bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity

🐛 Spellcheck comments (#22496)

Browse Source 
codespell -q 3 --builtin=clear,rare,informal,code -S ./Marlin/src/lcd/language -L alo,amin,endcode,stdio,uint
This commit is contained in:
luzpaz
2021-08-03 20:02:34 -04:00
committed by Scott Lahteine
parent 8385be25cd
commit c612b56bc1
135 changed files with 186 additions and 186 deletions
Download Patch File Download Diff File Expand all files Collapse all files

2
Marlin/src/gcode/calibrate/G76_M192_M871.cpp
View File

@ -47,7 +47,7 @@
* Compensation values are deltas to first probe measurement at bed temp. = 60°C.
* - The hotend will not be heated at any time.
* - On my Průša MK3S clone I put a piece of paper between the probe and the hotend
* so the hotend fan would not cool my probe constantly. Alternativly you could just
* so the hotend fan would not cool my probe constantly. Alternatively you could just
* make sure the fan is not running while running the calibration process.
*
* Probe calibration:

4
Marlin/src/gcode/config/M43.cpp
View File

@ -288,8 +288,8 @@ inline void servo_probe_test() {
* S<pin> - Start Pin number. If not given, will default to 0
* L<pin> - End Pin number. If not given, will default to last pin defined for this board
* I<bool> - Flag to ignore Marlin's pin protection. Use with caution!!!!
* R - Repeat pulses on each pin this number of times before continueing to next pin
* W - Wait time (in miliseconds) between pulses. If not given will default to 500
* R - Repeat pulses on each pin this number of times before continuing to next pin
* W - Wait time (in milliseconds) between pulses. If not given will default to 500
*
* M43 S - Servo probe test
* P<index> - Probe index (optional - defaults to 0

2
Marlin/src/gcode/feature/L6470/M906.cpp
View File

@ -212,7 +212,7 @@ void L64XX_report_current(L64XX &motor, const L64XX_axis_t axis) {
* L6474 - current in mA (4A max)
* All others - 0-255
*
* Sets KVAL_HOLD wich affects the current being driven through the stepper.
* Sets KVAL_HOLD which affects the current being driven through the stepper.
*
* L6470 is used in the STEP-CLOCK mode. KVAL_HOLD is the only KVAL_xxx
* that affects the effective voltage seen by the stepper.

2
Marlin/src/gcode/feature/L6470/M916-918.cpp
View File

@ -177,7 +177,7 @@ void GcodeSuite::M916() {
if ((status_composite & (sh.STATUS_AXIS_TH_WRN | sh.STATUS_AXIS_TH_SD)))
DEBUG_ECHOLNPGM(".\n.\nTest completed normally - Thermal warning/shutdown has occurred");
else if (status_composite)
DEBUG_ECHOLNPGM(".\n.\nTest completed abnormally - non-thermal error has occured");
DEBUG_ECHOLNPGM(".\n.\nTest completed abnormally - non-thermal error has occurred");
else
DEBUG_ECHOLNPGM(".\n.\nTest completed normally - Unable to get to thermal warning/shutdown");