
||||
static const uint8_t A9 = 63;
|
||||
static const uint8_t A10 = 64;
|
||||
static const uint8_t A11 = 65;
|
||||
static const uint8_t A12 = 66;
|
||||
static const uint8_t A13 = 67;
|
||||
static const uint8_t A14 = 68;
|
||||
static const uint8_t A15 = 69;
|
||||
|
||||
// A majority of the pins are NOT PCINTs, SO BE WARNED (i.e. you cannot use them as receive pins)
|
||||
// Only pins available for RECEIVE (TRANSMIT can be on any pin):
|
||||
// (I've deliberately left out pin mapping to the Hardware USARTs - seems senseless to me)
|
||||
// Pins: 10, 11, 12, 13, 50, 51, 52, 53, 62, 63, 64, 65, 66, 67, 68, 69
|
||||
|
||||
#define digitalPinToPCICR(p) ( (((p) >= 10) && ((p) <= 13)) || \
|
||||
(((p) >= 50) && ((p) <= 53)) || \
|
||||
(((p) >= 62) && ((p) <= 69)) ? (&PCICR) : ((uint8_t *)0) )
|
||||
|
||||
#define digitalPinToPCICRbit(p) ( (((p) >= 10) && ((p) <= 13)) || (((p) >= 50) && ((p) <= 53)) ? 0 : \
|
||||
( (((p) >= 62) && ((p) <= 69)) ? 2 : \
|
||||
0 ) )
|
||||
|
||||
#define digitalPinToPCMSK(p) ( (((p) >= 10) && ((p) <= 13)) || (((p) >= 50) && ((p) <= 53)) ? (&PCMSK0) : \
|
||||
( (((p) >= 62) && ((p) <= 69)) ? (&PCMSK2) : \
|
||||
((uint8_t *)0) ) )
|
||||
|
||||
#define digitalPinToPCMSKbit(p) ( (((p) >= 10) && ((p) <= 13)) ? ((p) - 6) : \
|
||||
( ((p) == 50) ? 3 : \
|
||||
( ((p) == 51) ? 2 : \
|
||||
( ((p) == 52) ? 1 : \
|
||||
( ((p) == 53) ? 0 : \
|
||||
( (((p) >= 62) && ((p) <= 69)) ? ((p) - 62) : \
|
||||
0 ) ) ) ) ) )
|
||||
|
||||
#ifdef ARDUINO_MAIN
|
||||
|
||||
const uint16_t PROGMEM port_to_mode_PGM[] = {
|
||||
NOT_A_PORT,
|
||||
(uint16_t) &DDRA,
|
||||
(uint16_t) &DDRB,
|
||||
(uint16_t) &DDRC,
|
||||
(uint16_t) &DDRD,
|
||||
(uint16_t) &DDRE,
|
||||
(uint16_t) &DDRF,
|
||||
(uint16_t) &DDRG,
|
||||
(uint16_t) &DDRH,
|
||||
NOT_A_PORT,
|
||||
(uint16_t) &DDRJ,
|
||||
(uint16_t) &DDRK,
|
||||
(uint16_t) &DDRL,
|
||||
};
|
||||
|
||||
const uint16_t PROGMEM port_to_output_PGM[] = {
|
||||
NOT_A_PORT,
|
||||
(uint16_t) &PORTA,
|
||||
(uint16_t) &PORTB,
|
||||
(uint16_t) &PORTC,
|
||||
(uint16_t) &PORTD,
|
||||
(uint16_t) &PORTE,
|
||||
(uint16_t) &PORTF,
|
||||
(uint16_t) &PORTG,
|
||||
(uint16_t) &PORTH,
|
||||
NOT_A_PORT,
|
||||
(uint16_t) &PORTJ,
|
||||
(uint16_t) &PORTK,
|
||||
(uint16_t) &PORTL,
|
||||
};
|
||||
|
||||
const uint16_t PROGMEM port_to_input_PGM[] = {
|
||||
NOT_A_PIN,
|
||||
(uint16_t) &PINA,
|
||||
(uint16_t) &PINB,
|
||||
(uint16_t) &PINC,
|
||||
(uint16_t) &PIND,
|
||||
(uint16_t) &PINE,
|
||||
(uint16_t) &PINF,
|
||||
(uint16_t) &PING,
|
||||
(uint16_t) &PINH,
|
||||
NOT_A_PIN,
|
||||
(uint16_t) &PINJ,
|
||||
(uint16_t) &PINK,
|
||||
(uint16_t) &PINL,
|
||||
};
|
||||
|
||||
const uint8_t PROGMEM digital_pin_to_port_PGM[] = {
|
||||
// PORTLIST
|
||||
// -------------------------------------------
|
||||
PE , // PE 0 ** 0 ** USART0_RX
|
||||
PE , // PE 1 ** 1 ** USART0_TX
|
||||
PE , // PE 4 ** 2 ** PWM2
|
||||
PE , // PE 5 ** 3 ** PWM3
|
||||
PG , // PG 5 ** 4 ** PWM4
|
||||
PE , // PE 3 ** 5 ** PWM5
|
||||
PH , // PH 3 ** 6 ** PWM6
|
||||
PH , // PH 4 ** 7 ** PWM7
|
||||
PH , // PH 5 ** 8 ** PWM8
|
||||
PH , // PH 6 ** 9 ** PWM9
|
||||
PB , // PB 4 ** 10 ** PWM10
|
||||
PB , // PB 5 ** 11 ** PWM11
|
||||
PB , // PB 6 ** 12 ** PWM12
|
||||
PB , // PB 7 ** 13 ** PWM13
|
||||
PJ , // PJ 1 ** 14 ** USART3_TX
|
||||
PJ , // PJ 0 ** 15 ** USART3_RX
|
||||
PH , // PH 1 ** 16 ** USART2_TX
|
||||
PH , // PH 0 ** 17 ** USART2_RX
|
||||
PD , // PD 3 ** 18 ** USART1_TX
|
||||
PD , // PD 2 ** 19 ** USART1_RX
|
||||
PD , // PD 1 ** 20 ** I2C_SDA
|
||||
PD , // PD 0 ** 21 ** I2C_SCL
|
||||
PA , // PA 0 ** 22 ** D22
|
||||
PA , // PA 1 ** 23 ** D23
|
||||
PA , // PA 2 ** 24 ** D24
|
||||
PA , // PA 3 ** 25 ** D25
|
||||
PA , // PA 4 ** 26 ** D26
|
||||
PA , // PA 5 ** 27 ** D27
|
||||
PA , // PA 6 ** 28 ** D28
|
||||
PA , // PA 7 ** 29 ** D29
|
||||
PC , // PC 7 ** 30 ** D30
|
||||
PC , // PC 6 ** 31 ** D31
|
||||
PC , // PC 5 ** 32 ** D32
|
||||
PC , // PC 4 ** 33 ** D33
|
||||
PC , // PC 3 ** 34 ** D34
|
||||
PC , // PC 2 ** 35 ** D35
|
||||
PC , // PC 1 ** 36 ** D36
|
||||
PC , // PC 0 ** 37 ** D37
|
||||
PD , // PD 7 ** 38 ** D38
|
||||
PG , // PG 2 ** 39 ** D39
|
||||
PG , // PG 1 ** 40 ** D40
|
||||
PG , // PG 0 ** 41 ** D41
|
||||
PL , // PL 7 ** 42 ** D42
|
||||
PL , // PL 6 ** 43 ** D43
|
||||
PL , // PL 5 ** 44 ** D44
|
||||
PL , // PL 4 ** 45 ** D45
|
||||
PL , // PL 3 ** 46 ** D46
|
||||
PL , // PL 2 ** 47 ** D47
|
||||
PL , // PL 1 ** 48 ** D48
|
||||
PL , // PL 0 ** 49 ** D49
|
||||
PB , // PB 3 ** 50 ** SPI_MISO
|
||||
PB , // PB 2 ** 51 ** SPI_MOSI
|
||||
PB , // PB 1 ** 52 ** SPI_SCK
|
||||
PB , // PB 0 ** 53 ** SPI_SS
|
||||
PF , // PF 0 ** 54 ** A0
|
||||
PF , // PF 1 ** 55 ** A1
|
||||
PF , // PF 2 ** 56 ** A2
|
||||
PF , // PF 3 ** 57 ** A3
|
||||
PF , // PF 4 ** 58 ** A4
|
||||
PF , // PF 5 ** 59 ** A5
|
||||
PF , // PF 6 ** 60 ** A6
|
||||
PF , // PF 7 ** 61 ** A7
|
||||
PK , // PK 0 ** 62 ** A8
|
||||
PK , // PK 1 ** 63 ** A9
|
||||
PK , // PK 2 ** 64 ** A10
|
||||
PK , // PK 3 ** 65 ** A11
|
||||
PK , // PK 4 ** 66 ** A12
|
||||
PK , // PK 5 ** 67 ** A13
|
||||
PK , // PK 6 ** 68 ** A14
|
||||
PK , // PK 7 ** 69 ** A15
|
||||
PG , // PG 4 ** 70 ** D70
|
||||
PG , // PG 3 ** 71 ** D71
|
||||
PJ , // PJ 2 ** 72 ** D72
|
||||
PJ , // PJ 3 ** 73 ** D73
|
||||
PJ , // PJ 7 ** 74 ** D74
|
||||
PJ , // PJ 4 ** 75 ** D75
|
||||
PJ , // PJ 5 ** 76 ** D76
|
||||
PJ , // PJ 6 ** 77 ** D77
|
||||
PE , // PE 2 ** 78 ** D78
|
||||
PE , // PE 6 ** 79 ** D79
|
||||
PE , // PE 7 ** 80 ** D80
|
||||
PD , // PD 4 ** 81 ** D81
|
||||
PD , // PD 5 ** 82 ** D82
|
||||
PD , // PD 6 ** 83 ** D83
|
||||
PH , // PH 2 ** 84 ** D84
|
||||
PH , // PH 7 ** 85 ** D85
|
||||
};
|
||||
|
||||
const uint8_t PROGMEM digital_pin_to_bit_mask_PGM[] = {
|
||||
// PIN IN PORT
|
||||
// -------------------------------------------
|
||||
_BV( 0 ) , // PE 0 ** 0 ** USART0_RX
|
||||
_BV( 1 ) , // PE 1 ** 1 ** USART0_TX
|
||||
_BV( 4 ) , // PE 4 ** 2 ** PWM2
|
||||
_BV( 5 ) , // PE 5 ** 3 ** PWM3
|
||||
_BV( 5 ) , // PG 5 ** 4 ** PWM4
|
||||
_BV( 3 ) , // PE 3 ** 5 ** PWM5
|
||||
_BV( 3 ) , // PH 3 ** 6 ** PWM6
|
||||
_BV( 4 ) , // PH 4 ** 7 ** PWM7
|
||||
_BV( 5 ) , // PH 5 ** 8 ** PWM8
|
||||
_BV( 6 ) , // PH 6 ** 9 ** PWM9
|
||||
_BV( 4 ) , // PB 4 ** 10 ** PWM10
|
||||
_BV( 5 ) , // PB 5 ** 11 ** PWM11
|
||||
_BV( 6 ) , // PB 6 ** 12 ** PWM12
|
||||
_BV( 7 ) , // PB 7 ** 13 ** PWM13
|
||||
_BV( 1 ) , // PJ 1 ** 14 ** USART3_TX
|
||||
_BV( 0 ) , // PJ 0 ** 15 ** USART3_RX
|
||||
_BV( 1 ) , // PH 1 ** 16 ** USART2_TX
|
||||
_BV( 0 ) , // PH 0 ** 17 ** USART2_RX
|
||||
_BV( 3 ) , // PD 3 ** 18 ** USART1_TX
|
||||
_BV( 2 ) , // PD 2 ** 19 ** USART1_RX
|
||||
_BV( 1 ) , // PD 1 ** 20 ** I2C_SDA
|
||||
_BV( 0 ) , // PD 0 ** 21 ** I2C_SCL
|
||||
_BV( 0 ) , // PA 0 ** 22 ** D22
|
||||
_BV( 1 ) , // PA 1 ** 23 ** D23
|
||||
_BV( 2 ) , // PA 2 ** 24 ** D24
|
||||
_BV( 3 ) , // PA 3 ** 25 ** D25
|
||||
_BV( 4 ) , // PA 4 ** 26 ** D26
|
||||
_BV( 5 ) , // PA 5 ** 27 ** D27
|
||||
_BV( 6 ) , // PA 6 ** 28 ** D28
|
||||
_BV( 7 ) , // PA 7 ** 29 ** D29
|
||||
_BV( 7 ) , // PC 7 ** 30 ** D30
|
||||
_BV( 6 ) , // PC 6 ** 31 ** D31
|
||||
_BV( 5 ) , // PC 5 ** 32 ** D32
|
||||
_BV( 4 ) , // PC 4 ** 33 ** D33
|
||||
_BV( 3 ) , // PC 3 ** 34 ** D34
|
||||
_BV( 2 ) , // PC 2 ** 35 ** D35
|
||||
_BV( 1 ) , // PC 1 ** 36 ** D36
|
||||
_BV( 0 ) , // PC 0 ** 37 ** D37
|
||||
_BV( 7 ) , // PD 7 ** 38 ** D38
|
||||
_BV( 2 ) , // PG 2 ** 39 ** D39
|
||||
_BV( 1 ) , // PG 1 ** 40 ** D40
|
||||
_BV( 0 ) , // PG 0 ** 41 ** D41
|
||||
_BV( 7 ) , // PL 7 ** 42 ** D42
|
||||
_BV( 6 ) , // PL 6 ** 43 ** D43
|
||||
_BV( 5 ) , // PL 5 ** 44 ** D44
|
||||
_BV( 4 ) , // PL 4 ** 45 ** D45
|
||||
_BV( 3 ) , // PL 3 ** 46 ** D46
|
||||
_BV( 2 ) , // PL 2 ** 47 ** D47
|
||||
_BV( 1 ) , // PL 1 ** 48 ** D48
|
||||
_BV( 0 ) , // PL 0 ** 49 ** D49
|
||||
_BV( 3 ) , // PB 3 ** 50 ** SPI_MISO
|
||||
_BV( 2 ) , // PB 2 ** 51 ** SPI_MOSI
|
||||
_BV( 1 ) , // PB 1 ** 52 ** SPI_SCK
|
||||
_BV( 0 ) , // PB 0 ** 53 ** SPI_SS
|
||||
_BV( 0 ) , // PF 0 ** 54 ** A0
|
||||
_BV( 1 ) , // PF 1 ** 55 ** A1
|
||||
_BV( 2 ) , // PF 2 ** 56 ** A2
|
||||
_BV( 3 ) , // PF 3 ** 57 ** A3
|
||||
_BV( 4 ) , // PF 4 ** 58 ** A4
|
||||
_BV( 5 ) , // PF 5 ** 59 ** A5
|
||||
_BV( 6 ) , // PF 6 ** 60 ** A6
|
||||
_BV( 7 ) , // PF 7 ** 61 ** A7
|
||||
_BV( 0 ) , // PK 0 ** 62 ** A8
|
||||
_BV( 1 ) , // PK 1 ** 63 ** A9
|
||||
_BV( 2 ) , // PK 2 ** 64 ** A10
|
||||
_BV( 3 ) , // PK 3 ** 65 ** A11
|
||||
_BV( 4 ) , // PK 4 ** 66 ** A12
|
||||
_BV( 5 ) , // PK 5 ** 67 ** A13
|
||||
_BV( 6 ) , // PK 6 ** 68 ** A14
|
||||
_BV( 7 ) , // PK 7 ** 69 ** A15
|
||||
_BV( 4 ) , // PG 4 ** 70 ** D70
|
||||
_BV( 3 ) , // PG 3 ** 71 ** D71
|
||||
_BV( 2 ) , // PJ 2 ** 72 ** D72
|
||||
_BV( 3 ) , // PJ 3 ** 73 ** D73
|
||||
_BV( 7 ) , // PJ 7 ** 74 ** D74
|
||||
_BV( 4 ) , // PJ 4 ** 75 ** D75
|
||||
_BV( 5 ) , // PJ 5 ** 76 ** D76
|
||||
_BV( 6 ) , // PJ 6 ** 77 ** D77
|
||||
_BV( 2 ) , // PE 2 ** 78 ** D78
|
||||
_BV( 6 ) , // PE 6 ** 79 ** D79
|
||||
_BV( 7 ) , // PE 7 ** 80 ** D80
|
||||
_BV( 4 ) , // PD 4 ** 81 ** D81
|
||||
_BV( 5 ) , // PD 5 ** 82 ** D82
|
||||
_BV( 6 ) , // PD 6 ** 83 ** D83
|
||||
_BV( 2 ) , // PH 2 ** 84 ** D84
|
||||
_BV( 7 ) , // PH 7 ** 85 ** D85
|
||||
};
|
||||
|
||||
const uint8_t PROGMEM digital_pin_to_timer_PGM[] = {
|
||||
// TIMERS
|
||||
// -------------------------------------------
|
||||
NOT_ON_TIMER , // PE 0 ** 0 ** USART0_RX
|
||||
NOT_ON_TIMER , // PE 1 ** 1 ** USART0_TX
|
||||
TIMER3B , // PE 4 ** 2 ** PWM2
|
||||
TIMER3C , // PE 5 ** 3 ** PWM3
|
||||
TIMER0B , // PG 5 ** 4 ** PWM4
|
||||
TIMER3A , // PE 3 ** 5 ** PWM5
|
||||
TIMER4A , // PH 3 ** 6 ** PWM6
|
||||
TIMER4B , // PH 4 ** 7 ** PWM7
|
||||
TIMER4C , // PH 5 ** 8 ** PWM8
|
||||
TIMER2B , // PH 6 ** 9 ** PWM9
|
||||
TIMER2A , // PB 4 ** 10 ** PWM10
|
||||
TIMER1A , // PB 5 ** 11 ** PWM11
|
||||
TIMER1B , // PB 6 ** 12 ** PWM12
|
||||
TIMER0A , // PB 7 ** 13 ** PWM13
|
||||
NOT_ON_TIMER , // PJ 1 ** 14 ** USART3_TX
|
||||
NOT_ON_TIMER , // PJ 0 ** 15 ** USART3_RX
|
||||
NOT_ON_TIMER , // PH 1 ** 16 ** USART2_TX
|
||||
NOT_ON_TIMER , // PH 0 ** 17 ** USART2_RX
|
||||
NOT_ON_TIMER , // PD 3 ** 18 ** USART1_TX
|
||||
NOT_ON_TIMER , // PD 2 ** 19 ** USART1_RX
|
||||
NOT_ON_TIMER , // PD 1 ** 20 ** I2C_SDA
|
||||
NOT_ON_TIMER , // PD 0 ** 21 ** I2C_SCL
|
||||
NOT_ON_TIMER , // PA 0 ** 22 ** D22
|
||||
NOT_ON_TIMER , // PA 1 ** 23 ** D23
|
||||
NOT_ON_TIMER , // PA 2 ** 24 ** D24
|
||||
NOT_ON_TIMER , // PA 3 ** 25 ** D25
|
||||
NOT_ON_TIMER , // PA 4 ** 26 ** D26
|
||||
NOT_ON_TIMER , // PA 5 ** 27 ** D27
|
||||
NOT_ON_TIMER , // PA 6 ** 28 ** D28
|
||||
NOT_ON_TIMER , // PA 7 ** 29 ** D29
|
||||
NOT_ON_TIMER , // PC 7 ** 30 ** D30
|
||||
NOT_ON_TIMER , // PC 6 ** 31 ** D31
|
||||
NOT_ON_TIMER , // PC 5 ** 32 ** D32
|
||||
NOT_ON_TIMER , // PC 4 ** 33 ** D33
|
||||
NOT_ON_TIMER , // PC 3 ** 34 ** D34
|
||||
NOT_ON_TIMER , // PC 2 ** 35 ** D35
|
||||
NOT_ON_TIMER , // PC 1 ** 36 ** D36
|
||||
NOT_ON_TIMER , // PC 0 ** 37 ** D37
|
||||
NOT_ON_TIMER , // PD 7 ** 38 ** D38
|
||||
NOT_ON_TIMER , // PG 2 ** 39 ** D39
|
||||
NOT_ON_TIMER , // PG 1 ** 40 ** D40
|
||||
NOT_ON_TIMER , // PG 0 ** 41 ** D41
|
||||
NOT_ON_TIMER , // PL 7 ** 42 ** D42
|
||||
NOT_ON_TIMER , // PL 6 ** 43 ** D43
|
||||
TIMER5C , // PL 5 ** 44 ** D44
|
||||
TIMER5B , // PL 4 ** 45 ** D45
|
||||
TIMER5A , // PL 3 ** 46 ** D46
|
||||
NOT_ON_TIMER , // PL 2 ** 47 ** D47
|
||||
NOT_ON_TIMER , // PL 1 ** 48 ** D48
|
||||
NOT_ON_TIMER , // PL 0 ** 49 ** D49
|
||||
NOT_ON_TIMER , // PB 3 ** 50 ** SPI_MISO
|
||||
NOT_ON_TIMER , // PB 2 ** 51 ** SPI_MOSI
|
||||
NOT_ON_TIMER , // PB 1 ** 52 ** SPI_SCK
|
||||
NOT_ON_TIMER , // PB 0 ** 53 ** SPI_SS
|
||||
NOT_ON_TIMER , // PF 0 ** 54 ** A0
|
||||
NOT_ON_TIMER , // PF 1 ** 55 ** A1
|
||||
NOT_ON_TIMER , // PF 2 ** 56 ** A2
|
||||
NOT_ON_TIMER , // PF 3 ** 57 ** A3
|
||||
NOT_ON_TIMER , // PF 4 ** 58 ** A4
|
||||
NOT_ON_TIMER , // PF 5 ** 59 ** A5
|
||||
NOT_ON_TIMER , // PF 6 ** 60 ** A6
|
||||
NOT_ON_TIMER , // PF 7 ** 61 ** A7
|
||||
NOT_ON_TIMER , // PK 0 ** 62 ** A8
|
||||
NOT_ON_TIMER , // PK 1 ** 63 ** A9
|
||||
NOT_ON_TIMER , // PK 2 ** 64 ** A10
|
||||
NOT_ON_TIMER , // PK 3 ** 65 ** A11
|
||||
NOT_ON_TIMER , // PK 4 ** 66 ** A12
|
||||
NOT_ON_TIMER , // PK 5 ** 67 ** A13
|
||||
NOT_ON_TIMER , // PK 6 ** 68 ** A14
|
||||
NOT_ON_TIMER , // PK 7 ** 69 ** A15
|
||||
NOT_ON_TIMER , // PG 4 ** 70 ** D70
|
||||
NOT_ON_TIMER , // PG 3 ** 71 ** D71
|
||||
NOT_ON_TIMER , // PJ 2 ** 72 ** D72
|
||||
NOT_ON_TIMER , // PJ 3 ** 73 ** D73
|
||||
NOT_ON_TIMER , // PJ 7 ** 74 ** D74
|
||||
NOT_ON_TIMER , // PJ 4 ** 75 ** D75
|
||||
NOT_ON_TIMER , // PJ 5 ** 76 ** D76
|
||||
NOT_ON_TIMER , // PJ 6 ** 77 ** D77
|
||||
NOT_ON_TIMER , // PE 2 ** 78 ** D78
|
||||
NOT_ON_TIMER , // PE 6 ** 79 ** D79
|
||||
NOT_ON_TIMER , // PE 7 ** 80 ** D80
|
||||
NOT_ON_TIMER , // PD 4 ** 81 ** D81
|
||||
NOT_ON_TIMER , // PD 5 ** 82 ** D82
|
||||
NOT_ON_TIMER , // PD 6 ** 83 ** D83
|
||||
NOT_ON_TIMER , // PH 2 ** 84 ** D84
|
||||
NOT_ON_TIMER , // PH 7 ** 85 ** D85
|
||||
};
|
||||
|
||||
#endif
|
||||
|
||||
#endif
|
||||
29
Marlin/BlinkM.cpp
Normal file
29
Marlin/BlinkM.cpp
Normal file
@ -0,0 +1,29 @@
|
||||
/*
|
||||
BlinkM.cpp - Library for controlling a BlinkM over i2c
|
||||
Created by Tim Koster, August 21 2013.
|
||||
*/
|
||||
#include "Marlin.h"
|
||||
#ifdef BLINKM
|
||||
|
||||
#if (ARDUINO >= 100)
|
||||
# include "Arduino.h"
|
||||
#else
|
||||
# include "WProgram.h"
|
||||
#endif
|
||||
|
||||
#include "BlinkM.h"
|
||||
|
||||
void SendColors(byte red, byte grn, byte blu)
|
||||
{
|
||||
Wire.begin();
|
||||
Wire.beginTransmission(0x09);
|
||||
Wire.write('o'); //to disable ongoing script, only needs to be used once
|
||||
Wire.write('n');
|
||||
Wire.write(red);
|
||||
Wire.write(grn);
|
||||
Wire.write(blu);
|
||||
Wire.endTransmission();
|
||||
}
|
||||
|
||||
#endif //BLINKM
|
||||
|
||||
14
Marlin/BlinkM.h
Normal file
14
Marlin/BlinkM.h
Normal file
@ -0,0 +1,14 @@
|
||||
/*
|
||||
BlinkM.h
|
||||
Library header file for BlinkM library
|
||||
*/
|
||||
#if (ARDUINO >= 100)
|
||||
# include "Arduino.h"
|
||||
#else
|
||||
# include "WProgram.h"
|
||||
#endif
|
||||
|
||||
#include "Wire.h"
|
||||
|
||||
void SendColors(byte red, byte grn, byte blu);
|
||||
|
||||
@ -5,6 +5,13 @@
|
||||
// Advanced settings can be found in Configuration_adv.h
|
||||
// BASIC SETTINGS: select your board type, temperature sensor type, axis scaling, and endstop configuration
|
||||
|
||||
//===========================================================================
|
||||
//============================= DELTA Printer ===============================
|
||||
//===========================================================================
|
||||
// For a Delta printer replace the configuration files with the files in the
|
||||
// example_configurations/delta directory.
|
||||
//
|
||||
|
||||
// User-specified version info of this build to display in [Pronterface, etc] terminal window during
|
||||
// startup. Implementation of an idea by Prof Braino to inform user that any changes made to this
|
||||
// build by the user have been successfully uploaded into firmware.
|
||||
@ -16,15 +23,21 @@
|
||||
// Serial port 0 is still used by the Arduino bootloader regardless of this setting.
|
||||
#define SERIAL_PORT 0
|
||||
|
||||
// This determines the communication speed of the printer
|
||||
// This determines the communication speed of the printer
|
||||
#define BAUDRATE 250000
|
||||
//#define BAUDRATE 115200
|
||||
|
||||
// This enables the serial port associated to the Bluetooth interface
|
||||
//#define BTENABLED // Enable BT interface on AT90USB devices
|
||||
|
||||
|
||||
//// The following define selects which electronics board you have. Please choose the one that matches your setup
|
||||
// 10 = Gen7 custom (Alfons3 Version) "https://github.com/Alfons3/Generation_7_Electronics"
|
||||
// 11 = Gen7 v1.1, v1.2 = 11
|
||||
// 12 = Gen7 v1.3
|
||||
// 13 = Gen7 v1.4
|
||||
// 2 = Cheaptronic v1.0
|
||||
// 20 = Sethi 3D_1
|
||||
// 3 = MEGA/RAMPS up to 1.2 = 3
|
||||
// 33 = RAMPS 1.3 / 1.4 (Power outputs: Extruder, Fan, Bed)
|
||||
// 34 = RAMPS 1.3 / 1.4 (Power outputs: Extruder0, Extruder1, Bed)
|
||||
@ -38,21 +51,27 @@
|
||||
// 64 = STB V1.1
|
||||
// 65 = Azteeg X1
|
||||
// 66 = Melzi with ATmega1284 (MaKr3d version)
|
||||
// 67 = Azteeg X3
|
||||
// 68 = Azteeg X3 Pro
|
||||
// 7 = Ultimaker
|
||||
// 71 = Ultimaker (Older electronics. Pre 1.5.4. This is rare)
|
||||
// 72 = Ultimainboard 2.x (Uses TEMP_SENSOR 20)
|
||||
// 77 = 3Drag Controller
|
||||
// 8 = Teensylu
|
||||
// 80 = Rumba
|
||||
// 81 = Printrboard (AT90USB1286)
|
||||
// 82 = Brainwave (AT90USB646)
|
||||
// 83 = SAV Mk-I (AT90USB1286)
|
||||
// 84 = Teensy++2.0 (AT90USB1286) // CLI compile: DEFINES=AT90USBxx_TEENSYPP_ASSIGNMENTS HARDWARE_MOTHERBOARD=84 make
|
||||
// 9 = Gen3+
|
||||
// 70 = Megatronics
|
||||
// 701= Megatronics v2.0
|
||||
// 702= Minitronics v1.0
|
||||
// 90 = Alpha OMCA board
|
||||
// 91 = Final OMCA board
|
||||
// 301 = Rambo
|
||||
// 301= Rambo
|
||||
// 21 = Elefu Ra Board (v3)
|
||||
// 88 = 5DPrint D8 Driver Board
|
||||
|
||||
#ifndef MOTHERBOARD
|
||||
#define MOTHERBOARD 7
|
||||
@ -61,6 +80,10 @@
|
||||
// Define this to set a custom name for your generic Mendel,
|
||||
// #define CUSTOM_MENDEL_NAME "This Mendel"
|
||||
|
||||
// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines)
|
||||
// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4)
|
||||
// #define MACHINE_UUID "00000000-0000-0000-0000-000000000000"
|
||||
|
||||
// This defines the number of extruders
|
||||
#define EXTRUDERS 1
|
||||
|
||||
@ -70,42 +93,8 @@
|
||||
|
||||
#define POWER_SUPPLY 1
|
||||
|
||||
|
||||
//===========================================================================
|
||||
//============================== Delta Settings =============================
|
||||
//===========================================================================
|
||||
// Enable DELTA kinematics
|
||||
//#define DELTA
|
||||
|
||||
// Make delta curves from many straight lines (linear interpolation).
|
||||
// This is a trade-off between visible corners (not enough segments)
|
||||
// and processor overload (too many expensive sqrt calls).
|
||||
#define DELTA_SEGMENTS_PER_SECOND 200
|
||||
|
||||
// Center-to-center distance of the holes in the diagonal push rods.
|
||||
#define DELTA_DIAGONAL_ROD 250.0 // mm
|
||||
|
||||
// Horizontal offset from middle of printer to smooth rod center.
|
||||
#define DELTA_SMOOTH_ROD_OFFSET 175.0 // mm
|
||||
|
||||
// Horizontal offset of the universal joints on the end effector.
|
||||
#define DELTA_EFFECTOR_OFFSET 33.0 // mm
|
||||
|
||||
// Horizontal offset of the universal joints on the carriages.
|
||||
#define DELTA_CARRIAGE_OFFSET 18.0 // mm
|
||||
|
||||
// Effective horizontal distance bridged by diagonal push rods.
|
||||
#define DELTA_RADIUS (DELTA_SMOOTH_ROD_OFFSET-DELTA_EFFECTOR_OFFSET-DELTA_CARRIAGE_OFFSET)
|
||||
|
||||
// Effective X/Y positions of the three vertical towers.
|
||||
#define SIN_60 0.8660254037844386
|
||||
#define COS_60 0.5
|
||||
#define DELTA_TOWER1_X -SIN_60*DELTA_RADIUS // front left tower
|
||||
#define DELTA_TOWER1_Y -COS_60*DELTA_RADIUS
|
||||
#define DELTA_TOWER2_X SIN_60*DELTA_RADIUS // front right tower
|
||||
#define DELTA_TOWER2_Y -COS_60*DELTA_RADIUS
|
||||
#define DELTA_TOWER3_X 0.0 // back middle tower
|
||||
#define DELTA_TOWER3_Y DELTA_RADIUS
|
||||
// Define this to have the electronics keep the power supply off on startup. If you don't know what this is leave it.
|
||||
// #define PS_DEFAULT_OFF
|
||||
|
||||
//===========================================================================
|
||||
//=============================Thermal Settings ============================
|
||||
@ -119,21 +108,31 @@
|
||||
// 0 is not used
|
||||
// 1 is 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
|
||||
// 2 is 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
|
||||
// 3 is mendel-parts thermistor (4.7k pullup)
|
||||
// 3 is Mendel-parts thermistor (4.7k pullup)
|
||||
// 4 is 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
|
||||
// 5 is 100K thermistor - ATC Semitec 104GT-2 (Used in ParCan) (4.7k pullup)
|
||||
// 5 is 100K thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (4.7k pullup)
|
||||
// 6 is 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
|
||||
// 7 is 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
|
||||
// 71 is 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
|
||||
// 8 is 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
|
||||
// 9 is 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
|
||||
// 10 is 100k RS thermistor 198-961 (4.7k pullup)
|
||||
// 60 is 100k Maker's Tool Works Kapton Bed Thermister
|
||||
// 11 is 100k beta 3950 1% thermistor (4.7k pullup)
|
||||
// 12 is 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||
// 20 is the PT100 circuit found in the Ultimainboard V2.x
|
||||
// 60 is 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||
//
|
||||
// 1k ohm pullup tables - This is not normal, you would have to have changed out your 4.7k for 1k
|
||||
// (but gives greater accuracy and more stable PID)
|
||||
// 51 is 100k thermistor - EPCOS (1k pullup)
|
||||
// 52 is 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
|
||||
// 55 is 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan) (1k pullup)
|
||||
// 55 is 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
|
||||
//
|
||||
// 1047 is Pt1000 with 4k7 pullup
|
||||
// 1010 is Pt1000 with 1k pullup (non standard)
|
||||
// 147 is Pt100 with 4k7 pullup
|
||||
// 110 is Pt100 with 1k pullup (non standard)
|
||||
// 70 is 500C thermistor for Pico hot end
|
||||
|
||||
#define TEMP_SENSOR_0 -1
|
||||
#define TEMP_SENSOR_1 -1
|
||||
@ -170,6 +169,10 @@
|
||||
// HEATER_BED_DUTY_CYCLE_DIVIDER intervals.
|
||||
//#define HEATER_BED_DUTY_CYCLE_DIVIDER 4
|
||||
|
||||
// If you want the M105 heater power reported in watts, define the BED_WATTS, and (shared for all extruders) EXTRUDER_WATTS
|
||||
//#define EXTRUDER_WATTS (12.0*12.0/6.7) // P=I^2/R
|
||||
//#define BED_WATTS (12.0*12.0/1.1) // P=I^2/R
|
||||
|
||||
// PID settings:
|
||||
// Comment the following line to disable PID and enable bang-bang.
|
||||
#define PIDTEMP
|
||||
@ -182,15 +185,15 @@
|
||||
// is more then PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max.
|
||||
#define PID_INTEGRAL_DRIVE_MAX 255 //limit for the integral term
|
||||
#define K1 0.95 //smoothing factor within the PID
|
||||
#define PID_dT ((16.0 * 8.0)/(F_CPU / 64.0 / 256.0)) //sampling period of the temperature routine
|
||||
#define PID_dT ((OVERSAMPLENR * 8.0)/(F_CPU / 64.0 / 256.0)) //sampling period of the temperature routine
|
||||
|
||||
// If you are using a preconfigured hotend then you can use one of the value sets by uncommenting it
|
||||
// If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
|
||||
// Ultimaker
|
||||
#define DEFAULT_Kp 22.2
|
||||
#define DEFAULT_Ki 1.08
|
||||
#define DEFAULT_Kd 114
|
||||
|
||||
// Makergear
|
||||
// MakerGear
|
||||
// #define DEFAULT_Kp 7.0
|
||||
// #define DEFAULT_Ki 0.1
|
||||
// #define DEFAULT_Kd 12
|
||||
@ -248,6 +251,44 @@
|
||||
#define EXTRUDE_MINTEMP 170
|
||||
#define EXTRUDE_MAXLENGTH (X_MAX_LENGTH+Y_MAX_LENGTH) //prevent extrusion of very large distances.
|
||||
|
||||
/*================== Thermal Runaway Protection ==============================
|
||||
This is a feature to protect your printer from burn up in flames if it has
|
||||
a thermistor coming off place (this happened to a friend of mine recently and
|
||||
motivated me writing this feature).
|
||||
|
||||
The issue: If a thermistor come off, it will read a lower temperature than actual.
|
||||
The system will turn the heater on forever, burning up the filament and anything
|
||||
else around.
|
||||
|
||||
After the temperature reaches the target for the first time, this feature will
|
||||
start measuring for how long the current temperature stays below the target
|
||||
minus _HYSTERESIS (set_temperature - THERMAL_RUNAWAY_PROTECTION_HYSTERESIS).
|
||||
|
||||
If it stays longer than _PERIOD, it means the thermistor temperature
|
||||
cannot catch up with the target, so something *may be* wrong. Then, to be on the
|
||||
safe side, the system will he halt.
|
||||
|
||||
Bear in mind the count down will just start AFTER the first time the
|
||||
thermistor temperature is over the target, so you will have no problem if
|
||||
your extruder heater takes 2 minutes to hit the target on heating.
|
||||
|
||||
*/
|
||||
// If you want to enable this feature for all your extruder heaters,
|
||||
// uncomment the 2 defines below:
|
||||
|
||||
// Parameters for all extruder heaters
|
||||
//#define THERMAL_RUNAWAY_PROTECTION_PERIOD 40 //in seconds
|
||||
//#define THERMAL_RUNAWAY_PROTECTION_HYSTERESIS 4 // in degree Celsius
|
||||
|
||||
// If you want to enable this feature for your bed heater,
|
||||
// uncomment the 2 defines below:
|
||||
|
||||
// Parameters for the bed heater
|
||||
//#define THERMAL_RUNAWAY_PROTECTION_BED_PERIOD 20 //in seconds
|
||||
//#define THERMAL_RUNAWAY_PROTECTION_BED_HYSTERESIS 2 // in degree Celsius
|
||||
//===========================================================================
|
||||
|
||||
|
||||
//===========================================================================
|
||||
//=============================Mechanical Settings===========================
|
||||
//===========================================================================
|
||||
@ -259,7 +300,7 @@
|
||||
#define ENDSTOPPULLUPS // Comment this out (using // at the start of the line) to disable the endstop pullup resistors
|
||||
|
||||
#ifndef ENDSTOPPULLUPS
|
||||
// fine Enstop settings: Individual Pullups. will be ignored if ENDSTOPPULLUPS is defined
|
||||
// fine endstop settings: Individual pullups. will be ignored if ENDSTOPPULLUPS is defined
|
||||
// #define ENDSTOPPULLUP_XMAX
|
||||
// #define ENDSTOPPULLUP_YMAX
|
||||
// #define ENDSTOPPULLUP_ZMAX
|
||||
@ -278,9 +319,12 @@
|
||||
#endif
|
||||
|
||||
// The pullups are needed if you directly connect a mechanical endswitch between the signal and ground pins.
|
||||
const bool X_ENDSTOPS_INVERTING = true; // set to true to invert the logic of the endstops.
|
||||
const bool Y_ENDSTOPS_INVERTING = true; // set to true to invert the logic of the endstops.
|
||||
const bool Z_ENDSTOPS_INVERTING = true; // set to true to invert the logic of the endstops.
|
||||
const bool X_MIN_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
|
||||
const bool Y_MIN_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
|
||||
const bool Z_MIN_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
|
||||
const bool X_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
|
||||
const bool Y_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
|
||||
const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
|
||||
//#define DISABLE_MAX_ENDSTOPS
|
||||
//#define DISABLE_MIN_ENDSTOPS
|
||||
|
||||
@ -300,6 +344,7 @@ const bool Z_ENDSTOPS_INVERTING = true; // set to true to invert the logic of th
|
||||
#define DISABLE_Y false
|
||||
#define DISABLE_Z false
|
||||
#define DISABLE_E false // For all extruders
|
||||
#define DISABLE_INACTIVE_EXTRUDER true //disable only inactive extruders and keep active extruder enabled
|
||||
|
||||
#define INVERT_X_DIR true // for Mendel set to false, for Orca set to true
|
||||
#define INVERT_Y_DIR false // for Mendel set to true, for Orca set to false
|
||||
@ -316,6 +361,7 @@ const bool Z_ENDSTOPS_INVERTING = true; // set to true to invert the logic of th
|
||||
|
||||
#define min_software_endstops true // If true, axis won't move to coordinates less than HOME_POS.
|
||||
#define max_software_endstops true // If true, axis won't move to coordinates greater than the defined lengths below.
|
||||
|
||||
// Travel limits after homing
|
||||
#define X_MAX_POS 205
|
||||
#define X_MIN_POS 0
|
||||
@ -327,13 +373,103 @@ const bool Z_ENDSTOPS_INVERTING = true; // set to true to invert the logic of th
|
||||
#define X_MAX_LENGTH (X_MAX_POS - X_MIN_POS)
|
||||
#define Y_MAX_LENGTH (Y_MAX_POS - Y_MIN_POS)
|
||||
#define Z_MAX_LENGTH (Z_MAX_POS - Z_MIN_POS)
|
||||
//============================= Bed Auto Leveling ===========================
|
||||
|
||||
//#define ENABLE_AUTO_BED_LEVELING // Delete the comment to enable (remove // at the start of the line)
|
||||
|
||||
#ifdef ENABLE_AUTO_BED_LEVELING
|
||||
|
||||
// There are 2 different ways to pick the X and Y locations to probe:
|
||||
|
||||
// - "grid" mode
|
||||
// Probe every point in a rectangular grid
|
||||
// You must specify the rectangle, and the density of sample points
|
||||
// This mode is preferred because there are more measurements.
|
||||
// It used to be called ACCURATE_BED_LEVELING but "grid" is more descriptive
|
||||
|
||||
// - "3-point" mode
|
||||
// Probe 3 arbitrary points on the bed (that aren't colinear)
|
||||
// You must specify the X & Y coordinates of all 3 points
|
||||
|
||||
#define AUTO_BED_LEVELING_GRID
|
||||
// with AUTO_BED_LEVELING_GRID, the bed is sampled in a
|
||||
// AUTO_BED_LEVELING_GRID_POINTSxAUTO_BED_LEVELING_GRID_POINTS grid
|
||||
// and least squares solution is calculated
|
||||
// Note: this feature occupies 10'206 byte
|
||||
#ifdef AUTO_BED_LEVELING_GRID
|
||||
|
||||
// set the rectangle in which to probe
|
||||
#define LEFT_PROBE_BED_POSITION 15
|
||||
#define RIGHT_PROBE_BED_POSITION 170
|
||||
#define BACK_PROBE_BED_POSITION 180
|
||||
#define FRONT_PROBE_BED_POSITION 20
|
||||
|
||||
// set the number of grid points per dimension
|
||||
// I wouldn't see a reason to go above 3 (=9 probing points on the bed)
|
||||
#define AUTO_BED_LEVELING_GRID_POINTS 2
|
||||
|
||||
|
||||
#else // not AUTO_BED_LEVELING_GRID
|
||||
// with no grid, just probe 3 arbitrary points. A simple cross-product
|
||||
// is used to esimate the plane of the print bed
|
||||
|
||||
#define ABL_PROBE_PT_1_X 15
|
||||
#define ABL_PROBE_PT_1_Y 180
|
||||
#define ABL_PROBE_PT_2_X 15
|
||||
#define ABL_PROBE_PT_2_Y 20
|
||||
#define ABL_PROBE_PT_3_X 170
|
||||
#define ABL_PROBE_PT_3_Y 20
|
||||
|
||||
#endif // AUTO_BED_LEVELING_GRID
|
||||
|
||||
|
||||
// these are the offsets to the probe relative to the extruder tip (Hotend - Probe)
|
||||
#define X_PROBE_OFFSET_FROM_EXTRUDER -25
|
||||
#define Y_PROBE_OFFSET_FROM_EXTRUDER -29
|
||||
#define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35
|
||||
|
||||
#define Z_RAISE_BEFORE_HOMING 4 // (in mm) Raise Z before homing (G28) for Probe Clearance.
|
||||
// Be sure you have this distance over your Z_MAX_POS in case
|
||||
|
||||
#define XY_TRAVEL_SPEED 8000 // X and Y axis travel speed between probes, in mm/min
|
||||
|
||||
#define Z_RAISE_BEFORE_PROBING 15 //How much the extruder will be raised before traveling to the first probing point.
|
||||
#define Z_RAISE_BETWEEN_PROBINGS 5 //How much the extruder will be raised when traveling from between next probing points
|
||||
|
||||
|
||||
//If defined, the Probe servo will be turned on only during movement and then turned off to avoid jerk
|
||||
//The value is the delay to turn the servo off after powered on - depends on the servo speed; 300ms is good value, but you can try lower it.
|
||||
// You MUST HAVE the SERVO_ENDSTOPS defined to use here a value higher than zero otherwise your code will not compile.
|
||||
|
||||
// #define PROBE_SERVO_DEACTIVATION_DELAY 300
|
||||
|
||||
|
||||
//If you have enabled the Bed Auto Leveling and are using the same Z Probe for Z Homing,
|
||||
//it is highly recommended you let this Z_SAFE_HOMING enabled!!!
|
||||
|
||||
#define Z_SAFE_HOMING // This feature is meant to avoid Z homing with probe outside the bed area.
|
||||
// When defined, it will:
|
||||
// - Allow Z homing only after X and Y homing AND stepper drivers still enabled
|
||||
// - If stepper drivers timeout, it will need X and Y homing again before Z homing
|
||||
// - Position the probe in a defined XY point before Z Homing when homing all axis (G28)
|
||||
// - Block Z homing only when the probe is outside bed area.
|
||||
|
||||
#ifdef Z_SAFE_HOMING
|
||||
|
||||
#define Z_SAFE_HOMING_X_POINT (X_MAX_LENGTH/2) // X point for Z homing when homing all axis (G28)
|
||||
#define Z_SAFE_HOMING_Y_POINT (Y_MAX_LENGTH/2) // Y point for Z homing when homing all axis (G28)
|
||||
|
||||
#endif
|
||||
|
||||
#endif // ENABLE_AUTO_BED_LEVELING
|
||||
|
||||
|
||||
// The position of the homing switches
|
||||
//#define MANUAL_HOME_POSITIONS // If defined, MANUAL_*_HOME_POS below will be used
|
||||
//#define BED_CENTER_AT_0_0 // If defined, the center of the bed is at (X=0, Y=0)
|
||||
|
||||
//Manual homing switch locations:
|
||||
// For deltabots this means top and center of the cartesian print volume.
|
||||
// For deltabots this means top and center of the Cartesian print volume.
|
||||
#define MANUAL_X_HOME_POS 0
|
||||
#define MANUAL_Y_HOME_POS 0
|
||||
#define MANUAL_Z_HOME_POS 0
|
||||
@ -347,7 +483,7 @@ const bool Z_ENDSTOPS_INVERTING = true; // set to true to invert the logic of th
|
||||
|
||||
#define DEFAULT_AXIS_STEPS_PER_UNIT {78.7402,78.7402,200.0*8/3,760*1.1} // default steps per unit for Ultimaker
|
||||
#define DEFAULT_MAX_FEEDRATE {500, 500, 5, 25} // (mm/sec)
|
||||
#define DEFAULT_MAX_ACCELERATION {9000,9000,100,10000} // X, Y, Z, E maximum start speed for accelerated moves. E default values are good for skeinforge 40+, for older versions raise them a lot.
|
||||
#define DEFAULT_MAX_ACCELERATION {9000,9000,100,10000} // X, Y, Z, E maximum start speed for accelerated moves. E default values are good for Skeinforge 40+, for older versions raise them a lot.
|
||||
|
||||
#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E max acceleration in mm/s^2 for printing moves
|
||||
#define DEFAULT_RETRACT_ACCELERATION 3000 // X, Y, Z and E max acceleration in mm/s^2 for retracts
|
||||
@ -367,12 +503,21 @@ const bool Z_ENDSTOPS_INVERTING = true; // set to true to invert the logic of th
|
||||
//=============================Additional Features===========================
|
||||
//===========================================================================
|
||||
|
||||
// Custom M code points
|
||||
#define CUSTOM_M_CODES
|
||||
#ifdef CUSTOM_M_CODES
|
||||
#define CUSTOM_M_CODE_SET_Z_PROBE_OFFSET 851
|
||||
#define Z_PROBE_OFFSET_RANGE_MIN -15
|
||||
#define Z_PROBE_OFFSET_RANGE_MAX -5
|
||||
#endif
|
||||
|
||||
|
||||
// EEPROM
|
||||
// the microcontroller can store settings in the EEPROM, e.g. max velocity...
|
||||
// M500 - stores paramters in EEPROM
|
||||
// The microcontroller can store settings in the EEPROM, e.g. max velocity...
|
||||
// M500 - stores parameters in EEPROM
|
||||
// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
|
||||
// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to.
|
||||
//define this to enable eeprom support
|
||||
//define this to enable EEPROM support
|
||||
//#define EEPROM_SETTINGS
|
||||
//to disable EEPROM Serial responses and decrease program space by ~1700 byte: comment this out:
|
||||
// please keep turned on if you can.
|
||||
@ -388,13 +533,17 @@ const bool Z_ENDSTOPS_INVERTING = true; // set to true to invert the logic of th
|
||||
#define ABS_PREHEAT_FAN_SPEED 255 // Insert Value between 0 and 255
|
||||
|
||||
//LCD and SD support
|
||||
//#define ULTRA_LCD //general lcd support, also 16x2
|
||||
//#define ULTRA_LCD //general LCD support, also 16x2
|
||||
//#define DOGLCD // Support for SPI LCD 128x64 (Controller ST7565R graphic Display Family)
|
||||
//#define SDSUPPORT // Enable SD Card Support in Hardware Console
|
||||
//#define SDSLOW // Use slower SD transfer mode (not normally needed - uncomment if you're getting volume init error)
|
||||
|
||||
//#define ULTIMAKERCONTROLLER //as available from the ultimaker online store.
|
||||
//#define ULTIPANEL //the ultipanel as on thingiverse
|
||||
//#define SD_CHECK_AND_RETRY // Use CRC checks and retries on the SD communication
|
||||
//#define ENCODER_PULSES_PER_STEP 1 // Increase if you have a high resolution encoder
|
||||
//#define ENCODER_STEPS_PER_MENU_ITEM 5 // Set according to ENCODER_PULSES_PER_STEP or your liking
|
||||
//#define ULTIMAKERCONTROLLER //as available from the Ultimaker online store.
|
||||
//#define ULTIPANEL //the UltiPanel as on Thingiverse
|
||||
//#define LCD_FEEDBACK_FREQUENCY_HZ 1000 // this is the tone frequency the buzzer plays when on UI feedback. ie Screen Click
|
||||
//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 100 // the duration the buzzer plays the UI feedback sound. ie Screen Click
|
||||
|
||||
// The MaKr3d Makr-Panel with graphic controller and SD support
|
||||
// http://reprap.org/wiki/MaKr3d_MaKrPanel
|
||||
@ -480,6 +629,21 @@ const bool Z_ENDSTOPS_INVERTING = true; // set to true to invert the logic of th
|
||||
#define LCD_USE_I2C_BUZZER //comment out to disable buzzer on LCD
|
||||
#define NEWPANEL
|
||||
#define ULTIPANEL
|
||||
|
||||
#ifndef ENCODER_PULSES_PER_STEP
|
||||
#define ENCODER_PULSES_PER_STEP 4
|
||||
#endif
|
||||
|
||||
#ifndef ENCODER_STEPS_PER_MENU_ITEM
|
||||
#define ENCODER_STEPS_PER_MENU_ITEM 1
|
||||
#endif
|
||||
|
||||
|
||||
#ifdef LCD_USE_I2C_BUZZER
|
||||
#define LCD_FEEDBACK_FREQUENCY_HZ 1000
|
||||
#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 100
|
||||
#endif
|
||||
|
||||
#endif
|
||||
|
||||
// Panucatt VIKI LCD with status LEDs, integrated click & L/R/U/P buttons, separate encoder inputs
|
||||
@ -496,6 +660,17 @@ const bool Z_ENDSTOPS_INVERTING = true; // set to true to invert the logic of th
|
||||
#define ULTIPANEL
|
||||
#endif
|
||||
|
||||
// Shift register panels
|
||||
// ---------------------
|
||||
// 2 wire Non-latching LCD SR from:
|
||||
// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/schematics#!shiftregister-connection
|
||||
//#define SR_LCD
|
||||
#ifdef SR_LCD
|
||||
#define SR_LCD_2W_NL // Non latching 2 wire shift register
|
||||
//#define NEWPANEL
|
||||
#endif
|
||||
|
||||
|
||||
#ifdef ULTIPANEL
|
||||
// #define NEWPANEL //enable this if you have a click-encoder panel
|
||||
#define SDSUPPORT
|
||||
@ -507,7 +682,7 @@ const bool Z_ENDSTOPS_INVERTING = true; // set to true to invert the logic of th
|
||||
#define LCD_WIDTH 20
|
||||
#define LCD_HEIGHT 4
|
||||
#endif
|
||||
#else //no panel but just lcd
|
||||
#else //no panel but just LCD
|
||||
#ifdef ULTRA_LCD
|
||||
#ifdef DOGLCD // Change number of lines to match the 128x64 graphics display
|
||||
#define LCD_WIDTH 20
|
||||
@ -529,6 +704,11 @@ const bool Z_ENDSTOPS_INVERTING = true; // set to true to invert the logic of th
|
||||
// Increase the FAN pwm frequency. Removes the PWM noise but increases heating in the FET/Arduino
|
||||
//#define FAST_PWM_FAN
|
||||
|
||||
// Temperature status LEDs that display the hotend and bet temperature.
|
||||
// If all hotends and bed temperature and temperature setpoint are < 54C then the BLUE led is on.
|
||||
// Otherwise the RED led is on. There is 1C hysteresis.
|
||||
//#define TEMP_STAT_LEDS
|
||||
|
||||
// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency
|
||||
// which is not ass annoying as with the hardware PWM. On the other hand, if this frequency
|
||||
// is too low, you should also increment SOFT_PWM_SCALE.
|
||||
@ -550,6 +730,9 @@ const bool Z_ENDSTOPS_INVERTING = true; // set to true to invert the logic of th
|
||||
// Support for the BariCUDA Paste Extruder.
|
||||
//#define BARICUDA
|
||||
|
||||
//define BlinkM/CyzRgb Support
|
||||
//#define BLINKM
|
||||
|
||||
/*********************************************************************\
|
||||
* R/C SERVO support
|
||||
* Sponsored by TrinityLabs, Reworked by codexmas
|
||||
|
||||
@ -37,7 +37,11 @@ void _EEPROM_readData(int &pos, uint8_t* value, uint8_t size)
|
||||
// the default values are used whenever there is a change to the data, to prevent
|
||||
// wrong data being written to the variables.
|
||||
// ALSO: always make sure the variables in the Store and retrieve sections are in the same order.
|
||||
#define EEPROM_VERSION "V08"
|
||||
#ifdef DELTA
|
||||
#define EEPROM_VERSION "V11"
|
||||
#else
|
||||
#define EEPROM_VERSION "V10"
|
||||
#endif
|
||||
|
||||
#ifdef EEPROM_SETTINGS
|
||||
void Config_StoreSettings()
|
||||
@ -57,6 +61,12 @@ void Config_StoreSettings()
|
||||
EEPROM_WRITE_VAR(i,max_z_jerk);
|
||||
EEPROM_WRITE_VAR(i,max_e_jerk);
|
||||
EEPROM_WRITE_VAR(i,add_homeing);
|
||||
#ifdef DELTA
|
||||
EEPROM_WRITE_VAR(i,endstop_adj);
|
||||
EEPROM_WRITE_VAR(i,delta_radius);
|
||||
EEPROM_WRITE_VAR(i,delta_diagonal_rod);
|
||||
EEPROM_WRITE_VAR(i,delta_segments_per_second);
|
||||
#endif
|
||||
#ifndef ULTIPANEL
|
||||
int plaPreheatHotendTemp = PLA_PREHEAT_HOTEND_TEMP, plaPreheatHPBTemp = PLA_PREHEAT_HPB_TEMP, plaPreheatFanSpeed = PLA_PREHEAT_FAN_SPEED;
|
||||
int absPreheatHotendTemp = ABS_PREHEAT_HOTEND_TEMP, absPreheatHPBTemp = ABS_PREHEAT_HPB_TEMP, absPreheatFanSpeed = ABS_PREHEAT_FAN_SPEED;
|
||||
@ -67,6 +77,7 @@ void Config_StoreSettings()
|
||||
EEPROM_WRITE_VAR(i,absPreheatHotendTemp);
|
||||
EEPROM_WRITE_VAR(i,absPreheatHPBTemp);
|
||||
EEPROM_WRITE_VAR(i,absPreheatFanSpeed);
|
||||
EEPROM_WRITE_VAR(i,zprobe_zoffset);
|
||||
#ifdef PIDTEMP
|
||||
EEPROM_WRITE_VAR(i,Kp);
|
||||
EEPROM_WRITE_VAR(i,Ki);
|
||||
@ -91,7 +102,7 @@ void Config_StoreSettings()
|
||||
#endif //EEPROM_SETTINGS
|
||||
|
||||
|
||||
#ifdef EEPROM_CHITCHAT
|
||||
#ifndef DISABLE_M503
|
||||
void Config_PrintSettings()
|
||||
{ // Always have this function, even with EEPROM_SETTINGS disabled, the current values will be shown
|
||||
SERIAL_ECHO_START;
|
||||
@ -145,6 +156,22 @@ void Config_PrintSettings()
|
||||
SERIAL_ECHOPAIR(" Y" ,add_homeing[1] );
|
||||
SERIAL_ECHOPAIR(" Z" ,add_homeing[2] );
|
||||
SERIAL_ECHOLN("");
|
||||
#ifdef DELTA
|
||||
SERIAL_ECHO_START;
|
||||
SERIAL_ECHOLNPGM("Endstop adjustement (mm):");
|
||||
SERIAL_ECHO_START;
|
||||
SERIAL_ECHOPAIR(" M666 X",endstop_adj[0] );
|
||||
SERIAL_ECHOPAIR(" Y" ,endstop_adj[1] );
|
||||
SERIAL_ECHOPAIR(" Z" ,endstop_adj[2] );
|
||||
SERIAL_ECHOLN("");
|
||||
SERIAL_ECHO_START;
|
||||
SERIAL_ECHOLNPGM("Delta settings: L=delta_diagonal_rod, R=delta_radius, S=delta_segments_per_second");
|
||||
SERIAL_ECHO_START;
|
||||
SERIAL_ECHOPAIR(" M665 L",delta_diagonal_rod );
|
||||
SERIAL_ECHOPAIR(" R" ,delta_radius );
|
||||
SERIAL_ECHOPAIR(" S" ,delta_segments_per_second );
|
||||
SERIAL_ECHOLN("");
|
||||
#endif
|
||||
#ifdef PIDTEMP
|
||||
SERIAL_ECHO_START;
|
||||
SERIAL_ECHOLNPGM("PID settings:");
|
||||
@ -185,6 +212,12 @@ void Config_RetrieveSettings()
|
||||
EEPROM_READ_VAR(i,max_z_jerk);
|
||||
EEPROM_READ_VAR(i,max_e_jerk);
|
||||
EEPROM_READ_VAR(i,add_homeing);
|
||||
#ifdef DELTA
|
||||
EEPROM_READ_VAR(i,endstop_adj);
|
||||
EEPROM_READ_VAR(i,delta_radius);
|
||||
EEPROM_READ_VAR(i,delta_diagonal_rod);
|
||||
EEPROM_READ_VAR(i,delta_segments_per_second);
|
||||
#endif
|
||||
#ifndef ULTIPANEL
|
||||
int plaPreheatHotendTemp, plaPreheatHPBTemp, plaPreheatFanSpeed;
|
||||
int absPreheatHotendTemp, absPreheatHPBTemp, absPreheatFanSpeed;
|
||||
@ -195,6 +228,7 @@ void Config_RetrieveSettings()
|
||||
EEPROM_READ_VAR(i,absPreheatHotendTemp);
|
||||
EEPROM_READ_VAR(i,absPreheatHPBTemp);
|
||||
EEPROM_READ_VAR(i,absPreheatFanSpeed);
|
||||
EEPROM_READ_VAR(i,zprobe_zoffset);
|
||||
#ifndef PIDTEMP
|
||||
float Kp,Ki,Kd;
|
||||
#endif
|
||||
@ -216,7 +250,9 @@ void Config_RetrieveSettings()
|
||||
{
|
||||
Config_ResetDefault();
|
||||
}
|
||||
#ifdef EEPROM_CHITCHAT
|
||||
Config_PrintSettings();
|
||||
#endif
|
||||
}
|
||||
#endif
|
||||
|
||||
@ -244,6 +280,13 @@ void Config_ResetDefault()
|
||||
max_z_jerk=DEFAULT_ZJERK;
|
||||
max_e_jerk=DEFAULT_EJERK;
|
||||
add_homeing[0] = add_homeing[1] = add_homeing[2] = 0;
|
||||
#ifdef DELTA
|
||||
endstop_adj[0] = endstop_adj[1] = endstop_adj[2] = 0;
|
||||
delta_radius= DELTA_RADIUS;
|
||||
delta_diagonal_rod= DELTA_DIAGONAL_ROD;
|
||||
delta_segments_per_second= DELTA_SEGMENTS_PER_SECOND;
|
||||
recalc_delta_settings(delta_radius, delta_diagonal_rod);
|
||||
#endif
|
||||
#ifdef ULTIPANEL
|
||||
plaPreheatHotendTemp = PLA_PREHEAT_HOTEND_TEMP;
|
||||
plaPreheatHPBTemp = PLA_PREHEAT_HPB_TEMP;
|
||||
@ -252,6 +295,9 @@ void Config_ResetDefault()
|
||||
absPreheatHPBTemp = ABS_PREHEAT_HPB_TEMP;
|
||||
absPreheatFanSpeed = ABS_PREHEAT_FAN_SPEED;
|
||||
#endif
|
||||
#ifdef ENABLE_AUTO_BED_LEVELING
|
||||
zprobe_zoffset = -Z_PROBE_OFFSET_FROM_EXTRUDER;
|
||||
#endif
|
||||
#ifdef DOGLCD
|
||||
lcd_contrast = DEFAULT_LCD_CONTRAST;
|
||||
#endif
|
||||
|
||||
@ -5,7 +5,7 @@
|
||||
|
||||
void Config_ResetDefault();
|
||||
|
||||
#ifdef EEPROM_CHITCHAT
|
||||
#ifndef DISABLE_M503
|
||||
void Config_PrintSettings();
|
||||
#else
|
||||
FORCE_INLINE void Config_PrintSettings() {}
|
||||
|
||||
@ -11,7 +11,7 @@
|
||||
#define BED_CHECK_INTERVAL 5000 //ms between checks in bang-bang control
|
||||
|
||||
//// Heating sanity check:
|
||||
// This waits for the watchperiod in milliseconds whenever an M104 or M109 increases the target temperature
|
||||
// This waits for the watch period in milliseconds whenever an M104 or M109 increases the target temperature
|
||||
// If the temperature has not increased at the end of that period, the target temperature is set to zero.
|
||||
// It can be reset with another M104/M109. This check is also only triggered if the target temperature and the current temperature
|
||||
// differ by at least 2x WATCH_TEMP_INCREASE
|
||||
@ -19,27 +19,31 @@
|
||||
//#define WATCH_TEMP_INCREASE 10 //Heat up at least 10 degree in 20 seconds
|
||||
|
||||
#ifdef PIDTEMP
|
||||
// this adds an experimental additional term to the heatingpower, proportional to the extrusion speed.
|
||||
// if Kc is choosen well, the additional required power due to increased melting should be compensated.
|
||||
// this adds an experimental additional term to the heating power, proportional to the extrusion speed.
|
||||
// if Kc is chosen well, the additional required power due to increased melting should be compensated.
|
||||
#define PID_ADD_EXTRUSION_RATE
|
||||
#ifdef PID_ADD_EXTRUSION_RATE
|
||||
#define DEFAULT_Kc (1) //heatingpower=Kc*(e_speed)
|
||||
#define DEFAULT_Kc (1) //heating power=Kc*(e_speed)
|
||||
#endif
|
||||
#endif
|
||||
|
||||
|
||||
//automatic temperature: The hot end target temperature is calculated by all the buffered lines of gcode.
|
||||
//The maximum buffered steps/sec of the extruder motor are called "se".
|
||||
//You enter the autotemp mode by a M109 S<mintemp> T<maxtemp> F<factor>
|
||||
//You enter the autotemp mode by a M109 S<mintemp> B<maxtemp> F<factor>
|
||||
// the target temperature is set to mintemp+factor*se[steps/sec] and limited by mintemp and maxtemp
|
||||
// you exit the value by any M109 without F*
|
||||
// Also, if the temperature is set to a value <mintemp, it is not changed by autotemp.
|
||||
// on an ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode
|
||||
// on an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode
|
||||
#define AUTOTEMP
|
||||
#ifdef AUTOTEMP
|
||||
#define AUTOTEMP_OLDWEIGHT 0.98
|
||||
#endif
|
||||
|
||||
//Show Temperature ADC value
|
||||
//The M105 command return, besides traditional information, the ADC value read from temperature sensors.
|
||||
//#define SHOW_TEMP_ADC_VALUES
|
||||
|
||||
// extruder run-out prevention.
|
||||
//if the machine is idle, and the temperature over MINTEMP, every couple of SECONDS some filament is extruded
|
||||
//#define EXTRUDER_RUNOUT_PREVENT
|
||||
@ -146,6 +150,21 @@
|
||||
#define EXTRUDERS 1
|
||||
#endif
|
||||
|
||||
// Same again but for Y Axis.
|
||||
//#define Y_DUAL_STEPPER_DRIVERS
|
||||
|
||||
// Define if the two Y drives need to rotate in opposite directions
|
||||
#define INVERT_Y2_VS_Y_DIR true
|
||||
|
||||
#ifdef Y_DUAL_STEPPER_DRIVERS
|
||||
#undef EXTRUDERS
|
||||
#define EXTRUDERS 1
|
||||
#endif
|
||||
|
||||
#if defined (Z_DUAL_STEPPER_DRIVERS) && defined (Y_DUAL_STEPPER_DRIVERS)
|
||||
#error "You cannot have dual drivers for both Y and Z"
|
||||
#endif
|
||||
|
||||
// Enable this for dual x-carriage printers.
|
||||
// A dual x-carriage design has the advantage that the inactive extruder can be parked which
|
||||
// prevents hot-end ooze contaminating the print. It also reduces the weight of each x-carriage
|
||||
@ -155,8 +174,8 @@
|
||||
// Configuration for second X-carriage
|
||||
// Note: the first x-carriage is defined as the x-carriage which homes to the minimum endstop;
|
||||
// the second x-carriage always homes to the maximum endstop.
|
||||
#define X2_MIN_POS 88 // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage
|
||||
#define X2_MAX_POS 350.45 // set maximum to the distance between toolheads when both heads are homed
|
||||
#define X2_MIN_POS 80 // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage
|
||||
#define X2_MAX_POS 353 // set maximum to the distance between toolheads when both heads are homed
|
||||
#define X2_HOME_DIR 1 // the second X-carriage always homes to the maximum endstop position
|
||||
#define X2_HOME_POS X2_MAX_POS // default home position is the maximum carriage position
|
||||
// However: In this mode the EXTRUDER_OFFSET_X value for the second extruder provides a software
|
||||
@ -169,12 +188,34 @@
|
||||
#define X2_STEP_PIN 25
|
||||
#define X2_DIR_PIN 23
|
||||
|
||||
#endif // DUAL_X_CARRIAGE
|
||||
// There are a few selectable movement modes for dual x-carriages using M605 S<mode>
|
||||
// Mode 0: Full control. The slicer has full control over both x-carriages and can achieve optimal travel results
|
||||
// as long as it supports dual x-carriages. (M605 S0)
|
||||
// Mode 1: Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so
|
||||
// that additional slicer support is not required. (M605 S1)
|
||||
// Mode 2: Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all
|
||||
// actions of the first x-carriage. This allows the printer to print 2 arbitrary items at
|
||||
// once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm])
|
||||
|
||||
// This is the default power-up mode which can be later using M605.
|
||||
#define DEFAULT_DUAL_X_CARRIAGE_MODE 0
|
||||
|
||||
// As the x-carriages are independent we can now account for any relative Z offset
|
||||
#define EXTRUDER1_Z_OFFSET 0.0 // z offset relative to extruder 0
|
||||
|
||||
// Default settings in "Auto-park Mode"
|
||||
#define TOOLCHANGE_PARK_ZLIFT 0.2 // the distance to raise Z axis when parking an extruder
|
||||
#define TOOLCHANGE_UNPARK_ZLIFT 1 // the distance to raise Z axis when unparking an extruder
|
||||
|
||||
// Default x offset in duplication mode (typically set to half print bed width)
|
||||
#define DEFAULT_DUPLICATION_X_OFFSET 100
|
||||
|
||||
#endif //DUAL_X_CARRIAGE
|
||||
|
||||
//homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
|
||||
#define X_HOME_RETRACT_MM 5
|
||||
#define Y_HOME_RETRACT_MM 5
|
||||
#define Z_HOME_RETRACT_MM 1
|
||||
#define Z_HOME_RETRACT_MM 2
|
||||
//#define QUICK_HOME //if this is defined, if both x and y are to be homed, a diagonal move will be performed initially.
|
||||
|
||||
#define AXIS_RELATIVE_MODES {false, false, false, false}
|
||||
@ -193,6 +234,16 @@
|
||||
#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate
|
||||
#define DEFAULT_MINTRAVELFEEDRATE 0.0
|
||||
|
||||
// Feedrates for manual moves along X, Y, Z, E from panel
|
||||
#ifdef ULTIPANEL
|
||||
#define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // set the speeds for manual moves (mm/min)
|
||||
#endif
|
||||
|
||||
//Comment to disable setting feedrate multiplier via encoder
|
||||
#ifdef ULTIPANEL
|
||||
#define ULTIPANEL_FEEDMULTIPLY
|
||||
#endif
|
||||
|
||||
// minimum time in microseconds that a movement needs to take if the buffer is emptied.
|
||||
#define DEFAULT_MINSEGMENTTIME 20000
|
||||
|
||||
@ -222,15 +273,29 @@
|
||||
// Motor Current setting (Only functional when motor driver current ref pins are connected to a digital trimpot on supported boards)
|
||||
#define DIGIPOT_MOTOR_CURRENT {135,135,135,135,135} // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A)
|
||||
|
||||
// uncomment to enable an I2C based DIGIPOT like on the Azteeg X3 Pro
|
||||
//#define DIGIPOT_I2C
|
||||
// Number of channels available for I2C digipot, For Azteeg X3 Pro we have 8
|
||||
#define DIGIPOT_I2C_NUM_CHANNELS 8
|
||||
// actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS
|
||||
#define DIGIPOT_I2C_MOTOR_CURRENTS {1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0}
|
||||
|
||||
//===========================================================================
|
||||
//=============================Additional Features===========================
|
||||
//===========================================================================
|
||||
|
||||
//#define CHDK 4 //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
|
||||
#define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again
|
||||
|
||||
#define SD_FINISHED_STEPPERRELEASE true //if sd support and the file is finished: disable steppers?
|
||||
#define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the z enabled so your bed stays in place.
|
||||
|
||||
// The hardware watchdog should reset the Microcontroller disabling all outputs, in case the firmware gets stuck and doesn't do temperature regulation.
|
||||
#define SDCARD_RATHERRECENTFIRST //reverse file order of sd card menu display. Its sorted practically after the file system block order.
|
||||
// if a file is deleted, it frees a block. hence, the order is not purely chronological. To still have auto0.g accessible, there is again the option to do that.
|
||||
// using:
|
||||
//#define MENU_ADDAUTOSTART
|
||||
|
||||
// The hardware watchdog should reset the microcontroller disabling all outputs, in case the firmware gets stuck and doesn't do temperature regulation.
|
||||
//#define USE_WATCHDOG
|
||||
|
||||
#ifdef USE_WATCHDOG
|
||||
@ -243,12 +308,32 @@
|
||||
// Enable the option to stop SD printing when hitting and endstops, needs to be enabled from the LCD menu when this option is enabled.
|
||||
//#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
|
||||
|
||||
// Babystepping enables the user to control the axis in tiny amounts, independently from the normal printing process
|
||||
// it can e.g. be used to change z-positions in the print startup phase in real-time
|
||||
// does not respect endstops!
|
||||
//#define BABYSTEPPING
|
||||
#ifdef BABYSTEPPING
|
||||
#define BABYSTEP_XY //not only z, but also XY in the menu. more clutter, more functions
|
||||
#define BABYSTEP_INVERT_Z false //true for inverse movements in Z
|
||||
#define BABYSTEP_Z_MULTIPLICATOR 2 //faster z movements
|
||||
|
||||
#ifdef COREXY
|
||||
#error BABYSTEPPING not implemented for COREXY yet.
|
||||
#endif
|
||||
|
||||
#ifdef DELTA
|
||||
#ifdef BABYSTEP_XY
|
||||
#error BABYSTEPPING only implemented for Z axis on deltabots.
|
||||
#endif
|
||||
#endif
|
||||
#endif
|
||||
|
||||
// extruder advance constant (s2/mm3)
|
||||
//
|
||||
// advance (steps) = STEPS_PER_CUBIC_MM_E * EXTUDER_ADVANCE_K * cubic mm per second ^ 2
|
||||
//
|
||||
// hooke's law says: force = k * distance
|
||||
// bernoulli's priniciple says: v ^ 2 / 2 + g . h + pressure / density = constant
|
||||
// Hooke's law says: force = k * distance
|
||||
// Bernoulli's principle says: v ^ 2 / 2 + g . h + pressure / density = constant
|
||||
// so: v ^ 2 is proportional to number of steps we advance the extruder
|
||||
//#define ADVANCE
|
||||
|
||||
@ -294,12 +379,15 @@ const unsigned int dropsegments=5; //everything with less than this number of st
|
||||
#define PS_ON_ASLEEP LOW
|
||||
#endif
|
||||
|
||||
// Control heater 0 and heater 1 in parallel.
|
||||
//#define HEATERS_PARALLEL
|
||||
|
||||
//===========================================================================
|
||||
//=============================Buffers ============================
|
||||
//===========================================================================
|
||||
|
||||
// The number of linear motions that can be in the plan at any give time.
|
||||
// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2, i.g. 8,16,32 because shifts and ors are used to do the ringbuffering.
|
||||
// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2, i.g. 8,16,32 because shifts and ors are used to do the ring-buffering.
|
||||
#if defined SDSUPPORT
|
||||
#define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller
|
||||
#else
|
||||
@ -307,24 +395,30 @@ const unsigned int dropsegments=5; //everything with less than this number of st
|
||||
#endif
|
||||
|
||||
|
||||
//The ASCII buffer for recieving from the serial:
|
||||
//The ASCII buffer for receiving from the serial:
|
||||
#define MAX_CMD_SIZE 96
|
||||
#define BUFSIZE 4
|
||||
|
||||
|
||||
// Firmware based and LCD controled retract
|
||||
// Firmware based and LCD controlled retract
|
||||
// M207 and M208 can be used to define parameters for the retraction.
|
||||
// The retraction can be called by the slicer using G10 and G11
|
||||
// until then, intended retractions can be detected by moves that only extrude and the direction.
|
||||
// the moves are than replaced by the firmware controlled ones.
|
||||
|
||||
// #define FWRETRACT //ONLY PARTIALLY TESTED
|
||||
#define MIN_RETRACT 0.1 //minimum extruded mm to accept a automatic gcode retraction attempt
|
||||
|
||||
#ifdef FWRETRACT
|
||||
#define MIN_RETRACT 0.1 //minimum extruded mm to accept a automatic gcode retraction attempt
|
||||
#define RETRACT_LENGTH 3 //default retract length (positive mm)
|
||||
#define RETRACT_FEEDRATE 45 //default feedrate for retracting (mm/s)
|
||||
#define RETRACT_ZLIFT 0 //default retract Z-lift
|
||||
#define RETRACT_RECOVER_LENGTH 0 //default additional recover length (mm, added to retract length when recovering)
|
||||
#define RETRACT_RECOVER_FEEDRATE 8 //default feedrate for recovering from retraction (mm/s)
|
||||
#endif
|
||||
|
||||
//adds support for experimental filament exchange support M600; requires display
|
||||
#ifdef ULTIPANEL
|
||||
//#define FILAMENTCHANGEENABLE
|
||||
#define FILAMENTCHANGEENABLE
|
||||
#ifdef FILAMENTCHANGEENABLE
|
||||
#define FILAMENTCHANGE_XPOS 3
|
||||
#define FILAMENTCHANGE_YPOS 3
|
||||
@ -334,6 +428,12 @@ const unsigned int dropsegments=5; //everything with less than this number of st
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#ifdef FILAMENTCHANGEENABLE
|
||||
#ifdef EXTRUDER_RUNOUT_PREVENT
|
||||
#error EXTRUDER_RUNOUT_PREVENT currently incompatible with FILAMENTCHANGE
|
||||
#endif
|
||||
#endif
|
||||
|
||||
//===========================================================================
|
||||
//============================= Define Defines ============================
|
||||
//===========================================================================
|
||||
@ -341,6 +441,10 @@ const unsigned int dropsegments=5; //everything with less than this number of st
|
||||
#error "You cannot use TEMP_SENSOR_1_AS_REDUNDANT if EXTRUDERS > 1"
|
||||
#endif
|
||||
|
||||
#if EXTRUDERS > 1 && defined HEATERS_PARALLEL
|
||||
#error "You cannot use HEATERS_PARALLEL if EXTRUDERS > 1"
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_0 > 0
|
||||
#define THERMISTORHEATER_0 TEMP_SENSOR_0
|
||||
#define HEATER_0_USES_THERMISTOR
|
||||
|
||||
Binary file not shown.
@ -11,7 +11,7 @@
|
||||
#include "WProgram.h"
|
||||
#endif
|
||||
|
||||
// it is a russian alphabet translation
|
||||
// it is a Russian alphabet translation
|
||||
// except 0401 --> 0xa2 = ╗, 0451 --> 0xb5
|
||||
const PROGMEM uint8_t utf_recode[] =
|
||||
{ 0x41,0xa0,0x42,0xa1,0xe0,0x45,0xa3,0xa4,0xa5,0xa6,0x4b,0xa7,0x4d,0x48,0x4f,
|
||||
@ -115,7 +115,7 @@ void LiquidCrystalRus::begin(uint8_t cols, uint8_t lines, uint8_t dotsize) {
|
||||
|
||||
// SEE PAGE 45/46 FOR INITIALIZATION SPECIFICATION!
|
||||
// according to datasheet, we need at least 40ms after power rises above 2.7V
|
||||
// before sending commands. Arduino can turn on way befer 4.5V so we'll wait 50
|
||||
// before sending commands. Arduino can turn on way before 4.5V so we'll wait 50
|
||||
delayMicroseconds(50000);
|
||||
// Now we pull both RS and R/W low to begin commands
|
||||
digitalWrite(_rs_pin, LOW);
|
||||
@ -126,7 +126,7 @@ void LiquidCrystalRus::begin(uint8_t cols, uint8_t lines, uint8_t dotsize) {
|
||||
|
||||
//put the LCD into 4 bit or 8 bit mode
|
||||
if (! (_displayfunction & LCD_8BITMODE)) {
|
||||
// this is according to the hitachi HD44780 datasheet
|
||||
// this is according to the Hitachi HD44780 datasheet
|
||||
// figure 24, pg 46
|
||||
|
||||
// we start in 8bit mode, try to set 4 bit mode
|
||||
@ -144,7 +144,7 @@ void LiquidCrystalRus::begin(uint8_t cols, uint8_t lines, uint8_t dotsize) {
|
||||
// finally, set to 8-bit interface
|
||||
writeNbits(0x02,4);
|
||||
} else {
|
||||
// this is according to the hitachi HD44780 datasheet
|
||||
// this is according to the Hitachi HD44780 datasheet
|
||||
// page 45 figure 23
|
||||
|
||||
// Send function set command sequence
|
||||
@ -308,7 +308,7 @@ inline void LiquidCrystalRus::command(uint8_t value) {
|
||||
}
|
||||
} else send(out_char, HIGH);
|
||||
#if defined(ARDUINO) && ARDUINO >= 100
|
||||
return 1; // assume sucess
|
||||
return 1; // assume success
|
||||
#endif
|
||||
}
|
||||
|
||||
|
||||
@ -14,7 +14,7 @@
|
||||
#
|
||||
# 1. Modify the line containg "ARDUINO_INSTALL_DIR" to point to the directory that
|
||||
# contains the Arduino installation (for example, under Mac OS X, this
|
||||
# might be /Applications/arduino-0012).
|
||||
# might be /Applications/Arduino.app/Contents/Resources/Java).
|
||||
#
|
||||
# 2. Modify the line containing "UPLOAD_PORT" to refer to the filename
|
||||
# representing the USB or serial connection to your Arduino board
|
||||
@ -40,8 +40,8 @@
|
||||
HARDWARE_MOTHERBOARD ?= 11
|
||||
|
||||
# Arduino source install directory, and version number
|
||||
ARDUINO_INSTALL_DIR ?= ../../arduino-0022
|
||||
ARDUINO_VERSION ?= 22
|
||||
ARDUINO_INSTALL_DIR ?= /Applications/Arduino.app/Contents/Resources/Java
|
||||
ARDUINO_VERSION ?= 105
|
||||
|
||||
# You can optionally set a path to the avr-gcc tools. Requires a trailing slash. (ex: /usr/local/avr-gcc/bin)
|
||||
AVR_TOOLS_PATH ?=
|
||||
@ -54,6 +54,12 @@ UPLOAD_PORT ?= /dev/arduino
|
||||
#Directory used to build files in, contains all the build files, from object files to the final hex file.
|
||||
BUILD_DIR ?= applet
|
||||
|
||||
# This defines whether Liquid_TWI2 support will be built
|
||||
LIQUID_TWI2 ?= 0
|
||||
|
||||
# this defines if Wire is needed
|
||||
WIRE ?= 0
|
||||
|
||||
############################################################################
|
||||
# Below here nothing should be changed...
|
||||
|
||||
@ -139,6 +145,12 @@ MCU ?= at90usb1286
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),82)
|
||||
HARDWARE_VARIANT ?= Teensy
|
||||
MCU ?= at90usb646
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),83)
|
||||
HARDWARE_VARIANT ?= Teensy
|
||||
MCU ?= at90usb1286
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),84)
|
||||
HARDWARE_VARIANT ?= Teensy
|
||||
MCU ?= at90usb1286
|
||||
|
||||
#Gen3+
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),9)
|
||||
@ -165,6 +177,14 @@ else ifeq ($(HARDWARE_MOTHERBOARD),301)
|
||||
HARDWARE_VARIANT ?= arduino
|
||||
MCU ?= atmega2560
|
||||
|
||||
# Azteeg
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),67)
|
||||
HARDWARE_VARIANT ?= arduino
|
||||
MCU ?= atmega2560
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),68)
|
||||
HARDWARE_VARIANT ?= arduino
|
||||
MCU ?= atmega2560
|
||||
|
||||
endif
|
||||
|
||||
# Be sure to regenerate speed_lookuptable.h with create_speed_lookuptable.py
|
||||
@ -199,9 +219,27 @@ VPATH += $(HARDWARE_SRC)
|
||||
ifeq ($(HARDWARE_VARIANT), arduino)
|
||||
VPATH += $(ARDUINO_INSTALL_DIR)/libraries/LiquidCrystal
|
||||
VPATH += $(ARDUINO_INSTALL_DIR)/libraries/SPI
|
||||
ifeq ($(LIQUID_TWI2), 1)
|
||||
VPATH += $(ARDUINO_INSTALL_DIR)/libraries/Wire
|
||||
VPATH += $(ARDUINO_INSTALL_DIR)/libraries/Wire/utility
|
||||
VPATH += $(ARDUINO_INSTALL_DIR)/libraries/LiquidTWI2
|
||||
endif
|
||||
ifeq ($(WIRE), 1)
|
||||
VPATH += $(ARDUINO_INSTALL_DIR)/libraries/Wire
|
||||
VPATH += $(ARDUINO_INSTALL_DIR)/libraries/Wire/utility
|
||||
endif
|
||||
else
|
||||
VPATH += $(HARDWARE_DIR)/libraries/LiquidCrystal
|
||||
VPATH += $(HARDWARE_DIR)/libraries/SPI
|
||||
ifeq ($(LIQUID_TWI2), 1)
|
||||
VPATH += $(HARDWARE_DIR)/libraries/Wire
|
||||
VPATH += $(HARDWARE_DIR)/libraries/Wire/utility
|
||||
VPATH += $(HARDWARE_DIR)/libraries/LiquidTWI2
|
||||
endif
|
||||
ifeq ($(WIRE), 1)
|
||||
VPATH += $(HARDWARE_DIR)/libraries/Wire
|
||||
VPATH += $(HARDWARE_DIR)/libraries/Wire/utility
|
||||
endif
|
||||
endif
|
||||
ifeq ($(HARDWARE_VARIANT), arduino)
|
||||
HARDWARE_SUB_VARIANT ?= mega
|
||||
@ -214,12 +252,27 @@ SRC = wiring.c \
|
||||
wiring_analog.c wiring_digital.c \
|
||||
wiring_pulse.c \
|
||||
wiring_shift.c WInterrupts.c
|
||||
ifeq ($(HARDWARE_VARIANT), Teensy)
|
||||
SRC = wiring.c
|
||||
VPATH += $(ARDUINO_INSTALL_DIR)/hardware/teensy/cores/teensy
|
||||
endif
|
||||
CXXSRC = WMath.cpp WString.cpp Print.cpp Marlin_main.cpp \
|
||||
MarlinSerial.cpp Sd2Card.cpp SdBaseFile.cpp SdFatUtil.cpp \
|
||||
SdFile.cpp SdVolume.cpp motion_control.cpp planner.cpp \
|
||||
stepper.cpp temperature.cpp cardreader.cpp ConfigurationStore.cpp \
|
||||
watchdog.cpp
|
||||
CXXSRC += LiquidCrystal.cpp ultralcd.cpp SPI.cpp Servo.cpp Tone.cpp
|
||||
watchdog.cpp SPI.cpp Servo.cpp Tone.cpp ultralcd.cpp digipot_mcp4451.cpp \
|
||||
vector_3.cpp qr_solve.cpp
|
||||
ifeq ($(LIQUID_TWI2), 0)
|
||||
CXXSRC += LiquidCrystal.cpp
|
||||
else
|
||||
SRC += twi.c
|
||||
CXXSRC += Wire.cpp LiquidTWI2.cpp
|
||||
endif
|
||||
|
||||
ifeq ($(WIRE), 1)
|
||||
SRC += twi.c
|
||||
CXXSRC += Wire.cpp
|
||||
endif
|
||||
|
||||
#Check for Arduino 1.0.0 or higher and use the correct sourcefiles for that version
|
||||
ifeq ($(shell [ $(ARDUINO_VERSION) -ge 100 ] && echo true), true)
|
||||
@ -294,7 +347,12 @@ LDFLAGS = -lm
|
||||
# Programming support using avrdude. Settings and variables.
|
||||
AVRDUDE_PORT = $(UPLOAD_PORT)
|
||||
AVRDUDE_WRITE_FLASH = -U flash:w:$(BUILD_DIR)/$(TARGET).hex:i
|
||||
AVRDUDE_FLAGS = -D -C $(ARDUINO_INSTALL_DIR)/hardware/tools/avr/etc/avrdude.conf \
|
||||
ifeq ($(shell uname -s), Linux)
|
||||
AVRDUDE_CONF = $(ARDUINO_INSTALL_DIR)/hardware/tools/avrdude.conf
|
||||
else
|
||||
AVRDUDE_CONF = $(ARDUINO_INSTALL_DIR)/hardware/tools/avr/etc/avrdude.conf
|
||||
endif
|
||||
AVRDUDE_FLAGS = -D -C $(AVRDUDE_CONF) \
|
||||
-p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER) \
|
||||
-b $(UPLOAD_RATE)
|
||||
|
||||
|
||||
@ -1,5 +1,5 @@
|
||||
// Tonokip RepRap firmware rewrite based off of Hydra-mmm firmware.
|
||||
// Licence: GPL
|
||||
// License: GPL
|
||||
|
||||
#ifndef MARLIN_H
|
||||
#define MARLIN_H
|
||||
@ -30,10 +30,14 @@
|
||||
# include "Arduino.h"
|
||||
#else
|
||||
# include "WProgram.h"
|
||||
//Arduino < 1.0.0 does not define this, so we need to do it ourselfs
|
||||
//Arduino < 1.0.0 does not define this, so we need to do it ourselves
|
||||
# define analogInputToDigitalPin(p) ((p) + A0)
|
||||
#endif
|
||||
|
||||
#ifdef AT90USB
|
||||
#include "HardwareSerial.h"
|
||||
#endif
|
||||
|
||||
#include "MarlinSerial.h"
|
||||
|
||||
#ifndef cbi
|
||||
@ -46,27 +50,31 @@
|
||||
#include "WString.h"
|
||||
|
||||
#ifdef AT90USB
|
||||
#ifdef BTENABLED
|
||||
#define MYSERIAL bt
|
||||
#else
|
||||
#define MYSERIAL Serial
|
||||
#endif // BTENABLED
|
||||
#else
|
||||
#define MYSERIAL MSerial
|
||||
#endif
|
||||
|
||||
#define SERIAL_PROTOCOL(x) MYSERIAL.print(x);
|
||||
#define SERIAL_PROTOCOL_F(x,y) MYSERIAL.print(x,y);
|
||||
#define SERIAL_PROTOCOLPGM(x) serialprintPGM(PSTR(x));
|
||||
#define SERIAL_PROTOCOLLN(x) {MYSERIAL.print(x);MYSERIAL.write('\n');}
|
||||
#define SERIAL_PROTOCOLLNPGM(x) {serialprintPGM(PSTR(x));MYSERIAL.write('\n');}
|
||||
#define SERIAL_PROTOCOL(x) (MYSERIAL.print(x))
|
||||
#define SERIAL_PROTOCOL_F(x,y) (MYSERIAL.print(x,y))
|
||||
#define SERIAL_PROTOCOLPGM(x) (serialprintPGM(PSTR(x)))
|
||||
#define SERIAL_PROTOCOLLN(x) (MYSERIAL.print(x),MYSERIAL.write('\n'))
|
||||
#define SERIAL_PROTOCOLLNPGM(x) (serialprintPGM(PSTR(x)),MYSERIAL.write('\n'))
|
||||
|
||||
|
||||
const char errormagic[] PROGMEM ="Error:";
|
||||
const char echomagic[] PROGMEM ="echo:";
|
||||
#define SERIAL_ERROR_START serialprintPGM(errormagic);
|
||||
#define SERIAL_ERROR_START (serialprintPGM(errormagic))
|
||||
#define SERIAL_ERROR(x) SERIAL_PROTOCOL(x)
|
||||
#define SERIAL_ERRORPGM(x) SERIAL_PROTOCOLPGM(x)
|
||||
#define SERIAL_ERRORLN(x) SERIAL_PROTOCOLLN(x)
|
||||
#define SERIAL_ERRORLNPGM(x) SERIAL_PROTOCOLLNPGM(x)
|
||||
|
||||
#define SERIAL_ECHO_START serialprintPGM(echomagic);
|
||||
#define SERIAL_ECHO_START (serialprintPGM(echomagic))
|
||||
#define SERIAL_ECHO(x) SERIAL_PROTOCOL(x)
|
||||
#define SERIAL_ECHOPGM(x) SERIAL_PROTOCOLPGM(x)
|
||||
#define SERIAL_ECHOLN(x) SERIAL_PROTOCOLLN(x)
|
||||
@ -79,7 +87,7 @@ void serial_echopair_P(const char *s_P, double v);
|
||||
void serial_echopair_P(const char *s_P, unsigned long v);
|
||||
|
||||
|
||||
//things to write to serial from Programmemory. saves 400 to 2k of RAM.
|
||||
//Things to write to serial from Program memory. Saves 400 to 2k of RAM.
|
||||
FORCE_INLINE void serialprintPGM(const char *str)
|
||||
{
|
||||
char ch=pgm_read_byte(str);
|
||||
@ -99,18 +107,23 @@ void manage_inactivity();
|
||||
#if defined(DUAL_X_CARRIAGE) && defined(X_ENABLE_PIN) && X_ENABLE_PIN > -1 \
|
||||
&& defined(X2_ENABLE_PIN) && X2_ENABLE_PIN > -1
|
||||
#define enable_x() do { WRITE(X_ENABLE_PIN, X_ENABLE_ON); WRITE(X2_ENABLE_PIN, X_ENABLE_ON); } while (0)
|
||||
#define disable_x() do { WRITE(X_ENABLE_PIN,!X_ENABLE_ON); WRITE(X2_ENABLE_PIN,!X_ENABLE_ON); } while (0)
|
||||
#define disable_x() do { WRITE(X_ENABLE_PIN,!X_ENABLE_ON); WRITE(X2_ENABLE_PIN,!X_ENABLE_ON); axis_known_position[X_AXIS] = false; } while (0)
|
||||
#elif defined(X_ENABLE_PIN) && X_ENABLE_PIN > -1
|
||||
#define enable_x() WRITE(X_ENABLE_PIN, X_ENABLE_ON)
|
||||
#define disable_x() WRITE(X_ENABLE_PIN,!X_ENABLE_ON)
|
||||
#define disable_x() { WRITE(X_ENABLE_PIN,!X_ENABLE_ON); axis_known_position[X_AXIS] = false; }
|
||||
#else
|
||||
#define enable_x() ;
|
||||
#define disable_x() ;
|
||||
#endif
|
||||
|
||||
#if defined(Y_ENABLE_PIN) && Y_ENABLE_PIN > -1
|
||||
#ifdef Y_DUAL_STEPPER_DRIVERS
|
||||
#define enable_y() { WRITE(Y_ENABLE_PIN, Y_ENABLE_ON); WRITE(Y2_ENABLE_PIN, Y_ENABLE_ON); }
|
||||
#define disable_y() { WRITE(Y_ENABLE_PIN,!Y_ENABLE_ON); WRITE(Y2_ENABLE_PIN, !Y_ENABLE_ON); axis_known_position[Y_AXIS] = false; }
|
||||
#else
|
||||
#define enable_y() WRITE(Y_ENABLE_PIN, Y_ENABLE_ON)
|
||||
#define disable_y() WRITE(Y_ENABLE_PIN,!Y_ENABLE_ON)
|
||||
#define disable_y() { WRITE(Y_ENABLE_PIN,!Y_ENABLE_ON); axis_known_position[Y_AXIS] = false; }
|
||||
#endif
|
||||
#else
|
||||
#define enable_y() ;
|
||||
#define disable_y() ;
|
||||
@ -119,10 +132,10 @@ void manage_inactivity();
|
||||
#if defined(Z_ENABLE_PIN) && Z_ENABLE_PIN > -1
|
||||
#ifdef Z_DUAL_STEPPER_DRIVERS
|
||||
#define enable_z() { WRITE(Z_ENABLE_PIN, Z_ENABLE_ON); WRITE(Z2_ENABLE_PIN, Z_ENABLE_ON); }
|
||||
#define disable_z() { WRITE(Z_ENABLE_PIN,!Z_ENABLE_ON); WRITE(Z2_ENABLE_PIN,!Z_ENABLE_ON); }
|
||||
#define disable_z() { WRITE(Z_ENABLE_PIN,!Z_ENABLE_ON); WRITE(Z2_ENABLE_PIN,!Z_ENABLE_ON); axis_known_position[Z_AXIS] = false; }
|
||||
#else
|
||||
#define enable_z() WRITE(Z_ENABLE_PIN, Z_ENABLE_ON)
|
||||
#define disable_z() WRITE(Z_ENABLE_PIN,!Z_ENABLE_ON)
|
||||
#define disable_z() { WRITE(Z_ENABLE_PIN,!Z_ENABLE_ON); axis_known_position[Z_AXIS] = false; }
|
||||
#endif
|
||||
#else
|
||||
#define enable_z() ;
|
||||
@ -163,6 +176,7 @@ void ClearToSend();
|
||||
void get_coordinates();
|
||||
#ifdef DELTA
|
||||
void calculate_delta(float cartesian[3]);
|
||||
extern float delta[3];
|
||||
#endif
|
||||
void prepare_move();
|
||||
void kill();
|
||||
@ -170,11 +184,13 @@ void Stop();
|
||||
|
||||
bool IsStopped();
|
||||
|
||||
void enquecommand(const char *cmd); //put an ascii command at the end of the current buffer.
|
||||
void enquecommand_P(const char *cmd); //put an ascii command at the end of the current buffer, read from flash
|
||||
void enquecommand(const char *cmd); //put an ASCII command at the end of the current buffer.
|
||||
void enquecommand_P(const char *cmd); //put an ASCII command at the end of the current buffer, read from flash
|
||||
void prepare_arc_move(char isclockwise);
|
||||
void clamp_to_software_endstops(float target[3]);
|
||||
|
||||
void refresh_cmd_timeout(void);
|
||||
|
||||
#ifdef FAST_PWM_FAN
|
||||
void setPwmFrequency(uint8_t pin, int val);
|
||||
#endif
|
||||
@ -187,11 +203,22 @@ void setPwmFrequency(uint8_t pin, int val);
|
||||
extern float homing_feedrate[];
|
||||
extern bool axis_relative_modes[];
|
||||
extern int feedmultiply;
|
||||
extern int extrudemultiply; // Sets extrude multiply factor (in percent)
|
||||
extern int extrudemultiply; // Sets extrude multiply factor (in percent) for all extruders
|
||||
extern int extruder_multiply[EXTRUDERS]; // sets extrude multiply factor (in percent) for each extruder individually
|
||||
extern float volumetric_multiplier[EXTRUDERS]; // reciprocal of cross-sectional area of filament (in square millimeters), stored this way to reduce computational burden in planner
|
||||
extern float current_position[NUM_AXIS] ;
|
||||
extern float add_homeing[3];
|
||||
#ifdef DELTA
|
||||
extern float endstop_adj[3];
|
||||
extern float delta_radius;
|
||||
extern float delta_diagonal_rod;
|
||||
extern float delta_segments_per_second;
|
||||
void recalc_delta_settings(float radius, float diagonal_rod);
|
||||
#endif
|
||||
extern float min_pos[3];
|
||||
extern float max_pos[3];
|
||||
extern bool axis_known_position[3];
|
||||
extern float zprobe_zoffset;
|
||||
extern int fanSpeed;
|
||||
#ifdef BARICUDA
|
||||
extern int ValvePressure;
|
||||
@ -215,4 +242,9 @@ extern unsigned long stoptime;
|
||||
// Handling multiple extruders pins
|
||||
extern uint8_t active_extruder;
|
||||
|
||||
#ifdef DIGIPOT_I2C
|
||||
extern void digipot_i2c_set_current( int channel, float current );
|
||||
extern void digipot_i2c_init();
|
||||
#endif
|
||||
|
||||
#endif
|
||||
|
||||
56
Marlin/Marlin.ino
Normal file
56
Marlin/Marlin.ino
Normal file
@ -0,0 +1,56 @@
|
||||
/* -*- c++ -*- */
|
||||
|
||||
/*
|
||||
Reprap firmware based on Sprinter and grbl.
|
||||
Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 3 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
/*
|
||||
This firmware is a mashup between Sprinter and grbl.
|
||||
(https://github.com/kliment/Sprinter)
|
||||
(https://github.com/simen/grbl/tree)
|
||||
|
||||
It has preliminary support for Matthew Roberts advance algorithm
|
||||
http://reprap.org/pipermail/reprap-dev/2011-May/003323.html
|
||||
*/
|
||||
|
||||
/* All the implementation is done in *.cpp files to get better compatibility with avr-gcc without the Arduino IDE */
|
||||
/* Use this file to help the Arduino IDE find which Arduino libraries are needed and to keep documentation on GCode */
|
||||
|
||||
#include "Configuration.h"
|
||||
#include "pins.h"
|
||||
|
||||
#ifdef ULTRA_LCD
|
||||
#if defined(LCD_I2C_TYPE_PCF8575)
|
||||
#include <Wire.h>
|
||||
#include <LiquidCrystal_I2C.h>
|
||||
#elif defined(LCD_I2C_TYPE_MCP23017) || defined(LCD_I2C_TYPE_MCP23008)
|
||||
#include <Wire.h>
|
||||
#include <LiquidTWI2.h>
|
||||
#elif defined(DOGLCD)
|
||||
#include <U8glib.h> // library for graphics LCD by Oli Kraus (https://code.google.com/p/u8glib/)
|
||||
#else
|
||||
#include <LiquidCrystal.h> // library for character LCD
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#if defined(DIGIPOTSS_PIN) && DIGIPOTSS_PIN > -1
|
||||
#include <SPI.h>
|
||||
#endif
|
||||
|
||||
#if defined(DIGIPOT_I2C)
|
||||
#include <Wire.h>
|
||||
#endif
|
||||
Some files were not shown because too many files have changed in this diff Show More
Loading…
Reference in New Issue
Block a user