bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity

Spacing cleanup

Browse Source
This commit is contained in:
Scott Lahteine
2018-03-17 16:49:08 -05:00
parent 9e9e29ddf8
commit c6ff39cc14
64 changed files with 1005 additions and 1005 deletions
Download Patch File Download Diff File Expand all files Collapse all files

54
Marlin/src/config/examples/TinyBoy2/Configuration.h
View File

@ -406,30 +406,30 @@
// If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
// Ultimaker
//#define DEFAULT_Kp 22.2
//#define DEFAULT_Ki 1.08
//#define DEFAULT_Kd 114
//#define DEFAULT_Kp 22.2
//#define DEFAULT_Ki 1.08
//#define DEFAULT_Kd 114
// MakerGear
//#define DEFAULT_Kp 7.0
//#define DEFAULT_Ki 0.1
//#define DEFAULT_Kd 12
//#define DEFAULT_Kp 7.0
//#define DEFAULT_Ki 0.1
//#define DEFAULT_Kd 12
// Mendel Parts V9 on 12V
//#define DEFAULT_Kp 63.0
//#define DEFAULT_Ki 2.25
//#define DEFAULT_Kd 440
//#define DEFAULT_Kp 63.0
//#define DEFAULT_Ki 2.25
//#define DEFAULT_Kd 440
// TinyBoy2 Extruder - calculated with PID Autotune and tested
// "M303 E0 C8 S200"
//#define DEFAULT_Kp 25.63
//#define DEFAULT_Ki 2.66
//#define DEFAULT_Kd 61.73
//#define DEFAULT_Kp 25.63
//#define DEFAULT_Ki 2.66
//#define DEFAULT_Kd 61.73
// TinyBoy2 Extruder - same, but with fan @ 25% duty
#define DEFAULT_Kp 26.15
#define DEFAULT_Ki 2.71
#define DEFAULT_Kd 63.02
#define DEFAULT_Kp 26.15
#define DEFAULT_Ki 2.71
#define DEFAULT_Kd 63.02
#endif // PIDTEMP
//===========================================================================
@ -460,29 +460,29 @@
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
//#define DEFAULT_bedKp 10.00
//#define DEFAULT_bedKi .023
//#define DEFAULT_bedKd 305.4
//#define DEFAULT_bedKp 10.00
//#define DEFAULT_bedKi .023
//#define DEFAULT_bedKd 305.4
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from pidautotune
//#define DEFAULT_bedKp 97.1
//#define DEFAULT_bedKi 1.41
//#define DEFAULT_bedKd 1675.16
//#define DEFAULT_bedKp 97.1
//#define DEFAULT_bedKi 1.41
//#define DEFAULT_bedKd 1675.16
// FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
// TinyBoy2 heatbed - calculated with PID Autotune and tested
// "M303 E-1 C8 S75"
//#define DEFAULT_bedKp 421.80
//#define DEFAULT_bedKi 82.51
//#define DEFAULT_bedKd 539.06
//#define DEFAULT_bedKp 421.80
//#define DEFAULT_bedKi 82.51
//#define DEFAULT_bedKd 539.06
// TinyBoy2 heatbed - same, but with fan @ 25% duty
// "M303 E-1 C8 S75"
#define DEFAULT_bedKp 267.54
#define DEFAULT_bedKi 52.34
#define DEFAULT_bedKd 341.92
#define DEFAULT_bedKp 267.54
#define DEFAULT_bedKi 52.34
#define DEFAULT_bedKd 341.92
#endif // PIDTEMPBED