diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h
index a55c878c19..14d63a6cb6 100644
--- a/Marlin/Configuration.h
+++ b/Marlin/Configuration.h
@@ -517,6 +517,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 // For G29 these apply before and after the full procedure.
 #define Z_RAISE_BEFORE_PROBING 15   // Raise before probe deploy (e.g., the first probe).
 #define Z_RAISE_AFTER_PROBING 15    // Raise before probe stow (e.g., the last probe).
+#define Z_RAISE_BETWEEN_PROBINGS 5  // Raise between probing points.
 
 //
 // For M851 give a range for adjusting the Z probe offset
@@ -670,8 +671,6 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 
   #endif // !AUTO_BED_LEVELING_GRID
 
-  #define Z_RAISE_BETWEEN_PROBINGS 5  // How much the Z axis will be raised when traveling from between next probing points.
-
   //#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" // These commands will be executed in the end of G29 routine.
                                                                              // Useful to retract a deployable Z probe.
 
diff --git a/Marlin/example_configurations/Cartesio/Configuration.h b/Marlin/example_configurations/Cartesio/Configuration.h
index 5eebcb077d..da5c9a011e 100644
--- a/Marlin/example_configurations/Cartesio/Configuration.h
+++ b/Marlin/example_configurations/Cartesio/Configuration.h
@@ -516,6 +516,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 // For G29 these apply before and after the full procedure.
 #define Z_RAISE_BEFORE_PROBING 15   // Raise before probe deploy (e.g., the first probe).
 #define Z_RAISE_AFTER_PROBING 15    // Raise before probe stow (e.g., the last probe).
+#define Z_RAISE_BETWEEN_PROBINGS 5  // Raise between probing points.
 
 //
 // For M851 give a range for adjusting the Z probe offset
@@ -669,8 +670,6 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 
   #endif // !AUTO_BED_LEVELING_GRID
 
-  #define Z_RAISE_BETWEEN_PROBINGS 5  // How much the Z axis will be raised when traveling from between next probing points.
-
   //#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" // These commands will be executed in the end of G29 routine.
                                                                              // Useful to retract a deployable Z probe.
 
diff --git a/Marlin/example_configurations/Felix/Configuration.h b/Marlin/example_configurations/Felix/Configuration.h
index fce00f7e06..eb5068c26d 100644
--- a/Marlin/example_configurations/Felix/Configuration.h
+++ b/Marlin/example_configurations/Felix/Configuration.h
@@ -499,6 +499,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 // For G29 these apply before and after the full procedure.
 #define Z_RAISE_BEFORE_PROBING 15   // Raise before probe deploy (e.g., the first probe).
 #define Z_RAISE_AFTER_PROBING 15    // Raise before probe stow (e.g., the last probe).
+#define Z_RAISE_BETWEEN_PROBINGS 5  // Raise between probing points.
 
 //
 // For M851 give a range for adjusting the Z probe offset
@@ -652,8 +653,6 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 
   #endif // !AUTO_BED_LEVELING_GRID
 
-  #define Z_RAISE_BETWEEN_PROBINGS 5  // How much the Z axis will be raised when traveling from between next probing points.
-
   //#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" // These commands will be executed in the end of G29 routine.
                                                                              // Useful to retract a deployable Z probe.
 
diff --git a/Marlin/example_configurations/Felix/DUAL/Configuration.h b/Marlin/example_configurations/Felix/DUAL/Configuration.h
index 4881d29a03..959981c9b2 100644
--- a/Marlin/example_configurations/Felix/DUAL/Configuration.h
+++ b/Marlin/example_configurations/Felix/DUAL/Configuration.h
@@ -497,6 +497,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 // For G29 these apply before and after the full procedure.
 #define Z_RAISE_BEFORE_PROBING 15   // Raise before probe deploy (e.g., the first probe).
 #define Z_RAISE_AFTER_PROBING 15    // Raise before probe stow (e.g., the last probe).
+#define Z_RAISE_BETWEEN_PROBINGS 5  // Raise between probing points.
 
 //
 // For M851 give a range for adjusting the Z probe offset
@@ -650,8 +651,6 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 
   #endif // !AUTO_BED_LEVELING_GRID
 
-  #define Z_RAISE_BETWEEN_PROBINGS 5  // How much the Z axis will be raised when traveling from between next probing points.
-
   //#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" // These commands will be executed in the end of G29 routine.
                                                                              // Useful to retract a deployable Z probe.
 
diff --git a/Marlin/example_configurations/Hephestos/Configuration.h b/Marlin/example_configurations/Hephestos/Configuration.h
index 91d879da46..4b72240dbf 100644
--- a/Marlin/example_configurations/Hephestos/Configuration.h
+++ b/Marlin/example_configurations/Hephestos/Configuration.h
@@ -509,6 +509,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
 // For G29 these apply before and after the full procedure.
 #define Z_RAISE_BEFORE_PROBING 15   // Raise before probe deploy (e.g., the first probe).
 #define Z_RAISE_AFTER_PROBING 15    // Raise before probe stow (e.g., the last probe).
+#define Z_RAISE_BETWEEN_PROBINGS 5  // Raise between probing points.
 
 //
 // For M851 give a range for adjusting the Z probe offset
@@ -662,8 +663,6 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
 
   #endif // !AUTO_BED_LEVELING_GRID
 
-  #define Z_RAISE_BETWEEN_PROBINGS 5  // How much the Z axis will be raised when traveling from between next probing points.
-
   //#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" // These commands will be executed in the end of G29 routine.
                                                                              // Useful to retract a deployable Z probe.
 
diff --git a/Marlin/example_configurations/Hephestos_2/Configuration.h b/Marlin/example_configurations/Hephestos_2/Configuration.h
index dce0c97eef..50eb96c080 100644
--- a/Marlin/example_configurations/Hephestos_2/Configuration.h
+++ b/Marlin/example_configurations/Hephestos_2/Configuration.h
@@ -511,6 +511,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 // For G29 these apply before and after the full procedure.
 #define Z_RAISE_BEFORE_PROBING 5    // Raise before probe deploy (e.g., the first probe).
 #define Z_RAISE_AFTER_PROBING 5     // Raise before probe stow (e.g., the last probe).
+#define Z_RAISE_BETWEEN_PROBINGS 2  // Raise between probing points.
 
 //
 // For M851 give a range for adjusting the Z probe offset
@@ -664,8 +665,6 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 
   #endif // !AUTO_BED_LEVELING_GRID
 
-  #define Z_RAISE_BETWEEN_PROBINGS 2  // How much the Z axis will be raised when traveling from between next probing points.
-
   //#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" // These commands will be executed in the end of G29 routine.
                                                                              // Useful to retract a deployable Z probe.
 
diff --git a/Marlin/example_configurations/K8200/Configuration.h b/Marlin/example_configurations/K8200/Configuration.h
index 0431ff3b32..aaeed3c7d6 100644
--- a/Marlin/example_configurations/K8200/Configuration.h
+++ b/Marlin/example_configurations/K8200/Configuration.h
@@ -534,6 +534,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 // For G29 these apply before and after the full procedure.
 #define Z_RAISE_BEFORE_PROBING 15   // Raise before probe deploy (e.g., the first probe).
 #define Z_RAISE_AFTER_PROBING 15    // Raise before probe stow (e.g., the last probe).
+#define Z_RAISE_BETWEEN_PROBINGS 5  // Raise between probing points.
 
 //
 // For M851 give a range for adjusting the Z probe offset
@@ -687,8 +688,6 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 
   #endif // !AUTO_BED_LEVELING_GRID
 
-  #define Z_RAISE_BETWEEN_PROBINGS 5  // How much the Z axis will be raised when traveling from between next probing points.
-
   //#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" // These commands will be executed in the end of G29 routine.
                                                                              // Useful to retract a deployable Z probe.
 
diff --git a/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h b/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h
index b84730898c..56acd002f7 100644
--- a/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h
+++ b/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h
@@ -517,6 +517,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 // For G29 these apply before and after the full procedure.
 #define Z_RAISE_BEFORE_PROBING 15   // Raise before probe deploy (e.g., the first probe).
 #define Z_RAISE_AFTER_PROBING 15    // Raise before probe stow (e.g., the last probe).
+#define Z_RAISE_BETWEEN_PROBINGS 5  // Raise between probing points.
 
 //
 // For M851 give a range for adjusting the Z probe offset
@@ -670,8 +671,6 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 
   #endif // !AUTO_BED_LEVELING_GRID
 
-  #define Z_RAISE_BETWEEN_PROBINGS 5  // How much the Z axis will be raised when traveling from between next probing points.
-
   //#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" // These commands will be executed in the end of G29 routine.
                                                                              // Useful to retract a deployable Z probe.
 
diff --git a/Marlin/example_configurations/RigidBot/Configuration.h b/Marlin/example_configurations/RigidBot/Configuration.h
index 7d84255153..6ea37ef1b1 100644
--- a/Marlin/example_configurations/RigidBot/Configuration.h
+++ b/Marlin/example_configurations/RigidBot/Configuration.h
@@ -511,6 +511,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 // For G29 these apply before and after the full procedure.
 #define Z_RAISE_BEFORE_PROBING 15   // Raise before probe deploy (e.g., the first probe).
 #define Z_RAISE_AFTER_PROBING 15    // Raise before probe stow (e.g., the last probe).
+#define Z_RAISE_BETWEEN_PROBINGS 5  // Raise between probing points.
 
 //
 // For M851 give a range for adjusting the Z probe offset
@@ -664,8 +665,6 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 
   #endif // !AUTO_BED_LEVELING_GRID
 
-  #define Z_RAISE_BETWEEN_PROBINGS 5  // How much the Z axis will be raised when traveling from between next probing points.
-
   //#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" // These commands will be executed in the end of G29 routine.
                                                                              // Useful to retract a deployable Z probe.
 
diff --git a/Marlin/example_configurations/SCARA/Configuration.h b/Marlin/example_configurations/SCARA/Configuration.h
index 7bb2c7d7b4..91ce78a332 100644
--- a/Marlin/example_configurations/SCARA/Configuration.h
+++ b/Marlin/example_configurations/SCARA/Configuration.h
@@ -525,6 +525,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 // For G29 these apply before and after the full procedure.
 #define Z_RAISE_BEFORE_PROBING 15   // Raise before probe deploy (e.g., the first probe).
 #define Z_RAISE_AFTER_PROBING 15    // Raise before probe stow (e.g., the last probe).
+#define Z_RAISE_BETWEEN_PROBINGS 5  // Raise between probing points.
 
 //
 // For M851 give a range for adjusting the Z probe offset
@@ -678,8 +679,6 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 
   #endif // !AUTO_BED_LEVELING_GRID
 
-  #define Z_RAISE_BETWEEN_PROBINGS 5  // How much the Z axis will be raised when traveling from between next probing points.
-
   //#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" // These commands will be executed in the end of G29 routine.
                                                                              // Useful to retract a deployable Z probe.
 
diff --git a/Marlin/example_configurations/TAZ4/Configuration.h b/Marlin/example_configurations/TAZ4/Configuration.h
index fbaed6a81d..50b5f4652a 100644
--- a/Marlin/example_configurations/TAZ4/Configuration.h
+++ b/Marlin/example_configurations/TAZ4/Configuration.h
@@ -538,6 +538,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 // For G29 these apply before and after the full procedure.
 #define Z_RAISE_BEFORE_PROBING 15   // Raise before probe deploy (e.g., the first probe).
 #define Z_RAISE_AFTER_PROBING 15    // Raise before probe stow (e.g., the last probe).
+#define Z_RAISE_BETWEEN_PROBINGS 5  // Raise between probing points.
 
 //
 // For M851 give a range for adjusting the Z probe offset
@@ -691,8 +692,6 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 
   #endif // !AUTO_BED_LEVELING_GRID
 
-  #define Z_RAISE_BETWEEN_PROBINGS 5  // How much the Z axis will be raised when traveling from between next probing points.
-
   //#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" // These commands will be executed in the end of G29 routine.
                                                                              // Useful to retract a deployable Z probe.
 
diff --git a/Marlin/example_configurations/WITBOX/Configuration.h b/Marlin/example_configurations/WITBOX/Configuration.h
index 1fa1f66b30..884c4bbbfb 100644
--- a/Marlin/example_configurations/WITBOX/Configuration.h
+++ b/Marlin/example_configurations/WITBOX/Configuration.h
@@ -509,6 +509,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
 // For G29 these apply before and after the full procedure.
 #define Z_RAISE_BEFORE_PROBING 15   // Raise before probe deploy (e.g., the first probe).
 #define Z_RAISE_AFTER_PROBING 15    // Raise before probe stow (e.g., the last probe).
+#define Z_RAISE_BETWEEN_PROBINGS 5  // Raise between probing points.
 
 //
 // For M851 give a range for adjusting the Z probe offset
@@ -662,8 +663,6 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
 
   #endif // !AUTO_BED_LEVELING_GRID
 
-  #define Z_RAISE_BETWEEN_PROBINGS 5  // How much the Z axis will be raised when traveling from between next probing points.
-
   //#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" // These commands will be executed in the end of G29 routine.
                                                                              // Useful to retract a deployable Z probe.
 
diff --git a/Marlin/example_configurations/adafruit/ST7565/Configuration.h b/Marlin/example_configurations/adafruit/ST7565/Configuration.h
index 1d24232325..35ca9f9ff9 100644
--- a/Marlin/example_configurations/adafruit/ST7565/Configuration.h
+++ b/Marlin/example_configurations/adafruit/ST7565/Configuration.h
@@ -517,6 +517,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 // For G29 these apply before and after the full procedure.
 #define Z_RAISE_BEFORE_PROBING 15   // Raise before probe deploy (e.g., the first probe).
 #define Z_RAISE_AFTER_PROBING 15    // Raise before probe stow (e.g., the last probe).
+#define Z_RAISE_BETWEEN_PROBINGS 5  // Raise between probing points.
 
 //
 // For M851 give a range for adjusting the Z probe offset
@@ -670,8 +671,6 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 
   #endif // !AUTO_BED_LEVELING_GRID
 
-  #define Z_RAISE_BETWEEN_PROBINGS 5  // How much the Z axis will be raised when traveling from between next probing points.
-
   //#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" // These commands will be executed in the end of G29 routine.
                                                                              // Useful to retract a deployable Z probe.
 
diff --git a/Marlin/example_configurations/delta/biv2.5/Configuration.h b/Marlin/example_configurations/delta/biv2.5/Configuration.h
index 527e917f90..074faa4ff3 100644
--- a/Marlin/example_configurations/delta/biv2.5/Configuration.h
+++ b/Marlin/example_configurations/delta/biv2.5/Configuration.h
@@ -596,6 +596,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
 // For G29 these apply before and after the full procedure.
 #define Z_RAISE_BEFORE_PROBING 15   // Raise before probe deploy (e.g., the first probe).
 #define Z_RAISE_AFTER_PROBING 50    // Raise before probe stow (e.g., the last probe).
+#define Z_RAISE_BETWEEN_PROBINGS 5  // Raise between probing points.
 
 //
 // For M851 give a range for adjusting the Z probe offset
@@ -753,8 +754,6 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
 
   #endif // !AUTO_BED_LEVELING_GRID
 
-  #define Z_RAISE_BETWEEN_PROBINGS 5  // How much the Z axis will be raised when traveling from between next probing points.
-
   //#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" // These commands will be executed in the end of G29 routine.
                                                                              // Useful to retract a deployable Z probe.
 
diff --git a/Marlin/example_configurations/delta/generic/Configuration.h b/Marlin/example_configurations/delta/generic/Configuration.h
index c870c8a10b..3f8eb0a4bb 100644
--- a/Marlin/example_configurations/delta/generic/Configuration.h
+++ b/Marlin/example_configurations/delta/generic/Configuration.h
@@ -590,6 +590,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
 // For G29 these apply before and after the full procedure.
 #define Z_RAISE_BEFORE_PROBING 15   // Raise before probe deploy (e.g., the first probe).
 #define Z_RAISE_AFTER_PROBING 50    // Raise before probe stow (e.g., the last probe).
+#define Z_RAISE_BETWEEN_PROBINGS 5  // Raise between probing points.
 
 //
 // For M851 give a range for adjusting the Z probe offset
@@ -747,8 +748,6 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
 
   #endif // !AUTO_BED_LEVELING_GRID
 
-  #define Z_RAISE_BETWEEN_PROBINGS 5  // How much the Z axis will be raised when traveling from between next probing points
-
   //#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" // These commands will be executed in the end of G29 routine.
                                                                              // Useful to retract a deployable Z probe.
 
diff --git a/Marlin/example_configurations/delta/kossel_mini/Configuration.h b/Marlin/example_configurations/delta/kossel_mini/Configuration.h
index 2052ccf672..569b1b34aa 100644
--- a/Marlin/example_configurations/delta/kossel_mini/Configuration.h
+++ b/Marlin/example_configurations/delta/kossel_mini/Configuration.h
@@ -593,6 +593,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 // For G29 these apply before and after the full procedure.
 #define Z_RAISE_BEFORE_PROBING 15   // Raise before probe deploy (e.g., the first probe).
 #define Z_RAISE_AFTER_PROBING 50    // Raise before probe stow (e.g., the last probe).
+#define Z_RAISE_BETWEEN_PROBINGS 5  // Raise between probing points.
 
 //
 // For M851 give a range for adjusting the Z probe offset
@@ -750,8 +751,6 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 
   #endif // !AUTO_BED_LEVELING_GRID
 
-  #define Z_RAISE_BETWEEN_PROBINGS 5  // How much the Z axis will be raised when traveling from between next probing points
-
   //#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" // These commands will be executed in the end of G29 routine.
                                                                              // Useful to retract a deployable Z probe.
 
diff --git a/Marlin/example_configurations/delta/kossel_pro/Configuration.h b/Marlin/example_configurations/delta/kossel_pro/Configuration.h
index 64c242bb93..3925f33345 100644
--- a/Marlin/example_configurations/delta/kossel_pro/Configuration.h
+++ b/Marlin/example_configurations/delta/kossel_pro/Configuration.h
@@ -587,6 +587,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 // For G29 these apply before and after the full procedure.
 #define Z_RAISE_BEFORE_PROBING 100  // Raise before probe deploy (e.g., the first probe).
 #define Z_RAISE_AFTER_PROBING 15    // Raise before probe stow (e.g., the last probe).
+#define Z_RAISE_BETWEEN_PROBINGS 5  // Raise between probing points.
 
 //
 // For M851 give a range for adjusting the Z probe offset
@@ -744,8 +745,6 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 
   #endif // !AUTO_BED_LEVELING_GRID
 
-  #define Z_RAISE_BETWEEN_PROBINGS 5  // How much the Z axis will be raised when traveling from between next probing points.
-
   //#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" // These commands will be executed in the end of G29 routine.
                                                                              // Useful to retract a deployable Z probe.
 
diff --git a/Marlin/example_configurations/delta/kossel_xl/Configuration.h b/Marlin/example_configurations/delta/kossel_xl/Configuration.h
index a992ffbf37..b0267349e6 100644
--- a/Marlin/example_configurations/delta/kossel_xl/Configuration.h
+++ b/Marlin/example_configurations/delta/kossel_xl/Configuration.h
@@ -588,6 +588,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 // For G29 these apply before and after the full procedure.
 #define Z_RAISE_BEFORE_PROBING 20   // Raise before probe deploy (e.g., the first probe).
 #define Z_RAISE_AFTER_PROBING 20    // Raise before probe stow (e.g., the last probe).
+#define Z_RAISE_BETWEEN_PROBINGS 10 // Raise between probing points.
 
 //
 // For M851 give a range for adjusting the Z probe offset
@@ -745,8 +746,6 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 
   #endif // !AUTO_BED_LEVELING_GRID
 
-  #define Z_RAISE_BETWEEN_PROBINGS 10 // How much the Z axis will be raised when traveling from between next probing points.
-
   //#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" // These commands will be executed in the end of G29 routine.
                                                                              // Useful to retract a deployable Z probe.
 
diff --git a/Marlin/example_configurations/makibox/Configuration.h b/Marlin/example_configurations/makibox/Configuration.h
index af2b9f9f97..8ec9481952 100644
--- a/Marlin/example_configurations/makibox/Configuration.h
+++ b/Marlin/example_configurations/makibox/Configuration.h
@@ -520,6 +520,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 // For G29 these apply before and after the full procedure.
 #define Z_RAISE_BEFORE_PROBING 15   // Raise before probe deploy (e.g., the first probe).
 #define Z_RAISE_AFTER_PROBING 15    // Raise before probe stow (e.g., the last probe).
+#define Z_RAISE_BETWEEN_PROBINGS 5  // Raise between probing points.
 
 //
 // For M851 give a range for adjusting the Z probe offset
@@ -673,8 +674,6 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 
   #endif // !AUTO_BED_LEVELING_GRID
 
-  #define Z_RAISE_BETWEEN_PROBINGS 5  // How much the Z axis will be raised when traveling from between next probing points.
-
   //#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" // These commands will be executed in the end of G29 routine.
                                                                              // Useful to retract a deployable Z probe.
 
diff --git a/Marlin/example_configurations/tvrrug/Round2/Configuration.h b/Marlin/example_configurations/tvrrug/Round2/Configuration.h
index efbc931ccc..5eb34e2b70 100644
--- a/Marlin/example_configurations/tvrrug/Round2/Configuration.h
+++ b/Marlin/example_configurations/tvrrug/Round2/Configuration.h
@@ -507,6 +507,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
 // For G29 these apply before and after the full procedure.
 #define Z_RAISE_BEFORE_PROBING 15   // Raise before probe deploy (e.g., the first probe).
 #define Z_RAISE_AFTER_PROBING 15    // Raise before probe stow (e.g., the last probe).
+#define Z_RAISE_BETWEEN_PROBINGS 5  // Raise between probing points.
 
 //
 // For M851 give a range for adjusting the Z probe offset
@@ -660,8 +661,6 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
 
   #endif // !AUTO_BED_LEVELING_GRID
 
-  #define Z_RAISE_BETWEEN_PROBINGS 5  // How much the Z axis will be raised when traveling from between next probing points.
-
   //#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" // These commands will be executed in the end of G29 routine.
                                                                              // Useful to retract a deployable Z probe.