bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity

Spindle/Laser power in planner blocks (#14437)

Browse Source
This commit is contained in:
Scott Lahteine
2019-10-15 16:10:20 -05:00
committed by GitHub
parent 53abfdc2c3
commit b7b303f4bf
9 changed files with 106 additions and 38 deletions
Download Patch File Download Diff File Expand all files Collapse all files

40
Marlin/src/feature/spindle_laser.cpp
View File

@ -34,14 +34,16 @@ SpindleLaser cutter;
cutter_power_t SpindleLaser::power; // = 0
#define SPINDLE_LASER_PWM_OFF ((SPINDLE_LASER_PWM_INVERT) ? 255 : 0)
void SpindleLaser::init() {
OUT_WRITE(SPINDLE_LASER_ENA_PIN, !SPINDLE_LASER_ACTIVE_HIGH); // Init spindle to off
#if ENABLED(SPINDLE_CHANGE_DIR)
OUT_WRITE(SPINDLE_DIR_PIN, SPINDLE_INVERT_DIR ? 255 : 0); // Init rotation to clockwise (M3)
#endif
#if ENABLED(SPINDLE_LASER_PWM) && PIN_EXISTS(SPINDLE_LASER_PWM)
#if ENABLED(SPINDLE_LASER_PWM)
SET_PWM(SPINDLE_LASER_PWM_PIN);
analogWrite(pin_t(SPINDLE_LASER_PWM_PIN), SPINDLE_LASER_PWM_INVERT ? 255 : 0); // set to lowest speed
analogWrite(pin_t(SPINDLE_LASER_PWM_PIN), SPINDLE_LASER_PWM_OFF); // set to lowest speed
#endif
}
@ -54,34 +56,34 @@ void SpindleLaser::init() {
*/
void SpindleLaser::set_ocr(const uint8_t ocr) {
WRITE(SPINDLE_LASER_ENA_PIN, SPINDLE_LASER_ACTIVE_HIGH); // turn spindle on (active low)
#if ENABLED(SPINDLE_LASER_PWM)
analogWrite(pin_t(SPINDLE_LASER_PWM_PIN), (SPINDLE_LASER_PWM_INVERT) ? 255 - ocr : ocr);
#endif
analogWrite(pin_t(SPINDLE_LASER_PWM_PIN), ocr ^ SPINDLE_LASER_PWM_OFF);
}
#endif
void SpindleLaser::update_output() {
const bool ena = enabled();
void SpindleLaser::apply_power(const cutter_power_t inpow) {
static cutter_power_t last_power_applied = 0;
if (inpow == last_power_applied) return;
last_power_applied = inpow;
#if ENABLED(SPINDLE_LASER_PWM)
if (ena) {
if (enabled()) {
#define _scaled(F) ((F - (SPEED_POWER_INTERCEPT)) * inv_slope)
constexpr float inv_slope = RECIPROCAL(SPEED_POWER_SLOPE),
min_ocr = (SPEED_POWER_MIN - (SPEED_POWER_INTERCEPT)) * inv_slope, // Minimum allowed
max_ocr = (SPEED_POWER_MAX - (SPEED_POWER_INTERCEPT)) * inv_slope; // Maximum allowed
min_ocr = _scaled(SPEED_POWER_MIN),
max_ocr = _scaled(SPEED_POWER_MAX);
int16_t ocr_val;
if (power <= SPEED_POWER_MIN) ocr_val = min_ocr; // Use minimum if set below
else if (power >= SPEED_POWER_MAX) ocr_val = max_ocr; // Use maximum if set above
else ocr_val = (power - (SPEED_POWER_INTERCEPT)) * inv_slope; // Use calculated OCR value
set_ocr(ocr_val & 0xFF); // ...limited to Atmel PWM max
if (inpow <= SPEED_POWER_MIN) ocr_val = min_ocr; // Use minimum if set below
else if (inpow >= SPEED_POWER_MAX) ocr_val = max_ocr; // Use maximum if set above
else ocr_val = _scaled(inpow); // Use calculated OCR value
set_ocr(ocr_val & 0xFF); // ...limited to Atmel PWM max
}
else { // Convert RPM to PWM duty cycle
WRITE(SPINDLE_LASER_ENA_PIN, !SPINDLE_LASER_ACTIVE_HIGH); // Turn spindle off (active low)
analogWrite(pin_t(SPINDLE_LASER_PWM_PIN), SPINDLE_LASER_PWM_INVERT ? 255 : 0); // Only write low byte
else {
WRITE(SPINDLE_LASER_ENA_PIN, !SPINDLE_LASER_ACTIVE_HIGH); // Turn spindle off (active low)
analogWrite(pin_t(SPINDLE_LASER_PWM_PIN), SPINDLE_LASER_PWM_OFF); // Only write low byte
}
#else
WRITE(SPINDLE_LASER_ENA_PIN, ena ? SPINDLE_LASER_ACTIVE_HIGH : !SPINDLE_LASER_ACTIVE_HIGH);
WRITE(SPINDLE_LASER_ENA_PIN, (SPINDLE_LASER_ACTIVE_HIGH) ? enabled() : !enabled());
#endif
power_delay(ena);
}
#if ENABLED(SPINDLE_CHANGE_DIR)

24
Marlin/src/feature/spindle_laser.h
View File

@ -36,10 +36,10 @@
#define MSG_CUTTER(M) _MSG_CUTTER(M)
#if SPEED_POWER_MAX > 255
#define cutter_power_t uint16_t
typedef uint16_t cutter_power_t;
#define CUTTER_MENU_TYPE uint16_5
#else
#define cutter_power_t uint8_t
typedef uint8_t cutter_power_t;
#define CUTTER_MENU_TYPE uint8
#endif
@ -51,9 +51,17 @@ public:
static inline bool enabled() { return !!power; }
static inline void set_power(const uint8_t pwr) { power = pwr; update_output(); }
static inline void set_power(const cutter_power_t pwr) { power = pwr; }
static inline void set_enabled(const bool enable) { set_power(enable ? 255 : 0); }
static inline void refresh() { apply_power(power); }
static inline void set_enabled(const bool enable) {
const bool was = enabled();
set_power(enable ? 255 : 0);
if (was != enable) power_delay();
}
static void apply_power(const cutter_power_t inpow);
//static bool active() { return READ(SPINDLE_LASER_ENA_PIN) == SPINDLE_LASER_ACTIVE_HIGH; }
@ -61,11 +69,15 @@ public:
#if ENABLED(SPINDLE_LASER_PWM)
static void set_ocr(const uint8_t ocr);
static inline void set_ocr_power(const uint8_t pwr) { power = pwr; set_ocr(pwr); }
static inline void set_ocr_power(const cutter_power_t pwr) { power = pwr; set_ocr(pwr); }
#endif
// Wait for spindle to spin up or spin down
static inline void power_delay(const bool on) { safe_delay(on ? SPINDLE_LASER_POWERUP_DELAY : SPINDLE_LASER_POWERDOWN_DELAY); }
static inline void power_delay() {
#if SPINDLE_LASER_POWERUP_DELAY || SPINDLE_LASER_POWERDOWN_DELAY
safe_delay(enabled() ? SPINDLE_LASER_POWERUP_DELAY : SPINDLE_LASER_POWERDOWN_DELAY);
#endif
}
#if ENABLED(SPINDLE_CHANGE_DIR)
static void set_direction(const bool reverse);