bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity

Merge bugfix-2.0.x into 2.0.x

Browse Source
This commit is contained in:
Scott Lahteine 2020-09-28 20:59:49 -05:00
commit aac0326f7f
696 changed files with 30302 additions and 12723 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
.github/workflows/test-builds.yml vendored
View File

@ -41,6 +41,7 @@ jobs:
- mega2560
- teensy31
- teensy35
- teensy41
- SAMD51_grandcentral_m4
# Extended AVR Environments
@ -70,6 +71,7 @@ jobs:
- mks_robin_stm32
- ARMED
- FYSETC_S6
- STM32F070CB_malyan
- STM32F070RB_malyan
- malyan_M300
- mks_robin_lite

57
Marlin/Configuration.h
View File

@ -34,9 +34,8 @@
* - Extra features
*
* Advanced settings can be found in Configuration_adv.h
*
*/
#define CONFIGURATION_H_VERSION 020006
#define CONFIGURATION_H_VERSION 020007
//===========================================================================
//============================= Getting Started =============================
@ -390,6 +389,7 @@
* 21 : Pt100 with circuit in the Ultimainboard V2.x with 3.3v excitation (STM32 \ LPC176x....)
* 22 : 100k (hotend) with 4.7k pullup to 3.3V and 220R to analog input (as in GTM32 Pro vB)
* 23 : 100k (bed) with 4.7k pullup to 3.3v and 220R to analog input (as in GTM32 Pro vB)
* 30 : Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K / B3950 (4.7k pullup)
* 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
* 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
@ -486,24 +486,17 @@
//#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM)
//#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders)
// Set/get with gcode: M301 E[extruder number, 0-2]
// If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
// Ultimaker
#define DEFAULT_Kp 22.2
#if ENABLED(PID_PARAMS_PER_HOTEND)
// Specify between 1 and HOTENDS values per array.
// If fewer than EXTRUDER values are provided, the last element will be repeated.
#define DEFAULT_Kp_LIST { 22.20, 20.0 }
#define DEFAULT_Ki_LIST { 1.08, 1.0 }
#define DEFAULT_Kd_LIST { 114.00, 112.0 }
#else
#define DEFAULT_Kp 22.20
#define DEFAULT_Ki 1.08
#define DEFAULT_Kd 114
// MakerGear
//#define DEFAULT_Kp 7.0
//#define DEFAULT_Ki 0.1
//#define DEFAULT_Kd 12
// Mendel Parts V9 on 12V
//#define DEFAULT_Kp 63.0
//#define DEFAULT_Ki 2.25
//#define DEFAULT_Kd 440
#define DEFAULT_Kd 114.00
#endif
#endif // PIDTEMP
//===========================================================================
@ -545,12 +538,6 @@
#define DEFAULT_bedKi .023
#define DEFAULT_bedKd 305.4
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from pidautotune
//#define DEFAULT_bedKp 97.1
//#define DEFAULT_bedKi 1.41
//#define DEFAULT_bedKd 1675.16
// FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
#endif // PIDTEMPBED
@ -608,7 +595,7 @@
// @section machine
// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics
// Enable one of the options below for CoreXY, CoreXZ, or CoreYZ kinematics,
// either in the usual order or reversed
//#define COREXY
//#define COREXZ
@ -616,6 +603,7 @@
//#define COREYX
//#define COREZX
//#define COREZY
//#define MARKFORGED_XY // MarkForged. See https://reprap.org/forum/read.php?152,504042
//===========================================================================
//============================== Endstop Settings ===========================
@ -866,7 +854,6 @@
* - For simple switches connect...
* - normally-closed switches to GND and D32.
* - normally-open switches to 5V and D32.
*
*/
//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
@ -1578,7 +1565,6 @@
*
* Caveats: The ending Z should be the same as starting Z.
* Attention: EXPERIMENTAL. G-code arguments may change.
*
*/
//#define NOZZLE_CLEAN_FEATURE
@ -1731,7 +1717,6 @@
*
* SD Card support is disabled by default. If your controller has an SD slot,
* you must uncomment the following option or it won't work.
*
*/
//#define SDSUPPORT
@ -1968,6 +1953,14 @@
//
//#define FF_INTERFACEBOARD
//
// TFT GLCD Panel with Marlin UI
// Panel connected to main board by SPI or I2C interface.
// See https://github.com/Serhiy-K/TFTGLCDAdapter
//
//#define TFTGLCD_PANEL_SPI
//#define TFTGLCD_PANEL_I2C
//=============================================================================
//======================= LCD / Controller Selection =======================
//========================= (Graphical LCDs) ========================
@ -2171,6 +2164,9 @@
// Touch-screen LCD for Malyan M200/M300 printers
//
//#define MALYAN_LCD
#if ENABLED(MALYAN_LCD)
#define LCD_SERIAL_PORT 1 // Default is 1 for Malyan M200
#endif
//
// Touch UI for FTDI EVE (FT800/FT810) displays
@ -2184,7 +2180,7 @@
//#define ANYCUBIC_LCD_I3MEGA
//#define ANYCUBIC_LCD_CHIRON
#if EITHER(ANYCUBIC_LCD_I3MEGA, ANYCUBIC_LCD_CHIRON)
#define ANYCUBIC_LCD_SERIAL_PORT 3
#define LCD_SERIAL_PORT 3 // Default is 3 for Anycubic
//#define ANYCUBIC_LCD_DEBUG
#endif
@ -2343,7 +2339,6 @@
* *** CAUTION ***
*
* LED Type. Enable only one of the following two options.
*
*/
//#define RGB_LED
//#define RGBW_LED

48
Marlin/Configuration_adv.h
View File

@ -29,9 +29,8 @@
* Some of these settings can damage your printer if improperly set!
*
* Basic settings can be found in Configuration.h
*
*/
#define CONFIGURATION_ADV_H_VERSION 020006
#define CONFIGURATION_ADV_H_VERSION 020007
// @section temperature
@ -738,7 +737,6 @@
* | 4 3 | 1 4 | 2 1 | 3 2 |
* | | | | |
* | 1 2 | 2 3 | 3 4 | 4 1 |
*
*/
#ifndef Z_STEPPER_ALIGN_XY
//#define Z_STEPPERS_ORIENTATION 0
@ -773,7 +771,6 @@
//
//#define ASSISTED_TRAMMING
#if ENABLED(ASSISTED_TRAMMING)
// Define positions for probing points, use the hotend as reference not the sensor.
#define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } }
@ -786,6 +783,9 @@
// Enable to restore leveling setup after operation
#define RESTORE_LEVELING_AFTER_G35
// Add a menu item for Assisted Tramming
//#define ASSISTED_TRAMMING_MENU_ITEM
/**
* Screw thread:
* M3: 30 = Clockwise, 31 = Counter-Clockwise
@ -793,7 +793,6 @@
* M5: 50 = Clockwise, 51 = Counter-Clockwise
*/
#define TRAMMING_SCREW_THREAD 30
#endif
// @section motion
@ -1105,16 +1104,18 @@
#define BOOTSCREEN_TIMEOUT 4000 // (ms) Total Duration to display the boot screen(s)
#endif
#if HAS_GRAPHICAL_LCD && EITHER(SDSUPPORT, LCD_SET_PROGRESS_MANUALLY)
//#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits
#if EITHER(SDSUPPORT, LCD_SET_PROGRESS_MANUALLY) && ANY(HAS_MARLINUI_U8GLIB, HAS_MARLINUI_HD44780, IS_TFTGLCD_PANEL)
//#define SHOW_REMAINING_TIME // Display estimated time to completion
#if ENABLED(SHOW_REMAINING_TIME)
//#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation
//#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time
#endif
#if HAS_MARLINUI_U8GLIB
//#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits
#endif
#if HAS_CHARACTER_LCD && EITHER(SDSUPPORT, LCD_SET_PROGRESS_MANUALLY)
#if EITHER(HAS_MARLINUI_HD44780, IS_TFTGLCD_PANEL)
//#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
#if ENABLED(LCD_PROGRESS_BAR)
#define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar
@ -1124,6 +1125,7 @@
//#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar
#endif
#endif
#endif
#if ENABLED(SDSUPPORT)
@ -1164,6 +1166,7 @@
#if ENABLED(POWER_LOSS_RECOVERY)
#define PLR_ENABLED_DEFAULT false // Power Loss Recovery enabled by default. (Set with 'M413 Sn' & M500)
//#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss
//#define POWER_LOSS_RECOVER_ZHOME // Z homing is needed for proper recovery. 99.9% of the time this should be disabled!
//#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS)
//#define POWER_LOSS_PIN 44 // Pin to detect power loss. Set to -1 to disable default pin on boards without module.
//#define POWER_LOSS_STATE HIGH // State of pin indicating power loss
@ -1324,7 +1327,7 @@
* controller events, as there is a trade-off between reliable
* printing performance versus fast display updates.
*/
#if HAS_GRAPHICAL_LCD
#if HAS_MARLINUI_U8GLIB
// Show SD percentage next to the progress bar
//#define DOGM_SD_PERCENT
@ -1394,18 +1397,18 @@
//#define MARLIN_SNAKE
//#define GAMES_EASTER_EGG // Add extra blank lines above the "Games" sub-menu
#endif // HAS_GRAPHICAL_LCD
#endif // HAS_MARLINUI_U8GLIB
//
// Additional options for DGUS / DWIN displays
//
#if HAS_DGUS_LCD
#define DGUS_SERIAL_PORT 3
#define DGUS_BAUDRATE 115200
#define LCD_SERIAL_PORT 3
#define LCD_BAUDRATE 115200
#define DGUS_RX_BUFFER_SIZE 128
#define DGUS_TX_BUFFER_SIZE 48
//#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR)
//#define SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR)
#define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates
@ -1572,6 +1575,7 @@
#if ENABLED(BABYSTEPPING)
//#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR
//#define BABYSTEP_WITHOUT_HOMING
//#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement).
//#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
#define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
//#define BABYSTEP_MILLIMETER_UNITS // Specify BABYSTEP_MULTIPLICATOR_(XY|Z) in mm instead of micro-steps
@ -1582,7 +1586,6 @@
#if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING)
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
// Note: Extra time may be added to mitigate controller latency.
//#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement).
//#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle.
#if ENABLED(MOVE_Z_WHEN_IDLE)
#define MOVE_Z_IDLE_MULTIPLICATOR 1 // Multiply 1mm by this factor for the move step size.
@ -1950,7 +1953,6 @@
* Be sure to turn off auto-retract during filament change.
*
* Note that M207 / M208 / M209 settings are saved to EEPROM.
*
*/
//#define FWRETRACT
#if ENABLED(FWRETRACT)
@ -1976,7 +1978,7 @@
* Universal tool change settings.
* Applies to all types of extruders except where explicitly noted.
*/
#if EXTRUDERS > 1
#if HAS_MULTI_EXTRUDER
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
//#define TOOLCHANGE_ZRAISE_BEFORE_RETRACT // Apply raise before swap retraction (if enabled)
@ -2040,7 +2042,7 @@
//#define TOOLCHANGE_PARK_X_ONLY // X axis only move
//#define TOOLCHANGE_PARK_Y_ONLY // Y axis only move
#endif
#endif // EXTRUDERS > 1
#endif // HAS_MULTI_EXTRUDER
/**
* Advanced Pause
@ -2487,7 +2489,7 @@
#define E7_HYBRID_THRESHOLD 30
/**
* Use StallGuard2 to home / probe X, Y, Z.
* Use StallGuard to home / probe X, Y, Z.
*
* TMC2130, TMC2160, TMC2209, TMC2660, TMC5130, and TMC5160 only
* Connect the stepper driver's DIAG1 pin to the X/Y endstop pin.
@ -2508,6 +2510,8 @@
*
* IMPROVE_HOMING_RELIABILITY tunes acceleration and jerk when
* homing and adds a guard period for endstop triggering.
*
* Comment *_STALL_SENSITIVITY to disable sensorless homing for that axis.
*/
//#define SENSORLESS_HOMING // StallGuard capable drivers only
@ -3227,6 +3231,7 @@
//#define HOST_ACTION_COMMANDS
#if ENABLED(HOST_ACTION_COMMANDS)
//#define HOST_PROMPT_SUPPORT
//#define HOST_START_MENU_ITEM // Add a menu item that tells the host to start
#endif
/**
@ -3334,6 +3339,7 @@
#define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max
#define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 }
#define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 }
//#define JOYSTICK_DEBUG
#endif
/**
@ -3411,10 +3417,10 @@
#if ENABLED(PRUSA_MMU2)
// Serial port used for communication with MMU2.
// For AVR enable the UART port used for the MMU. (e.g., internalSerial)
// For AVR enable the UART port used for the MMU. (e.g., mmuSerial)
// For 32-bit boards check your HAL for available serial ports. (e.g., Serial2)
#define INTERNAL_SERIAL_PORT 2
#define MMU2_SERIAL internalSerial
#define MMU2_SERIAL_PORT 2
#define MMU2_SERIAL mmuSerial
// Use hardware reset for MMU if a pin is defined for it
//#define MMU2_RST_PIN 23

108
Marlin/Makefile
View File

@ -170,110 +170,114 @@ else ifeq ($(HARDWARE_MOTHERBOARD),1100)
else ifeq ($(HARDWARE_MOTHERBOARD),1101)
# Velleman K8400 Controller (derived from 3Drag Controller)
else ifeq ($(HARDWARE_MOTHERBOARD),1102)
# Velleman K8600 Controller (derived from 3Drag Controller)
# Velleman K8600 Controller (Vertex Nano)
else ifeq ($(HARDWARE_MOTHERBOARD),1103)
# 2PrintBeta BAM&DICE with STK drivers
# Velleman K8800 Controller (Vertex Delta)
else ifeq ($(HARDWARE_MOTHERBOARD),1104)
# 2PrintBeta BAM&DICE Due with STK drivers
# 2PrintBeta BAM&DICE with STK drivers
else ifeq ($(HARDWARE_MOTHERBOARD),1105)
# MKS BASE v1.0
# 2PrintBeta BAM&DICE Due with STK drivers
else ifeq ($(HARDWARE_MOTHERBOARD),1106)
# MKS v1.4 with A4982 stepper drivers
# MKS BASE v1.0
else ifeq ($(HARDWARE_MOTHERBOARD),1107)
# MKS v1.5 with Allegro A4982 stepper drivers
# MKS v1.4 with A4982 stepper drivers
else ifeq ($(HARDWARE_MOTHERBOARD),1108)
# MKS v1.6 with Allegro A4982 stepper drivers
# MKS v1.5 with Allegro A4982 stepper drivers
else ifeq ($(HARDWARE_MOTHERBOARD),1109)
# MKS BASE 1.0 with Heroic HR4982 stepper drivers
# MKS v1.6 with Allegro A4982 stepper drivers
else ifeq ($(HARDWARE_MOTHERBOARD),1110)
# MKS GEN v1.3 or 1.4
# MKS BASE 1.0 with Heroic HR4982 stepper drivers
else ifeq ($(HARDWARE_MOTHERBOARD),1111)
# MKS GEN L
# MKS GEN v1.3 or 1.4
else ifeq ($(HARDWARE_MOTHERBOARD),1112)
# zrib V2.0 control board (Chinese knock off RAMPS replica)
# MKS GEN L
else ifeq ($(HARDWARE_MOTHERBOARD),1113)
# BigTreeTech or BIQU KFB2.0
# zrib V2.0 control board (Chinese knock off RAMPS replica)
else ifeq ($(HARDWARE_MOTHERBOARD),1114)
# Felix 2.0+ Electronics Board (RAMPS like)
# BigTreeTech or BIQU KFB2.0
else ifeq ($(HARDWARE_MOTHERBOARD),1115)
# Invent-A-Part RigidBoard
# Felix 2.0+ Electronics Board (RAMPS like)
else ifeq ($(HARDWARE_MOTHERBOARD),1116)
# Invent-A-Part RigidBoard V2
# Invent-A-Part RigidBoard
else ifeq ($(HARDWARE_MOTHERBOARD),1117)
# Sainsmart 2-in-1 board
# Invent-A-Part RigidBoard V2
else ifeq ($(HARDWARE_MOTHERBOARD),1118)
# Ultimaker
# Sainsmart 2-in-1 board
else ifeq ($(HARDWARE_MOTHERBOARD),1119)
# Ultimaker (Older electronics. Pre 1.5.4. This is rare)
# Ultimaker
else ifeq ($(HARDWARE_MOTHERBOARD),1120)
# Ultimaker (Older electronics. Pre 1.5.4. This is rare)
else ifeq ($(HARDWARE_MOTHERBOARD),1121)
MCU ?= atmega1280
# Azteeg X3
else ifeq ($(HARDWARE_MOTHERBOARD),1121)
# Azteeg X3 Pro
else ifeq ($(HARDWARE_MOTHERBOARD),1122)
# Ultimainboard 2.x (Uses TEMP_SENSOR 20)
# Azteeg X3 Pro
else ifeq ($(HARDWARE_MOTHERBOARD),1123)
# Rumba
# Ultimainboard 2.x (Uses TEMP_SENSOR 20)
else ifeq ($(HARDWARE_MOTHERBOARD),1124)
# Raise3D Rumba
# Rumba
else ifeq ($(HARDWARE_MOTHERBOARD),1125)
# Rapide Lite RL200 Rumba
# Raise3D Rumba
else ifeq ($(HARDWARE_MOTHERBOARD),1126)
# Formbot T-Rex 2 Plus
# Rapide Lite RL200 Rumba
else ifeq ($(HARDWARE_MOTHERBOARD),1127)
# Formbot T-Rex 3
# Formbot T-Rex 2 Plus
else ifeq ($(HARDWARE_MOTHERBOARD),1128)
# Formbot Raptor
# Formbot T-Rex 3
else ifeq ($(HARDWARE_MOTHERBOARD),1129)
# Formbot Raptor 2
# Formbot Raptor
else ifeq ($(HARDWARE_MOTHERBOARD),1130)
# bq ZUM Mega 3D
# Formbot Raptor 2
else ifeq ($(HARDWARE_MOTHERBOARD),1131)
# MakeBoard Mini v2.1.2 is a control board sold by MicroMake
# bq ZUM Mega 3D
else ifeq ($(HARDWARE_MOTHERBOARD),1132)
# TriGorilla Anycubic version 1.3 based on RAMPS EFB
# MakeBoard Mini v2.1.2 is a control board sold by MicroMake
else ifeq ($(HARDWARE_MOTHERBOARD),1133)
# TriGorilla Anycubic version 1.4 based on RAMPS EFB
# TriGorilla Anycubic version 1.3 based on RAMPS EFB
else ifeq ($(HARDWARE_MOTHERBOARD),1134)
# TriGorilla Anycubic version 1.4 Rev 1.1
# TriGorilla Anycubic version 1.4 based on RAMPS EFB
else ifeq ($(HARDWARE_MOTHERBOARD),1135)
# Creality: Ender-4, CR-8
# TriGorilla Anycubic version 1.4 Rev 1.1
else ifeq ($(HARDWARE_MOTHERBOARD),1136)
# Creality: CR10S, CR20, CR-X
# Creality: Ender-4, CR-8
else ifeq ($(HARDWARE_MOTHERBOARD),1137)
# Dagoma F5
# Creality: CR10S, CR20, CR-X
else ifeq ($(HARDWARE_MOTHERBOARD),1138)
# FYSETC F6 1.3
# Dagoma F5
else ifeq ($(HARDWARE_MOTHERBOARD),1139)
# FYSETC F6 1.5
# FYSETC F6 1.3
else ifeq ($(HARDWARE_MOTHERBOARD),1140)
# Duplicator i3 Plus
# FYSETC F6 1.5
else ifeq ($(HARDWARE_MOTHERBOARD),1141)
# VORON
# Duplicator i3 Plus
else ifeq ($(HARDWARE_MOTHERBOARD),1142)
# TRONXY V3 1.0
# VORON
else ifeq ($(HARDWARE_MOTHERBOARD),1143)
# Z-Bolt X Series
# TRONXY V3 1.0
else ifeq ($(HARDWARE_MOTHERBOARD),1144)
# TT OSCAR
# Z-Bolt X Series
else ifeq ($(HARDWARE_MOTHERBOARD),1145)
# Overlord/Overlord Pro
# TT OSCAR
else ifeq ($(HARDWARE_MOTHERBOARD),1146)
# ADIMLab Gantry v1
# Overlord/Overlord Pro
else ifeq ($(HARDWARE_MOTHERBOARD),1147)
# ADIMLab Gantry v2
# ADIMLab Gantry v1
else ifeq ($(HARDWARE_MOTHERBOARD),1148)
# BIQU Tango V1
# ADIMLab Gantry v2
else ifeq ($(HARDWARE_MOTHERBOARD),1149)
# MKS GEN L V2
# BIQU Tango V1
else ifeq ($(HARDWARE_MOTHERBOARD),1150)
# Copymaster 3D
# MKS GEN L V2
else ifeq ($(HARDWARE_MOTHERBOARD),1151)
# Ortur 4
# MKS GEN L V2.1
else ifeq ($(HARDWARE_MOTHERBOARD),1152)
# Tenlog D3 Hero
# Copymaster 3D
else ifeq ($(HARDWARE_MOTHERBOARD),1153)
# Ortur 4
else ifeq ($(HARDWARE_MOTHERBOARD),1154)
# Tenlog D3 Hero
else ifeq ($(HARDWARE_MOTHERBOARD),1155)
#
# RAMBo and derivatives
@ -694,7 +698,7 @@ ifeq ($(HARDWARE_VARIANT), Teensy)
LIB_CXXSRC += usb_api.cpp
else ifeq ($(HARDWARE_VARIANT), archim)
CDEFS += -DARDUINO_SAM_ARCHIM -DARDUINO_ARCH_SAM -D__SAM3X8E__ -DUSB_VID=0x27b1 -DUSB_PID=0x0001 -DUSBCON '-DUSB_MANUFACTURER="UltiMachine"' '-DUSB_PRODUCT="Archim"'
CDEFS += -DARDUINO_SAM_ARCHIM -DARDUINO_ARCH_SAM -D__SAM3X8E__ -DUSB_VID=0x27b1 -DUSB_PID=0x0001 -DUSBCON '-DUSB_MANUFACTURER="UltiMachine"' '-DUSB_PRODUCT_STRING="Archim"'
LIB_CXXSRC += variant.cpp IPAddress.cpp Reset.cpp RingBuffer.cpp Stream.cpp UARTClass.cpp USARTClass.cpp abi.cpp new.cpp watchdog.cpp CDC.cpp PluggableUSB.cpp USBCore.cpp
LIB_SRC += cortex_handlers.c iar_calls_sam3.c syscalls_sam3.c dtostrf.c itoa.c

40
Marlin/src/HAL/AVR/HAL.h
View File

@ -15,6 +15,7 @@
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
@ -81,54 +82,29 @@ typedef int8_t pin_t;
// Serial ports
#ifdef USBCON
#if ENABLED(BLUETOOTH)
#define MYSERIAL0 bluetoothSerial
#else
#define MYSERIAL0 Serial
#endif
#define NUM_SERIAL 1
#define MYSERIAL0 TERN(BLUETOOTH, bluetoothSerial, Serial)
#else
#if !WITHIN(SERIAL_PORT, -1, 3)
#error "SERIAL_PORT must be from -1 to 3. Please update your configuration."
#endif
#define MYSERIAL0 customizedSerial1
#ifdef SERIAL_PORT_2
#if !WITHIN(SERIAL_PORT_2, -1, 3)
#error "SERIAL_PORT_2 must be from -1 to 3. Please update your configuration."
#elif SERIAL_PORT_2 == SERIAL_PORT
#error "SERIAL_PORT_2 must be different than SERIAL_PORT. Please update your configuration."
#endif
#define MYSERIAL1 customizedSerial2
#define NUM_SERIAL 2
#else
#define NUM_SERIAL 1
#endif
#endif
#ifdef DGUS_SERIAL_PORT
#if !WITHIN(DGUS_SERIAL_PORT, -1, 3)
#error "DGUS_SERIAL_PORT must be from -1 to 3. Please update your configuration."
#elif DGUS_SERIAL_PORT == SERIAL_PORT
#error "DGUS_SERIAL_PORT must be different than SERIAL_PORT. Please update your configuration."
#elif defined(SERIAL_PORT_2) && DGUS_SERIAL_PORT == SERIAL_PORT_2
#error "DGUS_SERIAL_PORT must be different than SERIAL_PORT_2. Please update your configuration."
#ifdef LCD_SERIAL_PORT
#if !WITHIN(LCD_SERIAL_PORT, -1, 3)
#error "LCD_SERIAL_PORT must be from -1 to 3. Please update your configuration."
#endif
#define DGUS_SERIAL internalDgusSerial
#define DGUS_SERIAL_GET_TX_BUFFER_FREE DGUS_SERIAL.get_tx_buffer_free
#define LCD_SERIAL lcdSerial
#if HAS_DGUS_LCD
#define SERIAL_GET_TX_BUFFER_FREE() LCD_SERIAL.get_tx_buffer_free()
#endif
#ifdef ANYCUBIC_LCD_SERIAL_PORT
#if !WITHIN(ANYCUBIC_LCD_SERIAL_PORT, -1, 3)
#error "ANYCUBIC_LCD_SERIAL_PORT must be from -1 to 3. Please update your configuration."
#elif ANYCUBIC_LCD_SERIAL_PORT == SERIAL_PORT
#error "ANYCUBIC_LCD_SERIAL_PORT must be different than SERIAL_PORT. Please update your configuration."
#elif defined(SERIAL_PORT_2) && ANYCUBIC_LCD_SERIAL_PORT == SERIAL_PORT_2
#error "ANYCUBIC_LCD_SERIAL_PORT must be different than SERIAL_PORT_2. Please update your configuration."
#endif
#define ANYCUBIC_LCD_SERIAL anycubicLcdSerial
#endif
// ------------------------

66
Marlin/src/HAL/AVR/MarlinSerial.cpp
View File

@ -745,28 +745,41 @@
#endif
#endif // !USBCON && (UBRRH || UBRR0H || UBRR1H || UBRR2H || UBRR3H)
#ifdef MMU2_SERIAL_PORT
#ifdef INTERNAL_SERIAL_PORT
ISR(SERIAL_REGNAME(USART,INTERNAL_SERIAL_PORT,_RX_vect)) {
MarlinSerial<MarlinInternalSerialCfg<INTERNAL_SERIAL_PORT>>::store_rxd_char();
ISR(SERIAL_REGNAME(USART, MMU2_SERIAL_PORT, _RX_vect)) {
MarlinSerial<MMU2SerialCfg<MMU2_SERIAL_PORT>>::store_rxd_char();
}
ISR(SERIAL_REGNAME(USART,INTERNAL_SERIAL_PORT,_UDRE_vect)) {
MarlinSerial<MarlinInternalSerialCfg<INTERNAL_SERIAL_PORT>>::_tx_udr_empty_irq();
ISR(SERIAL_REGNAME(USART, MMU2_SERIAL_PORT, _UDRE_vect)) {
MarlinSerial<MMU2SerialCfg<MMU2_SERIAL_PORT>>::_tx_udr_empty_irq();
}
// Preinstantiate
template class MarlinSerial<MarlinInternalSerialCfg<INTERNAL_SERIAL_PORT>>;
template class MarlinSerial<MMU2SerialCfg<MMU2_SERIAL_PORT>>;
// Instantiate
MarlinSerial<MarlinInternalSerialCfg<INTERNAL_SERIAL_PORT>> internalSerial;
MarlinSerial<MMU2SerialCfg<MMU2_SERIAL_PORT>> mmuSerial;
#endif
#ifdef DGUS_SERIAL_PORT
#ifdef LCD_SERIAL_PORT
ISR(SERIAL_REGNAME(USART, LCD_SERIAL_PORT, _RX_vect)) {
MarlinSerial<LCDSerialCfg<LCD_SERIAL_PORT>>::store_rxd_char();
}
ISR(SERIAL_REGNAME(USART, LCD_SERIAL_PORT, _UDRE_vect)) {
MarlinSerial<LCDSerialCfg<LCD_SERIAL_PORT>>::_tx_udr_empty_irq();
}
// Preinstantiate
template class MarlinSerial<LCDSerialCfg<LCD_SERIAL_PORT>>;
// Instantiate
MarlinSerial<LCDSerialCfg<LCD_SERIAL_PORT>> lcdSerial;
#if HAS_DGUS_LCD
template<typename Cfg>
typename MarlinSerial<Cfg>::ring_buffer_pos_t MarlinSerial<Cfg>::get_tx_buffer_free() {
const ring_buffer_pos_t t = tx_buffer.tail, // next byte to send.
@ -775,40 +788,11 @@
if (ret < 0) ret += Cfg::TX_SIZE + 1;
return ret;
}
ISR(SERIAL_REGNAME(USART,DGUS_SERIAL_PORT,_RX_vect)) {
MarlinSerial<MarlinInternalSerialCfg<DGUS_SERIAL_PORT>>::store_rxd_char();
}
ISR(SERIAL_REGNAME(USART,DGUS_SERIAL_PORT,_UDRE_vect)) {
MarlinSerial<MarlinInternalSerialCfg<DGUS_SERIAL_PORT>>::_tx_udr_empty_irq();
}
// Preinstantiate
template class MarlinSerial<MarlinInternalSerialCfg<DGUS_SERIAL_PORT>>;
// Instantiate
MarlinSerial<MarlinInternalSerialCfg<DGUS_SERIAL_PORT>> internalDgusSerial;
#endif
#endif
#ifdef ANYCUBIC_LCD_SERIAL_PORT
ISR(SERIAL_REGNAME(USART,ANYCUBIC_LCD_SERIAL_PORT,_RX_vect)) {
MarlinSerial<AnycubicLcdSerialCfg<ANYCUBIC_LCD_SERIAL_PORT>>::store_rxd_char();
}
ISR(SERIAL_REGNAME(USART,ANYCUBIC_LCD_SERIAL_PORT,_UDRE_vect)) {
MarlinSerial<AnycubicLcdSerialCfg<ANYCUBIC_LCD_SERIAL_PORT>>::_tx_udr_empty_irq();
}
// Preinstantiate
template class MarlinSerial<AnycubicLcdSerialCfg<ANYCUBIC_LCD_SERIAL_PORT>>;
// Instantiate
MarlinSerial<AnycubicLcdSerialCfg<ANYCUBIC_LCD_SERIAL_PORT>> anycubicLcdSerial;
#endif
#endif // !USBCON && (UBRRH || UBRR0H || UBRR1H || UBRR2H || UBRR3H)
// For AT90USB targets use the UART for BT interfacing
#if defined(USBCON) && ENABLED(BLUETOOTH)

67
Marlin/src/HAL/AVR/MarlinSerial.h
View File

@ -48,11 +48,11 @@
// These are macros to build serial port register names for the selected SERIAL_PORT (C preprocessor
// requires two levels of indirection to expand macro values properly)
#define SERIAL_REGNAME(registerbase,number,suffix) SERIAL_REGNAME_INTERNAL(registerbase,number,suffix)
#define SERIAL_REGNAME(registerbase,number,suffix) _SERIAL_REGNAME(registerbase,number,suffix)
#if SERIAL_PORT == 0 && (!defined(UBRR0H) || !defined(UDR0)) // use un-numbered registers if necessary
#define SERIAL_REGNAME_INTERNAL(registerbase,number,suffix) registerbase##suffix
#define _SERIAL_REGNAME(registerbase,number,suffix) registerbase##suffix
#else
#define SERIAL_REGNAME_INTERNAL(registerbase,number,suffix) registerbase##number##suffix
#define _SERIAL_REGNAME(registerbase,number,suffix) registerbase##number##suffix
#endif
// Registers used by MarlinSerial class (expanded depending on selected serial port)
@ -217,10 +217,12 @@
static ring_buffer_pos_t available();
static void write(const uint8_t c);
static void flushTX();
#ifdef DGUS_SERIAL_PORT
#if HAS_DGUS_LCD
static ring_buffer_pos_t get_tx_buffer_free();
#endif
static inline bool emergency_parser_enabled() { return Cfg::EMERGENCYPARSER; }
FORCE_INLINE static uint8_t dropped() { return Cfg::DROPPED_RX ? rx_dropped_bytes : 0; }
FORCE_INLINE static uint8_t buffer_overruns() { return Cfg::RX_OVERRUNS ? rx_buffer_overruns : 0; }
FORCE_INLINE static uint8_t framing_errors() { return Cfg::RX_FRAMING_ERRORS ? rx_framing_errors : 0; }
@ -278,55 +280,50 @@
#endif // !USBCON
#ifdef INTERNAL_SERIAL_PORT
#ifdef MMU2_SERIAL_PORT
template <uint8_t serial>
struct MarlinInternalSerialCfg {
struct MMU2SerialCfg {
static constexpr int PORT = serial;
static constexpr bool XONOFF = false;
static constexpr bool EMERGENCYPARSER = false;
static constexpr bool DROPPED_RX = false;
static constexpr bool RX_FRAMING_ERRORS = false;
static constexpr bool MAX_RX_QUEUED = false;
static constexpr unsigned int RX_SIZE = 32;
static constexpr unsigned int TX_SIZE = 32;
static constexpr bool XONOFF = false;
static constexpr bool EMERGENCYPARSER = false;
static constexpr bool DROPPED_RX = false;
static constexpr bool RX_OVERRUNS = false;
static constexpr bool RX_FRAMING_ERRORS = false;
static constexpr bool MAX_RX_QUEUED = false;
};
extern MarlinSerial<MarlinInternalSerialCfg<INTERNAL_SERIAL_PORT>> internalSerial;
extern MarlinSerial<MMU2SerialCfg<MMU2_SERIAL_PORT>> mmuSerial;
#endif
#ifdef DGUS_SERIAL_PORT
#ifdef LCD_SERIAL_PORT
template <uint8_t serial>
struct MarlinInternalSerialCfg {
struct LCDSerialCfg {
static constexpr int PORT = serial;
static constexpr bool XONOFF = false;
static constexpr bool EMERGENCYPARSER = ENABLED(EMERGENCY_PARSER);
static constexpr bool DROPPED_RX = false;
static constexpr bool RX_FRAMING_ERRORS = false;
static constexpr bool MAX_RX_QUEUED = false;
#if HAS_DGUS_LCD
static constexpr unsigned int RX_SIZE = DGUS_RX_BUFFER_SIZE;
static constexpr unsigned int TX_SIZE = DGUS_TX_BUFFER_SIZE;
static constexpr bool XONOFF = false;
static constexpr bool EMERGENCYPARSER = false;
static constexpr bool DROPPED_RX = false;
static constexpr bool RX_OVERRUNS = BOTH(HAS_DGUS_LCD, DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS);
static constexpr bool RX_FRAMING_ERRORS = false;
static constexpr bool MAX_RX_QUEUED = false;
};
extern MarlinSerial<MarlinInternalSerialCfg<DGUS_SERIAL_PORT>> internalDgusSerial;
#endif
#ifdef ANYCUBIC_LCD_SERIAL_PORT
template <uint8_t serial>
struct AnycubicLcdSerialCfg {
static constexpr int PORT = serial;
static constexpr bool RX_OVERRUNS = ENABLED(SERIAL_STATS_RX_BUFFER_OVERRUNS);
#elif EITHER(ANYCUBIC_LCD_I3MEGA, ANYCUBIC_LCD_CHIRON)
static constexpr unsigned int RX_SIZE = 64;
static constexpr unsigned int TX_SIZE = 128;
static constexpr bool XONOFF = false;
static constexpr bool EMERGENCYPARSER = false;
static constexpr bool DROPPED_RX = false;
static constexpr bool RX_OVERRUNS = false;
static constexpr bool RX_FRAMING_ERRORS = false;
static constexpr bool MAX_RX_QUEUED = false;
#else
static constexpr unsigned int RX_SIZE = 64;
static constexpr unsigned int TX_SIZE = 128;
static constexpr bool RX_OVERRUNS = false
#endif
};
extern MarlinSerial<AnycubicLcdSerialCfg<ANYCUBIC_LCD_SERIAL_PORT>> anycubicLcdSerial;
extern MarlinSerial<LCDSerialCfg<LCD_SERIAL_PORT>> lcdSerial;
#endif
// Use the UART for Bluetooth in AT90USB configurations

1
Marlin/src/HAL/AVR/Servo.cpp
View File

@ -48,7 +48,6 @@
* readMicroseconds() - Get the last-written servo pulse width in microseconds.
* attached() - Return true if a servo is attached.
* detach() - Stop an attached servo from pulsing its i/o pin.
*
*/
#ifdef __AVR__

16
Marlin/src/HAL/AVR/fastio.h
View File

@ -29,11 +29,17 @@
#include <avr/io.h>
#define AVR_AT90USB1286_FAMILY (defined(__AVR_AT90USB1287__) || defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB1286P__) || defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB646P__) || defined(__AVR_AT90USB647__))
#define AVR_ATmega1284_FAMILY (defined(__AVR_ATmega644__) || defined(__AVR_ATmega644P__) || defined(__AVR_ATmega644PA__) || defined(__AVR_ATmega1284P__))
#define AVR_ATmega2560_FAMILY (defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__))
#define AVR_ATmega2561_FAMILY (defined(__AVR_ATmega1281__) || defined(__AVR_ATmega2561__))
#define AVR_ATmega328_FAMILY (defined(__AVR_ATmega168__) || defined(__AVR_ATmega328__) || defined(__AVR_ATmega328P__))
#if defined(__AVR_AT90USB1287__) || defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB1286P__) || defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB646P__) || defined(__AVR_AT90USB647__)
#define AVR_AT90USB1286_FAMILY 1
#elif defined(__AVR_ATmega644__) || defined(__AVR_ATmega644P__) || defined(__AVR_ATmega644PA__) || defined(__AVR_ATmega1284P__)
#define AVR_ATmega1284_FAMILY 1
#elif defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__)
#define AVR_ATmega2560_FAMILY 1
#elif defined(__AVR_ATmega1281__) || defined(__AVR_ATmega2561__)
#define AVR_ATmega2561_FAMILY 1
#elif defined(__AVR_ATmega168__) || defined(__AVR_ATmega328__) || defined(__AVR_ATmega328P__)
#define AVR_ATmega328_FAMILY 1
#endif
/**
* Include Ports and Functions

4
Marlin/src/HAL/AVR/pinsDebug.h
View File

@ -26,7 +26,9 @@
#define NUMBER_PINS_TOTAL NUM_DIGITAL_PINS
#define AVR_ATmega2560_FAMILY_PLUS_70 MB(BQ_ZUM_MEGA_3D, MIGHTYBOARD_REVE, MINIRAMBO, SCOOVO_X9H)
#if MB(BQ_ZUM_MEGA_3D, MIGHTYBOARD_REVE, MINIRAMBO, SCOOVO_X9H, TRIGORILLA_14)
#define AVR_ATmega2560_FAMILY_PLUS_70 1
#endif
#if AVR_AT90USB1286_FAMILY

7
Marlin/src/HAL/AVR/pinsDebug_plus_70.h
View File

@ -22,15 +22,12 @@
* Structures for 2560 family boards that use more than 70 pins
*/
#if MB(BQ_ZUM_MEGA_3D, MINIRAMBO, SCOOVO_X9H, TRIGORILLA_14)
#undef NUM_DIGITAL_PINS
#if MB(BQ_ZUM_MEGA_3D)
#define NUM_DIGITAL_PINS 85
#elif MB(MIGHTYBOARD_REVE)
#undef NUM_DIGITAL_PINS
#define NUM_DIGITAL_PINS 80
#elif MB(MINIRAMBO)
#define NUM_DIGITAL_PINS 85
#elif MB(SCOOVO_X9H)
#define NUM_DIGITAL_PINS 85
#endif
#define PA 1

1
Marlin/src/HAL/AVR/timers.h
View File

@ -15,6 +15,7 @@
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once

4
Marlin/src/HAL/AVR/u8g_com_HAL_AVR_sw_spi.cpp
View File

@ -57,7 +57,7 @@
#include "../../inc/MarlinConfigPre.h"
#if HAS_GRAPHICAL_LCD
#if HAS_MARLINUI_U8GLIB
#include "../shared/Marduino.h"
#include "../shared/Delay.h"
@ -189,5 +189,5 @@ uint8_t u8g_com_HAL_AVR_sw_sp_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void
return 1;
}
#endif // HAS_GRAPHICAL_LCD
#endif // HAS_MARLINUI_U8GLIB
#endif // ARDUINO_ARCH_SAM

53
Marlin/src/HAL/DUE/HAL.h
View File

@ -38,59 +38,36 @@
#include <stdint.h>
#define _MSERIAL(X) Serial##X
#define MSERIAL(X) _MSERIAL(X)
#define Serial0 Serial
// Define MYSERIAL0/1 before MarlinSerial includes!
#if SERIAL_PORT == -1 || ENABLED(EMERGENCY_PARSER)
#define MYSERIAL0 customizedSerial1
#elif SERIAL_PORT == 0
#define MYSERIAL0 Serial
#elif SERIAL_PORT == 1
#define MYSERIAL0 Serial1
#elif SERIAL_PORT == 2
#define MYSERIAL0 Serial2
#elif SERIAL_PORT == 3
#define MYSERIAL0 Serial3
#elif WITHIN(SERIAL_PORT, 0, 3)
#define MYSERIAL0 MSERIAL(SERIAL_PORT)
#else
#error "The required SERIAL_PORT must be from -1 to 3. Please update your configuration."
#endif
#ifdef SERIAL_PORT_2
#if SERIAL_PORT_2 == SERIAL_PORT
#error "SERIAL_PORT_2 must be different from SERIAL_PORT. Please update your configuration."
#elif SERIAL_PORT_2 == -1 || ENABLED(EMERGENCY_PARSER)
#if SERIAL_PORT_2 == -1 || ENABLED(EMERGENCY_PARSER)
#define MYSERIAL1 customizedSerial2
#elif SERIAL_PORT_2 == 0
#define MYSERIAL1 Serial
#elif SERIAL_PORT_2 == 1
#define MYSERIAL1 Serial1
#elif SERIAL_PORT_2 == 2
#define MYSERIAL1 Serial2
#elif SERIAL_PORT_2 == 3
#define MYSERIAL1 Serial3
#elif WITHIN(SERIAL_PORT_2, 0, 3)
#define MYSERIAL1 MSERIAL(SERIAL_PORT_2)
#else
#error "SERIAL_PORT_2 must be from -1 to 3. Please update your configuration."
#endif
#define NUM_SERIAL 2
#else
#define NUM_SERIAL 1
#endif
#ifdef DGUS_SERIAL_PORT
#if DGUS_SERIAL_PORT == SERIAL_PORT
#error "DGUS_SERIAL_PORT must be different from SERIAL_PORT. Please update your configuration."
#elif defined(SERIAL_PORT_2) && DGUS_SERIAL_PORT == SERIAL_PORT_2
#error "DGUS_SERIAL_PORT must be different than SERIAL_PORT_2. Please update your configuration."
#elif DGUS_SERIAL_PORT == -1
#define DGUS_SERIAL internalDgusSerial
#elif DGUS_SERIAL_PORT == 0
#define DGUS_SERIAL Serial
#elif DGUS_SERIAL_PORT == 1
#define DGUS_SERIAL Serial1
#elif DGUS_SERIAL_PORT == 2
#define DGUS_SERIAL Serial2
#elif DGUS_SERIAL_PORT == 3
#define DGUS_SERIAL Serial3
#ifdef LCD_SERIAL_PORT
#if LCD_SERIAL_PORT == -1
#define LCD_SERIAL lcdSerial
#elif WITHIN(LCD_SERIAL_PORT, 0, 3)
#define LCD_SERIAL MSERIAL(LCD_SERIAL_PORT)
#else
#error "DGUS_SERIAL_PORT must be from -1 to 3. Please update your configuration."
#error "LCD_SERIAL_PORT must be from -1 to 3. Please update your configuration."
#endif
#endif

3
Marlin/src/HAL/DUE/HAL_SPI.cpp
View File

@ -595,7 +595,7 @@
SPI_Enable(SPI0);
SET_OUTPUT(DAC0_SYNC);
#if EXTRUDERS > 1
#if HAS_MULTI_EXTRUDER
SET_OUTPUT(DAC1_SYNC);
WRITE(DAC1_SYNC, HIGH);
#endif
@ -759,7 +759,6 @@
*
* All of the above can be avoided by defining FORCE_SOFT_SPI to force the
* display to use software SPI.
*
*/
void spiInit(uint8_t spiRate=6) { // Default to slowest rate if not specified)

2
Marlin/src/HAL/DUE/MarlinSerial.h
View File

@ -122,6 +122,8 @@ public:
static void write(const uint8_t c);
static void flushTX();
static inline bool emergency_parser_enabled() { return Cfg::EMERGENCYPARSER; }
FORCE_INLINE static uint8_t dropped() { return Cfg::DROPPED_RX ? rx_dropped_bytes : 0; }
FORCE_INLINE static uint8_t buffer_overruns() { return Cfg::RX_OVERRUNS ? rx_buffer_overruns : 0; }
FORCE_INLINE static uint8_t framing_errors() { return Cfg::RX_FRAMING_ERRORS ? rx_framing_errors : 0; }

5
Marlin/src/HAL/DUE/dogm/u8g_com_HAL_DUE_shared_hw_spi.cpp
View File

@ -52,14 +52,13 @@
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
* ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
*/
#ifdef __SAM3X8E__
#include "../../../inc/MarlinConfigPre.h"
#if HAS_GRAPHICAL_LCD
#if HAS_MARLINUI_U8GLIB
#include <U8glib.h>
@ -145,6 +144,6 @@ uint8_t u8g_com_HAL_DUE_shared_hw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_va
return 1;
}
#endif // HAS_GRAPHICAL_LCD
#endif // HAS_MARLINUI_U8GLIB
#endif // __SAM3X8E__

4
Marlin/src/HAL/DUE/dogm/u8g_com_HAL_DUE_sw_spi.cpp
View File

@ -57,7 +57,7 @@
#include "../../../inc/MarlinConfigPre.h"
#if HAS_GRAPHICAL_LCD && DISABLED(U8GLIB_ST7920)
#if HAS_MARLINUI_U8GLIB && DISABLED(U8GLIB_ST7920)
#undef SPI_SPEED
#define SPI_SPEED 2 // About 2 MHz
@ -144,5 +144,5 @@ uint8_t u8g_com_HAL_DUE_sw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void
return 1;
}
#endif // HAS_GRAPHICAL_LCD && !U8GLIB_ST7920
#endif // HAS_MARLINUI_U8GLIB && !U8GLIB_ST7920
#endif // ARDUINO_ARCH_SAM

4
Marlin/src/HAL/DUE/dogm/u8g_com_HAL_DUE_sw_spi_shared.cpp
View File

@ -57,7 +57,7 @@
#include "../../../inc/MarlinConfigPre.h"
#if HAS_GRAPHICAL_LCD
#if HAS_MARLINUI_U8GLIB
#include "../../shared/Delay.h"
@ -108,5 +108,5 @@ void u8g_spiSend_sw_DUE_mode_3(uint8_t val) { // 3.5MHz
}
}
#endif // HAS_GRAPHICAL_LCD
#endif // HAS_MARLINUI_U8GLIB
#endif // ARDUINO_ARCH_SAM

1
Marlin/src/HAL/DUE/eeprom_flash.cpp
View File

@ -53,7 +53,6 @@
* per page. We can't emulate EE endurance with FLASH for all
* bytes, but we can emulate endurance for a given percent of
* bytes.
*
*/
//#define EE_EMU_DEBUG

1
Marlin/src/HAL/DUE/pinsDebug.h
View File

@ -179,5 +179,4 @@ void pwm_details(int32_t pin) {
* ----------------+--------
* ID | PB11
* VBOF | PB10
*
*/

3
Marlin/src/HAL/DUE/usb/compiler.h
View File

@ -1112,8 +1112,7 @@ static inline uint32_t convert_byte_array_to_32_bit(uint8_t *data)
uint8_t u8[8];
}long_addr;
uint8_t index;
for (index = 0; index < 4; index++)
{
for (index = 0; index < 4; index++) {
long_addr.u8[index] = *data++;
}
return long_addr.u32;

4
Marlin/src/HAL/ESP32/HAL.h
View File

@ -15,6 +15,7 @@
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
@ -58,9 +59,6 @@ extern portMUX_TYPE spinlock;
#else
#define MYSERIAL1 webSocketSerial
#endif
#define NUM_SERIAL 2
#else
#define NUM_SERIAL 1
#endif
#define CRITICAL_SECTION_START() portENTER_CRITICAL(&spinlock)

3
Marlin/src/HAL/ESP32/WebSocketSerial.cpp
View File

@ -139,9 +139,8 @@ size_t WebSocketSerial::write(const uint8_t c) {
size_t WebSocketSerial::write(const uint8_t* buffer, size_t size) {
size_t written = 0;
for(size_t i = 0; i < size; i++) {
for (size_t i = 0; i < size; i++)
written += write(buffer[i]);
}
return written;
}

1
Marlin/src/HAL/ESP32/ota.h
View File

@ -15,6 +15,7 @@
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once

6
Marlin/src/HAL/HAL.h
View File

@ -25,6 +25,12 @@
#include HAL_PATH(.,HAL.h)
#ifdef SERIAL_PORT_2
#define NUM_SERIAL 2
#else
#define NUM_SERIAL 1
#endif
#define HAL_ADC_RANGE _BV(HAL_ADC_RESOLUTION)
#ifndef I2C_ADDRESS

1
Marlin/src/HAL/LINUX/HAL.h
View File

@ -62,7 +62,6 @@ uint8_t _getc();
extern HalSerial usb_serial;
#define MYSERIAL0 usb_serial
#define NUM_SERIAL 1
#define ST7920_DELAY_1 DELAY_NS(600)
#define ST7920_DELAY_2 DELAY_NS(750)

2
Marlin/src/HAL/LINUX/include/serial.h
View File

@ -33,7 +33,6 @@
* Generic RingBuffer
* T type of the buffer array
* S size of the buffer (must be power of 2)
*
*/
template <typename T, uint32_t S> class RingBuffer {
public:
@ -79,6 +78,7 @@ public:
#if ENABLED(EMERGENCY_PARSER)
EmergencyParser::State emergency_state;
static inline bool emergency_parser_enabled() { return true; }
#endif
HalSerial() { host_connected = true; }

2
Marlin/src/HAL/LINUX/main.cpp
View File

@ -107,7 +107,7 @@ int main() {
std::thread write_serial (write_serial_thread);
std::thread read_serial (read_serial_thread);
#if NUM_SERIAL > 0
#ifdef MYSERIAL0
MYSERIAL0.begin(BAUDRATE);
SERIAL_ECHOLNPGM("x86_64 Initialized");
SERIAL_FLUSHTX();

1
Marlin/src/HAL/LINUX/servo_private.h
View File

@ -45,7 +45,6 @@
* Version 2 Copyright (c) 2009 Michael Margolis. All right reserved.
*
* The only modification was to update/delete macros to match the LPC176x.
*
*/
#include <stdint.h>

2
Marlin/src/HAL/LINUX/spi_pins.h
View File

@ -24,7 +24,7 @@
#include "../../core/macros.h"
#include "../../inc/MarlinConfigPre.h"
#if BOTH(HAS_GRAPHICAL_LCD, SDSUPPORT) && (LCD_PINS_D4 == SCK_PIN || LCD_PINS_ENABLE == MOSI_PIN || DOGLCD_SCK == SCK_PIN || DOGLCD_MOSI == MOSI_PIN)
#if BOTH(HAS_MARLINUI_U8GLIB, SDSUPPORT) && (LCD_PINS_D4 == SCK_PIN || LCD_PINS_ENABLE == MOSI_PIN || DOGLCD_SCK == SCK_PIN || DOGLCD_MOSI == MOSI_PIN)
#define LPC_SOFTWARE_SPI // If the SD card and LCD adapter share the same SPI pins, then software SPI is currently
// needed due to the speed and mode required for communicating with each device being different.
// This requirement can be removed if the SPI access to these devices is updated to use

53
Marlin/src/HAL/LPC1768/HAL.h
View File

@ -63,58 +63,35 @@ extern "C" volatile uint32_t _millis;
#define ST7920_DELAY_3 DELAY_NS(750)
#endif
#define _MSERIAL(X) MSerial##X
#define MSERIAL(X) _MSERIAL(X)
#define MSerial0 MSerial
#if SERIAL_PORT == -1
#define MYSERIAL0 UsbSerial
#elif SERIAL_PORT == 0
#define MYSERIAL0 MSerial
#elif SERIAL_PORT == 1
#define MYSERIAL0 MSerial1
#elif SERIAL_PORT == 2
#define MYSERIAL0 MSerial2
#elif SERIAL_PORT == 3
#define MYSERIAL0 MSerial3
#elif WITHIN(SERIAL_PORT, 0, 3)
#define MYSERIAL0 MSERIAL(SERIAL_PORT)
#else
#error "SERIAL_PORT must be from -1 to 3. Please update your configuration."
#endif
#ifdef SERIAL_PORT_2
#if SERIAL_PORT_2 == SERIAL_PORT
#error "SERIAL_PORT_2 must be different than SERIAL_PORT. Please update your configuration."
#elif SERIAL_PORT_2 == -1
#if SERIAL_PORT_2 == -1
#define MYSERIAL1 UsbSerial
#elif SERIAL_PORT_2 == 0
#define MYSERIAL1 MSerial
#elif SERIAL_PORT_2 == 1
#define MYSERIAL1 MSerial1
#elif SERIAL_PORT_2 == 2
#define MYSERIAL1 MSerial2
#elif SERIAL_PORT_2 == 3
#define MYSERIAL1 MSerial3
#elif WITHIN(SERIAL_PORT_2, 0, 3)
#define MYSERIAL1 MSERIAL(SERIAL_PORT_2)
#else
#error "SERIAL_PORT_2 must be from -1 to 3. Please update your configuration."
#endif
#define NUM_SERIAL 2
#else
#define NUM_SERIAL 1
#endif
#ifdef DGUS_SERIAL_PORT
#if DGUS_SERIAL_PORT == SERIAL_PORT
#error "DGUS_SERIAL_PORT must be different than SERIAL_PORT. Please update your configuration."
#elif defined(SERIAL_PORT_2) && DGUS_SERIAL_PORT == SERIAL_PORT_2
#error "DGUS_SERIAL_PORT must be different than SERIAL_PORT_2. Please update your configuration."
#elif DGUS_SERIAL_PORT == -1
#define DGUS_SERIAL UsbSerial
#elif DGUS_SERIAL_PORT == 0
#define DGUS_SERIAL MSerial
#elif DGUS_SERIAL_PORT == 1
#define DGUS_SERIAL MSerial1
#elif DGUS_SERIAL_PORT == 2
#define DGUS_SERIAL MSerial2
#elif DGUS_SERIAL_PORT == 3
#define DGUS_SERIAL MSerial3
#ifdef LCD_SERIAL_PORT
#if LCD_SERIAL_PORT == -1
#define LCD_SERIAL UsbSerial
#elif WITHIN(LCD_SERIAL_PORT, 0, 3)
#define LCD_SERIAL MSERIAL(LCD_SERIAL_PORT)
#else
#error "DGUS_SERIAL_PORT must be from -1 to 3. Please update your configuration."
#error "LCD_SERIAL_PORT must be from -1 to 3. Please update your configuration."
#endif
#endif

185
Marlin/src/HAL/LPC1768/HAL_SPI.cpp
View File

@ -41,8 +41,8 @@
* WRITE nor digitalWrite when the hardware SPI module within the LPC17xx is
* active. If any of these pins are shared then the software SPI must be used.
*
* A more sophisticated hardware SPI can be found at the following link. This
* implementation has not been fully debugged.
* A more sophisticated hardware SPI can be found at the following link.
* This implementation has not been fully debugged.
* https://github.com/MarlinFirmware/Marlin/tree/071c7a78f27078fd4aee9a3ef365fcf5e143531e
*/
@ -100,72 +100,25 @@
#else
// decide which HW SPI device to use
#ifndef LPC_HW_SPI_DEV
#if (SCK_PIN == P0_07 && MISO_PIN == P0_08 && MOSI_PIN == P0_09)
#define LPC_HW_SPI_DEV 1
#else
#if (SCK_PIN == P0_15 && MISO_PIN == P0_17 && MOSI_PIN == P0_18)
#define LPC_HW_SPI_DEV 0
#else
#error "Invalid pins selected for hardware SPI"
#endif
#endif
#endif
#if LPC_HW_SPI_DEV == 0
#define LPC_SSPn LPC_SSP0
#else
#define LPC_SSPn LPC_SSP1
#endif
void spiBegin() { // setup SCK, MOSI & MISO pins for SSP0
PINSEL_CFG_Type PinCfg; // data structure to hold init values
PinCfg.Funcnum = 2;
PinCfg.OpenDrain = 0;
PinCfg.Pinmode = 0;
PinCfg.Pinnum = LPC176x::pin_bit(SCK_PIN);
PinCfg.Portnum = LPC176x::pin_port(SCK_PIN);
PINSEL_ConfigPin(&PinCfg);
SET_OUTPUT(SCK_PIN);
PinCfg.Pinnum = LPC176x::pin_bit(MISO_PIN);
PinCfg.Portnum = LPC176x::pin_port(MISO_PIN);
PINSEL_ConfigPin(&PinCfg);
SET_INPUT(MISO_PIN);
PinCfg.Pinnum = LPC176x::pin_bit(MOSI_PIN);
PinCfg.Portnum = LPC176x::pin_port(MOSI_PIN);
PINSEL_ConfigPin(&PinCfg);
SET_OUTPUT(MOSI_PIN);
// divide PCLK by 2 for SSP0
CLKPWR_SetPCLKDiv(LPC_HW_SPI_DEV == 0 ? CLKPWR_PCLKSEL_SSP0 : CLKPWR_PCLKSEL_SSP1, CLKPWR_PCLKSEL_CCLK_DIV_2);
spiInit(0);
SSP_Cmd(LPC_SSPn, ENABLE); // start SSP running
spiInit(SPI_SPEED);
}
void spiInit(uint8_t spiRate) {
// table to convert Marlin spiRates (0-5 plus default) into bit rates
uint32_t Marlin_speed[7]; // CPSR is always 2
Marlin_speed[0] = 8333333; //(SCR: 2) desired: 8,000,000 actual: 8,333,333 +4.2% SPI_FULL_SPEED
Marlin_speed[1] = 4166667; //(SCR: 5) desired: 4,000,000 actual: 4,166,667 +4.2% SPI_HALF_SPEED
Marlin_speed[2] = 2083333; //(SCR: 11) desired: 2,000,000 actual: 2,083,333 +4.2% SPI_QUARTER_SPEED
Marlin_speed[3] = 1000000; //(SCR: 24) desired: 1,000,000 actual: 1,000,000 SPI_EIGHTH_SPEED
Marlin_speed[4] = 500000; //(SCR: 49) desired: 500,000 actual: 500,000 SPI_SPEED_5
Marlin_speed[5] = 250000; //(SCR: 99) desired: 250,000 actual: 250,000 SPI_SPEED_6
Marlin_speed[6] = 125000; //(SCR:199) desired: 125,000 actual: 125,000 Default from HAL.h
// setup for SPI mode
SSP_CFG_Type HW_SPI_init; // data structure to hold init values
SSP_ConfigStructInit(&HW_SPI_init); // set values for SPI mode
HW_SPI_init.ClockRate = Marlin_speed[_MIN(spiRate, 6)]; // put in the specified bit rate
HW_SPI_init.Mode |= SSP_CR1_SSP_EN;
SSP_Init(LPC_SSPn, &HW_SPI_init); // puts the values into the proper bits in the SSP0 registers
#if MISO_PIN == BOARD_SPI1_MISO_PIN
SPI.setModule(1);
#elif MISO_PIN == BOARD_SPI2_MISO_PIN
SPI.setModule(2);
#endif
SPI.setDataSize(DATA_SIZE_8BIT);
SPI.setDataMode(SPI_MODE0);
SPI.setClock(SPISettings::spiRate2Clock(spiRate));
SPI.begin();
}
static uint8_t doio(uint8_t b) {
/* send and receive a single byte */
SSP_SendData(LPC_SSPn, b & 0x00FF);
while (SSP_GetStatus(LPC_SSPn, SSP_STAT_BUSY)); // wait for it to finish
return SSP_ReceiveData(LPC_SSPn) & 0x00FF;
return SPI.transfer(b & 0x00FF) & 0x00FF;
}
void spiSend(uint8_t b) { doio(b); }
@ -217,63 +170,74 @@ static inline void waitSpiTxEnd(LPC_SSP_TypeDef *spi_d) {
while (SSP_GetStatus(spi_d, SSP_STAT_BUSY) == SET) { /* nada */ } // wait until BSY=0
}
// Retain the pin init state of the SPI, to avoid init more than once,
// even if more instances of SPIClass exist
static bool spiInitialised[BOARD_NR_SPI] = { false };
SPIClass::SPIClass(uint8_t device) {
// Init things specific to each SPI device
// clock divider setup is a bit of hack, and needs to be improved at a later date.
PINSEL_CFG_Type PinCfg; // data structure to hold init values
#if BOARD_NR_SPI >= 1
_settings[0].spi_d = LPC_SSP0;
_settings[0].dataMode = SPI_MODE0;
_settings[0].dataSize = DATA_SIZE_8BIT;
_settings[0].clock = SPI_CLOCK_MAX;
//_settings[0].clockDivider = determine_baud_rate(_settings[0].spi_d, _settings[0].clock);
PinCfg.Funcnum = 2;
PinCfg.OpenDrain = 0;
PinCfg.Pinmode = 0;
PinCfg.Pinnum = LPC176x::pin_bit(BOARD_SPI1_SCK_PIN);
PinCfg.Portnum = LPC176x::pin_port(BOARD_SPI1_SCK_PIN);
PINSEL_ConfigPin(&PinCfg);
SET_OUTPUT(BOARD_SPI1_SCK_PIN);
PinCfg.Pinnum = LPC176x::pin_bit(BOARD_SPI1_MISO_PIN);
PinCfg.Portnum = LPC176x::pin_port(BOARD_SPI1_MISO_PIN);
PINSEL_ConfigPin(&PinCfg);
SET_INPUT(BOARD_SPI1_MISO_PIN);
PinCfg.Pinnum = LPC176x::pin_bit(BOARD_SPI1_MOSI_PIN);
PinCfg.Portnum = LPC176x::pin_port(BOARD_SPI1_MOSI_PIN);
PINSEL_ConfigPin(&PinCfg);
SET_OUTPUT(BOARD_SPI1_MOSI_PIN);
#endif
#if BOARD_NR_SPI >= 2
_settings[1].spi_d = LPC_SSP1;
_settings[1].dataMode = SPI_MODE0;
_settings[1].dataSize = DATA_SIZE_8BIT;
_settings[1].clock = SPI_CLOCK_MAX;
//_settings[1].clockDivider = determine_baud_rate(_settings[1].spi_d, _settings[1].clock);
PinCfg.Funcnum = 2;
PinCfg.OpenDrain = 0;
PinCfg.Pinmode = 0;
PinCfg.Pinnum = LPC176x::pin_bit(BOARD_SPI2_SCK_PIN);
PinCfg.Portnum = LPC176x::pin_port(BOARD_SPI2_SCK_PIN);
PINSEL_ConfigPin(&PinCfg);
SET_OUTPUT(BOARD_SPI2_SCK_PIN);
PinCfg.Pinnum = LPC176x::pin_bit(BOARD_SPI2_MISO_PIN);
PinCfg.Portnum = LPC176x::pin_port(BOARD_SPI2_MISO_PIN);
PINSEL_ConfigPin(&PinCfg);
SET_INPUT(BOARD_SPI2_MISO_PIN);
PinCfg.Pinnum = LPC176x::pin_bit(BOARD_SPI2_MOSI_PIN);
PinCfg.Portnum = LPC176x::pin_port(BOARD_SPI2_MOSI_PIN);
PINSEL_ConfigPin(&PinCfg);
SET_OUTPUT(BOARD_SPI2_MOSI_PIN);
#endif
setModule(device);
/* Initialize GPDMA controller */
// Init the GPDMA controller
// TODO: call once in the constructor? or each time?
GPDMA_Init();
}
void SPIClass::begin() {
// Init the SPI pins in the first begin call
if ((_currentSetting->spi_d == LPC_SSP0 && spiInitialised[0] == false) ||
(_currentSetting->spi_d == LPC_SSP1 && spiInitialised[1] == false)) {
pin_t sck, miso, mosi;
if (_currentSetting->spi_d == LPC_SSP0) {
sck = BOARD_SPI1_SCK_PIN;
miso = BOARD_SPI1_MISO_PIN;
mosi = BOARD_SPI1_MOSI_PIN;
spiInitialised[0] = true;
}
else if (_currentSetting->spi_d == LPC_SSP1) {
sck = BOARD_SPI2_SCK_PIN;
miso = BOARD_SPI2_MISO_PIN;
mosi = BOARD_SPI2_MOSI_PIN;
spiInitialised[1] = true;
}
PINSEL_CFG_Type PinCfg; // data structure to hold init values
PinCfg.Funcnum = 2;
PinCfg.OpenDrain = 0;
PinCfg.Pinmode = 0;
PinCfg.Pinnum = LPC176x::pin_bit(sck);
PinCfg.Portnum = LPC176x::pin_port(sck);
PINSEL_ConfigPin(&PinCfg);
SET_OUTPUT(sck);
PinCfg.Pinnum = LPC176x::pin_bit(miso);
PinCfg.Portnum = LPC176x::pin_port(miso);
PINSEL_ConfigPin(&PinCfg);
SET_INPUT(miso);
PinCfg.Pinnum = LPC176x::pin_bit(mosi);
PinCfg.Portnum = LPC176x::pin_port(mosi);
PINSEL_ConfigPin(&PinCfg);
SET_OUTPUT(mosi);
}
updateSettings();
SSP_Cmd(_currentSetting->spi_d, ENABLE); // start SSP running
}
@ -287,7 +251,7 @@ void SPIClass::beginTransaction(const SPISettings &cfg) {
}
uint8_t SPIClass::transfer(const uint16_t b) {
/* send and receive a single byte */
// Send and receive a single byte
SSP_ReceiveData(_currentSetting->spi_d); // read any previous data
SSP_SendData(_currentSetting->spi_d, b);
waitSpiTxEnd(_currentSetting->spi_d); // wait for it to finish
@ -295,8 +259,7 @@ uint8_t SPIClass::transfer(const uint16_t b) {
}
uint16_t SPIClass::transfer16(const uint16_t data) {
return (transfer((data >> 8) & 0xFF) << 8)
| (transfer(data & 0xFF) & 0xFF);
return (transfer((data >> 8) & 0xFF) << 8) | (transfer(data & 0xFF) & 0xFF);
}
void SPIClass::end() {
@ -320,7 +283,7 @@ void SPIClass::dmaSend(void *buf, uint16_t length, bool minc) {
// Destination memory - Not used
GPDMACfg.DstMemAddr = 0;
// Transfer size
GPDMACfg.TransferSize = (minc ? length : 1);
GPDMACfg.TransferSize = length;
// Transfer width
GPDMACfg.TransferWidth = (_currentSetting->dataSize == DATA_SIZE_16BIT) ? GPDMA_WIDTH_HALFWORD : GPDMA_WIDTH_BYTE;
// Transfer type
@ -335,27 +298,25 @@ void SPIClass::dmaSend(void *buf, uint16_t length, bool minc) {
// Enable dma on SPI
SSP_DMACmd(_currentSetting->spi_d, SSP_DMA_TX, ENABLE);
// if minc=false, I'm repeating the same byte 'length' times, as I could not find yet how do GPDMA without memory increment
do {
// Only increase memory if minc is true
GPDMACfg.MemoryIncrease = (minc ? GPDMA_DMACCxControl_SI : 0);
// Setup channel with given parameter
GPDMA_Setup(&GPDMACfg);
// enabled dma
// Enable DMA
GPDMA_ChannelCmd(0, ENABLE);
// wait data transfer
while (!GPDMA_IntGetStatus(GPDMA_STAT_INTTC, 0) && !GPDMA_IntGetStatus(GPDMA_STAT_INTERR, 0)) { }
// Wait for data transfer
while (!GPDMA_IntGetStatus(GPDMA_STAT_RAWINTTC, 0) && !GPDMA_IntGetStatus(GPDMA_STAT_RAWINTERR, 0)) { }
// clear err and int
// Clear err and int
GPDMA_ClearIntPending (GPDMA_STATCLR_INTTC, 0);
GPDMA_ClearIntPending (GPDMA_STATCLR_INTERR, 0);
// dma disable
// Disable DMA
GPDMA_ChannelCmd(0, DISABLE);
--length;
} while (!minc && length > 0);
waitSpiTxEnd(_currentSetting->spi_d);
SSP_DMACmd(_currentSetting->spi_d, SSP_DMA_TX, DISABLE);
@ -382,7 +343,7 @@ void SPIClass::setBitOrder(uint8_t bitOrder) {
}
void SPIClass::setDataMode(uint8_t dataMode) {
_currentSetting->dataSize = dataMode;
_currentSetting->dataMode = dataMode;
}
void SPIClass::setDataSize(uint32_t ds) {

8
Marlin/src/HAL/LPC1768/MarlinSerial.cpp
View File

@ -24,28 +24,28 @@
#include "../../inc/MarlinConfigPre.h"
#include "MarlinSerial.h"
#if (defined(SERIAL_PORT) && SERIAL_PORT == 0) || (defined(SERIAL_PORT_2) && SERIAL_PORT_2 == 0) || (defined(DGUS_SERIAL_PORT) && DGUS_SERIAL_PORT == 0)
#if USING_SERIAL_0
MarlinSerial MSerial(LPC_UART0);
extern "C" void UART0_IRQHandler() {
MSerial.IRQHandler();
}
#endif
#if SERIAL_PORT == 1 || SERIAL_PORT_2 == 1 || DGUS_SERIAL_PORT == 1
#if USING_SERIAL_1
MarlinSerial MSerial1((LPC_UART_TypeDef *) LPC_UART1);
extern "C" void UART1_IRQHandler() {
MSerial1.IRQHandler();
}
#endif
#if SERIAL_PORT == 2 || SERIAL_PORT_2 == 2 || DGUS_SERIAL_PORT == 2
#if USING_SERIAL_2
MarlinSerial MSerial2(LPC_UART2);
extern "C" void UART2_IRQHandler() {
MSerial2.IRQHandler();
}
#endif
#if SERIAL_PORT == 3 || SERIAL_PORT_2 == 3 || DGUS_SERIAL_PORT == 3
#if USING_SERIAL_3
MarlinSerial MSerial3(LPC_UART3);
extern "C" void UART3_IRQHandler() {
MSerial3.IRQHandler();

1
Marlin/src/HAL/LPC1768/MarlinSerial.h
View File

@ -57,6 +57,7 @@ public:
}
EmergencyParser::State emergency_state;
static inline bool emergency_parser_enabled() { return true; }
#endif
};

1
Marlin/src/HAL/LPC1768/Servo.h
View File

@ -46,7 +46,6 @@
* Version 2 Copyright (c) 2009 Michael Margolis. All right reserved.
*
* The only modification was to update/delete macros to match the LPC176x.
*
*/
#include <Servo.h>

59
Marlin/src/HAL/LPC1768/inc/SanityCheck.h
View File

@ -24,7 +24,7 @@
#if PIO_PLATFORM_VERSION < 1001
#error "nxplpc-arduino-lpc176x package is out of date, Please update the PlatformIO platforms, frameworks and libraries. You may need to remove the platform and let it reinstall automatically."
#endif
#if PIO_FRAMEWORK_VERSION < 2002
#if PIO_FRAMEWORK_VERSION < 2005
#error "framework-arduino-lpc176x package is out of date, Please update the PlatformIO platforms, frameworks and libraries."
#endif
@ -89,7 +89,10 @@ static_assert(DISABLED(BAUD_RATE_GCODE), "BAUD_RATE_GCODE is not yet supported o
* Serial2 | P0_10 | P0_11 |
* Serial3 | P0_00 | P0_01 |
*/
#if (defined(SERIAL_PORT) && SERIAL_PORT == 0) || (defined(SERIAL_PORT_2) && SERIAL_PORT_2 == 0) || (defined(DGUS_SERIAL_PORT) && DGUS_SERIAL_PORT == 0)
#define ANY_TX(N,V...) DO(IS_TX##N,||,V)
#define ANY_RX(N,V...) DO(IS_RX##N,||,V)
#if USING_SERIAL_0
#define IS_TX0(P) (P == P0_02)
#define IS_RX0(P) (P == P0_03)
#if IS_TX0(TMC_SW_MISO) || IS_RX0(TMC_SW_MOSI)
@ -103,60 +106,67 @@ static_assert(DISABLED(BAUD_RATE_GCODE), "BAUD_RATE_GCODE is not yet supported o
#undef IS_RX0
#endif
#if SERIAL_PORT == 1 || SERIAL_PORT_2 == 1 || DGUS_SERIAL_PORT == 1
#if USING_SERIAL_1
#define IS_TX1(P) (P == P0_15)
#define IS_RX1(P) (P == P0_16)
#define _IS_TX1_1 IS_TX1
#define _IS_RX1_1 IS_RX1
#if IS_TX1(TMC_SW_SCK)
#error "Serial port pins (1) conflict with other pins!"
#elif HAS_SPI_LCD
#elif HAS_WIRED_LCD
#if IS_TX1(BTN_EN2) || IS_RX1(BTN_EN1)
#error "Serial port pins (1) conflict with Encoder Buttons!"
#elif IS_TX1(SCK_PIN) || IS_TX1(LCD_PINS_D4) || IS_TX1(DOGLCD_SCK) || IS_TX1(LCD_RESET_PIN) || IS_TX1(LCD_PINS_RS) || IS_TX1(SHIFT_CLK) \
|| IS_RX1(LCD_SDSS) || IS_RX1(LCD_PINS_RS) || IS_RX1(MISO_PIN) || IS_RX1(DOGLCD_A0) || IS_RX1(SS_PIN) || IS_RX1(LCD_SDSS) || IS_RX1(DOGLCD_CS) || IS_RX1(LCD_RESET_PIN) || IS_RX1(LCD_BACKLIGHT_PIN)
#elif ANY_TX(1, SCK_PIN, LCD_PINS_D4, DOGLCD_SCK, LCD_RESET_PIN, LCD_PINS_RS, SHIFT_CLK) \
|| ANY_RX(1, LCD_SDSS, LCD_PINS_RS, MISO_PIN, DOGLCD_A0, SS_PIN, LCD_SDSS, DOGLCD_CS, LCD_RESET_PIN, LCD_BACKLIGHT_PIN)
#error "Serial port pins (1) conflict with LCD pins!"
#endif
#endif
#undef IS_TX1
#undef IS_RX1
#undef _IS_TX1_1
#undef _IS_RX1_1
#endif
#if SERIAL_PORT == 2 || SERIAL_PORT_2 == 2 || DGUS_SERIAL_PORT == 2
#if USING_SERIAL_2
#define IS_TX2(P) (P == P0_10)
#define IS_RX2(P) (P == P0_11)
#if IS_TX2(X2_ENABLE_PIN) || IS_RX2(X2_DIR_PIN) || IS_RX2(X2_STEP_PIN) || (AXIS_HAS_SPI(X2) && IS_TX2(X2_CS_PIN))
#define _IS_TX2_1 IS_TX2
#define _IS_RX2_1 IS_RX2
#if IS_TX2(X2_ENABLE_PIN) || ANY_RX(2, X2_DIR_PIN, X2_STEP_PIN) || (AXIS_HAS_SPI(X2) && IS_TX2(X2_CS_PIN))
#error "Serial port pins (2) conflict with X2 pins!"
#elif IS_TX2(Y2_ENABLE_PIN) || IS_RX2(Y2_DIR_PIN) || IS_RX2(Y2_STEP_PIN) || (AXIS_HAS_SPI(Y2) && IS_TX2(Y2_CS_PIN))
#elif IS_TX2(Y2_ENABLE_PIN) || ANY_RX(2, Y2_DIR_PIN, Y2_STEP_PIN) || (AXIS_HAS_SPI(Y2) && IS_TX2(Y2_CS_PIN))
#error "Serial port pins (2) conflict with Y2 pins!"
#elif IS_TX2(Z2_ENABLE_PIN) || IS_RX2(Z2_DIR_PIN) || IS_RX2(Z2_STEP_PIN) || (AXIS_HAS_SPI(Z2) && IS_TX2(Z2_CS_PIN))
#elif IS_TX2(Z2_ENABLE_PIN) || ANY_RX(2, Z2_DIR_PIN, Z2_STEP_PIN) || (AXIS_HAS_SPI(Z2) && IS_TX2(Z2_CS_PIN))
#error "Serial port pins (2) conflict with Z2 pins!"
#elif IS_TX2(Z3_ENABLE_PIN) || IS_RX2(Z3_DIR_PIN) || IS_RX2(Z3_STEP_PIN) || (AXIS_HAS_SPI(Z3) && IS_TX2(Z3_CS_PIN))
#elif IS_TX2(Z3_ENABLE_PIN) || ANY_RX(2, Z3_DIR_PIN, Z3_STEP_PIN) || (AXIS_HAS_SPI(Z3) && IS_TX2(Z3_CS_PIN))
#error "Serial port pins (2) conflict with Z3 pins!"
#elif IS_TX2(Z4_ENABLE_PIN) || IS_RX2(Z4_DIR_PIN) || IS_RX2(Z4_STEP_PIN) || (AXIS_HAS_SPI(Z4) && IS_TX2(Z4_CS_PIN))
#elif IS_TX2(Z4_ENABLE_PIN) || ANY_RX(2, Z4_DIR_PIN, Z4_STEP_PIN) || (AXIS_HAS_SPI(Z4) && IS_TX2(Z4_CS_PIN))
#error "Serial port pins (2) conflict with Z4 pins!"
#elif IS_RX2(X_DIR_PIN) || IS_RX2(Y_DIR_PIN)
#elif ANY_RX(2, X_DIR_PIN, Y_DIR_PIN)
#error "Serial port pins (2) conflict with other pins!"
#elif Y_HOME_DIR < 0 && IS_TX2(Y_STOP_PIN)
#error "Serial port pins (2) conflict with Y endstop pin!"
#elif HAS_CUSTOM_PROBE_PIN && IS_TX2(Z_MIN_PROBE_PIN)
#error "Serial port pins (2) conflict with probe pin!"
#elif IS_TX2(X_ENABLE_PIN) || IS_RX2(X_DIR_PIN) || IS_TX2(Y_ENABLE_PIN) || IS_RX2(Y_DIR_PIN)
#elif ANY_TX(2, X_ENABLE_PIN, Y_ENABLE_PIN) || ANY_RX(2, X_DIR_PIN, Y_DIR_PIN)
#error "Serial port pins (2) conflict with X/Y stepper pins!"
#elif EXTRUDERS > 1 && (IS_TX2(E1_ENABLE_PIN) || (AXIS_HAS_SPI(E1) && IS_TX2(E1_CS_PIN)))
#elif HAS_MULTI_EXTRUDER && (IS_TX2(E1_ENABLE_PIN) || (AXIS_HAS_SPI(E1) && IS_TX2(E1_CS_PIN)))
#error "Serial port pins (2) conflict with E1 stepper pins!"
#elif EXTRUDERS && (IS_RX2(E0_DIR_PIN) || IS_RX2(E0_STEP_PIN))
#elif EXTRUDERS && ANY_RX(2, E0_DIR_PIN, E0_STEP_PIN)
#error "Serial port pins (2) conflict with E stepper pins!"
#endif
#undef IS_TX2
#undef IS_RX2
#undef _IS_TX2_1
#undef _IS_RX2_1
#endif
#if SERIAL_PORT == 3 || SERIAL_PORT_2 == 3 || DGUS_SERIAL_PORT == 3
#if USING_SERIAL_3
#define PIN_IS_TX3(P) (PIN_EXISTS(P) && P##_PIN == P0_00)
#define PIN_IS_RX3(P) (P##_PIN == P0_01)
#if PIN_IS_TX3(X_MIN) || PIN_IS_RX3(X_MAX)
#error "Serial port pins (3) conflict with X endstop pins!"
#elif PIN_IS_TX3(Y_SERIAL_TX) || PIN_IS_TX3(Y_SERIAL_RX) \
|| PIN_IS_RX3(X_SERIAL_TX) || PIN_IS_RX3(X_SERIAL_RX)
#elif PIN_IS_TX3(Y_SERIAL_TX) || PIN_IS_TX3(Y_SERIAL_RX) || PIN_IS_RX3(X_SERIAL_TX) || PIN_IS_RX3(X_SERIAL_RX)
#error "Serial port pins (3) conflict with X/Y axis UART pins!"
#elif PIN_IS_TX3(X2_DIR) || PIN_IS_RX3(X2_STEP)
#error "Serial port pins (3) conflict with X2 pins!"
@ -168,13 +178,16 @@ static_assert(DISABLED(BAUD_RATE_GCODE), "BAUD_RATE_GCODE is not yet supported o
#error "Serial port pins (3) conflict with Z3 pins!"
#elif PIN_IS_TX3(Z4_DIR) || PIN_IS_RX3(Z4_STEP)
#error "Serial port pins (3) conflict with Z4 pins!"
#elif EXTRUDERS > 1 && (PIN_IS_TX3(E1_DIR) || PIN_IS_RX3(E1_STEP))
#elif HAS_MULTI_EXTRUDER && (PIN_IS_TX3(E1_DIR) || PIN_IS_RX3(E1_STEP))
#error "Serial port pins (3) conflict with E1 pins!"
#endif
#undef PIN_IS_TX3
#undef PIN_IS_RX3
#endif
#undef ANY_TX
#undef ANY_RX
//
// Flag any i2c pin conflicts
//
@ -214,7 +227,7 @@ static_assert(DISABLED(BAUD_RATE_GCODE), "BAUD_RATE_GCODE is not yet supported o
#error "One or more i2c (1) pins overlaps with Z3 pins! Disable i2c peripherals."
#elif PIN_IS_SDA1(Z4_DIR) || PIN_IS_SCL1(Z4_STEP)
#error "One or more i2c (1) pins overlaps with Z4 pins! Disable i2c peripherals."
#elif EXTRUDERS > 1 && (PIN_IS_SDA1(E1_DIR) || PIN_IS_SCL1(E1_STEP))
#elif HAS_MULTI_EXTRUDER && (PIN_IS_SDA1(E1_DIR) || PIN_IS_SCL1(E1_STEP))
#error "One or more i2c (1) pins overlaps with E1 pins! Disable i2c peripherals."
#endif
#undef PIN_IS_SDA1
@ -240,9 +253,9 @@ static_assert(DISABLED(BAUD_RATE_GCODE), "BAUD_RATE_GCODE is not yet supported o
#error "i2c SDA2 overlaps with Z3 enable pin! Disable i2c peripherals."
#elif PIN_IS_SDA2(Z4_ENABLE)
#error "i2c SDA2 overlaps with Z4 enable pin! Disable i2c peripherals."
#elif EXTRUDERS > 1 && PIN_IS_SDA2(E1_ENABLE)
#elif HAS_MULTI_EXTRUDER && PIN_IS_SDA2(E1_ENABLE)
#error "i2c SDA2 overlaps with E1 enable pin! Disable i2c peripherals."
#elif EXTRUDERS > 1 && AXIS_HAS_SPI(E1) && PIN_IS_SDA2(E1_CS)
#elif HAS_MULTI_EXTRUDER && AXIS_HAS_SPI(E1) && PIN_IS_SDA2(E1_CS)
#error "i2c SDA2 overlaps with E1 CS pin! Disable i2c peripherals."
#elif EXTRUDERS && (PIN_IS_SDA2(E0_STEP) || PIN_IS_SDA2(E0_DIR))
#error "i2c SCL2 overlaps with E0 STEP/DIR pin! Disable i2c peripherals."

22
Marlin/src/HAL/LPC1768/include/SPI.h
View File

@ -61,7 +61,9 @@
class SPISettings {
public:
SPISettings(uint32_t speed, int, int) : spi_speed(speed) {};
SPISettings(uint32_t spiRate, int inBitOrder, int inDataMode) {
init_AlwaysInline(spiRate2Clock(spiRate), inBitOrder, inDataMode, DATA_SIZE_8BIT);
}
SPISettings(uint32_t inClock, uint8_t inBitOrder, uint8_t inDataMode, uint32_t inDataSize) {
if (__builtin_constant_p(inClock))
init_AlwaysInline(inClock, inBitOrder, inDataMode, inDataSize);
@ -72,7 +74,19 @@ public:
init_AlwaysInline(4000000, MSBFIRST, SPI_MODE0, DATA_SIZE_8BIT);
}
uint32_t spiRate() const { return spi_speed; }
//uint32_t spiRate() const { return spi_speed; }
static inline uint32_t spiRate2Clock(uint32_t spiRate) {
uint32_t Marlin_speed[7]; // CPSR is always 2
Marlin_speed[0] = 8333333; //(SCR: 2) desired: 8,000,000 actual: 8,333,333 +4.2% SPI_FULL_SPEED
Marlin_speed[1] = 4166667; //(SCR: 5) desired: 4,000,000 actual: 4,166,667 +4.2% SPI_HALF_SPEED
Marlin_speed[2] = 2083333; //(SCR: 11) desired: 2,000,000 actual: 2,083,333 +4.2% SPI_QUARTER_SPEED
Marlin_speed[3] = 1000000; //(SCR: 24) desired: 1,000,000 actual: 1,000,000 SPI_EIGHTH_SPEED
Marlin_speed[4] = 500000; //(SCR: 49) desired: 500,000 actual: 500,000 SPI_SPEED_5
Marlin_speed[5] = 250000; //(SCR: 99) desired: 250,000 actual: 250,000 SPI_SPEED_6
Marlin_speed[6] = 125000; //(SCR:199) desired: 125,000 actual: 125,000 Default from HAL.h
return Marlin_speed[spiRate > 6 ? 6 : spiRate];
}
private:
void init_MightInline(uint32_t inClock, uint8_t inBitOrder, uint8_t inDataMode, uint32_t inDataSize) {
@ -85,7 +99,7 @@ private:
dataSize = inDataSize;
}
uint32_t spi_speed;
//uint32_t spi_speed;
uint32_t clock;
uint32_t dataSize;
//uint32_t clockDivider;
@ -122,7 +136,7 @@ public:
void end();
void beginTransaction(const SPISettings&);
void endTransaction() {};
void endTransaction() {}
// Transfer using 1 "Data Size"
uint8_t transfer(uint16_t data);

2
Marlin/src/HAL/LPC1768/spi_pins.h
View File

@ -23,7 +23,7 @@
#include "../../core/macros.h"
#if BOTH(SDSUPPORT, HAS_GRAPHICAL_LCD) && (LCD_PINS_D4 == SCK_PIN || LCD_PINS_ENABLE == MOSI_PIN || DOGLCD_SCK == SCK_PIN || DOGLCD_MOSI == MOSI_PIN)
#if BOTH(SDSUPPORT, HAS_MARLINUI_U8GLIB) && (LCD_PINS_D4 == SCK_PIN || LCD_PINS_ENABLE == MOSI_PIN || DOGLCD_SCK == SCK_PIN || DOGLCD_MOSI == MOSI_PIN)
#define LPC_SOFTWARE_SPI // If the SD card and LCD adapter share the same SPI pins, then software SPI is currently
// needed due to the speed and mode required for communicating with each device being different.
// This requirement can be removed if the SPI access to these devices is updated to use

1
Marlin/src/HAL/LPC1768/tft/xpt2046.cpp
View File

@ -72,7 +72,6 @@ bool XPT2046::getRawPoint(int16_t *x, int16_t *y) {
if (!isTouched()) return false;
*x = getRawData(XPT2046_X);
*y = getRawData(XPT2046_Y);
SERIAL_ECHOLNPAIR("X: ", *x, ", Y: ", *y);
return isTouched();
}

1
Marlin/src/HAL/LPC1768/timers.h
View File

@ -21,7 +21,6 @@
#pragma once
/**
*
* HAL For LPC1768
*/

4
Marlin/src/HAL/LPC1768/u8g/u8g_com_HAL_LPC1768_hw_spi.cpp
View File

@ -57,7 +57,7 @@
#include "../../../inc/MarlinConfigPre.h"
#if HAS_GRAPHICAL_LCD
#if HAS_MARLINUI_U8GLIB
#include <U8glib.h>
#include "../../shared/HAL_SPI.h"
@ -124,6 +124,6 @@ uint8_t u8g_com_HAL_LPC1768_hw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val,
return 1;
}
#endif // HAS_GRAPHICAL_LCD
#endif // HAS_MARLINUI_U8GLIB
#endif // TARGET_LPC1768

4
Marlin/src/HAL/LPC1768/u8g/u8g_com_HAL_LPC1768_ssd_hw_i2c.cpp
View File

@ -77,7 +77,7 @@
#include "../../../inc/MarlinConfigPre.h"
#if HAS_GRAPHICAL_LCD
#if HAS_MARLINUI_U8GLIB
#include <U8glib.h>
@ -193,6 +193,6 @@ uint8_t u8g_com_HAL_LPC1768_ssd_hw_i2c_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_v
return 1;
}
#endif // HAS_GRAPHICAL_LCD
#endif // HAS_MARLINUI_U8GLIB
#endif // TARGET_LPC1768

4
Marlin/src/HAL/LPC1768/u8g/u8g_com_HAL_LPC1768_st7920_hw_spi.cpp
View File

@ -57,7 +57,7 @@
#include "../../../inc/MarlinConfigPre.h"
#if HAS_GRAPHICAL_LCD
#if HAS_MARLINUI_U8GLIB
#include <U8glib.h>
#include "../../shared/HAL_SPI.h"
@ -133,6 +133,6 @@ uint8_t u8g_com_HAL_LPC1768_ST7920_hw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t ar
return 1;
}
#endif // HAS_GRAPHICAL_LCD
#endif // HAS_MARLINUI_U8GLIB
#endif // TARGET_LPC1768

4
Marlin/src/HAL/LPC1768/u8g/u8g_com_HAL_LPC1768_sw_spi.cpp
View File

@ -57,7 +57,7 @@
#include "../../../inc/MarlinConfigPre.h"
#if HAS_GRAPHICAL_LCD && DISABLED(U8GLIB_ST7920)
#if HAS_MARLINUI_U8GLIB && DISABLED(U8GLIB_ST7920)
#include <SoftwareSPI.h>
@ -203,5 +203,5 @@ uint8_t u8g_com_HAL_LPC1768_sw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val,
return 1;
}
#endif // HAS_GRAPHICAL_LCD && !U8GLIB_ST7920
#endif // HAS_MARLINUI_U8GLIB && !U8GLIB_ST7920
#endif // TARGET_LPC1768

2
Marlin/src/HAL/LPC1768/usb_serial.cpp
View File

@ -26,7 +26,9 @@
#if ENABLED(EMERGENCY_PARSER)
#include "../../feature/e_parser.h"
EmergencyParser::State emergency_state;
bool CDC_RecvCallback(const char buffer) {
emergency_parser.update(emergency_state, buffer);
return true;

52
Marlin/src/HAL/SAMD51/HAL.h
View File

@ -35,58 +35,34 @@
// MYSERIAL0 required before MarlinSerial includes!
#define _MSERIAL(X) Serial##X
#define MSERIAL(X) _MSERIAL(INCREMENT(X))
#if SERIAL_PORT == -1
#define MYSERIAL0 Serial
#elif SERIAL_PORT == 0
#define MYSERIAL0 Serial1
#elif SERIAL_PORT == 1
#define MYSERIAL0 Serial2
#elif SERIAL_PORT == 2
#define MYSERIAL0 Serial3
#elif SERIAL_PORT == 3
#define MYSERIAL0 Serial4
#elif WITHIN(SERIAL_PORT, 0, 3)
#define MYSERIAL0 MSERIAL(SERIAL_PORT)
#else
#error "SERIAL_PORT must be from -1 to 3. Please update your configuration."
#endif
#ifdef SERIAL_PORT_2
#if SERIAL_PORT_2 == SERIAL_PORT
#error "SERIAL_PORT_2 must be different than SERIAL_PORT. Please update your configuration."
#elif SERIAL_PORT_2 == -1
#if SERIAL_PORT_2 == -1
#define MYSERIAL1 Serial
#elif SERIAL_PORT_2 == 0
#define MYSERIAL1 Serial1
#elif SERIAL_PORT_2 == 1
#define MYSERIAL1 Serial2
#elif SERIAL_PORT_2 == 2
#define MYSERIAL1 Serial3
#elif SERIAL_PORT_2 == 3
#define MYSERIAL1 Serial4
#elif WITHIN(SERIAL_PORT_2, 0, 3)
#define MYSERIAL1 MSERIAL(SERIAL_PORT_2)
#else
#error "SERIAL_PORT_2 must be from -1 to 3. Please update your configuration."
#endif
#define NUM_SERIAL 2
#else
#define NUM_SERIAL 1
#endif
#ifdef DGUS_SERIAL_PORT
#if DGUS_SERIAL_PORT == SERIAL_PORT
#error "DGUS_SERIAL_PORT must be different than SERIAL_PORT. Please update your configuration."
#elif defined(SERIAL_PORT_2) && DGUS_SERIAL_PORT == SERIAL_PORT_2
#error "DGUS_SERIAL_PORT must be different than SERIAL_PORT_2. Please update your configuration."
#elif DGUS_SERIAL_PORT == -1
#define DGUS_SERIAL Serial
#elif DGUS_SERIAL_PORT == 0
#define DGUS_SERIAL Serial1
#elif DGUS_SERIAL_PORT == 1
#define DGUS_SERIAL Serial2
#elif DGUS_SERIAL_PORT == 2
#define DGUS_SERIAL Serial3
#elif DGUS_SERIAL_PORT == 2
#define DGUS_SERIAL Serial4
#ifdef LCD_SERIAL_PORT
#if LCD_SERIAL_PORT == -1
#define LCD_SERIAL Serial
#elif WITHIN(LCD_SERIAL_PORT, 0, 3)
#define LCD_SERIAL MSERIAL(LCD_SERIAL_PORT)
#else
#error "DGUS_SERIAL_PORT must be from -1 to 3. Please update your configuration."
#error "LCD_SERIAL_PORT must be from -1 to 3. Please update your configuration."
#endif
#endif

1
Marlin/src/HAL/SAMD51/QSPIFlash.h
View File

@ -24,7 +24,6 @@
* THE SOFTWARE.
*
* Derived from Adafruit_SPIFlash class with no SdFat references
*
*/
#pragma once

1
Marlin/src/HAL/SAMD51/pinsDebug.h
View File

@ -150,5 +150,4 @@ void pwm_details(int32_t pin) {
* 93 | PA10 | QSPI: IO2
* 94 | PA11 | QSPI: IO3
* 95 | PB31 | SD: DETECT
*
*/

81
Marlin/src/HAL/STM32/HAL.h
View File

@ -43,83 +43,40 @@
// ------------------------
// Defines
// ------------------------
#define _MSERIAL(X) MSerial##X
#define MSERIAL(X) _MSERIAL(X)
#if SERIAL_PORT == 0
#error "SERIAL_PORT cannot be 0. (Port 0 does not exist.) Please update your configuration."
#elif SERIAL_PORT == -1
#if SERIAL_PORT == -1
#define MYSERIAL0 SerialUSB
#elif SERIAL_PORT == 1
#define MYSERIAL0 MSerial1
#elif SERIAL_PORT == 2
#define MYSERIAL0 MSerial2
#elif SERIAL_PORT == 3
#define MYSERIAL0 MSerial3
#elif SERIAL_PORT == 4
#define MYSERIAL0 MSerial4
#elif SERIAL_PORT == 5
#define MYSERIAL0 MSerial5
#elif SERIAL_PORT == 6
#define MYSERIAL0 MSerial6
#elif WITHIN(SERIAL_PORT, 1, 6)
#define MYSERIAL0 MSERIAL(SERIAL_PORT)
#else
#error "SERIAL_PORT must be from -1 to 6. Please update your configuration."
#error "SERIAL_PORT must be -1 or from 1 to 6. Please update your configuration."
#endif
#ifdef SERIAL_PORT_2
#define NUM_SERIAL 2
#if SERIAL_PORT_2 == 0
#error "SERIAL_PORT_2 cannot be 0. (Port 0 does not exist.) Please update your configuration."
#elif SERIAL_PORT_2 == SERIAL_PORT
#error "SERIAL_PORT_2 must be different than SERIAL_PORT. Please update your configuration."
#elif SERIAL_PORT_2 == -1
#if SERIAL_PORT_2 == -1
#define MYSERIAL1 SerialUSB
#elif SERIAL_PORT_2 == 1
#define MYSERIAL1 MSerial1
#elif SERIAL_PORT_2 == 2
#define MYSERIAL1 MSerial2
#elif SERIAL_PORT_2 == 3
#define MYSERIAL1 MSerial3
#elif SERIAL_PORT_2 == 4
#define MYSERIAL1 MSerial4
#elif SERIAL_PORT_2 == 5
#define MYSERIAL1 MSerial5
#elif SERIAL_PORT_2 == 6
#define MYSERIAL1 MSerial6
#elif WITHIN(SERIAL_PORT_2, 1, 6)
#define MYSERIAL1 MSERIAL(SERIAL_PORT_2)
#else
#error "SERIAL_PORT_2 must be from -1 to 6. Please update your configuration."
#error "SERIAL_PORT_2 must be -1 or from 1 to 6. Please update your configuration."
#endif
#else
#define NUM_SERIAL 1
#endif
#ifdef LCD_SERIAL_PORT
#if LCD_SERIAL_PORT == -1
#define LCD_SERIAL SerialUSB
#elif WITHIN(LCD_SERIAL_PORT, 1, 6)
#define LCD_SERIAL MSERIAL(LCD_SERIAL_PORT)
#else
#error "LCD_SERIAL_PORT must be -1 or from 1 to 6. Please update your configuration."
#endif
#if HAS_DGUS_LCD
#if DGUS_SERIAL_PORT == 0
#error "DGUS_SERIAL_PORT cannot be 0. (Port 0 does not exist.) Please update your configuration."
#elif DGUS_SERIAL_PORT == SERIAL_PORT
#error "DGUS_SERIAL_PORT must be different than SERIAL_PORT. Please update your configuration."
#elif defined(SERIAL_PORT_2) && DGUS_SERIAL_PORT == SERIAL_PORT_2
#error "DGUS_SERIAL_PORT must be different than SERIAL_PORT_2. Please update your configuration."
#elif DGUS_SERIAL_PORT == -1
#define DGUS_SERIAL SerialUSB
#elif DGUS_SERIAL_PORT == 1
#define DGUS_SERIAL MSerial1
#elif DGUS_SERIAL_PORT == 2
#define DGUS_SERIAL MSerial2
#elif DGUS_SERIAL_PORT == 3
#define DGUS_SERIAL MSerial3
#elif DGUS_SERIAL_PORT == 4
#define DGUS_SERIAL MSerial4
#elif DGUS_SERIAL_PORT == 5
#define DGUS_SERIAL MSerial5
#elif DGUS_SERIAL_PORT == 6
#define DGUS_SERIAL MSerial6
#else
#error "DGUS_SERIAL_PORT must be from -1 to 6. Please update your configuration."
#define SERIAL_GET_TX_BUFFER_FREE() LCD_SERIAL.availableForWrite()
#endif
#define DGUS_SERIAL_GET_TX_BUFFER_FREE DGUS_SERIAL.availableForWrite
#endif
/**
* TODO: review this to return 1 for pins that are not analog input
*/

10
Marlin/src/HAL/STM32/MarlinSerial.cpp
View File

@ -49,16 +49,14 @@
DECLARE_SERIAL_PORT_EXP(SERIAL_PORT_2)
#endif
#if defined(DGUS_SERIAL_PORT) && DGUS_SERIAL_PORT >= 0
DECLARE_SERIAL_PORT_EXP(DGUS_SERIAL_PORT)
#if defined(LCD_SERIAL_PORT) && LCD_SERIAL_PORT >= 0
DECLARE_SERIAL_PORT_EXP(LCD_SERIAL_PORT)
#endif
void MarlinSerial::begin(unsigned long baud, uint8_t config) {
HardwareSerial::begin(baud, config);
// replace the IRQ callback with the one we have defined
#if ENABLED(EMERGENCY_PARSER)
_serial.rx_callback = _rx_callback;
#endif
// Replace the IRQ callback with the one we have defined
TERN_(EMERGENCY_PARSER, _serial.rx_callback = _rx_callback);
}
// This function is Copyright (c) 2006 Nicholas Zambetti.

4
Marlin/src/HAL/STM32/MarlinSerial.h
View File

@ -35,6 +35,10 @@ public:
#endif
{ }
#if ENABLED(EMERGENCY_PARSER)
static inline bool emergency_parser_enabled() { return true; }
#endif
void begin(unsigned long baud, uint8_t config);
inline void begin(unsigned long baud) { begin(baud, SERIAL_8N1); }

396
Marlin/src/HAL/STM32/SoftwareSerial.cpp
View File

@ -1,396 +0,0 @@
/*
* SoftwareSerial.cpp (formerly NewSoftSerial.cpp)
*
* Multi-instance software serial library for Arduino/Wiring
* -- Interrupt-driven receive and other improvements by ladyada
* <https://ladyada.net>
* -- Tuning, circular buffer, derivation from class Print/Stream,
* multi-instance support, porting to 8MHz processors,
* various optimizations, PROGMEM delay tables, inverse logic and
* direct port writing by Mikal Hart <http://www.arduiniana.org>
* -- Pin change interrupt macros by Paul Stoffregen <https://www.pjrc.com>
* -- 20MHz processor support by Garrett Mace <http://www.macetech.com>
* -- ATmega1280/2560 support by Brett Hagman <https://www.roguerobotics.com>
* -- STM32 support by Armin van der Togt
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*
* The latest version of this library can always be found at
* http://arduiniana.org.
*/
//
// Includes
//
#if defined(PLATFORMIO) && defined(ARDUINO_ARCH_STM32) && !defined(STM32GENERIC)
#include "../../inc/MarlinConfig.h"
#include "SoftwareSerial.h"
#define OVERSAMPLE 3 // in RX, Timer will generate interruption OVERSAMPLE time during a bit. Thus OVERSAMPLE ticks in a bit. (interrupt not synchonized with edge).
// defined in bit-periods
#define HALFDUPLEX_SWITCH_DELAY 5
// It's best to define TIMER_SERIAL in variant.h. If not defined, we choose one here
// The order is based on (lack of) features and compare channels, we choose the simplest available
// because we only need an update interrupt
#if !defined(TIMER_SERIAL)
#if defined(TIM18_BASE)
#define TIMER_SERIAL TIM18
#elif defined(TIM7_BASE)
#define TIMER_SERIAL TIM7
#elif defined(TIM6_BASE)
#define TIMER_SERIAL TIM6
#elif defined(TIM22_BASE)
#define TIMER_SERIAL TIM22
#elif defined(TIM21_BASE)
#define TIMER_SERIAL TIM21
#elif defined(TIM17_BASE)
#define TIMER_SERIAL TIM17
#elif defined(TIM16_BASE)
#define TIMER_SERIAL TIM16
#elif defined(TIM15_BASE)
#define TIMER_SERIAL TIM15
#elif defined(TIM14_BASE)
#define TIMER_SERIAL TIM14
#elif defined(TIM13_BASE)
#define TIMER_SERIAL TIM13
#elif defined(TIM11_BASE)
#define TIMER_SERIAL TIM11
#elif defined(TIM10_BASE)
#define TIMER_SERIAL TIM10
#elif defined(TIM12_BASE)
#define TIMER_SERIAL TIM12
#elif defined(TIM19_BASE)
#define TIMER_SERIAL TIM19
#elif defined(TIM9_BASE)
#define TIMER_SERIAL TIM9
#elif defined(TIM5_BASE)
#define TIMER_SERIAL TIM5
#elif defined(TIM4_BASE)
#define TIMER_SERIAL TIM4
#elif defined(TIM3_BASE)
#define TIMER_SERIAL TIM3
#elif defined(TIM2_BASE)
#define TIMER_SERIAL TIM2
#elif defined(TIM20_BASE)
#define TIMER_SERIAL TIM20
#elif defined(TIM8_BASE)
#define TIMER_SERIAL TIM8
#elif defined(TIM1_BASE)
#define TIMER_SERIAL TIM1
#else
#error No suitable timer found for SoftwareSerial, define TIMER_SERIAL in variant.h
#endif
#endif
//
// Statics
//
HardwareTimer SoftwareSerial::timer(TIMER_SERIAL);
const IRQn_Type SoftwareSerial::timer_interrupt_number = static_cast<IRQn_Type>(getTimerUpIrq(TIMER_SERIAL));
uint32_t SoftwareSerial::timer_interrupt_priority = NVIC_EncodePriority(NVIC_GetPriorityGrouping(), TIM_IRQ_PRIO, TIM_IRQ_SUBPRIO);
SoftwareSerial *SoftwareSerial::active_listener = nullptr;
SoftwareSerial *volatile SoftwareSerial::active_out = nullptr;
SoftwareSerial *volatile SoftwareSerial::active_in = nullptr;
int32_t SoftwareSerial::tx_tick_cnt = 0; // OVERSAMPLE ticks needed for a bit
int32_t volatile SoftwareSerial::rx_tick_cnt = 0; // OVERSAMPLE ticks needed for a bit
uint32_t SoftwareSerial::tx_buffer = 0;
int32_t SoftwareSerial::tx_bit_cnt = 0;
uint32_t SoftwareSerial::rx_buffer = 0;
int32_t SoftwareSerial::rx_bit_cnt = -1; // rx_bit_cnt = -1 : waiting for start bit
uint32_t SoftwareSerial::cur_speed = 0;
void SoftwareSerial::setInterruptPriority(uint32_t preemptPriority, uint32_t subPriority) {
timer_interrupt_priority = NVIC_EncodePriority(NVIC_GetPriorityGrouping(), preemptPriority, subPriority);
}
//
// Private methods
//
void SoftwareSerial::setSpeed(uint32_t speed) {
if (speed != cur_speed) {
timer.pause();
if (speed != 0) {
// Disable the timer
uint32_t clock_rate, cmp_value;
// Get timer clock
clock_rate = timer.getTimerClkFreq();
int pre = 1;
// Calculate prescale an compare value
do {
cmp_value = clock_rate / (speed * OVERSAMPLE);
if (cmp_value >= UINT16_MAX) {
clock_rate /= 2;
pre *= 2;
}
} while (cmp_value >= UINT16_MAX);
timer.setPrescaleFactor(pre);
timer.setOverflow(cmp_value);
timer.setCount(0);
timer.attachInterrupt(&handleInterrupt);
timer.resume();
NVIC_SetPriority(timer_interrupt_number, timer_interrupt_priority);
}
else
timer.detachInterrupt();
cur_speed = speed;
}
}
// This function sets the current object as the "listening"
// one and returns true if it replaces another
bool SoftwareSerial::listen() {
if (active_listener != this) {
// wait for any transmit to complete as we may change speed
while (active_out);
active_listener->stopListening();
rx_tick_cnt = 1; // 1 : next interrupt will decrease rx_tick_cnt to 0 which means RX pin level will be considered.
rx_bit_cnt = -1; // rx_bit_cnt = -1 : waiting for start bit
setSpeed(_speed);
active_listener = this;
if (!_half_duplex) active_in = this;
return true;
}
return false;
}
// Stop listening. Returns true if we were actually listening.
bool SoftwareSerial::stopListening() {
if (active_listener == this) {
// wait for any output to complete
while (active_out);
if (_half_duplex) setRXTX(false);
active_listener = nullptr;
active_in = nullptr;
// turn off ints
setSpeed(0);
return true;
}
return false;
}
inline void SoftwareSerial::setTX() {
if (_inverse_logic)
LL_GPIO_ResetOutputPin(_transmitPinPort, _transmitPinNumber);
else
LL_GPIO_SetOutputPin(_transmitPinPort, _transmitPinNumber);
pinMode(_transmitPin, OUTPUT);
}
inline void SoftwareSerial::setRX() {
pinMode(_receivePin, _inverse_logic ? INPUT_PULLDOWN : INPUT_PULLUP); // pullup for normal logic!
}
inline void SoftwareSerial::setRXTX(bool input) {
if (_half_duplex) {
if (input) {
if (active_in != this) {
setRX();
rx_bit_cnt = -1; // rx_bit_cnt = -1 : waiting for start bit
rx_tick_cnt = 2; // 2 : next interrupt will be discarded. 2 interrupts required to consider RX pin level
active_in = this;
}
}
else {
if (active_in == this) {
setTX();
active_in = nullptr;
}
}
}
}
inline void SoftwareSerial::send() {
if (--tx_tick_cnt <= 0) { // if tx_tick_cnt > 0 interrupt is discarded. Only when tx_tick_cnt reaches 0 is TX pin set.
if (tx_bit_cnt++ < 10) { // tx_bit_cnt < 10 transmission is not finished (10 = 1 start +8 bits + 1 stop)
// Send data (including start and stop bits)
if (tx_buffer & 1)
LL_GPIO_SetOutputPin(_transmitPinPort, _transmitPinNumber);
else
LL_GPIO_ResetOutputPin(_transmitPinPort, _transmitPinNumber);
tx_buffer >>= 1;
tx_tick_cnt = OVERSAMPLE; // Wait OVERSAMPLE ticks to send next bit
}
else { // Transmission finished
tx_tick_cnt = 1;
if (_output_pending) {
active_out = nullptr;
// In half-duplex mode wait HALFDUPLEX_SWITCH_DELAY bit-periods after the byte has
// been transmitted before allowing the switch to RX mode
}
else if (tx_bit_cnt > 10 + OVERSAMPLE * HALFDUPLEX_SWITCH_DELAY) {
if (_half_duplex && active_listener == this) setRXTX(true);
active_out = nullptr;
}
}
}
}
//
// The receive routine called by the interrupt handler
//
inline void SoftwareSerial::recv() {
if (--rx_tick_cnt <= 0) { // if rx_tick_cnt > 0 interrupt is discarded. Only when rx_tick_cnt reaches 0 is RX pin considered
bool inbit = LL_GPIO_IsInputPinSet(_receivePinPort, _receivePinNumber) ^ _inverse_logic;
if (rx_bit_cnt == -1) { // rx_bit_cnt = -1 : waiting for start bit
if (!inbit) {
// got start bit
rx_bit_cnt = 0; // rx_bit_cnt == 0 : start bit received
rx_tick_cnt = OVERSAMPLE + 1; // Wait 1 bit (OVERSAMPLE ticks) + 1 tick in order to sample RX pin in the middle of the edge (and not too close to the edge)
rx_buffer = 0;
}
else
rx_tick_cnt = 1; // Waiting for start bit, but wrong level. Wait for next Interrupt to check RX pin level
}
else if (rx_bit_cnt >= 8) { // rx_bit_cnt >= 8 : waiting for stop bit
if (inbit) {
// Stop-bit read complete. Add to buffer.
uint8_t next = (_receive_buffer_tail + 1) % _SS_MAX_RX_BUFF;
if (next != _receive_buffer_head) {
// save new data in buffer: tail points to byte destination
_receive_buffer[_receive_buffer_tail] = rx_buffer; // save new byte
_receive_buffer_tail = next;
}
else // rx_bit_cnt = x with x = [0..7] correspond to new bit x received
_buffer_overflow = true;
}
// Full trame received. Restart waiting for start bit at next interrupt
rx_tick_cnt = 1;
rx_bit_cnt = -1;
}
else {
// data bits
rx_buffer >>= 1;
if (inbit) rx_buffer |= 0x80;
rx_bit_cnt++; // Prepare for next bit
rx_tick_cnt = OVERSAMPLE; // Wait OVERSAMPLE ticks before sampling next bit
}
}
}
//
// Interrupt handling
//
/* static */
inline void SoftwareSerial::handleInterrupt(HardwareTimer*) {
if (active_in) active_in->recv();
if (active_out) active_out->send();
}
//
// Constructor
//
SoftwareSerial::SoftwareSerial(uint16_t receivePin, uint16_t transmitPin, bool inverse_logic /* = false */) :
_receivePin(receivePin),
_transmitPin(transmitPin),
_receivePinPort(digitalPinToPort(receivePin)),
_receivePinNumber(STM_LL_GPIO_PIN(digitalPinToPinName(receivePin))),
_transmitPinPort(digitalPinToPort(transmitPin)),
_transmitPinNumber(STM_LL_GPIO_PIN(digitalPinToPinName(transmitPin))),
_speed(0),
_buffer_overflow(false),
_inverse_logic(inverse_logic),
_half_duplex(receivePin == transmitPin),
_output_pending(0),
_receive_buffer_tail(0),
_receive_buffer_head(0)
{
if ((receivePin < NUM_DIGITAL_PINS) || (transmitPin < NUM_DIGITAL_PINS)) {
/* Enable GPIO clock for tx and rx pin*/
set_GPIO_Port_Clock(STM_PORT(digitalPinToPinName(transmitPin)));
set_GPIO_Port_Clock(STM_PORT(digitalPinToPinName(receivePin)));
}
else
_Error_Handler("ERROR: invalid pin number\n", -1);
}
//
// Destructor
//
SoftwareSerial::~SoftwareSerial() { end(); }
//
// Public methods
//
void SoftwareSerial::begin(long speed) {
#ifdef FORCE_BAUD_RATE
speed = FORCE_BAUD_RATE;
#endif
_speed = speed;
if (!_half_duplex) {
setTX();
setRX();
listen();
}
else
setTX();
}
void SoftwareSerial::end() {
stopListening();
}
// Read data from buffer
int SoftwareSerial::read() {
// Empty buffer?
if (_receive_buffer_head == _receive_buffer_tail) return -1;
// Read from "head"
uint8_t d = _receive_buffer[_receive_buffer_head]; // grab next byte
_receive_buffer_head = (_receive_buffer_head + 1) % _SS_MAX_RX_BUFF;
return d;
}
int SoftwareSerial::available() {
return (_receive_buffer_tail + _SS_MAX_RX_BUFF - _receive_buffer_head) % _SS_MAX_RX_BUFF;
}
size_t SoftwareSerial::write(uint8_t b) {
// wait for previous transmit to complete
_output_pending = 1;
while (active_out) { /* nada */ }
// add start and stop bits.
tx_buffer = b << 1 | 0x200;
if (_inverse_logic) tx_buffer = ~tx_buffer;
tx_bit_cnt = 0;
tx_tick_cnt = OVERSAMPLE;
setSpeed(_speed);
if (_half_duplex) setRXTX(false);
_output_pending = 0;
// make us active
active_out = this;
return 1;
}
void SoftwareSerial::flush() {
noInterrupts();
_receive_buffer_head = _receive_buffer_tail = 0;
interrupts();
}
int SoftwareSerial::peek() {
// Empty buffer?
if (_receive_buffer_head == _receive_buffer_tail) return -1;
// Read from "head"
return _receive_buffer[_receive_buffer_head];
}
#endif // ARDUINO_ARCH_STM32 && !STM32GENERIC

114
Marlin/src/HAL/STM32/SoftwareSerial.h
View File

@ -1,114 +0,0 @@
/**
* SoftwareSerial.h (formerly NewSoftSerial.h)
*
* Multi-instance software serial library for Arduino/Wiring
* -- Interrupt-driven receive and other improvements by ladyada
* (https://ladyada.net)
* -- Tuning, circular buffer, derivation from class Print/Stream,
* multi-instance support, porting to 8MHz processors,
* various optimizations, PROGMEM delay tables, inverse logic and
* direct port writing by Mikal Hart (http://www.arduiniana.org)
* -- Pin change interrupt macros by Paul Stoffregen (https://www.pjrc.com)
* -- 20MHz processor support by Garrett Mace (http://www.macetech.com)
* -- ATmega1280/2560 support by Brett Hagman (https://www.roguerobotics.com/)
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*
* The latest version of this library can always be found at
* http://arduiniana.org.
*/
#pragma once
#include <Arduino.h>
/******************************************************************************
* Definitions
******************************************************************************/
#define _SS_MAX_RX_BUFF 64 // RX buffer size
class SoftwareSerial : public Stream {
private:
// per object data
uint16_t _receivePin;
uint16_t _transmitPin;
GPIO_TypeDef *_receivePinPort;
uint32_t _receivePinNumber;
GPIO_TypeDef *_transmitPinPort;
uint32_t _transmitPinNumber;
uint32_t _speed;
uint16_t _buffer_overflow: 1;
uint16_t _inverse_logic: 1;
uint16_t _half_duplex: 1;
uint16_t _output_pending: 1;
unsigned char _receive_buffer[_SS_MAX_RX_BUFF];
volatile uint8_t _receive_buffer_tail;
volatile uint8_t _receive_buffer_head;
uint32_t delta_start = 0;
// static data
static HardwareTimer timer;
static const IRQn_Type timer_interrupt_number;
static uint32_t timer_interrupt_priority;
static SoftwareSerial *active_listener;
static SoftwareSerial *volatile active_out;
static SoftwareSerial *volatile active_in;
static int32_t tx_tick_cnt;
static volatile int32_t rx_tick_cnt;
static uint32_t tx_buffer;
static int32_t tx_bit_cnt;
static uint32_t rx_buffer;
static int32_t rx_bit_cnt;
static uint32_t cur_speed;
// private methods
void send();
void recv();
void setTX();
void setRX();
void setSpeed(uint32_t speed);
void setRXTX(bool input);
static void handleInterrupt(HardwareTimer *timer);
public:
// public methods
SoftwareSerial(uint16_t receivePin, uint16_t transmitPin, bool inverse_logic=false);
virtual ~SoftwareSerial();
void begin(long speed);
bool listen();
void end();
bool isListening() { return active_listener == this; }
bool stopListening();
bool overflow() {
bool ret = _buffer_overflow;
if (ret) _buffer_overflow = false;
return ret;
}
int peek();
virtual size_t write(uint8_t byte);
virtual int read();
virtual int available();
virtual void flush();
operator bool() { return true; }
static void setInterruptPriority(uint32_t preemptPriority, uint32_t subPriority);
using Print::write;
};

2
Marlin/src/HAL/STM32/pinsDebug_STM32GENERIC.h
View File

@ -98,7 +98,7 @@ static inline void pwm_details(const pin_t pin) {
timer_dev * const tdev = PIN_MAP[pin].timer_device;
const uint8_t channel = PIN_MAP[pin].timer_channel;
const char num = (
#if defined(STM32_HIGH_DENSITY) || defined(STM32_XL_DENSITY)
#if EITHER(STM32_HIGH_DENSITY, STM32_XL_DENSITY)
tdev == &timer8 ? '8' :
tdev == &timer5 ? '5' :
#endif

120
Marlin/src/HAL/STM32/timers.cpp
View File

@ -110,7 +110,6 @@
// ------------------------
HardwareTimer *timer_instance[NUM_HARDWARE_TIMERS] = { NULL };
bool timer_enabled[NUM_HARDWARE_TIMERS] = { false };
// ------------------------
// Public functions
@ -135,6 +134,7 @@ void HAL_timer_start(const uint8_t timer_num, const uint32_t frequency) {
* which changes the prescaler when an IRQ frequency change is needed
* (for example when steppers are turned on)
*/
timer_instance[timer_num]->setPrescaleFactor(STEPPER_TIMER_PRESCALE); //the -1 is done internally
timer_instance[timer_num]->setOverflow(_MIN(hal_timer_t(HAL_TIMER_TYPE_MAX), (HAL_TIMER_RATE) / (STEPPER_TIMER_PRESCALE) /* /frequency */), TICK_FORMAT);
break;
@ -145,15 +145,13 @@ void HAL_timer_start(const uint8_t timer_num, const uint32_t frequency) {
break;
}
// Disable preload. Leaving it default-enabled can cause the timer to stop if it happens
// to exit the ISR after the start time for the next interrupt has already passed.
timer_instance[timer_num]->setPreloadEnable(false);
HAL_timer_enable_interrupt(timer_num);
/*
* Initializes (and unfortunately starts) the timer.
* This is needed to set correct IRQ priority at the moment but causes
* no harm since every call to HAL_timer_start() is actually followed by
* a call to HAL_timer_enable_interrupt() which means that there isn't
* a case in which you want the timer to run without a callback.
*/
// Start the timer.
timer_instance[timer_num]->resume(); // First call to resume() MUST follow the attachInterrupt()
// This is fixed in Arduino_Core_STM32 1.8.
@ -161,18 +159,17 @@ void HAL_timer_start(const uint8_t timer_num, const uint32_t frequency) {
// timer_instance[timer_num]->setInterruptPriority
switch (timer_num) {
case STEP_TIMER_NUM:
HAL_NVIC_SetPriority(STEP_TIMER_IRQ_NAME, STEP_TIMER_IRQ_PRIO, 0);
timer_instance[timer_num]->setInterruptPriority(STEP_TIMER_IRQ_PRIO, 0);
break;
case TEMP_TIMER_NUM:
HAL_NVIC_SetPriority(TEMP_TIMER_IRQ_NAME, TEMP_TIMER_IRQ_PRIO, 0);
timer_instance[timer_num]->setInterruptPriority(TEMP_TIMER_IRQ_PRIO, 0);
break;
}
}
}
void HAL_timer_enable_interrupt(const uint8_t timer_num) {
if (HAL_timer_initialized(timer_num) && !timer_enabled[timer_num]) {
timer_enabled[timer_num] = true;
if (HAL_timer_initialized(timer_num) && !timer_instance[timer_num]->hasInterrupt()) {
switch (timer_num) {
case STEP_TIMER_NUM:
timer_instance[timer_num]->attachInterrupt(Step_Handler);
@ -185,23 +182,11 @@ void HAL_timer_enable_interrupt(const uint8_t timer_num) {
}
void HAL_timer_disable_interrupt(const uint8_t timer_num) {
if (HAL_timer_interrupt_enabled(timer_num)) {
timer_instance[timer_num]->detachInterrupt();
timer_enabled[timer_num] = false;
}
if (HAL_timer_initialized(timer_num)) timer_instance[timer_num]->detachInterrupt();
}
bool HAL_timer_interrupt_enabled(const uint8_t timer_num) {
return HAL_timer_initialized(timer_num) && timer_enabled[timer_num];
}
// Only for use within the HAL
TIM_TypeDef * HAL_timer_device(const uint8_t timer_num) {
switch (timer_num) {
case STEP_TIMER_NUM: return STEP_TIMER_DEV;
case TEMP_TIMER_NUM: return TEMP_TIMER_DEV;
}
return nullptr;
return HAL_timer_initialized(timer_num) && timer_instance[timer_num]->hasInterrupt();
}
void SetTimerInterruptPriorities() {
@ -209,4 +194,87 @@ void SetTimerInterruptPriorities() {
TERN_(HAS_SERVOS, libServo::setInterruptPriority(SERVO_TIMER_IRQ_PRIO, 0));
}
// This is a terrible hack to replicate the behavior used in the framework's SoftwareSerial.cpp
// to choose a serial timer. It will select TIM7 on most boards used by Marlin, but this is more
// resiliant to new MCUs which may not have a TIM7. Best practice is to explicitly specify
// TIMER_SERIAL to avoid relying on framework selections which may not be predictable.
#if !defined(TIMER_SERIAL)
#if defined (TIM18_BASE)
#define TIMER_SERIAL TIM18
#elif defined (TIM7_BASE)
#define TIMER_SERIAL TIM7
#elif defined (TIM6_BASE)
#define TIMER_SERIAL TIM6
#elif defined (TIM22_BASE)
#define TIMER_SERIAL TIM22
#elif defined (TIM21_BASE)
#define TIMER_SERIAL TIM21
#elif defined (TIM17_BASE)
#define TIMER_SERIAL TIM17
#elif defined (TIM16_BASE)
#define TIMER_SERIAL TIM16
#elif defined (TIM15_BASE)
#define TIMER_SERIAL TIM15
#elif defined (TIM14_BASE)
#define TIMER_SERIAL TIM14
#elif defined (TIM13_BASE)
#define TIMER_SERIAL TIM13
#elif defined (TIM11_BASE)
#define TIMER_SERIAL TIM11
#elif defined (TIM10_BASE)
#define TIMER_SERIAL TIM10
#elif defined (TIM12_BASE)
#define TIMER_SERIAL TIM12
#elif defined (TIM19_BASE)
#define TIMER_SERIAL TIM19
#elif defined (TIM9_BASE)
#define TIMER_SERIAL TIM9
#elif defined (TIM5_BASE)
#define TIMER_SERIAL TIM5
#elif defined (TIM4_BASE)
#define TIMER_SERIAL TIM4
#elif defined (TIM3_BASE)
#define TIMER_SERIAL TIM3
#elif defined (TIM2_BASE)
#define TIMER_SERIAL TIM2
#elif defined (TIM20_BASE)
#define TIMER_SERIAL TIM20
#elif defined (TIM8_BASE)
#define TIMER_SERIAL TIM8
#elif defined (TIM1_BASE)
#define TIMER_SERIAL TIM1
#else
#error No suitable timer found for SoftwareSerial, define TIMER_SERIAL in variant.h
#endif
#endif
// Place all timers used into an array, then recursively check for duplicates during compilation.
// This does not currently account for timers used for PWM, such as for fans.
// Timers are actually pointers. Convert to integers to simplify constexpr logic.
static constexpr uintptr_t timers_in_use[] = {
uintptr_t(TEMP_TIMER_DEV), // Override in pins file
uintptr_t(STEP_TIMER_DEV), // Override in pins file
#if HAS_TMC_SW_SERIAL
uintptr_t(TIMER_SERIAL), // Set in variant.h, or as a define in platformio.h if not present in variant.h
#endif
#if ENABLED(SPEAKER)
uintptr_t(TIMER_TONE), // Set in variant.h, or as a define in platformio.h if not present in variant.h
#endif
#if HAS_SERVOS
uintptr_t(TIMER_SERVO), // Set in variant.h, or as a define in platformio.h if not present in variant.h
#endif
};
static constexpr bool verify_no_duplicate_timers() {
LOOP_L_N(i, COUNT(timers_in_use))
LOOP_S_L_N(j, i + 1, COUNT(timers_in_use))
if (timers_in_use[i] == timers_in_use[j]) return false;
return true;
}
// If this assertion fails at compile time, review the timers_in_use array. If default_envs is
// defined properly in platformio.ini, VS Code can evaluate the array when hovering over it,
// making it easy to identify the conflicting timers.
static_assert(verify_no_duplicate_timers(), "One or more timer conflict detected");
#endif // ARDUINO_ARCH_STM32 && !STM32GENERIC

22
Marlin/src/HAL/STM32/timers.h
View File

@ -30,8 +30,18 @@
#define FORCE_INLINE __attribute__((always_inline)) inline
// STM32 timers may be 16 or 32 bit. Limiting HAL_TIMER_TYPE_MAX to 16 bits
// avoids issues with STM32F0 MCUs, which seem to pause timers if UINT32_MAX
// is written to the register. STM32F4 timers do not manifest this issue,
// even when writing to 16 bit timers.
//
// The range of the timer can be queried at runtime using IS_TIM_32B_COUNTER_INSTANCE.
// This is a more expensive check than a simple compile-time constant, so its
// implementation is deferred until the desire for a 32-bit range outweighs the cost
// of adding a run-time check and HAL_TIMER_TYPE_MAX is refactored to allow unique
// values for each timer.
#define hal_timer_t uint32_t
#define HAL_TIMER_TYPE_MAX 0xFFFFFFFF // Timers can be 16 or 32 bit
#define HAL_TIMER_TYPE_MAX UINT16_MAX
#ifndef STEP_TIMER_NUM
#define STEP_TIMER_NUM 0 // Timer Index for Stepper
@ -61,14 +71,14 @@
#define ENABLE_TEMPERATURE_INTERRUPT() HAL_timer_enable_interrupt(TEMP_TIMER_NUM)
#define DISABLE_TEMPERATURE_INTERRUPT() HAL_timer_disable_interrupt(TEMP_TIMER_NUM)
extern void Step_Handler(HardwareTimer *htim);
extern void Temp_Handler(HardwareTimer *htim);
extern void Step_Handler();
extern void Temp_Handler();
#ifndef HAL_STEP_TIMER_ISR
#define HAL_STEP_TIMER_ISR() void Step_Handler(HardwareTimer *htim)
#define HAL_STEP_TIMER_ISR() void Step_Handler()
#endif
#ifndef HAL_TEMP_TIMER_ISR
#define HAL_TEMP_TIMER_ISR() void Temp_Handler(HardwareTimer *htim)
#define HAL_TEMP_TIMER_ISR() void Temp_Handler()
#endif
// ------------------------
@ -90,8 +100,6 @@ bool HAL_timer_interrupt_enabled(const uint8_t timer_num);
// Exposed here to allow all timer priority information to reside in timers.cpp
void SetTimerInterruptPriorities();
//TIM_TypeDef* HAL_timer_device(const uint8_t timer_num); no need to be public for now. not public = not used externally
// FORCE_INLINE because these are used in performance-critical situations
FORCE_INLINE bool HAL_timer_initialized(const uint8_t timer_num) {
return timer_instance[timer_num] != NULL;

106
Marlin/src/HAL/STM32F1/HAL.h
View File

@ -46,12 +46,14 @@
#include "msc_sd.h"
#endif
#include "MarlinSerial.h"
// ------------------------
// Defines
// ------------------------
#ifndef STM32_FLASH_SIZE
#if defined(MCU_STM32F103RE) || defined(MCU_STM32F103VE)
#if EITHER(MCU_STM32F103RE, MCU_STM32F103VE)
#define STM32_FLASH_SIZE 512
#else
#define STM32_FLASH_SIZE 256
@ -64,86 +66,50 @@
#else
#define UsbSerial MarlinCompositeSerial
#endif
#define MSerial1 Serial1
#define MSerial2 Serial2
#define MSerial3 Serial3
#define MSerial4 Serial4
#define MSerial5 Serial5
#else
#define MSerial1 Serial
#define MSerial2 Serial1
#define MSerial3 Serial2
#define MSerial4 Serial3
#define MSerial5 Serial4
#endif
#if SERIAL_PORT == 0
#error "SERIAL_PORT cannot be 0. (Port 0 does not exist.) Please update your configuration."
#elif SERIAL_PORT == -1
#define MYSERIAL0 UsbSerial
#elif SERIAL_PORT == 1
#define MYSERIAL0 MSerial1
#elif SERIAL_PORT == 2
#define MYSERIAL0 MSerial2
#elif SERIAL_PORT == 3
#define MYSERIAL0 MSerial3
#elif SERIAL_PORT == 4
#define MYSERIAL0 MSerial4
#elif SERIAL_PORT == 5
#define MYSERIAL0 MSerial5
#define _MSERIAL(X) MSerial##X
#define MSERIAL(X) _MSERIAL(X)
#if EITHER(STM32_HIGH_DENSITY, STM32_XL_DENSITY)
#define NUM_UARTS 5
#else
#error "SERIAL_PORT must be from -1 to 5. Please update your configuration."
#define NUM_UARTS 3
#endif
#if SERIAL_PORT == -1
#define MYSERIAL0 UsbSerial
#elif WITHIN(SERIAL_PORT, 1, NUM_UARTS)
#define MYSERIAL0 MSERIAL(SERIAL_PORT)
#elif NUM_UARTS == 5
#error "SERIAL_PORT must be -1 or from 1 to 5. Please update your configuration."
#else
#error "SERIAL_PORT must be -1 or from 1 to 3. Please update your configuration."
#endif
#ifdef SERIAL_PORT_2
#if SERIAL_PORT_2 == 0
#error "SERIAL_PORT_2 cannot be 0. (Port 0 does not exist.) Please update your configuration."
#elif SERIAL_PORT_2 == SERIAL_PORT
#error "SERIAL_PORT_2 must be different than SERIAL_PORT. Please update your configuration."
#elif SERIAL_PORT_2 == -1
#if SERIAL_PORT_2 == -1
#define MYSERIAL1 UsbSerial
#elif SERIAL_PORT_2 == 1
#define MYSERIAL1 MSerial1
#elif SERIAL_PORT_2 == 2
#define MYSERIAL1 MSerial2
#elif SERIAL_PORT_2 == 3
#define MYSERIAL1 MSerial3
#elif SERIAL_PORT_2 == 4
#define MYSERIAL1 MSerial4
#elif SERIAL_PORT_2 == 5
#define MYSERIAL1 MSerial5
#elif WITHIN(SERIAL_PORT_2, 1, NUM_UARTS)
#define MYSERIAL1 MSERIAL(SERIAL_PORT_2)
#elif NUM_UARTS == 5
#error "SERIAL_PORT_2 must be -1 or from 1 to 5. Please update your configuration."
#else
#error "SERIAL_PORT_2 must be from -1 to 5. Please update your configuration."
#endif
#define NUM_SERIAL 2
#else
#define NUM_SERIAL 1
#endif
#ifdef DGUS_SERIAL
#if DGUS_SERIAL_PORT == 0
#error "DGUS_SERIAL_PORT cannot be 0. (Port 0 does not exist.) Please update your configuration."
#elif DGUS_SERIAL_PORT == SERIAL_PORT
#error "DGUS_SERIAL_PORT must be different than SERIAL_PORT. Please update your configuration."
#elif defined(SERIAL_PORT_2) && DGUS_SERIAL_PORT == SERIAL_PORT_2
#error "DGUS_SERIAL_PORT must be different than SERIAL_PORT_2. Please update your configuration."
#elif DGUS_SERIAL_PORT == -1
#define DGUS_SERIAL UsbSerial
#elif DGUS_SERIAL_PORT == 1
#define DGUS_SERIAL MSerial1
#elif DGUS_SERIAL_PORT == 2
#define DGUS_SERIAL MSerial2
#elif DGUS_SERIAL_PORT == 3
#define DGUS_SERIAL MSerial3
#elif DGUS_SERIAL_PORT == 4
#define DGUS_SERIAL MSerial4
#elif DGUS_SERIAL_PORT == 5
#define DGUS_SERIAL MSerial5
#else
#error "DGUS_SERIAL_PORT must be from -1 to 5. Please update your configuration."
#error "SERIAL_PORT_2 must be -1 or from 1 to 3. Please update your configuration."
#endif
#endif
#ifdef LCD_SERIAL_PORT
#if LCD_SERIAL_PORT == -1
#define LCD_SERIAL UsbSerial
#elif WITHIN(LCD_SERIAL_PORT, 1, NUM_UARTS)
#define LCD_SERIAL MSERIAL(LCD_SERIAL_PORT)
#elif NUM_UARTS == 5
#error "LCD_SERIAL_PORT must be -1 or from 1 to 5. Please update your configuration."
#else
#error "LCD_SERIAL_PORT must be -1 or from 1 to 3. Please update your configuration."
#endif
#endif
// Set interrupt grouping for this MCU
void HAL_init();

193
Marlin/src/HAL/STM32F1/MarlinSerial.cpp Normal file
View File

@ -0,0 +1,193 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#ifdef __STM32F1__
#include "../../inc/MarlinConfig.h"
#include "MarlinSerial.h"
#include <libmaple/usart.h>
// Copied from ~/.platformio/packages/framework-arduinoststm32-maple/STM32F1/system/libmaple/usart_private.h
// Changed to handle Emergency Parser
static inline __always_inline void my_usart_irq(ring_buffer *rb, ring_buffer *wb, usart_reg_map *regs, MarlinSerial &serial) {
/* Handle RXNEIE and TXEIE interrupts.
* RXNE signifies availability of a byte in DR.
*
* See table 198 (sec 27.4, p809) in STM document RM0008 rev 15.
* We enable RXNEIE.
*/
uint32_t srflags = regs->SR, cr1its = regs->CR1;
if ((cr1its & USART_CR1_RXNEIE) && (srflags & USART_SR_RXNE)) {
if (srflags & USART_SR_FE || srflags & USART_SR_PE ) {
// framing error or parity error
regs->DR; // Read and throw away the data, which also clears FE and PE
}
else {
uint8_t c = (uint8)regs->DR;
#ifdef USART_SAFE_INSERT
// If the buffer is full and the user defines USART_SAFE_INSERT,
// ignore new bytes.
rb_safe_insert(rb, c);
#else
// By default, push bytes around in the ring buffer.
rb_push_insert(rb, c);
#endif
#if ENABLED(EMERGENCY_PARSER)
if (serial.emergency_parser_enabled())
emergency_parser.update(serial.emergency_state, c);
#endif
}
}
else if (srflags & USART_SR_ORE) {
// overrun and empty data, just do a dummy read to clear ORE
// and prevent a raise condition where a continous interrupt stream (due to ORE set) occurs
// (see chapter "Overrun error" ) in STM32 reference manual
regs->DR;
}
// TXE signifies readiness to send a byte to DR.
if ((cr1its & USART_CR1_TXEIE) && (srflags & USART_SR_TXE)) {
if (!rb_is_empty(wb))
regs->DR=rb_remove(wb);
else
regs->CR1 &= ~((uint32)USART_CR1_TXEIE); // disable TXEIE
}
}
// Not every MarlinSerial port should handle emergency parsing.
// It would not make sense to parse GCode from TMC responses, for example.
constexpr bool serial_handles_emergency(int port) {
return false
#ifdef SERIAL_PORT
|| (SERIAL_PORT) == port
#endif
#ifdef SERIAL_PORT_2
|| (SERIAL_PORT_2) == port
#endif
#ifdef LCD_SERIAL_PORT
|| (LCD_SERIAL_PORT) == port
#endif
;
}
#define DEFINE_HWSERIAL_MARLIN(name, n) \
MarlinSerial name(USART##n, \
BOARD_USART##n##_TX_PIN, \
BOARD_USART##n##_RX_PIN, \
serial_handles_emergency(n)); \
extern "C" void __irq_usart##n(void) { \
my_usart_irq(USART##n->rb, USART##n->wb, USART##n##_BASE, MSerial##n); \
}
#define DEFINE_HWSERIAL_UART_MARLIN(name, n) \
MarlinSerial name(UART##n, \
BOARD_USART##n##_TX_PIN, \
BOARD_USART##n##_RX_PIN, \
serial_handles_emergency(n)); \
extern "C" void __irq_usart##n(void) { \
my_usart_irq(UART##n->rb, UART##n->wb, UART##n##_BASE, MSerial##n); \
}
// Instantiate all UARTs even if they are not needed
// This avoids a bunch of logic to figure out every serial
// port which may be in use on the system.
DEFINE_HWSERIAL_MARLIN(MSerial1, 1);
DEFINE_HWSERIAL_MARLIN(MSerial2, 2);
DEFINE_HWSERIAL_MARLIN(MSerial3, 3);
#if EITHER(STM32_HIGH_DENSITY, STM32_XL_DENSITY)
DEFINE_HWSERIAL_UART_MARLIN(MSerial4, 4);
DEFINE_HWSERIAL_UART_MARLIN(MSerial5, 5);
#endif
// Check the type of each serial port by passing it to a template function.
// HardwareSerial is known to sometimes hang the controller when an error occurs,
// so this case will fail the static assert. All other classes are assumed to be ok.
template <typename T>
constexpr bool IsSerialClassAllowed(const T&) { return true; }
constexpr bool IsSerialClassAllowed(const HardwareSerial&) { return false; }
#define CHECK_CFG_SERIAL(A) static_assert(IsSerialClassAllowed(A), STRINGIFY(A) " is defined incorrectly");
#define CHECK_AXIS_SERIAL(A) static_assert(IsSerialClassAllowed(A##_HARDWARE_SERIAL), STRINGIFY(A) "_HARDWARE_SERIAL must be defined in the form MSerial1, rather than Serial1");
// If you encounter this error, replace SerialX with MSerialX, for example MSerial3.
// Non-TMC ports were already validated in HAL.h, so do not require verbose error messages.
#ifdef MYSERIAL0
CHECK_CFG_SERIAL(MYSERIAL0);
#endif
#ifdef MYSERIAL1
CHECK_CFG_SERIAL(MYSERIAL1);
#endif
#ifdef LCD_SERIAL
CHECK_CFG_SERIAL(LCD_SERIAL);
#endif
#if AXIS_HAS_HW_SERIAL(X)
CHECK_AXIS_SERIAL(X);
#endif
#if AXIS_HAS_HW_SERIAL(X2)
CHECK_AXIS_SERIAL(X2);
#endif
#if AXIS_HAS_HW_SERIAL(Y)
CHECK_AXIS_SERIAL(Y);
#endif
#if AXIS_HAS_HW_SERIAL(Y2)
CHECK_AXIS_SERIAL(Y2);
#endif
#if AXIS_HAS_HW_SERIAL(Z)
CHECK_AXIS_SERIAL(Z);
#endif
#if AXIS_HAS_HW_SERIAL(Z2)
CHECK_AXIS_SERIAL(Z2);
#endif
#if AXIS_HAS_HW_SERIAL(Z3)
CHECK_AXIS_SERIAL(Z3);
#endif
#if AXIS_HAS_HW_SERIAL(Z4)
CHECK_AXIS_SERIAL(Z4);
#endif
#if AXIS_HAS_HW_SERIAL(E0)
CHECK_AXIS_SERIAL(E0);
#endif
#if AXIS_HAS_HW_SERIAL(E1)
CHECK_AXIS_SERIAL(E1);
#endif
#if AXIS_HAS_HW_SERIAL(E2)
CHECK_AXIS_SERIAL(E2);
#endif
#if AXIS_HAS_HW_SERIAL(E3)
CHECK_AXIS_SERIAL(E3);
#endif
#if AXIS_HAS_HW_SERIAL(E4)
CHECK_AXIS_SERIAL(E4);
#endif
#if AXIS_HAS_HW_SERIAL(E5)
CHECK_AXIS_SERIAL(E5);
#endif
#if AXIS_HAS_HW_SERIAL(E6)
CHECK_AXIS_SERIAL(E6);
#endif
#if AXIS_HAS_HW_SERIAL(E7)
CHECK_AXIS_SERIAL(E7);
#endif
#endif // __STM32F1__

71
Marlin/src/HAL/STM32F1/MarlinSerial.h Normal file
View File

@ -0,0 +1,71 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
#include <HardwareSerial.h>
#include <libmaple/usart.h>
#include <WString.h>
#include "../../inc/MarlinConfigPre.h"
#if ENABLED(EMERGENCY_PARSER)
#include "../../feature/e_parser.h"
#endif
// Increase priority of serial interrupts, to reduce overflow errors
#define UART_IRQ_PRIO 1
class MarlinSerial : public HardwareSerial {
public:
#if ENABLED(EMERGENCY_PARSER)
const bool ep_enabled;
EmergencyParser::State emergency_state;
inline bool emergency_parser_enabled() { return ep_enabled; }
#endif
MarlinSerial(struct usart_dev *usart_device, uint8 tx_pin, uint8 rx_pin, bool TERN_(EMERGENCY_PARSER, ep_capable)) :
HardwareSerial(usart_device, tx_pin, rx_pin)
#if ENABLED(EMERGENCY_PARSER)
, ep_enabled(ep_capable)
, emergency_state(EmergencyParser::State::EP_RESET)
#endif
{ }
#ifdef UART_IRQ_PRIO
// Shadow the parent methods to set IRQ priority after begin()
void begin(uint32 baud) {
MarlinSerial::begin(baud, SERIAL_8N1);
}
void begin(uint32 baud, uint8_t config) {
HardwareSerial::begin(baud, config);
nvic_irq_set_priority(c_dev()->irq_num, UART_IRQ_PRIO);
}
#endif
};
extern MarlinSerial MSerial1;
extern MarlinSerial MSerial2;
extern MarlinSerial MSerial3;
#if EITHER(STM32_HIGH_DENSITY, STM32_XL_DENSITY)
extern MarlinSerial MSerial4;
extern MarlinSerial MSerial5;
#endif

5
Marlin/src/HAL/STM32F1/SPI.cpp
View File

@ -40,6 +40,9 @@
#include <boards.h>
#include <wirish.h>
#include "../../inc/MarlinConfig.h"
#include "spi_pins.h"
/** Time in ms for DMA receive timeout */
#define DMA_TIMEOUT 100
@ -710,6 +713,6 @@ static spi_baud_rate determine_baud_rate(spi_dev *dev, uint32_t freq) {
return baud_rates[i];
}
SPIClass SPI(1);
SPIClass SPI(SPI_DEVICE);
#endif // __STM32F1__

4
Marlin/src/HAL/STM32F1/dogm/u8g_com_stm32duino_swspi.cpp
View File

@ -20,7 +20,7 @@
#include "../../../inc/MarlinConfig.h"
#if BOTH(HAS_GRAPHICAL_LCD, FORCE_SOFT_SPI)
#if BOTH(HAS_MARLINUI_U8GLIB, FORCE_SOFT_SPI)
#include "../HAL.h"
#include <U8glib.h>
@ -161,5 +161,5 @@ uint8_t u8g_com_HAL_STM32F1_sw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val,
return 1;
}
#endif // HAS_GRAPHICAL_LCD
#endif // HAS_MARLINUI_U8GLIB
#endif // STM32F1

4
Marlin/src/HAL/STM32F1/inc/SanityCheck.h
View File

@ -25,10 +25,6 @@
* Test STM32F1-specific configuration values for errors at compile-time.
*/
#if ENABLED(EMERGENCY_PARSER)
#error "EMERGENCY_PARSER is not yet implemented for STM32F1. Disable EMERGENCY_PARSER to continue."
#endif
#if ENABLED(FAST_PWM_FAN) || SPINDLE_LASER_FREQUENCY
#error "Features requiring Hardware PWM (FAST_PWM_FAN, SPINDLE_LASER_FREQUENCY) are not yet supported on STM32F1."
#endif

18
Marlin/src/HAL/STM32F1/msc_sd.cpp
View File

@ -21,7 +21,7 @@
#define PRODUCT_ID 0x29
USBMassStorage MarlinMSC;
USBCompositeSerial MarlinCompositeSerial;
MarlinUSBCompositeSerial MarlinCompositeSerial;
#include "../../inc/MarlinConfig.h"
@ -38,6 +38,17 @@ USBCompositeSerial MarlinCompositeSerial;
#endif
#if ENABLED(EMERGENCY_PARSER)
void (*real_rx_callback)(void);
void my_rx_callback(void) {
real_rx_callback();
int len = MarlinCompositeSerial.available();
while (len-- > 0) // >0 because available() may return a negative value
emergency_parser.update(MarlinCompositeSerial.emergency_state, MarlinCompositeSerial.peek());
}
#endif
void MSC_SD_init() {
USBComposite.setProductId(PRODUCT_ID);
// Just set MarlinCompositeSerial enabled to true
@ -59,6 +70,11 @@ void MSC_SD_init() {
// Register composite Serial
MarlinCompositeSerial.registerComponent();
USBComposite.begin();
#if ENABLED(EMERGENCY_PARSER)
//rx is usbSerialPart.endpoints[2]
real_rx_callback = usbSerialPart.endpoints[2].callback;
usbSerialPart.endpoints[2].callback = my_rx_callback;
#endif
}
#endif // USE_USB_COMPOSITE

21
Marlin/src/HAL/STM32F1/msc_sd.h
View File

@ -17,7 +17,26 @@
#include <USBComposite.h>
#include "../../inc/MarlinConfigPre.h"
#if ENABLED(EMERGENCY_PARSER)
#include "../../feature/e_parser.h"
#endif
class MarlinUSBCompositeSerial : public USBCompositeSerial {
public:
MarlinUSBCompositeSerial() : USBCompositeSerial()
#if ENABLED(EMERGENCY_PARSER)
, emergency_state(EmergencyParser::State::EP_RESET)
#endif
{ }
#if ENABLED(EMERGENCY_PARSER)
EmergencyParser::State emergency_state;
inline bool emergency_parser_enabled() { return true; }
#endif
};
extern USBMassStorage MarlinMSC;
extern USBCompositeSerial MarlinCompositeSerial;
extern MarlinUSBCompositeSerial MarlinCompositeSerial;
void MSC_SD_init();

17
Marlin/src/HAL/STM32F1/onboard_sd.cpp
View File

@ -9,7 +9,6 @@
* No restriction on use. You can use, modify and redistribute it for
* personal, non-profit or commercial products UNDER YOUR RESPONSIBILITY.
* Redistributions of source code must retain the above copyright notice.
*
*/
#include "../../inc/MarlinConfig.h"
@ -21,23 +20,23 @@
#include "fastio.h"
#if HAS_SHARED_MEDIA
#ifndef ON_BOARD_SPI_DEVICE
#define ON_BOARD_SPI_DEVICE SPI_DEVICE
#ifndef ONBOARD_SPI_DEVICE
#define ONBOARD_SPI_DEVICE SPI_DEVICE
#endif
#define ONBOARD_SD_SPI SPI
#else
SPIClass OnBoardSPI(ON_BOARD_SPI_DEVICE);
#define ONBOARD_SD_SPI OnBoardSPI
SPIClass OnboardSPI(ONBOARD_SPI_DEVICE);
#define ONBOARD_SD_SPI OnboardSPI
#endif
#if ON_BOARD_SPI_DEVICE == 1
#if ONBOARD_SPI_DEVICE == 1
#define SPI_CLOCK_MAX SPI_BAUD_PCLK_DIV_4
#else
#define SPI_CLOCK_MAX SPI_BAUD_PCLK_DIV_2
#endif
#define CS_LOW() WRITE(ONBOARD_SD_CS_PIN, LOW) /* Set OnBoardSPI cs low */
#define CS_HIGH() WRITE(ONBOARD_SD_CS_PIN, HIGH) /* Set OnBoardSPI cs high */
#define CS_LOW() WRITE(ONBOARD_SD_CS_PIN, LOW) /* Set OnboardSPI cs low */
#define CS_HIGH() WRITE(ONBOARD_SD_CS_PIN, HIGH) /* Set OnboardSPI cs high */
#define FCLK_FAST() ONBOARD_SD_SPI.setClockDivider(SPI_CLOCK_MAX)
#define FCLK_SLOW() ONBOARD_SD_SPI.setClockDivider(SPI_BAUD_PCLK_DIV_256)
@ -152,7 +151,7 @@ static int select() { /* 1:OK, 0:Timeout */
/*-----------------------------------------------------------------------*/
static void power_on() { /* Enable SSP module and attach it to I/O pads */
ONBOARD_SD_SPI.setModule(ON_BOARD_SPI_DEVICE);
ONBOARD_SD_SPI.setModule(ONBOARD_SPI_DEVICE);
ONBOARD_SD_SPI.begin();
ONBOARD_SD_SPI.setBitOrder(MSBFIRST);
ONBOARD_SD_SPI.setDataMode(SPI_MODE0);

2
Marlin/src/HAL/STM32F1/sdio.cpp
View File

@ -26,7 +26,7 @@
#include "../../inc/MarlinConfig.h" // Allow pins/pins.h to set density
#if defined(STM32_HIGH_DENSITY) || defined(STM32_XL_DENSITY)
#if EITHER(STM32_HIGH_DENSITY, STM32_XL_DENSITY)
#include "sdio.h"

12
Marlin/src/HAL/STM32F1/tft/tft_fsmc.cpp
View File

@ -89,6 +89,16 @@ void TFT_FSMC::Init() {
uint8_t cs = FSMC_CS_PIN, rs = FSMC_RS_PIN;
uint32_t controllerAddress;
#if PIN_EXISTS(TFT_BACKLIGHT)
OUT_WRITE(TFT_BACKLIGHT_PIN, DISABLED(DELAYED_BACKLIGHT_INIT));
#endif
#if ENABLED(LCD_USE_DMA_FSMC)
dma_init(FSMC_DMA_DEV);
dma_disable(FSMC_DMA_DEV, FSMC_DMA_CHANNEL);
dma_set_priority(FSMC_DMA_DEV, FSMC_DMA_CHANNEL, DMA_PRIORITY_MEDIUM);
#endif
#if PIN_EXISTS(TFT_RESET)
OUT_WRITE(TFT_RESET_PIN, HIGH);
delay(100);
@ -201,6 +211,8 @@ uint32_t TFT_FSMC::GetID() {
id = ReadID(LCD_READ_ID);
if ((id & 0xFFFF) == 0 || (id & 0xFFFF) == 0xFFFF)
id = ReadID(LCD_READ_ID4);
if ((id & 0xFF00) == 0 && (id & 0xFF) != 0)
id = ReadID(LCD_READ_ID4);
return id;
}

73
Marlin/src/HAL/STM32_F4_F7/HAL.h
View File

@ -46,24 +46,16 @@
// Serial override
//extern HalSerial usb_serial;
#define _MSERIAL(X) SerialUART##X
#define MSERIAL(X) _MSERIAL(X)
#define SerialUART0 Serial1
#if defined(STM32F4) && SERIAL_PORT == 0
#error "SERIAL_PORT cannot be 0. (Port 0 does not exist.) Please update your configuration."
#elif SERIAL_PORT == -1
#define MYSERIAL0 SerialUSB
#elif SERIAL_PORT == 0
#define MYSERIAL0 Serial1
#elif SERIAL_PORT == 1
#define MYSERIAL0 SerialUART1
#elif SERIAL_PORT == 2
#define MYSERIAL0 SerialUART2
#elif SERIAL_PORT == 3
#define MYSERIAL0 SerialUART3
#elif SERIAL_PORT == 4
#define MYSERIAL0 SerialUART4
#elif SERIAL_PORT == 5
#define MYSERIAL0 SerialUART5
#elif SERIAL_PORT == 6
#define MYSERIAL0 SerialUART6
#elif WITHIN(SERIAL_PORT, 0, 6)
#define MYSERIAL0 MSERIAL(SERIAL_PORT)
#else
#error "SERIAL_PORT must be from -1 to 6. Please update your configuration."
#endif
@ -71,57 +63,24 @@
#ifdef SERIAL_PORT_2
#if defined(STM32F4) && SERIAL_PORT_2 == 0
#error "SERIAL_PORT_2 cannot be 0. (Port 0 does not exist.) Please update your configuration."
#elif SERIAL_PORT_2 == SERIAL_PORT
#error "SERIAL_PORT_2 must be different than SERIAL_PORT. Please update your configuration."
#elif SERIAL_PORT_2 == -1
#define MYSERIAL1 SerialUSB
#elif SERIAL_PORT_2 == 0
#define MYSERIAL1 Serial1
#elif SERIAL_PORT_2 == 1
#define MYSERIAL1 SerialUART1
#elif SERIAL_PORT_2 == 2
#define MYSERIAL1 SerialUART2
#elif SERIAL_PORT_2 == 3
#define MYSERIAL1 SerialUART3
#elif SERIAL_PORT_2 == 4
#define MYSERIAL1 SerialUART4
#elif SERIAL_PORT_2 == 5
#define MYSERIAL1 SerialUART5
#elif SERIAL_PORT_2 == 6
#define MYSERIAL1 SerialUART6
#elif WITHIN(SERIAL_PORT_2, 0, 6)
#define MYSERIAL1 MSERIAL(SERIAL_PORT_2)
#else
#error "SERIAL_PORT_2 must be from -1 to 6. Please update your configuration."
#endif
#define NUM_SERIAL 2
#else
#define NUM_SERIAL 1
#endif
#ifdef DGUS_SERIAL_PORT
#if defined(STM32F4) && DGUS_SERIAL_PORT == 0
#error "DGUS_SERIAL_PORT cannot be 0. (Port 0 does not exist.) Please update your configuration."
#elif DGUS_SERIAL_PORT == SERIAL_PORT
#error "DGUS_SERIAL_PORT must be different than SERIAL_PORT. Please update your configuration."
#elif defined(SERIAL_PORT_2) && DGUS_SERIAL_PORT == SERIAL_PORT_2
#error "DGUS_SERIAL_PORT must be different than SERIAL_PORT_2. Please update your configuration."
#elif DGUS_SERIAL_PORT == -1
#define DGUS_SERIAL SerialUSB
#elif DGUS_SERIAL_PORT == 0
#define DGUS_SERIAL Serial1
#elif DGUS_SERIAL_PORT == 1
#define DGUS_SERIAL SerialUART1
#elif DGUS_SERIAL_PORT == 2
#define DGUS_SERIAL SerialUART2
#elif DGUS_SERIAL_PORT == 3
#define DGUS_SERIAL SerialUART3
#elif DGUS_SERIAL_PORT == 4
#define DGUS_SERIAL SerialUART4
#elif DGUS_SERIAL_PORT == 5
#define DGUS_SERIAL SerialUART5
#elif DGUS_SERIAL_PORT == 6
#define DGUS_SERIAL SerialUART6
#ifdef LCD_SERIAL_PORT
#if defined(STM32F4) && LCD_SERIAL_PORT == 0
#error "LCD_SERIAL_PORT cannot be 0. (Port 0 does not exist.) Please update your configuration."
#elif LCD_SERIAL_PORT == -1
#define LCD_SERIAL SerialUSB
#elif WITHIN(LCD_SERIAL_PORT, 0, 6)
#define LCD_SERIAL MSERIAL(LCD_SERIAL_PORT)
#else
#error "DGUS_SERIAL_PORT must be from -1 to 6. Please update your configuration."
#error "LCD_SERIAL_PORT must be from -1 to 6. Please update your configuration."
#endif
#endif

2
Marlin/src/HAL/STM32_F4_F7/HAL_SPI.cpp
View File

@ -72,7 +72,7 @@ static SPISettings spiConfig;
*/
void spiBegin() {
#if !defined(SS_PIN) || SS_PIN < 0
#error SS_PIN not defined!
#error "SS_PIN not defined!"
#endif
OUT_WRITE(SS_PIN, HIGH);

2
Marlin/src/HAL/STM32_F4_F7/STM32F7/TMC2660.cpp
View File

@ -22,7 +22,6 @@
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*
*/
#if defined(STM32GENERIC) && defined(STM32F7)
@ -662,7 +661,6 @@ boolean TMC26XStepper::isEnabled() { return !!(chopper_config_register & T_OFF_P
/**
* reads a value from the TMC26X status register. The value is not obtained directly but can then
* be read by the various status routines.
*
*/
void TMC26XStepper::readStatus(char read_value) {
uint32_t old_driver_configuration_register_value = driver_configuration_register_value;

1
Marlin/src/HAL/STM32_F4_F7/STM32F7/TMC2660.h
View File

@ -22,7 +22,6 @@
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*
*/
#pragma once

20
Marlin/src/HAL/TEENSY31_32/HAL.h
View File

@ -44,21 +44,19 @@
//#undef MOTHERBOARD
//#define MOTHERBOARD BOARD_TEENSY31_32
#define IS_32BIT_TEENSY defined(__MK20DX256__)
#define IS_TEENSY32 defined(__MK20DX256__)
#ifdef __MK20DX256__
#define IS_32BIT_TEENSY 1
#define IS_TEENSY32 1
#endif
#define NUM_SERIAL 1
#define _MSERIAL(X) Serial##X
#define MSERIAL(X) _MSERIAL(X)
#define Serial0 Serial
#if SERIAL_PORT == -1
#define MYSERIAL0 SerialUSB
#elif SERIAL_PORT == 0
#define MYSERIAL0 Serial
#elif SERIAL_PORT == 1
#define MYSERIAL0 Serial1
#elif SERIAL_PORT == 2
#define MYSERIAL0 Serial2
#elif SERIAL_PORT == 3
#define MYSERIAL0 Serial3
#elif WITHIN(SERIAL_PORT, 0, 3)
#define MYSERIAL0 MSERIAL(SERIAL_PORT)
#endif
#define HAL_SERVO_LIB libServo

25
Marlin/src/HAL/TEENSY35_36/HAL.h
View File

@ -45,22 +45,23 @@
// Defines
// ------------------------
#define IS_32BIT_TEENSY (defined(__MK64FX512__) || defined(__MK66FX1M0__))
#define IS_TEENSY35 defined(__MK64FX512__)
#define IS_TEENSY36 defined(__MK66FX1M0__)
#ifdef __MK64FX512__
#define IS_32BIT_TEENSY 1
#define IS_TEENSY35 1
#endif
#ifdef __MK66FX1M0__
#define IS_32BIT_TEENSY 1
#define IS_TEENSY36 1
#endif
#define NUM_SERIAL 1
#define _MSERIAL(X) Serial##X
#define MSERIAL(X) _MSERIAL(X)
#define Serial0 Serial
#if SERIAL_PORT == -1
#define MYSERIAL0 SerialUSB
#elif SERIAL_PORT == 0
#define MYSERIAL0 Serial
#elif SERIAL_PORT == 1
#define MYSERIAL0 Serial1
#elif SERIAL_PORT == 2
#define MYSERIAL0 Serial2
#elif SERIAL_PORT == 3
#define MYSERIAL0 Serial3
#elif WITHIN(SERIAL_PORT, 0, 3)
#define MYSERIAL0 MSERIAL(SERIAL_PORT)
#endif
#define HAL_SERVO_LIB libServo

2
Marlin/src/HAL/TEENSY35_36/HAL_SPI.cpp
View File

@ -31,7 +31,7 @@ static SPISettings spiConfig;
void spiBegin() {
#if !PIN_EXISTS(SS)
#error SS_PIN not defined!
#error "SS_PIN not defined!"
#endif
OUT_WRITE(SS_PIN, HIGH);
SET_OUTPUT(SCK_PIN);

1
Marlin/src/HAL/TEENSY35_36/timers.h
View File

@ -16,6 +16,7 @@
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once

167
Marlin/src/HAL/TEENSY40_41/HAL.cpp Normal file
View File

@ -0,0 +1,167 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
/**
* Description: HAL for Teensy40 (IMXRT1062)
*/
#ifdef __IMXRT1062__
#include "HAL.h"
#include "../shared/Delay.h"
#include "timers.h"
#include <Wire.h>
uint16_t HAL_adc_result, HAL_adc_select;
static const uint8_t pin2sc1a[] = {
0x07, // 0/A0 AD_B1_02
0x08, // 1/A1 AD_B1_03
0x0C, // 2/A2 AD_B1_07
0x0B, // 3/A3 AD_B1_06
0x06, // 4/A4 AD_B1_01
0x05, // 5/A5 AD_B1_00
0x0F, // 6/A6 AD_B1_10
0x00, // 7/A7 AD_B1_11
0x0D, // 8/A8 AD_B1_08
0x0E, // 9/A9 AD_B1_09
0x01, // 24/A10 AD_B0_12
0x02, // 25/A11 AD_B0_13
0x83, // 26/A12 AD_B1_14 - only on ADC2, 3
0x84, // 27/A13 AD_B1_15 - only on ADC2, 4
0x07, // 14/A0 AD_B1_02
0x08, // 15/A1 AD_B1_03
0x0C, // 16/A2 AD_B1_07
0x0B, // 17/A3 AD_B1_06
0x06, // 18/A4 AD_B1_01
0x05, // 19/A5 AD_B1_00
0x0F, // 20/A6 AD_B1_10
0x00, // 21/A7 AD_B1_11
0x0D, // 22/A8 AD_B1_08
0x0E, // 23/A9 AD_B1_09
0x01, // 24/A10 AD_B0_12
0x02, // 25/A11 AD_B0_13
0x83, // 26/A12 AD_B1_14 - only on ADC2, 3
0x84, // 27/A13 AD_B1_15 - only on ADC2, 4
#ifdef ARDUINO_TEENSY41
0xFF, // 28
0xFF, // 29
0xFF, // 30
0xFF, // 31
0xFF, // 32
0xFF, // 33
0xFF, // 34
0xFF, // 35
0xFF, // 36
0xFF, // 37
0x81, // 38/A14 AD_B1_12 - only on ADC2, 1
0x82, // 39/A15 AD_B1_13 - only on ADC2, 2
0x09, // 40/A16 AD_B1_04
0x0A, // 41/A17 AD_B1_05
#endif
};
/*
// disable interrupts
void cli() { noInterrupts(); }
// enable interrupts
void sei() { interrupts(); }
*/
void HAL_adc_init() {
analog_init();
while (ADC1_GC & ADC_GC_CAL) ;
while (ADC2_GC & ADC_GC_CAL) ;
}
void HAL_clear_reset_source() {
uint32_t reset_source = SRC_SRSR;
SRC_SRSR = reset_source;
}
uint8_t HAL_get_reset_source() {
switch (SRC_SRSR & 0xFF) {
case 1: return RST_POWER_ON; break;
case 2: return RST_SOFTWARE; break;
case 4: return RST_EXTERNAL; break;
// case 8: return RST_BROWN_OUT; break;
case 16: return RST_WATCHDOG; break;
case 64: return RST_JTAG; break;
// case 128: return RST_OVERTEMP; break;
}
return 0;
}
#define __bss_end _ebss
extern "C" {
extern char __bss_end;
extern char __heap_start;
extern void* __brkval;
// Doesn't work on Teensy 4.x
uint32_t freeMemory() {
uint32_t free_memory;
if ((uint32_t)__brkval == 0)
free_memory = ((uint32_t)&free_memory) - ((uint32_t)&__bss_end);
else
free_memory = ((uint32_t)&free_memory) - ((uint32_t)__brkval);
return free_memory;
}
}
void HAL_adc_start_conversion(const uint8_t adc_pin) {
const uint16_t pin = pin2sc1a[adc_pin];
if (pin == 0xFF) {
HAL_adc_select = -1; // Digital only
}
else if (pin & 0x80) {
HAL_adc_select = 1;
ADC2_HC0 = pin & 0x7F;
}
else {
HAL_adc_select = 0;
ADC1_HC0 = pin;
}
}
uint16_t HAL_adc_get_result() {
switch (HAL_adc_select) {
case 0:
while (!(ADC1_HS & ADC_HS_COCO0)) ; // wait
return ADC1_R0;
case 1:
while (!(ADC2_HS & ADC_HS_COCO0)) ; // wait
return ADC2_R0;
}
return 0;
}
bool is_output(uint8_t pin) {
const struct digital_pin_bitband_and_config_table_struct *p;
p = digital_pin_to_info_PGM + pin;
return (*(p->reg + 1) & p->mask);
}
#endif // __IMXRT1062__

147
Marlin/src/HAL/TEENSY40_41/HAL.h Normal file
View File

@ -0,0 +1,147 @@
/**
* Marlin 3D Printer Firmware
*
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
* Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com
* Copyright (c) 2015-2016 Nico Tonnhofer wurstnase.reprap@gmail.com
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
/**
* Description: HAL for Teensy 4.0 and Teensy 4.1
*/
#define CPU_32_BIT
#include "../shared/Marduino.h"
#include "../shared/math_32bit.h"
#include "../shared/HAL_SPI.h"
#include "fastio.h"
#include "watchdog.h"
#include <stdint.h>
#include <util/atomic.h>
//#define ST7920_DELAY_1 DELAY_NS(600)
//#define ST7920_DELAY_2 DELAY_NS(750)
//#define ST7920_DELAY_3 DELAY_NS(750)
// ------------------------
// Defines
// ------------------------
#ifdef __IMXRT1062__
#define IS_32BIT_TEENSY 1
#define IS_TEENSY41 1
#endif
#define _MSERIAL(X) Serial##X
#define MSERIAL(X) _MSERIAL(X)
#define Serial0 Serial
#if SERIAL_PORT == -1
#define MYSERIAL0 SerialUSB
#elif WITHIN(SERIAL_PORT, 0, 8)
#define MYSERIAL0 MSERIAL(SERIAL_PORT)
#else
#error "The required SERIAL_PORT must be from -1 to 8. Please update your configuration."
#endif
#ifdef SERIAL_PORT_2
#if SERIAL_PORT_2 == -1
#define MYSERIAL1 usbSerial
#elif WITHIN(SERIAL_PORT_2, 0, 8)
#define MYSERIAL1 MSERIAL(SERIAL_PORT_2)
#else
#error "SERIAL_PORT_2 must be from -1 to 8. Please update your configuration."
#endif
#endif
#define HAL_SERVO_LIB libServo
typedef int8_t pin_t;
#ifndef analogInputToDigitalPin
#define analogInputToDigitalPin(p) ((p < 12u) ? (p) + 54u : -1)
#endif
#define CRITICAL_SECTION_START() uint32_t primask = __get_primask(); __disable_irq()
#define CRITICAL_SECTION_END() if (!primask) __enable_irq()
#define ISRS_ENABLED() (!__get_primask())
#define ENABLE_ISRS() __enable_irq()
#define DISABLE_ISRS() __disable_irq()
#undef sq
#define sq(x) ((x)*(x))
#ifndef strncpy_P
#define strncpy_P(dest, src, num) strncpy((dest), (src), (num))
#endif
// Don't place string constants in PROGMEM
#undef PSTR
#define PSTR(str) ({static const char *data = (str); &data[0];})
// Fix bug in pgm_read_ptr
#undef pgm_read_ptr
#define pgm_read_ptr(addr) (*((void**)(addr)))
// Add type-checking to pgm_read_word
#undef pgm_read_word
#define pgm_read_word(addr) (*((uint16_t*)(addr)))
// Enable hooks into idle and setup for HAL
#define HAL_IDLETASK 1
FORCE_INLINE void HAL_idletask() {}
FORCE_INLINE void HAL_init() {}
// Clear reset reason
void HAL_clear_reset_source();
// Reset reason
uint8_t HAL_get_reset_source();
FORCE_INLINE void _delay_ms(const int delay_ms) { delay(delay_ms); }
#pragma GCC diagnostic push
#pragma GCC diagnostic ignored "-Wunused-function"
extern "C" {
uint32_t freeMemory();
}
#pragma GCC diagnostic pop
// ADC
void HAL_adc_init();
#define HAL_ADC_VREF 3.3
#define HAL_ADC_RESOLUTION 10
#define HAL_ADC_FILTERED // turn off ADC oversampling
#define HAL_START_ADC(pin) HAL_adc_start_conversion(pin)
#define HAL_READ_ADC() HAL_adc_get_result()
#define HAL_ADC_READY() true
#define HAL_ANALOG_SELECT(pin)
void HAL_adc_start_conversion(const uint8_t adc_pin);
uint16_t HAL_adc_get_result();
#define GET_PIN_MAP_PIN(index) index
#define GET_PIN_MAP_INDEX(pin) pin
#define PARSED_PIN_INDEX(code, dval) parser.intval(code, dval)
bool is_output(uint8_t pin);

138
Marlin/src/HAL/TEENSY40_41/HAL_SPI.cpp Normal file
View File

@ -0,0 +1,138 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#ifdef __IMXRT1062__
#include "HAL.h"
#include <SPI.h>
#include <pins_arduino.h>
#include "spi_pins.h"
#include "../../core/macros.h"
static SPISettings spiConfig;
// ------------------------
// Public functions
// ------------------------
#if ENABLED(SOFTWARE_SPI)
// ------------------------
// Software SPI
// ------------------------
#error "Software SPI not supported for Teensy 4. Use Hardware SPI."
#else
// ------------------------
// Hardware SPI
// ------------------------
void spiBegin() {
#ifndef SS_PIN
#error "SS_PIN is not defined!"
#endif
OUT_WRITE(SS_PIN, HIGH);
//SET_OUTPUT(SCK_PIN);
//SET_INPUT(MISO_PIN);
//SET_OUTPUT(MOSI_PIN);
#if 0 && DISABLED(SOFTWARE_SPI)
// set SS high - may be chip select for another SPI device
#if SET_SPI_SS_HIGH
WRITE(SS_PIN, HIGH);
#endif
// set a default rate
spiInit(SPI_HALF_SPEED); // 1
#endif
}
void spiInit(uint8_t spiRate) {
// Use Marlin data-rates
uint32_t clock;
switch (spiRate) {
case SPI_FULL_SPEED: clock = 10000000; break;
case SPI_HALF_SPEED: clock = 5000000; break;
case SPI_QUARTER_SPEED: clock = 2500000; break;
case SPI_EIGHTH_SPEED: clock = 1250000; break;
case SPI_SPEED_5: clock = 625000; break;
case SPI_SPEED_6: clock = 312500; break;
default:
clock = 4000000; // Default from the SPI libarary
}
spiConfig = SPISettings(clock, MSBFIRST, SPI_MODE0);
SPI.begin();
}
uint8_t spiRec() {
SPI.beginTransaction(spiConfig);
uint8_t returnByte = SPI.transfer(0xFF);
SPI.endTransaction();
return returnByte;
//SPDR = 0xFF;
//while (!TEST(SPSR, SPIF)) { /* Intentionally left empty */ }
//return SPDR;
}
void spiRead(uint8_t* buf, uint16_t nbyte) {
SPI.beginTransaction(spiConfig);
SPI.transfer(buf, nbyte);
SPI.endTransaction();
//if (nbyte-- == 0) return;
// SPDR = 0xFF;
//for (uint16_t i = 0; i < nbyte; i++) {
// while (!TEST(SPSR, SPIF)) { /* Intentionally left empty */ }
// buf[i] = SPDR;
// SPDR = 0xFF;
//}
//while (!TEST(SPSR, SPIF)) { /* Intentionally left empty */ }
//buf[nbyte] = SPDR;
}
void spiSend(uint8_t b) {
SPI.beginTransaction(spiConfig);
SPI.transfer(b);
SPI.endTransaction();
//SPDR = b;
//while (!TEST(SPSR, SPIF)) { /* Intentionally left empty */ }
}
void spiSendBlock(uint8_t token, const uint8_t* buf) {
SPI.beginTransaction(spiConfig);
SPDR = token;
for (uint16_t i = 0; i < 512; i += 2) {
while (!TEST(SPSR, SPIF)) { /* nada */ };
SPDR = buf[i];
while (!TEST(SPSR, SPIF)) { /* nada */ };
SPDR = buf[i + 1];
}
while (!TEST(SPSR, SPIF)) { /* nada */ };
SPI.endTransaction();
}
// Begin SPI transaction, set clock, bit order, data mode
void spiBeginTransaction(uint32_t spiClock, uint8_t bitOrder, uint8_t dataMode) {
spiConfig = SPISettings(spiClock, bitOrder, dataMode);
SPI.beginTransaction(spiConfig);
}
#endif // SOFTWARE_SPI
#endif // __IMXRT1062__

57
Marlin/src/HAL/TEENSY40_41/Servo.cpp Normal file
View File

@ -0,0 +1,57 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#ifdef __IMXRT1062__
#include "../../inc/MarlinConfig.h"
#if HAS_SERVOS
#include "Servo.h"
int8_t libServo::attach(const int inPin) {
if (inPin > 0) servoPin = inPin;
return super::attach(servoPin);
}
int8_t libServo::attach(const int inPin, const int inMin, const int inMax) {
if (inPin > 0) servoPin = inPin;
return super::attach(servoPin, inMin, inMax);
}
void libServo::move(const int value) {
constexpr uint16_t servo_delay[] = SERVO_DELAY;
static_assert(COUNT(servo_delay) == NUM_SERVOS, "SERVO_DELAY must be an array NUM_SERVOS long.");
if (attach(0) >= 0) {
write(value);
safe_delay(servo_delay[servoIndex]);
TERN_(DEACTIVATE_SERVOS_AFTER_MOVE, detach());
}
}
void libServo::detach() {
// PWMServo library does not have detach() function
//super::detach();
}
#endif // HAS_SERVOS
#endif // __IMXRT1062__

39
Marlin/src/HAL/TEENSY40_41/Servo.h Normal file
View File

@ -0,0 +1,39 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
#include <PWMServo.h>
// Inherit and expand on core Servo library
class libServo : public PWMServo {
public:
int8_t attach(const int pin);
int8_t attach(const int pin, const int min, const int max);
void move(const int value);
void detach(void);
private:
typedef PWMServo super;
uint8_t servoPin;
uint16_t min_ticks;
uint16_t max_ticks;
uint8_t servoIndex; // Index into the channel data for this servo
};

77
Marlin/src/HAL/TEENSY40_41/eeprom.cpp Normal file
View File

@ -0,0 +1,77 @@
/**
* Marlin 3D Printer Firmware
*
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
* Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com
* Copyright (c) 2015-2016 Nico Tonnhofer wurstnase.reprap@gmail.com
* Copyright (c) 2016 Victor Perez victor_pv@hotmail.com
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#ifdef __IMXRT1062__
#include "../../inc/MarlinConfig.h"
#if USE_WIRED_EEPROM
/**
* PersistentStore for Arduino-style EEPROM interface
* with implementations supplied by the framework.
*/
#include "../shared/eeprom_api.h"
#include <avr/eeprom.h>
#ifndef MARLIN_EEPROM_SIZE
#define MARLIN_EEPROM_SIZE size_t(E2END + 1)
#endif
size_t PersistentStore::capacity() { return MARLIN_EEPROM_SIZE; }
bool PersistentStore::access_start() { return true; }
bool PersistentStore::access_finish() { return true; }
bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, uint16_t *crc) {
while (size--) {
uint8_t * const p = (uint8_t * const)pos;
uint8_t v = *value;
// EEPROM has only ~100,000 write cycles,
// so only write bytes that have changed!
if (v != eeprom_read_byte(p)) {
eeprom_write_byte(p, v);
if (eeprom_read_byte(p) != v) {
SERIAL_ECHO_MSG(STR_ERR_EEPROM_WRITE);
return true;
}
}
crc16(crc, &v, 1);
pos++;
value++;
}
return false;
}
bool PersistentStore::read_data(int &pos, uint8_t* value, size_t size, uint16_t *crc, const bool writing/*=true*/) {
do {
uint8_t c = eeprom_read_byte((uint8_t*)pos);
if (writing) *value = c;
crc16(crc, &c, 1);
pos++;
value++;
} while (--size);
return false;
}
#endif // USE_WIRED_EEPROM
#endif // __IMXRT1062__

66
Marlin/src/HAL/TEENSY40_41/endstop_interrupts.h Normal file
View File

@ -0,0 +1,66 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
/**
* Endstop Interrupts
*
* Without endstop interrupts the endstop pins must be polled continually in
* the temperature-ISR via endstops.update(), most of the time finding no change.
* With this feature endstops.update() is called only when we know that at
* least one endstop has changed state, saving valuable CPU cycles.
*
* This feature only works when all used endstop pins can generate an 'external interrupt'.
*
* Test whether pins issue interrupts on your board by flashing 'pin_interrupt_test.ino'.
* (Located in Marlin/buildroot/share/pin_interrupt_test/pin_interrupt_test.ino)
*/
#include "../../module/endstops.h"
// One ISR for all EXT-Interrupts
void endstop_ISR() { endstops.update(); }
/**
* Endstop interrupts for Due based targets.
* On Due, all pins support external interrupt capability.
*/
void setup_endstop_interrupts() {
#define _ATTACH(P) attachInterrupt(digitalPinToInterrupt(P), endstop_ISR, CHANGE)
TERN_(HAS_X_MAX, _ATTACH(X_MAX_PIN));
TERN_(HAS_X_MIN, _ATTACH(X_MIN_PIN));
TERN_(HAS_Y_MAX, _ATTACH(Y_MAX_PIN));
TERN_(HAS_Y_MIN, _ATTACH(Y_MIN_PIN));
TERN_(HAS_Z_MAX, _ATTACH(Z_MAX_PIN));
TERN_(HAS_Z_MIN, _ATTACH(Z_MIN_PIN));
TERN_(HAS_X2_MAX, _ATTACH(X2_MAX_PIN));
TERN_(HAS_X2_MIN, _ATTACH(X2_MIN_PIN));
TERN_(HAS_Y2_MAX, _ATTACH(Y2_MAX_PIN));
TERN_(HAS_Y2_MIN, _ATTACH(Y2_MIN_PIN));
TERN_(HAS_Z2_MAX, _ATTACH(Z2_MAX_PIN));
TERN_(HAS_Z2_MIN, _ATTACH(Z2_MIN_PIN));
TERN_(HAS_Z3_MAX, _ATTACH(Z3_MAX_PIN));
TERN_(HAS_Z3_MIN, _ATTACH(Z3_MIN_PIN));
TERN_(HAS_Z4_MAX, _ATTACH(Z4_MAX_PIN));
TERN_(HAS_Z4_MIN, _ATTACH(Z4_MIN_PIN));
TERN_(HAS_Z_MIN_PROBE_PIN, _ATTACH(Z_MIN_PROBE_PIN));
}

58
Marlin/src/HAL/TEENSY40_41/fastio.h Normal file
View File

@ -0,0 +1,58 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
* Copyright (c) 2017 Victor Perez
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
/**
* Fast I/O interfaces for Teensy 4
* These use GPIO functions instead of Direct Port Manipulation, as on AVR.
*/
#ifndef PWM
#define PWM OUTPUT
#endif
#define READ(IO) digitalRead(IO)
#define WRITE(IO,V) digitalWrite(IO,V)
#define _GET_MODE(IO) !is_output(IO)
#define _SET_MODE(IO,M) pinMode(IO, M)
#define _SET_OUTPUT(IO) pinMode(IO, OUTPUT) /*!< Output Push Pull Mode & GPIO_NOPULL */
#define OUT_WRITE(IO,V) do{ _SET_OUTPUT(IO); WRITE(IO,V); }while(0)
#define SET_INPUT(IO) _SET_MODE(IO, INPUT) /*!< Input Floating Mode */
#define SET_INPUT_PULLUP(IO) _SET_MODE(IO, INPUT_PULLUP) /*!< Input with Pull-up activation */
#define SET_INPUT_PULLDOWN(IO) _SET_MODE(IO, INPUT_PULLDOWN) /*!< Input with Pull-down activation */
#define SET_OUTPUT(IO) OUT_WRITE(IO, LOW)
#define SET_PWM(IO) _SET_MODE(IO, PWM)
#define TOGGLE(IO) OUT_WRITE(IO, !READ(IO))
#define IS_INPUT(IO) !is_output(IO)
#define IS_OUTPUT(IO) is_output(IO)
#define PWM_PIN(P) digitalPinHasPWM(P)
// digitalRead/Write wrappers
#define extDigitalRead(IO) digitalRead(IO)
#define extDigitalWrite(IO,V) digitalWrite(IO,V)

26
Marlin/src/HAL/TEENSY40_41/inc/Conditionals_LCD.h Normal file
View File

@ -0,0 +1,26 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
#if HAS_SPI_TFT || HAS_FSMC_TFT
#error "Sorry! TFT displays are not available for HAL/TEENSY40_41."
#endif

22
Marlin/src/HAL/TEENSY40_41/inc/Conditionals_adv.h Normal file
View File

@ -0,0 +1,22 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once

26
Marlin/src/HAL/TEENSY40_41/inc/Conditionals_post.h Normal file
View File

@ -0,0 +1,26 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
#if USE_FALLBACK_EEPROM
#define USE_WIRED_EEPROM 1
#endif

38
Marlin/src/HAL/TEENSY40_41/inc/SanityCheck.h Normal file
View File

@ -0,0 +1,38 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
/**
* Test TEENSY41 specific configuration values for errors at compile-time.
*/
#if ENABLED(EMERGENCY_PARSER)
#error "EMERGENCY_PARSER is not yet implemented for Teensy 4.0/4.1. Disable EMERGENCY_PARSER to continue."
#endif
#if ENABLED(FAST_PWM_FAN) || SPINDLE_LASER_FREQUENCY
#error "Features requiring Hardware PWM (FAST_PWM_FAN, SPINDLE_LASER_FREQUENCY) are not yet supported on Teensy 4.0/4.1."
#endif
#if HAS_TMC_SW_SERIAL
#error "TMC220x Software Serial is not supported on this platform."
#endif

146
Marlin/src/HAL/TEENSY40_41/pinsDebug.h Normal file
View File

@ -0,0 +1,146 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
#warning "PINS_DEBUGGING is not fully supported for Teensy 4.0 / 4.1 so 'M43' may cause hangs."
#define NUMBER_PINS_TOTAL NUM_DIGITAL_PINS
#define digitalRead_mod(p) extDigitalRead(p) // AVR digitalRead disabled PWM before it read the pin
#define PRINT_PORT(p)
#define PRINT_ARRAY_NAME(x) do{ sprintf_P(buffer, PSTR("%-" STRINGIFY(MAX_NAME_LENGTH) "s"), pin_array[x].name); SERIAL_ECHO(buffer); }while(0)
#define PRINT_PIN(p) do{ sprintf_P(buffer, PSTR("%02d"), p); SERIAL_ECHO(buffer); }while(0)
#define GET_ARRAY_PIN(p) pin_array[p].pin
#define GET_ARRAY_IS_DIGITAL(p) pin_array[p].is_digital
#define VALID_PIN(pin) (pin >= 0 && pin < (int8_t)NUMBER_PINS_TOTAL ? 1 : 0)
#define DIGITAL_PIN_TO_ANALOG_PIN(p) int(p - analogInputToDigitalPin(0))
#define IS_ANALOG(P) ((P) >= analogInputToDigitalPin(0) && (P) <= analogInputToDigitalPin(13)) || ((P) >= analogInputToDigitalPin(14) && (P) <= analogInputToDigitalPin(17))
#define pwm_status(pin) HAL_pwm_status(pin)
#define GET_PINMODE(PIN) (VALID_PIN(pin) && IS_OUTPUT(pin))
#define MULTI_NAME_PAD 16 // space needed to be pretty if not first name assigned to a pin
struct pwm_pin_info_struct {
uint8_t type; // 0=no pwm, 1=flexpwm, 2=quad
uint8_t module; // 0-3, 0-3
uint8_t channel; // 0=X, 1=A, 2=B
uint8_t muxval; //
};
#define M(a, b) ((((a) - 1) << 4) | (b))
const struct pwm_pin_info_struct pwm_pin_info[] = {
{1, M(1, 1), 0, 4}, // FlexPWM1_1_X 0 // AD_B0_03
{1, M(1, 0), 0, 4}, // FlexPWM1_0_X 1 // AD_B0_02
{1, M(4, 2), 1, 1}, // FlexPWM4_2_A 2 // EMC_04
{1, M(4, 2), 2, 1}, // FlexPWM4_2_B 3 // EMC_05
{1, M(2, 0), 1, 1}, // FlexPWM2_0_A 4 // EMC_06
{1, M(2, 1), 1, 1}, // FlexPWM2_1_A 5 // EMC_08
{1, M(2, 2), 1, 2}, // FlexPWM2_2_A 6 // B0_10
{1, M(1, 3), 2, 6}, // FlexPWM1_3_B 7 // B1_01
{1, M(1, 3), 1, 6}, // FlexPWM1_3_A 8 // B1_00
{1, M(2, 2), 2, 2}, // FlexPWM2_2_B 9 // B0_11
{2, M(1, 0), 0, 1}, // QuadTimer1_0 10 // B0_00
{2, M(1, 2), 0, 1}, // QuadTimer1_2 11 // B0_02
{2, M(1, 1), 0, 1}, // QuadTimer1_1 12 // B0_01
{2, M(2, 0), 0, 1}, // QuadTimer2_0 13 // B0_03
{2, M(3, 2), 0, 1}, // QuadTimer3_2 14 // AD_B1_02
{2, M(3, 3), 0, 1}, // QuadTimer3_3 15 // AD_B1_03
{0, M(1, 0), 0, 0},
{0, M(1, 0), 0, 0},
{2, M(3, 1), 0, 1}, // QuadTimer3_1 18 // AD_B1_01
{2, M(3, 0), 0, 1}, // QuadTimer3_0 19 // AD_B1_00
{0, M(1, 0), 0, 0},
{0, M(1, 0), 0, 0},
{1, M(4, 0), 1, 1}, // FlexPWM4_0_A 22 // AD_B1_08
{1, M(4, 1), 1, 1}, // FlexPWM4_1_A 23 // AD_B1_09
{1, M(1, 2), 0, 4}, // FlexPWM1_2_X 24 // AD_B0_12
{1, M(1, 3), 0, 4}, // FlexPWM1_3_X 25 // AD_B0_13
{0, M(1, 0), 0, 0},
{0, M(1, 0), 0, 0},
{1, M(3, 1), 2, 1}, // FlexPWM3_1_B 28 // EMC_32
{1, M(3, 1), 1, 1}, // FlexPWM3_1_A 29 // EMC_31
{0, M(1, 0), 0, 0},
{0, M(1, 0), 0, 0},
{0, M(1, 0), 0, 0},
{1, M(2, 0), 2, 1}, // FlexPWM2_0_B 33 // EMC_07
#ifdef ARDUINO_TEENSY40
{1, M(1, 1), 2, 1}, // FlexPWM1_1_B 34 // SD_B0_03
{1, M(1, 1), 1, 1}, // FlexPWM1_1_A 35 // SD_B0_02
{1, M(1, 0), 2, 1}, // FlexPWM1_0_B 36 // SD_B0_01
{1, M(1, 0), 1, 1}, // FlexPWM1_0_A 37 // SD_B0_00
{1, M(1, 2), 2, 1}, // FlexPWM1_2_B 38 // SD_B0_05
{1, M(1, 2), 1, 1}, // FlexPWM1_2_A 39 // SD_B0_04
#endif
#ifdef ARDUINO_TEENSY41
{0, M(1, 0), 0, 0},
{0, M(1, 0), 0, 0},
{1, M(2, 3), 1, 6}, // FlexPWM2_3_A 36 // B1_00
{1, M(2, 3), 2, 6}, // FlexPWM2_3_B 37 // B1_01
{0, M(1, 0), 0, 0},
{0, M(1, 0), 0, 0},
{0, M(1, 0), 0, 0},
{0, M(1, 0), 0, 0},
{1, M(1, 1), 2, 1}, // FlexPWM1_1_B 42 // SD_B0_03
{1, M(1, 1), 1, 1}, // FlexPWM1_1_A 43 // SD_B0_02
{1, M(1, 0), 2, 1}, // FlexPWM1_0_B 44 // SD_B0_01
{1, M(1, 0), 1, 1}, // FlexPWM1_0_A 45 // SD_B0_00
{1, M(1, 2), 2, 1}, // FlexPWM1_2_B 46 // SD_B0_05
{1, M(1, 2), 1, 1}, // FlexPWM1_2_A 47 // SD_B0_04
{0, M(1, 0), 0, 0}, // duplicate FlexPWM1_0_B
{0, M(1, 0), 0, 0}, // duplicate FlexPWM1_2_A
{0, M(1, 0), 0, 0}, // duplicate FlexPWM1_2_B
{1, M(3, 3), 2, 1}, // FlexPWM3_3_B 51 // EMC_22
{0, M(1, 0), 0, 0}, // duplicate FlexPWM1_1_B
{0, M(1, 0), 0, 0}, // duplicate FlexPWM1_1_A
{1, M(3, 0), 1, 1}, // FlexPWM3_0_A 53 // EMC_29
#endif
};
void HAL_print_analog_pin(char buffer[], int8_t pin) {
if (pin <= 23) sprintf_P(buffer, PSTR("(A%2d) "), int(pin - 14));
else if (pin <= 41) sprintf_P(buffer, PSTR("(A%2d) "), int(pin - 24));
}
void HAL_analog_pin_state(char buffer[], int8_t pin) {
if (pin <= 23) sprintf_P(buffer, PSTR("Analog in =% 5d"), analogRead(pin - 14));
else if (pin <= 41) sprintf_P(buffer, PSTR("Analog in =% 5d"), analogRead(pin - 24));
}
#define PWM_PRINT(V) do{ sprintf_P(buffer, PSTR("PWM: %4d"), V); SERIAL_ECHO(buffer); }while(0)
/**
* Print a pin's PWM status.
* Return true if it's currently a PWM pin.
*/
bool HAL_pwm_status(int8_t pin) {
char buffer[20]; // for the sprintf statements
const struct pwm_pin_info_struct *info;
if (pin >= CORE_NUM_DIGITAL) return 0;
info = pwm_pin_info + pin;
if (info->type == 0) return 0;
/* TODO decode pwm value from timers */
// for now just indicate if output is set as pwm
PWM_PRINT(*(portConfigRegister(pin)) == info->muxval);
return (*(portConfigRegister(pin)) == info->muxval);
}
static void pwm_details(uint8_t pin) { /* TODO */ }

27
Marlin/src/HAL/TEENSY40_41/spi_pins.h Normal file
View File

@ -0,0 +1,27 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
#define SCK_PIN 13
#define MISO_PIN 12
#define MOSI_PIN 11
#define SS_PIN 20 // SDSS // A.28, A.29, B.21, C.26, C.29

114
Marlin/src/HAL/TEENSY40_41/timers.cpp Normal file
View File

@ -0,0 +1,114 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
/**
* Teensy4.0/4.1 (__IMXRT1062__)
*/
#ifdef __IMXRT1062__
#include "../../inc/MarlinConfig.h"
void HAL_timer_start(const uint8_t timer_num, const uint32_t frequency) {
switch (timer_num) {
case 0:
CCM_CSCMR1 &= ~CCM_CSCMR1_PERCLK_CLK_SEL; // turn off 24mhz mode
CCM_CCGR1 |= CCM_CCGR1_GPT1_BUS(CCM_CCGR_ON);
GPT1_CR = 0; // disable timer
GPT1_SR = 0x3F; // clear all prior status
GPT1_PR = GPT1_TIMER_PRESCALE - 1;
GPT1_CR |= GPT_CR_CLKSRC(1); //clock selection #1 (peripheral clock = 150 MHz)
GPT1_CR |= GPT_CR_ENMOD; //reset count to zero before enabling
GPT1_CR |= GPT_CR_OM1(1); // toggle mode
GPT1_OCR1 = (GPT1_TIMER_RATE / frequency) -1; // Initial compare value
GPT1_IR = GPT_IR_OF1IE; // Compare3 value
GPT1_CR |= GPT_CR_EN; //enable GPT2 counting at 150 MHz
OUT_WRITE(15, HIGH);
attachInterruptVector(IRQ_GPT1, &stepTC_Handler);
NVIC_SET_PRIORITY(IRQ_GPT1, 16);
break;
case 1:
CCM_CSCMR1 &= ~CCM_CSCMR1_PERCLK_CLK_SEL; // turn off 24mhz mode
CCM_CCGR0 |= CCM_CCGR0_GPT2_BUS(CCM_CCGR_ON);
GPT2_CR = 0; // disable timer
GPT2_SR = 0x3F; // clear all prior status
GPT2_PR = GPT2_TIMER_PRESCALE - 1;
GPT2_CR |= GPT_CR_CLKSRC(1); //clock selection #1 (peripheral clock = 150 MHz)
GPT2_CR |= GPT_CR_ENMOD; //reset count to zero before enabling
GPT2_CR |= GPT_CR_OM1(1); // toggle mode
GPT2_OCR1 = (GPT2_TIMER_RATE / frequency) -1; // Initial compare value
GPT2_IR = GPT_IR_OF1IE; // Compare3 value
GPT2_CR |= GPT_CR_EN; //enable GPT2 counting at 150 MHz
OUT_WRITE(14, HIGH);
attachInterruptVector(IRQ_GPT2, &tempTC_Handler);
NVIC_SET_PRIORITY(IRQ_GPT2, 32);
break;
}
}
void HAL_timer_enable_interrupt(const uint8_t timer_num) {
switch (timer_num) {
case 0:
NVIC_ENABLE_IRQ(IRQ_GPT1);
break;
case 1:
NVIC_ENABLE_IRQ(IRQ_GPT2);
break;
}
}
void HAL_timer_disable_interrupt(const uint8_t timer_num) {
switch (timer_num) {
case 0: NVIC_DISABLE_IRQ(IRQ_GPT1); break;
case 1: NVIC_DISABLE_IRQ(IRQ_GPT2); break;
}
// We NEED memory barriers to ensure Interrupts are actually disabled!
// ( https://dzone.com/articles/nvic-disabling-interrupts-on-arm-cortex-m-and-the )
asm volatile("dsb");
}
bool HAL_timer_interrupt_enabled(const uint8_t timer_num) {
switch (timer_num) {
case 0: return (NVIC_IS_ENABLED(IRQ_GPT1));
case 1: return (NVIC_IS_ENABLED(IRQ_GPT2));
}
return false;
}
void HAL_timer_isr_prologue(const uint8_t timer_num) {
switch (timer_num) {
case 0:
GPT1_SR = GPT_IR_OF1IE; // clear OF3 bit
break;
case 1:
GPT2_SR = GPT_IR_OF1IE; // clear OF3 bit
break;
}
asm volatile("dsb");
}
#endif // __IMXRT1062__

120
Marlin/src/HAL/TEENSY40_41/timers.h Normal file
View File

@ -0,0 +1,120 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
* Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com
* Copyright (c) 2015-2016 Nico Tonnhofer wurstnase.reprap@gmail.com
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
/**
* Description: HAL for
* Teensy4.0/4.1 (__IMXRT1062__)
*/
#include <stdint.h>
// ------------------------
// Defines
// ------------------------
#define FORCE_INLINE __attribute__((always_inline)) inline
typedef uint32_t hal_timer_t;
#define HAL_TIMER_TYPE_MAX 0xFFFFFFFE
#define GPT_TIMER_RATE F_BUS_ACTUAL // 150MHz
#define GPT1_TIMER_PRESCALE 2
#define GPT2_TIMER_PRESCALE 10
#define GPT1_TIMER_RATE (GPT_TIMER_RATE / GPT1_TIMER_PRESCALE) // 75MHz
#define GPT2_TIMER_RATE (GPT_TIMER_RATE / GPT2_TIMER_PRESCALE) // 15MHz
#ifndef STEP_TIMER_NUM
#define STEP_TIMER_NUM 0 // Timer Index for Stepper
#endif
#ifndef PULSE_TIMER_NUM
#define PULSE_TIMER_NUM STEP_TIMER_NUM
#endif
#ifndef TEMP_TIMER_NUM
#define TEMP_TIMER_NUM 1 // Timer Index for Temperature
#endif
#define TEMP_TIMER_RATE 1000000
#define TEMP_TIMER_FREQUENCY 1000
#define STEPPER_TIMER_RATE GPT1_TIMER_RATE
#define STEPPER_TIMER_TICKS_PER_US ((STEPPER_TIMER_RATE) / 1000000)
#define STEPPER_TIMER_PRESCALE ((GPT_TIMER_RATE / 1000000) / STEPPER_TIMER_TICKS_PER_US)
#define PULSE_TIMER_RATE STEPPER_TIMER_RATE // frequency of pulse timer
#define PULSE_TIMER_PRESCALE STEPPER_TIMER_PRESCALE
#define PULSE_TIMER_TICKS_PER_US STEPPER_TIMER_TICKS_PER_US
#define ENABLE_STEPPER_DRIVER_INTERRUPT() HAL_timer_enable_interrupt(STEP_TIMER_NUM)
#define DISABLE_STEPPER_DRIVER_INTERRUPT() HAL_timer_disable_interrupt(STEP_TIMER_NUM)
#define STEPPER_ISR_ENABLED() HAL_timer_interrupt_enabled(STEP_TIMER_NUM)
#define ENABLE_TEMPERATURE_INTERRUPT() HAL_timer_enable_interrupt(TEMP_TIMER_NUM)
#define DISABLE_TEMPERATURE_INTERRUPT() HAL_timer_disable_interrupt(TEMP_TIMER_NUM)
#ifndef HAL_STEP_TIMER_ISR
#define HAL_STEP_TIMER_ISR() extern "C" void stepTC_Handler() // GPT1_Handler()
#endif
#ifndef HAL_TEMP_TIMER_ISR
#define HAL_TEMP_TIMER_ISR() extern "C" void tempTC_Handler() // GPT2_Handler()
#endif
extern "C" void stepTC_Handler();
extern "C" void tempTC_Handler();
void HAL_timer_start(const uint8_t timer_num, const uint32_t frequency);
FORCE_INLINE static void HAL_timer_set_compare(const uint8_t timer_num, const hal_timer_t compare) {
switch (timer_num) {
case 0:
GPT1_OCR1 = compare - 1;
break;
case 1:
GPT2_OCR1 = compare - 1;
break;
}
}
FORCE_INLINE static hal_timer_t HAL_timer_get_compare(const uint8_t timer_num) {
switch (timer_num) {
case 0: return GPT1_OCR1;
case 1: return GPT2_OCR1;
}
return 0;
}
FORCE_INLINE static hal_timer_t HAL_timer_get_count(const uint8_t timer_num) {
switch (timer_num) {
case 0: return GPT1_CNT;
case 1: return GPT2_CNT;
}
return 0;
}
void HAL_timer_enable_interrupt(const uint8_t timer_num);
void HAL_timer_disable_interrupt(const uint8_t timer_num);
bool HAL_timer_interrupt_enabled(const uint8_t timer_num);
void HAL_timer_isr_prologue(const uint8_t timer_num);
//void HAL_timer_isr_epilogue(const uint8_t timer_num) {}
#define HAL_timer_isr_epilogue(TIMER_NUM)

52
Marlin/src/HAL/TEENSY40_41/watchdog.cpp Normal file
View File

@ -0,0 +1,52 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#ifdef __IMXRT1062__
#include "../../inc/MarlinConfig.h"
#if ENABLED(USE_WATCHDOG)
#include "watchdog.h"
// 4 seconds timeout
#define WDTO 4 //seconds
uint8_t timeoutval = (WDTO - 0.5f) / 0.5f;
void watchdog_init() {
CCM_CCGR3 |= CCM_CCGR3_WDOG1(3); // enable WDOG1 clocks
WDOG1_WMCR = 0; // disable power down PDE
WDOG1_WCR |= WDOG_WCR_SRS | WDOG_WCR_WT(timeoutval);
WDOG1_WCR |= WDOG_WCR_WDE | WDOG_WCR_WDT | WDOG_WCR_SRE;
}
void HAL_watchdog_refresh() {
// Watchdog refresh sequence
WDOG1_WSR = 0x5555;
WDOG1_WSR = 0xAAAA;
}
#endif // USE_WATCHDOG
#endif // __IMXRT1062__

30
Marlin/src/HAL/TEENSY40_41/watchdog.h Normal file
View File

@ -0,0 +1,30 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
/**
* Watchdog for Teensy4.0/4.1 (__IMXRT1062__)
*/
void watchdog_init();
void HAL_watchdog_refresh();

2
Marlin/src/HAL/platforms.h
View File

@ -31,6 +31,8 @@
#define HAL_PATH(PATH, NAME) XSTR(PATH/TEENSY31_32/NAME)
#elif defined(__MK64FX512__) || defined(__MK66FX1M0__)
#define HAL_PATH(PATH, NAME) XSTR(PATH/TEENSY35_36/NAME)
#elif defined(__IMXRT1062__)
#define HAL_PATH(PATH, NAME) XSTR(PATH/TEENSY40_41/NAME)
#elif defined(TARGET_LPC1768)
#define HAL_PATH(PATH, NAME) XSTR(PATH/LPC1768/NAME)
#elif defined(__STM32F1__) || defined(TARGET_STM32F1)

2
Marlin/src/HAL/shared/HAL_ST7920.h
View File

@ -27,7 +27,7 @@
* (bypassing U8G), it will allow the LIGHTWEIGHT_UI to operate.
*/
#if BOTH(HAS_GRAPHICAL_LCD, LIGHTWEIGHT_UI)
#if BOTH(HAS_MARLINUI_U8GLIB, LIGHTWEIGHT_UI)
void ST7920_cs();
void ST7920_ncs();
void ST7920_set_cmd();

57
Marlin/src/HAL/shared/backtrace/unwmemaccess.cpp
View File

@ -20,6 +20,7 @@
/* Validate address */
#ifdef ARDUINO_ARCH_SAM
// For DUE, valid address ranges are
// SRAM (0x20070000 - 0x20088000) (96kb)
// FLASH (0x00080000 - 0x00100000) (512kb)
@ -28,9 +29,9 @@
#define END_SRAM_ADDR 0x20088000
#define START_FLASH_ADDR 0x00080000
#define END_FLASH_ADDR 0x00100000
#endif
#ifdef TARGET_LPC1768
#elif defined(TARGET_LPC1768)
// For LPC1769:
// SRAM (0x10000000 - 0x10008000) (32kb)
// FLASH (0x00000000 - 0x00080000) (512kb)
@ -39,9 +40,9 @@
#define END_SRAM_ADDR 0x10008000
#define START_FLASH_ADDR 0x00000000
#define END_FLASH_ADDR 0x00080000
#endif
#if 0
#elif 0
// For STM32F103CBT6
// SRAM (0x20000000 - 0x20005000) (20kb)
// FLASH (0x00000000 - 0x00020000) (128kb)
@ -50,9 +51,9 @@
#define END_SRAM_ADDR 0x20005000
#define START_FLASH_ADDR 0x00000000
#define END_FLASH_ADDR 0x00020000
#endif
#if defined(__STM32F1__) || defined(STM32F1xx) || defined(STM32F0xx)
#elif defined(__STM32F1__) || defined(STM32F1xx) || defined(STM32F0xx)
// For STM32F103ZET6/STM32F103VET6/STM32F0xx
// SRAM (0x20000000 - 0x20010000) (64kb)
// FLASH (0x00000000 - 0x00080000) (512kb)
@ -61,9 +62,9 @@
#define END_SRAM_ADDR 0x20010000
#define START_FLASH_ADDR 0x00000000
#define END_FLASH_ADDR 0x00080000
#endif
#if defined(STM32F4) || defined(STM32F4xx)
#elif defined(STM32F4) || defined(STM32F4xx)
// For STM32F407VET
// SRAM (0x20000000 - 0x20030000) (192kb)
// FLASH (0x08000000 - 0x08080000) (512kb)
@ -72,9 +73,9 @@
#define END_SRAM_ADDR 0x20030000
#define START_FLASH_ADDR 0x08000000
#define END_FLASH_ADDR 0x08080000
#endif
#if MB(THE_BORG)
#elif MB(THE_BORG)
// For STM32F765 in BORG
// SRAM (0x20000000 - 0x20080000) (512kb)
// FLASH (0x08000000 - 0x08100000) (1024kb)
@ -83,9 +84,9 @@
#define END_SRAM_ADDR 0x20080000
#define START_FLASH_ADDR 0x08000000
#define END_FLASH_ADDR 0x08100000
#endif
#if MB(REMRAM_V1)
#elif MB(REMRAM_V1)
// For STM32F765VI in RemRam v1
// SRAM (0x20000000 - 0x20080000) (512kb)
// FLASH (0x08000000 - 0x08200000) (2048kb)
@ -94,9 +95,9 @@
#define END_SRAM_ADDR 0x20080000
#define START_FLASH_ADDR 0x08000000
#define END_FLASH_ADDR 0x08200000
#endif
#ifdef __MK20DX256__
#elif defined(__MK20DX256__)
// For MK20DX256 in TEENSY 3.1 or TEENSY 3.2
// SRAM (0x1FFF8000 - 0x20008000) (64kb)
// FLASH (0x00000000 - 0x00040000) (256kb)
@ -105,9 +106,9 @@
#define END_SRAM_ADDR 0x20008000
#define START_FLASH_ADDR 0x00000000
#define END_FLASH_ADDR 0x00040000
#endif
#ifdef __MK64FX512__
#elif defined(__MK64FX512__)
// For MK64FX512 in TEENSY 3.5
// SRAM (0x1FFF0000 - 0x20020000) (192kb)
// FLASH (0x00000000 - 0x00080000) (512kb)
@ -116,9 +117,9 @@
#define END_SRAM_ADDR 0x20020000
#define START_FLASH_ADDR 0x00000000
#define END_FLASH_ADDR 0x00080000
#endif
#ifdef __MK66FX1M0__
#elif defined(__MK66FX1M0__)
// For MK66FX1M0 in TEENSY 3.6
// SRAM (0x1FFF0000 - 0x20030000) (256kb)
// FLASH (0x00000000 - 0x00140000) (1.25Mb)
@ -127,9 +128,22 @@
#define END_SRAM_ADDR 0x20030000
#define START_FLASH_ADDR 0x00000000
#define END_FLASH_ADDR 0x00140000
#endif
#ifdef __SAMD51P20A__
#elif defined(__IMXRT1062__)
// For IMXRT1062 in TEENSY 4.0/4/1
// ITCM (rwx): ORIGIN = 0x00000000, LENGTH = 512K
// DTCM (rwx): ORIGIN = 0x20000000, LENGTH = 512K
// RAM (rwx): ORIGIN = 0x20200000, LENGTH = 512K
// FLASH (rwx): ORIGIN = 0x60000000, LENGTH = 1984K
//
#define START_SRAM_ADDR 0x00000000
#define END_SRAM_ADDR 0x20280000
#define START_FLASH_ADDR 0x60000000
#define END_FLASH_ADDR 0x601F0000
#elif defined(__SAMD51P20A__)
// For SAMD51x20, valid address ranges are
// SRAM (0x20000000 - 0x20040000) (256kb)
// FLASH (0x00000000 - 0x00100000) (1024kb)
@ -138,6 +152,7 @@
#define END_SRAM_ADDR 0x20040000
#define START_FLASH_ADDR 0x00000000
#define END_FLASH_ADDR 0x00100000
#endif
static bool validate_addr(uint32_t addr) {
@ -177,4 +192,4 @@ bool UnwReadB(const uint32_t a, uint8_t *v) {
return true;
}
#endif
#endif // __arm__ || __thumb__

1
Marlin/src/HAL/shared/servo.cpp
View File

@ -48,7 +48,6 @@
* readMicroseconds() - Get the last-written servo pulse width in microseconds.
* attached() - Return true if a servo is attached.
* detach() - Stop an attached servo from pulsing its i/o pin.
*
*/
#include "../../inc/MarlinConfig.h"

3
Marlin/src/HAL/shared/servo.h
View File

@ -41,7 +41,6 @@
*/
/**
*
* A servo is activated by creating an instance of the Servo class passing the desired pin to the attach() method.
* The servos are pulsed in the background using the value most recently written using the write() method
*
@ -71,6 +70,8 @@
#include "../TEENSY31_32/Servo.h"
#elif IS_TEENSY35 || IS_TEENSY36
#include "../TEENSY35_36/Servo.h"
#elif IS_TEENSY40 || IS_TEENSY41
#include "../TEENSY40_41/Servo.h"
#elif defined(TARGET_LPC1768)
#include "../LPC1768/Servo.h"
#elif defined(__STM32F1__) || defined(TARGET_STM32F1)

82
Marlin/src/MarlinCore.cpp
View File

@ -72,9 +72,9 @@
#endif
#if ENABLED(DWIN_CREALITY_LCD)
#include "lcd/dwin/dwin.h"
#include "lcd/dwin/e3v2/dwin.h"
#include "lcd/dwin/dwin_lcd.h"
#include "lcd/dwin/rotary_encoder.h"
#include "lcd/dwin/e3v2/rotary_encoder.h"
#endif
#if ENABLED(IIC_BL24CXX_EEPROM)
@ -796,6 +796,10 @@ void kill(PGM_P const lcd_error/*=nullptr*/, PGM_P const lcd_component/*=nullptr
UNUSED(lcd_component);
#endif
#if HAS_TFT_LVGL_UI
lv_draw_error_message(lcd_error);
#endif
#ifdef ACTION_ON_KILL
host_action_kill();
#endif
@ -863,6 +867,57 @@ void stop() {
}
}
inline void tmc_standby_setup() {
#if PIN_EXISTS(X_STDBY)
SET_INPUT_PULLDOWN(X_STDBY_PIN);
#endif
#if PIN_EXISTS(X2_STDBY)
SET_INPUT_PULLDOWN(X2_STDBY_PIN);
#endif
#if PIN_EXISTS(Y_STDBY)
SET_INPUT_PULLDOWN(Y_STDBY_PIN);
#endif
#if PIN_EXISTS(Y2_STDBY)
SET_INPUT_PULLDOWN(Y2_STDBY_PIN);
#endif
#if PIN_EXISTS(Z_STDBY)
SET_INPUT_PULLDOWN(Z_STDBY_PIN);
#endif
#if PIN_EXISTS(Z2_STDBY)
SET_INPUT_PULLDOWN(Z2_STDBY_PIN);
#endif
#if PIN_EXISTS(Z3_STDBY)
SET_INPUT_PULLDOWN(Z3_STDBY_PIN);
#endif
#if PIN_EXISTS(Z4_STDBY)
SET_INPUT_PULLDOWN(Z4_STDBY_PIN);
#endif
#if PIN_EXISTS(E0_STDBY)
SET_INPUT_PULLDOWN(E0_STDBY_PIN);
#endif
#if PIN_EXISTS(E1_STDBY)
SET_INPUT_PULLDOWN(E1_STDBY_PIN);
#endif
#if PIN_EXISTS(E2_STDBY)
SET_INPUT_PULLDOWN(E2_STDBY_PIN);
#endif
#if PIN_EXISTS(E3_STDBY)
SET_INPUT_PULLDOWN(E3_STDBY_PIN);
#endif
#if PIN_EXISTS(E4_STDBY)
SET_INPUT_PULLDOWN(E4_STDBY_PIN);
#endif
#if PIN_EXISTS(E5_STDBY)
SET_INPUT_PULLDOWN(E5_STDBY_PIN);
#endif
#if PIN_EXISTS(E6_STDBY)
SET_INPUT_PULLDOWN(E6_STDBY_PIN);
#endif
#if PIN_EXISTS(E7_STDBY)
SET_INPUT_PULLDOWN(E7_STDBY_PIN);
#endif
}
/**
* Marlin entry-point: Set up before the program loop
* - Set up the kill pin, filament runout, power hold
@ -884,6 +939,8 @@ void stop() {
*/
void setup() {
tmc_standby_setup(); // TMC Low Power Standby pins must be set early or they're not usable
#if ENABLED(MARLIN_DEV_MODE)
auto log_current_ms = [&](PGM_P const msg) {
SERIAL_ECHO_START();
@ -908,7 +965,6 @@ void setup() {
#endif
#endif
#if NUM_SERIAL > 0
MYSERIAL0.begin(BAUDRATE);
uint32_t serial_connect_timeout = millis() + 1000UL;
while (!MYSERIAL0 && PENDING(millis(), serial_connect_timeout)) { /*nada*/ }
@ -918,6 +974,12 @@ void setup() {
while (!MYSERIAL1 && PENDING(millis(), serial_connect_timeout)) { /*nada*/ }
#endif
SERIAL_ECHO_MSG("start");
#if BOTH(HAS_TFT_LVGL_UI, USE_WIFI_FUNCTION)
mks_esp_wifi_init();
WIFISERIAL.begin(WIFI_BAUDRATE);
serial_connect_timeout = millis() + 1000UL;
while (/*!WIFISERIAL && */PENDING(millis(), serial_connect_timeout)) { /*nada*/ }
#endif
SETUP_RUN(HAL_init());
@ -977,18 +1039,14 @@ void setup() {
SERIAL_CHAR(' ');
SERIAL_ECHOLNPGM(SHORT_BUILD_VERSION);
SERIAL_EOL();
#if defined(STRING_DISTRIBUTION_DATE) && defined(STRING_CONFIG_H_AUTHOR)
SERIAL_ECHO_MSG(
STR_CONFIGURATION_VER
STRING_DISTRIBUTION_DATE
STR_AUTHOR STRING_CONFIG_H_AUTHOR
" Last Updated: " STRING_DISTRIBUTION_DATE
" | Author: " STRING_CONFIG_H_AUTHOR
);
SERIAL_ECHO_MSG("Compiled: " __DATE__);
#endif
SERIAL_ECHO_START();
SERIAL_ECHOLNPAIR(STR_FREE_MEMORY, freeMemory(), STR_PLANNER_BUFFER_BYTES, (int)sizeof(block_t) * (BLOCK_BUFFER_SIZE));
SERIAL_ECHO_MSG("Compiled: " __DATE__);
SERIAL_ECHO_MSG(STR_FREE_MEMORY, freeMemory(), STR_PLANNER_BUFFER_BYTES, (int)sizeof(block_t) * (BLOCK_BUFFER_SIZE));
// Set up LEDs early
#if HAS_COLOR_LEDS
@ -1014,7 +1072,7 @@ void setup() {
DWIN_UpdateLCD(); // Show bootscreen (first image)
#else
SETUP_RUN(ui.init());
#if HAS_SPI_LCD && ENABLED(SHOW_BOOTSCREEN)
#if HAS_WIRED_LCD && ENABLED(SHOW_BOOTSCREEN)
SETUP_RUN(ui.show_bootscreen());
#endif
SETUP_RUN(ui.reset_status()); // Load welcome message early. (Retained if no errors exist.)

Some files were not shown because too many files have changed in this diff Show More