Filament Runout Inverting => State (#18537)

Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
This commit is contained in:
Robby Candra 2020-07-06 05:42:19 +07:00 committed by GitHub
parent c8f7aceb20
commit c02451b602
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
7 changed files with 19 additions and 8 deletions

View File

@ -1167,7 +1167,7 @@
//#define FILAMENT_RUNOUT_SENSOR //#define FILAMENT_RUNOUT_SENSOR
#if ENABLED(FILAMENT_RUNOUT_SENSOR) #if ENABLED(FILAMENT_RUNOUT_SENSOR)
#define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each.
#define FIL_RUNOUT_INVERTING false // Set to true to invert the logic of the sensor. #define FIL_RUNOUT_STATE LOW // Pin state indicating that filament is NOT present.
#define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins.
//#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins.

View File

@ -161,7 +161,7 @@ uint8_t MMU2::get_current_tool() {
} }
#if EITHER(PRUSA_MMU2_S_MODE, MMU_EXTRUDER_SENSOR) #if EITHER(PRUSA_MMU2_S_MODE, MMU_EXTRUDER_SENSOR)
#define FILAMENT_PRESENT() (READ(FIL_RUNOUT_PIN) != FIL_RUNOUT_INVERTING) #define FILAMENT_PRESENT() (READ(FIL_RUNOUT_PIN) != FIL_RUNOUT_STATE)
#endif #endif
void MMU2::mmu_loop() { void MMU2::mmu_loop() {

View File

@ -148,7 +148,7 @@ class FilamentSensorBase {
// Return a bitmask of runout flag states (1 bits always indicates runout) // Return a bitmask of runout flag states (1 bits always indicates runout)
static inline uint8_t poll_runout_states() { static inline uint8_t poll_runout_states() {
return poll_runout_pins() ^ uint8_t(TERN(FIL_RUNOUT_INVERTING, 0, _BV(NUM_RUNOUT_SENSORS) - 1)); return poll_runout_pins() ^ uint8_t(TERN(FIL_RUNOUT_STATE, 0, _BV(NUM_RUNOUT_SENSORS) - 1));
} }
}; };

View File

@ -84,7 +84,7 @@ void GcodeSuite::M600() {
// In this case, for duplicating modes set DXC_ext to the extruder that ran out. // In this case, for duplicating modes set DXC_ext to the extruder that ran out.
#if HAS_FILAMENT_SENSOR && NUM_RUNOUT_SENSORS > 1 #if HAS_FILAMENT_SENSOR && NUM_RUNOUT_SENSORS > 1
if (dxc_is_duplicating()) if (dxc_is_duplicating())
DXC_ext = (READ(FIL_RUNOUT2_PIN) == FIL_RUNOUT_INVERTING) ? 1 : 0; DXC_ext = (READ(FIL_RUNOUT2_PIN) == FIL_RUNOUT_STATE) ? 1 : 0;
#else #else
DXC_ext = active_extruder; DXC_ext = active_extruder;
#endif #endif

View File

@ -513,6 +513,17 @@
#error "DIGIPOT_I2C is now DIGIPOT_MCP4451 (or DIGIPOT_MCP4018). Please update Configuration_adv.h." #error "DIGIPOT_I2C is now DIGIPOT_MCP4451 (or DIGIPOT_MCP4018). Please update Configuration_adv.h."
#endif #endif
#ifdef FIL_RUNOUT_INVERTING
#if FIL_RUNOUT_INVERTING
#warning "FIL_RUNOUT_INVERTING true is now FIL_RUNOUT_STATE HIGH. Please update Configuration.h."
#else
#warning "FIL_RUNOUT_INVERTING false is now FIL_RUNOUT_STATE LOW. Please update Configuration.h."
#endif
#ifndef FIL_RUNOUT_STATE
#define FIL_RUNOUT_STATE ((FIL_RUNOUT_INVERTING) ? HIGH : LOW)
#endif
#endif
/** /**
* Probe temp compensation requirements * Probe temp compensation requirements
*/ */

View File

@ -92,12 +92,12 @@ void EndstopStatesScreen::onRedraw(draw_mode_t) {
PIN_DISABLED(5, 3, PSTR(STR_Z_MIN), Z_MIN) PIN_DISABLED(5, 3, PSTR(STR_Z_MIN), Z_MIN)
#endif #endif
#if ENABLED(FILAMENT_RUNOUT_SENSOR) && PIN_EXISTS(FIL_RUNOUT) #if ENABLED(FILAMENT_RUNOUT_SENSOR) && PIN_EXISTS(FIL_RUNOUT)
PIN_ENABLED (1, 4, GET_TEXT_F(MSG_RUNOUT_1), FIL_RUNOUT, FIL_RUNOUT_INVERTING) PIN_ENABLED (1, 4, GET_TEXT_F(MSG_RUNOUT_1), FIL_RUNOUT, FIL_RUNOUT_STATE)
#else #else
PIN_DISABLED(1, 4, GET_TEXT_F(MSG_RUNOUT_1), FIL_RUNOUT) PIN_DISABLED(1, 4, GET_TEXT_F(MSG_RUNOUT_1), FIL_RUNOUT)
#endif #endif
#if ENABLED(FILAMENT_RUNOUT_SENSOR) && PIN_EXISTS(FIL_RUNOUT2) && EXTRUDERS > 1 #if ENABLED(FILAMENT_RUNOUT_SENSOR) && PIN_EXISTS(FIL_RUNOUT2) && EXTRUDERS > 1
PIN_ENABLED (3, 4, GET_TEXT_F(MSG_RUNOUT_2), FIL_RUNOUT2, FIL_RUNOUT_INVERTING) PIN_ENABLED (3, 4, GET_TEXT_F(MSG_RUNOUT_2), FIL_RUNOUT2, FIL_RUNOUT_STATE)
#else #else
PIN_DISABLED(3, 4, GET_TEXT_F(MSG_RUNOUT_2), FIL_RUNOUT2) PIN_DISABLED(3, 4, GET_TEXT_F(MSG_RUNOUT_2), FIL_RUNOUT2)
#endif #endif

View File

@ -459,7 +459,7 @@ void _O2 Endstops::report_states() {
#endif #endif
#if HAS_FILAMENT_SENSOR #if HAS_FILAMENT_SENSOR
#if NUM_RUNOUT_SENSORS == 1 #if NUM_RUNOUT_SENSORS == 1
print_es_state(READ(FIL_RUNOUT_PIN) != FIL_RUNOUT_INVERTING, PSTR(STR_FILAMENT_RUNOUT_SENSOR)); print_es_state(READ(FIL_RUNOUT_PIN) != FIL_RUNOUT_STATE, PSTR(STR_FILAMENT_RUNOUT_SENSOR));
#else #else
#define _CASE_RUNOUT(N) case N: pin = FIL_RUNOUT##N##_PIN; break; #define _CASE_RUNOUT(N) case N: pin = FIL_RUNOUT##N##_PIN; break;
LOOP_S_LE_N(i, 1, NUM_RUNOUT_SENSORS) { LOOP_S_LE_N(i, 1, NUM_RUNOUT_SENSORS) {
@ -470,7 +470,7 @@ void _O2 Endstops::report_states() {
} }
SERIAL_ECHOPGM(STR_FILAMENT_RUNOUT_SENSOR); SERIAL_ECHOPGM(STR_FILAMENT_RUNOUT_SENSOR);
if (i > 1) SERIAL_CHAR(' ', '0' + i); if (i > 1) SERIAL_CHAR(' ', '0' + i);
print_es_state(extDigitalRead(pin) != FIL_RUNOUT_INVERTING); print_es_state(extDigitalRead(pin) != FIL_RUNOUT_STATE);
} }
#undef _CASE_RUNOUT #undef _CASE_RUNOUT
#endif #endif