Comment, spacing cleanup

This commit is contained in:
Scott Lahteine 2020-11-05 17:16:27 -06:00
parent dd92c79339
commit b643a07b66
11 changed files with 21 additions and 27 deletions

View File

@ -113,7 +113,7 @@ bool PersistentStore::access_start() {
// This must be the first time since power on that we have accessed the storage, or someone
// loaded and called write_data and never called access_finish.
// Lets go looking for the slot that holds our configuration.
if (eeprom_data_written) DEBUG_ECHOLN("Dangling EEPROM write_data");
if (eeprom_data_written) DEBUG_ECHOLNPGM("Dangling EEPROM write_data");
uint32_t address = FLASH_ADDRESS_START;
while (address <= FLASH_ADDRESS_END) {
uint32_t address_value = (*(__IO uint32_t*)address);

View File

@ -34,9 +34,7 @@
#include "watchdog.h"
/**
* The watchdog clock is 40Khz. We need a 4 seconds interval, so use a /256 preescaler and
* 625 reload value (counts down to 0)
* use 1250 for 8 seconds
* The watchdog clock is 40Khz. So for a 4s or 8s interval use a /256 preescaler and 625 or 1250 reload value (counts down to 0).
*/
#define STM32F1_WD_RELOAD TERN(WATCHDOG_DURATION_8S, 1250, 625) // 4 or 8 second timeout
@ -56,7 +54,7 @@ void watchdogSetup() {
*
* @return No return
*
* @details The watchdog clock is 40Khz. We need a 4 seconds interval, so use a /256 preescaler and 625 reload value (counts down to 0)
* @details The watchdog clock is 40Khz. So for a 4s or 8s interval use a /256 preescaler and 625 or 1250 reload value (counts down to 0).
*/
void watchdog_init() {
#if DISABLED(DISABLE_WATCHDOG_INIT)

View File

@ -27,11 +27,9 @@
#include <libmaple/iwdg.h>
// Arduino STM32F1 core now has watchdog support
// Initialize watchdog with a 4 second countdown time
// Initialize watchdog with a 4 or 8 second countdown time
void watchdog_init();
// Reset watchdog. MUST be called at least every 4 seconds after the
// first watchdog_init or STM32F1 will reset.
// Reset watchdog. MUST be called every 4 or 8 seconds after the
// first watchdog_init or the STM32F1 will reset.
void HAL_watchdog_refresh();

View File

@ -675,6 +675,10 @@
#define HAS_BED_PROBE 1
#endif
#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL)
#undef PROBE_MANUALLY
#endif
#if ANY(HAS_BED_PROBE, PROBE_MANUALLY, MESH_BED_LEVELING)
#define PROBE_SELECTED 1
#endif
@ -747,6 +751,7 @@
#define HAS_PROBING_PROCEDURE 1
#endif
#if !HAS_LEVELING
#undef PROBE_MANUALLY
#undef RESTORE_LEVELING_AFTER_G28
#endif

View File

@ -1382,9 +1382,6 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
* Unified Bed Leveling
*/
// Hide PROBE_MANUALLY from the rest of the code
#undef PROBE_MANUALLY
#if IS_SCARA
#error "AUTO_BED_LEVELING_UBL does not yet support SCARA printers."
#elif DISABLED(EEPROM_SETTINGS)
@ -1410,13 +1407,7 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
#elif ENABLED(MESH_BED_LEVELING)
// Hide PROBE_MANUALLY from the rest of the code
#undef PROBE_MANUALLY
/**
* Mesh Bed Leveling
*/
// Mesh Bed Leveling
#if ENABLED(DELTA)
#error "MESH_BED_LEVELING is not compatible with DELTA printers."
#elif GRID_MAX_POINTS_X > 9 || GRID_MAX_POINTS_Y > 9

View File

@ -26,7 +26,7 @@
#if ENABLED(DGUS_LCD_UI_FYSETC)
#include "../DGUSDisplayDef.h"
#include "DGUSDisplayDef.h"
#include "../DGUSDisplay.h"
#include "../DGUSScreenHandler.h"

View File

@ -21,6 +21,8 @@
*/
#pragma once
#include "../DGUSDisplayDef.h"
enum DGUSLCD_Screens : uint8_t {
DGUSLCD_SCREEN_BOOT = 0,
DGUSLCD_SCREEN_MAIN = 1,