bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity

🎨 Fewer serial macros

Browse Source
This commit is contained in:
Scott Lahteine
2021-09-09 04:57:05 -05:00
committed by Scott Lahteine
parent 6d96c221bd
commit b661795ae5
159 changed files with 1002 additions and 1014 deletions
Download Patch File Download Diff File Expand all files Collapse all files

8
Marlin/src/gcode/control/M111.cpp
View File

@ -57,19 +57,19 @@ void GcodeSuite::M111() {
SERIAL_ECHOPGM(STR_DEBUG_OFF);
#if !defined(__AVR__) || !defined(USBCON)
#if ENABLED(SERIAL_STATS_RX_BUFFER_OVERRUNS)
SERIAL_ECHOPAIR("\nBuffer Overruns: ", MYSERIAL1.buffer_overruns());
SERIAL_ECHOPGM("\nBuffer Overruns: ", MYSERIAL1.buffer_overruns());
#endif
#if ENABLED(SERIAL_STATS_RX_FRAMING_ERRORS)
SERIAL_ECHOPAIR("\nFraming Errors: ", MYSERIAL1.framing_errors());
SERIAL_ECHOPGM("\nFraming Errors: ", MYSERIAL1.framing_errors());
#endif
#if ENABLED(SERIAL_STATS_DROPPED_RX)
SERIAL_ECHOPAIR("\nDropped bytes: ", MYSERIAL1.dropped());
SERIAL_ECHOPGM("\nDropped bytes: ", MYSERIAL1.dropped());
#endif
#if ENABLED(SERIAL_STATS_MAX_RX_QUEUED)
SERIAL_ECHOPAIR("\nMax RX Queue Size: ", MYSERIAL1.rxMaxEnqueued());
SERIAL_ECHOPGM("\nMax RX Queue Size: ", MYSERIAL1.rxMaxEnqueued());
#endif
#endif // !__AVR__ || !USBCON
}

2
Marlin/src/gcode/control/M211.cpp
View File

@ -41,7 +41,7 @@ void GcodeSuite::M211() {
void GcodeSuite::M211_report(const bool forReplay/*=true*/) {
report_heading_etc(forReplay, PSTR(STR_SOFT_ENDSTOPS));
SERIAL_ECHOPAIR(" M211 S", AS_DIGIT(soft_endstop._enabled), " ; ");
SERIAL_ECHOPGM(" M211 S", AS_DIGIT(soft_endstop._enabled), " ; ");
serialprintln_onoff(soft_endstop._enabled);
report_echo_start(forReplay);

30
Marlin/src/gcode/control/M605.cpp
View File

@ -127,26 +127,26 @@
case DXC_DUPLICATION_MODE: DEBUG_ECHOPGM("DUPLICATION"); break;
case DXC_MIRRORED_MODE: DEBUG_ECHOPGM("MIRRORED"); break;
}
DEBUG_ECHOPAIR("\nActive Ext: ", active_extruder);
DEBUG_ECHOPGM("\nActive Ext: ", active_extruder);
if (!active_extruder_parked) DEBUG_ECHOPGM(" NOT ");
DEBUG_ECHOPGM(" parked.");
DEBUG_ECHOPAIR("\nactive_extruder_x_pos: ", current_position.x);
DEBUG_ECHOPAIR("\ninactive_extruder_x: ", inactive_extruder_x);
DEBUG_ECHOPAIR("\nextruder_duplication_enabled: ", extruder_duplication_enabled);
DEBUG_ECHOPAIR("\nduplicate_extruder_x_offset: ", duplicate_extruder_x_offset);
DEBUG_ECHOPAIR("\nduplicate_extruder_temp_offset: ", duplicate_extruder_temp_offset);
DEBUG_ECHOPAIR("\ndelayed_move_time: ", delayed_move_time);
DEBUG_ECHOPAIR("\nX1 Home X: ", x_home_pos(0), "\nX1_MIN_POS=", X1_MIN_POS, "\nX1_MAX_POS=", X1_MAX_POS);
DEBUG_ECHOPAIR("\nX2 Home X: ", x_home_pos(1), "\nX2_MIN_POS=", X2_MIN_POS, "\nX2_MAX_POS=", X2_MAX_POS);
DEBUG_ECHOPAIR("\nX2_HOME_DIR=", X2_HOME_DIR, "\nX2_HOME_POS=", X2_HOME_POS);
DEBUG_ECHOPAIR("\nDEFAULT_DUAL_X_CARRIAGE_MODE=", STRINGIFY(DEFAULT_DUAL_X_CARRIAGE_MODE));
DEBUG_ECHOPAIR("\toolchange_settings.z_raise=", toolchange_settings.z_raise);
DEBUG_ECHOPAIR("\nDEFAULT_DUPLICATION_X_OFFSET=", DEFAULT_DUPLICATION_X_OFFSET);
DEBUG_ECHOPGM("\nactive_extruder_x_pos: ", current_position.x);
DEBUG_ECHOPGM("\ninactive_extruder_x: ", inactive_extruder_x);
DEBUG_ECHOPGM("\nextruder_duplication_enabled: ", extruder_duplication_enabled);
DEBUG_ECHOPGM("\nduplicate_extruder_x_offset: ", duplicate_extruder_x_offset);
DEBUG_ECHOPGM("\nduplicate_extruder_temp_offset: ", duplicate_extruder_temp_offset);
DEBUG_ECHOPGM("\ndelayed_move_time: ", delayed_move_time);
DEBUG_ECHOPGM("\nX1 Home X: ", x_home_pos(0), "\nX1_MIN_POS=", X1_MIN_POS, "\nX1_MAX_POS=", X1_MAX_POS);
DEBUG_ECHOPGM("\nX2 Home X: ", x_home_pos(1), "\nX2_MIN_POS=", X2_MIN_POS, "\nX2_MAX_POS=", X2_MAX_POS);
DEBUG_ECHOPGM("\nX2_HOME_DIR=", X2_HOME_DIR, "\nX2_HOME_POS=", X2_HOME_POS);
DEBUG_ECHOPGM("\nDEFAULT_DUAL_X_CARRIAGE_MODE=", STRINGIFY(DEFAULT_DUAL_X_CARRIAGE_MODE));
DEBUG_ECHOPGM("\toolchange_settings.z_raise=", toolchange_settings.z_raise);
DEBUG_ECHOPGM("\nDEFAULT_DUPLICATION_X_OFFSET=", DEFAULT_DUPLICATION_X_OFFSET);
DEBUG_EOL();
HOTEND_LOOP() {
DEBUG_ECHOPAIR_P(SP_T_STR, e);
LOOP_LINEAR_AXES(a) DEBUG_ECHOPAIR(" hotend_offset[", e, "].", AS_CHAR(AXIS_CHAR(a) | 0x20), "=", hotend_offset[e][a]);
DEBUG_ECHOPGM_P(SP_T_STR, e);
LOOP_LINEAR_AXES(a) DEBUG_ECHOPGM(" hotend_offset[", e, "].", AS_CHAR(AXIS_CHAR(a) | 0x20), "=", hotend_offset[e][a]);
DEBUG_EOL();
}
DEBUG_EOL();

4
Marlin/src/gcode/control/M993_M994.cpp
View File

@ -37,7 +37,7 @@ void GcodeSuite::M993() {
char fname[] = "spiflash.bin";
card.openFileWrite(fname);
if (!card.isFileOpen()) {
SERIAL_ECHOLNPAIR("Failed to open ", fname, " to write.");
SERIAL_ECHOLNPGM("Failed to open ", fname, " to write.");
return;
}
@ -65,7 +65,7 @@ void GcodeSuite::M994() {
char fname[] = "spiflash.bin";
card.openFileRead(fname);
if (!card.isFileOpen()) {
SERIAL_ECHOLNPAIR("Failed to open ", fname, " to read.");
SERIAL_ECHOLNPGM("Failed to open ", fname, " to read.");
return;
}

2
Marlin/src/gcode/control/T.cpp
View File

@ -49,7 +49,7 @@
void GcodeSuite::T(const int8_t tool_index) {
DEBUG_SECTION(log_T, "T", DEBUGGING(LEVELING));
if (DEBUGGING(LEVELING)) DEBUG_ECHOLNPAIR("...(", tool_index, ")");
if (DEBUGGING(LEVELING)) DEBUG_ECHOLNPGM("...(", tool_index, ")");
// Count this command as movement / activity
reset_stepper_timeout();