bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity

XYZ_CHAR macro

Browse Source
This commit is contained in:
Scott Lahteine
2020-03-01 10:36:15 -06:00
parent 3473b21710
commit c4db8e49a7
12 changed files with 30 additions and 29 deletions
Download Patch File Download Diff File Expand all files Collapse all files

6
Marlin/src/gcode/calibrate/M425.cpp
View File

@ -47,7 +47,7 @@ void GcodeSuite::M425() {
bool noArgs = true;
LOOP_XYZ(a) {
if (parser.seen(axis_codes[a])) {
if (parser.seen(XYZ_CHAR(a))) {
planner.synchronize();
backlash.distance_mm[a] = parser.has_value() ? parser.value_linear_units() : backlash.get_measurement(AxisEnum(a));
noArgs = false;
@ -75,7 +75,7 @@ void GcodeSuite::M425() {
SERIAL_ECHOLNPAIR(" Correction Amount/Fade-out: F", backlash.get_correction(), " (F1.0 = full, F0.0 = none)");
SERIAL_ECHOPGM(" Backlash Distance (mm): ");
LOOP_XYZ(a) {
SERIAL_CHAR(' ', axis_codes[a]);
SERIAL_CHAR(' ', XYZ_CHAR(a));
SERIAL_ECHO(backlash.distance_mm[a]);
SERIAL_EOL();
}
@ -88,7 +88,7 @@ void GcodeSuite::M425() {
SERIAL_ECHOPGM(" Average measured backlash (mm):");
if (backlash.has_any_measurement()) {
LOOP_XYZ(a) if (backlash.has_measurement(AxisEnum(a))) {
SERIAL_CHAR(' ', axis_codes[a]);
SERIAL_CHAR(' ', XYZ_CHAR(a));
SERIAL_ECHO(backlash.get_measurement(AxisEnum(a)));
}
}

4
Marlin/src/gcode/calibrate/M666.cpp
View File

@ -40,10 +40,10 @@
void GcodeSuite::M666() {
if (DEBUGGING(LEVELING)) DEBUG_ECHOLNPGM(">>> M666");
LOOP_XYZ(i) {
if (parser.seen(axis_codes[i])) {
if (parser.seen(XYZ_CHAR(i))) {
const float v = parser.value_linear_units();
if (v * Z_HOME_DIR <= 0) delta_endstop_adj[i] = v;
if (DEBUGGING(LEVELING)) DEBUG_ECHOLNPAIR("delta_endstop_adj[", axis_codes[i], "] = ", delta_endstop_adj[i]);
if (DEBUGGING(LEVELING)) DEBUG_ECHOLNPAIR("delta_endstop_adj[", XYZ_CHAR(i), "] = ", delta_endstop_adj[i]);
}
}
if (DEBUGGING(LEVELING)) DEBUG_ECHOLNPGM("<<< M666");

2
Marlin/src/gcode/control/M605.cpp
View File

@ -138,7 +138,7 @@
HOTEND_LOOP() {
DEBUG_ECHOPAIR_P(SP_T_STR, int(e));
LOOP_XYZ(a) DEBUG_ECHOPAIR(" hotend_offset[", int(e), "].", axis_codes[a] | 0x20, "=", hotend_offset[e][a]);
LOOP_XYZ(a) DEBUG_ECHOPAIR(" hotend_offset[", int(e), "].", XYZ_CHAR(a) | 0x20, "=", hotend_offset[e][a]);
DEBUG_EOL();
}
DEBUG_EOL();

4
Marlin/src/gcode/feature/pause/G61.cpp
View File

@ -56,10 +56,10 @@ void GcodeSuite::G61(void) {
SERIAL_ECHOPAIR(STR_RESTORING_POS " S", int(slot));
LOOP_XYZ(i) {
destination[i] = parser.seen(axis_codes[i])
destination[i] = parser.seen(XYZ_CHAR(i))
? stored_position[slot][i] + parser.value_axis_units((AxisEnum)i)
: current_position[i];
SERIAL_CHAR(' ', axis_codes[i]);
SERIAL_CHAR(' ', XYZ_CHAR(i));
SERIAL_ECHO_F(destination[i]);
}
SERIAL_EOL();

2
Marlin/src/gcode/feature/trinamic/M911-M914.cpp
View File

@ -348,7 +348,7 @@
bool report = true;
const uint8_t index = parser.byteval('I');
LOOP_XYZ(i) if (parser.seen(axis_codes[i])) {
LOOP_XYZ(i) if (parser.seen(XYZ_CHAR(i))) {
const int16_t value = parser.value_int();
report = false;
switch (i) {

2
Marlin/src/gcode/gcode.cpp
View File

@ -135,7 +135,7 @@ void GcodeSuite::get_destination_from_command() {
// Get new XYZ position, whether absolute or relative
LOOP_XYZ(i) {
if ( (seen[i] = parser.seenval(axis_codes[i])) ) {
if ( (seen[i] = parser.seenval(XYZ_CHAR(i))) ) {
const float v = parser.value_axis_units((AxisEnum)i);
if (skip_move)
destination[i] = current_position[i];

2
Marlin/src/gcode/geometry/M206_M428.cpp
View File

@ -38,7 +38,7 @@
*/
void GcodeSuite::M206() {
LOOP_XYZ(i)
if (parser.seen(axis_codes[i]))
if (parser.seen(XYZ_CHAR(i)))
set_home_offset((AxisEnum)i, parser.value_linear_units());
#if ENABLED(MORGAN_SCARA)

4
Marlin/src/gcode/host/M114.cpp
View File

@ -45,8 +45,8 @@
void report_xyz(const xyz_pos_t &pos, const uint8_t precision=3) {
char str[12];
for (uint8_t a = X_AXIS; a <= Z_AXIS; a++) {
SERIAL_CHAR(' ', axis_codes[a], ':');
LOOP_XYZ(a) {
SERIAL_CHAR(' ', XYZ_CHAR(a), ':');
SERIAL_ECHO(dtostrf(pos[a], 1, precision, str));
}
SERIAL_EOL();

4
Marlin/src/gcode/motion/M290.cpp
View File

@ -76,8 +76,8 @@
*/
void GcodeSuite::M290() {
#if ENABLED(BABYSTEP_XY)
for (uint8_t a = X_AXIS; a <= Z_AXIS; a++)
if (parser.seenval(axis_codes[a]) || (a == Z_AXIS && parser.seenval('S'))) {
LOOP_XYZ(a)
if (parser.seenval(XYZ_CHAR(a)) || (a == Z_AXIS && parser.seenval('S'))) {
const float offs = constrain(parser.value_axis_units((AxisEnum)a), -2, 2);
babystep.add_mm((AxisEnum)a, offs);
#if ENABLED(BABYSTEP_ZPROBE_OFFSET)