Emergency Parser for STM32F1 (#19279)

This commit is contained in:
Victor Oliveira 2020-09-06 19:23:36 -03:00 committed by GitHub
parent 2ea1bf0e1d
commit b6ab163814
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
4 changed files with 145 additions and 15 deletions

View File

@ -46,6 +46,8 @@
#include "msc_sd.h" #include "msc_sd.h"
#endif #endif
#include "MarlinSerial.h"
// ------------------------ // ------------------------
// Defines // Defines
// ------------------------ // ------------------------
@ -64,17 +66,6 @@
#else #else
#define UsbSerial MarlinCompositeSerial #define UsbSerial MarlinCompositeSerial
#endif #endif
#define MSerial1 Serial1
#define MSerial2 Serial2
#define MSerial3 Serial3
#define MSerial4 Serial4
#define MSerial5 Serial5
#else
#define MSerial1 Serial
#define MSerial2 Serial1
#define MSerial3 Serial2
#define MSerial4 Serial3
#define MSerial5 Serial4
#endif #endif
#if SERIAL_PORT == 0 #if SERIAL_PORT == 0

View File

@ -0,0 +1,93 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#include "../../inc/MarlinConfigPre.h"
#include "MarlinSerial.h"
#include <libmaple/usart.h>
// Copied from ~/.platformio/packages/framework-arduinoststm32-maple/STM32F1/system/libmaple/usart_private.h
// Changed to handle Emergency Parser
static inline __always_inline void my_usart_irq(ring_buffer *rb, ring_buffer *wb, usart_reg_map *regs, MarlinSerial &serial) {
/* Handle RXNEIE and TXEIE interrupts.
* RXNE signifies availability of a byte in DR.
*
* See table 198 (sec 27.4, p809) in STM document RM0008 rev 15.
* We enable RXNEIE.
*/
if ((regs->CR1 & USART_CR1_RXNEIE) && (regs->SR & USART_SR_RXNE)) {
uint8_t c = (uint8)regs->DR;
#ifdef USART_SAFE_INSERT
// If the buffer is full and the user defines USART_SAFE_INSERT,
// ignore new bytes.
rb_safe_insert(rb, c);
#else
// By default, push bytes around in the ring buffer.
rb_push_insert(rb, c);
#endif
#if ENABLED(EMERGENCY_PARSER)
emergency_parser.update(serial.emergency_state, c);
#endif
}
// TXE signifies readiness to send a byte to DR.
if ((regs->CR1 & USART_CR1_TXEIE) && (regs->SR & USART_SR_TXE)) {
if (!rb_is_empty(wb))
regs->DR=rb_remove(wb);
else
regs->CR1 &= ~((uint32)USART_CR1_TXEIE); // disable TXEIE
}
}
#define DEFINE_HWSERIAL_MARLIN(name, n) \
MarlinSerial name(USART##n, \
BOARD_USART##n##_TX_PIN, \
BOARD_USART##n##_RX_PIN); \
extern "C" void __irq_usart##n(void) { \
my_usart_irq(USART##n->rb, USART##n->wb, USART##n##_BASE, MSerial##n); \
}
#define DEFINE_HWSERIAL_UART_MARLIN(name, n) \
MarlinSerial name(UART##n, \
BOARD_USART##n##_TX_PIN, \
BOARD_USART##n##_RX_PIN); \
extern "C" void __irq_usart##n(void) { \
my_usart_irq(USART##n->rb, USART##n->wb, USART##n##_BASE, MSerial##n); \
}
#if SERIAL_PORT == 1 || SERIAL_PORT_2 == 1 || DGUS_SERIAL_PORT == 1
DEFINE_HWSERIAL_MARLIN(MSerial1, 1);
#endif
#if SERIAL_PORT == 2 || SERIAL_PORT_2 == 2 || DGUS_SERIAL_PORT == 2
DEFINE_HWSERIAL_MARLIN(MSerial2, 2);
#endif
#if SERIAL_PORT == 3 || SERIAL_PORT_2 == 3 || DGUS_SERIAL_PORT == 3
DEFINE_HWSERIAL_MARLIN(MSerial3, 3);
#endif
#if SERIAL_PORT == 4 || SERIAL_PORT_2 == 4 || DGUS_SERIAL_PORT == 4
DEFINE_HWSERIAL_UART_MARLIN(MSerial4, 4);
#endif
#if SERIAL_PORT == 5 || SERIAL_PORT_2 == 5 || DGUS_SERIAL_PORT == 5
DEFINE_HWSERIAL_UART_MARLIN(MSerial5, 5);
#endif

View File

@ -0,0 +1,50 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
#include <HardwareSerial.h>
#include <WString.h>
#include "../../inc/MarlinConfigPre.h"
#if ENABLED(EMERGENCY_PARSER)
#include "../../feature/e_parser.h"
#endif
class MarlinSerial : public HardwareSerial {
public:
MarlinSerial(struct usart_dev *usart_device, uint8 tx_pin, uint8 rx_pin) :
HardwareSerial(usart_device, tx_pin, rx_pin)
#if ENABLED(EMERGENCY_PARSER)
, emergency_state(EmergencyParser::State::EP_RESET)
#endif
{ }
#if ENABLED(EMERGENCY_PARSER)
EmergencyParser::State emergency_state;
#endif
};
extern MarlinSerial MSerial1;
extern MarlinSerial MSerial2;
extern MarlinSerial MSerial3;
extern MarlinSerial MSerial4;
extern MarlinSerial MSerial5;

View File

@ -25,10 +25,6 @@
* Test STM32F1-specific configuration values for errors at compile-time. * Test STM32F1-specific configuration values for errors at compile-time.
*/ */
#if ENABLED(EMERGENCY_PARSER)
#error "EMERGENCY_PARSER is not yet implemented for STM32F1. Disable EMERGENCY_PARSER to continue."
#endif
#if ENABLED(FAST_PWM_FAN) || SPINDLE_LASER_FREQUENCY #if ENABLED(FAST_PWM_FAN) || SPINDLE_LASER_FREQUENCY
#error "Features requiring Hardware PWM (FAST_PWM_FAN, SPINDLE_LASER_FREQUENCY) are not yet supported on STM32F1." #error "Features requiring Hardware PWM (FAST_PWM_FAN, SPINDLE_LASER_FREQUENCY) are not yet supported on STM32F1."
#endif #endif