bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity

Style, spacing, typo cleanup for recent changes

Browse Source
This commit is contained in:
Scott Lahteine 2020-12-08 20:17:55 -06:00 committed by Scott Lahteine
parent 91e9599554
commit ad7fe15154
13 changed files with 133 additions and 137 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
Marlin/src/HAL/STM32/inc/SanityCheck.h
View File

@ -53,5 +53,5 @@
#endif
#if ANY(TFT_COLOR_UI, TFT_LVGL_UI, TFT_CLASSIC_UI) && NOT_TARGET(STM32F4xx, STM32F1xx)
#error "TFT_COLOR_UI, TFT_LVGL_UI and TFT_CLASSIC_U are currently only supported on STM32F4 and STM32F1 hardware."
#error "TFT_COLOR_UI, TFT_LVGL_UI and TFT_CLASSIC_UI are currently only supported on STM32F4 and STM32F1 hardware."
#endif

3
Marlin/src/HAL/STM32/pinsDebug.h
View File

@ -141,8 +141,7 @@ uint8_t get_pin_mode(const pin_t Ard_num) {
uint32_t ll_pin = STM_LL_GPIO_PIN(dp);
GPIO_TypeDef *port = get_GPIO_Port(STM_PORT(dp));
uint32_t mode = LL_GPIO_GetPinMode(port, ll_pin);
switch (mode)
{
switch (mode) {
case LL_GPIO_MODE_ANALOG: return MODE_PIN_ANALOG;
case LL_GPIO_MODE_INPUT: return MODE_PIN_INPUT;
case LL_GPIO_MODE_OUTPUT: return MODE_PIN_OUTPUT;

29
Marlin/src/HAL/STM32/tft/tft_spi.cpp
View File

@ -40,8 +40,7 @@ void TFT_SPI::Init() {
if ((spiInstance = (SPI_TypeDef *)pinmap_peripheral(digitalPinToPinName(TFT_SCK_PIN), PinMap_SPI_SCLK)) == NP) return;
if (spiInstance != (SPI_TypeDef *)pinmap_peripheral(digitalPinToPinName(TFT_MOSI_PIN), PinMap_SPI_MOSI)) return;
#if PIN_EXISTS(TFT_MISO)
if (TFT_MISO_PIN != TFT_MOSI_PIN)
#if PIN_EXISTS(TFT_MISO) && TFT_MISO_PIN != TFT_MOSI_PIN
if (spiInstance != (SPI_TypeDef *)pinmap_peripheral(digitalPinToPinName(TFT_MISO_PIN), PinMap_SPI_MISO)) return;
#endif
@ -49,10 +48,7 @@ void TFT_SPI::Init() {
SPIx.State = HAL_SPI_STATE_RESET;
SPIx.Init.NSS = SPI_NSS_SOFT;
SPIx.Init.Mode = SPI_MODE_MASTER;
if (TFT_MISO_PIN == TFT_MOSI_PIN)
SPIx.Init.Direction = SPI_DIRECTION_1LINE;
else
SPIx.Init.Direction = SPI_DIRECTION_2LINES;
SPIx.Init.Direction = (TFT_MISO_PIN == TFT_MOSI_PIN) ? SPI_DIRECTION_1LINE : SPI_DIRECTION_2LINES;
SPIx.Init.BaudRatePrescaler = SPI_BAUDRATEPRESCALER_2;
SPIx.Init.CLKPhase = SPI_PHASE_1EDGE;
SPIx.Init.CLKPolarity = SPI_POLARITY_LOW;
@ -64,8 +60,7 @@ void TFT_SPI::Init() {
pinmap_pinout(digitalPinToPinName(TFT_SCK_PIN), PinMap_SPI_SCLK);
pinmap_pinout(digitalPinToPinName(TFT_MOSI_PIN), PinMap_SPI_MOSI);
#if PIN_EXISTS(TFT_MISO)
if (TFT_MISO_PIN != TFT_MOSI_PIN)
#if PIN_EXISTS(TFT_MISO) && TFT_MISO_PIN != TFT_MOSI_PIN
pinmap_pinout(digitalPinToPinName(TFT_MISO_PIN), PinMap_SPI_MISO);
#endif
pin_PullConfig(get_GPIO_Port(STM_PORT(digitalPinToPinName(TFT_SCK_PIN))), STM_LL_GPIO_PIN(digitalPinToPinName(TFT_SCK_PIN)), GPIO_PULLDOWN);
@ -119,7 +114,7 @@ void TFT_SPI::Init() {
DMAtx.Init.MemDataAlignment = DMA_MDATAALIGN_HALFWORD;
DMAtx.Init.Mode = DMA_NORMAL;
DMAtx.Init.Priority = DMA_PRIORITY_LOW;
#if defined(STM32F4xx)
#ifdef STM32F4xx
DMAtx.Init.FIFOMode = DMA_FIFOMODE_DISABLE;
#endif
}
@ -140,11 +135,10 @@ uint32_t TFT_SPI::GetID() {
}
uint32_t TFT_SPI::ReadID(uint16_t Reg) {
#if !PIN_EXISTS(TFT_MISO)
return 0;
#else
uint32_t Data = 0;
#if PIN_EXISTS(TFT_MISO)
uint32_t BaudRatePrescaler = SPIx.Init.BaudRatePrescaler;
uint32_t i, Data = 0;
uint32_t i;
SPIx.Init.BaudRatePrescaler = SPIx.Instance == SPI1 ? SPI_BAUDRATEPRESCALER_8 : SPI_BAUDRATEPRESCALER_4;
DataTransferBegin(DATASIZE_8BIT);
@ -154,12 +148,12 @@ uint32_t TFT_SPI::ReadID(uint16_t Reg) {
__HAL_SPI_ENABLE(&SPIx);
for (i = 0; i < 4; i++) {
if (TFT_MISO_PIN != TFT_MOSI_PIN) {
#if TFT_MISO_PIN != TFT_MOSI_PIN
//if (hspi->Init.Direction == SPI_DIRECTION_2LINES) {
while ((SPIx.Instance->SR & SPI_FLAG_TXE) != SPI_FLAG_TXE) {}
SPIx.Instance->DR = 0;
//}
}
#endif
while ((SPIx.Instance->SR & SPI_FLAG_RXNE) != SPI_FLAG_RXNE) {}
Data = (Data << 8) | SPIx.Instance->DR;
}
@ -168,9 +162,9 @@ uint32_t TFT_SPI::ReadID(uint16_t Reg) {
DataTransferEnd();
SPIx.Init.BaudRatePrescaler = BaudRatePrescaler;
#endif
return Data >> 7;
#endif
}
bool TFT_SPI::isBusy() {
@ -183,9 +177,8 @@ bool TFT_SPI::isBusy() {
if (__HAL_DMA_GET_FLAG(&DMAtx, __HAL_DMA_GET_TC_FLAG_INDEX(&DMAtx)) != 0 || __HAL_DMA_GET_FLAG(&DMAtx, __HAL_DMA_GET_TE_FLAG_INDEX(&DMAtx)) != 0)
Abort();
}
else {
else
Abort();
}
return dmaEnabled;
}

4
Marlin/src/pins/esp32/pins_MRR_ESPE.h
View File

@ -1,9 +1,9 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by

10
Marlin/src/pins/lpc1768/pins_BTT_SKR_common.h
View File

@ -33,8 +33,8 @@
// https://github.com/bigtreetech/BTT-Expansion-module/tree/master/BTT%20EXP-MOT
//#define HAS_BTT_EXP_MOT 1
#if BOTH(HAS_WIRED_LCD,HAS_BTT_EXP_MOT)
#if EITHER(CR10_STOCKDISPLAY,ENDER2_STOCKDISPLAY)
#if BOTH(HAS_WIRED_LCD, HAS_BTT_EXP_MOT)
#if EITHER(CR10_STOCKDISPLAY, ENDER2_STOCKDISPLAY)
#define EXP_MOT_USE_EXP2_ONLY
#else
#error "Having a LCD that uses both EXP1/EXP2 and a expanion motor module on EXP1/EXP2 is not possible."
@ -129,7 +129,8 @@
#endif
#if HAS_BTT_EXP_MOT
/* _____ _____
/** _____ _____
* NC | · · | GND NC | · · | GND
* NC | · · | 1.31 (M1EN) (M2EN) 1.23 | · · | 1.22 (M3EN)
* (M1STP) 0.18 | · · 3.25 (M1DIR) (M1RX) 1.21 | · · 1.20 (M1DIAG)
@ -153,6 +154,7 @@
#define E2_SERIAL_RX_PIN EXPA1_05_PIN
#endif
#endif
// M2 on Driver Expansion Module
#define E3_STEP_PIN EXPA2_08_PIN
#define E3_DIR_PIN EXPA2_07_PIN
@ -167,6 +169,7 @@
#else
#define E3_ENABLE_PIN EXPA2_04_PIN
#endif
// M3 on Driver Expansion Module
#define E4_STEP_PIN EXPA2_10_PIN
#define E4_DIR_PIN EXPA2_09_PIN
@ -181,4 +184,5 @@
#else
#define E4_ENABLE_PIN EXPA2_04_PIN
#endif
#endif // HAS_BTT_EXP_MOT

4
Marlin/src/pins/ramps/pins_K8600.h
View File

@ -1,9 +1,9 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by

4
Marlin/src/pins/sanguino/pins_ZMIB_V2.h
View File

@ -1,9 +1,9 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by

4
Marlin/src/pins/stm32f1/pins_CREALITY_V4.h
View File

@ -1,9 +1,9 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by

4
Marlin/src/pins/stm32f1/pins_CREALITY_V427.h
View File

@ -1,9 +1,9 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by

6
Marlin/src/pins/stm32f1/pins_CREALITY_V452.h
View File

@ -1,9 +1,9 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@ -16,7 +16,7 @@
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/

2
Marlin/src/pins/stm32f4/pins_MKS_ROBIN_PRO_V2.h
View File

@ -16,7 +16,7 @@
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once