bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity

Various fixes for MarlinUI and ExtUI (#12439)

Browse Source
This commit is contained in:
Marcio Teixeira 2018-11-17 21:21:44 -07:00 committed by Scott Lahteine
parent d3605cfc26
commit c1e17037e5
24 changed files with 226 additions and 216 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

5
Marlin/Makefile
View File

@ -510,6 +510,7 @@ else ifeq ($(HARDWARE_VARIANT), archim)
VPATH += $(ARDUINO_INSTALL_DIR)/packages/ultimachine/hardware/sam/1.6.9-b/cores/arduino/USB
VPATH += $(ARDUINO_INSTALL_DIR)/packages/ultimachine/hardware/sam/1.6.9-b/libraries/Wire/src
VPATH += $(ARDUINO_INSTALL_DIR)/packages/ultimachine/hardware/sam/1.6.9-b/libraries/SPI/src
VPATH += $(ARDUINO_INSTALL_DIR)/packages/ultimachine/hardware/sam/1.6.9-b/libraries/U8glib/src/clib
VPATH += $(ARDUINO_INSTALL_DIR)/packages/ultimachine/hardware/sam/1.6.9-b/variants/archim
LDSCRIPT = $(ARDUINO_INSTALL_DIR)/packages/ultimachine/hardware/sam/1.6.9-b/variants/archim/linker_scripts/gcc/flash.ld
LDLIBS = $(ARDUINO_INSTALL_DIR)/packages/ultimachine/hardware/sam/1.6.9-b/variants/archim/libsam_sam3x8e_gcc_rel.a
@ -611,6 +612,10 @@ else ifeq ($(HARDWARE_VARIANT), archim)
CDEFS += -DARDUINO_SAM_ARCHIM -DARDUINO_ARCH_SAM -D__SAM3X8E__ -DUSB_VID=0x27b1 -DUSB_PID=0x0001 -DUSBCON '-DUSB_MANUFACTURER="UltiMachine"' '-DUSB_PRODUCT="Archim"'
LIB_CXXSRC += variant.cpp IPAddress.cpp Reset.cpp RingBuffer.cpp Stream.cpp UARTClass.cpp USARTClass.cpp abi.cpp new.cpp watchdog.cpp CDC.cpp PluggableUSB.cpp USBCore.cpp
LIB_SRC += cortex_handlers.c iar_calls_sam3.c syscalls_sam3.c dtostrf.c itoa.c
ifeq ($(U8GLIB), 1)
LIB_SRC += u8g_com_api.c u8g_pb32h1.c
endif
endif
# Add all the source directories as include directories too

2
Marlin/src/core/macros.h
View File

@ -196,7 +196,7 @@
#define MMM_TO_MMS(MM_M) ((MM_M)/60.0f)
#define MMS_TO_MMM(MM_S) ((MM_S)*60.0f)
#define NOOP do{} while(0)
#define NOOP (0)
#define CEILING(x,y) (((x) + (y) - 1) / (y))

4
Marlin/src/core/serial.cpp
View File

@ -25,8 +25,8 @@
uint8_t marlin_debug_flags = MARLIN_DEBUG_NONE;
const char errormagic[] PROGMEM = "Error:";
const char echomagic[] PROGMEM = "echo:";
static const char errormagic[] PROGMEM = "Error:";
static const char echomagic[] PROGMEM = "echo:";
#if NUM_SERIAL > 1
void serialprintPGM_P(const int8_t p, const char * str) {

2
Marlin/src/feature/bedlevel/ubl/ubl_G29.cpp
View File

@ -917,7 +917,7 @@
}
inline void set_message_with_feedback(PGM_P const msg_P) {
ui.setstatusPGM(msg_P);
ui.set_status_P(msg_P);
ui.quick_feedback();
}

9
Marlin/src/feature/pause.cpp
View File

@ -399,14 +399,19 @@ bool pause_print(const float &retract, const point_t &park_point, const float &u
}
/**
* For Paused Print:
* - Show "Press button (or M108) to resume"
*
* For Filament Change:
* - Show "Insert filament and press button to continue"
*
* - Wait for a click before returning
* - Heaters can time out, reheated before accepting a click
* - Heaters can time out and must reheat before continuing
*
* Used by M125 and M600
*/
#if HAS_LCD_MENU && ENABLED(EMERGENCY_PARSER)
#if (HAS_LCD_MENU || ENABLED(EXTENSIBLE_UI)) && ENABLED(EMERGENCY_PARSER)
#define _PMSG(L) L
#elif ENABLED(EMERGENCY_PARSER)
#define _PMSG(L) L##_M108

14
Marlin/src/gcode/bedlevel/G26.cpp
View File

@ -164,7 +164,7 @@ int8_t g26_prime_flag;
*/
bool user_canceled() {
if (!ui.button_pressed()) return false; // Return if the button isn't pressed
ui.setstatusPGM(PSTR("Mesh Validation Stopped."), 99);
ui.set_status_P(PSTR("Mesh Validation Stopped."), 99);
#if HAS_LCD_MENU
ui.quick_feedback();
#endif
@ -414,7 +414,7 @@ inline bool turn_on_heaters() {
if (g26_bed_temp > 25) {
#if ENABLED(ULTRA_LCD)
ui.setstatusPGM(PSTR("G26 Heating Bed."), 99);
ui.set_status_P(PSTR("G26 Heating Bed."), 99);
ui.quick_feedback();
#if HAS_LCD_MENU
ui.capture();
@ -435,7 +435,7 @@ inline bool turn_on_heaters() {
// Start heating the active nozzle
#if ENABLED(ULTRA_LCD)
ui.setstatusPGM(PSTR("G26 Heating Nozzle."), 99);
ui.set_status_P(PSTR("G26 Heating Nozzle."), 99);
ui.quick_feedback();
#endif
thermalManager.setTargetHotend(g26_hotend_temp, active_extruder);
@ -469,7 +469,7 @@ inline bool prime_nozzle() {
if (g26_prime_flag == -1) { // The user wants to control how much filament gets purged
ui.capture();
ui.setstatusPGM(PSTR("User-Controlled Prime"), 99);
ui.set_status_P(PSTR("User-Controlled Prime"), 99);
ui.chirp();
set_destination_from_current();
@ -493,7 +493,7 @@ inline bool prime_nozzle() {
ui.wait_for_release();
ui.setstatusPGM(PSTR("Done Priming"), 99);
ui.set_status_P(PSTR("Done Priming"), 99);
ui.quick_feedback();
ui.release();
}
@ -501,7 +501,7 @@ inline bool prime_nozzle() {
#endif
{
#if ENABLED(ULTRA_LCD)
ui.setstatusPGM(PSTR("Fixed Length Prime."), 99);
ui.set_status_P(PSTR("Fixed Length Prime."), 99);
ui.quick_feedback();
#endif
set_destination_from_current();
@ -894,7 +894,7 @@ void GcodeSuite::G26() {
} while (--g26_repeats && location.x_index >= 0 && location.y_index >= 0);
LEAVE:
ui.setstatusPGM(PSTR("Leaving G26"), -1);
ui.set_status_P(PSTR("Leaving G26"), -1);
retract_filament(destination);
destination[Z_AXIS] = Z_CLEARANCE_BETWEEN_PROBES;

8
Marlin/src/gcode/calibrate/G33.cpp
View File

@ -522,7 +522,7 @@ void GcodeSuite::G33() {
if (verbose_level == 0) SERIAL_PROTOCOLPGM(" (DRY-RUN)");
if (set_up) SERIAL_PROTOCOLPGM(" (SET-UP)");
SERIAL_EOL();
ui.setstatusPGM(checkingac);
ui.set_status_P(checkingac);
print_calibration_settings(_endstop_results, _angle_results);
@ -683,7 +683,7 @@ void GcodeSuite::G33() {
sprintf_P(&mess[15], PSTR("0.%03i"), (int)LROUND(zero_std_dev_min * 1000.0));
else
sprintf_P(&mess[15], PSTR("%03i.x"), (int)LROUND(zero_std_dev_min));
ui.setstatus(mess);
ui.set_status(mess);
print_calibration_settings(_endstop_results, _angle_results);
serialprintPGM(save_message);
SERIAL_EOL();
@ -699,7 +699,7 @@ void GcodeSuite::G33() {
SERIAL_PROTOCOLPGM("std dev:");
SERIAL_PROTOCOL_F(zero_std_dev, 3);
SERIAL_EOL();
ui.setstatus(mess);
ui.set_status(mess);
if (verbose_level > 1)
print_calibration_settings(_endstop_results, _angle_results);
}
@ -719,7 +719,7 @@ void GcodeSuite::G33() {
sprintf_P(&mess[15], PSTR("0.%03i"), (int)LROUND(zero_std_dev * 1000.0));
else
sprintf_P(&mess[15], PSTR("%03i.x"), (int)LROUND(zero_std_dev));
ui.setstatus(mess);
ui.set_status(mess);
}
ac_home();
}

2
Marlin/src/gcode/lcd/M0_M1.cpp
View File

@ -62,7 +62,7 @@ void GcodeSuite::M0_M1() {
#if HAS_LCD_MENU
if (has_message)
ui.setstatus(args, true);
ui.set_status(args, true);
else {
LCD_MESSAGEPGM(MSG_USERWAIT);
#if ENABLED(LCD_PROGRESS_BAR) && PROGRESS_MSG_EXPIRE > 0

2
Marlin/src/gcode/lcd/M117.cpp
View File

@ -28,6 +28,6 @@
*/
void GcodeSuite::M117() {
ui.setstatus(parser.string_arg);
ui.set_status(parser.string_arg);
}

3
Marlin/src/gcode/sdcard/M20-M30_M32-M34_M524_M928.cpp
View File

@ -28,6 +28,7 @@
#include "../../sd/cardreader.h"
#include "../../module/printcounter.h"
#include "../../module/stepper.h"
#include "../../lcd/ultralcd.h"
#if ENABLED(POWER_LOSS_RECOVERY)
#include "../../feature/power_loss_recovery.h"
@ -100,6 +101,8 @@ void GcodeSuite::M24() {
else
#endif
print_job_timer.start();
ui.reset_status();
}
/**

2
Marlin/src/gcode/stats/M31.cpp
View File

@ -40,7 +40,7 @@ void GcodeSuite::M31() {
char buffer[21];
duration_t elapsed = print_job_timer.duration();
elapsed.toString(buffer);
ui.setstatus(buffer);
ui.set_status(buffer);
SERIAL_ECHO_START_P(port);
SERIAL_ECHOLNPAIR_P(port, "Print time: ", buffer);

2
Marlin/src/gcode/temperature/M140_M190.cpp
View File

@ -64,7 +64,7 @@ void GcodeSuite::M190() {
}
else return;
ui.setstatusPGM(thermalManager.isHeatingBed() ? PSTR(MSG_BED_HEATING) : PSTR(MSG_BED_COOLING));
ui.set_status_P(thermalManager.isHeatingBed() ? PSTR(MSG_BED_HEATING) : PSTR(MSG_BED_COOLING));
thermalManager.wait_for_bed(no_wait_for_cooling);
}

12
Marlin/src/lcd/dogm/status_screen_lite_ST7920.cpp
View File

@ -99,10 +99,6 @@ void ST7920_Lite_Status_Screen::write_str_P(PGM_P const str) {
while (char c = pgm_read_byte(p_str++)) write_byte(c);
}
void ST7920_Lite_Status_Screen::write_str(progmem_str str) {
write_str_P((PGM_P)str);
}
void ST7920_Lite_Status_Screen::write_number(const int16_t value, const uint8_t digits/*=3*/) {
char str[7];
PGM_P fmt;
@ -501,11 +497,11 @@ void ST7920_Lite_Status_Screen::draw_progress_bar(const uint8_t value) {
// Draw centered
if (value > 9) {
write_number(value, 4);
write_str(F("% "));
write_str_P(PSTR("% "));
}
else {
write_number(value, 3);
write_str(F("% "));
write_str_P(PSTR("% "));
}
}
@ -558,12 +554,12 @@ void ST7920_Lite_Status_Screen::draw_temps(uint8_t line, const int16_t temp, con
write_number(temp);
if (showTarget) {
write_str(F("\x1A"));
write_byte('\x1A');
write_number(target);
};
if (targetStateChange) {
if (!showTarget) write_str(F(" "));
if (!showTarget) write_str_P(PSTR(" "));
draw_degree_symbol(5, line, !showTarget);
draw_degree_symbol(9, line, showTarget);
}

3
Marlin/src/lcd/dogm/status_screen_lite_ST7920.h
View File

@ -18,8 +18,6 @@
#include "../../core/macros.h"
#include "../../libs/duration_t.h"
typedef const __FlashStringHelper *progmem_str;
class ST7920_Lite_Status_Screen {
private:
static struct st7920_state_t {
@ -47,7 +45,6 @@ class ST7920_Lite_Status_Screen {
static void write_str(const char *str);
static void write_str(const char *str, const uint8_t len);
static void write_str_P(PGM_P const str);
static void write_str(progmem_str str);
static void write_number(const int16_t value, const uint8_t digits=3);
static void _extended_function_set(const bool extended, const bool graphics);

3
Marlin/src/lcd/extensible_ui/lib/example.cpp
View File

@ -55,8 +55,7 @@ namespace ExtUI {
void onPrintTimerPaused() {}
void onPrintTimerStopped() {}
void onFilamentRunout() {}
void onStatusChanged(const char* msg) {}
void onStatusChanged(progmem_str msg) {}
void onStatusChanged(const char * const msg) {}
void onFactoryReset() {}
void onLoadSettings() {}
void onStoreSettings() {}

65
Marlin/src/lcd/extensible_ui/ui_api.cpp
View File

@ -94,6 +94,7 @@ static struct {
} flags;
namespace ExtUI {
#ifdef __SAM3X8E__
/**
* Implement a special millis() to allow time measurement
@ -134,12 +135,7 @@ namespace ExtUI {
return (uint32_t)(currTime / (F_CPU / 8000));
}
#else
// TODO: Implement for AVR
FORCE_INLINE uint32_t safe_millis() { return millis(); }
#endif
#endif // __SAM3X8E__
void delay_us(unsigned long us) {
DELAY_US(us);
@ -287,12 +283,14 @@ namespace ExtUI {
}
void setActiveTool(const extruder_t extruder, bool no_move) {
const uint8_t e = extruder - E0;
#if DO_SWITCH_EXTRUDER || ENABLED(SWITCHING_NOZZLE) || ENABLED(PARKING_EXTRUDER)
if (e != active_extruder)
tool_change(e, 0, no_move);
#if EXTRUDERS > 1
const uint8_t e = extruder - E0;
#if DO_SWITCH_EXTRUDER || ENABLED(SWITCHING_NOZZLE) || ENABLED(PARKING_EXTRUDER)
if (e != active_extruder)
tool_change(e, 0, no_move);
#endif
active_extruder = e;
#endif
active_extruder = e;
}
extruder_t getActiveTool() {
@ -533,24 +531,26 @@ namespace ExtUI {
float getFeedrate_percent() { return feedrate_percentage; }
void enqueueCommands(progmem_str gcode) {
enqueue_and_echo_commands_P((PGM_P)gcode);
void enqueueCommands_P(PGM_P const gcode) {
enqueue_and_echo_commands_P(gcode);
}
bool isAxisPositionKnown(const axis_t axis) {
return TEST(axis_known_position, axis);
}
progmem_str getFirmwareName_str() {
return F("Marlin " SHORT_BUILD_VERSION);
PGM_P getFirmwareName_str() {
static const char firmware_name[] PROGMEM = "Marlin " SHORT_BUILD_VERSION;
return firmware_name;
}
void setTargetTemp_celsius(float value, const heater_t heater) {
#if HAS_HEATED_BED
if (heater == BED)
thermalManager.setTargetBed(clamp(value,0,200));
if (heater == BED)
thermalManager.setTargetBed(clamp(value,0,200));
else
#endif
thermalManager.setTargetHotend(clamp(value,0,500), heater - H0);
thermalManager.setTargetHotend(clamp(value,0,500), heater - H0);
}
void setTargetTemp_celsius(float value, const extruder_t extruder) {
@ -579,7 +579,7 @@ namespace ExtUI {
}
bool isPrinting() {
return (planner.movesplanned() || IS_SD_PRINTING() || isPrintingFromMedia());
return (planner.movesplanned() || isPrintingFromMedia() || IFSD(IS_SD_PRINTING(), false));
}
bool isMediaInserted() {
@ -593,19 +593,20 @@ namespace ExtUI {
#if ENABLED(PARK_HEAD_ON_PAUSE)
enqueue_and_echo_commands_P(PSTR("M125"));
#endif
ExtUI::onStatusChanged(PSTR(MSG_PRINT_PAUSED));
ui.set_status_P(PSTR(MSG_PRINT_PAUSED));
#endif
}
void resumePrint() {
#if ENABLED(SDSUPPORT)
ui.set_status_P(PSTR(MSG_FILAMENT_CHANGE_RESUME_1));
#if ENABLED(PARK_HEAD_ON_PAUSE)
wait_for_heatup = wait_for_user = false;
enqueue_and_echo_commands_P(PSTR("M24"));
#else
card.startFileprint();
print_job_timer.start();
#endif
ExtUI::onStatusChanged(PSTR(MSG_PRINTING));
#endif
}
@ -613,7 +614,7 @@ namespace ExtUI {
#if ENABLED(SDSUPPORT)
wait_for_heatup = wait_for_user = false;
card.flag.abort_sd_printing = true;
ExtUI::onStatusChanged(PSTR(MSG_PRINT_ABORTED));
ui.set_status_P(PSTR(MSG_PRINT_ABORTED));
#endif
}
@ -621,7 +622,7 @@ namespace ExtUI {
void FileList::refresh() { num_files = 0xFFFF; }
bool FileList::seek(uint16_t pos, bool skip_range_check) {
bool FileList::seek(const uint16_t pos, const bool skip_range_check) {
#if ENABLED(SDSUPPORT)
if (!skip_range_check && pos > (count() - 1)) return false;
const uint16_t nr =
@ -632,6 +633,8 @@ namespace ExtUI {
card.getfilename_sorted(nr);
return card.filename && card.filename[0] != '\0';
#else
return false;
#endif
}
@ -671,7 +674,7 @@ namespace ExtUI {
#endif
}
void FileList::changeDir(const char *dirname) {
void FileList::changeDir(const char * const dirname) {
#if ENABLED(SDSUPPORT)
card.chdir(dirname);
num_files = 0xFFFF;
@ -713,20 +716,6 @@ void MarlinUI::update() {
ExtUI::onIdle();
}
void MarlinUI::setstatus(const char * const message, const bool persist/*=false*/) { ExtUI::onStatusChanged(message); }
void MarlinUI::setstatusPGM(PGM_P const message, int8_t level/*=0*/) { ExtUI::onStatusChanged((progmem_str)message); }
void MarlinUI::setalertstatusPGM(PGM_P const message) { setstatusPGM(message, 0); }
void MarlinUI::status_printf_P(const uint8_t level, const char * const fmt, ...) {
char buff[64];
va_list args;
va_start(args, fmt);
vsnprintf_P(buff, sizeof(buff), fmt, args);
va_end(args);
buff[63] = '\0';
ExtUI::onStatusChanged(buff);
}
void MarlinUI::kill_screen(PGM_P const msg) {
if (!flags.printer_killed) {
flags.printer_killed = true;

20
Marlin/src/lcd/extensible_ui/ui_api.h
View File

@ -45,8 +45,6 @@
#include "../../inc/MarlinConfig.h"
typedef const __FlashStringHelper *progmem_str;
namespace ExtUI {
enum axis_t : uint8_t { X, Y, Z };
@ -62,13 +60,13 @@ namespace ExtUI {
bool isAxisPositionKnown(const axis_t);
bool canMove(const axis_t);
bool canMove(const extruder_t);
void enqueueCommands(progmem_str);
void enqueueCommands_P(PGM_P const);
/**
* Getters and setters
* Should be used by the EXTENSIBLE_UI to query or change Marlin's state.
*/
progmem_str getFirmwareName_str();
PGM_P getFirmwareName_str();
float getActualTemp_celsius(const heater_t);
float getActualTemp_celsius(const extruder_t);
@ -178,7 +176,12 @@ namespace ExtUI {
* safe_millis must be called at least every 1 sec to guarantee time
* yield should be called within lengthy loops
*/
uint32_t safe_millis();
#ifdef __SAM3X8E__
uint32_t safe_millis();
#else
#define safe_millis() millis() // TODO: Implement for AVR
#endif
void delay_us(unsigned long us);
void delay_ms(unsigned long ms);
void yield();
@ -205,14 +208,14 @@ namespace ExtUI {
public:
FileList();
void refresh();
bool seek(uint16_t, bool skip_range_check = false);
bool seek(const uint16_t, const bool skip_range_check = false);
const char *longFilename();
const char *shortFilename();
const char *filename();
bool isDir();
void changeDir(const char *dirname);
void changeDir(const char * const dirname);
void upDir();
bool isAtRootDir();
uint16_t count();
@ -234,8 +237,7 @@ namespace ExtUI {
void onPrintTimerPaused();
void onPrintTimerStopped();
void onFilamentRunout();
void onStatusChanged(const char* msg);
void onStatusChanged(progmem_str msg);
void onStatusChanged(const char * const msg);
void onFactoryReset();
void onStoreSettings();
void onLoadSettings();

2
Marlin/src/lcd/malyanlcd.cpp
View File

@ -480,7 +480,7 @@ void MarlinUI::init() {
/**
* Set an alert.
*/
void MarlinUI::setalertstatusPGM(PGM_P const message) {
void MarlinUI::set_alert_status_P(PGM_P const message) {
write_to_lcd_P(PSTR("{E:"));
write_to_lcd_P(message);
write_to_lcd_P("}");

2
Marlin/src/lcd/menu/menu_main.cpp
View File

@ -59,7 +59,7 @@
void lcd_sdcard_stop() {
wait_for_heatup = wait_for_user = false;
card.flag.abort_sd_printing = true;
ui.setstatusPGM(PSTR(MSG_PRINT_ABORTED), -1);
ui.set_status_P(PSTR(MSG_PRINT_ABORTED), -1);
ui.return_to_status();
}

232
Marlin/src/lcd/ultralcd.cpp
View File

@ -29,6 +29,16 @@
#include "../sd/cardreader.h"
#endif
MarlinUI ui;
#if ENABLED(SDSUPPORT)
#include "../sd/cardreader.h"
#endif
#if ENABLED(EXTENSIBLE_UI)
#define START_OF_UTF8_CHAR(C) (((C) & 0xC0u) != 0x80u)
#endif
#define MAX_MESSAGE_LENGTH 63
uint8_t MarlinUI::status_message_level; // = 0
char MarlinUI::status_message[MAX_MESSAGE_LENGTH + 1];
#endif
#if HAS_SPI_LCD
@ -86,9 +96,7 @@
bool MarlinUI::defer_return_to_status;
#endif
char MarlinUI::status_message[MAX_MESSAGE_LENGTH + 1];
uint8_t MarlinUI::lcd_status_update_delay = 1; // First update one loop delayed
uint8_t MarlinUI::status_message_level; // = 0
#if ENABLED(FILAMENT_LCD_DISPLAY) && ENABLED(SDSUPPORT)
millis_t MarlinUI::next_filament_display; // = 0
@ -475,7 +483,7 @@ void MarlinUI::status_screen() {
void MarlinUI::kill_screen(PGM_P lcd_msg) {
init();
setalertstatusPGM(lcd_msg);
set_alert_status_P(lcd_msg);
draw_kill_screen();
}
@ -674,11 +682,11 @@ void MarlinUI::update() {
if (old_sd_status == 2)
card.beginautostart(); // Initial boot
else
setstatusPGM(PSTR(MSG_SD_INSERTED));
set_status_P(PSTR(MSG_SD_INSERTED));
}
else {
card.release();
if (old_sd_status != 2) setstatusPGM(PSTR(MSG_SD_REMOVED));
if (old_sd_status != 2) set_status_P(PSTR(MSG_SD_REMOVED));
}
refresh();
@ -1083,111 +1091,119 @@ void MarlinUI::update() {
#endif // HAS_ENCODER_ACTION
////////////////////////////////////////////
/////////////// Status Line ////////////////
////////////////////////////////////////////
void MarlinUI::finishstatus(const bool persist) {
#if !(ENABLED(LCD_PROGRESS_BAR) && (PROGRESS_MSG_EXPIRE > 0))
UNUSED(persist);
#endif
#if ENABLED(LCD_PROGRESS_BAR)
progress_bar_ms = millis();
#if PROGRESS_MSG_EXPIRE > 0
expire_status_ms = persist ? 0 : progress_bar_ms + PROGRESS_MSG_EXPIRE;
#endif
#endif
#if ENABLED(FILAMENT_LCD_DISPLAY) && ENABLED(SDSUPPORT)
next_filament_display = millis() + 5000UL; // Show status message for 5s
#endif
#if ENABLED(STATUS_MESSAGE_SCROLLING)
status_scroll_offset = 0;
#endif
refresh();
}
bool MarlinUI::has_status() { return (status_message[0] != '\0'); }
void MarlinUI::setstatus(const char * const message, const bool persist) {
if (status_message_level > 0) return;
// Here we have a problem. The message is encoded in UTF8, so
// arbitrarily cutting it will be a problem. We MUST be sure
// that there is no cutting in the middle of a multibyte character!
// Get a pointer to the null terminator
const char* pend = message + strlen(message);
// If length of supplied UTF8 string is greater than
// our buffer size, start cutting whole UTF8 chars
while ((pend - message) > MAX_MESSAGE_LENGTH) {
--pend;
while (!START_OF_UTF8_CHAR(*pend)) --pend;
};
// At this point, we have the proper cut point. Use it
uint8_t maxLen = pend - message;
strncpy(status_message, message, maxLen);
status_message[maxLen] = '\0';
finishstatus(persist);
}
#include <stdarg.h>
void MarlinUI::status_printf_P(const uint8_t level, PGM_P const fmt, ...) {
if (level < status_message_level) return;
status_message_level = level;
va_list args;
va_start(args, fmt);
vsnprintf_P(status_message, MAX_MESSAGE_LENGTH, fmt, args);
va_end(args);
finishstatus(level > 0);
}
void MarlinUI::setstatusPGM(PGM_P const message, int8_t level) {
if (level < 0) level = status_message_level = 0;
if (level < status_message_level) return;
status_message_level = level;
// Here we have a problem. The message is encoded in UTF8, so
// arbitrarily cutting it will be a problem. We MUST be sure
// that there is no cutting in the middle of a multibyte character!
// Get a pointer to the null terminator
PGM_P pend = message + strlen_P(message);
// If length of supplied UTF8 string is greater than
// our buffer size, start cutting whole UTF8 chars
while ((pend - message) > MAX_MESSAGE_LENGTH) {
--pend;
while (!START_OF_UTF8_CHAR(pgm_read_byte(pend))) --pend;
};
// At this point, we have the proper cut point. Use it
uint8_t maxLen = pend - message;
strncpy_P(status_message, message, maxLen);
status_message[maxLen] = '\0';
finishstatus(level > 0);
}
void MarlinUI::setalertstatusPGM(PGM_P const message) {
setstatusPGM(message, 1);
#if HAS_LCD_MENU
return_to_status();
#endif
}
#endif // HAS_SPI_LCD
#if HAS_SPI_LCD || ENABLED(EXTENSIBLE_UI)
#if ENABLED(EXTENSIBLE_UI)
#include "extensible_ui/ui_api.h"
#endif
////////////////////////////////////////////
/////////////// Status Line ////////////////
////////////////////////////////////////////
void MarlinUI::finishstatus(const bool persist) {
#if !(ENABLED(LCD_PROGRESS_BAR) && (PROGRESS_MSG_EXPIRE > 0))
UNUSED(persist);
#endif
#if ENABLED(LCD_PROGRESS_BAR)
progress_bar_ms = millis();
#if PROGRESS_MSG_EXPIRE > 0
expire_status_ms = persist ? 0 : progress_bar_ms + PROGRESS_MSG_EXPIRE;
#endif
#endif
#if ENABLED(FILAMENT_LCD_DISPLAY) && ENABLED(SDSUPPORT)
next_filament_display = millis() + 5000UL; // Show status message for 5s
#endif
#if ENABLED(STATUS_MESSAGE_SCROLLING)
status_scroll_offset = 0;
#endif
#if ENABLED(EXTENSIBLE_UI)
ExtUI::onStatusChanged(status_message);
#endif
refresh();
}
bool MarlinUI::has_status() { return (status_message[0] != '\0'); }
void MarlinUI::set_status(const char * const message, const bool persist) {
if (status_message_level > 0) return;
// Here we have a problem. The message is encoded in UTF8, so
// arbitrarily cutting it will be a problem. We MUST be sure
// that there is no cutting in the middle of a multibyte character!
// Get a pointer to the null terminator
const char* pend = message + strlen(message);
// If length of supplied UTF8 string is greater than
// our buffer size, start cutting whole UTF8 chars
while ((pend - message) > MAX_MESSAGE_LENGTH) {
--pend;
while (!START_OF_UTF8_CHAR(*pend)) --pend;
};
// At this point, we have the proper cut point. Use it
uint8_t maxLen = pend - message;
strncpy(status_message, message, maxLen);
status_message[maxLen] = '\0';
finishstatus(persist);
}
#include <stdarg.h>
void MarlinUI::status_printf_P(const uint8_t level, PGM_P const fmt, ...) {
if (level < status_message_level) return;
status_message_level = level;
va_list args;
va_start(args, fmt);
vsnprintf_P(status_message, MAX_MESSAGE_LENGTH, fmt, args);
va_end(args);
finishstatus(level > 0);
}
void MarlinUI::set_status_P(PGM_P const message, int8_t level) {
if (level < 0) level = status_message_level = 0;
if (level < status_message_level) return;
status_message_level = level;
// Here we have a problem. The message is encoded in UTF8, so
// arbitrarily cutting it will be a problem. We MUST be sure
// that there is no cutting in the middle of a multibyte character!
// Get a pointer to the null terminator
PGM_P pend = message + strlen_P(message);
// If length of supplied UTF8 string is greater than
// our buffer size, start cutting whole UTF8 chars
while ((pend - message) > MAX_MESSAGE_LENGTH) {
--pend;
while (!START_OF_UTF8_CHAR(pgm_read_byte(pend))) --pend;
};
// At this point, we have the proper cut point. Use it
uint8_t maxLen = pend - message;
strncpy_P(status_message, message, maxLen);
status_message[maxLen] = '\0';
finishstatus(level > 0);
}
void MarlinUI::set_alert_status_P(PGM_P const message) {
set_status_P(message, 1);
#if HAS_LCD_MENU
return_to_status();
#endif
}
#include "../module/printcounter.h"
/**
@ -1202,14 +1218,14 @@ void MarlinUI::setalertstatusPGM(PGM_P const message) {
msg = paused;
#if ENABLED(SDSUPPORT)
else if (IS_SD_PRINTING())
return setstatus(card.longest_filename(), true);
return set_status(card.longest_filename(), true);
#endif
else if (print_job_timer.isRunning())
msg = printing;
else
msg = welcome;
setstatusPGM(msg, -1);
set_status_P(msg, -1);
}
#endif

40
Marlin/src/lcd/ultralcd.h
View File

@ -243,15 +243,22 @@ public:
#if HAS_SPI_LCD || ENABLED(MALYAN_LCD) || ENABLED(EXTENSIBLE_UI)
static void init();
static void update();
static void setalertstatusPGM(PGM_P message);
static void set_alert_status_P(PGM_P message);
#else // NO LCD
static inline void init() {}
static inline void update() {}
static inline void setalertstatusPGM(PGM_P message) { UNUSED(message); }
static inline void set_alert_status_P(PGM_P message) { UNUSED(message); }
#endif
#if HAS_SPI_LCD || ENABLED(EXTENSIBLE_UI)
static char status_message[];
static bool has_status();
static uint8_t status_message_level; // Higher levels block lower levels
static inline void reset_alert_level() { status_message_level = 0; }
#if HAS_SPI_LCD
static bool detected();
@ -296,16 +303,10 @@ public:
#endif
// Status message
static char status_message[];
#if ENABLED(STATUS_MESSAGE_SCROLLING)
static uint8_t status_scroll_offset;
#endif
static bool has_status();
static uint8_t lcd_status_update_delay;
static uint8_t status_message_level; // Higher levels block lower levels
static inline void reset_alert_level() { status_message_level = 0; }
#if HAS_PRINT_PROGRESS
#if ENABLED(LCD_SET_PROGRESS_MANUALLY)
@ -341,26 +342,22 @@ public:
static void status_screen();
#else
static void refresh() {}
static inline void reset_alert_level() {}
static constexpr bool has_status() { return true; }
#endif
static bool get_blink();
static void kill_screen(PGM_P const lcd_msg);
static void draw_kill_screen();
static void setstatus(const char* const message, const bool persist=false);
static void setstatusPGM(PGM_P const message, const int8_t level=0);
static void set_status(const char* const message, const bool persist=false);
static void set_status_P(PGM_P const message, const int8_t level=0);
static void status_printf_P(const uint8_t level, PGM_P const fmt, ...);
static void reset_status();
#else // MALYAN_LCD or NO LCD
static inline void refresh() {}
static inline void setstatus(const char* const message, const bool persist=false) { UNUSED(message); UNUSED(persist); }
static inline void setstatusPGM(PGM_P const message, const int8_t level=0) { UNUSED(message); UNUSED(level); }
static inline void set_status(const char* const message, const bool persist=false) { UNUSED(message); UNUSED(persist); }
static inline void set_status_P(PGM_P const message, const int8_t level=0) { UNUSED(message); UNUSED(level); }
static inline void status_printf_P(const uint8_t level, PGM_P const fmt, ...) { UNUSED(level); UNUSED(fmt); }
static inline void reset_status() {}
static inline void reset_alert_level() {}
@ -508,6 +505,10 @@ private:
static void _synchronize();
#if HAS_SPI_LCD || ENABLED(EXTENSIBLE_UI)
static void finishstatus(const bool persist);
#endif
#if HAS_SPI_LCD
#if HAS_LCD_MENU
#if LCD_TIMEOUT_TO_STATUS
@ -517,13 +518,10 @@ private:
#endif
#endif
static void draw_status_screen();
static void finishstatus(const bool persist);
#else
static inline void finishstatus(const bool persist) { UNUSED(persist); refresh(); }
#endif
};
extern MarlinUI ui;
#define LCD_MESSAGEPGM(x) ui.setstatusPGM(PSTR(x))
#define LCD_ALERTMESSAGEPGM(x) ui.setalertstatusPGM(PSTR(x))
#define LCD_MESSAGEPGM(x) ui.set_status_P(PSTR(x))
#define LCD_ALERTMESSAGEPGM(x) ui.set_alert_status_P(PSTR(x))

2
Marlin/src/module/probe.cpp
View File

@ -371,7 +371,7 @@ FORCE_INLINE void probe_specific_action(const bool deploy) {
PGM_P const ds_str = deploy ? PSTR(MSG_MANUAL_DEPLOY) : PSTR(MSG_MANUAL_STOW);
ui.return_to_status(); // To display the new status message
ui.setstatusPGM(ds_str, 99);
ui.set_status_P(ds_str, 99);
serialprintPGM(ds_str);
SERIAL_EOL();

2
Marlin/src/module/temperature.cpp
View File

@ -2464,7 +2464,7 @@ void Temperature::isr() {
#if HOTENDS > 1
ui.status_printf_P(0, heating ? PSTR("E%i " MSG_HEATING) : PSTR("E%i " MSG_COOLING), int(e + 1));
#else
ui.setstatusPGM(heating ? PSTR("E " MSG_HEATING) : PSTR("E " MSG_COOLING));
ui.set_status_P(heating ? PSTR("E " MSG_HEATING) : PSTR("E " MSG_COOLING));
#endif
}
#endif

4
Marlin/src/sd/cardreader.cpp
View File

@ -521,7 +521,7 @@ void CardReader::openFile(char * const path, const bool read, const bool subcall
SERIAL_PROTOCOLLNPGM(MSG_SD_FILE_SELECTED);
getfilename(0, fname);
ui.setstatus(longFilename[0] ? longFilename : fname);
ui.set_status(longFilename[0] ? longFilename : fname);
//if (longFilename[0]) {
// SERIAL_PROTOCOLPAIR(MSG_SD_FILE_LONG_NAME, longFilename);
//}
@ -545,7 +545,7 @@ void CardReader::openFile(char * const path, const bool read, const bool subcall
emergency_parser.disable();
#endif
SERIAL_PROTOCOLLNPAIR(MSG_SD_WRITE_TO_FILE, fname);
ui.setstatus(fname);
ui.set_status(fname);
}
}
}