tested

add sort alpha section to other LPC1768 boards

Marlin/src/lcd/ultralcd.cpp

@@ -3775,7 +3775,9 @@ void kill_screen(const char* lcd_msg) {
     void lcd_sdcard_menu() {
       ENCODER_DIRECTION_MENUS();
 
-      const uint16_t fileCnt = card.getnrfilenames();
+      const uint16_t fileCnt = card.get_num_Files();  // Only access SD card if sort not active
+                                                      // This minimizes garbage on RepRap Discount Full Graphics Smart Controller
+                                                      // when using the Re-ARM card.
       START_MENU();
       MENU_BACK(MSG_MAIN);
       card.getWorkDirName();

Marlin/src/pins/pins_AZSMZ_MINI.h

@@ -24,9 +24,8 @@
  * AZSMZ MINI pin assignments
  */
 
-//#if !defined(TARGET_LPC1768)
+#ifndef TARGET_LPC1768
-#if DISABLED(IS_REARM)
+  #error "Oops!  Make sure you have LPC1768 selected."
-  #error "Oops!  Make sure you have Re-Arm selected."
 #endif
 
 #ifndef BOARD_NAME
@@ -113,6 +112,25 @@
 #define ENET_TXD0          78
 #define ENET_TXD1          79
 
+
+#if (ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) && !defined(SDCARD_SORT_ALPHA)) // needed because of shared SPI
+  #define SDCARD_SORT_ALPHA         // Using SORT feature to keep one directory level in RAM
+                                    // When going up/down directory levels the SD card is
+                                    // accessed but the garbage/lines are removed when the
+                                    // LCD updates
+
+  #define SDSORT_LIMIT       256    // Maximum number of sorted items (10-256). Costs 27 bytes each.
+  #define FOLDER_SORTING     -1     // -1=above  0=none  1=below
+  #define SDSORT_GCODE       false  // Allow turning sorting on/off with LCD and M34 g-code.
+  #define SDSORT_USES_RAM    true   // Pre-allocate a static array for faster pre-sorting.
+  #define SDSORT_USES_STACK  false  // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.)
+  #define SDSORT_CACHE_NAMES true   // Keep sorted items in RAM longer for speedy performance. Most expensive option.
+  #define SDSORT_DYNAMIC_RAM false  // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use!
+  #define SDSORT_CACHE_VFATS 2      // Maximum number of 13-byte VFAT entries to use for sorting.
+                                    // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM.
+  #define MAX_VFAT_ENTRIES SDSORT_CACHE_VFATS
+#endif
+
 /**
  *  PWMs
  *

Marlin/src/pins/pins_MKS_SBASE.h

@@ -174,6 +174,25 @@
 #define ENET_TXD0          P1_0   // J12-11
 #define ENET_TXD1          P1_1   // J12-12
 
+
+#if (ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) && !defined(SDCARD_SORT_ALPHA)) // needed because of shared SPI
+  #define SDCARD_SORT_ALPHA         // Using SORT feature to keep one directory level in RAM
+                                    // When going up/down directory levels the SD card is
+                                    // accessed but the garbage/lines are removed when the
+                                    // LCD updates
+
+  #define SDSORT_LIMIT       256    // Maximum number of sorted items (10-256). Costs 27 bytes each.
+  #define FOLDER_SORTING     -1     // -1=above  0=none  1=below
+  #define SDSORT_GCODE       false  // Allow turning sorting on/off with LCD and M34 g-code.
+  #define SDSORT_USES_RAM    true   // Pre-allocate a static array for faster pre-sorting.
+  #define SDSORT_USES_STACK  false  // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.)
+  #define SDSORT_CACHE_NAMES true   // Keep sorted items in RAM longer for speedy performance. Most expensive option.
+  #define SDSORT_DYNAMIC_RAM false  // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use!
+  #define SDSORT_CACHE_VFATS 2      // Maximum number of 13-byte VFAT entries to use for sorting.
+                                    // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM.
+  #define MAX_VFAT_ENTRIES SDSORT_CACHE_VFATS
+#endif
+
 /**
  *  PWMs
  *

Marlin/src/pins/pins_RAMPS_RE_ARM.h

@@ -259,6 +259,24 @@
     //#define SHIFT_EN            P1_22  // J5-4 & AUX-4
   #endif
 
+  #if (ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) && !defined(SDCARD_SORT_ALPHA)) // needed because of shared SPI
+    #define SDCARD_SORT_ALPHA         // Using SORT feature to keep one directory level in RAM
+                                      // When going up/down directory levels the SD card is
+                                      // accessed but the garbage/lines are removed when the
+                                      // LCD updates
+
+    #define SDSORT_LIMIT       256    // Maximum number of sorted items (10-256). Costs 27 bytes each.
+    #define FOLDER_SORTING     -1     // -1=above  0=none  1=below
+    #define SDSORT_GCODE       false  // Allow turning sorting on/off with LCD and M34 g-code.
+    #define SDSORT_USES_RAM    true   // Pre-allocate a static array for faster pre-sorting.
+    #define SDSORT_USES_STACK  false  // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.)
+    #define SDSORT_CACHE_NAMES true   // Keep sorted items in RAM longer for speedy performance. Most expensive option.
+    #define SDSORT_DYNAMIC_RAM false  // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use!
+    #define SDSORT_CACHE_VFATS 2      // Maximum number of 13-byte VFAT entries to use for sorting.
+                                      // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM.
+    #define MAX_VFAT_ENTRIES SDSORT_CACHE_VFATS
+  #endif
+
   #if ENABLED(VIKI2) || ENABLED(miniVIKI)
     // #define LCD_SCREEN_ROT_180
 

Marlin/src/sd/SdFatConfig.h

@@ -134,6 +134,9 @@
 #define FILENAME_LENGTH 13 // Number of UTF-16 characters per entry
 
 // Number of VFAT entries used. Each entry has 13 UTF-16 characters
+#ifdef MAX_VFAT_ENTRIES
+  #undef MAX_VFAT_ENTRIES
+#endif  
 #if ENABLED(SCROLL_LONG_FILENAMES)
   #define MAX_VFAT_ENTRIES (5)
 #else

Marlin/src/sd/cardreader.cpp

@@ -747,7 +747,7 @@ void CardReader::updir() {
                 strncpy(sortnames[i], LONGEST_FILENAME, SORTED_LONGNAME_MAXLEN);
                 sortnames[i][SORTED_LONGNAME_MAXLEN - 1] = '\0';
               #else
-                strcpy(sortnames[i], SORTED_LONGNAME_MAXLEN);
+                strncpy(sortnames[i], LONGEST_FILENAME, SORTED_LONGNAME_MAXLEN);
               #endif
               #if ENABLED(SDSORT_CACHE_NAMES)
                 strcpy(sortshort[i], filename);
@@ -849,7 +849,7 @@ void CardReader::updir() {
               strncpy(sortnames[0], LONGEST_FILENAME, SORTED_LONGNAME_MAXLEN);
               sortnames[0][SORTED_LONGNAME_MAXLEN - 1] = '\0';
             #else
-              strcpy(sortnames[0], SORTED_LONGNAME_MAXLEN);
+              strncpy(sortnames[0], LONGEST_FILENAME, SORTED_LONGNAME_MAXLEN);
             #endif
             #if ENABLED(SDSORT_CACHE_NAMES)
               strcpy(sortshort[0], filename);