bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity

MIN_SEGMENTS_FOR_MOVE => MIN_STEPS_PER_SEGMENT

Browse Source 
Follow-up to #4666
This commit is contained in:
Scott Lahteine
2016-08-21 08:56:03 -05:00
parent 27b80b1dd1
commit ab59280075
20 changed files with 40 additions and 40 deletions
Download Patch File Download Diff File Expand all files Collapse all files

4
Marlin/Configuration_adv.h
View File

@@ -530,8 +530,8 @@
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
//#define BEZIER_CURVE_SUPPORT
// Moves with fewer segments than this will be ignored and joined with the next movement
#define MIN_SEGMENTS_FOR_MOVE 6
// Moves (or segments) with fewer steps than this will be joined with the next move
#define MIN_STEPS_PER_SEGMENT 6
// @section temperature

4
Marlin/SanityCheck.h
View File

@@ -133,8 +133,8 @@
#error "Z_RAISE_(BEFORE|AFTER)_PROBING are deprecated. Use Z_PROBE_DEPLOY_HEIGHT instead."
#elif defined(Z_RAISE_PROBE_DEPLOY_STOW) || defined(Z_RAISE_BETWEEN_PROBINGS)
#error "Z_RAISE_PROBE_DEPLOY_STOW and Z_RAISE_BETWEEN_PROBINGS are now Z_PROBE_DEPLOY_HEIGHT and Z_PROBE_TRAVEL_HEIGHT Please update your configuration."
#elif !defined(MIN_SEGMENTS_FOR_MOVE)
#error "\"dropsegments\" is replaced with MIN_SEGMENTS_FOR_MOVE (and increases by 1). Please update Configuration_adv.h."
#elif !defined(MIN_STEPS_PER_SEGMENT)
#error "\"dropsegments\" is replaced with MIN_STEPS_PER_SEGMENT (and increases by 1). Please update Configuration_adv.h."
#elif defined(PREVENT_DANGEROUS_EXTRUDE)
#error "PREVENT_DANGEROUS_EXTRUDE is now PREVENT_COLD_EXTRUSION. Please update your configuration."
#endif

4
Marlin/example_configurations/Cartesio/Configuration_adv.h
View File

@@ -530,8 +530,8 @@
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
//#define BEZIER_CURVE_SUPPORT
// Moves with fewer segments than this will be ignored and joined with the next movement
#define MIN_SEGMENTS_FOR_MOVE 6
// Moves (or segments) with fewer steps than this will be joined with the next move
#define MIN_STEPS_PER_SEGMENT 6
// @section temperature

4
Marlin/example_configurations/Felix/Configuration_adv.h
View File

@@ -530,8 +530,8 @@
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
//#define BEZIER_CURVE_SUPPORT
// Moves with fewer segments than this will be ignored and joined with the next movement
#define MIN_SEGMENTS_FOR_MOVE 6
// Moves (or segments) with fewer steps than this will be joined with the next move
#define MIN_STEPS_PER_SEGMENT 6
// @section temperature

4
Marlin/example_configurations/Hephestos/Configuration_adv.h
View File

@@ -530,8 +530,8 @@
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
//#define BEZIER_CURVE_SUPPORT
// Moves with fewer segments than this will be ignored and joined with the next movement
#define MIN_SEGMENTS_FOR_MOVE 6
// Moves (or segments) with fewer steps than this will be joined with the next move
#define MIN_STEPS_PER_SEGMENT 6
// @section temperature

4
Marlin/example_configurations/Hephestos_2/Configuration_adv.h
View File

@@ -530,8 +530,8 @@
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
//#define BEZIER_CURVE_SUPPORT
// Moves with fewer segments than this will be ignored and joined with the next movement
#define MIN_SEGMENTS_FOR_MOVE 6
// Moves (or segments) with fewer steps than this will be joined with the next move
#define MIN_STEPS_PER_SEGMENT 6
// @section temperature

4
Marlin/example_configurations/K8200/Configuration_adv.h
View File

@@ -536,8 +536,8 @@
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
//#define BEZIER_CURVE_SUPPORT
// Moves with fewer segments than this will be ignored and joined with the next movement
#define MIN_SEGMENTS_FOR_MOVE 3
// Moves (or segments) with fewer steps than this will be joined with the next move
#define MIN_STEPS_PER_SEGMENT 3
// @section temperature

4
Marlin/example_configurations/K8400/Configuration_adv.h
View File

@@ -530,8 +530,8 @@
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
//#define BEZIER_CURVE_SUPPORT
// Moves with fewer segments than this will be ignored and joined with the next movement
#define MIN_SEGMENTS_FOR_MOVE 6
// Moves (or segments) with fewer steps than this will be joined with the next move
#define MIN_STEPS_PER_SEGMENT 6
// @section temperature

4
Marlin/example_configurations/RigidBot/Configuration_adv.h
View File

@@ -530,8 +530,8 @@
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
//#define BEZIER_CURVE_SUPPORT
// Moves with fewer segments than this will be ignored and joined with the next movement
#define MIN_SEGMENTS_FOR_MOVE 6
// Moves (or segments) with fewer steps than this will be joined with the next move
#define MIN_STEPS_PER_SEGMENT 6
// @section temperature

4
Marlin/example_configurations/SCARA/Configuration_adv.h
View File

@@ -530,8 +530,8 @@
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
//#define BEZIER_CURVE_SUPPORT
// Moves with fewer segments than this will be ignored and joined with the next movement
#define MIN_SEGMENTS_FOR_MOVE 6
// Moves (or segments) with fewer steps than this will be joined with the next move
#define MIN_STEPS_PER_SEGMENT 6
// @section temperature

4
Marlin/example_configurations/TAZ4/Configuration_adv.h
View File

@@ -538,8 +538,8 @@
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
//#define BEZIER_CURVE_SUPPORT
// Moves with fewer segments than this will be ignored and joined with the next movement
#define MIN_SEGMENTS_FOR_MOVE 6
// Moves (or segments) with fewer steps than this will be joined with the next move
#define MIN_STEPS_PER_SEGMENT 6
// @section temperature

4
Marlin/example_configurations/WITBOX/Configuration_adv.h
View File

@@ -530,8 +530,8 @@
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
//#define BEZIER_CURVE_SUPPORT
// Moves with fewer segments than this will be ignored and joined with the next movement
#define MIN_SEGMENTS_FOR_MOVE 6
// Moves (or segments) with fewer steps than this will be joined with the next move
#define MIN_STEPS_PER_SEGMENT 6
// @section temperature

4
Marlin/example_configurations/delta/biv2.5/Configuration_adv.h
View File

@@ -532,8 +532,8 @@
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
//#define BEZIER_CURVE_SUPPORT
// Moves with fewer segments than this will be ignored and joined with the next movement
#define MIN_SEGMENTS_FOR_MOVE 6
// Moves (or segments) with fewer steps than this will be joined with the next move
#define MIN_STEPS_PER_SEGMENT 6
// @section temperature

4
Marlin/example_configurations/delta/generic/Configuration_adv.h
View File

@@ -532,8 +532,8 @@
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
//#define BEZIER_CURVE_SUPPORT
// Moves with fewer segments than this will be ignored and joined with the next movement
#define MIN_SEGMENTS_FOR_MOVE 6
// Moves (or segments) with fewer steps than this will be joined with the next move
#define MIN_STEPS_PER_SEGMENT 6
// @section temperature

4
Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h
View File

@@ -531,8 +531,8 @@
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
//#define BEZIER_CURVE_SUPPORT
// Moves with fewer segments than this will be ignored and joined with the next movement
#define MIN_SEGMENTS_FOR_MOVE 6
// Moves (or segments) with fewer steps than this will be joined with the next move
#define MIN_STEPS_PER_SEGMENT 6
// @section temperature

4
Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h
View File

@@ -536,8 +536,8 @@
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
//#define BEZIER_CURVE_SUPPORT
// Moves with fewer segments than this will be ignored and joined with the next movement
#define MIN_SEGMENTS_FOR_MOVE 6
// Moves (or segments) with fewer steps than this will be joined with the next move
#define MIN_STEPS_PER_SEGMENT 6
// @section temperature

4
Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h
View File

@@ -532,8 +532,8 @@
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
//#define BEZIER_CURVE_SUPPORT
// Moves with fewer segments than this will be ignored and joined with the next movement
#define MIN_SEGMENTS_FOR_MOVE 6
// Moves (or segments) with fewer steps than this will be joined with the next move
#define MIN_STEPS_PER_SEGMENT 6
// @section temperature

4
Marlin/example_configurations/makibox/Configuration_adv.h
View File

@@ -530,8 +530,8 @@
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
//#define BEZIER_CURVE_SUPPORT
// Moves with fewer segments than this will be ignored and joined with the next movement
#define MIN_SEGMENTS_FOR_MOVE 6
// Moves (or segments) with fewer steps than this will be joined with the next move
#define MIN_STEPS_PER_SEGMENT 6
// @section temperature

4
Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h
View File

@@ -530,8 +530,8 @@
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
//#define BEZIER_CURVE_SUPPORT
// Moves with fewer segments than this will be ignored and joined with the next movement
#define MIN_SEGMENTS_FOR_MOVE 6
// Moves (or segments) with fewer steps than this will be joined with the next move
#define MIN_STEPS_PER_SEGMENT 6
// @section temperature

4
Marlin/planner.cpp
View File

@@ -626,7 +626,7 @@ void Planner::check_axes_activity() {
block->step_event_count = MAX4(block->steps[X_AXIS], block->steps[Y_AXIS], block->steps[Z_AXIS], block->steps[E_AXIS]);
// Bail if this is a zero-length block
if (block->step_event_count < MIN_SEGMENTS_FOR_MOVE) return;
if (block->step_event_count < MIN_STEPS_PER_SEGMENT) return;
// For a mixing extruder, get a magnified step_event_count for each
#if ENABLED(MIXING_EXTRUDER)
@@ -808,7 +808,7 @@ void Planner::check_axes_activity() {
#endif
delta_mm[E_AXIS] = 0.01 * (de * steps_to_mm[E_AXIS]) * volumetric_multiplier[extruder] * flow_percentage[extruder];
if (block->steps[X_AXIS] < MIN_SEGMENTS_FOR_MOVE && block->steps[Y_AXIS] < MIN_SEGMENTS_FOR_MOVE && block->steps[Z_AXIS] < MIN_SEGMENTS_FOR_MOVE) {
if (block->steps[X_AXIS] < MIN_STEPS_PER_SEGMENT && block->steps[Y_AXIS] < MIN_STEPS_PER_SEGMENT && block->steps[Z_AXIS] < MIN_STEPS_PER_SEGMENT) {
block->millimeters = fabs(delta_mm[E_AXIS]);
}
else {