From a5d2180bf5fa201acedf9ee746c6443794e659e7 Mon Sep 17 00:00:00 2001 From: Giuliano Zaro <3684609+GMagician@users.noreply.github.com> Date: Sat, 16 Jan 2021 03:38:34 +0100 Subject: [PATCH] MMU2 as standard serial device (#20771) --- Marlin/Configuration_adv.h | 3 --- Marlin/src/HAL/AVR/HAL.h | 7 +++++++ Marlin/src/HAL/DUE/HAL.h | 8 ++++++++ Marlin/src/HAL/LPC1768/HAL.h | 10 ++++++++++ Marlin/src/HAL/SAMD51/HAL.h | 10 ++++++++++ Marlin/src/HAL/SAMD51/MarlinSerial_AGCM4.cpp | 8 ++++---- Marlin/src/HAL/STM32/HAL.h | 10 ++++++++++ Marlin/src/HAL/STM32/MarlinSerial.cpp | 4 ++++ Marlin/src/HAL/STM32F1/HAL.h | 12 ++++++++++++ Marlin/src/feature/mmu/mmu2.cpp | 16 +++++++--------- Marlin/src/inc/Conditionals_adv.h | 5 ++++- Marlin/src/inc/SanityCheck.h | 19 +++++++++++++++---- 12 files changed, 91 insertions(+), 21 deletions(-) diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h index ca2e02c736..0e2545700d 100644 --- a/Marlin/Configuration_adv.h +++ b/Marlin/Configuration_adv.h @@ -3601,10 +3601,7 @@ //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs #elif HAS_PRUSA_MMU2 // Serial port used for communication with MMU2. - // For AVR enable the UART port used for the MMU. (e.g., mmuSerial) - // For 32-bit boards check your HAL for available serial ports. (e.g., Serial2) #define MMU2_SERIAL_PORT 2 - #define MMU2_SERIAL mmuSerial // Use hardware reset for MMU if a pin is defined for it //#define MMU2_RST_PIN 23 diff --git a/Marlin/src/HAL/AVR/HAL.h b/Marlin/src/HAL/AVR/HAL.h index aa6a321320..8b95acb0ac 100644 --- a/Marlin/src/HAL/AVR/HAL.h +++ b/Marlin/src/HAL/AVR/HAL.h @@ -97,6 +97,13 @@ typedef int8_t pin_t; #endif #endif +#ifdef MMU2_SERIAL_PORT + #if !WITHIN(MMU2_SERIAL_PORT, -1, 3) + #error "MMU2_SERIAL_PORT must be from -1 to 3. Please update your configuration." + #endif + #define MMU2_SERIAL mmuSerial +#endif + #ifdef LCD_SERIAL_PORT #if !WITHIN(LCD_SERIAL_PORT, -1, 3) #error "LCD_SERIAL_PORT must be from -1 to 3. Please update your configuration." diff --git a/Marlin/src/HAL/DUE/HAL.h b/Marlin/src/HAL/DUE/HAL.h index 395ca4ccc9..4783947f6f 100644 --- a/Marlin/src/HAL/DUE/HAL.h +++ b/Marlin/src/HAL/DUE/HAL.h @@ -59,6 +59,14 @@ #endif #endif +#ifdef MMU2_SERIAL_PORT + #if WITHIN(MMU2_SERIAL_PORT, 0, 3) + #define MMU2_SERIAL MSERIAL(SERIAL_PORT) + #else + #error "MMU2_SERIAL_PORT must be from 0 to 3. Please update your configuration." + #endif +#endif + #ifdef LCD_SERIAL_PORT #if LCD_SERIAL_PORT == -1 #define LCD_SERIAL lcdSerial diff --git a/Marlin/src/HAL/LPC1768/HAL.h b/Marlin/src/HAL/LPC1768/HAL.h index f2347bf5a7..44a4e88624 100644 --- a/Marlin/src/HAL/LPC1768/HAL.h +++ b/Marlin/src/HAL/LPC1768/HAL.h @@ -82,6 +82,16 @@ extern "C" volatile uint32_t _millis; #endif #endif +#ifdef MMU2_SERIAL_PORT + #if MMU2_SERIAL_PORT == -1 + #define MMU2_SERIAL UsbSerial + #elif WITHIN(MMU2_SERIAL_PORT, 0, 3) + #define MMU2_SERIAL MSERIAL(MMU2_SERIAL_PORT) + #else + #error "MMU2_SERIAL_PORT must be from -1 to 3. Please update your configuration." + #endif +#endif + #ifdef LCD_SERIAL_PORT #if LCD_SERIAL_PORT == -1 #define LCD_SERIAL UsbSerial diff --git a/Marlin/src/HAL/SAMD51/HAL.h b/Marlin/src/HAL/SAMD51/HAL.h index ff93101146..fd2eb59475 100644 --- a/Marlin/src/HAL/SAMD51/HAL.h +++ b/Marlin/src/HAL/SAMD51/HAL.h @@ -57,6 +57,16 @@ #endif #endif + #ifdef MMU2_SERIAL_PORT + #if MMU2_SERIAL_PORT == -1 + #define MMU2_SERIAL Serial + #elif WITHIN(MMU2_SERIAL_PORT, 0, 3) + #define MMU2_SERIAL MSERIAL(MMU2_SERIAL_PORT) + #else + #error "MMU2_SERIAL_PORT must be from -1 to 3. Please update your configuration." + #endif + #endif + #ifdef LCD_SERIAL_PORT #if LCD_SERIAL_PORT == -1 #define LCD_SERIAL Serial diff --git a/Marlin/src/HAL/SAMD51/MarlinSerial_AGCM4.cpp b/Marlin/src/HAL/SAMD51/MarlinSerial_AGCM4.cpp index abc5f3acbf..fac67cf5a3 100644 --- a/Marlin/src/HAL/SAMD51/MarlinSerial_AGCM4.cpp +++ b/Marlin/src/HAL/SAMD51/MarlinSerial_AGCM4.cpp @@ -21,13 +21,13 @@ #ifdef ADAFRUIT_GRAND_CENTRAL_M4 /** - * Framework doesn't define some serial to save sercom resources + * Framework doesn't define some serials to save sercom resources * hence if these are used I need to define them */ #include "../../inc/MarlinConfig.h" -#if SERIAL_PORT == 1 || SERIAL_PORT_2 == 1 +#if USING_SERIAL_1 Uart Serial2(&sercom4, PIN_SERIAL2_RX, PIN_SERIAL2_TX, PAD_SERIAL2_RX, PAD_SERIAL2_TX); void SERCOM4_0_Handler() { Serial2.IrqHandler(); } void SERCOM4_1_Handler() { Serial2.IrqHandler(); } @@ -35,7 +35,7 @@ void SERCOM4_3_Handler() { Serial2.IrqHandler(); } #endif -#if SERIAL_PORT == 2 || SERIAL_PORT_2 == 2 +#if USING_SERIAL_2 Uart Serial3(&sercom1, PIN_SERIAL3_RX, PIN_SERIAL3_TX, PAD_SERIAL3_RX, PAD_SERIAL3_TX); void SERCOM1_0_Handler() { Serial3.IrqHandler(); } void SERCOM1_1_Handler() { Serial3.IrqHandler(); } @@ -43,7 +43,7 @@ void SERCOM1_3_Handler() { Serial3.IrqHandler(); } #endif -#if SERIAL_PORT == 3 || SERIAL_PORT_2 == 3 +#if USING_SERIAL_3 Uart Serial4(&sercom5, PIN_SERIAL4_RX, PIN_SERIAL4_TX, PAD_SERIAL4_RX, PAD_SERIAL4_TX); void SERCOM5_0_Handler() { Serial4.IrqHandler(); } void SERCOM5_1_Handler() { Serial4.IrqHandler(); } diff --git a/Marlin/src/HAL/STM32/HAL.h b/Marlin/src/HAL/STM32/HAL.h index b1c27e4ec5..65074f0967 100644 --- a/Marlin/src/HAL/STM32/HAL.h +++ b/Marlin/src/HAL/STM32/HAL.h @@ -65,6 +65,16 @@ #endif #endif +#ifdef MMU2_SERIAL_PORT + #if MMU2_SERIAL_PORT == -1 + #define MMU2_SERIAL SerialUSB + #elif WITHIN(MMU2_SERIAL_PORT, 1, 6) + #define MMU2_SERIAL MSERIAL(MMU2_SERIAL_PORT) + #else + #error "MMU2_SERIAL_PORT must be -1 or from 1 to 6. Please update your configuration." + #endif +#endif + #ifdef LCD_SERIAL_PORT #if LCD_SERIAL_PORT == -1 #define LCD_SERIAL SerialUSB diff --git a/Marlin/src/HAL/STM32/MarlinSerial.cpp b/Marlin/src/HAL/STM32/MarlinSerial.cpp index 50765ee995..4d9177248a 100644 --- a/Marlin/src/HAL/STM32/MarlinSerial.cpp +++ b/Marlin/src/HAL/STM32/MarlinSerial.cpp @@ -48,6 +48,10 @@ DECLARE_SERIAL_PORT_EXP(SERIAL_PORT_2) #endif +#if defined(MMU2_SERIAL_PORT) && MMU2_SERIAL_PORT >= 0 + DECLARE_SERIAL_PORT_EXP(MMU2_SERIAL_PORT) +#endif + #if defined(LCD_SERIAL_PORT) && LCD_SERIAL_PORT >= 0 DECLARE_SERIAL_PORT_EXP(LCD_SERIAL_PORT) #endif diff --git a/Marlin/src/HAL/STM32F1/HAL.h b/Marlin/src/HAL/STM32F1/HAL.h index a193fe05c8..ecfc172953 100644 --- a/Marlin/src/HAL/STM32F1/HAL.h +++ b/Marlin/src/HAL/STM32F1/HAL.h @@ -99,6 +99,18 @@ #endif #endif +#ifdef MMU2_SERIAL_PORT + #if MMU2_SERIAL_PORT == -1 + #define MMU2_SERIAL UsbSerial + #elif WITHIN(MMU2_SERIAL_PORT, 1, NUM_UARTS) + #define MMU2_SERIAL MSERIAL(MMU2_SERIAL_PORT) + #elif NUM_UARTS == 5 + #error "MMU2_SERIAL_PORT must be -1 or from 1 to 5. Please update your configuration." + #else + #error "MMU2_SERIAL_PORT must be -1 or from 1 to 3. Please update your configuration." + #endif +#endif + #ifdef LCD_SERIAL_PORT #if LCD_SERIAL_PORT == -1 #define LCD_SERIAL UsbSerial diff --git a/Marlin/src/feature/mmu/mmu2.cpp b/Marlin/src/feature/mmu/mmu2.cpp index 9e93f95086..a4b7f257a9 100644 --- a/Marlin/src/feature/mmu/mmu2.cpp +++ b/Marlin/src/feature/mmu/mmu2.cpp @@ -91,8 +91,6 @@ MMU2 mmu2; #define MMU2_NO_TOOL 99 #define MMU_BAUD 115200 -#define mmuSerial MMU2_SERIAL - bool MMU2::enabled, MMU2::ready, MMU2::mmu_print_saved; #if HAS_PRUSA_MMU2S bool MMU2::mmu2s_triggered; @@ -132,7 +130,7 @@ void MMU2::init() { SET_OUTPUT(MMU2_RST_PIN); #endif - mmuSerial.begin(MMU_BAUD); + MMU2_SERIAL.begin(MMU_BAUD); extruder = MMU2_NO_TOOL; safe_delay(10); @@ -385,8 +383,8 @@ bool MMU2::rx_start() { bool MMU2::rx_str_P(const char* str) { uint8_t i = strlen(rx_buffer); - while (mmuSerial.available()) { - rx_buffer[i++] = mmuSerial.read(); + while (MMU2_SERIAL.available()) { + rx_buffer[i++] = MMU2_SERIAL.read(); rx_buffer[i] = '\0'; if (i == sizeof(rx_buffer) - 1) { @@ -417,7 +415,7 @@ bool MMU2::rx_str_P(const char* str) { void MMU2::tx_str_P(const char* str) { clear_rx_buffer(); uint8_t len = strlen_P(str); - LOOP_L_N(i, len) mmuSerial.write(pgm_read_byte(str++)); + LOOP_L_N(i, len) MMU2_SERIAL.write(pgm_read_byte(str++)); rx_buffer[0] = '\0'; prev_request = millis(); } @@ -428,7 +426,7 @@ void MMU2::tx_str_P(const char* str) { void MMU2::tx_printf_P(const char* format, int argument = -1) { clear_rx_buffer(); uint8_t len = sprintf_P(tx_buffer, format, argument); - LOOP_L_N(i, len) mmuSerial.write(tx_buffer[i]); + LOOP_L_N(i, len) MMU2_SERIAL.write(tx_buffer[i]); rx_buffer[0] = '\0'; prev_request = millis(); } @@ -439,7 +437,7 @@ void MMU2::tx_printf_P(const char* format, int argument = -1) { void MMU2::tx_printf_P(const char* format, int argument1, int argument2) { clear_rx_buffer(); uint8_t len = sprintf_P(tx_buffer, format, argument1, argument2); - LOOP_L_N(i, len) mmuSerial.write(tx_buffer[i]); + LOOP_L_N(i, len) MMU2_SERIAL.write(tx_buffer[i]); rx_buffer[0] = '\0'; prev_request = millis(); } @@ -448,7 +446,7 @@ void MMU2::tx_printf_P(const char* format, int argument1, int argument2) { * Empty the rx buffer */ void MMU2::clear_rx_buffer() { - while (mmuSerial.available()) mmuSerial.read(); + while (MMU2_SERIAL.available()) MMU2_SERIAL.read(); rx_buffer[0] = '\0'; } diff --git a/Marlin/src/inc/Conditionals_adv.h b/Marlin/src/inc/Conditionals_adv.h index d650d32216..22a671c5b3 100644 --- a/Marlin/src/inc/Conditionals_adv.h +++ b/Marlin/src/inc/Conditionals_adv.h @@ -512,7 +512,10 @@ #endif // Flag the indexed serial ports that are in use -#define ANY_SERIAL_IS(N) (defined(SERIAL_PORT) && SERIAL_PORT == (N)) || (defined(SERIAL_PORT_2) && SERIAL_PORT_2 == (N)) || (defined(LCD_SERIAL_PORT) && LCD_SERIAL_PORT == (N)) +#define ANY_SERIAL_IS(N) (defined(SERIAL_PORT) && SERIAL_PORT == (N)) || \ + (defined(SERIAL_PORT_2) && SERIAL_PORT_2 == (N)) || \ + (defined(MMU2_SERIAL_PORT) && MMU2_SERIAL_PORT == (N)) || \ + (defined(LCD_SERIAL_PORT) && LCD_SERIAL_PORT == (N)) #if ANY_SERIAL_IS(-1) #define USING_SERIAL_DEFAULT #endif diff --git a/Marlin/src/inc/SanityCheck.h b/Marlin/src/inc/SanityCheck.h index 2547425885..8da31336e8 100644 --- a/Marlin/src/inc/SanityCheck.h +++ b/Marlin/src/inc/SanityCheck.h @@ -588,10 +588,6 @@ #error "SERIAL_PORT must be defined." #elif defined(SERIAL_PORT_2) && SERIAL_PORT_2 == SERIAL_PORT #error "SERIAL_PORT_2 cannot be the same as SERIAL_PORT." -#elif defined(LCD_SERIAL_PORT) && LCD_SERIAL_PORT == SERIAL_PORT - #error "LCD_SERIAL_PORT cannot be the same as SERIAL_PORT." -#elif defined(LCD_SERIAL_PORT) && LCD_SERIAL_PORT == SERIAL_PORT_2 - #error "LCD_SERIAL_PORT cannot be the same as SERIAL_PORT_2." #endif #if !(defined(__AVR__) && defined(USBCON)) #if ENABLED(SERIAL_XON_XOFF) && RX_BUFFER_SIZE < 1024 @@ -2389,11 +2385,26 @@ static_assert(hbm[Z_AXIS] >= 0, "HOMING_BUMP_MM.Z must be greater than or equal #error "SERIAL_PORT is set to -1, but the MOTHERBOARD has no native USB support. Set SERIAL_PORT to a valid value for your board." #elif SERIAL_PORT_2 == -1 #error "SERIAL_PORT_2 is set to -1, but the MOTHERBOARD has no native USB support. Set SERIAL_PORT_2 to a valid value for your board." + #elif MMU2_SERIAL_PORT == -1 + #error "MMU2_SERIAL_PORT is set to -1, but the MOTHERBOARD has no native USB support. Set MMU2_SERIAL_PORT to a valid value for your board." #elif LCD_SERIAL_PORT == -1 #error "LCD_SERIAL_PORT is set to -1, but the MOTHERBOARD has no native USB support. Set LCD_SERIAL_PORT to a valid value for your board." #endif #endif +/** + * MMU2 require a dedicated serial port + */ +#ifdef MMU2_SERIAL_PORT + #if MMU2_SERIAL_PORT == SERIAL_PORT + #error "MMU2_SERIAL_PORT cannot be the same as SERIAL_PORT." + #elif defined(SERIAL_PORT_2) && MMU2_SERIAL_PORT == SERIAL_PORT_2 + #error "MMU2_SERIAL_PORT cannot be the same as SERIAL_PORT_2." + #elif defined(LCD_SERIAL_PORT) && MMU2_SERIAL_PORT == LCD_SERIAL_PORT + #error "MMU2_SERIAL_PORT cannot be the same as LCD_SERIAL_PORT." + #endif +#endif + /** * Serial displays require a dedicated serial port */