bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity

Apply composite tests

Browse Source
This commit is contained in:
Scott Lahteine
2020-04-23 21:42:38 -05:00
parent 55d66fb897
commit ab2b98e425
53 changed files with 103 additions and 107 deletions
Download Patch File Download Diff File Expand all files Collapse all files

2
Marlin/src/HAL/AVR/MarlinSerial.h
View File

@ -304,7 +304,7 @@
static constexpr bool XONOFF = false;
static constexpr bool EMERGENCYPARSER = false;
static constexpr bool DROPPED_RX = false;
static constexpr bool RX_OVERRUNS = HAS_DGUS_LCD && ENABLED(DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS);
static constexpr bool RX_OVERRUNS = BOTH(HAS_DGUS_LCD, DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS);
static constexpr bool RX_FRAMING_ERRORS = false;
static constexpr bool MAX_RX_QUEUED = false;
};

4
Marlin/src/HAL/AVR/inc/SanityCheck.h
View File

@ -46,10 +46,10 @@
/**
* The Trinamic library includes SoftwareSerial.h, leading to a compile error.
*/
#if HAS_TRINAMIC_CONFIG && ENABLED(ENDSTOP_INTERRUPTS_FEATURE)
#if BOTH(HAS_TRINAMIC_CONFIG, ENDSTOP_INTERRUPTS_FEATURE)
#error "TMCStepper includes SoftwareSerial.h which is incompatible with ENDSTOP_INTERRUPTS_FEATURE. Disable ENDSTOP_INTERRUPTS_FEATURE to continue."
#endif
#if HAS_TMC_SW_SERIAL && ENABLED(MONITOR_DRIVER_STATUS)
#if BOTH(HAS_TMC_SW_SERIAL, MONITOR_DRIVER_STATUS)
#error "MONITOR_DRIVER_STATUS causes performance issues when used with SoftwareSerial-connected drivers. Disable MONITOR_DRIVER_STATUS or use hardware serial to continue."
#endif

2
Marlin/src/HAL/LINUX/spi_pins.h
View File

@ -24,7 +24,7 @@
#include "../../core/macros.h"
#include "../../inc/MarlinConfigPre.h"
#if HAS_GRAPHICAL_LCD && ENABLED(SDSUPPORT) && (LCD_PINS_D4 == SCK_PIN || LCD_PINS_ENABLE == MOSI_PIN || DOGLCD_SCK == SCK_PIN || DOGLCD_MOSI == MOSI_PIN)
#if BOTH(HAS_GRAPHICAL_LCD, SDSUPPORT) && (LCD_PINS_D4 == SCK_PIN || LCD_PINS_ENABLE == MOSI_PIN || DOGLCD_SCK == SCK_PIN || DOGLCD_MOSI == MOSI_PIN)
#define LPC_SOFTWARE_SPI // If the SD card and LCD adapter share the same SPI pins, then software SPI is currently
// needed due to the speed and mode required for communicating with each device being different.
// This requirement can be removed if the SPI access to these devices is updated to use

2
Marlin/src/HAL/LPC1768/spi_pins.h
View File

@ -23,7 +23,7 @@
#include "../../core/macros.h"
#if ENABLED(SDSUPPORT) && HAS_GRAPHICAL_LCD && (LCD_PINS_D4 == SCK_PIN || LCD_PINS_ENABLE == MOSI_PIN || DOGLCD_SCK == SCK_PIN || DOGLCD_MOSI == MOSI_PIN)
#if BOTH(SDSUPPORT, HAS_GRAPHICAL_LCD) && (LCD_PINS_D4 == SCK_PIN || LCD_PINS_ENABLE == MOSI_PIN || DOGLCD_SCK == SCK_PIN || DOGLCD_MOSI == MOSI_PIN)
#define LPC_SOFTWARE_SPI // If the SD card and LCD adapter share the same SPI pins, then software SPI is currently
// needed due to the speed and mode required for communicating with each device being different.
// This requirement can be removed if the SPI access to these devices is updated to use

2
Marlin/src/HAL/STM32F1/dogm/u8g_com_stm32duino_swspi.cpp
View File

@ -20,7 +20,7 @@
#include "../../../inc/MarlinConfig.h"
#if HAS_GRAPHICAL_LCD && ENABLED(FORCE_SOFT_SPI)
#if BOTH(HAS_GRAPHICAL_LCD, FORCE_SOFT_SPI)
#include "../HAL.h"
#include <U8glib.h>

2
Marlin/src/HAL/shared/HAL_ST7920.h
View File

@ -27,7 +27,7 @@
* (bypassing U8G), it will allow the LIGHTWEIGHT_UI to operate.
*/
#if HAS_GRAPHICAL_LCD && ENABLED(LIGHTWEIGHT_UI)
#if BOTH(HAS_GRAPHICAL_LCD, LIGHTWEIGHT_UI)
void ST7920_cs();
void ST7920_ncs();
void ST7920_set_cmd();