bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity

Estimate Remaining Time (graphical display) (#15497)

Browse Source
This commit is contained in:
LinFor
2019-10-11 05:03:33 +03:00
committed by Scott Lahteine
parent 5641adb01b
commit b20d5a7cc6
118 changed files with 747 additions and 103 deletions
Download Patch File Download Diff File Expand all files Collapse all files

5
config/examples/3DFabXYZ/Migbot/Configuration_adv.h
View File

@ -888,6 +888,11 @@
// Add an 'M73' G-code to set the current percentage
//#define LCD_SET_PROGRESS_MANUALLY
#if HAS_PRINT_PROGRESS
//#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits (Graphical LCD only)
//#define SHOW_REMAINING_TIME // Display estimated time to completion (Graphical LCD only)
#endif
#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS
//#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
#if ENABLED(LCD_PROGRESS_BAR)

5
config/examples/ADIMLab/Gantry v1/Configuration_adv.h
View File

@ -888,6 +888,11 @@
// Add an 'M73' G-code to set the current percentage
//#define LCD_SET_PROGRESS_MANUALLY
#if HAS_PRINT_PROGRESS
//#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits (Graphical LCD only)
//#define SHOW_REMAINING_TIME // Display estimated time to completion (Graphical LCD only)
#endif
#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS
//#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
#if ENABLED(LCD_PROGRESS_BAR)

5
config/examples/ADIMLab/Gantry v2/Configuration_adv.h
View File

@ -888,6 +888,11 @@
// Add an 'M73' G-code to set the current percentage
//#define LCD_SET_PROGRESS_MANUALLY
#if HAS_PRINT_PROGRESS
//#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits (Graphical LCD only)
//#define SHOW_REMAINING_TIME // Display estimated time to completion (Graphical LCD only)
#endif
#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS
//#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
#if ENABLED(LCD_PROGRESS_BAR)

5
config/examples/AlephObjects/TAZ4/Configuration_adv.h
View File

@ -888,6 +888,11 @@
// Add an 'M73' G-code to set the current percentage
//#define LCD_SET_PROGRESS_MANUALLY
#if HAS_PRINT_PROGRESS
//#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits (Graphical LCD only)
//#define SHOW_REMAINING_TIME // Display estimated time to completion (Graphical LCD only)
#endif
#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS
//#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
#if ENABLED(LCD_PROGRESS_BAR)

5
config/examples/Alfawise/U20-bltouch/Configuration_adv.h
View File

@ -889,6 +889,11 @@
// Add an 'M73' G-code to set the current percentage
#define LCD_SET_PROGRESS_MANUALLY
#if HAS_PRINT_PROGRESS
//#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits (Graphical LCD only)
//#define SHOW_REMAINING_TIME // Display estimated time to completion (Graphical LCD only)
#endif
#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS
//#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
#if ENABLED(LCD_PROGRESS_BAR)

5
config/examples/Alfawise/U20/Configuration_adv.h
View File

@ -888,6 +888,11 @@
// Add an 'M73' G-code to set the current percentage
#define LCD_SET_PROGRESS_MANUALLY
#if HAS_PRINT_PROGRESS
//#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits (Graphical LCD only)
//#define SHOW_REMAINING_TIME // Display estimated time to completion (Graphical LCD only)
#endif
#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS
//#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
#if ENABLED(LCD_PROGRESS_BAR)

5
config/examples/AliExpress/UM2pExt/Configuration_adv.h
View File

@ -888,6 +888,11 @@
// Add an 'M73' G-code to set the current percentage
//#define LCD_SET_PROGRESS_MANUALLY
#if HAS_PRINT_PROGRESS
//#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits (Graphical LCD only)
//#define SHOW_REMAINING_TIME // Display estimated time to completion (Graphical LCD only)
#endif
#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS
//#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
#if ENABLED(LCD_PROGRESS_BAR)

5
config/examples/Anet/A2/Configuration_adv.h
View File

@ -888,6 +888,11 @@
// Add an 'M73' G-code to set the current percentage
//#define LCD_SET_PROGRESS_MANUALLY
#if HAS_PRINT_PROGRESS
//#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits (Graphical LCD only)
//#define SHOW_REMAINING_TIME // Display estimated time to completion (Graphical LCD only)
#endif
#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS
//#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
#if ENABLED(LCD_PROGRESS_BAR)

5
config/examples/Anet/A2plus/Configuration_adv.h
View File

@ -888,6 +888,11 @@
// Add an 'M73' G-code to set the current percentage
//#define LCD_SET_PROGRESS_MANUALLY
#if HAS_PRINT_PROGRESS
//#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits (Graphical LCD only)
//#define SHOW_REMAINING_TIME // Display estimated time to completion (Graphical LCD only)
#endif
#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS
//#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
#if ENABLED(LCD_PROGRESS_BAR)

5
config/examples/Anet/A6/Configuration_adv.h
View File

@ -888,6 +888,11 @@
// Add an 'M73' G-code to set the current percentage
//#define LCD_SET_PROGRESS_MANUALLY
#if HAS_PRINT_PROGRESS
//#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits (Graphical LCD only)
//#define SHOW_REMAINING_TIME // Display estimated time to completion (Graphical LCD only)
#endif
#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS
//#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
#if ENABLED(LCD_PROGRESS_BAR)

5
config/examples/Anet/A8/Configuration_adv.h
View File

@ -888,6 +888,11 @@
// Add an 'M73' G-code to set the current percentage
//#define LCD_SET_PROGRESS_MANUALLY
#if HAS_PRINT_PROGRESS
//#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits (Graphical LCD only)
//#define SHOW_REMAINING_TIME // Display estimated time to completion (Graphical LCD only)
#endif
#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS
//#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
#if ENABLED(LCD_PROGRESS_BAR)

5
config/examples/Anet/A8plus/Configuration_adv.h
View File

@ -888,6 +888,11 @@
// Add an 'M73' G-code to set the current percentage
//#define LCD_SET_PROGRESS_MANUALLY
#if HAS_PRINT_PROGRESS
//#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits (Graphical LCD only)
//#define SHOW_REMAINING_TIME // Display estimated time to completion (Graphical LCD only)
#endif
#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS
//#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
#if ENABLED(LCD_PROGRESS_BAR)

5
config/examples/Anet/E16/Configuration_adv.h
View File

@ -888,6 +888,11 @@
// Add an 'M73' G-code to set the current percentage
//#define LCD_SET_PROGRESS_MANUALLY
#if HAS_PRINT_PROGRESS
//#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits (Graphical LCD only)
//#define SHOW_REMAINING_TIME // Display estimated time to completion (Graphical LCD only)
#endif
#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS
//#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
#if ENABLED(LCD_PROGRESS_BAR)

5
config/examples/AnyCubic/i3/Configuration_adv.h
View File

@ -888,6 +888,11 @@
// Add an 'M73' G-code to set the current percentage
//#define LCD_SET_PROGRESS_MANUALLY
#if HAS_PRINT_PROGRESS
//#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits (Graphical LCD only)
//#define SHOW_REMAINING_TIME // Display estimated time to completion (Graphical LCD only)
#endif
#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS
//#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
#if ENABLED(LCD_PROGRESS_BAR)

5
config/examples/ArmEd/Configuration_adv.h
View File

@ -892,6 +892,11 @@
// Add an 'M73' G-code to set the current percentage
//#define LCD_SET_PROGRESS_MANUALLY
#if HAS_PRINT_PROGRESS
//#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits (Graphical LCD only)
//#define SHOW_REMAINING_TIME // Display estimated time to completion (Graphical LCD only)
#endif
#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS
//#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
#if ENABLED(LCD_PROGRESS_BAR)

5
config/examples/BIBO/TouchX/cyclops/Configuration_adv.h
View File

@ -888,6 +888,11 @@
// Add an 'M73' G-code to set the current percentage
//#define LCD_SET_PROGRESS_MANUALLY
#if HAS_PRINT_PROGRESS
//#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits (Graphical LCD only)
//#define SHOW_REMAINING_TIME // Display estimated time to completion (Graphical LCD only)
#endif
#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS
//#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
#if ENABLED(LCD_PROGRESS_BAR)

5
config/examples/BIBO/TouchX/default/Configuration_adv.h
View File

@ -888,6 +888,11 @@
// Add an 'M73' G-code to set the current percentage
//#define LCD_SET_PROGRESS_MANUALLY
#if HAS_PRINT_PROGRESS
//#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits (Graphical LCD only)
//#define SHOW_REMAINING_TIME // Display estimated time to completion (Graphical LCD only)
#endif
#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS
//#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
#if ENABLED(LCD_PROGRESS_BAR)

5
config/examples/BQ/Hephestos/Configuration_adv.h
View File

@ -888,6 +888,11 @@
// Add an 'M73' G-code to set the current percentage
//#define LCD_SET_PROGRESS_MANUALLY
#if HAS_PRINT_PROGRESS
//#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits (Graphical LCD only)
//#define SHOW_REMAINING_TIME // Display estimated time to completion (Graphical LCD only)
#endif
#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS
//#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
#if ENABLED(LCD_PROGRESS_BAR)

5
config/examples/BQ/Hephestos_2/Configuration_adv.h
View File

@ -896,6 +896,11 @@
// Add an 'M73' G-code to set the current percentage
//#define LCD_SET_PROGRESS_MANUALLY
#if HAS_PRINT_PROGRESS
//#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits (Graphical LCD only)
//#define SHOW_REMAINING_TIME // Display estimated time to completion (Graphical LCD only)
#endif
#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS
//#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
#if ENABLED(LCD_PROGRESS_BAR)

5
config/examples/BQ/WITBOX/Configuration_adv.h
View File

@ -888,6 +888,11 @@
// Add an 'M73' G-code to set the current percentage
//#define LCD_SET_PROGRESS_MANUALLY
#if HAS_PRINT_PROGRESS
//#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits (Graphical LCD only)
//#define SHOW_REMAINING_TIME // Display estimated time to completion (Graphical LCD only)
#endif
#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS
//#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
#if ENABLED(LCD_PROGRESS_BAR)

5
config/examples/Cartesio/Configuration_adv.h
View File

@ -888,6 +888,11 @@
// Add an 'M73' G-code to set the current percentage
//#define LCD_SET_PROGRESS_MANUALLY
#if HAS_PRINT_PROGRESS
//#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits (Graphical LCD only)
//#define SHOW_REMAINING_TIME // Display estimated time to completion (Graphical LCD only)
#endif
#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS
//#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
#if ENABLED(LCD_PROGRESS_BAR)

5
config/examples/Creality/CR-10/Configuration_adv.h
View File

@ -888,6 +888,11 @@
// Add an 'M73' G-code to set the current percentage
//#define LCD_SET_PROGRESS_MANUALLY
#if HAS_PRINT_PROGRESS
//#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits (Graphical LCD only)
//#define SHOW_REMAINING_TIME // Display estimated time to completion (Graphical LCD only)
#endif
#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS
//#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
#if ENABLED(LCD_PROGRESS_BAR)

5
config/examples/Creality/CR-10S/Configuration_adv.h
View File

@ -888,6 +888,11 @@
// Add an 'M73' G-code to set the current percentage
//#define LCD_SET_PROGRESS_MANUALLY
#if HAS_PRINT_PROGRESS
//#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits (Graphical LCD only)
//#define SHOW_REMAINING_TIME // Display estimated time to completion (Graphical LCD only)
#endif
#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS
//#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
#if ENABLED(LCD_PROGRESS_BAR)

5
config/examples/Creality/CR-10_5S/Configuration_adv.h
View File

@ -888,6 +888,11 @@
// Add an 'M73' G-code to set the current percentage
//#define LCD_SET_PROGRESS_MANUALLY
#if HAS_PRINT_PROGRESS
//#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits (Graphical LCD only)
//#define SHOW_REMAINING_TIME // Display estimated time to completion (Graphical LCD only)
#endif
#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS
//#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
#if ENABLED(LCD_PROGRESS_BAR)

5
config/examples/Creality/CR-10mini/Configuration_adv.h
View File

@ -888,6 +888,11 @@
// Add an 'M73' G-code to set the current percentage
//#define LCD_SET_PROGRESS_MANUALLY
#if HAS_PRINT_PROGRESS
//#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits (Graphical LCD only)
//#define SHOW_REMAINING_TIME // Display estimated time to completion (Graphical LCD only)
#endif
#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS
//#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
#if ENABLED(LCD_PROGRESS_BAR)

5
config/examples/Creality/CR-20 Pro/Configuration_adv.h
View File

@ -888,6 +888,11 @@
// Add an 'M73' G-code to set the current percentage
//#define LCD_SET_PROGRESS_MANUALLY
#if HAS_PRINT_PROGRESS
//#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits (Graphical LCD only)
//#define SHOW_REMAINING_TIME // Display estimated time to completion (Graphical LCD only)
#endif
#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS
//#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
#if ENABLED(LCD_PROGRESS_BAR)

5
config/examples/Creality/CR-20/Configuration_adv.h
View File

@ -888,6 +888,11 @@
// Add an 'M73' G-code to set the current percentage
//#define LCD_SET_PROGRESS_MANUALLY
#if HAS_PRINT_PROGRESS
//#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits (Graphical LCD only)
//#define SHOW_REMAINING_TIME // Display estimated time to completion (Graphical LCD only)
#endif
#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS
//#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
#if ENABLED(LCD_PROGRESS_BAR)

5
config/examples/Creality/CR-8/Configuration_adv.h
View File

@ -888,6 +888,11 @@
// Add an 'M73' G-code to set the current percentage
//#define LCD_SET_PROGRESS_MANUALLY
#if HAS_PRINT_PROGRESS
//#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits (Graphical LCD only)
//#define SHOW_REMAINING_TIME // Display estimated time to completion (Graphical LCD only)
#endif
#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS
//#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
#if ENABLED(LCD_PROGRESS_BAR)

5
config/examples/Creality/Ender-2/Configuration_adv.h
View File

@ -888,6 +888,11 @@
// Add an 'M73' G-code to set the current percentage
//#define LCD_SET_PROGRESS_MANUALLY
#if HAS_PRINT_PROGRESS
//#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits (Graphical LCD only)
//#define SHOW_REMAINING_TIME // Display estimated time to completion (Graphical LCD only)
#endif
#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS
//#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
#if ENABLED(LCD_PROGRESS_BAR)

5
config/examples/Creality/Ender-3/Configuration_adv.h
View File

@ -888,6 +888,11 @@
// Add an 'M73' G-code to set the current percentage
//#define LCD_SET_PROGRESS_MANUALLY
#if HAS_PRINT_PROGRESS
//#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits (Graphical LCD only)
//#define SHOW_REMAINING_TIME // Display estimated time to completion (Graphical LCD only)
#endif
#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS
//#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
#if ENABLED(LCD_PROGRESS_BAR)

5
config/examples/Creality/Ender-4/Configuration_adv.h
View File

@ -888,6 +888,11 @@
// Add an 'M73' G-code to set the current percentage
//#define LCD_SET_PROGRESS_MANUALLY
#if HAS_PRINT_PROGRESS
//#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits (Graphical LCD only)
//#define SHOW_REMAINING_TIME // Display estimated time to completion (Graphical LCD only)
#endif
#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS
//#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
#if ENABLED(LCD_PROGRESS_BAR)

5
config/examples/Creality/Ender-5/Configuration_adv.h
View File

@ -888,6 +888,11 @@
// Add an 'M73' G-code to set the current percentage
//#define LCD_SET_PROGRESS_MANUALLY
#if HAS_PRINT_PROGRESS
//#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits (Graphical LCD only)
//#define SHOW_REMAINING_TIME // Display estimated time to completion (Graphical LCD only)
#endif
#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS
//#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
#if ENABLED(LCD_PROGRESS_BAR)

5
config/examples/Dagoma/Disco Ultimate/Configuration_adv.h
View File

@ -888,6 +888,11 @@
// Add an 'M73' G-code to set the current percentage
#define LCD_SET_PROGRESS_MANUALLY
#if HAS_PRINT_PROGRESS
//#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits (Graphical LCD only)
//#define SHOW_REMAINING_TIME // Display estimated time to completion (Graphical LCD only)
#endif
#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS
//#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
#if ENABLED(LCD_PROGRESS_BAR)

5
config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration_adv.h
View File

@ -888,6 +888,11 @@
// Add an 'M73' G-code to set the current percentage
//#define LCD_SET_PROGRESS_MANUALLY
#if HAS_PRINT_PROGRESS
//#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits (Graphical LCD only)
//#define SHOW_REMAINING_TIME // Display estimated time to completion (Graphical LCD only)
#endif
#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS
//#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
#if ENABLED(LCD_PROGRESS_BAR)

5
config/examples/Einstart-S/Configuration_adv.h
View File

@ -888,6 +888,11 @@
// Add an 'M73' G-code to set the current percentage
//#define LCD_SET_PROGRESS_MANUALLY
#if HAS_PRINT_PROGRESS
//#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits (Graphical LCD only)
//#define SHOW_REMAINING_TIME // Display estimated time to completion (Graphical LCD only)
#endif
#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS
//#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
#if ENABLED(LCD_PROGRESS_BAR)

5
config/examples/FYSETC/AIO_II/Configuration_adv.h
View File

@ -888,6 +888,11 @@
// Add an 'M73' G-code to set the current percentage
//#define LCD_SET_PROGRESS_MANUALLY
#if HAS_PRINT_PROGRESS
//#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits (Graphical LCD only)
//#define SHOW_REMAINING_TIME // Display estimated time to completion (Graphical LCD only)
#endif
#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS
//#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
#if ENABLED(LCD_PROGRESS_BAR)

5
config/examples/FYSETC/Cheetah 1.2/BLTouch/Configuration_adv.h
View File

@ -888,6 +888,11 @@
// Add an 'M73' G-code to set the current percentage
//#define LCD_SET_PROGRESS_MANUALLY
#if HAS_PRINT_PROGRESS
//#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits (Graphical LCD only)
//#define SHOW_REMAINING_TIME // Display estimated time to completion (Graphical LCD only)
#endif
#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS
//#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
#if ENABLED(LCD_PROGRESS_BAR)

5
config/examples/FYSETC/Cheetah 1.2/base/Configuration_adv.h
View File

@ -888,6 +888,11 @@
// Add an 'M73' G-code to set the current percentage
//#define LCD_SET_PROGRESS_MANUALLY
#if HAS_PRINT_PROGRESS
//#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits (Graphical LCD only)
//#define SHOW_REMAINING_TIME // Display estimated time to completion (Graphical LCD only)
#endif
#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS
//#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
#if ENABLED(LCD_PROGRESS_BAR)

5
config/examples/FYSETC/Cheetah/BLTouch/Configuration_adv.h
View File

@ -888,6 +888,11 @@
// Add an 'M73' G-code to set the current percentage
//#define LCD_SET_PROGRESS_MANUALLY
#if HAS_PRINT_PROGRESS
//#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits (Graphical LCD only)
//#define SHOW_REMAINING_TIME // Display estimated time to completion (Graphical LCD only)
#endif
#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS
//#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
#if ENABLED(LCD_PROGRESS_BAR)

5
config/examples/FYSETC/Cheetah/base/Configuration_adv.h
View File

@ -888,6 +888,11 @@
// Add an 'M73' G-code to set the current percentage
//#define LCD_SET_PROGRESS_MANUALLY
#if HAS_PRINT_PROGRESS
//#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits (Graphical LCD only)
//#define SHOW_REMAINING_TIME // Display estimated time to completion (Graphical LCD only)
#endif
#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS
//#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
#if ENABLED(LCD_PROGRESS_BAR)

5
config/examples/FYSETC/F6_13/Configuration_adv.h
View File

@ -888,6 +888,11 @@
// Add an 'M73' G-code to set the current percentage
//#define LCD_SET_PROGRESS_MANUALLY
#if HAS_PRINT_PROGRESS
//#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits (Graphical LCD only)
//#define SHOW_REMAINING_TIME // Display estimated time to completion (Graphical LCD only)
#endif
#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS
//#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
#if ENABLED(LCD_PROGRESS_BAR)

5
config/examples/Felix/DUAL/Configuration_adv.h
View File

@ -888,6 +888,11 @@
// Add an 'M73' G-code to set the current percentage
//#define LCD_SET_PROGRESS_MANUALLY
#if HAS_PRINT_PROGRESS
//#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits (Graphical LCD only)
//#define SHOW_REMAINING_TIME // Display estimated time to completion (Graphical LCD only)
#endif
#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS
//#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
#if ENABLED(LCD_PROGRESS_BAR)

5
config/examples/Felix/Single/Configuration_adv.h
View File

@ -888,6 +888,11 @@
// Add an 'M73' G-code to set the current percentage
//#define LCD_SET_PROGRESS_MANUALLY
#if HAS_PRINT_PROGRESS
//#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits (Graphical LCD only)
//#define SHOW_REMAINING_TIME // Display estimated time to completion (Graphical LCD only)
#endif
#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS
//#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
#if ENABLED(LCD_PROGRESS_BAR)

5
config/examples/FlashForge/CreatorPro/Configuration_adv.h
View File

@ -887,6 +887,11 @@
// Add an 'M73' G-code to set the current percentage
//#define LCD_SET_PROGRESS_MANUALLY
#if HAS_PRINT_PROGRESS
//#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits (Graphical LCD only)
//#define SHOW_REMAINING_TIME // Display estimated time to completion (Graphical LCD only)
#endif
#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS
//#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
#if ENABLED(LCD_PROGRESS_BAR)

5
config/examples/FolgerTech/i3-2020/Configuration_adv.h
View File

@ -888,6 +888,11 @@
// Add an 'M73' G-code to set the current percentage
//#define LCD_SET_PROGRESS_MANUALLY
#if HAS_PRINT_PROGRESS
//#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits (Graphical LCD only)
//#define SHOW_REMAINING_TIME // Display estimated time to completion (Graphical LCD only)
#endif
#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS
#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
#if ENABLED(LCD_PROGRESS_BAR)

5
config/examples/Formbot/Raptor/Configuration_adv.h
View File

@ -888,6 +888,11 @@
// Add an 'M73' G-code to set the current percentage
#define LCD_SET_PROGRESS_MANUALLY
#if HAS_PRINT_PROGRESS
//#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits (Graphical LCD only)
//#define SHOW_REMAINING_TIME // Display estimated time to completion (Graphical LCD only)
#endif
#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS
//#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
#if ENABLED(LCD_PROGRESS_BAR)

5
config/examples/Formbot/T_Rex_3/Configuration_adv.h
View File

@ -892,6 +892,11 @@
// Add an 'M73' G-code to set the current percentage
#define LCD_SET_PROGRESS_MANUALLY
#if HAS_PRINT_PROGRESS
//#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits (Graphical LCD only)
//#define SHOW_REMAINING_TIME // Display estimated time to completion (Graphical LCD only)
#endif
#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS
//#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
#if ENABLED(LCD_PROGRESS_BAR)

5
config/examples/Geeetech/A10/Configuration_adv.h
View File

@ -888,6 +888,11 @@
// Add an 'M73' G-code to set the current percentage
//#define LCD_SET_PROGRESS_MANUALLY
#if HAS_PRINT_PROGRESS
//#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits (Graphical LCD only)
//#define SHOW_REMAINING_TIME // Display estimated time to completion (Graphical LCD only)
#endif
#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS
//#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
#if ENABLED(LCD_PROGRESS_BAR)

5
config/examples/Geeetech/A10M/Configuration_adv.h
View File

@ -888,6 +888,11 @@
// Add an 'M73' G-code to set the current percentage
//#define LCD_SET_PROGRESS_MANUALLY
#if HAS_PRINT_PROGRESS
//#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits (Graphical LCD only)
//#define SHOW_REMAINING_TIME // Display estimated time to completion (Graphical LCD only)
#endif
#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS
#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
#if ENABLED(LCD_PROGRESS_BAR)

5
config/examples/Geeetech/A20M/Configuration_adv.h
View File

@ -888,6 +888,11 @@
// Add an 'M73' G-code to set the current percentage
//#define LCD_SET_PROGRESS_MANUALLY
#if HAS_PRINT_PROGRESS
//#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits (Graphical LCD only)
//#define SHOW_REMAINING_TIME // Display estimated time to completion (Graphical LCD only)
#endif
#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS
#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
#if ENABLED(LCD_PROGRESS_BAR)

5
config/examples/Geeetech/MeCreator2/Configuration_adv.h
View File

@ -888,6 +888,11 @@
// Add an 'M73' G-code to set the current percentage
//#define LCD_SET_PROGRESS_MANUALLY
#if HAS_PRINT_PROGRESS
//#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits (Graphical LCD only)
//#define SHOW_REMAINING_TIME // Display estimated time to completion (Graphical LCD only)
#endif
#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS
//#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
#if ENABLED(LCD_PROGRESS_BAR)

5
config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h
View File

@ -888,6 +888,11 @@
// Add an 'M73' G-code to set the current percentage
//#define LCD_SET_PROGRESS_MANUALLY
#if HAS_PRINT_PROGRESS
//#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits (Graphical LCD only)
//#define SHOW_REMAINING_TIME // Display estimated time to completion (Graphical LCD only)
#endif
#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS
//#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
#if ENABLED(LCD_PROGRESS_BAR)

5
config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h
View File

@ -888,6 +888,11 @@
// Add an 'M73' G-code to set the current percentage
//#define LCD_SET_PROGRESS_MANUALLY
#if HAS_PRINT_PROGRESS
//#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits (Graphical LCD only)
//#define SHOW_REMAINING_TIME // Display estimated time to completion (Graphical LCD only)
#endif
#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS
//#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
#if ENABLED(LCD_PROGRESS_BAR)

5
config/examples/HMS434/Configuration_adv.h
View File

@ -856,6 +856,11 @@
// Add an 'M73' G-code to set the current percentage
//#define LCD_SET_PROGRESS_MANUALLY
#if HAS_PRINT_PROGRESS
//#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits (Graphical LCD only)
//#define SHOW_REMAINING_TIME // Display estimated time to completion (Graphical LCD only)
#endif
#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS
//#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
#if ENABLED(LCD_PROGRESS_BAR)

5
config/examples/Infitary/i3-M508/Configuration_adv.h
View File

@ -888,6 +888,11 @@
// Add an 'M73' G-code to set the current percentage
//#define LCD_SET_PROGRESS_MANUALLY
#if HAS_PRINT_PROGRESS
//#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits (Graphical LCD only)
//#define SHOW_REMAINING_TIME // Display estimated time to completion (Graphical LCD only)
#endif
#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS
//#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
#if ENABLED(LCD_PROGRESS_BAR)

5
config/examples/JGAurora/A1/Configuration_adv.h
View File

@ -893,6 +893,11 @@
// Add an 'M73' G-code to set the current percentage
//#define LCD_SET_PROGRESS_MANUALLY
#if HAS_PRINT_PROGRESS
//#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits (Graphical LCD only)
//#define SHOW_REMAINING_TIME // Display estimated time to completion (Graphical LCD only)
#endif
#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS
//#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
#if ENABLED(LCD_PROGRESS_BAR)

5
config/examples/JGAurora/A5/Configuration_adv.h
View File

@ -888,6 +888,11 @@
// Add an 'M73' G-code to set the current percentage
//#define LCD_SET_PROGRESS_MANUALLY
#if HAS_PRINT_PROGRESS
//#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits (Graphical LCD only)
//#define SHOW_REMAINING_TIME // Display estimated time to completion (Graphical LCD only)
#endif
#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS
//#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
#if ENABLED(LCD_PROGRESS_BAR)

5
config/examples/JGAurora/A5S/Configuration_adv.h
View File

@ -893,6 +893,11 @@
// Add an 'M73' G-code to set the current percentage
//#define LCD_SET_PROGRESS_MANUALLY
#if HAS_PRINT_PROGRESS
//#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits (Graphical LCD only)
//#define SHOW_REMAINING_TIME // Display estimated time to completion (Graphical LCD only)
#endif
#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS
//#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
#if ENABLED(LCD_PROGRESS_BAR)

5
config/examples/MakerParts/Configuration_adv.h
View File

@ -888,6 +888,11 @@
// Add an 'M73' G-code to set the current percentage
//#define LCD_SET_PROGRESS_MANUALLY
#if HAS_PRINT_PROGRESS
//#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits (Graphical LCD only)
//#define SHOW_REMAINING_TIME // Display estimated time to completion (Graphical LCD only)
#endif
#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS
//#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
#if ENABLED(LCD_PROGRESS_BAR)

5
config/examples/Malyan/M150/Configuration_adv.h
View File

@ -888,6 +888,11 @@
// Add an 'M73' G-code to set the current percentage
//#define LCD_SET_PROGRESS_MANUALLY
#if HAS_PRINT_PROGRESS
//#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits (Graphical LCD only)
//#define SHOW_REMAINING_TIME // Display estimated time to completion (Graphical LCD only)
#endif
#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS
//#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
#if ENABLED(LCD_PROGRESS_BAR)

5
config/examples/Malyan/M200/Configuration_adv.h
View File

@ -890,6 +890,11 @@
// Add an 'M73' G-code to set the current percentage
//#define LCD_SET_PROGRESS_MANUALLY
#if HAS_PRINT_PROGRESS
//#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits (Graphical LCD only)
//#define SHOW_REMAINING_TIME // Display estimated time to completion (Graphical LCD only)
#endif
#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS
//#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
#if ENABLED(LCD_PROGRESS_BAR)

5
config/examples/Micromake/C1/enhanced/Configuration_adv.h
View File

@ -888,6 +888,11 @@
// Add an 'M73' G-code to set the current percentage
//#define LCD_SET_PROGRESS_MANUALLY
#if HAS_PRINT_PROGRESS
//#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits (Graphical LCD only)
//#define SHOW_REMAINING_TIME // Display estimated time to completion (Graphical LCD only)
#endif
#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS
//#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
#if ENABLED(LCD_PROGRESS_BAR)

5
config/examples/Mks/Robin/Configuration_adv.h
View File

@ -888,6 +888,11 @@
// Add an 'M73' G-code to set the current percentage
//#define LCD_SET_PROGRESS_MANUALLY
#if HAS_PRINT_PROGRESS
//#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits (Graphical LCD only)
//#define SHOW_REMAINING_TIME // Display estimated time to completion (Graphical LCD only)
#endif
#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS
//#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
#if ENABLED(LCD_PROGRESS_BAR)

5
config/examples/Mks/Sbase/Configuration_adv.h
View File

@ -889,6 +889,11 @@
// Add an 'M73' G-code to set the current percentage
//#define LCD_SET_PROGRESS_MANUALLY
#if HAS_PRINT_PROGRESS
//#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits (Graphical LCD only)
//#define SHOW_REMAINING_TIME // Display estimated time to completion (Graphical LCD only)
#endif
#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS
//#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
#if ENABLED(LCD_PROGRESS_BAR)

5
config/examples/RapideLite/RL200/Configuration_adv.h
View File

@ -888,6 +888,11 @@
// Add an 'M73' G-code to set the current percentage
//#define LCD_SET_PROGRESS_MANUALLY
#if HAS_PRINT_PROGRESS
//#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits (Graphical LCD only)
//#define SHOW_REMAINING_TIME // Display estimated time to completion (Graphical LCD only)
#endif
#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS
//#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
#if ENABLED(LCD_PROGRESS_BAR)

5
config/examples/RigidBot/Configuration_adv.h
View File

@ -888,6 +888,11 @@
// Add an 'M73' G-code to set the current percentage
//#define LCD_SET_PROGRESS_MANUALLY
#if HAS_PRINT_PROGRESS
//#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits (Graphical LCD only)
//#define SHOW_REMAINING_TIME // Display estimated time to completion (Graphical LCD only)
#endif
#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS
//#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
#if ENABLED(LCD_PROGRESS_BAR)

5
config/examples/SCARA/Configuration_adv.h
View File

@ -888,6 +888,11 @@
// Add an 'M73' G-code to set the current percentage
//#define LCD_SET_PROGRESS_MANUALLY
#if HAS_PRINT_PROGRESS
//#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits (Graphical LCD only)
//#define SHOW_REMAINING_TIME // Display estimated time to completion (Graphical LCD only)
#endif
#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS
//#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
#if ENABLED(LCD_PROGRESS_BAR)

5
config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h
View File

@ -888,6 +888,11 @@
// Add an 'M73' G-code to set the current percentage
//#define LCD_SET_PROGRESS_MANUALLY
#if HAS_PRINT_PROGRESS
//#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits (Graphical LCD only)
//#define SHOW_REMAINING_TIME // Display estimated time to completion (Graphical LCD only)
#endif
#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS
//#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
#if ENABLED(LCD_PROGRESS_BAR)

5
config/examples/Sanguinololu/Configuration_adv.h
View File

@ -888,6 +888,11 @@
// Add an 'M73' G-code to set the current percentage
//#define LCD_SET_PROGRESS_MANUALLY
#if HAS_PRINT_PROGRESS
//#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits (Graphical LCD only)
//#define SHOW_REMAINING_TIME // Display estimated time to completion (Graphical LCD only)
#endif
#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS
//#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
#if ENABLED(LCD_PROGRESS_BAR)

5
config/examples/Tevo/Michelangelo/Configuration_adv.h
View File

@ -888,6 +888,11 @@
// Add an 'M73' G-code to set the current percentage
#define LCD_SET_PROGRESS_MANUALLY
#if HAS_PRINT_PROGRESS
//#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits (Graphical LCD only)
//#define SHOW_REMAINING_TIME // Display estimated time to completion (Graphical LCD only)
#endif
#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS
//#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
#if ENABLED(LCD_PROGRESS_BAR)

5
config/examples/Tevo/Tarantula Pro/Configuration_adv.h
View File

@ -884,6 +884,11 @@
// Add an 'M73' G-code to set the current percentage
#define LCD_SET_PROGRESS_MANUALLY
#if HAS_PRINT_PROGRESS
//#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits (Graphical LCD only)
//#define SHOW_REMAINING_TIME // Display estimated time to completion (Graphical LCD only)
#endif
#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS
//#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
#if ENABLED(LCD_PROGRESS_BAR)

5
config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h
View File

@ -888,6 +888,11 @@
// Add an 'M73' G-code to set the current percentage
#define LCD_SET_PROGRESS_MANUALLY
#if HAS_PRINT_PROGRESS
//#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits (Graphical LCD only)
//#define SHOW_REMAINING_TIME // Display estimated time to completion (Graphical LCD only)
#endif
#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS
//#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
#if ENABLED(LCD_PROGRESS_BAR)

5
config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h
View File

@ -888,6 +888,11 @@
// Add an 'M73' G-code to set the current percentage
#define LCD_SET_PROGRESS_MANUALLY
#if HAS_PRINT_PROGRESS
//#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits (Graphical LCD only)
//#define SHOW_REMAINING_TIME // Display estimated time to completion (Graphical LCD only)
#endif
#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS
//#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
#if ENABLED(LCD_PROGRESS_BAR)

5
config/examples/TheBorg/Configuration_adv.h
View File

@ -888,6 +888,11 @@
// Add an 'M73' G-code to set the current percentage
//#define LCD_SET_PROGRESS_MANUALLY
#if HAS_PRINT_PROGRESS
//#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits (Graphical LCD only)
//#define SHOW_REMAINING_TIME // Display estimated time to completion (Graphical LCD only)
#endif
#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS
//#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
#if ENABLED(LCD_PROGRESS_BAR)

5
config/examples/TinyBoy2/Configuration_adv.h
View File

@ -888,6 +888,11 @@
// Add an 'M73' G-code to set the current percentage
//#define LCD_SET_PROGRESS_MANUALLY
#if HAS_PRINT_PROGRESS
//#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits (Graphical LCD only)
//#define SHOW_REMAINING_TIME // Display estimated time to completion (Graphical LCD only)
#endif
#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS
//#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
#if ENABLED(LCD_PROGRESS_BAR)

5
config/examples/Tronxy/X3A/Configuration_adv.h
View File

@ -888,6 +888,11 @@
// Add an 'M73' G-code to set the current percentage
//#define LCD_SET_PROGRESS_MANUALLY
#if HAS_PRINT_PROGRESS
//#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits (Graphical LCD only)
//#define SHOW_REMAINING_TIME // Display estimated time to completion (Graphical LCD only)
#endif
#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS
//#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
#if ENABLED(LCD_PROGRESS_BAR)

5
config/examples/Tronxy/X5S-2E/Configuration_adv.h
View File

@ -888,6 +888,11 @@
// Add an 'M73' G-code to set the current percentage
//#define LCD_SET_PROGRESS_MANUALLY
#if HAS_PRINT_PROGRESS
//#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits (Graphical LCD only)
//#define SHOW_REMAINING_TIME // Display estimated time to completion (Graphical LCD only)
#endif
#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS
//#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
#if ENABLED(LCD_PROGRESS_BAR)

5
config/examples/UltiMachine/Archim1/Configuration_adv.h
View File

@ -888,6 +888,11 @@
// Add an 'M73' G-code to set the current percentage
//#define LCD_SET_PROGRESS_MANUALLY
#if HAS_PRINT_PROGRESS
//#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits (Graphical LCD only)
//#define SHOW_REMAINING_TIME // Display estimated time to completion (Graphical LCD only)
#endif
#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS
//#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
#if ENABLED(LCD_PROGRESS_BAR)

5
config/examples/UltiMachine/Archim2/Configuration_adv.h
View File

@ -888,6 +888,11 @@
// Add an 'M73' G-code to set the current percentage
//#define LCD_SET_PROGRESS_MANUALLY
#if HAS_PRINT_PROGRESS
//#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits (Graphical LCD only)
//#define SHOW_REMAINING_TIME // Display estimated time to completion (Graphical LCD only)
#endif
#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS
//#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
#if ENABLED(LCD_PROGRESS_BAR)

5
config/examples/VORONDesign/Configuration_adv.h
View File

@ -888,6 +888,11 @@
// Add an 'M73' G-code to set the current percentage
//#define LCD_SET_PROGRESS_MANUALLY
#if HAS_PRINT_PROGRESS
//#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits (Graphical LCD only)
//#define SHOW_REMAINING_TIME // Display estimated time to completion (Graphical LCD only)
#endif
#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS
//#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
#if ENABLED(LCD_PROGRESS_BAR)

5
config/examples/Velleman/K8200/Configuration_adv.h
View File

@ -901,6 +901,11 @@
// Add an 'M73' G-code to set the current percentage
//#define LCD_SET_PROGRESS_MANUALLY
#if HAS_PRINT_PROGRESS
//#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits (Graphical LCD only)
//#define SHOW_REMAINING_TIME // Display estimated time to completion (Graphical LCD only)
#endif
#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS
#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
#if ENABLED(LCD_PROGRESS_BAR)

5
config/examples/Velleman/K8400/Dual-head/Configuration_adv.h
View File

@ -888,6 +888,11 @@
// Add an 'M73' G-code to set the current percentage
//#define LCD_SET_PROGRESS_MANUALLY
#if HAS_PRINT_PROGRESS
//#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits (Graphical LCD only)
//#define SHOW_REMAINING_TIME // Display estimated time to completion (Graphical LCD only)
#endif
#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS
//#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
#if ENABLED(LCD_PROGRESS_BAR)

5
config/examples/Velleman/K8400/Single-head/Configuration_adv.h
View File

@ -888,6 +888,11 @@
// Add an 'M73' G-code to set the current percentage
//#define LCD_SET_PROGRESS_MANUALLY
#if HAS_PRINT_PROGRESS
//#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits (Graphical LCD only)
//#define SHOW_REMAINING_TIME // Display estimated time to completion (Graphical LCD only)
#endif
#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS
//#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
#if ENABLED(LCD_PROGRESS_BAR)

5
config/examples/WASP/PowerWASP/Configuration_adv.h
View File

@ -888,6 +888,11 @@
// Add an 'M73' G-code to set the current percentage
//#define LCD_SET_PROGRESS_MANUALLY
#if HAS_PRINT_PROGRESS
//#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits (Graphical LCD only)
//#define SHOW_REMAINING_TIME // Display estimated time to completion (Graphical LCD only)
#endif
#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS
//#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
#if ENABLED(LCD_PROGRESS_BAR)

5
config/examples/Wanhao/Duplicator 6/Configuration_adv.h
View File

@ -890,6 +890,11 @@
// Add an 'M73' G-code to set the current percentage
//#define LCD_SET_PROGRESS_MANUALLY
#if HAS_PRINT_PROGRESS
//#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits (Graphical LCD only)
//#define SHOW_REMAINING_TIME // Display estimated time to completion (Graphical LCD only)
#endif
#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS
//#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
#if ENABLED(LCD_PROGRESS_BAR)

5
config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h
View File

@ -888,6 +888,11 @@
// Add an 'M73' G-code to set the current percentage
#define LCD_SET_PROGRESS_MANUALLY
#if HAS_PRINT_PROGRESS
//#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits (Graphical LCD only)
//#define SHOW_REMAINING_TIME // Display estimated time to completion (Graphical LCD only)
#endif
#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS
//#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
#if ENABLED(LCD_PROGRESS_BAR)

5
config/examples/delta/Anycubic/Kossel/Configuration_adv.h
View File

@ -890,6 +890,11 @@
// Add an 'M73' G-code to set the current percentage
//#define LCD_SET_PROGRESS_MANUALLY
#if HAS_PRINT_PROGRESS
//#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits (Graphical LCD only)
//#define SHOW_REMAINING_TIME // Display estimated time to completion (Graphical LCD only)
#endif
#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS
//#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
#if ENABLED(LCD_PROGRESS_BAR)

5
config/examples/delta/Dreammaker/Overlord/Configuration_adv.h
View File

@ -890,6 +890,11 @@
// Add an 'M73' G-code to set the current percentage
#define LCD_SET_PROGRESS_MANUALLY
#if HAS_PRINT_PROGRESS
//#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits (Graphical LCD only)
//#define SHOW_REMAINING_TIME // Display estimated time to completion (Graphical LCD only)
#endif
#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS
#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
#if ENABLED(LCD_PROGRESS_BAR)

5
config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h
View File

@ -890,6 +890,11 @@
// Add an 'M73' G-code to set the current percentage
#define LCD_SET_PROGRESS_MANUALLY
#if HAS_PRINT_PROGRESS
//#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits (Graphical LCD only)
//#define SHOW_REMAINING_TIME // Display estimated time to completion (Graphical LCD only)
#endif
#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS
#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
#if ENABLED(LCD_PROGRESS_BAR)

5
config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h
View File

@ -890,6 +890,11 @@
// Add an 'M73' G-code to set the current percentage
//#define LCD_SET_PROGRESS_MANUALLY
#if HAS_PRINT_PROGRESS
//#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits (Graphical LCD only)
//#define SHOW_REMAINING_TIME // Display estimated time to completion (Graphical LCD only)
#endif
#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS
//#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
#if ENABLED(LCD_PROGRESS_BAR)

5
config/examples/delta/FLSUN/kossel/Configuration_adv.h
View File

@ -890,6 +890,11 @@
// Add an 'M73' G-code to set the current percentage
//#define LCD_SET_PROGRESS_MANUALLY
#if HAS_PRINT_PROGRESS
//#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits (Graphical LCD only)
//#define SHOW_REMAINING_TIME // Display estimated time to completion (Graphical LCD only)
#endif
#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS
//#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
#if ENABLED(LCD_PROGRESS_BAR)

5
config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h
View File

@ -890,6 +890,11 @@
// Add an 'M73' G-code to set the current percentage
//#define LCD_SET_PROGRESS_MANUALLY
#if HAS_PRINT_PROGRESS
//#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits (Graphical LCD only)
//#define SHOW_REMAINING_TIME // Display estimated time to completion (Graphical LCD only)
#endif
#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS
//#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
#if ENABLED(LCD_PROGRESS_BAR)

5
config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h
View File

@ -890,6 +890,11 @@
// Add an 'M73' G-code to set the current percentage
//#define LCD_SET_PROGRESS_MANUALLY
#if HAS_PRINT_PROGRESS
//#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits (Graphical LCD only)
//#define SHOW_REMAINING_TIME // Display estimated time to completion (Graphical LCD only)
#endif
#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS
//#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
#if ENABLED(LCD_PROGRESS_BAR)

5
config/examples/delta/MKS/SBASE/Configuration_adv.h
View File

@ -890,6 +890,11 @@
// Add an 'M73' G-code to set the current percentage
//#define LCD_SET_PROGRESS_MANUALLY
#if HAS_PRINT_PROGRESS
//#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits (Graphical LCD only)
//#define SHOW_REMAINING_TIME // Display estimated time to completion (Graphical LCD only)
#endif
#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS
//#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
#if ENABLED(LCD_PROGRESS_BAR)

5
config/examples/delta/Tevo Little Monster/Configuration_adv.h
View File

@ -890,6 +890,11 @@
// Add an 'M73' G-code to set the current percentage
//#define LCD_SET_PROGRESS_MANUALLY
#if HAS_PRINT_PROGRESS
//#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits (Graphical LCD only)
//#define SHOW_REMAINING_TIME // Display estimated time to completion (Graphical LCD only)
#endif
#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS
//#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
#if ENABLED(LCD_PROGRESS_BAR)

5
config/examples/delta/generic/Configuration_adv.h
View File

@ -890,6 +890,11 @@
// Add an 'M73' G-code to set the current percentage
//#define LCD_SET_PROGRESS_MANUALLY
#if HAS_PRINT_PROGRESS
//#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits (Graphical LCD only)
//#define SHOW_REMAINING_TIME // Display estimated time to completion (Graphical LCD only)
#endif
#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS
//#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
#if ENABLED(LCD_PROGRESS_BAR)

5
config/examples/delta/kossel_mini/Configuration_adv.h
View File

@ -890,6 +890,11 @@
// Add an 'M73' G-code to set the current percentage
//#define LCD_SET_PROGRESS_MANUALLY
#if HAS_PRINT_PROGRESS
//#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits (Graphical LCD only)
//#define SHOW_REMAINING_TIME // Display estimated time to completion (Graphical LCD only)
#endif
#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS
//#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
#if ENABLED(LCD_PROGRESS_BAR)

5
config/examples/delta/kossel_xl/Configuration_adv.h
View File

@ -890,6 +890,11 @@
// Add an 'M73' G-code to set the current percentage
//#define LCD_SET_PROGRESS_MANUALLY
#if HAS_PRINT_PROGRESS
//#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits (Graphical LCD only)
//#define SHOW_REMAINING_TIME // Display estimated time to completion (Graphical LCD only)
#endif
#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS
//#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
#if ENABLED(LCD_PROGRESS_BAR)

5
config/examples/gCreate/gMax1.5+/Configuration_adv.h
View File

@ -888,6 +888,11 @@
// Add an 'M73' G-code to set the current percentage
//#define LCD_SET_PROGRESS_MANUALLY
#if HAS_PRINT_PROGRESS
//#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits (Graphical LCD only)
//#define SHOW_REMAINING_TIME // Display estimated time to completion (Graphical LCD only)
#endif
#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS
//#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
#if ENABLED(LCD_PROGRESS_BAR)

5
config/examples/makibox/Configuration_adv.h
View File

@ -888,6 +888,11 @@
// Add an 'M73' G-code to set the current percentage
//#define LCD_SET_PROGRESS_MANUALLY
#if HAS_PRINT_PROGRESS
//#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits (Graphical LCD only)
//#define SHOW_REMAINING_TIME // Display estimated time to completion (Graphical LCD only)
#endif
#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS
//#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
#if ENABLED(LCD_PROGRESS_BAR)

Some files were not shown because too many files have changed in this diff Show More