bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity

🎨 Clean up warnings / extra check (#24163)

Browse Source
This commit is contained in:
Keith Bennett
2022-05-12 22:41:38 -07:00
committed by Scott Lahteine
parent 7d37ae2b2b
commit a6ff63d506
2 changed files with 5 additions and 15 deletions
Download Patch File Download Diff File Expand all files Collapse all files

10
Marlin/src/gcode/calibrate/G76_M871.cpp
View File

@@ -82,13 +82,13 @@
* - `P` - Run probe temperature calibration. * - `P` - Run probe temperature calibration.
*/ */
static void say_waiting_for() { SERIAL_ECHOPGM("Waiting for "); }
static void say_waiting_for_probe_heating() { say_waiting_for(); SERIAL_ECHOLNPGM("probe heating."); }
static void say_successfully_calibrated() { SERIAL_ECHOPGM("Successfully calibrated"); }
static void say_failed_to_calibrate() { SERIAL_ECHOPGM("!Failed to calibrate"); }
#if BOTH(PTC_PROBE, PTC_BED) #if BOTH(PTC_PROBE, PTC_BED)
static void say_waiting_for() { SERIAL_ECHOPGM("Waiting for "); }
static void say_waiting_for_probe_heating() { say_waiting_for(); SERIAL_ECHOLNPGM("probe heating."); }
static void say_successfully_calibrated() { SERIAL_ECHOPGM("Successfully calibrated"); }
static void say_failed_to_calibrate() { SERIAL_ECHOPGM("!Failed to calibrate"); }
void GcodeSuite::G76() { void GcodeSuite::G76() {
auto report_temps = [](millis_t &ntr, millis_t timeout=0) { auto report_temps = [](millis_t &ntr, millis_t timeout=0) {
idle_no_sleep(); idle_no_sleep();

10
Marlin/src/inc/SanityCheck.h
View File

@@ -2288,16 +2288,6 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
#endif #endif
#endif #endif
#if TEMP_SENSOR_PROBE
#if !PIN_EXISTS(TEMP_PROBE)
#error "TEMP_SENSOR_PROBE requires TEMP_PROBE_PIN."
#elif !HAS_TEMP_ADC_PROBE
#error "TEMP_PROBE_PIN must be an ADC pin."
#elif DISABLED(FIX_MOUNTED_PROBE)
#error "TEMP_SENSOR_PROBE shouldn't be set without FIX_MOUNTED_PROBE."
#endif
#endif
#if TEMP_SENSOR_BOARD #if TEMP_SENSOR_BOARD
#if !PIN_EXISTS(TEMP_BOARD) #if !PIN_EXISTS(TEMP_BOARD)
#error "TEMP_SENSOR_BOARD requires TEMP_BOARD_PIN." #error "TEMP_SENSOR_BOARD requires TEMP_BOARD_PIN."