diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h index b44e7c7a64..4579ec6671 100644 --- a/Marlin/Configuration_adv.h +++ b/Marlin/Configuration_adv.h @@ -1436,6 +1436,7 @@ //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping //#define S6_TFT_PINMAP // FYSETC S6 pin mapping + //#define F6_TFT_PINMAP // FYSETC F6 pin mapping //#define OTHER_PIN_LAYOUT // Define pins manually below #if ENABLED(OTHER_PIN_LAYOUT) diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/pin_mappings.h b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/pin_mappings.h index 208210b080..a5068fe972 100644 --- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/pin_mappings.h +++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/pin_mappings.h @@ -27,19 +27,19 @@ * without adding new pin definitions to the board. */ -#ifdef S6_TFT_PINMAP - #ifndef __MARLIN_FIRMWARE__ - #error "This pin mapping requires Marlin." - #endif +#include "../../../../inc/MarlinConfig.h" + +#if ENABLED(F6_TFT_PINMAP) // FYSETC F6 - ATmega2560 + + #define CLCD_SPI_CS 33 + #define CLCD_MOD_RESET 31 + +#elif ENABLED(S6_TFT_PINMAP) // FYSETC S6 - STM32F4 #define CLCD_SPI_CS PC7 #define CLCD_MOD_RESET PC6 -#endif -#ifdef CR10_TFT_PINMAP - #ifndef __MARLIN_FIRMWARE__ - #error "This pin mapping requires Marlin." - #endif +#elif ENABLED(CR10_TFT_PINMAP) // FYSETC S6 - STM32F4 - with TOUCH_UI_ULTIPANEL #define CLCD_USE_SOFT_SPI #define CLCD_SOFT_SPI_SCLK LCD_PINS_D4 // PORTA1 Pin 6 @@ -49,17 +49,13 @@ #define CLCD_MOD_RESET 11 // PORTD3 BTN_EN1 Pin 3 #define CLCD_AUX_0 10 // PORTD2 BTN_EN2 Pin 5 #define CLCD_AUX_1 BEEPER_PIN // PORTA4 Pin 1 -#endif -/** - * The AlephObjects pinout for re-purposing the UltraLCD - * connector EXP1 for software SPI (rev B, obsolete) - */ +#elif ENABLED(AO_EXP1_DEPRECATED_PINMAP) -#ifdef AO_EXP1_DEPRECATED_PINMAP - #ifndef __MARLIN_FIRMWARE__ - #error "This pin mapping requires Marlin." - #endif + /** + * This AlephObjects pinout re-purposes the UltraLCD + * connector EXP1 for Software SPI (rev B, obsolete) + */ #define CLCD_MOD_RESET LCD_PINS_D4 #define CLCD_SPI_CS LCD_PINS_D5 @@ -72,34 +68,30 @@ #define CLCD_SOFT_SPI_SCLK LCD_PINS_D7 #define CLCD_SOFT_SPI_MOSI LCD_PINS_D6 #define CLCD_SOFT_SPI_MISO LCD_PINS_RS -#endif -/** - * AO_EXP1_PINMAP - * - * The AlephObjects mapping for re-purposing the UltraLCD - * connector EXP1 for software SPI for display (rev C): - * - * EXP2: FTDI: SD -or- USB [1]: ULTRA_LCD: - * 1 MISO MISO MISO --> BEEPER - * 2 SCLK SCLK SCLK --> BTN_ENC - * 3 PD_N - - --> LCDE - * 4 - CS_N CS_N --> LCDRS - * 5 CS_N - - --> LCD4 - * 6 MOSI MOSI MOSI --> LCD5 - * 7 - SD_DET INT --> LCD6 - * 8 RESET - RESET --> LCD4 - * 9 GND GND GND --> GND - * 10 5V 5V 5V --> 5V - * - * [1] At the moment, Marlin does not support SD or USB - * functionality over software SPI. - */ +#elif ENABLED(AO_EXP1_PINMAP) -#ifdef AO_EXP1_PINMAP - #ifndef __MARLIN_FIRMWARE__ - #error "This pin mapping requires Marlin." - #endif + /** + * AO_EXP1_PINMAP with TOUCH_UI_ULTIPANEL + * + * This AlephObjects mapping re-purposes the UltraLCD + * connector EXP1 for Software SPI for display (rev C): + * + * EXP2: FTDI: SD -or- USB [1]: ULTRA_LCD: + * 1 MISO MISO MISO --> BEEPER + * 2 SCLK SCLK SCLK --> BTN_ENC + * 3 PD_N - - --> LCDE + * 4 - CS_N CS_N --> LCDRS + * 5 CS_N - - --> LCD4 + * 6 MOSI MOSI MOSI --> LCD5 + * 7 - SD_DET INT --> LCD6 + * 8 RESET - RESET --> LCD4 + * 9 GND GND GND --> GND + * 10 5V 5V 5V --> 5V + * + * [1] At the moment, Marlin does not support SD or USB + * functionality over software SPI. + */ #define CLCD_MOD_RESET LCD_PINS_ENABLE #define CLCD_SPI_CS LCD_PINS_D4 @@ -108,49 +100,45 @@ #define CLCD_SOFT_SPI_SCLK BTN_ENC #define CLCD_SOFT_SPI_MOSI LCD_PINS_D5 #define CLCD_SOFT_SPI_MISO BEEPER_PIN -#endif -/** - * AO_EXP2_PINMAP - * - * The AlephObjects mapping for re-purposing the UltraLCD - * connector EXP2 for hardware SPI for display and SD card - * or USB (rev C): - * - * EXP2: FTDI: SD -or- USB: ULTRA_LCD: - * 1 MISO MISO MISO --> MISO - * 2 SCLK SCLK SCLK --> SCLK - * 3 PD_N - - --> BTN_EN2 - * 4 - CS_N CS_N --> SD_CSEL - * 5 CS_N - - --> BTN_EN1 - * 6 MOSI MOSI MOSI --> MOSI - * 7 - SD_DET INT --> SD_DET - * 8 RESET - RESET --> RESET - * 9 GND GND GND --> GND - * 10 5V 5V 5V --> KILL [3] - * - * [1] This configuration allows daisy-chaining of the - * display and SD/USB on EXP2, except for [2] - * - * [2] The Ultimachine Einsy boards have a level shifter - * on MISO enabled by SD_CSEL chip select, hence it - * is not possible to run both the display and the - * SD/USB on EXP2. - * - * [3] Archim Rambo provides 5V on this pin. On any other - * board, divert this wire from the ribbon cable and - * connect it to 5V at an endstop. - */ +#elif ENABLED(AO_EXP2_PINMAP) -#ifdef AO_EXP2_PINMAP - #ifndef __MARLIN_FIRMWARE__ - #error "This pin mapping requires Marlin." - #endif + /** + * AO_EXP2_PINMAP with TOUCH_UI_ULTIPANEL + * + * The AlephObjects mapping for re-purposing the UltraLCD + * connector EXP2 for hardware SPI for display and SD card + * or USB (rev C): + * + * EXP2: FTDI: SD -or- USB: ULTRA_LCD: + * 1 MISO MISO MISO --> MISO + * 2 SCLK SCLK SCLK --> SCLK + * 3 PD_N - - --> BTN_EN2 + * 4 - CS_N CS_N --> SD_CSEL + * 5 CS_N - - --> BTN_EN1 + * 6 MOSI MOSI MOSI --> MOSI + * 7 - SD_DET INT --> SD_DET + * 8 RESET - RESET --> RESET + * 9 GND GND GND --> GND + * 10 5V 5V 5V --> KILL [3] + * + * [1] This configuration allows daisy-chaining of the + * display and SD/USB on EXP2, except for [2] + * + * [2] The Ultimachine Einsy boards have a level shifter + * on MISO enabled by SD_CSEL chip select, hence it + * is not possible to run both the display and the + * SD/USB on EXP2. + * + * [3] Archim Rambo provides 5V on this pin. On any other + * board, divert this wire from the ribbon cable and + * connect it to 5V at an endstop. + */ #define CLCD_SPI_CS BTN_EN1 #define CLCD_MOD_RESET BTN_EN2 - #if MB(EINSY_RAMBO, EINSY_RETRO) && DISABLED(SDSUPPORT) #define CLCD_SPI_EXTRA_CS SDSS #endif + #endif