bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity

Group leveling reports for folding

Browse Source
This commit is contained in:
Scott Lahteine 2018-01-03 21:55:07 -06:00
parent 190cd0a111
commit a80f2eea23
1 changed files with 47 additions and 45 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

92
Marlin/src/module/configuration_store.cpp
View File

@ -1804,36 +1804,35 @@ void MarlinSettings::reset() {
} }
#endif #endif
#if ENABLED(MESH_BED_LEVELING) /**
* Bed Leveling
*/
#if HAS_LEVELING
if (!forReplay) { #if ENABLED(MESH_BED_LEVELING)
CONFIG_ECHO_START;
SERIAL_ECHOLNPGM("Mesh Bed Leveling:"); if (!forReplay) {
}
CONFIG_ECHO_START;
SERIAL_ECHOPAIR(" M420 S", leveling_is_valid() ? 1 : 0);
#if ENABLED(ENABLE_LEVELING_FADE_HEIGHT)
SERIAL_ECHOPAIR(" Z", LINEAR_UNIT(planner.z_fade_height));
#endif
SERIAL_EOL();
for (uint8_t py = 0; py < GRID_MAX_POINTS_Y; py++) {
for (uint8_t px = 0; px < GRID_MAX_POINTS_X; px++) {
CONFIG_ECHO_START; CONFIG_ECHO_START;
SERIAL_ECHOPAIR(" G29 S3 X", (int)px + 1); SERIAL_ECHOLNPGM("Mesh Bed Leveling:");
SERIAL_ECHOPAIR(" Y", (int)py + 1);
SERIAL_ECHOPGM(" Z");
SERIAL_PROTOCOL_F(LINEAR_UNIT(mbl.z_values[px][py]), 5);
SERIAL_EOL();
} }
}
#elif ENABLED(AUTO_BED_LEVELING_UBL) #elif ENABLED(AUTO_BED_LEVELING_UBL)
if (!forReplay) {
CONFIG_ECHO_START;
ubl.echo_name();
SERIAL_ECHOLNPGM(":");
}
#elif HAS_ABL
if (!forReplay) {
CONFIG_ECHO_START;
SERIAL_ECHOLNPGM("Auto Bed Leveling:");
}
#endif
if (!forReplay) {
CONFIG_ECHO_START;
ubl.echo_name();
SERIAL_ECHOLNPGM(":");
}
CONFIG_ECHO_START; CONFIG_ECHO_START;
SERIAL_ECHOPAIR(" M420 S", planner.leveling_active ? 1 : 0); SERIAL_ECHOPAIR(" M420 S", planner.leveling_active ? 1 : 0);
#if ENABLED(ENABLE_LEVELING_FADE_HEIGHT) #if ENABLED(ENABLE_LEVELING_FADE_HEIGHT)
@ -1841,29 +1840,32 @@ void MarlinSettings::reset() {
#endif #endif
SERIAL_EOL(); SERIAL_EOL();
if (!forReplay) { #if ENABLED(MESH_BED_LEVELING)
SERIAL_EOL();
ubl.report_state();
SERIAL_ECHOLNPAIR("\nActive Mesh Slot: ", ubl.storage_slot); for (uint8_t py = 0; py < GRID_MAX_POINTS_Y; py++) {
SERIAL_ECHOPAIR("EEPROM can hold ", calc_num_meshes()); for (uint8_t px = 0; px < GRID_MAX_POINTS_X; px++) {
SERIAL_ECHOLNPGM(" meshes.\n"); CONFIG_ECHO_START;
} SERIAL_ECHOPAIR(" G29 S3 X", (int)px + 1);
SERIAL_ECHOPAIR(" Y", (int)py + 1);
SERIAL_ECHOPGM(" Z");
SERIAL_PROTOCOL_F(LINEAR_UNIT(mbl.z_values[px][py]), 5);
SERIAL_EOL();
}
}
#elif HAS_ABL #elif ENABLED(AUTO_BED_LEVELING_UBL)
if (!forReplay) {
SERIAL_EOL();
ubl.report_state();
SERIAL_ECHOLNPAIR("\nActive Mesh Slot: ", ubl.storage_slot);
SERIAL_ECHOPAIR("EEPROM can hold ", calc_num_meshes());
SERIAL_ECHOLNPGM(" meshes.\n");
}
if (!forReplay) {
CONFIG_ECHO_START;
SERIAL_ECHOLNPGM("Auto Bed Leveling:");
}
CONFIG_ECHO_START;
SERIAL_ECHOPAIR(" M420 S", planner.leveling_active ? 1 : 0);
#if ENABLED(ENABLE_LEVELING_FADE_HEIGHT)
SERIAL_ECHOPAIR(" Z", LINEAR_UNIT(planner.z_fade_height));
#endif #endif
SERIAL_EOL();
#endif #endif // HAS_LEVELING
#if ENABLED(DELTA) #if ENABLED(DELTA)
if (!forReplay) { if (!forReplay) {
@ -2042,7 +2044,7 @@ void MarlinSettings::reset() {
/** /**
* TMC2130 stepper driver current * TMC2130 stepper driver current
*/ */
#if ENABLED(HAVE_TMC2130) #if HAS_TRINAMIC
if (!forReplay) { if (!forReplay) {
CONFIG_ECHO_START; CONFIG_ECHO_START;
SERIAL_ECHOLNPGM("Stepper driver current:"); SERIAL_ECHOLNPGM("Stepper driver current:");
@ -2088,7 +2090,7 @@ void MarlinSettings::reset() {
/** /**
* TMC2130 Sensorless homing thresholds * TMC2130 Sensorless homing thresholds
*/ */
#if ENABLED(HAVE_TMC2130) && ENABLED(SENSORLESS_HOMING) #if ENABLED(SENSORLESS_HOMING)
if (!forReplay) { if (!forReplay) {
CONFIG_ECHO_START; CONFIG_ECHO_START;
SERIAL_ECHOLNPGM("Sensorless homing threshold:"); SERIAL_ECHOLNPGM("Sensorless homing threshold:");