💡 Adjust headers, formatting

2021-09-16 04:36:26 -05:00
parent e7a25a45e6
commit ab9609146f
145 changed files with 269 additions and 36 deletions
--- a/Marlin/src/pins/pinsDebug.h
+++ b/Marlin/src/pins/pinsDebug.h
@@ -2,6 +2,9 @@
 * Marlin 3D Printer Firmware
 * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
@@ -41,7 +44,7 @@
 #define REPORT_NAME_ANALOG(COUNTER, NAME) _ADD_PIN(#NAME, COUNTER)

 #include "pinsDebug_list.h"
-#line 45
+#line 48

 // manually add pins that have names that are macros which don't play well with these macros
 #if ANY(AVR_ATmega2560_FAMILY, AVR_ATmega1284_FAMILY, ARDUINO_ARCH_SAM, TARGET_LPC1768)
@@ -160,7 +163,7 @@ const PinInfo pin_array[] PROGMEM = {
  #endif

  #include "pinsDebug_list.h"
-  #line 164
+  #line 167

 };

--- a/Marlin/src/pins/pinsDebug_list.h
+++ b/Marlin/src/pins/pinsDebug_list.h
@@ -2,6 +2,9 @@
 * Marlin 3D Printer Firmware
 * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
@@ -22,15 +25,13 @@
 // Following this pattern is a must.
 // If the new pin name is over 28 characters long then pinsDebug.h will need to be modified.

-// Pin lists 1.1.x and 2.0.x synchronized 2018-02-17
-
 #if TARGET_LPC1768
  #define ANALOG_OK(PN) ((PN) == P0_02 || (PN) == P0_03 || (PN) == P0_23 || (PN) == P0_24 || (PN) == P0_25 || (PN) == P0_26 || (PN) == P1_30 || (PN) == P1_31)
 #else
  #define ANALOG_OK(PN) ((PN) >= 0 && (PN) < NUM_ANALOG_INPUTS)
 #endif

-#line 34 // set __LINE__ to a known value for both passes
+#line 35 // set __LINE__ to a known value for both passes

 //
 // Analog Pin Assignments
--- a/Marlin/src/pins/sanguino/pins_MELZI_V2.h
+++ b/Marlin/src/pins/sanguino/pins_MELZI_V2.h
@@ -2,6 +2,9 @@
 * Marlin 3D Printer Firmware
 * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
--- a/Marlin/src/pins/stm32f0/pins_MALYAN_M200_V2.h
+++ b/Marlin/src/pins/stm32f0/pins_MALYAN_M200_V2.h
@@ -19,7 +19,6 @@
 * along with this program.  If not, see <https://www.gnu.org/licenses/>.
 *
 */
-
 #pragma once

 #if NOT_TARGET(STM32F0xx)
--- a/Marlin/src/pins/stm32f0/pins_MALYAN_M300.h
+++ b/Marlin/src/pins/stm32f0/pins_MALYAN_M300.h
@@ -19,7 +19,6 @@
 * along with this program.  If not, see <https://www.gnu.org/licenses/>.
 *
 */
-
 #pragma once

 #if NOT_TARGET(__STM32F1__, STM32F1xx, STM32F0xx)
--- a/Marlin/src/pins/stm32f1/pins_LONGER3D_LK.h
+++ b/Marlin/src/pins/stm32f1/pins_LONGER3D_LK.h
@@ -2,6 +2,9 @@
 * Marlin 3D Printer Firmware
 * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
--- a/Marlin/src/pins/stm32f4/pins_ANET_ET4.h
+++ b/Marlin/src/pins/stm32f4/pins_ANET_ET4.h
@@ -19,7 +19,6 @@
 * along with this program.  If not, see <https://www.gnu.org/licenses/>.
 *
 */
-
 #pragma once

 #include "env_validate.h"
--- a/Marlin/src/pins/stm32f4/pins_ANET_ET4P.h
+++ b/Marlin/src/pins/stm32f4/pins_ANET_ET4P.h
@@ -19,7 +19,6 @@
 * along with this program.  If not, see <https://www.gnu.org/licenses/>.
 *
 */
-
 #pragma once

 #define BOARD_INFO_NAME "Anet ET4P 1.x"
--- a/Marlin/src/pins/stm32f4/pins_LERDGE_K.h
+++ b/Marlin/src/pins/stm32f4/pins_LERDGE_K.h
@@ -2,6 +2,9 @@
 * Marlin 3D Printer Firmware
 * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
--- a/Marlin/src/pins/stm32f4/pins_LERDGE_S.h
+++ b/Marlin/src/pins/stm32f4/pins_LERDGE_S.h
@@ -2,6 +2,9 @@
 * Marlin 3D Printer Firmware
 * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
--- a/Marlin/src/pins/stm32f4/pins_LERDGE_X.h
+++ b/Marlin/src/pins/stm32f4/pins_LERDGE_X.h
@@ -2,6 +2,9 @@
 * Marlin 3D Printer Firmware
 * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
--- a/Marlin/src/pins/stm32f4/pins_RUMBA32_BTT.h
+++ b/Marlin/src/pins/stm32f4/pins_RUMBA32_BTT.h
@@ -19,14 +19,13 @@
 * along with this program.  If not, see <https://www.gnu.org/licenses/>.
 *
 */
+#pragma once

 /**
 * No offical schematics have been found.
 * But these differences where noted in https://github.com/bigtreetech/Rumba32/issues/1
 */

-#pragma once
-
 #define BOARD_INFO_NAME "RUMBA32 (BTT)"

 #if NO_EEPROM_SELECTED
--- a/Marlin/src/pins/stm32f4/pins_STEVAL_3DP001V1.h
+++ b/Marlin/src/pins/stm32f4/pins_STEVAL_3DP001V1.h
@@ -19,6 +19,7 @@
 * along with this program.  If not, see <https://www.gnu.org/licenses/>.
 *
 */
+#pragma once

 // Source: https://github.com/stm32duino/Arduino_Core_STM32/blob/master/variants/ST3DP001_EVAL/variant.cpp

@@ -38,8 +39,6 @@
 *          C Runtime Library: "newlib Nano (default)"
 */

-#pragma once
-
 #include "env_validate.h"

 #ifndef MACHINE_NAME