✨ BTT SKR Mini E3 V3.0.1 (#24722)
This commit is contained in:
ellensp
Scott Lahteine
parent
38b3105900
commit
aabd3e9e19
@ -329,45 +329,46 @@
|
||||
#define BOARD_BTT_SKR_MINI_E3_V1_2 4025 // BigTreeTech SKR Mini E3 V1.2 (STM32F103RC)
|
||||
#define BOARD_BTT_SKR_MINI_E3_V2_0 4026 // BigTreeTech SKR Mini E3 V2.0 (STM32F103RC / STM32F103RE)
|
||||
#define BOARD_BTT_SKR_MINI_E3_V3_0 4027 // BigTreeTech SKR Mini E3 V3.0 (STM32G0B1RE)
|
||||
#define BOARD_BTT_SKR_MINI_MZ_V1_0 4028 // BigTreeTech SKR Mini MZ V1.0 (STM32F103RC)
|
||||
#define BOARD_BTT_SKR_E3_DIP 4029 // BigTreeTech SKR E3 DIP V1.0 (STM32F103RC / STM32F103RE)
|
||||
#define BOARD_BTT_SKR_CR6 4030 // BigTreeTech SKR CR6 v1.0 (STM32F103RE)
|
||||
#define BOARD_JGAURORA_A5S_A1 4031 // JGAurora A5S A1 (STM32F103ZE)
|
||||
#define BOARD_FYSETC_AIO_II 4032 // FYSETC AIO_II (STM32F103RC)
|
||||
#define BOARD_FYSETC_CHEETAH 4033 // FYSETC Cheetah (STM32F103RC)
|
||||
#define BOARD_FYSETC_CHEETAH_V12 4034 // FYSETC Cheetah V1.2 (STM32F103RC)
|
||||
#define BOARD_LONGER3D_LK 4035 // Longer3D LK1/2 - Alfawise U20/U20+/U30 (STM32F103VE)
|
||||
#define BOARD_CCROBOT_MEEB_3DP 4036 // ccrobot-online.com MEEB_3DP (STM32F103RC)
|
||||
#define BOARD_CHITU3D_V5 4037 // Chitu3D TronXY X5SA V5 Board (STM32F103ZE)
|
||||
#define BOARD_CHITU3D_V6 4038 // Chitu3D TronXY X5SA V6 Board (STM32F103ZE)
|
||||
#define BOARD_CHITU3D_V9 4039 // Chitu3D TronXY X5SA V9 Board (STM32F103ZE)
|
||||
#define BOARD_CREALITY_V4 4040 // Creality v4.x (STM32F103RC / STM32F103RE)
|
||||
#define BOARD_CREALITY_V422 4041 // Creality v4.2.2 (STM32F103RC / STM32F103RE)
|
||||
#define BOARD_CREALITY_V423 4042 // Creality v4.2.3 (STM32F103RC / STM32F103RE)
|
||||
#define BOARD_CREALITY_V425 4043 // Creality v4.2.5 (STM32F103RC / STM32F103RE)
|
||||
#define BOARD_CREALITY_V427 4044 // Creality v4.2.7 (STM32F103RC / STM32F103RE)
|
||||
#define BOARD_CREALITY_V4210 4045 // Creality v4.2.10 (STM32F103RC / STM32F103RE) as found in the CR-30
|
||||
#define BOARD_CREALITY_V431 4046 // Creality v4.3.1 (STM32F103RC / STM32F103RE)
|
||||
#define BOARD_CREALITY_V431_A 4047 // Creality v4.3.1a (STM32F103RC / STM32F103RE)
|
||||
#define BOARD_CREALITY_V431_B 4048 // Creality v4.3.1b (STM32F103RC / STM32F103RE)
|
||||
#define BOARD_CREALITY_V431_C 4049 // Creality v4.3.1c (STM32F103RC / STM32F103RE)
|
||||
#define BOARD_CREALITY_V431_D 4050 // Creality v4.3.1d (STM32F103RC / STM32F103RE)
|
||||
#define BOARD_CREALITY_V452 4051 // Creality v4.5.2 (STM32F103RC / STM32F103RE)
|
||||
#define BOARD_CREALITY_V453 4052 // Creality v4.5.3 (STM32F103RC / STM32F103RE)
|
||||
#define BOARD_CREALITY_V24S1 4053 // Creality v2.4.S1 (STM32F103RC / STM32F103RE) v101 as found in the Ender-7
|
||||
#define BOARD_CREALITY_V24S1_301 4054 // Creality v2.4.S1_301 (STM32F103RC / STM32F103RE) v301 as found in the Ender-3 S1
|
||||
#define BOARD_CREALITY_V25S1 4055 // Creality v2.5.S1 (STM32F103RE) as found in the CR-10 Smart Pro
|
||||
#define BOARD_TRIGORILLA_PRO 4056 // Trigorilla Pro (STM32F103ZE)
|
||||
#define BOARD_FLY_MINI 4057 // FLYmaker FLY MINI (STM32F103RC)
|
||||
#define BOARD_FLSUN_HISPEED 4058 // FLSUN HiSpeedV1 (STM32F103VE)
|
||||
#define BOARD_BEAST 4059 // STM32F103RE Libmaple-based controller
|
||||
#define BOARD_MINGDA_MPX_ARM_MINI 4060 // STM32F103ZE Mingda MD-16
|
||||
#define BOARD_GTM32_PRO_VD 4061 // STM32F103VE controller
|
||||
#define BOARD_ZONESTAR_ZM3E2 4062 // Zonestar ZM3E2 (STM32F103RC)
|
||||
#define BOARD_ZONESTAR_ZM3E4 4063 // Zonestar ZM3E4 V1 (STM32F103VC)
|
||||
#define BOARD_ZONESTAR_ZM3E4V2 4064 // Zonestar ZM3E4 V2 (STM32F103VC)
|
||||
#define BOARD_ERYONE_ERY32_MINI 4065 // Eryone Ery32 mini (STM32F103VE)
|
||||
#define BOARD_PANDA_PI_V29 4066 // Panda Pi V2.9 - Standalone (STM32F103RC)
|
||||
#define BOARD_BTT_SKR_MINI_E3_V3_0_1 4028 // BigTreeTech SKR Mini E3 V3.0.1 (STM32F401RC)
|
||||
#define BOARD_BTT_SKR_MINI_MZ_V1_0 4029 // BigTreeTech SKR Mini MZ V1.0 (STM32F103RC)
|
||||
#define BOARD_BTT_SKR_E3_DIP 4030 // BigTreeTech SKR E3 DIP V1.0 (STM32F103RC / STM32F103RE)
|
||||
#define BOARD_BTT_SKR_CR6 4031 // BigTreeTech SKR CR6 v1.0 (STM32F103RE)
|
||||
#define BOARD_JGAURORA_A5S_A1 4032 // JGAurora A5S A1 (STM32F103ZE)
|
||||
#define BOARD_FYSETC_AIO_II 4033 // FYSETC AIO_II (STM32F103RC)
|
||||
#define BOARD_FYSETC_CHEETAH 4034 // FYSETC Cheetah (STM32F103RC)
|
||||
#define BOARD_FYSETC_CHEETAH_V12 4035 // FYSETC Cheetah V1.2 (STM32F103RC)
|
||||
#define BOARD_LONGER3D_LK 4036 // Longer3D LK1/2 - Alfawise U20/U20+/U30 (STM32F103VE)
|
||||
#define BOARD_CCROBOT_MEEB_3DP 4037 // ccrobot-online.com MEEB_3DP (STM32F103RC)
|
||||
#define BOARD_CHITU3D_V5 4038 // Chitu3D TronXY X5SA V5 Board (STM32F103ZE)
|
||||
#define BOARD_CHITU3D_V6 4039 // Chitu3D TronXY X5SA V6 Board (STM32F103ZE)
|
||||
#define BOARD_CHITU3D_V9 4040 // Chitu3D TronXY X5SA V9 Board (STM32F103ZE)
|
||||
#define BOARD_CREALITY_V4 4041 // Creality v4.x (STM32F103RC / STM32F103RE)
|
||||
#define BOARD_CREALITY_V422 4042 // Creality v4.2.2 (STM32F103RC / STM32F103RE)
|
||||
#define BOARD_CREALITY_V423 4043 // Creality v4.2.3 (STM32F103RC / STM32F103RE)
|
||||
#define BOARD_CREALITY_V425 4044 // Creality v4.2.5 (STM32F103RC / STM32F103RE)
|
||||
#define BOARD_CREALITY_V427 4045 // Creality v4.2.7 (STM32F103RC / STM32F103RE)
|
||||
#define BOARD_CREALITY_V4210 4046 // Creality v4.2.10 (STM32F103RC / STM32F103RE) as found in the CR-30
|
||||
#define BOARD_CREALITY_V431 4047 // Creality v4.3.1 (STM32F103RC / STM32F103RE)
|
||||
#define BOARD_CREALITY_V431_A 4048 // Creality v4.3.1a (STM32F103RC / STM32F103RE)
|
||||
#define BOARD_CREALITY_V431_B 4049 // Creality v4.3.1b (STM32F103RC / STM32F103RE)
|
||||
#define BOARD_CREALITY_V431_C 4050 // Creality v4.3.1c (STM32F103RC / STM32F103RE)
|
||||
#define BOARD_CREALITY_V431_D 4051 // Creality v4.3.1d (STM32F103RC / STM32F103RE)
|
||||
#define BOARD_CREALITY_V452 4052 // Creality v4.5.2 (STM32F103RC / STM32F103RE)
|
||||
#define BOARD_CREALITY_V453 4053 // Creality v4.5.3 (STM32F103RC / STM32F103RE)
|
||||
#define BOARD_CREALITY_V24S1 4054 // Creality v2.4.S1 (STM32F103RC / STM32F103RE) v101 as found in the Ender-7
|
||||
#define BOARD_CREALITY_V24S1_301 4055 // Creality v2.4.S1_301 (STM32F103RC / STM32F103RE) v301 as found in the Ender-3 S1
|
||||
#define BOARD_CREALITY_V25S1 4056 // Creality v2.5.S1 (STM32F103RE) as found in the CR-10 Smart Pro
|
||||
#define BOARD_TRIGORILLA_PRO 4057 // Trigorilla Pro (STM32F103ZE)
|
||||
#define BOARD_FLY_MINI 4058 // FLYmaker FLY MINI (STM32F103RC)
|
||||
#define BOARD_FLSUN_HISPEED 4059 // FLSUN HiSpeedV1 (STM32F103VE)
|
||||
#define BOARD_BEAST 4060 // STM32F103RE Libmaple-based controller
|
||||
#define BOARD_MINGDA_MPX_ARM_MINI 4061 // STM32F103ZE Mingda MD-16
|
||||
#define BOARD_GTM32_PRO_VD 4062 // STM32F103VE controller
|
||||
#define BOARD_ZONESTAR_ZM3E2 4063 // Zonestar ZM3E2 (STM32F103RC)
|
||||
#define BOARD_ZONESTAR_ZM3E4 4064 // Zonestar ZM3E4 V1 (STM32F103VC)
|
||||
#define BOARD_ZONESTAR_ZM3E4V2 4065 // Zonestar ZM3E4 V2 (STM32F103VC)
|
||||
#define BOARD_ERYONE_ERY32_MINI 4066 // Eryone Ery32 mini (STM32F103VE)
|
||||
#define BOARD_PANDA_PI_V29 4067 // Panda Pi V2.9 - Standalone (STM32F103RC)
|
||||
|
||||
//
|
||||
// ARM Cortex-M4F
|
||||
|
||||
@ -541,6 +541,8 @@
|
||||
#include "stm32f1/pins_BTT_SKR_MINI_E3_V2_0.h" // STM32F1 env:STM32F103RC_btt env:STM32F103RC_btt_USB env:STM32F103RE_btt env:STM32F103RE_btt_USB env:STM32F103RC_btt_maple env:STM32F103RC_btt_USB_maple env:STM32F103RE_btt_maple env:STM32F103RE_btt_USB_maple
|
||||
#elif MB(BTT_SKR_MINI_E3_V3_0)
|
||||
#include "stm32g0/pins_BTT_SKR_MINI_E3_V3_0.h" // STM32G0 env:STM32G0B1RE_btt env:STM32G0B1RE_btt_xfer
|
||||
#elif MB(BTT_SKR_MINI_E3_V3_0_1)
|
||||
#include "stm32f4/pins_BTT_SKR_MINI_E3_V3_0_1.h"// STM32F4 env:STM32F401RC_btt
|
||||
#elif MB(BTT_SKR_MINI_MZ_V1_0)
|
||||
#include "stm32f1/pins_BTT_SKR_MINI_MZ_V1_0.h" // STM32F1 env:STM32F103RC_btt env:STM32F103RC_btt_USB env:STM32F103RC_btt_maple env:STM32F103RC_btt_USB_maple
|
||||
#elif MB(BTT_SKR_E3_DIP)
|
||||
|
||||
@ -135,6 +135,12 @@
|
||||
#define EXP1_02_PIN PB6
|
||||
#define EXP1_08_PIN PB7
|
||||
#endif
|
||||
#define EXP1_01_PIN PB5
|
||||
#define EXP1_03_PIN PA9
|
||||
#define EXP1_04_PIN -1 // RESET
|
||||
#define EXP1_05_PIN PA10
|
||||
#define EXP1_06_PIN PB9
|
||||
#define EXP1_07_PIN PB8
|
||||
|
||||
#if HAS_DWIN_E3V2 || IS_DWIN_MARLINUI
|
||||
/**
|
||||
@ -156,22 +162,22 @@
|
||||
|
||||
#define BEEPER_PIN EXP1_02_PIN
|
||||
#define BTN_EN1 EXP1_08_PIN
|
||||
#define BTN_EN2 PB8
|
||||
#define BTN_ENC PB5
|
||||
#define BTN_EN2 EXP1_07_PIN
|
||||
#define BTN_ENC EXP1_01_PIN
|
||||
|
||||
#elif HAS_WIRED_LCD
|
||||
|
||||
#if ENABLED(CR10_STOCKDISPLAY)
|
||||
|
||||
#define BEEPER_PIN PB5
|
||||
#define BEEPER_PIN EXP1_01_PIN
|
||||
#define BTN_ENC EXP1_02_PIN
|
||||
|
||||
#define BTN_EN1 PA9
|
||||
#define BTN_EN2 PA10
|
||||
#define BTN_EN1 EXP1_03_PIN
|
||||
#define BTN_EN2 EXP1_05_PIN
|
||||
|
||||
#define LCD_PINS_RS PB8
|
||||
#define LCD_PINS_RS EXP1_07_PIN
|
||||
#define LCD_PINS_ENABLE EXP1_08_PIN
|
||||
#define LCD_PINS_D4 PB9
|
||||
#define LCD_PINS_D4 EXP1_06_PIN
|
||||
|
||||
#elif ENABLED(ZONESTAR_LCD) // ANET A8 LCD Controller - Must convert to 3.3V - CONNECTING TO 5V WILL DAMAGE THE BOARD!
|
||||
|
||||
@ -179,23 +185,23 @@
|
||||
#error "CAUTION! ZONESTAR_LCD requires wiring modifications. See 'pins_BTT_SKR_MINI_E3_common.h' for details. (Define NO_CONTROLLER_CUSTOM_WIRING_WARNING to suppress this warning.)"
|
||||
#endif
|
||||
|
||||
#define LCD_PINS_RS PB9
|
||||
#define LCD_PINS_RS EXP1_06_PIN
|
||||
#define LCD_PINS_ENABLE EXP1_02_PIN
|
||||
#define LCD_PINS_D4 PB8
|
||||
#define LCD_PINS_D5 PA10
|
||||
#define LCD_PINS_D6 PA9
|
||||
#define LCD_PINS_D7 PB5
|
||||
#define LCD_PINS_D4 EXP1_07_PIN
|
||||
#define LCD_PINS_D5 EXP1_05_PIN
|
||||
#define LCD_PINS_D6 EXP1_03_PIN
|
||||
#define LCD_PINS_D7 EXP1_01_PIN
|
||||
#define ADC_KEYPAD_PIN PA1 // Repurpose servo pin for ADC - CONNECTING TO 5V WILL DAMAGE THE BOARD!
|
||||
|
||||
#elif EITHER(MKS_MINI_12864, ENDER2_STOCKDISPLAY)
|
||||
|
||||
#define BTN_ENC EXP1_02_PIN
|
||||
#define BTN_EN1 PA9
|
||||
#define BTN_EN2 PA10
|
||||
#define BTN_EN1 EXP1_03_PIN
|
||||
#define BTN_EN2 EXP1_05_PIN
|
||||
|
||||
#define DOGLCD_CS PB8
|
||||
#define DOGLCD_A0 PB9
|
||||
#define DOGLCD_SCK PB5
|
||||
#define DOGLCD_CS EXP1_07_PIN
|
||||
#define DOGLCD_A0 EXP1_06_PIN
|
||||
#define DOGLCD_SCK EXP1_01_PIN
|
||||
#define DOGLCD_MOSI EXP1_08_PIN
|
||||
|
||||
#define FORCE_SOFT_SPI
|
||||
@ -238,7 +244,7 @@
|
||||
* EXP1-1 ----------- EXP1-7 SD_DET
|
||||
*/
|
||||
|
||||
#define TFTGLCD_CS PA9
|
||||
#define TFTGLCD_CS EXP1_03_PIN
|
||||
|
||||
#endif
|
||||
|
||||
@ -291,20 +297,20 @@
|
||||
* for backlight configuration see steps 2 (V2.1) and 3 in https://wiki.fysetc.com/Mini12864_Panel/
|
||||
*/
|
||||
|
||||
#define LCD_PINS_RS PA9 // CS
|
||||
#define LCD_PINS_RS EXP1_03_PIN // CS
|
||||
#define LCD_PINS_ENABLE PA3 // MOSI
|
||||
#define LCD_BACKLIGHT_PIN -1
|
||||
#define NEOPIXEL_PIN PB8
|
||||
#define NEOPIXEL_PIN EXP1_07_PIN
|
||||
#define LCD_CONTRAST 255
|
||||
#define LCD_RESET_PIN PA10
|
||||
#define LCD_RESET_PIN EXP1_05_PIN
|
||||
|
||||
#define DOGLCD_CS PA9
|
||||
#define DOGLCD_A0 PB5
|
||||
#define DOGLCD_CS EXP1_03_PIN
|
||||
#define DOGLCD_A0 EXP1_01_PIN
|
||||
#define DOGLCD_SCK PA2
|
||||
#define DOGLCD_MOSI PA3
|
||||
|
||||
#define BTN_ENC PA15
|
||||
#define BTN_EN1 PB9
|
||||
#define BTN_EN1 EXP1_06_PIN
|
||||
#define BTN_EN2 PB15
|
||||
|
||||
#define FORCE_SOFT_SPI
|
||||
@ -354,8 +360,8 @@
|
||||
|
||||
#define BEEPER_PIN EXP1_02_PIN
|
||||
|
||||
#define CLCD_MOD_RESET PA9
|
||||
#define CLCD_SPI_CS PB8
|
||||
#define CLCD_MOD_RESET EXP1_03_PIN
|
||||
#define CLCD_SPI_CS EXP1_07_PIN
|
||||
|
||||
#endif // TOUCH_UI_FTDI_EVE && LCD_FYSETC_TFT81050
|
||||
|
||||
@ -370,8 +376,8 @@
|
||||
#if SD_CONNECTION_IS(ONBOARD)
|
||||
#define SD_DETECT_PIN PC4
|
||||
#elif SD_CONNECTION_IS(LCD) && (BOTH(TOUCH_UI_FTDI_EVE, LCD_FYSETC_TFT81050) || IS_TFTGLCD_PANEL)
|
||||
#define SD_DETECT_PIN PB5
|
||||
#define SD_SS_PIN PA10
|
||||
#define SD_DETECT_PIN EXP1_01_PIN
|
||||
#define SD_SS_PIN EXP1_05_PIN
|
||||
#elif SD_CONNECTION_IS(CUSTOM_CABLE)
|
||||
#error "SD CUSTOM_CABLE is not compatible with SKR Mini E3."
|
||||
#endif
|
||||
|
||||
@ -19,11 +19,10 @@
|
||||
* along with this program. If not, see <https://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
// https://github.com/ktand/Armed
|
||||
|
||||
#pragma once
|
||||
|
||||
#include "env_validate.h"
|
||||
|
||||
#if HOTENDS > 2 || E_STEPPERS > 2
|
||||
|
||||
350
Marlin/src/pins/stm32f4/pins_BTT_SKR_MINI_E3_V3_0_1.h
Normal file
350
Marlin/src/pins/stm32f4/pins_BTT_SKR_MINI_E3_V3_0_1.h
Normal file
@ -0,0 +1,350 @@
|
||||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2022 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <https://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
//#define BOARD_CUSTOM_BUILD_FLAGS -DTONE_CHANNEL=4 -DTONE_TIMER=4 -DTIMER_TONE=4
|
||||
|
||||
#include "env_validate.h"
|
||||
|
||||
#if HOTENDS > 1 || E_STEPPERS > 1
|
||||
#error "BTT SKR Mini E3 V3.0.1 supports up to 1 hotend / E stepper."
|
||||
#endif
|
||||
|
||||
#ifndef BOARD_INFO_NAME
|
||||
#define BOARD_INFO_NAME "BTT SKR Mini E3 V3.0.1"
|
||||
#endif
|
||||
|
||||
#define USES_DIAG_JUMPERS
|
||||
|
||||
// Ignore temp readings during development.
|
||||
//#define BOGUS_TEMPERATURE_GRACE_PERIOD 2000
|
||||
|
||||
#ifndef NEOPIXEL_LED
|
||||
#define LED_PIN PA14
|
||||
#endif
|
||||
|
||||
// Onboard I2C EEPROM
|
||||
#if EITHER(NO_EEPROM_SELECTED, I2C_EEPROM)
|
||||
#undef NO_EEPROM_SELECTED
|
||||
#define I2C_EEPROM
|
||||
#define SOFT_I2C_EEPROM // Force the use of Software I2C
|
||||
#define I2C_SCL_PIN PB8
|
||||
#define I2C_SDA_PIN PB9
|
||||
#define MARLIN_EEPROM_SIZE 0x1000 // 4KB
|
||||
#endif
|
||||
|
||||
//
|
||||
// Servos
|
||||
//
|
||||
#define SERVO0_PIN PA0 // SERVOS
|
||||
|
||||
//
|
||||
// Limit Switches
|
||||
//
|
||||
#define X_STOP_PIN PB5 // X-STOP
|
||||
#define Y_STOP_PIN PB6 // Y-STOP
|
||||
#define Z_STOP_PIN PB7 // Z-STOP
|
||||
|
||||
//
|
||||
// Z Probe must be this pin
|
||||
//
|
||||
#define Z_MIN_PROBE_PIN PA1 // PROBE
|
||||
|
||||
//
|
||||
// Filament Runout Sensor
|
||||
//
|
||||
#ifndef FIL_RUNOUT_PIN
|
||||
#define FIL_RUNOUT_PIN PC15 // E0-STOP
|
||||
#endif
|
||||
|
||||
//
|
||||
// Power-loss Detection
|
||||
//
|
||||
#ifndef POWER_LOSS_PIN
|
||||
#define POWER_LOSS_PIN PC13 // Power Loss Detection: PWR-DET
|
||||
#endif
|
||||
|
||||
#ifndef NEOPIXEL_PIN
|
||||
#define NEOPIXEL_PIN PA14 // LED driving pin
|
||||
#endif
|
||||
|
||||
#ifndef PS_ON_PIN
|
||||
#define PS_ON_PIN PC14 // Power Supply Control
|
||||
#endif
|
||||
|
||||
//
|
||||
// Steppers
|
||||
//
|
||||
#define X_ENABLE_PIN PC10
|
||||
#define X_STEP_PIN PC11
|
||||
#define X_DIR_PIN PC12
|
||||
|
||||
#define Y_ENABLE_PIN PB13
|
||||
#define Y_STEP_PIN PB12
|
||||
#define Y_DIR_PIN PB10
|
||||
|
||||
#define Z_ENABLE_PIN PB2
|
||||
#define Z_STEP_PIN PB1
|
||||
#define Z_DIR_PIN PB0
|
||||
|
||||
#define E0_ENABLE_PIN PC3
|
||||
#define E0_STEP_PIN PC2
|
||||
#define E0_DIR_PIN PC1
|
||||
|
||||
#if HAS_TMC_UART
|
||||
/**
|
||||
* TMC220x stepper drivers
|
||||
* Hardware serial communication ports
|
||||
*/
|
||||
#define X_HARDWARE_SERIAL MSerial6
|
||||
#define Y_HARDWARE_SERIAL MSerial6
|
||||
#define Z_HARDWARE_SERIAL MSerial6
|
||||
#define E0_HARDWARE_SERIAL MSerial6
|
||||
|
||||
// Default TMC slave addresses
|
||||
#ifndef X_SLAVE_ADDRESS
|
||||
#define X_SLAVE_ADDRESS 0
|
||||
#endif
|
||||
#ifndef Y_SLAVE_ADDRESS
|
||||
#define Y_SLAVE_ADDRESS 2
|
||||
#endif
|
||||
#ifndef Z_SLAVE_ADDRESS
|
||||
#define Z_SLAVE_ADDRESS 1
|
||||
#endif
|
||||
#ifndef E0_SLAVE_ADDRESS
|
||||
#define E0_SLAVE_ADDRESS 3
|
||||
#endif
|
||||
#endif
|
||||
|
||||
//
|
||||
// Temperature Sensors
|
||||
//
|
||||
#define TEMP_0_PIN PC5 // Analog Input "TH0"
|
||||
#define TEMP_BED_PIN PC4 // Analog Input "TB0"
|
||||
|
||||
//
|
||||
// Heaters / Fans
|
||||
//
|
||||
#define HEATER_0_PIN PA15 // "HE"
|
||||
#define HEATER_BED_PIN PB3 // "HB"
|
||||
#define FAN_PIN PC9 // "FAN0"
|
||||
#define FAN1_PIN PA8 // "FAN1"
|
||||
#define FAN2_PIN PC8 // "FAN2"
|
||||
|
||||
/**
|
||||
* SKR Mini E3 V3.0.1
|
||||
* ------
|
||||
* (BEEPER) PB15 | 1 2 | PB14 (BTN_ENC)
|
||||
* (BTN_EN1) PA9 | 3 4 | RESET
|
||||
* (BTN_EN2) PA10 5 6 | PB4 (LCD_D4)
|
||||
* (LCD_RS) PD2 | 7 8 | PC0 (LCD_EN)
|
||||
* GND | 9 10 | 5V
|
||||
* ------
|
||||
* EXP1
|
||||
*/
|
||||
#define EXP1_01_PIN PB15
|
||||
#define EXP1_02_PIN PB14
|
||||
#define EXP1_03_PIN PA9
|
||||
#define EXP1_04_PIN -1 // RESET
|
||||
#define EXP1_05_PIN PA10
|
||||
#define EXP1_06_PIN PB4
|
||||
#define EXP1_07_PIN PD2
|
||||
#define EXP1_08_PIN PC0
|
||||
|
||||
#if HAS_DWIN_E3V2 || IS_DWIN_MARLINUI
|
||||
/**
|
||||
* ------ ------ ------
|
||||
* (ENT) | 1 2 | (BEEP) |10 9 | |10 9 |
|
||||
* (RX) | 3 4 | (RX) | 8 7 | (TX) RX | 8 7 | TX
|
||||
* (TX) 5 6 | (ENT) 6 5 | (BEEP) ENT | 6 5 | BEEP
|
||||
* (B) | 7 8 | (A) (B) | 4 3 | (A) B | 4 3 | A
|
||||
* GND | 9 10 | (VCC) GND | 2 1 | VCC GND | 2 1 | VCC
|
||||
* ------ ------ ------
|
||||
* EXP1 DWIN DWIN (plug)
|
||||
*
|
||||
* All pins are labeled as printed on DWIN PCB. Connect TX-TX, A-A and so on.
|
||||
*/
|
||||
|
||||
#error "DWIN_CREALITY_LCD requires a custom cable, see diagram above this line. Comment out this line to continue."
|
||||
|
||||
#define BEEPER_PIN EXP1_02_PIN
|
||||
#define BTN_EN1 EXP1_08_PIN
|
||||
#define BTN_EN2 EXP1_07_PIN
|
||||
#define BTN_ENC EXP1_01_PIN
|
||||
|
||||
#elif HAS_WIRED_LCD
|
||||
|
||||
#if ENABLED(CR10_STOCKDISPLAY)
|
||||
|
||||
#define BEEPER_PIN EXP1_01_PIN
|
||||
#define BTN_ENC EXP1_02_PIN
|
||||
|
||||
#define BTN_EN1 EXP1_03_PIN
|
||||
#define BTN_EN2 EXP1_05_PIN
|
||||
|
||||
#define LCD_PINS_RS EXP1_07_PIN
|
||||
#define LCD_PINS_ENABLE EXP1_08_PIN
|
||||
#define LCD_PINS_D4 EXP1_06_PIN
|
||||
|
||||
#elif ENABLED(ZONESTAR_LCD) // ANET A8 LCD Controller - Must convert to 3.3V - CONNECTING TO 5V WILL DAMAGE THE BOARD!
|
||||
|
||||
#ifndef NO_CONTROLLER_CUSTOM_WIRING_WARNING
|
||||
#error "CAUTION! ZONESTAR_LCD requires wiring modifications. See 'pins_BTT_SKR_MINI_E3_common.h' for details. (Define NO_CONTROLLER_CUSTOM_WIRING_WARNING to suppress this warning.)"
|
||||
#endif
|
||||
|
||||
#define LCD_PINS_RS EXP1_06_PIN
|
||||
#define LCD_PINS_ENABLE EXP1_02_PIN
|
||||
#define LCD_PINS_D4 EXP1_07_PIN
|
||||
#define LCD_PINS_D5 EXP1_05_PIN
|
||||
#define LCD_PINS_D6 EXP1_03_PIN
|
||||
#define LCD_PINS_D7 EXP1_01_PIN
|
||||
#define ADC_KEYPAD_PIN PA1 // Repurpose servo pin for ADC - CONNECTING TO 5V WILL DAMAGE THE BOARD!
|
||||
|
||||
#elif EITHER(MKS_MINI_12864, ENDER2_STOCKDISPLAY)
|
||||
|
||||
#define BTN_ENC EXP1_02_PIN
|
||||
#define BTN_EN1 EXP1_03_PIN
|
||||
#define BTN_EN2 EXP1_05_PIN
|
||||
|
||||
#define DOGLCD_CS EXP1_07_PIN
|
||||
#define DOGLCD_A0 EXP1_06_PIN
|
||||
#define DOGLCD_SCK EXP1_01_PIN
|
||||
#define DOGLCD_MOSI EXP1_08_PIN
|
||||
|
||||
#define FORCE_SOFT_SPI
|
||||
#define LCD_BACKLIGHT_PIN -1
|
||||
|
||||
#elif IS_TFTGLCD_PANEL
|
||||
|
||||
#if ENABLED(TFTGLCD_PANEL_SPI)
|
||||
|
||||
#ifndef NO_CONTROLLER_CUSTOM_WIRING_WARNING
|
||||
#error "CAUTION! TFTGLCD_PANEL_SPI requires wiring modifications. See 'pins_BTT_SKR_MINI_E3_common.h' for details. (Define NO_CONTROLLER_CUSTOM_WIRING_WARNING to suppress this warning.)"
|
||||
#endif
|
||||
|
||||
/**
|
||||
* TFTGLCD_PANEL_SPI display pinout
|
||||
*
|
||||
* Board Display
|
||||
* ------ ------
|
||||
* (BEEPER) PB6 | 1 2 | PB15 (SD_DET) 5V |10 9 | GND
|
||||
* RESET | 3 4 | PA9 (MOD_RESET) -- | 8 7 | (SD_DET)
|
||||
* PB4 5 6 | PA10 (SD_CS) (MOSI) | 6 5 | --
|
||||
* PB7 | 7 8 | PD2 (LCD_CS) (SD_CS) | 4 3 | (LCD_CS)
|
||||
* GND | 9 10 | 5V (SCK) | 2 1 | (MISO)
|
||||
* ------ ------
|
||||
* EXP1 EXP1
|
||||
*
|
||||
* Needs custom cable:
|
||||
*
|
||||
* Board Display
|
||||
*
|
||||
* EXP1-10 ---------- EXP1-10
|
||||
* EXP1-9 ----------- EXP1-9
|
||||
* SPI1-4 ----------- EXP1-6
|
||||
* EXP1-7 ----------- FREE
|
||||
* SPI1-3 ----------- EXP1-2
|
||||
* EXP1-5 ----------- EXP1-4
|
||||
* EXP1-4 ----------- FREE
|
||||
* EXP1-3 ----------- EXP1-3
|
||||
* SPI1-1 ----------- EXP1-1
|
||||
* EXP1-1 ----------- EXP1-7
|
||||
*/
|
||||
|
||||
#define TFTGLCD_CS EXP1_03_PIN
|
||||
|
||||
#endif
|
||||
|
||||
#else
|
||||
#error "Only CR10_STOCKDISPLAY, ZONESTAR_LCD, ENDER2_STOCKDISPLAY, MKS_MINI_12864, and TFTGLCD_PANEL_(SPI|I2C) are currently supported on the BIGTREE_SKR_MINI_E3."
|
||||
#endif
|
||||
|
||||
#endif // HAS_WIRED_LCD
|
||||
|
||||
#if BOTH(TOUCH_UI_FTDI_EVE, LCD_FYSETC_TFT81050)
|
||||
|
||||
#ifndef NO_CONTROLLER_CUSTOM_WIRING_WARNING
|
||||
#error "CAUTION! LCD_FYSETC_TFT81050 requires wiring modifications. See 'pins_BTT_SKR_MINI_E3_common.h' for details. (Define NO_CONTROLLER_CUSTOM_WIRING_WARNING to suppress this warning.)"
|
||||
#endif
|
||||
|
||||
/**
|
||||
* FYSETC TFT TFT81050 display pinout
|
||||
*
|
||||
* Board Display
|
||||
* ------ ------
|
||||
* (SD_DET) PB15 | 1 2 | PB6 (BEEPER) 5V |10 9 | GND
|
||||
* (MOD_RESET) PA9 | 3 4 | RESET (RESET) | 8 7 | (SD_DET)
|
||||
* (SD_CS) PA10 5 6 | PB4 (FREE) (MOSI) | 6 5 | (LCD_CS)
|
||||
* (LCD_CS) PD2 | 7 8 | PB7 (FREE) (SD_CS) | 4 3 | (MOD_RESET)
|
||||
* 5V | 9 10 | GND (SCK) | 2 1 | (MISO)
|
||||
* ------ ------
|
||||
* EXP1 EXP1
|
||||
*
|
||||
* Needs custom cable:
|
||||
*
|
||||
* Board Adapter Display
|
||||
* _________
|
||||
* EXP1-10 ---------- EXP1-10
|
||||
* EXP1-9 ----------- EXP1-9
|
||||
* SPI1-4 ----------- EXP1-6
|
||||
* EXP1-7 ----------- EXP1-5
|
||||
* SPI1-3 ----------- EXP1-2
|
||||
* EXP1-5 ----------- EXP1-4
|
||||
* EXP1-4 ----------- EXP1-8
|
||||
* EXP1-3 ----------- EXP1-3
|
||||
* SPI1-1 ----------- EXP1-1
|
||||
* EXP1-1 ----------- EXP1-7
|
||||
*/
|
||||
|
||||
#define CLCD_SPI_BUS 1 // SPI1 connector
|
||||
|
||||
#define BEEPER_PIN EXP1_02_PIN
|
||||
|
||||
#define CLCD_MOD_RESET EXP1_03_PIN
|
||||
#define CLCD_SPI_CS EXP1_07_PIN
|
||||
|
||||
#endif // TOUCH_UI_FTDI_EVE && LCD_FYSETC_TFT81050
|
||||
|
||||
//
|
||||
// SD Support
|
||||
//
|
||||
|
||||
#ifndef SDCARD_CONNECTION
|
||||
#define SDCARD_CONNECTION ONBOARD
|
||||
#endif
|
||||
|
||||
#if SD_CONNECTION_IS(LCD) && (BOTH(TOUCH_UI_FTDI_EVE, LCD_FYSETC_TFT81050) || IS_TFTGLCD_PANEL)
|
||||
#define SD_DETECT_PIN EXP1_01_PIN
|
||||
#define SD_SS_PIN EXP1_05_PIN
|
||||
#elif SD_CONNECTION_IS(CUSTOM_CABLE)
|
||||
#error "SD CUSTOM_CABLE is not compatible with SKR Mini E3."
|
||||
#endif
|
||||
|
||||
#define ONBOARD_SPI_DEVICE 1 // SPI1 -> used only by HAL/STM32F1...
|
||||
#define ONBOARD_SD_CS_PIN PA4 // Chip select for "System" SD card
|
||||
|
||||
#define ENABLE_SPI1
|
||||
#define SDSS ONBOARD_SD_CS_PIN
|
||||
#define SD_SS_PIN ONBOARD_SD_CS_PIN
|
||||
#define SD_SCK_PIN PA5
|
||||
#define SD_MISO_PIN PA6
|
||||
#define SD_MOSI_PIN PA7
|
||||
38
buildroot/share/PlatformIO/boards/marlin_STM32F401RC.json
Normal file
38
buildroot/share/PlatformIO/boards/marlin_STM32F401RC.json
Normal file
@ -0,0 +1,38 @@
|
||||
{
|
||||
"build": {
|
||||
"core": "stm32",
|
||||
"cpu": "cortex-m4",
|
||||
"extra_flags": "-DSTM32F401xC -DSTM32F4xx",
|
||||
"f_cpu": "84000000L",
|
||||
"mcu": "stm32f401rct6",
|
||||
"product_line": "STM32F401xC",
|
||||
"variant": "MARLIN_F401RC"
|
||||
},
|
||||
"debug": {
|
||||
"jlink_device": "STM32F401RC",
|
||||
"openocd_target": "stm32f4x",
|
||||
"svd_path": "STM32F401x.svd"
|
||||
},
|
||||
"frameworks": [
|
||||
"arduino",
|
||||
"cmsis",
|
||||
"spl",
|
||||
"stm32cube",
|
||||
"libopencm3"
|
||||
],
|
||||
"name": "STM32F401RC (64k RAM. 256k Flash)",
|
||||
"upload": {
|
||||
"maximum_ram_size": 65536,
|
||||
"maximum_size": 262144,
|
||||
"protocol": "serial",
|
||||
"protocols": [
|
||||
"blackmagic",
|
||||
"dfu",
|
||||
"jlink",
|
||||
"serial",
|
||||
"stlink"
|
||||
]
|
||||
},
|
||||
"url": "https://www.st.com/en/microcontrollers-microprocessors/stm32f401rc.html",
|
||||
"vendor": "Generic"
|
||||
}
|
||||
@ -0,0 +1,256 @@
|
||||
/*
|
||||
*******************************************************************************
|
||||
* Copyright (c) 2020-2021, STMicroelectronics
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
*******************************************************************************
|
||||
*/
|
||||
/*
|
||||
* Automatically generated from STM32F401R(B-C)Tx.xml, STM32F401R(D-E)Tx.xml
|
||||
* CubeMX DB release 6.0.30
|
||||
*/
|
||||
#if !defined(CUSTOM_PERIPHERAL_PINS)
|
||||
#include "Arduino.h"
|
||||
#include "PeripheralPins.h"
|
||||
|
||||
/* =====
|
||||
* Notes:
|
||||
* - The pins mentioned Px_y_ALTz are alternative possibilities which use other
|
||||
* HW peripheral instances. You can use them the same way as any other "normal"
|
||||
* pin (i.e. analogWrite(PA7_ALT1, 128);).
|
||||
*
|
||||
* - Commented lines are alternative possibilities which are not used per default.
|
||||
* If you change them, you will have to know what you do
|
||||
* =====
|
||||
*/
|
||||
|
||||
//*** ADC ***
|
||||
|
||||
#ifdef HAL_ADC_MODULE_ENABLED
|
||||
WEAK const PinMap PinMap_ADC[] = {
|
||||
{PA_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC1_IN0
|
||||
{PA_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC1_IN1
|
||||
{PA_2, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC1_IN2
|
||||
{PA_3, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC1_IN3
|
||||
{PA_4, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC1_IN4
|
||||
{PA_5, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC1_IN5
|
||||
{PA_6, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC1_IN6
|
||||
{PA_7, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC1_IN7
|
||||
{PB_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC1_IN8
|
||||
{PB_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC1_IN9
|
||||
{PC_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 10, 0)}, // ADC1_IN10
|
||||
{PC_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 11, 0)}, // ADC1_IN11
|
||||
{PC_2, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 12, 0)}, // ADC1_IN12
|
||||
{PC_3, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 13, 0)}, // ADC1_IN13
|
||||
{PC_4, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 14, 0)}, // ADC1_IN14
|
||||
{PC_5, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 15, 0)}, // ADC1_IN15
|
||||
{NC, NP, 0}
|
||||
};
|
||||
#endif
|
||||
|
||||
//*** No DAC ***
|
||||
|
||||
//*** I2C ***
|
||||
|
||||
#ifdef HAL_I2C_MODULE_ENABLED
|
||||
WEAK const PinMap PinMap_I2C_SDA[] = {
|
||||
{PB_3, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF9_I2C2)},
|
||||
{PB_4, I2C3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF9_I2C3)},
|
||||
{PB_7, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
|
||||
{PB_9, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
|
||||
{PC_9, I2C3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
|
||||
{NC, NP, 0}
|
||||
};
|
||||
#endif
|
||||
|
||||
#ifdef HAL_I2C_MODULE_ENABLED
|
||||
WEAK const PinMap PinMap_I2C_SCL[] = {
|
||||
{PA_8, I2C3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
|
||||
{PB_6, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
|
||||
{PB_8, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
|
||||
{PB_10, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
|
||||
{NC, NP, 0}
|
||||
};
|
||||
#endif
|
||||
|
||||
//*** TIM ***
|
||||
|
||||
#ifdef HAL_TIM_MODULE_ENABLED
|
||||
WEAK const PinMap PinMap_TIM[] = {
|
||||
{PA_0, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
|
||||
{PA_0_ALT1, TIM5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 1, 0)}, // TIM5_CH1
|
||||
{PA_1, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2
|
||||
{PA_1_ALT1, TIM5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 2, 0)}, // TIM5_CH2
|
||||
{PA_2, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3
|
||||
{PA_2_ALT1, TIM5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 3, 0)}, // TIM5_CH3
|
||||
{PA_2_ALT2, TIM9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 1, 0)}, // TIM9_CH1
|
||||
{PA_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 4, 0)}, // TIM2_CH4
|
||||
{PA_3_ALT1, TIM5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 4, 0)}, // TIM5_CH4
|
||||
{PA_3_ALT2, TIM9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 2, 0)}, // TIM9_CH2
|
||||
{PA_5, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
|
||||
{PA_6, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1
|
||||
{PA_7, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N
|
||||
{PA_7_ALT1, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2
|
||||
{PA_8, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 0)}, // TIM1_CH1
|
||||
{PA_9, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 0)}, // TIM1_CH2
|
||||
{PA_10, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 0)}, // TIM1_CH3
|
||||
{PA_11, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 4, 0)}, // TIM1_CH4
|
||||
{PA_15, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
|
||||
{PB_0, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N
|
||||
{PB_0_ALT1, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 3, 0)}, // TIM3_CH3
|
||||
{PB_1, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N
|
||||
{PB_1_ALT1, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 4, 0)}, // TIM3_CH4
|
||||
{PB_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2
|
||||
{PB_4, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1
|
||||
{PB_5, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2
|
||||
{PB_6, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 1, 0)}, // TIM4_CH1
|
||||
{PB_7, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 2, 0)}, // TIM4_CH2
|
||||
{PB_8, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 3, 0)}, // TIM4_CH3
|
||||
{PB_8_ALT1, TIM10, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM10, 1, 0)}, // TIM10_CH1
|
||||
{PB_9, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 4, 0)}, // TIM4_CH4
|
||||
{PB_9_ALT1, TIM11, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM11, 1, 0)}, // TIM11_CH1
|
||||
{PB_10, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3
|
||||
{PB_13, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N
|
||||
{PB_14, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N
|
||||
{PB_15, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N
|
||||
{PC_6, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1
|
||||
{PC_7, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2
|
||||
{PC_8, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 3, 0)}, // TIM3_CH3
|
||||
{PC_9, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 4, 0)}, // TIM3_CH4
|
||||
{NC, NP, 0}
|
||||
};
|
||||
#endif
|
||||
|
||||
//*** UART ***
|
||||
|
||||
#ifdef HAL_UART_MODULE_ENABLED
|
||||
WEAK const PinMap PinMap_UART_TX[] = {
|
||||
{PA_2, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
|
||||
{PA_9, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
|
||||
{PA_11, USART6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
|
||||
{PB_6, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
|
||||
{PC_6, USART6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
|
||||
{NC, NP, 0}
|
||||
};
|
||||
#endif
|
||||
|
||||
#ifdef HAL_UART_MODULE_ENABLED
|
||||
WEAK const PinMap PinMap_UART_RX[] = {
|
||||
{PA_3, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
|
||||
{PA_10, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
|
||||
{PA_12, USART6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
|
||||
{PB_7, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
|
||||
{PC_7, USART6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
|
||||
{NC, NP, 0}
|
||||
};
|
||||
#endif
|
||||
|
||||
#ifdef HAL_UART_MODULE_ENABLED
|
||||
WEAK const PinMap PinMap_UART_RTS[] = {
|
||||
{PA_1, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
|
||||
{PA_12, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
|
||||
{NC, NP, 0}
|
||||
};
|
||||
#endif
|
||||
|
||||
#ifdef HAL_UART_MODULE_ENABLED
|
||||
WEAK const PinMap PinMap_UART_CTS[] = {
|
||||
{PA_0, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
|
||||
{PA_11, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
|
||||
{NC, NP, 0}
|
||||
};
|
||||
#endif
|
||||
|
||||
//*** SPI ***
|
||||
|
||||
#ifdef HAL_SPI_MODULE_ENABLED
|
||||
WEAK const PinMap PinMap_SPI_MOSI[] = {
|
||||
{PA_7, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
|
||||
{PB_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
|
||||
{PB_5_ALT1, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
|
||||
{PB_15, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
|
||||
{PC_3, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
|
||||
{PC_12, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
|
||||
{NC, NP, 0}
|
||||
};
|
||||
#endif
|
||||
|
||||
#ifdef HAL_SPI_MODULE_ENABLED
|
||||
WEAK const PinMap PinMap_SPI_MISO[] = {
|
||||
{PA_6, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
|
||||
{PB_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
|
||||
{PB_4_ALT1, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
|
||||
{PB_14, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
|
||||
{PC_2, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
|
||||
{PC_11, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
|
||||
{NC, NP, 0}
|
||||
};
|
||||
#endif
|
||||
|
||||
#ifdef HAL_SPI_MODULE_ENABLED
|
||||
WEAK const PinMap PinMap_SPI_SCLK[] = {
|
||||
{PA_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
|
||||
{PB_3, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
|
||||
{PB_3_ALT1, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
|
||||
{PB_10, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
|
||||
{PB_13, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
|
||||
{PC_10, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
|
||||
{NC, NP, 0}
|
||||
};
|
||||
#endif
|
||||
|
||||
#ifdef HAL_SPI_MODULE_ENABLED
|
||||
WEAK const PinMap PinMap_SPI_SSEL[] = {
|
||||
{PA_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
|
||||
{PA_4_ALT1, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
|
||||
{PA_15, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
|
||||
{PA_15_ALT1, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
|
||||
{PB_9, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
|
||||
{PB_12, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
|
||||
{NC, NP, 0}
|
||||
};
|
||||
#endif
|
||||
|
||||
//*** No CAN ***
|
||||
|
||||
//*** No ETHERNET ***
|
||||
|
||||
//*** No QUADSPI ***
|
||||
|
||||
//*** USB ***
|
||||
|
||||
#if defined(HAL_PCD_MODULE_ENABLED) || defined(HAL_HCD_MODULE_ENABLED)
|
||||
WEAK const PinMap PinMap_USB_OTG_FS[] = {
|
||||
{PA_8, USB_OTG_FS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_FS)}, // USB_OTG_FS_SOF
|
||||
{PA_9, USB_OTG_FS, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, GPIO_AF_NONE)}, // USB_OTG_FS_VBUS
|
||||
{PA_10, USB_OTG_FS, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_PULLUP, GPIO_AF10_OTG_FS)}, // USB_OTG_FS_ID
|
||||
{PA_11, USB_OTG_FS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_FS)}, // USB_OTG_FS_DM
|
||||
{PA_12, USB_OTG_FS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_FS)}, // USB_OTG_FS_DP
|
||||
{NC, NP, 0}
|
||||
};
|
||||
#endif
|
||||
|
||||
//*** SD ***
|
||||
|
||||
#ifdef HAL_SD_MODULE_ENABLED
|
||||
WEAK const PinMap PinMap_SD[] = {
|
||||
{PB_8, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D4
|
||||
{PB_9, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D5
|
||||
{PC_6, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D6
|
||||
{PC_7, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D7
|
||||
{PC_8, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D0
|
||||
{PC_9, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D1
|
||||
{PC_10, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D2
|
||||
{PC_11, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D3
|
||||
{PC_12, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF12_SDIO)}, // SDIO_CK
|
||||
{PD_2, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF12_SDIO)}, // SDIO_CMD
|
||||
{NC, NP, 0}
|
||||
};
|
||||
#endif
|
||||
|
||||
#endif /* !CUSTOM_PERIPHERAL_PINS */
|
||||
@ -0,0 +1,52 @@
|
||||
/* Alternate pin name */
|
||||
PA_0_ALT1 = PA_0 | ALT1,
|
||||
PA_1_ALT1 = PA_1 | ALT1,
|
||||
PA_2_ALT1 = PA_2 | ALT1,
|
||||
PA_2_ALT2 = PA_2 | ALT2,
|
||||
PA_3_ALT1 = PA_3 | ALT1,
|
||||
PA_3_ALT2 = PA_3 | ALT2,
|
||||
PA_4_ALT1 = PA_4 | ALT1,
|
||||
PA_7_ALT1 = PA_7 | ALT1,
|
||||
PA_15_ALT1 = PA_15 | ALT1,
|
||||
PB_0_ALT1 = PB_0 | ALT1,
|
||||
PB_1_ALT1 = PB_1 | ALT1,
|
||||
PB_3_ALT1 = PB_3 | ALT1,
|
||||
PB_4_ALT1 = PB_4 | ALT1,
|
||||
PB_5_ALT1 = PB_5 | ALT1,
|
||||
PB_8_ALT1 = PB_8 | ALT1,
|
||||
PB_9_ALT1 = PB_9 | ALT1,
|
||||
|
||||
/* SYS_WKUP */
|
||||
#ifdef PWR_WAKEUP_PIN1
|
||||
SYS_WKUP1 = PA_0,
|
||||
#endif
|
||||
#ifdef PWR_WAKEUP_PIN2
|
||||
SYS_WKUP2 = NC,
|
||||
#endif
|
||||
#ifdef PWR_WAKEUP_PIN3
|
||||
SYS_WKUP3 = NC,
|
||||
#endif
|
||||
#ifdef PWR_WAKEUP_PIN4
|
||||
SYS_WKUP4 = NC,
|
||||
#endif
|
||||
#ifdef PWR_WAKEUP_PIN5
|
||||
SYS_WKUP5 = NC,
|
||||
#endif
|
||||
#ifdef PWR_WAKEUP_PIN6
|
||||
SYS_WKUP6 = NC,
|
||||
#endif
|
||||
#ifdef PWR_WAKEUP_PIN7
|
||||
SYS_WKUP7 = NC,
|
||||
#endif
|
||||
#ifdef PWR_WAKEUP_PIN8
|
||||
SYS_WKUP8 = NC,
|
||||
#endif
|
||||
|
||||
/* USB */
|
||||
#ifdef USBCON
|
||||
USB_OTG_FS_DM = PA_11,
|
||||
USB_OTG_FS_DP = PA_12,
|
||||
USB_OTG_FS_ID = PA_10,
|
||||
USB_OTG_FS_SOF = PA_8,
|
||||
USB_OTG_FS_VBUS = PA_9,
|
||||
#endif
|
||||
177
buildroot/share/PlatformIO/variants/MARLIN_F401RC/ldscript.ld
Normal file
177
buildroot/share/PlatformIO/variants/MARLIN_F401RC/ldscript.ld
Normal file
@ -0,0 +1,177 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file LinkerScript.ld
|
||||
* @author Auto-generated by STM32CubeIDE
|
||||
* @brief Linker script for STM32F401RBTx Device from STM32F4 series
|
||||
* 128Kbytes FLASH
|
||||
* 64Kbytes RAM
|
||||
*
|
||||
* Set heap size, stack size and stack location according
|
||||
* to application requirements.
|
||||
*
|
||||
* Set memory bank area and size if external memory is used
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2020 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Entry Point */
|
||||
ENTRY(Reset_Handler)
|
||||
|
||||
/* Highest address of the user mode stack */
|
||||
_estack = ORIGIN(RAM) + LENGTH(RAM); /* end of "RAM" Ram type memory */
|
||||
|
||||
_Min_Heap_Size = 0x200; /* required amount of heap */
|
||||
_Min_Stack_Size = 0x400; /* required amount of stack */
|
||||
|
||||
/* Memories definition */
|
||||
MEMORY
|
||||
{
|
||||
RAM (xrw) : ORIGIN = 0x20000000, LENGTH = LD_MAX_DATA_SIZE
|
||||
FLASH (rx) : ORIGIN = 0x8000000 + LD_FLASH_OFFSET, LENGTH = LD_MAX_SIZE - LD_FLASH_OFFSET
|
||||
}
|
||||
|
||||
/* Sections */
|
||||
SECTIONS
|
||||
{
|
||||
/* The startup code into "FLASH" Rom type memory */
|
||||
.isr_vector :
|
||||
{
|
||||
. = ALIGN(4);
|
||||
KEEP(*(.isr_vector)) /* Startup code */
|
||||
. = ALIGN(4);
|
||||
} >FLASH
|
||||
|
||||
/* The program code and other data into "FLASH" Rom type memory */
|
||||
.text :
|
||||
{
|
||||
. = ALIGN(4);
|
||||
*(.text) /* .text sections (code) */
|
||||
*(.text*) /* .text* sections (code) */
|
||||
*(.glue_7) /* glue arm to thumb code */
|
||||
*(.glue_7t) /* glue thumb to arm code */
|
||||
*(.eh_frame)
|
||||
|
||||
KEEP (*(.init))
|
||||
KEEP (*(.fini))
|
||||
|
||||
. = ALIGN(4);
|
||||
_etext = .; /* define a global symbols at end of code */
|
||||
} >FLASH
|
||||
|
||||
/* Constant data into "FLASH" Rom type memory */
|
||||
.rodata :
|
||||
{
|
||||
. = ALIGN(4);
|
||||
*(.rodata) /* .rodata sections (constants, strings, etc.) */
|
||||
*(.rodata*) /* .rodata* sections (constants, strings, etc.) */
|
||||
. = ALIGN(4);
|
||||
} >FLASH
|
||||
|
||||
.ARM.extab : {
|
||||
. = ALIGN(4);
|
||||
*(.ARM.extab* .gnu.linkonce.armextab.*)
|
||||
. = ALIGN(4);
|
||||
} >FLASH
|
||||
|
||||
.ARM : {
|
||||
. = ALIGN(4);
|
||||
__exidx_start = .;
|
||||
*(.ARM.exidx*)
|
||||
__exidx_end = .;
|
||||
. = ALIGN(4);
|
||||
} >FLASH
|
||||
|
||||
.preinit_array :
|
||||
{
|
||||
. = ALIGN(4);
|
||||
PROVIDE_HIDDEN (__preinit_array_start = .);
|
||||
KEEP (*(.preinit_array*))
|
||||
PROVIDE_HIDDEN (__preinit_array_end = .);
|
||||
. = ALIGN(4);
|
||||
} >FLASH
|
||||
|
||||
.init_array :
|
||||
{
|
||||
. = ALIGN(4);
|
||||
PROVIDE_HIDDEN (__init_array_start = .);
|
||||
KEEP (*(SORT(.init_array.*)))
|
||||
KEEP (*(.init_array*))
|
||||
PROVIDE_HIDDEN (__init_array_end = .);
|
||||
. = ALIGN(4);
|
||||
} >FLASH
|
||||
|
||||
.fini_array :
|
||||
{
|
||||
. = ALIGN(4);
|
||||
PROVIDE_HIDDEN (__fini_array_start = .);
|
||||
KEEP (*(SORT(.fini_array.*)))
|
||||
KEEP (*(.fini_array*))
|
||||
PROVIDE_HIDDEN (__fini_array_end = .);
|
||||
. = ALIGN(4);
|
||||
} >FLASH
|
||||
|
||||
/* Used by the startup to initialize data */
|
||||
_sidata = LOADADDR(.data);
|
||||
|
||||
/* Initialized data sections into "RAM" Ram type memory */
|
||||
.data :
|
||||
{
|
||||
. = ALIGN(4);
|
||||
_sdata = .; /* create a global symbol at data start */
|
||||
*(.data) /* .data sections */
|
||||
*(.data*) /* .data* sections */
|
||||
*(.RamFunc) /* .RamFunc sections */
|
||||
*(.RamFunc*) /* .RamFunc* sections */
|
||||
|
||||
. = ALIGN(4);
|
||||
_edata = .; /* define a global symbol at data end */
|
||||
|
||||
} >RAM AT> FLASH
|
||||
|
||||
/* Uninitialized data section into "RAM" Ram type memory */
|
||||
. = ALIGN(4);
|
||||
.bss :
|
||||
{
|
||||
/* This is used by the startup in order to initialize the .bss section */
|
||||
_sbss = .; /* define a global symbol at bss start */
|
||||
__bss_start__ = _sbss;
|
||||
*(.bss)
|
||||
*(.bss*)
|
||||
*(COMMON)
|
||||
|
||||
. = ALIGN(4);
|
||||
_ebss = .; /* define a global symbol at bss end */
|
||||
__bss_end__ = _ebss;
|
||||
} >RAM
|
||||
|
||||
/* User_heap_stack section, used to check that there is enough "RAM" Ram type memory left */
|
||||
._user_heap_stack :
|
||||
{
|
||||
. = ALIGN(8);
|
||||
PROVIDE ( end = . );
|
||||
PROVIDE ( _end = . );
|
||||
. = . + _Min_Heap_Size;
|
||||
. = . + _Min_Stack_Size;
|
||||
. = ALIGN(8);
|
||||
} >RAM
|
||||
|
||||
/* Remove information from the compiler libraries */
|
||||
/DISCARD/ :
|
||||
{
|
||||
libc.a ( * )
|
||||
libm.a ( * )
|
||||
libgcc.a ( * )
|
||||
}
|
||||
|
||||
.ARM.attributes 0 : { *(.ARM.attributes) }
|
||||
}
|
||||
@ -0,0 +1,223 @@
|
||||
/*
|
||||
*******************************************************************************
|
||||
* Copyright (c) 2020-2021, STMicroelectronics
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
*******************************************************************************
|
||||
*/
|
||||
|
||||
#if defined(STM32F401xC)
|
||||
#include "pins_arduino.h"
|
||||
|
||||
// Digital PinName array
|
||||
const PinName digitalPin[] = {
|
||||
PA_0, // D0/A0
|
||||
PA_1, // D1/A1
|
||||
PA_2, // D2/A2
|
||||
PA_3, // D3/A3
|
||||
PA_4, // D4/A4
|
||||
PA_5, // D5/A5
|
||||
PA_6, // D6/A6
|
||||
PA_7, // D7/A7
|
||||
PA_8, // D8
|
||||
PA_9, // D9
|
||||
PA_10, // D10
|
||||
PA_11, // D11
|
||||
PA_12, // D12
|
||||
PA_13, // D13
|
||||
PA_14, // D14
|
||||
PA_15, // D15
|
||||
PB_0, // D16/A8
|
||||
PB_1, // D17/A9
|
||||
PB_2, // D18
|
||||
PB_3, // D19
|
||||
PB_4, // D20
|
||||
PB_5, // D21
|
||||
PB_6, // D22
|
||||
PB_7, // D23
|
||||
PB_8, // D24
|
||||
PB_9, // D25
|
||||
PB_10, // D26
|
||||
PB_12, // D27
|
||||
PB_13, // D28
|
||||
PB_14, // D29
|
||||
PB_15, // D30
|
||||
PC_0, // D31/A10
|
||||
PC_1, // D32/A11
|
||||
PC_2, // D33/A12
|
||||
PC_3, // D34/A13
|
||||
PC_4, // D35/A14
|
||||
PC_5, // D36/A15
|
||||
PC_6, // D37
|
||||
PC_7, // D38
|
||||
PC_8, // D39
|
||||
PC_9, // D40
|
||||
PC_10, // D41
|
||||
PC_11, // D42
|
||||
PC_12, // D43
|
||||
PC_13, // D44
|
||||
PC_14, // D45
|
||||
PC_15, // D46
|
||||
PD_2, // D47
|
||||
PH_0, // D48
|
||||
PH_1 // D49
|
||||
};
|
||||
|
||||
// Analog (Ax) pin number array
|
||||
const uint32_t analogInputPin[] = {
|
||||
0, // A0, PA0
|
||||
1, // A1, PA1
|
||||
2, // A2, PA2
|
||||
3, // A3, PA3
|
||||
4, // A4, PA4
|
||||
5, // A5, PA5
|
||||
6, // A6, PA6
|
||||
7, // A7, PA7
|
||||
16, // A8, PB0
|
||||
17, // A9, PB1
|
||||
31, // A10, PC0
|
||||
32, // A11, PC1
|
||||
33, // A12, PC2
|
||||
34, // A13, PC3
|
||||
35, // A14, PC4
|
||||
36 // A15, PC5
|
||||
};
|
||||
|
||||
// ----------------------------------------------------------------------------
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/*
|
||||
* @brief Configures the System clock source, PLL Multiplier and Divider factors,
|
||||
* AHB/APBx prescalers and Flash settings
|
||||
* @note This function should be called only once the RCC clock configuration
|
||||
* is reset to the default reset state (done in SystemInit() function).
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
|
||||
/******************************************************************************/
|
||||
/* PLL (clocked by HSE) used as System clock source */
|
||||
/******************************************************************************/
|
||||
static uint8_t SetSysClock_PLL_HSE(uint8_t bypass)
|
||||
{
|
||||
RCC_OscInitTypeDef RCC_OscInitStruct;
|
||||
RCC_ClkInitTypeDef RCC_ClkInitStruct;
|
||||
|
||||
/* The voltage scaling allows optimizing the power consumption when the device is
|
||||
clocked below the maximum system frequency, to update the voltage scaling value
|
||||
regarding system frequency refer to product datasheet. */
|
||||
__HAL_RCC_PWR_CLK_ENABLE();
|
||||
__HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE2);
|
||||
|
||||
// Enable HSE oscillator and activate PLL with HSE as source
|
||||
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
|
||||
if (bypass == 0) {
|
||||
RCC_OscInitStruct.HSEState = RCC_HSE_ON; // External 8 MHz xtal on OSC_IN/OSC_OUT
|
||||
} else {
|
||||
RCC_OscInitStruct.HSEState = RCC_HSE_BYPASS; // External 8 MHz clock on OSC_IN
|
||||
}
|
||||
|
||||
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
|
||||
RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
|
||||
RCC_OscInitStruct.PLL.PLLM = HSE_VALUE / 1000000L; // Expects an 8 MHz external clock by default. Redefine HSE_VALUE if not
|
||||
RCC_OscInitStruct.PLL.PLLN = 336; // VCO output clock = 336 MHz (1 MHz * 336)
|
||||
RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV4; // PLLCLK = 84 MHz (336 MHz / 4)
|
||||
RCC_OscInitStruct.PLL.PLLQ = 7; // USB clock = 48 MHz (336 MHz / 7) --> OK for USB
|
||||
if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) {
|
||||
return 0; // FAIL
|
||||
}
|
||||
|
||||
// Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2 clocks dividers
|
||||
RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2;
|
||||
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; // 84 MHz
|
||||
RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; // 84 MHz
|
||||
RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV2; // 42 MHz
|
||||
RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1; // 84 MHz
|
||||
if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_2) != HAL_OK) {
|
||||
return 0; // FAIL
|
||||
}
|
||||
|
||||
/* Output clock on MCO1 pin(PA8) for debugging purpose */
|
||||
/*
|
||||
if (bypass == 0)
|
||||
HAL_RCC_MCOConfig(RCC_MCO1, RCC_MCO1SOURCE_HSE, RCC_MCODIV_2); // 4 MHz
|
||||
else
|
||||
HAL_RCC_MCOConfig(RCC_MCO1, RCC_MCO1SOURCE_HSE, RCC_MCODIV_1); // 8 MHz
|
||||
*/
|
||||
|
||||
return 1; // OK
|
||||
}
|
||||
|
||||
/******************************************************************************/
|
||||
/* PLL (clocked by HSI) used as System clock source */
|
||||
/******************************************************************************/
|
||||
uint8_t SetSysClock_PLL_HSI(void)
|
||||
{
|
||||
RCC_OscInitTypeDef RCC_OscInitStruct;
|
||||
RCC_ClkInitTypeDef RCC_ClkInitStruct;
|
||||
|
||||
/* The voltage scaling allows optimizing the power consumption when the device is
|
||||
clocked below the maximum system frequency, to update the voltage scaling value
|
||||
regarding system frequency refer to product datasheet. */
|
||||
__HAL_RCC_PWR_CLK_ENABLE();
|
||||
__HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE2);
|
||||
|
||||
// Enable HSI oscillator and activate PLL with HSI as source
|
||||
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI | RCC_OSCILLATORTYPE_HSE;
|
||||
RCC_OscInitStruct.HSIState = RCC_HSI_ON;
|
||||
RCC_OscInitStruct.HSEState = RCC_HSE_OFF;
|
||||
RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT;
|
||||
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
|
||||
RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSI;
|
||||
RCC_OscInitStruct.PLL.PLLM = 16; // VCO input clock = 1 MHz (16 MHz / 16)
|
||||
RCC_OscInitStruct.PLL.PLLN = 336; // VCO output clock = 336 MHz (1 MHz * 336)
|
||||
RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV4; // PLLCLK = 84 MHz (336 MHz / 4)
|
||||
RCC_OscInitStruct.PLL.PLLQ = 7; // USB clock = 48 MHz (336 MHz / 7) --> freq is ok but not precise enough
|
||||
if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) {
|
||||
return 0; // FAIL
|
||||
}
|
||||
|
||||
/* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2 clocks dividers */
|
||||
RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2);
|
||||
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; // 84 MHz
|
||||
RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; // 84 MHz
|
||||
RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV2; // 42 MHz
|
||||
RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1; // 84 MHz
|
||||
if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_2) != HAL_OK) {
|
||||
return 0; // FAIL
|
||||
}
|
||||
|
||||
/* Output clock on MCO1 pin(PA8) for debugging purpose */
|
||||
//HAL_RCC_MCOConfig(RCC_MCO1, RCC_MCO1SOURCE_HSI, RCC_MCODIV_1); // 16 MHz
|
||||
|
||||
return 1; // OK
|
||||
}
|
||||
|
||||
WEAK void SystemClock_Config(void)
|
||||
{
|
||||
/* 1- If fail try to start with HSE and external xtal */
|
||||
if (SetSysClock_PLL_HSE(0) == 0) {
|
||||
/* 2- Try to start with HSE and external clock */
|
||||
if (SetSysClock_PLL_HSE(1) == 0) {
|
||||
/* 3- If fail start with HSI clock */
|
||||
if (SetSysClock_PLL_HSI() == 0) {
|
||||
Error_Handler();
|
||||
}
|
||||
}
|
||||
}
|
||||
/* Output clock on MCO2 pin(PC9) for debugging purpose */
|
||||
//HAL_RCC_MCOConfig(RCC_MCO2, RCC_MCO2SOURCE_SYSCLK, RCC_MCODIV_4);
|
||||
}
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
#endif /* STM32F401xC */
|
||||
@ -0,0 +1,186 @@
|
||||
/*
|
||||
*******************************************************************************
|
||||
* Copyright (c) 2020-2021, STMicroelectronics
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
*******************************************************************************
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
/*----------------------------------------------------------------------------
|
||||
* STM32 pins number
|
||||
*----------------------------------------------------------------------------*/
|
||||
#define PA0 PIN_A0
|
||||
#define PA1 PIN_A1
|
||||
#define PA2 PIN_A2
|
||||
#define PA3 PIN_A3
|
||||
#define PA4 PIN_A4
|
||||
#define PA5 PIN_A5
|
||||
#define PA6 PIN_A6
|
||||
#define PA7 PIN_A7
|
||||
#define PA8 8
|
||||
#define PA9 9
|
||||
#define PA10 10
|
||||
#define PA11 11
|
||||
#define PA12 12
|
||||
#define PA13 13
|
||||
#define PA14 14
|
||||
#define PA15 15
|
||||
#define PB0 PIN_A8
|
||||
#define PB1 PIN_A9
|
||||
#define PB2 18
|
||||
#define PB3 19
|
||||
#define PB4 20
|
||||
#define PB5 21
|
||||
#define PB6 22
|
||||
#define PB7 23
|
||||
#define PB8 24
|
||||
#define PB9 25
|
||||
#define PB10 26
|
||||
#define PB12 27
|
||||
#define PB13 28
|
||||
#define PB14 29
|
||||
#define PB15 30
|
||||
#define PC0 PIN_A10
|
||||
#define PC1 PIN_A11
|
||||
#define PC2 PIN_A12
|
||||
#define PC3 PIN_A13
|
||||
#define PC4 PIN_A14
|
||||
#define PC5 PIN_A15
|
||||
#define PC6 37
|
||||
#define PC7 38
|
||||
#define PC8 39
|
||||
#define PC9 40
|
||||
#define PC10 41
|
||||
#define PC11 42
|
||||
#define PC12 43
|
||||
#define PC13 44
|
||||
#define PC14 45
|
||||
#define PC15 46
|
||||
#define PD2 47
|
||||
#define PH0 48
|
||||
#define PH1 49
|
||||
|
||||
// Alternate pins number
|
||||
#define PA0_ALT1 (PA0 | ALT1)
|
||||
#define PA1_ALT1 (PA1 | ALT1)
|
||||
#define PA2_ALT1 (PA2 | ALT1)
|
||||
#define PA2_ALT2 (PA2 | ALT2)
|
||||
#define PA3_ALT1 (PA3 | ALT1)
|
||||
#define PA3_ALT2 (PA3 | ALT2)
|
||||
#define PA4_ALT1 (PA4 | ALT1)
|
||||
#define PA7_ALT1 (PA7 | ALT1)
|
||||
#define PA15_ALT1 (PA15 | ALT1)
|
||||
#define PB0_ALT1 (PB0 | ALT1)
|
||||
#define PB1_ALT1 (PB1 | ALT1)
|
||||
#define PB3_ALT1 (PB3 | ALT1)
|
||||
#define PB4_ALT1 (PB4 | ALT1)
|
||||
#define PB5_ALT1 (PB5 | ALT1)
|
||||
#define PB8_ALT1 (PB8 | ALT1)
|
||||
#define PB9_ALT1 (PB9 | ALT1)
|
||||
|
||||
#define NUM_DIGITAL_PINS 50
|
||||
#define NUM_ANALOG_INPUTS 16
|
||||
#define NUM_ANALOG_FIRST 192
|
||||
|
||||
// On-board LED pin number
|
||||
#ifndef LED_BUILTIN
|
||||
#define LED_BUILTIN PNUM_NOT_DEFINED
|
||||
#endif
|
||||
|
||||
// On-board user button
|
||||
#ifndef USER_BTN
|
||||
#define USER_BTN PNUM_NOT_DEFINED
|
||||
#endif
|
||||
|
||||
// SPI definitions
|
||||
#ifndef PIN_SPI_SS
|
||||
#define PIN_SPI_SS PA4
|
||||
#endif
|
||||
#ifndef PIN_SPI_SS1
|
||||
#define PIN_SPI_SS1 PA15
|
||||
#endif
|
||||
#ifndef PIN_SPI_SS2
|
||||
#define PIN_SPI_SS2 PNUM_NOT_DEFINED
|
||||
#endif
|
||||
#ifndef PIN_SPI_SS3
|
||||
#define PIN_SPI_SS3 PNUM_NOT_DEFINED
|
||||
#endif
|
||||
#ifndef PIN_SPI_MOSI
|
||||
#define PIN_SPI_MOSI PA7
|
||||
#endif
|
||||
#ifndef PIN_SPI_MISO
|
||||
#define PIN_SPI_MISO PA6
|
||||
#endif
|
||||
#ifndef PIN_SPI_SCK
|
||||
#define PIN_SPI_SCK PA5
|
||||
#endif
|
||||
|
||||
// I2C definitions
|
||||
#ifndef PIN_WIRE_SDA
|
||||
#define PIN_WIRE_SDA PB3
|
||||
#endif
|
||||
#ifndef PIN_WIRE_SCL
|
||||
#define PIN_WIRE_SCL PB10
|
||||
#endif
|
||||
|
||||
// Timer Definitions
|
||||
// Use TIM6/TIM7 when possible as servo and tone don't need GPIO output pin
|
||||
#ifndef TIMER_TONE
|
||||
#define TIMER_TONE TIM10
|
||||
#endif
|
||||
#ifndef TIMER_SERVO
|
||||
#define TIMER_SERVO TIM11
|
||||
#endif
|
||||
|
||||
// UART Definitions
|
||||
#ifndef SERIAL_UART_INSTANCE
|
||||
#define SERIAL_UART_INSTANCE 2
|
||||
#endif
|
||||
|
||||
// Default pin used for generic 'Serial' instance
|
||||
// Mandatory for Firmata
|
||||
#ifndef PIN_SERIAL_RX
|
||||
#define PIN_SERIAL_RX PA3
|
||||
#endif
|
||||
#ifndef PIN_SERIAL_TX
|
||||
#define PIN_SERIAL_TX PA2
|
||||
#endif
|
||||
|
||||
// Extra HAL modules
|
||||
#if !defined(HAL_SD_MODULE_DISABLED)
|
||||
#define HAL_SD_MODULE_ENABLED
|
||||
#endif
|
||||
|
||||
/*----------------------------------------------------------------------------
|
||||
* Arduino objects - C++ only
|
||||
*----------------------------------------------------------------------------*/
|
||||
|
||||
#ifdef __cplusplus
|
||||
// These serial port names are intended to allow libraries and architecture-neutral
|
||||
// sketches to automatically default to the correct port name for a particular type
|
||||
// of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN,
|
||||
// the first hardware serial port whose RX/TX pins are not dedicated to another use.
|
||||
//
|
||||
// SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor
|
||||
//
|
||||
// SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial
|
||||
//
|
||||
// SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library
|
||||
//
|
||||
// SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins.
|
||||
//
|
||||
// SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX
|
||||
// pins are NOT connected to anything by default.
|
||||
#ifndef SERIAL_PORT_MONITOR
|
||||
#define SERIAL_PORT_MONITOR Serial
|
||||
#endif
|
||||
#ifndef SERIAL_PORT_HARDWARE
|
||||
#define SERIAL_PORT_HARDWARE Serial
|
||||
#endif
|
||||
#endif
|
||||
@ -656,3 +656,21 @@ upload_protocol = jlink
|
||||
extends = env:STM32F401RC_creality
|
||||
debug_tool = stlink
|
||||
upload_protocol = stlink
|
||||
|
||||
#
|
||||
# BigTree SKR mini E3 V3.0.1 (STM32F401RCT6 ARM Cortex-M4)
|
||||
#
|
||||
[env:STM32F401RC_btt]
|
||||
extends = stm32_variant
|
||||
platform = ststm32@~14.1.0
|
||||
platform_packages = framework-arduinoststm32@https://github.com/stm32duino/Arduino_Core_STM32/archive/main.zip
|
||||
board = marlin_STM32F401RC
|
||||
board_build.offset = 0x4000
|
||||
board_upload.offset_address = 0x08004000
|
||||
build_flags = ${stm32_variant.build_flags}
|
||||
-DPIN_SERIAL6_RX=PC_7 -DPIN_SERIAL6_TX=PC_6
|
||||
-DSERIAL_RX_BUFFER_SIZE=1024 -DSERIAL_TX_BUFFER_SIZE=1024
|
||||
-DTIMER_SERVO=TIM3 -DTIMER_TONE=TIM4
|
||||
-DSTEP_TIMER_IRQ_PRIO=0
|
||||
upload_protocol = stlink
|
||||
debug_tool = stlink
|
||||
|
||||
Loading…
Reference in New Issue
Block a user