bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity

Serial buffer over run work around for v2.0.0 (#9236)

Browse Source 
* Work around for serial buffer over run

PronterFace sends a lot of M105 commands.  During long operations such
as UBL's G29 P1, G29 P2, G29 P4 and G26 this can over run the serial
buffer.   This results (very often) in a M1 (actually a M1M105) ending
up in the command queue.

Until we figure out a better way to resolve this issue, this will keep
the UBL commands from experiencing bogus commands at thier completion.
This commit is contained in:
Roxy-3D
2018-01-18 19:57:18 -06:00
committed by GitHub
parent 9d0cf02fef
commit bfd9728cf4
7 changed files with 55 additions and 31 deletions
Download Patch File Download Diff File Expand all files Collapse all files

6
Marlin/src/config/examples/FolgerTech/i3-2020/Configuration.h
View File

@ -555,7 +555,7 @@
* Override with M203
* X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
*/
#define DEFAULT_MAX_FEEDRATE { 250, 250, 2, 17 }
#define DEFAULT_MAX_FEEDRATE { 250, 250, 4, 17 }
/**
* Default Max Acceleration (change/s) change = mm/s
@ -587,7 +587,7 @@
*/
#define DEFAULT_XJERK 8.5
#define DEFAULT_YJERK 8.5
#define DEFAULT_ZJERK 0.3
#define DEFAULT_ZJERK 0.75
#define DEFAULT_EJERK 4.0
//===========================================================================
@ -916,7 +916,7 @@
/**
* Enable the G26 Mesh Validation Pattern tool.
*/
//#define G26_MESH_VALIDATION
#define G26_MESH_VALIDATION
#if ENABLED(G26_MESH_VALIDATION)
#define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle.
#define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool.

2
Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h
View File

@ -1562,7 +1562,7 @@
* Fully assembled MAX7219 boards can be found on the internet for under $2(US).
* For example, see https://www.ebay.com/sch/i.html?_nkw=332349290049
*/
//#define MAX7219_DEBUG
#define MAX7219_DEBUG
#if ENABLED(MAX7219_DEBUG)
//#define MAX7219_CLK_PIN 64 // on RAMPS // Configuration of the 3 pins to control the display
//#define MAX7219_DIN_PIN 57 // on RAMPS