BigTreeTech SKR Mini v1.1 (#14041)

This commit is contained in:
yangwenxiong
2019-06-11 10:10:51 +08:00
committed by Scott Lahteine
parent f30b89953d
commit b0a4ea79b8
6 changed files with 185 additions and 0 deletions

View File

@ -414,6 +414,8 @@
#include "pins_STM32F1R.h" // STM32F1 env:STM32F1
#elif MB(STM3R_MINI)
#include "pins_STM3R_MINI.h" // STM32F1 env:STM32F1
#elif MB(BIGTREE_SKR_MINI_V1_1)
#include "pins_BIGTREE_SKR_MINI_V1_1.h" // STM32F1 env:BIGTREE_SKR_MINI
#elif MB(MALYAN_M200)
#include "pins_MALYAN_M200.h" // STM32F1 env:malyanm200
#elif MB(CHITU3D)

View File

@ -0,0 +1,134 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#ifndef TARGET_STM32F1
#error "Oops! Select an STM32F1 board in 'Tools > Board.'"
#endif
#ifndef BOARD_NAME
#define BOARD_NAME "BIGTREE SKR mini V1.1"
#endif
// Ignore temp readings during develpment.
//#define BOGUS_TEMPERATURE_FAILSAFE_OVERRIDE
//
// Limit Switches
//
#define X_MIN_PIN PC2
#define X_MAX_PIN PA2
#define Y_MIN_PIN PC1
#define Y_MAX_PIN PA1
#define Z_MIN_PIN PC0
#define Z_MAX_PIN PC3
//
// Steppers
//
/**
* TODO: Currently using same Enable pin for all steppers.
*/
#define X_STEP_PIN PC6
#define X_DIR_PIN PC7
#define X_ENABLE_PIN PB15
#define Y_STEP_PIN PB13
#define Y_DIR_PIN PB14
#define Y_ENABLE_PIN PB12
#define Z_STEP_PIN PB10
#define Z_DIR_PIN PB11
#define Z_ENABLE_PIN PB2
#define E0_STEP_PIN PC5
#define E0_DIR_PIN PB0
#define E0_ENABLE_PIN PC4
#if ENABLED(TMC_USE_SW_SPI)
#define TMC_SW_SCK PB3
#define TMC_SW_MISO PB4
#define TMC_SW_MOSI PB5
#endif
//
// Heaters / Fans
//
#define HEATER_0_PIN PA8
#define FAN_PIN PC8
#define HEATER_BED_PIN PC9
//
// Temperature Sensors
//
#define TEMP_BED_PIN PB1 // Analog Input
#define TEMP_0_PIN PA0 // Analog Input
//
// LCD Pins
//
/**
* _____ _____
* NC | · · | GND 5V | · · | GND
* RESET | · · | 1.31(SD_DETECT) (LCD_D7) 1.23 | · · | 1.22 (LCD_D6)
* (MOSI)0.18 | · · | 3.25(BTN_EN2) (LCD_D5) 1.21 | · · | 1.20 (LCD_D4)
* (SD_SS)0.16 | · · | 3.26(BTN_EN1) (LCD_RS) 1.19 | · · | 1.18 (LCD_EN)
* (SCK)0.15 | · · | 0.17(MISO) (BTN_ENC) 0.28 | · · | 1.30 (BEEPER)
*  ̄ ̄  ̄ ̄
* EXP2 EXP1
*/
#if ENABLED(ULTRA_LCD)
#define BEEPER_PIN PC10
#define BTN_ENC PC11
#define LCD_PINS_RS PC12
#define BTN_EN1 PD2
#define BTN_EN2 PB8
#define LCD_PINS_ENABLE PB6
#define LCD_PINS_D4 PC13
#if ENABLED(ULTIPANEL)
#define LCD_PINS_D5 PB7
#define LCD_PINS_D6 PC15
#define LCD_PINS_D7 PC14
#endif
#endif // ULTRA_LCD
//
// SD Card
//
// Marlin uses the SD drive attached to the LCD
//#define STM32_SD_LCD
#ifdef STM32_SD_LCD
#define SD_DETECT_PIN PB9
#define ENABLE_SPI3
#else
#define SD_DETECT_PIN PA3
#endif