💡 Adjust headers, formatting

2021-09-16 04:36:26 -05:00
parent e7a25a45e6
commit ab9609146f
145 changed files with 269 additions and 36 deletions
--- a/Marlin/src/HAL/AVR/pinsDebug.h
+++ b/Marlin/src/HAL/AVR/pinsDebug.h
@@ -2,6 +2,9 @@
 * Marlin 3D Printer Firmware
 * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
--- a/Marlin/src/HAL/AVR/pinsDebug_Teensyduino.h
+++ b/Marlin/src/HAL/AVR/pinsDebug_Teensyduino.h
@@ -2,6 +2,9 @@
 * Marlin 3D Printer Firmware
 * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
--- a/Marlin/src/HAL/AVR/pinsDebug_plus_70.h
+++ b/Marlin/src/HAL/AVR/pinsDebug_plus_70.h
@@ -2,6 +2,9 @@
 * Marlin 3D Printer Firmware
 * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
--- a/Marlin/src/HAL/DUE/dogm/u8g_com_HAL_DUE_shared_hw_spi.cpp
+++ b/Marlin/src/HAL/DUE/dogm/u8g_com_HAL_DUE_shared_hw_spi.cpp
@@ -20,7 +20,6 @@
 *
 */

-
 /**
 * Based on u8g_com_msp430_hw_spi.c
 *
--- a/Marlin/src/HAL/DUE/pinsDebug.h
+++ b/Marlin/src/HAL/DUE/pinsDebug.h
@@ -2,6 +2,9 @@
 * Marlin 3D Printer Firmware
 * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
--- a/Marlin/src/HAL/ESP32/spi_pins.h
+++ b/Marlin/src/HAL/ESP32/spi_pins.h
@@ -2,6 +2,9 @@
 * Marlin 3D Printer Firmware
 * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
--- a/Marlin/src/HAL/LINUX/main.cpp
+++ b/Marlin/src/HAL/LINUX/main.cpp
@@ -2,6 +2,9 @@
 * Marlin 3D Printer Firmware
 * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
@@ -16,6 +19,7 @@
 * along with this program.  If not, see <https://www.gnu.org/licenses/>.
 *
 */
+
 #ifdef __PLAT_LINUX__

 //#define GPIO_LOGGING // Full GPIO and Positional Logging
--- a/Marlin/src/HAL/LINUX/pinsDebug.h
+++ b/Marlin/src/HAL/LINUX/pinsDebug.h
@@ -2,6 +2,9 @@
 * Marlin 3D Printer Firmware
 * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
--- a/Marlin/src/HAL/LPC1768/pinsDebug.h
+++ b/Marlin/src/HAL/LPC1768/pinsDebug.h
@@ -2,6 +2,9 @@
 * Marlin 3D Printer Firmware
 * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
--- a/Marlin/src/HAL/NATIVE_SIM/pinsDebug.h
+++ b/Marlin/src/HAL/NATIVE_SIM/pinsDebug.h
@@ -20,7 +20,6 @@
 /**
 * Support routines for X86_64
 */
-
 #pragma once

 /**
--- a/Marlin/src/HAL/SAMD51/QSPIFlash.h
+++ b/Marlin/src/HAL/SAMD51/QSPIFlash.h
@@ -25,7 +25,6 @@
 *
 * Derived from Adafruit_SPIFlash class with no SdFat references
 */
-
 #pragma once

 #include <Adafruit_SPIFlashBase.h>
--- a/Marlin/src/HAL/STM32/MarlinSPI.cpp
+++ b/Marlin/src/HAL/STM32/MarlinSPI.cpp
@@ -19,6 +19,7 @@
 * along with this program.  If not, see <https://www.gnu.org/licenses/>.
 *
 */
+
 #include "../platforms.h"

 #if defined(HAL_STM32) && !defined(STM32H7xx)
--- a/Marlin/src/HAL/STM32/MarlinSerial.cpp
+++ b/Marlin/src/HAL/STM32/MarlinSerial.cpp
@@ -2,6 +2,9 @@
 * Marlin 3D Printer Firmware
 * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
@@ -16,6 +19,7 @@
 * along with this program.  If not, see <https://www.gnu.org/licenses/>.
 *
 */
+
 #include "../platforms.h"

 #ifdef HAL_STM32
--- a/Marlin/src/HAL/STM32/MarlinSerial.h
+++ b/Marlin/src/HAL/STM32/MarlinSerial.h
@@ -2,6 +2,9 @@
 * Marlin 3D Printer Firmware
 * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
--- a/Marlin/src/HAL/STM32/Sd2Card_sdio_stm32duino.cpp
+++ b/Marlin/src/HAL/STM32/Sd2Card_sdio_stm32duino.cpp
@@ -19,6 +19,7 @@
 * along with this program.  If not, see <https://www.gnu.org/licenses/>.
 *
 */
+
 #include "../platforms.h"

 #ifdef HAL_STM32
--- a/Marlin/src/HAL/STM32/eeprom_bl24cxx.cpp
+++ b/Marlin/src/HAL/STM32/eeprom_bl24cxx.cpp
@@ -19,6 +19,7 @@
 * along with this program.  If not, see <https://www.gnu.org/licenses/>.
 *
 */
+
 #include "../platforms.h"

 #ifdef HAL_STM32
--- a/Marlin/src/HAL/STM32/eeprom_if_iic.cpp
+++ b/Marlin/src/HAL/STM32/eeprom_if_iic.cpp
@@ -19,6 +19,7 @@
 * along with this program.  If not, see <https://www.gnu.org/licenses/>.
 *
 */
+
 #include "../platforms.h"

 #ifdef HAL_STM32
--- a/Marlin/src/HAL/STM32/eeprom_sdcard.cpp
+++ b/Marlin/src/HAL/STM32/eeprom_sdcard.cpp
@@ -19,6 +19,7 @@
 * along with this program.  If not, see <https://www.gnu.org/licenses/>.
 *
 */
+
 #include "../platforms.h"

 #ifdef HAL_STM32
--- a/Marlin/src/HAL/STM32/fast_pwm.cpp
+++ b/Marlin/src/HAL/STM32/fast_pwm.cpp
@@ -19,6 +19,7 @@
 * along with this program.  If not, see <https://www.gnu.org/licenses/>.
 *
 */
+
 #include "../platforms.h"

 #ifdef HAL_STM32
--- a/Marlin/src/HAL/STM32/pinsDebug.h
+++ b/Marlin/src/HAL/STM32/pinsDebug.h
@@ -2,6 +2,9 @@
 * Marlin 3D Printer Firmware
 * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
--- a/Marlin/src/HAL/STM32/spi_pins.h
+++ b/Marlin/src/HAL/STM32/spi_pins.h
@@ -2,6 +2,9 @@
 * Marlin 3D Printer Firmware
 * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
--- a/Marlin/src/HAL/STM32/tft/tft_fsmc.cpp
+++ b/Marlin/src/HAL/STM32/tft/tft_fsmc.cpp
@@ -19,6 +19,7 @@
 * along with this program.  If not, see <https://www.gnu.org/licenses/>.
 *
 */
+
 #include "../../platforms.h"

 #ifdef HAL_STM32
--- a/Marlin/src/HAL/STM32/tft/tft_spi.cpp
+++ b/Marlin/src/HAL/STM32/tft/tft_spi.cpp
@@ -19,6 +19,7 @@
 * along with this program.  If not, see <https://www.gnu.org/licenses/>.
 *
 */
+
 #include "../../platforms.h"

 #ifdef HAL_STM32
--- a/Marlin/src/HAL/STM32/tft/xpt2046.cpp
+++ b/Marlin/src/HAL/STM32/tft/xpt2046.cpp
@@ -19,6 +19,7 @@
 * along with this program.  If not, see <https://www.gnu.org/licenses/>.
 *
 */
+
 #include "../../platforms.h"

 #ifdef HAL_STM32
--- a/Marlin/src/HAL/STM32/usb_host.cpp
+++ b/Marlin/src/HAL/STM32/usb_host.cpp
@@ -19,6 +19,7 @@
 * along with this program.  If not, see <https://www.gnu.org/licenses/>.
 *
 */
+
 #include "../platforms.h"

 #ifdef HAL_STM32
--- a/Marlin/src/HAL/STM32/usb_serial.cpp
+++ b/Marlin/src/HAL/STM32/usb_serial.cpp
@@ -2,6 +2,9 @@
 * Marlin 3D Printer Firmware
 * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
@@ -16,6 +19,7 @@
 * along with this program.  If not, see <https://www.gnu.org/licenses/>.
 *
 */
+
 #include "../platforms.h"

 #ifdef HAL_STM32
--- a/Marlin/src/HAL/STM32/usb_serial.h
+++ b/Marlin/src/HAL/STM32/usb_serial.h
@@ -2,6 +2,9 @@
 * Marlin 3D Printer Firmware
 * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
--- a/Marlin/src/HAL/STM32/watchdog.cpp
+++ b/Marlin/src/HAL/STM32/watchdog.cpp
@@ -19,6 +19,7 @@
 * along with this program.  If not, see <https://www.gnu.org/licenses/>.
 *
 */
+
 #include "../platforms.h"

 #ifdef HAL_STM32
--- a/Marlin/src/HAL/STM32F1/dogm/u8g_com_stm32duino_swspi.cpp
+++ b/Marlin/src/HAL/STM32F1/dogm/u8g_com_stm32duino_swspi.cpp
@@ -2,6 +2,9 @@
 * Marlin 3D Printer Firmware
 * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
@@ -16,6 +19,7 @@
 * along with this program.  If not, see <https://www.gnu.org/licenses/>.
 *
 */
+
 #ifdef __STM32F1__

 #include "../../../inc/MarlinConfig.h"
--- a/Marlin/src/HAL/STM32F1/eeprom_wired.cpp
+++ b/Marlin/src/HAL/STM32F1/eeprom_wired.cpp
@@ -2,6 +2,9 @@
 * Marlin 3D Printer Firmware
 * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
--- a/Marlin/src/HAL/STM32F1/pinsDebug.h
+++ b/Marlin/src/HAL/STM32F1/pinsDebug.h
@@ -2,6 +2,9 @@
 * Marlin 3D Printer Firmware
 * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
--- a/Marlin/src/HAL/STM32F1/spi_pins.h
+++ b/Marlin/src/HAL/STM32F1/spi_pins.h
@@ -2,6 +2,9 @@
 * Marlin 3D Printer Firmware
 * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
--- a/Marlin/src/HAL/TEENSY31_32/eeprom.cpp
+++ b/Marlin/src/HAL/TEENSY31_32/eeprom.cpp
@@ -2,6 +2,9 @@
 * Marlin 3D Printer Firmware
 * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
@@ -16,6 +19,7 @@
 * along with this program.  If not, see <https://www.gnu.org/licenses/>.
 *
 */
+
 #ifdef __MK20DX256__

 /**
--- a/Marlin/src/HAL/TEENSY35_36/pinsDebug.h
+++ b/Marlin/src/HAL/TEENSY35_36/pinsDebug.h
@@ -2,6 +2,9 @@
 * Marlin 3D Printer Firmware
 * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
--- a/Marlin/src/HAL/TEENSY40_41/pinsDebug.h
+++ b/Marlin/src/HAL/TEENSY40_41/pinsDebug.h
@@ -2,6 +2,9 @@
 * Marlin 3D Printer Firmware
 * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
--- a/Marlin/src/HAL/shared/Delay.cpp
+++ b/Marlin/src/HAL/shared/Delay.cpp
@@ -19,6 +19,7 @@
 * along with this program.  If not, see <https://www.gnu.org/licenses/>.
 *
 */
+
 #include "Delay.h"

 #include "../../inc/MarlinConfig.h"