diff --git a/Marlin/Makefile b/Marlin/Makefile
index ec420ff66c..d765fc19da 100644
--- a/Marlin/Makefile
+++ b/Marlin/Makefile
@@ -691,8 +691,8 @@ LIBWARN = -w -Wno-packed-bitfield-compat
CSTANDARD = -std=gnu99
CXXSTANDARD = -std=gnu++11
CDEBUG = -g$(DEBUG)
-CWARN = -Wall -Wstrict-prototypes -Wno-packed-bitfield-compat -Wno-pragmas -Wunused-parameter -Wno-format
-CXXWARN = -Wall -Wno-packed-bitfield-compat -Wno-pragmas -Wunused-parameter -Wno-format
+CWARN = -Wall -Wstrict-prototypes -Wno-packed-bitfield-compat -Wno-pragmas -Wunused-parameter
+CXXWARN = -Wall -Wno-packed-bitfield-compat -Wno-pragmas -Wunused-parameter
CTUNING = -fsigned-char -funsigned-bitfields -fno-exceptions \
-fshort-enums -ffunction-sections -fdata-sections
ifneq ($(HARDWARE_MOTHERBOARD),)
diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/bio_status_screen.cpp b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/bio_status_screen.cpp
index 5b54522172..f414fef47b 100644
--- a/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/bio_status_screen.cpp
+++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/bio_status_screen.cpp
@@ -91,12 +91,12 @@ void StatusScreen::draw_temperature(draw_mode_t what) {
.cmd(COLOR_RGB(bg_text_enabled));
if (!isHeaterIdle(BED) && getTargetTemp_celsius(BED) > 0) {
- sprintf_P(bed_str, PSTR("%3d%S"), ROUND(getTargetTemp_celsius(BED)), GET_TEXT(UNITS_C));
+ format_temp(bed_str, getTargetTemp_celsius(BED));
ui.bounds(POLY(target_temp), x, y, h, v);
cmd.text(x, y, h, v, bed_str);
}
- sprintf_P(bed_str, PSTR("%3d%S"), ROUND(getActualTemp_celsius(BED)), GET_TEXT(UNITS_C));
+ format_temp(bed_str, getActualTemp_celsius(BED));
ui.bounds(POLY(actual_temp), x, y, h, v);
cmd.text(x, y, h, v, bed_str);
}
diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/change_filament_screen.cpp b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/change_filament_screen.cpp
index 04ff0cf7c3..de63824f0c 100644
--- a/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/change_filament_screen.cpp
+++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/change_filament_screen.cpp
@@ -126,14 +126,15 @@ void ChangeFilamentScreen::onRedraw(draw_mode_t what) {
}
if (what & FOREGROUND) {
+ const extruder_t e = getExtruder();
+
char e_str[15];
-
- if (isHeaterIdle(getExtruder()))
- sprintf_P(e_str, PSTR("%3d%S / %S"), ROUND(getActualTemp_celsius(getExtruder())), GET_TEXT(UNITS_C), GET_TEXT(TEMP_IDLE));
+ if (isHeaterIdle(e))
+ format_temp_and_idle(e_str, getActualTemp_celsius(e));
else
- sprintf_P(e_str, PSTR("%3d / %3d%S"), ROUND(getActualTemp_celsius(getExtruder())), ROUND(getTargetTemp_celsius(getExtruder())), GET_TEXT(UNITS_C));
+ format_temp_and_temp(e_str, getActualTemp_celsius(e), getTargetTemp_celsius(e));
- const rgb_t tcol = getWarmColor(getActualTemp_celsius(getExtruder()), COOL_TEMP, LOW_TEMP, MED_TEMP, HIGH_TEMP);
+ const rgb_t tcol = getWarmColor(getActualTemp_celsius(e), COOL_TEMP, LOW_TEMP, MED_TEMP, HIGH_TEMP);
cmd.cmd(COLOR_RGB(tcol))
.tag(15)
#ifdef TOUCH_UI_PORTRAIT
@@ -150,11 +151,11 @@ void ChangeFilamentScreen::onRedraw(draw_mode_t what) {
#endif
.colors(normal_btn);
- const bool t_ok = getActualTemp_celsius(getExtruder()) > getSoftenTemp() - 10;
+ const bool t_ok = getActualTemp_celsius(e) > getSoftenTemp() - 10;
if (screen_data.ChangeFilamentScreen.t_tag && !t_ok) {
cmd.text(BTN_POS(1,6), BTN_SIZE(1,1), GET_TEXTF(HEATING));
- } else if (getActualTemp_celsius(getExtruder()) > 100) {
+ } else if (getActualTemp_celsius(e) > 100) {
cmd.cmd(COLOR_RGB(0xFF0000))
.text(BTN_POS(1,4), BTN_SIZE(1,1), GET_TEXTF(CAUTION))
.colors(normal_btn)
@@ -198,17 +199,14 @@ void ChangeFilamentScreen::onRedraw(draw_mode_t what) {
#endif
{
char str[30];
- sprintf_P(str, PSTR("%3d%S (%S)"), LOW_TEMP, GET_TEXT(UNITS_C), GET_TEXT(MATERIAL_PLA));
+
+ format_temp_and_material(str, LOW_TEMP, GET_TEXT(MATERIAL_PLA));
cmd.tag(2) .TOG_STYLE(tog2) .button (BTN_POS(2,6), BTN_SIZE(1,1), str);
- }
- {
- char str[30];
- sprintf_P(str, PSTR("%3d%S (%S)"), MED_TEMP, GET_TEXT(UNITS_C), GET_TEXT(MATERIAL_ABS));
+
+ format_temp_and_material(str, MED_TEMP, GET_TEXT(MATERIAL_ABS));
cmd.tag(3) .TOG_STYLE(tog3) .button (BTN_POS(2,5), BTN_SIZE(1,1), str);
- }
- {
- char str[30];
- sprintf_P(str, PSTR("%3d%S (%S)"), HIGH_TEMP, GET_TEXT(UNITS_C), GET_TEXT(MATERIAL_HIGH_TEMP));
+
+ format_temp_and_material(str, HIGH_TEMP, GET_TEXT(MATERIAL_HIGH_TEMP));
cmd.tag(4) .TOG_STYLE(tog4) .button (BTN_POS(2,4), BTN_SIZE(1,1), str);
}
cmd.colors(normal_btn)
diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/nudge_nozzle_screen.cpp b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/nudge_nozzle_screen.cpp
index 2fe4eb38a4..74e7c45040 100644
--- a/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/nudge_nozzle_screen.cpp
+++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/nudge_nozzle_screen.cpp
@@ -74,11 +74,7 @@ void NudgeNozzleScreen::onRedraw(draw_mode_t what) {
#endif
#if EXTRUDERS > 1
- char num1[7], num2[7], num3[7];
- dtostrf(getNozzleOffset_mm(X, E1), 4, 2, num1);
- dtostrf(getNozzleOffset_mm(Y, E1), 4, 2, num2);
- dtostrf(getNozzleOffset_mm(Z, E1), 4, 2, num3);
- sprintf_P(str, PSTR("%s; %s; %s %S"), num1, num2, num3, GET_TEXT(UNITS_MM));
+ format_position(str, getNozzleOffset_mm(X, E1), getNozzleOffset_mm(Y, E1), getNozzleOffset_mm(Z, E1));
w.text_field (0, GET_TEXTF(TOOL_OFFSETS), str);
#endif
}
diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/screens.h b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/screens.h
index 2041036bcb..7ab8f0790e 100644
--- a/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/screens.h
+++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/screens.h
@@ -25,8 +25,7 @@
#include "../ftdi_eve_lib/ftdi_eve_lib.h"
#include "../language/languages.h"
#include "../theme/theme.h"
-
-#define ROUND(val) uint16_t((val)+0.5)
+#include "string_format.h"
extern tiny_timer_t refresh_timer;
diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/status_screen.cpp b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/status_screen.cpp
index 65190fa63d..b5a8857ee7 100644
--- a/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/status_screen.cpp
+++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/status_screen.cpp
@@ -86,29 +86,20 @@ void StatusScreen::draw_axis_position(draw_mode_t what) {
char y_str[15];
char z_str[15];
- if (isAxisPositionKnown(X)) {
- dtostrf(getAxisPosition_mm(X), 5, 1, x_str);
- strcat_P(x_str, " ");
- strcat_P(x_str, GET_TEXT(UNITS_MM));
- } else {
+ if (isAxisPositionKnown(X))
+ format_position(x_str, getAxisPosition_mm(X));
+ else
strcpy_P(x_str, PSTR("?"));
- }
- if (isAxisPositionKnown(Y)) {
- dtostrf(getAxisPosition_mm(Y), 5, 1, y_str);
- strcat_P(y_str, " ");
- strcat_P(y_str, GET_TEXT(UNITS_MM));
- } else {
+ if (isAxisPositionKnown(Y))
+ format_position(y_str, getAxisPosition_mm(Y));
+ else
strcpy_P(y_str, PSTR("?"));
- }
- if (isAxisPositionKnown(Z)) {
- dtostrf(getAxisPosition_mm(Z), 5, 1, z_str);
- strcat_P(z_str, " ");
- strcat_P(z_str, GET_TEXT(UNITS_MM));
- } else {
+ if (isAxisPositionKnown(Z))
+ format_position(z_str, getAxisPosition_mm(Z));
+ else
strcpy_P(z_str, PSTR("?"));
- }
cmd.tag(6).font(Theme::font_medium)
#ifdef TOUCH_UI_PORTRAIT
@@ -197,20 +188,21 @@ void StatusScreen::draw_temperature(draw_mode_t what) {
);
if (isHeaterIdle(BED))
- sprintf_P(bed_str, PSTR("%3d%S / %S"), ROUND(getActualTemp_celsius(BED)), GET_TEXT(UNITS_C), GET_TEXT(TEMP_IDLE));
+ format_temp_and_idle(bed_str, getActualTemp_celsius(BED));
else
- sprintf_P(bed_str, PSTR("%3d / %3d%S"), ROUND(getActualTemp_celsius(BED)), ROUND(getTargetTemp_celsius(BED)), GET_TEXT(UNITS_C));
+ format_temp_and_temp(bed_str, getActualTemp_celsius(BED), getTargetTemp_celsius(BED));
if (isHeaterIdle(H0))
- sprintf_P(e0_str, PSTR("%3d%S / %S"), ROUND(getActualTemp_celsius(H0)), GET_TEXT(UNITS_C), GET_TEXT(TEMP_IDLE));
+ format_temp_and_idle(e0_str, getActualTemp_celsius(H0));
else
- sprintf_P(e0_str, PSTR("%3d / %3d%S"), ROUND(getActualTemp_celsius(H0)), ROUND(getTargetTemp_celsius(H0)), GET_TEXT(UNITS_C));
+ format_temp_and_temp(e0_str, getActualTemp_celsius(H0), getTargetTemp_celsius(H0));
+
#if EXTRUDERS == 2
if (isHeaterIdle(H1))
- sprintf_P(e1_str, PSTR("%3d%S / %S"), ROUND(getActualTemp_celsius(H1)), PSTR(GET_TEXT(UNITS_C)), GET_TEXT(TEMP_IDLE));
+ format_temp_and_idle(e1_str, getActualTemp_celsius(H1));
else
- sprintf_P(e1_str, PSTR("%3d / %3d%S"), ROUND(getActualTemp_celsius(H1)), ROUND(getTargetTemp_celsius(H1)), GET_TEXT(UNITS_C));
+ format_temp_and_temp(e1_str, getActualTemp_celsius(H1), getTargetTemp_celsius(H1));
#else
strcpy_P(
e1_str,
diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/string_format.cpp b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/string_format.cpp
new file mode 100644
index 0000000000..17a4a73cf2
--- /dev/null
+++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/string_format.cpp
@@ -0,0 +1,89 @@
+/*********************
+ * string_format.cpp *
+ *********************/
+
+/****************************************************************************
+ * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. *
+ * *
+ * This program is free software: you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation, either version 3 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * To view a copy of the GNU General Public License, go to the following *
+ * location: . *
+ ****************************************************************************/
+
+#include "../config.h"
+
+#if ENABLED(LULZBOT_TOUCH_UI)
+
+#include "screens.h"
+
+#define ROUND(val) uint16_t((val)+0.5)
+
+#pragma GCC diagnostic push
+#pragma GCC diagnostic ignored "-Wno-format"
+
+#ifdef __AVR__
+ #define S_FMT "%S"
+#else
+ #define S_FMT "%s"
+#endif
+
+/**
+ * Formats a temperature string (e.g. "100°C")
+ */
+void format_temp(char *str, float t1) {
+ sprintf_P(str, PSTR("%3d" S_FMT), ROUND(t1), GET_TEXT(UNITS_C));
+}
+
+/**
+ * Formats a temperature string for an idle heater (e.g. "100 °C / idle")
+ */
+void format_temp_and_idle(char *str, float t1) {
+ sprintf_P(str, PSTR("%3d" S_FMT " / " S_FMT), ROUND(t1), GET_TEXT(UNITS_C), GET_TEXT(TEMP_IDLE));
+}
+
+/**
+ * Formats a temperature string for an active heater (e.g. "100 / 200°C")
+ */
+void format_temp_and_temp(char *str, float t1, float t2) {
+ sprintf_P(str, PSTR("%3d / %3d" S_FMT), ROUND(t1), ROUND(t2), GET_TEXT(UNITS_C));
+}
+
+/**
+ * Formats a temperature string for a material (e.g. "100°C (PLA)")
+ */
+void format_temp_and_material(char *str, float t1, const char *material) {
+ sprintf_P(str, PSTR("%3d" S_FMT " (" S_FMT ")"), ROUND(t1), GET_TEXT(UNITS_C), material);
+}
+
+/**
+ * Formats a position value (e.g. "10 mm")
+ */
+void format_position(char *str, float p) {
+ dtostrf(p, 5, 1, str);
+ strcat_P(str, PSTR(" "));
+ strcat_P(str, GET_TEXT(UNITS_MM));
+}
+
+/**
+ * Formats a position vector (e.g. "10; 20; 30 mm")
+ */
+void format_position(char *str, float x, float y, float z) {
+ char num1[7], num2[7], num3[7];
+ dtostrf(x, 4, 2, num1);
+ dtostrf(y, 4, 2, num2);
+ dtostrf(z, 4, 2, num3);
+ sprintf_P(str, PSTR("%s; %s; %s " S_FMT), num1, num2, num3, GET_TEXT(UNITS_MM));
+}
+
+#pragma GCC diagnostic pop
+
+#endif // LULZBOT_TOUCH_UI
diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/string_format.h b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/string_format.h
new file mode 100644
index 0000000000..d6e26fb5cb
--- /dev/null
+++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/string_format.h
@@ -0,0 +1,29 @@
+/*******************
+ * string_format.h *
+ *******************/
+
+/****************************************************************************
+ * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. *
+ * *
+ * This program is free software: you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation, either version 3 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * To view a copy of the GNU General Public License, go to the following *
+ * location: . *
+ ****************************************************************************/
+
+#pragma once
+
+void format_temp(char *str, float t1);
+void format_temp_and_idle(char *str, float t1);
+void format_temp_and_temp(char *str, float t1, float t2);
+void format_temp_and_material(char *str, float t1, const char *material);
+void format_position(char *str, float p);
+void format_position(char *str, float x, float y, float z);