No bed config for RAMPS

The motherboard 35 is a config without bed with this pins setting :
D8 Extruder
D9 Fan
D10 Controller Fan
This commit is contained in:
Nicolas Rossi 2013-03-05 15:51:24 +01:00
parent 6504e96165
commit aba67e2449
2 changed files with 20 additions and 8 deletions

View File

@ -28,6 +28,7 @@
// 3 = MEGA/RAMPS up to 1.2 = 3
// 33 = RAMPS 1.3 (Power outputs: Extruder, Bed, Fan)
// 34 = RAMPS 1.3 (Power outputs: Extruder0, Extruder1, Bed)
// 35 = RAMPS 1.3 (Power outputs: Extruder, Fan, Fan)
// 4 = Duemilanove w/ ATMega328P pin assignment
// 5 = Gen6
// 51 = Gen6 deluxe

View File

@ -305,7 +305,7 @@
* Arduino Mega pin assignment
*
****************************************************************************************/
#if MOTHERBOARD == 3 || MOTHERBOARD == 33 || MOTHERBOARD == 34
#if MOTHERBOARD == 3 || MOTHERBOARD == 33 || MOTHERBOARD == 34 || MOTHERBOARD == 35
#define KNOWN_BOARD 1
//////////////////FIX THIS//////////////
@ -319,7 +319,7 @@
// #define RAMPS_V_1_3
// #define RAMPS_V_1_0
#if MOTHERBOARD == 33 || MOTHERBOARD == 34
#if MOTHERBOARD == 33 || MOTHERBOARD == 34 || MOTHERBOARD == 35
#define X_STEP_PIN 54
#define X_DIR_PIN 55
@ -355,11 +355,14 @@
#define SDSS 53
#define LED_PIN 13
#if MOTHERBOARD == 33
#if MOTHERBOARD == 33 || MOTHERBOARD == 35
#define FAN_PIN 9 // (Sprinter config)
#else
#define FAN_PIN 4 // IO pin. Buffer needed
#endif
#if MOTHERBOARD == 35
#define CONTROLLERFAN_PIN 10 //Pin used for the fan to cool controller
#endif
#define PS_ON_PIN 12
#if defined(REPRAP_DISCOUNT_SMART_CONTROLLER) || defined(G3D_PANEL)
@ -368,7 +371,11 @@
#define KILL_PIN -1
#endif
#if MOTHERBOARD == 35
#define HEATER_0_PIN 8
#else
#define HEATER_0_PIN 10 // EXTRUDER 1
#endif
#if MOTHERBOARD == 33
#define HEATER_1_PIN -1
#else
@ -378,7 +385,11 @@
#define TEMP_0_PIN 13 // ANALOG NUMBERING
#define TEMP_1_PIN 15 // ANALOG NUMBERING
#define TEMP_2_PIN -1 // ANALOG NUMBERING
#if MOTHERBOARD == 35
#define HEATER_BED_PIN -1
#else
#define HEATER_BED_PIN 8 // BED
#endif
#define TEMP_BED_PIN 14 // ANALOG NUMBERING
#ifdef ULTRA_LCD
@ -509,7 +520,7 @@
#define TEMP_1_PIN -1
#define TEMP_2_PIN -1
#define TEMP_BED_PIN 1 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!!
#endif// MOTHERBOARD == 33 || MOTHERBOARD == 34
#endif// MOTHERBOARD == 33 || MOTHERBOARD == 34 || MOTHERBOARD == 35
// SPI for Max6675 Thermocouple
@ -523,7 +534,7 @@
#define MAX6675_SS 49
#endif
#endif//MOTHERBOARD == 3 || MOTHERBOARD == 33 || MOTHERBOARD == 34
#endif//MOTHERBOARD == 3 || MOTHERBOARD == 33 || MOTHERBOARD == 34 || MOTHERBOARD == 35
/****************************************************************************************
* Duemilanove w/ ATMega328P pin assignment