diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h
index af2f096c47..a1bbbfcb43 100644
--- a/Marlin/Configuration.h
+++ b/Marlin/Configuration.h
@@ -753,6 +753,9 @@
  *   (e.g., an inductive probe or a nozzle-based probe-switch.)
  */
 //#define FIX_MOUNTED_PROBE
+#if ENABLED(FIX_MOUNTED_PROBE)
+  //#define MANUAL_DEPLOY_STOW
+#endif
 
 /**
  * Z Servo Probe, such as an endstop switch on a rotating arm.
diff --git a/Marlin/src/config/default/Configuration.h b/Marlin/src/config/default/Configuration.h
index af2f096c47..a1bbbfcb43 100644
--- a/Marlin/src/config/default/Configuration.h
+++ b/Marlin/src/config/default/Configuration.h
@@ -753,6 +753,9 @@
  *   (e.g., an inductive probe or a nozzle-based probe-switch.)
  */
 //#define FIX_MOUNTED_PROBE
+#if ENABLED(FIX_MOUNTED_PROBE)
+  //#define MANUAL_DEPLOY_STOW
+#endif
 
 /**
  * Z Servo Probe, such as an endstop switch on a rotating arm.
diff --git a/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration.h b/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration.h
index ba21a972f1..5a15e59083 100644
--- a/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration.h
+++ b/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration.h
@@ -773,6 +773,9 @@
  *   (e.g., an inductive probe or a nozzle-based probe-switch.)
  */
 #define FIX_MOUNTED_PROBE
+#if ENABLED(FIX_MOUNTED_PROBE)
+  //#define MANUAL_DEPLOY_STOW
+#endif
 
 /**
  * Z Servo Probe, such as an endstop switch on a rotating arm.
diff --git a/Marlin/src/config/examples/AliExpress/CL-260/Configuration.h b/Marlin/src/config/examples/AliExpress/CL-260/Configuration.h
index f33af0715c..082fbc108b 100644
--- a/Marlin/src/config/examples/AliExpress/CL-260/Configuration.h
+++ b/Marlin/src/config/examples/AliExpress/CL-260/Configuration.h
@@ -753,6 +753,9 @@
  *   (e.g., an inductive probe or a nozzle-based probe-switch.)
  */
 //#define FIX_MOUNTED_PROBE
+#if ENABLED(FIX_MOUNTED_PROBE)
+  //#define MANUAL_DEPLOY_STOW
+#endif
 
 /**
  * Z Servo Probe, such as an endstop switch on a rotating arm.
diff --git a/Marlin/src/config/examples/Anet/A2/Configuration.h b/Marlin/src/config/examples/Anet/A2/Configuration.h
index 21bce3af7c..63b6f67f22 100644
--- a/Marlin/src/config/examples/Anet/A2/Configuration.h
+++ b/Marlin/src/config/examples/Anet/A2/Configuration.h
@@ -736,6 +736,9 @@
  *   (e.g., an inductive probe or a nozzle-based probe-switch.)
  */
 //#define FIX_MOUNTED_PROBE
+#if ENABLED(FIX_MOUNTED_PROBE)
+  //#define MANUAL_DEPLOY_STOW
+#endif
 
 /**
  * Z Servo Probe, such as an endstop switch on a rotating arm.
diff --git a/Marlin/src/config/examples/Anet/A2plus/Configuration.h b/Marlin/src/config/examples/Anet/A2plus/Configuration.h
index 739198667e..6fdb59d8db 100644
--- a/Marlin/src/config/examples/Anet/A2plus/Configuration.h
+++ b/Marlin/src/config/examples/Anet/A2plus/Configuration.h
@@ -736,6 +736,9 @@
  *   (e.g., an inductive probe or a nozzle-based probe-switch.)
  */
 //#define FIX_MOUNTED_PROBE
+#if ENABLED(FIX_MOUNTED_PROBE)
+  //#define MANUAL_DEPLOY_STOW
+#endif
 
 /**
  * Z Servo Probe, such as an endstop switch on a rotating arm.
diff --git a/Marlin/src/config/examples/Anet/A6/Configuration.h b/Marlin/src/config/examples/Anet/A6/Configuration.h
index faba60a49f..3318c83762 100644
--- a/Marlin/src/config/examples/Anet/A6/Configuration.h
+++ b/Marlin/src/config/examples/Anet/A6/Configuration.h
@@ -801,6 +801,9 @@
  *   (e.g., an inductive probe or a nozzle-based probe-switch.)
  */
 //#define FIX_MOUNTED_PROBE
+#if ENABLED(FIX_MOUNTED_PROBE)
+  //#define MANUAL_DEPLOY_STOW
+#endif
 
 /**
  * Z Servo Probe, such as an endstop switch on a rotating arm.
diff --git a/Marlin/src/config/examples/Anet/A8/Configuration.h b/Marlin/src/config/examples/Anet/A8/Configuration.h
index 9927f29134..9a1cdc5bc4 100644
--- a/Marlin/src/config/examples/Anet/A8/Configuration.h
+++ b/Marlin/src/config/examples/Anet/A8/Configuration.h
@@ -760,6 +760,9 @@
  *   (e.g., an inductive probe or a nozzle-based probe-switch.)
  */
 //#define FIX_MOUNTED_PROBE
+#if ENABLED(FIX_MOUNTED_PROBE)
+  //#define MANUAL_DEPLOY_STOW
+#endif
 
 /**
  * Z Servo Probe, such as an endstop switch on a rotating arm.
diff --git a/Marlin/src/config/examples/Azteeg/X5GT/Configuration.h b/Marlin/src/config/examples/Azteeg/X5GT/Configuration.h
index 4704b667cc..66d679a238 100644
--- a/Marlin/src/config/examples/Azteeg/X5GT/Configuration.h
+++ b/Marlin/src/config/examples/Azteeg/X5GT/Configuration.h
@@ -753,6 +753,9 @@
  *   (e.g., an inductive probe or a nozzle-based probe-switch.)
  */
 //#define FIX_MOUNTED_PROBE
+#if ENABLED(FIX_MOUNTED_PROBE)
+  //#define MANUAL_DEPLOY_STOW
+#endif
 
 /**
  * Z Servo Probe, such as an endstop switch on a rotating arm.
diff --git a/Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration.h b/Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration.h
index ecc7f2f6cd..7fabddff43 100644
--- a/Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration.h
+++ b/Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration.h
@@ -725,6 +725,9 @@
  *   (e.g., an inductive probe or a nozzle-based probe-switch.)
  */
 //#define FIX_MOUNTED_PROBE
+#if ENABLED(FIX_MOUNTED_PROBE)
+  //#define MANUAL_DEPLOY_STOW
+#endif
 
 /**
  * Z Servo Probe, such as an endstop switch on a rotating arm.
diff --git a/Marlin/src/config/examples/BIBO/TouchX/default/Configuration.h b/Marlin/src/config/examples/BIBO/TouchX/default/Configuration.h
index bc4277b2e7..6646df5813 100644
--- a/Marlin/src/config/examples/BIBO/TouchX/default/Configuration.h
+++ b/Marlin/src/config/examples/BIBO/TouchX/default/Configuration.h
@@ -725,6 +725,9 @@
  *   (e.g., an inductive probe or a nozzle-based probe-switch.)
  */
 //#define FIX_MOUNTED_PROBE
+#if ENABLED(FIX_MOUNTED_PROBE)
+  //#define MANUAL_DEPLOY_STOW
+#endif
 
 /**
  * Z Servo Probe, such as an endstop switch on a rotating arm.
diff --git a/Marlin/src/config/examples/BQ/Hephestos/Configuration.h b/Marlin/src/config/examples/BQ/Hephestos/Configuration.h
index 638857e3e7..d7c6be805a 100644
--- a/Marlin/src/config/examples/BQ/Hephestos/Configuration.h
+++ b/Marlin/src/config/examples/BQ/Hephestos/Configuration.h
@@ -741,6 +741,9 @@
  *   (e.g., an inductive probe or a nozzle-based probe-switch.)
  */
 //#define FIX_MOUNTED_PROBE
+#if ENABLED(FIX_MOUNTED_PROBE)
+  //#define MANUAL_DEPLOY_STOW
+#endif
 
 /**
  * Z Servo Probe, such as an endstop switch on a rotating arm.
diff --git a/Marlin/src/config/examples/BQ/Hephestos_2/Configuration.h b/Marlin/src/config/examples/BQ/Hephestos_2/Configuration.h
index 88834d2454..9f6704e3c7 100644
--- a/Marlin/src/config/examples/BQ/Hephestos_2/Configuration.h
+++ b/Marlin/src/config/examples/BQ/Hephestos_2/Configuration.h
@@ -754,6 +754,9 @@
  *   (e.g., an inductive probe or a nozzle-based probe-switch.)
  */
 #define FIX_MOUNTED_PROBE
+#if ENABLED(FIX_MOUNTED_PROBE)
+  //#define MANUAL_DEPLOY_STOW
+#endif
 
 /**
  * Z Servo Probe, such as an endstop switch on a rotating arm.
diff --git a/Marlin/src/config/examples/BQ/WITBOX/Configuration.h b/Marlin/src/config/examples/BQ/WITBOX/Configuration.h
index 510e36f2b6..e07f06399b 100644
--- a/Marlin/src/config/examples/BQ/WITBOX/Configuration.h
+++ b/Marlin/src/config/examples/BQ/WITBOX/Configuration.h
@@ -741,6 +741,9 @@
  *   (e.g., an inductive probe or a nozzle-based probe-switch.)
  */
 //#define FIX_MOUNTED_PROBE
+#if ENABLED(FIX_MOUNTED_PROBE)
+  //#define MANUAL_DEPLOY_STOW
+#endif
 
 /**
  * Z Servo Probe, such as an endstop switch on a rotating arm.
diff --git a/Marlin/src/config/examples/Cartesio/Configuration.h b/Marlin/src/config/examples/Cartesio/Configuration.h
index 637d077e75..a0a429fe97 100644
--- a/Marlin/src/config/examples/Cartesio/Configuration.h
+++ b/Marlin/src/config/examples/Cartesio/Configuration.h
@@ -752,6 +752,9 @@
  *   (e.g., an inductive probe or a nozzle-based probe-switch.)
  */
 //#define FIX_MOUNTED_PROBE
+#if ENABLED(FIX_MOUNTED_PROBE)
+  //#define MANUAL_DEPLOY_STOW
+#endif
 
 /**
  * Z Servo Probe, such as an endstop switch on a rotating arm.
diff --git a/Marlin/src/config/examples/Creality/CR-10/Configuration.h b/Marlin/src/config/examples/Creality/CR-10/Configuration.h
index b2904b23ac..2bc0c6db02 100755
--- a/Marlin/src/config/examples/Creality/CR-10/Configuration.h
+++ b/Marlin/src/config/examples/Creality/CR-10/Configuration.h
@@ -763,6 +763,9 @@
  *   (e.g., an inductive probe or a nozzle-based probe-switch.)
  */
 //#define FIX_MOUNTED_PROBE
+#if ENABLED(FIX_MOUNTED_PROBE)
+  //#define MANUAL_DEPLOY_STOW
+#endif
 
 /**
  * Z Servo Probe, such as an endstop switch on a rotating arm.
diff --git a/Marlin/src/config/examples/Creality/CR-10S/Configuration.h b/Marlin/src/config/examples/Creality/CR-10S/Configuration.h
index 78fec6cb2c..d24145184a 100644
--- a/Marlin/src/config/examples/Creality/CR-10S/Configuration.h
+++ b/Marlin/src/config/examples/Creality/CR-10S/Configuration.h
@@ -757,6 +757,9 @@
  *   (e.g., an inductive probe or a nozzle-based probe-switch.)
  */
 //#define FIX_MOUNTED_PROBE
+#if ENABLED(FIX_MOUNTED_PROBE)
+  //#define MANUAL_DEPLOY_STOW
+#endif
 
 /**
  * Z Servo Probe, such as an endstop switch on a rotating arm.
diff --git a/Marlin/src/config/examples/Creality/CR-10mini/Configuration.h b/Marlin/src/config/examples/Creality/CR-10mini/Configuration.h
index 1db3899267..9949d8331e 100644
--- a/Marlin/src/config/examples/Creality/CR-10mini/Configuration.h
+++ b/Marlin/src/config/examples/Creality/CR-10mini/Configuration.h
@@ -772,6 +772,9 @@
  *   (e.g., an inductive probe or a nozzle-based probe-switch.)
  */
 //#define FIX_MOUNTED_PROBE
+#if ENABLED(FIX_MOUNTED_PROBE)
+  //#define MANUAL_DEPLOY_STOW
+#endif
 
 /**
  * Z Servo Probe, such as an endstop switch on a rotating arm.
diff --git a/Marlin/src/config/examples/Creality/CR-8/Configuration.h b/Marlin/src/config/examples/Creality/CR-8/Configuration.h
index 9b80e5042c..8f4486a231 100644
--- a/Marlin/src/config/examples/Creality/CR-8/Configuration.h
+++ b/Marlin/src/config/examples/Creality/CR-8/Configuration.h
@@ -763,6 +763,9 @@
  *   (e.g., an inductive probe or a nozzle-based probe-switch.)
  */
 //#define FIX_MOUNTED_PROBE
+#if ENABLED(FIX_MOUNTED_PROBE)
+  //#define MANUAL_DEPLOY_STOW
+#endif
 
 /**
  * Z Servo Probe, such as an endstop switch on a rotating arm.
diff --git a/Marlin/src/config/examples/Creality/Ender-2/Configuration.h b/Marlin/src/config/examples/Creality/Ender-2/Configuration.h
index ea6b200b43..4be9a3d39b 100644
--- a/Marlin/src/config/examples/Creality/Ender-2/Configuration.h
+++ b/Marlin/src/config/examples/Creality/Ender-2/Configuration.h
@@ -757,6 +757,9 @@
  *   (e.g., an inductive probe or a nozzle-based probe-switch.)
  */
 //#define FIX_MOUNTED_PROBE
+#if ENABLED(FIX_MOUNTED_PROBE)
+  //#define MANUAL_DEPLOY_STOW
+#endif
 
 /**
  * Z Servo Probe, such as an endstop switch on a rotating arm.
diff --git a/Marlin/src/config/examples/Creality/Ender-3/Configuration.h b/Marlin/src/config/examples/Creality/Ender-3/Configuration.h
index ceea982953..0a1934c764 100644
--- a/Marlin/src/config/examples/Creality/Ender-3/Configuration.h
+++ b/Marlin/src/config/examples/Creality/Ender-3/Configuration.h
@@ -757,6 +757,9 @@
  *   (e.g., an inductive probe or a nozzle-based probe-switch.)
  */
 //#define FIX_MOUNTED_PROBE
+#if ENABLED(FIX_MOUNTED_PROBE)
+  //#define MANUAL_DEPLOY_STOW
+#endif
 
 /**
  * Z Servo Probe, such as an endstop switch on a rotating arm.
diff --git a/Marlin/src/config/examples/Creality/Ender-4/Configuration.h b/Marlin/src/config/examples/Creality/Ender-4/Configuration.h
index 2911be3bd1..106209a5f0 100644
--- a/Marlin/src/config/examples/Creality/Ender-4/Configuration.h
+++ b/Marlin/src/config/examples/Creality/Ender-4/Configuration.h
@@ -763,6 +763,9 @@
  *   (e.g., an inductive probe or a nozzle-based probe-switch.)
  */
 //#define FIX_MOUNTED_PROBE
+#if ENABLED(FIX_MOUNTED_PROBE)
+  //#define MANUAL_DEPLOY_STOW
+#endif
 
 /**
  * Z Servo Probe, such as an endstop switch on a rotating arm.
diff --git a/Marlin/src/config/examples/Einstart-S/Configuration.h b/Marlin/src/config/examples/Einstart-S/Configuration.h
index ea5d8ad800..f08922b0fc 100644
--- a/Marlin/src/config/examples/Einstart-S/Configuration.h
+++ b/Marlin/src/config/examples/Einstart-S/Configuration.h
@@ -764,6 +764,9 @@
  *   (e.g., an inductive probe or a nozzle-based probe-switch.)
  */
 //#define FIX_MOUNTED_PROBE
+#if ENABLED(FIX_MOUNTED_PROBE)
+  //#define MANUAL_DEPLOY_STOW
+#endif
 
 /**
  * Z Servo Probe, such as an endstop switch on a rotating arm.
diff --git a/Marlin/src/config/examples/Felix/Configuration.h b/Marlin/src/config/examples/Felix/Configuration.h
index 7ce734d2f0..0be1799634 100644
--- a/Marlin/src/config/examples/Felix/Configuration.h
+++ b/Marlin/src/config/examples/Felix/Configuration.h
@@ -735,6 +735,9 @@
  *   (e.g., an inductive probe or a nozzle-based probe-switch.)
  */
 //#define FIX_MOUNTED_PROBE
+#if ENABLED(FIX_MOUNTED_PROBE)
+  //#define MANUAL_DEPLOY_STOW
+#endif
 
 /**
  * Z Servo Probe, such as an endstop switch on a rotating arm.
diff --git a/Marlin/src/config/examples/Felix/DUAL/Configuration.h b/Marlin/src/config/examples/Felix/DUAL/Configuration.h
index 70ba627aa5..ab86a7a2bf 100644
--- a/Marlin/src/config/examples/Felix/DUAL/Configuration.h
+++ b/Marlin/src/config/examples/Felix/DUAL/Configuration.h
@@ -735,6 +735,9 @@
  *   (e.g., an inductive probe or a nozzle-based probe-switch.)
  */
 //#define FIX_MOUNTED_PROBE
+#if ENABLED(FIX_MOUNTED_PROBE)
+  //#define MANUAL_DEPLOY_STOW
+#endif
 
 /**
  * Z Servo Probe, such as an endstop switch on a rotating arm.
diff --git a/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration.h b/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration.h
index 51985ebfc0..541eec0cd7 100644
--- a/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration.h
+++ b/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration.h
@@ -759,6 +759,9 @@
  *   (e.g., an inductive probe or a nozzle-based probe-switch.)
  */
 //#define FIX_MOUNTED_PROBE
+#if ENABLED(FIX_MOUNTED_PROBE)
+  //#define MANUAL_DEPLOY_STOW
+#endif
 
 /**
  * Z Servo Probe, such as an endstop switch on a rotating arm.
diff --git a/Marlin/src/config/examples/Formbot/T-Rex_2+/Configuration.h b/Marlin/src/config/examples/Formbot/T-Rex_2+/Configuration.h
index 5d24c42e06..4df745f433 100644
--- a/Marlin/src/config/examples/Formbot/T-Rex_2+/Configuration.h
+++ b/Marlin/src/config/examples/Formbot/T-Rex_2+/Configuration.h
@@ -777,6 +777,9 @@
  *   (e.g., an inductive probe or a nozzle-based probe-switch.)
  */
 //#define FIX_MOUNTED_PROBE
+#if ENABLED(FIX_MOUNTED_PROBE)
+  //#define MANUAL_DEPLOY_STOW
+#endif
 
 /**
  * Z Servo Probe, such as an endstop switch on a rotating arm.
diff --git a/Marlin/src/config/examples/Formbot/T_Rex_3/Configuration.h b/Marlin/src/config/examples/Formbot/T_Rex_3/Configuration.h
index ab335eb7b1..fd08ffb14c 100644
--- a/Marlin/src/config/examples/Formbot/T_Rex_3/Configuration.h
+++ b/Marlin/src/config/examples/Formbot/T_Rex_3/Configuration.h
@@ -788,6 +788,9 @@
  *   (e.g., an inductive probe or a nozzle-based probe-switch.)
  */
 //#define FIX_MOUNTED_PROBE
+#if ENABLED(FIX_MOUNTED_PROBE)
+  //#define MANUAL_DEPLOY_STOW
+#endif
 
 /**
  * Z Servo Probe, such as an endstop switch on a rotating arm.
diff --git a/Marlin/src/config/examples/Geeetech/GT2560/Configuration.h b/Marlin/src/config/examples/Geeetech/GT2560/Configuration.h
index 4c6062140a..89ffbbac59 100644
--- a/Marlin/src/config/examples/Geeetech/GT2560/Configuration.h
+++ b/Marlin/src/config/examples/Geeetech/GT2560/Configuration.h
@@ -768,6 +768,9 @@
  *   (e.g., an inductive probe or a nozzle-based probe-switch.)
  */
 //#define FIX_MOUNTED_PROBE
+#if ENABLED(FIX_MOUNTED_PROBE)
+  //#define MANUAL_DEPLOY_STOW
+#endif
 
 /**
  * Z Servo Probe, such as an endstop switch on a rotating arm.
diff --git a/Marlin/src/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h b/Marlin/src/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h
index 3510f8e631..616c033e80 100644
--- a/Marlin/src/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h
+++ b/Marlin/src/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h
@@ -753,6 +753,9 @@
  *   (e.g., an inductive probe or a nozzle-based probe-switch.)
  */
 //#define FIX_MOUNTED_PROBE
+#if ENABLED(FIX_MOUNTED_PROBE)
+  //#define MANUAL_DEPLOY_STOW
+#endif
 
 /**
  * Z Servo Probe, such as an endstop switch on a rotating arm.
diff --git a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h
index 2bf7defcf8..d18dee940c 100644
--- a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h	
+++ b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h	
@@ -769,6 +769,9 @@
  *   (e.g., an inductive probe or a nozzle-based probe-switch.)
  */
 //#define FIX_MOUNTED_PROBE
+#if ENABLED(FIX_MOUNTED_PROBE)
+  //#define MANUAL_DEPLOY_STOW
+#endif
 
 /**
  * Z Servo Probe, such as an endstop switch on a rotating arm.
diff --git a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h
index 82a9300b72..42b38a95e8 100644
--- a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h	
+++ b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h	
@@ -768,6 +768,9 @@
  *   (e.g., an inductive probe or a nozzle-based probe-switch.)
  */
 //#define FIX_MOUNTED_PROBE
+#if ENABLED(FIX_MOUNTED_PROBE)
+  //#define MANUAL_DEPLOY_STOW
+#endif
 
 /**
  * Z Servo Probe, such as an endstop switch on a rotating arm.
diff --git a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h
index b7939f0d54..1614eadbae 100644
--- a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h	
+++ b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h	
@@ -753,6 +753,9 @@
  *   (e.g., an inductive probe or a nozzle-based probe-switch.)
  */
 //#define FIX_MOUNTED_PROBE
+#if ENABLED(FIX_MOUNTED_PROBE)
+  //#define MANUAL_DEPLOY_STOW
+#endif
 
 /**
  * Z Servo Probe, such as an endstop switch on a rotating arm.
diff --git a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h
index d66b4d9f95..56da7b4fce 100644
--- a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h	
+++ b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h	
@@ -753,6 +753,9 @@
  *   (e.g., an inductive probe or a nozzle-based probe-switch.)
  */
 //#define FIX_MOUNTED_PROBE
+#if ENABLED(FIX_MOUNTED_PROBE)
+  //#define MANUAL_DEPLOY_STOW
+#endif
 
 /**
  * Z Servo Probe, such as an endstop switch on a rotating arm.
diff --git a/Marlin/src/config/examples/Infitary/i3-M508/Configuration.h b/Marlin/src/config/examples/Infitary/i3-M508/Configuration.h
index affa292e63..ac98f9d1d0 100644
--- a/Marlin/src/config/examples/Infitary/i3-M508/Configuration.h
+++ b/Marlin/src/config/examples/Infitary/i3-M508/Configuration.h
@@ -757,6 +757,9 @@
  *   (e.g., an inductive probe or a nozzle-based probe-switch.)
  */
 //#define FIX_MOUNTED_PROBE
+#if ENABLED(FIX_MOUNTED_PROBE)
+  //#define MANUAL_DEPLOY_STOW
+#endif
 
 /**
  * Z Servo Probe, such as an endstop switch on a rotating arm.
diff --git a/Marlin/src/config/examples/JGAurora/A5/Configuration.h b/Marlin/src/config/examples/JGAurora/A5/Configuration.h
index b6faa33d1f..db408b30ea 100644
--- a/Marlin/src/config/examples/JGAurora/A5/Configuration.h
+++ b/Marlin/src/config/examples/JGAurora/A5/Configuration.h
@@ -765,6 +765,9 @@
  *   (e.g., an inductive probe or a nozzle-based probe-switch.)
  */
 //#define FIX_MOUNTED_PROBE
+#if ENABLED(FIX_MOUNTED_PROBE)
+  //#define MANUAL_DEPLOY_STOW
+#endif
 
 /**
  * Z Servo Probe, such as an endstop switch on a rotating arm.
diff --git a/Marlin/src/config/examples/MakerParts/Configuration.h b/Marlin/src/config/examples/MakerParts/Configuration.h
index d8794de795..867da642e5 100644
--- a/Marlin/src/config/examples/MakerParts/Configuration.h
+++ b/Marlin/src/config/examples/MakerParts/Configuration.h
@@ -773,6 +773,9 @@
  *   (e.g., an inductive probe or a nozzle-based probe-switch.)
  */
 //#define FIX_MOUNTED_PROBE
+#if ENABLED(FIX_MOUNTED_PROBE)
+  //#define MANUAL_DEPLOY_STOW
+#endif
 
 /**
  * Z Servo Probe, such as an endstop switch on a rotating arm.
diff --git a/Marlin/src/config/examples/Malyan/M150/Configuration.h b/Marlin/src/config/examples/Malyan/M150/Configuration.h
index 03204f2054..02f5ae0419 100644
--- a/Marlin/src/config/examples/Malyan/M150/Configuration.h
+++ b/Marlin/src/config/examples/Malyan/M150/Configuration.h
@@ -745,6 +745,9 @@
  *   (e.g., an inductive probe or a nozzle-based probe-switch.)
  */
 //#define FIX_MOUNTED_PROBE
+#if ENABLED(FIX_MOUNTED_PROBE)
+  //#define MANUAL_DEPLOY_STOW
+#endif
 
 /**
  * Z Servo Probe, such as an endstop switch on a rotating arm.
diff --git a/Marlin/src/config/examples/Malyan/M200/Configuration.h b/Marlin/src/config/examples/Malyan/M200/Configuration.h
index 58758c8e5a..1e407e9abd 100644
--- a/Marlin/src/config/examples/Malyan/M200/Configuration.h
+++ b/Marlin/src/config/examples/Malyan/M200/Configuration.h
@@ -752,6 +752,9 @@
  *   (e.g., an inductive probe or a nozzle-based probe-switch.)
  */
 //#define FIX_MOUNTED_PROBE
+#if ENABLED(FIX_MOUNTED_PROBE)
+  //#define MANUAL_DEPLOY_STOW
+#endif
 
 /**
  * Z Servo Probe, such as an endstop switch on a rotating arm.
diff --git a/Marlin/src/config/examples/Micromake/C1/basic/Configuration.h b/Marlin/src/config/examples/Micromake/C1/basic/Configuration.h
index 5e72a3f32f..f03c90f1e2 100644
--- a/Marlin/src/config/examples/Micromake/C1/basic/Configuration.h
+++ b/Marlin/src/config/examples/Micromake/C1/basic/Configuration.h
@@ -757,6 +757,9 @@
  *   (e.g., an inductive probe or a nozzle-based probe-switch.)
  */
 //#define FIX_MOUNTED_PROBE
+#if ENABLED(FIX_MOUNTED_PROBE)
+  //#define MANUAL_DEPLOY_STOW
+#endif
 
 /**
  * Z Servo Probe, such as an endstop switch on a rotating arm.
diff --git a/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration.h b/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration.h
index 4891ff9425..4d6dea22c6 100644
--- a/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration.h
+++ b/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration.h
@@ -757,6 +757,9 @@
  *   (e.g., an inductive probe or a nozzle-based probe-switch.)
  */
 #define FIX_MOUNTED_PROBE
+#if ENABLED(FIX_MOUNTED_PROBE)
+  //#define MANUAL_DEPLOY_STOW
+#endif
 
 /**
  * Z Servo Probe, such as an endstop switch on a rotating arm.
diff --git a/Marlin/src/config/examples/Mks/Sbase/Configuration.h b/Marlin/src/config/examples/Mks/Sbase/Configuration.h
index 211858d1c1..2a18893d08 100644
--- a/Marlin/src/config/examples/Mks/Sbase/Configuration.h
+++ b/Marlin/src/config/examples/Mks/Sbase/Configuration.h
@@ -753,6 +753,9 @@
  *   (e.g., an inductive probe or a nozzle-based probe-switch.)
  */
 //#define FIX_MOUNTED_PROBE
+#if ENABLED(FIX_MOUNTED_PROBE)
+  //#define MANUAL_DEPLOY_STOW
+#endif
 
 /**
  * Z Servo Probe, such as an endstop switch on a rotating arm.
diff --git a/Marlin/src/config/examples/RepRapPro/Huxley/Configuration.h b/Marlin/src/config/examples/RepRapPro/Huxley/Configuration.h
index 8905de294b..caa10e5111 100644
--- a/Marlin/src/config/examples/RepRapPro/Huxley/Configuration.h
+++ b/Marlin/src/config/examples/RepRapPro/Huxley/Configuration.h
@@ -793,6 +793,9 @@ Black rubber belt(MXL), 18 - tooth aluminium pulley : 87.489 step per mm (Huxley
  *   (e.g., an inductive probe or a nozzle-based probe-switch.)
  */
 //#define FIX_MOUNTED_PROBE
+#if ENABLED(FIX_MOUNTED_PROBE)
+  //#define MANUAL_DEPLOY_STOW
+#endif
 
 /**
  * Z Servo Probe, such as an endstop switch on a rotating arm.
diff --git a/Marlin/src/config/examples/RepRapWorld/Megatronics/Configuration.h b/Marlin/src/config/examples/RepRapWorld/Megatronics/Configuration.h
index 11b157751b..2abb3afdcd 100644
--- a/Marlin/src/config/examples/RepRapWorld/Megatronics/Configuration.h
+++ b/Marlin/src/config/examples/RepRapWorld/Megatronics/Configuration.h
@@ -753,6 +753,9 @@
  *   (e.g., an inductive probe or a nozzle-based probe-switch.)
  */
 //#define FIX_MOUNTED_PROBE
+#if ENABLED(FIX_MOUNTED_PROBE)
+  //#define MANUAL_DEPLOY_STOW
+#endif
 
 /**
  * Z Servo Probe, such as an endstop switch on a rotating arm.
diff --git a/Marlin/src/config/examples/RigidBot/Configuration.h b/Marlin/src/config/examples/RigidBot/Configuration.h
index 5198fbf0c0..8c48245300 100644
--- a/Marlin/src/config/examples/RigidBot/Configuration.h
+++ b/Marlin/src/config/examples/RigidBot/Configuration.h
@@ -751,6 +751,9 @@
  *   (e.g., an inductive probe or a nozzle-based probe-switch.)
  */
 //#define FIX_MOUNTED_PROBE
+#if ENABLED(FIX_MOUNTED_PROBE)
+  //#define MANUAL_DEPLOY_STOW
+#endif
 
 /**
  * Z Servo Probe, such as an endstop switch on a rotating arm.
diff --git a/Marlin/src/config/examples/SCARA/Configuration.h b/Marlin/src/config/examples/SCARA/Configuration.h
index b62c767273..9776b9a8a2 100644
--- a/Marlin/src/config/examples/SCARA/Configuration.h
+++ b/Marlin/src/config/examples/SCARA/Configuration.h
@@ -766,6 +766,9 @@
  *   (e.g., an inductive probe or a nozzle-based probe-switch.)
  */
 //#define FIX_MOUNTED_PROBE
+#if ENABLED(FIX_MOUNTED_PROBE)
+  //#define MANUAL_DEPLOY_STOW
+#endif
 
 /**
  * Z Servo Probe, such as an endstop switch on a rotating arm.
diff --git a/Marlin/src/config/examples/STM32F10/Configuration.h b/Marlin/src/config/examples/STM32F10/Configuration.h
index c8e9dba704..ec6e446208 100644
--- a/Marlin/src/config/examples/STM32F10/Configuration.h
+++ b/Marlin/src/config/examples/STM32F10/Configuration.h
@@ -755,6 +755,9 @@
  *   (e.g., an inductive probe or a nozzle-based probe-switch.)
  */
 //#define FIX_MOUNTED_PROBE
+#if ENABLED(FIX_MOUNTED_PROBE)
+  //#define MANUAL_DEPLOY_STOW
+#endif
 
 /**
  * Z Servo Probe, such as an endstop switch on a rotating arm.
diff --git a/Marlin/src/config/examples/STM32F4/Configuration.h b/Marlin/src/config/examples/STM32F4/Configuration.h
index b465ffbb42..edb65465d4 100644
--- a/Marlin/src/config/examples/STM32F4/Configuration.h
+++ b/Marlin/src/config/examples/STM32F4/Configuration.h
@@ -753,6 +753,9 @@
  *   (e.g., an inductive probe or a nozzle-based probe-switch.)
  */
 //#define FIX_MOUNTED_PROBE
+#if ENABLED(FIX_MOUNTED_PROBE)
+  //#define MANUAL_DEPLOY_STOW
+#endif
 
 /**
  * Z Servo Probe, such as an endstop switch on a rotating arm.
diff --git a/Marlin/src/config/examples/Sanguinololu/Configuration.h b/Marlin/src/config/examples/Sanguinololu/Configuration.h
index 8f393e3369..ec6e59230b 100644
--- a/Marlin/src/config/examples/Sanguinololu/Configuration.h
+++ b/Marlin/src/config/examples/Sanguinololu/Configuration.h
@@ -784,6 +784,9 @@
  *   (e.g., an inductive probe or a nozzle-based probe-switch.)
  */
 //#define FIX_MOUNTED_PROBE
+#if ENABLED(FIX_MOUNTED_PROBE)
+  //#define MANUAL_DEPLOY_STOW
+#endif
 
 /**
  * Z Servo Probe, such as an endstop switch on a rotating arm.
diff --git a/Marlin/src/config/examples/TheBorg/Configuration.h b/Marlin/src/config/examples/TheBorg/Configuration.h
index 5c398454b4..4c318e5949 100644
--- a/Marlin/src/config/examples/TheBorg/Configuration.h
+++ b/Marlin/src/config/examples/TheBorg/Configuration.h
@@ -753,6 +753,9 @@
  *   (e.g., an inductive probe or a nozzle-based probe-switch.)
  */
 #define FIX_MOUNTED_PROBE
+#if ENABLED(FIX_MOUNTED_PROBE)
+  //#define MANUAL_DEPLOY_STOW
+#endif
 
 /**
  * Z Servo Probe, such as an endstop switch on a rotating arm.
diff --git a/Marlin/src/config/examples/TinyBoy2/Configuration.h b/Marlin/src/config/examples/TinyBoy2/Configuration.h
index 242ed7dca9..0e97820d9d 100644
--- a/Marlin/src/config/examples/TinyBoy2/Configuration.h
+++ b/Marlin/src/config/examples/TinyBoy2/Configuration.h
@@ -804,6 +804,9 @@
  *   (e.g., an inductive probe or a nozzle-based probe-switch.)
  */
 //#define FIX_MOUNTED_PROBE
+#if ENABLED(FIX_MOUNTED_PROBE)
+  //#define MANUAL_DEPLOY_STOW
+#endif
 
 /**
  * Z Servo Probe, such as an endstop switch on a rotating arm.
diff --git a/Marlin/src/config/examples/Tronxy/X1/Configuration.h b/Marlin/src/config/examples/Tronxy/X1/Configuration.h
index 5523705e9b..c8d30a29d2 100644
--- a/Marlin/src/config/examples/Tronxy/X1/Configuration.h
+++ b/Marlin/src/config/examples/Tronxy/X1/Configuration.h
@@ -753,6 +753,9 @@
  *   (e.g., an inductive probe or a nozzle-based probe-switch.)
  */
 //#define FIX_MOUNTED_PROBE
+#if ENABLED(FIX_MOUNTED_PROBE)
+  //#define MANUAL_DEPLOY_STOW
+#endif
 
 /**
  * Z Servo Probe, such as an endstop switch on a rotating arm.
diff --git a/Marlin/src/config/examples/Tronxy/X3A/Configuration.h b/Marlin/src/config/examples/Tronxy/X3A/Configuration.h
index ce5548f981..e902d288d0 100644
--- a/Marlin/src/config/examples/Tronxy/X3A/Configuration.h
+++ b/Marlin/src/config/examples/Tronxy/X3A/Configuration.h
@@ -753,6 +753,9 @@
  *   (e.g., an inductive probe or a nozzle-based probe-switch.)
  */
 #define FIX_MOUNTED_PROBE
+#if ENABLED(FIX_MOUNTED_PROBE)
+  //#define MANUAL_DEPLOY_STOW
+#endif
 
 /**
  * Z Servo Probe, such as an endstop switch on a rotating arm.
diff --git a/Marlin/src/config/examples/Tronxy/X5S/Configuration.h b/Marlin/src/config/examples/Tronxy/X5S/Configuration.h
index c19cf90870..cbd5ebc588 100644
--- a/Marlin/src/config/examples/Tronxy/X5S/Configuration.h
+++ b/Marlin/src/config/examples/Tronxy/X5S/Configuration.h
@@ -753,6 +753,9 @@
  *   (e.g., an inductive probe or a nozzle-based probe-switch.)
  */
 //#define FIX_MOUNTED_PROBE
+#if ENABLED(FIX_MOUNTED_PROBE)
+  //#define MANUAL_DEPLOY_STOW
+#endif
 
 /**
  * Z Servo Probe, such as an endstop switch on a rotating arm.
diff --git a/Marlin/src/config/examples/Tronxy/XY100/Configuration.h b/Marlin/src/config/examples/Tronxy/XY100/Configuration.h
index ca95bb4231..705bdd90d9 100644
--- a/Marlin/src/config/examples/Tronxy/XY100/Configuration.h
+++ b/Marlin/src/config/examples/Tronxy/XY100/Configuration.h
@@ -764,6 +764,9 @@
  *   (e.g., an inductive probe or a nozzle-based probe-switch.)
  */
 //#define FIX_MOUNTED_PROBE
+#if ENABLED(FIX_MOUNTED_PROBE)
+  //#define MANUAL_DEPLOY_STOW
+#endif
 
 /**
  * Z Servo Probe, such as an endstop switch on a rotating arm.
diff --git a/Marlin/src/config/examples/UltiMachine/Archim2/Configuration.h b/Marlin/src/config/examples/UltiMachine/Archim2/Configuration.h
index 760a6a4ced..e5a5e69aaa 100644
--- a/Marlin/src/config/examples/UltiMachine/Archim2/Configuration.h
+++ b/Marlin/src/config/examples/UltiMachine/Archim2/Configuration.h
@@ -753,6 +753,9 @@
  *   (e.g., an inductive probe or a nozzle-based probe-switch.)
  */
 //#define FIX_MOUNTED_PROBE
+#if ENABLED(FIX_MOUNTED_PROBE)
+  //#define MANUAL_DEPLOY_STOW
+#endif
 
 /**
  * Z Servo Probe, such as an endstop switch on a rotating arm.
diff --git a/Marlin/src/config/examples/Velleman/K8200/Configuration.h b/Marlin/src/config/examples/Velleman/K8200/Configuration.h
index 3e8b3c324e..ca3ce5fb38 100644
--- a/Marlin/src/config/examples/Velleman/K8200/Configuration.h
+++ b/Marlin/src/config/examples/Velleman/K8200/Configuration.h
@@ -782,6 +782,9 @@
  *   (e.g., an inductive probe or a nozzle-based probe-switch.)
  */
 //#define FIX_MOUNTED_PROBE
+#if ENABLED(FIX_MOUNTED_PROBE)
+  //#define MANUAL_DEPLOY_STOW
+#endif
 
 /**
  * Z Servo Probe, such as an endstop switch on a rotating arm.
diff --git a/Marlin/src/config/examples/Velleman/K8400/Configuration.h b/Marlin/src/config/examples/Velleman/K8400/Configuration.h
index 7f1fbc59d8..cb44eadb1a 100644
--- a/Marlin/src/config/examples/Velleman/K8400/Configuration.h
+++ b/Marlin/src/config/examples/Velleman/K8400/Configuration.h
@@ -753,6 +753,9 @@
  *   (e.g., an inductive probe or a nozzle-based probe-switch.)
  */
 //#define FIX_MOUNTED_PROBE
+#if ENABLED(FIX_MOUNTED_PROBE)
+  //#define MANUAL_DEPLOY_STOW
+#endif
 
 /**
  * Z Servo Probe, such as an endstop switch on a rotating arm.
diff --git a/Marlin/src/config/examples/Velleman/K8400/Dual-head/Configuration.h b/Marlin/src/config/examples/Velleman/K8400/Dual-head/Configuration.h
index 00b7487256..8c0a7ddb0e 100644
--- a/Marlin/src/config/examples/Velleman/K8400/Dual-head/Configuration.h
+++ b/Marlin/src/config/examples/Velleman/K8400/Dual-head/Configuration.h
@@ -753,6 +753,9 @@
  *   (e.g., an inductive probe or a nozzle-based probe-switch.)
  */
 //#define FIX_MOUNTED_PROBE
+#if ENABLED(FIX_MOUNTED_PROBE)
+  //#define MANUAL_DEPLOY_STOW
+#endif
 
 /**
  * Z Servo Probe, such as an endstop switch on a rotating arm.
diff --git a/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration.h b/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration.h
index 908dc67dc2..40d16901a6 100644
--- a/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration.h	
+++ b/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration.h	
@@ -763,6 +763,9 @@
  *   (e.g., an inductive probe or a nozzle-based probe-switch.)
  */
 //#define FIX_MOUNTED_PROBE
+#if ENABLED(FIX_MOUNTED_PROBE)
+  //#define MANUAL_DEPLOY_STOW
+#endif
 
 /**
  * Z Servo Probe, such as an endstop switch on a rotating arm.
diff --git a/Marlin/src/config/examples/adafruit/ST7565/Configuration.h b/Marlin/src/config/examples/adafruit/ST7565/Configuration.h
index 25c8404f10..4323a3e420 100644
--- a/Marlin/src/config/examples/adafruit/ST7565/Configuration.h
+++ b/Marlin/src/config/examples/adafruit/ST7565/Configuration.h
@@ -753,6 +753,9 @@
  *   (e.g., an inductive probe or a nozzle-based probe-switch.)
  */
 //#define FIX_MOUNTED_PROBE
+#if ENABLED(FIX_MOUNTED_PROBE)
+  //#define MANUAL_DEPLOY_STOW
+#endif
 
 /**
  * Z Servo Probe, such as an endstop switch on a rotating arm.
diff --git a/Marlin/src/config/examples/delta/Anycubic/Kossel/Configuration.h b/Marlin/src/config/examples/delta/Anycubic/Kossel/Configuration.h
index 359f50ae31..1ac25e7232 100644
--- a/Marlin/src/config/examples/delta/Anycubic/Kossel/Configuration.h
+++ b/Marlin/src/config/examples/delta/Anycubic/Kossel/Configuration.h
@@ -672,7 +672,11 @@
 #define X_MAX_ENDSTOP_INVERTING false  // set to true to invert the logic of the endstop.
 #define Y_MAX_ENDSTOP_INVERTING false  // set to true to invert the logic of the endstop.
 #define Z_MAX_ENDSTOP_INVERTING false  // set to true to invert the logic of the endstop.
-#define Z_MIN_PROBE_ENDSTOP_INVERTING true  // set to true to invert the logic of the probe.
+#if ANYCUBIC_PROBE_VERSION == 1
+  #define Z_MIN_PROBE_ENDSTOP_INVERTING false  // V1 Probe is NC
+#elif ANYCUBIC_PROBE_VERSION == 2
+  #define Z_MIN_PROBE_ENDSTOP_INVERTING true  // V2 Probe is NO
+#endif
 
 /**
  * Stepper Drivers
@@ -871,6 +875,9 @@
  */
 #if ANYCUBIC_PROBE_VERSION > 0
   #define FIX_MOUNTED_PROBE
+#if ENABLED(FIX_MOUNTED_PROBE)
+  #define MANUAL_DEPLOY_STOW
+#endif
 #endif
 
 /**
@@ -934,12 +941,12 @@
 #define X_PROBE_OFFSET_FROM_EXTRUDER 0     // X offset: -left  +right  [of the nozzle]
 #define Y_PROBE_OFFSET_FROM_EXTRUDER 0     // Y offset: -front +behind [the nozzle]
 
-#if ANYCUBIC_PROBE_VERSION == 0
-  #define Z_PROBE_OFFSET_FROM_EXTRUDER 0     // Z offset: -below +above  [the nozzle]
+#if ANYCUBIC_PROBE_VERSION == 2
+  #define Z_PROBE_OFFSET_FROM_EXTRUDER -16.8     // Z offset: -below +above  [the nozzle]
 #elif ANYCUBIC_PROBE_VERSION == 1
   #define Z_PROBE_OFFSET_FROM_EXTRUDER -19.0 // Z offset: -below +above  [the nozzle]
 #else
-  #define Z_PROBE_OFFSET_FROM_EXTRUDER -16.8 // Z offset: -below +above  [the nozzle]
+  #define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above  [the nozzle]
 #endif
 
 // Certain types of probes need to stay away from edges
@@ -1020,10 +1027,10 @@
  * Example: `M851 Z-5` with a CLEARANCE of 4  =>  9mm from bed to nozzle.
  *     But: `M851 Z+1` with a CLEARANCE of 2  =>  2mm from bed to nozzle.
  */
-#define Z_CLEARANCE_DEPLOY_PROBE   10 // Z Clearance for Deploy/Stow
-#define Z_CLEARANCE_BETWEEN_PROBES 25 // Z Clearance between probe points
-#define Z_CLEARANCE_MULTI_PROBE    25 // Z Clearance between multiple probes
-#define Z_AFTER_PROBING            30 // Z position after probing is done
+#define Z_CLEARANCE_DEPLOY_PROBE   30 // Z Clearance for Deploy/Stow
+#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points
+#define Z_CLEARANCE_MULTI_PROBE    5 // Z Clearance between multiple probes
+#define Z_AFTER_PROBING            5 // Z position after probing is done
 
 #define Z_PROBE_LOW_POINT          -2 // Farthest distance below the trigger-point to go before stopping
 
diff --git a/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration.h b/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration.h
index 8199d3d1c1..1f8d149a43 100644
--- a/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration.h
+++ b/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration.h
@@ -835,6 +835,9 @@
  *   (e.g., an inductive probe or a nozzle-based probe-switch.)
  */
 #define FIX_MOUNTED_PROBE
+#if ENABLED(FIX_MOUNTED_PROBE)
+  //#define MANUAL_DEPLOY_STOW
+#endif
 
 /**
  * Z Servo Probe, such as an endstop switch on a rotating arm.
diff --git a/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration.h b/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration.h
index 0807de59be..41a7299874 100644
--- a/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration.h
+++ b/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration.h
@@ -835,6 +835,9 @@
  *   (e.g., an inductive probe or a nozzle-based probe-switch.)
  */
 #define FIX_MOUNTED_PROBE
+#if ENABLED(FIX_MOUNTED_PROBE)
+  //#define MANUAL_DEPLOY_STOW
+#endif
 
 /**
  * Z Servo Probe, such as an endstop switch on a rotating arm.
diff --git a/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration.h b/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration.h
index 286bdb1a5e..5e7b54d0a2 100644
--- a/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration.h
+++ b/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration.h
@@ -835,6 +835,9 @@
  *   (e.g., an inductive probe or a nozzle-based probe-switch.)
  */
 #define FIX_MOUNTED_PROBE
+#if ENABLED(FIX_MOUNTED_PROBE)
+  //#define MANUAL_DEPLOY_STOW
+#endif
 
 /**
  * Z Servo Probe, such as an endstop switch on a rotating arm.
diff --git a/Marlin/src/config/examples/delta/Hatchbox_Alpha/Configuration.h b/Marlin/src/config/examples/delta/Hatchbox_Alpha/Configuration.h
index e13482c998..3bba948f49 100644
--- a/Marlin/src/config/examples/delta/Hatchbox_Alpha/Configuration.h
+++ b/Marlin/src/config/examples/delta/Hatchbox_Alpha/Configuration.h
@@ -840,6 +840,9 @@
  *   (e.g., an inductive probe or a nozzle-based probe-switch.)
  */
 #define FIX_MOUNTED_PROBE
+#if ENABLED(FIX_MOUNTED_PROBE)
+  //#define MANUAL_DEPLOY_STOW
+#endif
 
 /**
  * Z Servo Probe, such as an endstop switch on a rotating arm.
diff --git a/Marlin/src/config/examples/delta/generic/Configuration.h b/Marlin/src/config/examples/delta/generic/Configuration.h
index 13545a262a..38beaf6488 100644
--- a/Marlin/src/config/examples/delta/generic/Configuration.h
+++ b/Marlin/src/config/examples/delta/generic/Configuration.h
@@ -825,6 +825,9 @@
  *   (e.g., an inductive probe or a nozzle-based probe-switch.)
  */
 //#define FIX_MOUNTED_PROBE
+#if ENABLED(FIX_MOUNTED_PROBE)
+  //#define MANUAL_DEPLOY_STOW
+#endif
 
 /**
  * Z Servo Probe, such as an endstop switch on a rotating arm.
diff --git a/Marlin/src/config/examples/delta/kossel_mini/Configuration.h b/Marlin/src/config/examples/delta/kossel_mini/Configuration.h
index e3a9ae3ef3..d55eabcc7a 100644
--- a/Marlin/src/config/examples/delta/kossel_mini/Configuration.h
+++ b/Marlin/src/config/examples/delta/kossel_mini/Configuration.h
@@ -825,6 +825,9 @@
  *   (e.g., an inductive probe or a nozzle-based probe-switch.)
  */
 //#define FIX_MOUNTED_PROBE
+#if ENABLED(FIX_MOUNTED_PROBE)
+  //#define MANUAL_DEPLOY_STOW
+#endif
 
 /**
  * Z Servo Probe, such as an endstop switch on a rotating arm.
diff --git a/Marlin/src/config/examples/delta/kossel_pro/Configuration.h b/Marlin/src/config/examples/delta/kossel_pro/Configuration.h
index 8d06fbe266..926dcb1ddf 100644
--- a/Marlin/src/config/examples/delta/kossel_pro/Configuration.h
+++ b/Marlin/src/config/examples/delta/kossel_pro/Configuration.h
@@ -818,6 +818,9 @@
  *   (e.g., an inductive probe or a nozzle-based probe-switch.)
  */
 //#define FIX_MOUNTED_PROBE
+#if ENABLED(FIX_MOUNTED_PROBE)
+  //#define MANUAL_DEPLOY_STOW
+#endif
 
 /**
  * Z Servo Probe, such as an endstop switch on a rotating arm.
diff --git a/Marlin/src/config/examples/delta/kossel_xl/Configuration.h b/Marlin/src/config/examples/delta/kossel_xl/Configuration.h
index 4b730f0dcc..cbab083ead 100644
--- a/Marlin/src/config/examples/delta/kossel_xl/Configuration.h
+++ b/Marlin/src/config/examples/delta/kossel_xl/Configuration.h
@@ -828,6 +828,9 @@
  *   (e.g., an inductive probe or a nozzle-based probe-switch.)
  */
 #define FIX_MOUNTED_PROBE
+#if ENABLED(FIX_MOUNTED_PROBE)
+  //#define MANUAL_DEPLOY_STOW
+#endif
 
 /**
  * Z Servo Probe, such as an endstop switch on a rotating arm.
diff --git a/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration.h b/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration.h
index 1ef9e26aa9..0ed4fe3c82 100644
--- a/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration.h
+++ b/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration.h
@@ -766,6 +766,9 @@
  *   (e.g., an inductive probe or a nozzle-based probe-switch.)
  */
 //#define FIX_MOUNTED_PROBE
+#if ENABLED(FIX_MOUNTED_PROBE)
+  //#define MANUAL_DEPLOY_STOW
+#endif
 
 /**
  * Z Servo Probe, such as an endstop switch on a rotating arm.
diff --git a/Marlin/src/config/examples/makibox/Configuration.h b/Marlin/src/config/examples/makibox/Configuration.h
index c01e380fca..1bab0b4baa 100644
--- a/Marlin/src/config/examples/makibox/Configuration.h
+++ b/Marlin/src/config/examples/makibox/Configuration.h
@@ -756,6 +756,9 @@
  *   (e.g., an inductive probe or a nozzle-based probe-switch.)
  */
 //#define FIX_MOUNTED_PROBE
+#if ENABLED(FIX_MOUNTED_PROBE)
+  //#define MANUAL_DEPLOY_STOW
+#endif
 
 /**
  * Z Servo Probe, such as an endstop switch on a rotating arm.
diff --git a/Marlin/src/config/examples/stm32f103ret6/Configuration.h b/Marlin/src/config/examples/stm32f103ret6/Configuration.h
index a1a6c56a7c..cf400964ce 100644
--- a/Marlin/src/config/examples/stm32f103ret6/Configuration.h
+++ b/Marlin/src/config/examples/stm32f103ret6/Configuration.h
@@ -755,6 +755,9 @@
  *   (e.g., an inductive probe or a nozzle-based probe-switch.)
  */
 //#define FIX_MOUNTED_PROBE
+#if ENABLED(FIX_MOUNTED_PROBE)
+  //#define MANUAL_DEPLOY_STOW
+#endif
 
 /**
  * Z Servo Probe, such as an endstop switch on a rotating arm.
diff --git a/Marlin/src/config/examples/tvrrug/Round2/Configuration.h b/Marlin/src/config/examples/tvrrug/Round2/Configuration.h
index a7572abac9..ed16fd6dc5 100644
--- a/Marlin/src/config/examples/tvrrug/Round2/Configuration.h
+++ b/Marlin/src/config/examples/tvrrug/Round2/Configuration.h
@@ -748,6 +748,9 @@
  *   (e.g., an inductive probe or a nozzle-based probe-switch.)
  */
 //#define FIX_MOUNTED_PROBE
+#if ENABLED(FIX_MOUNTED_PROBE)
+  //#define MANUAL_DEPLOY_STOW
+#endif
 
 /**
  * Z Servo Probe, such as an endstop switch on a rotating arm.
diff --git a/Marlin/src/config/examples/wt150/Configuration.h b/Marlin/src/config/examples/wt150/Configuration.h
index 754a694f4d..fe879e29fd 100644
--- a/Marlin/src/config/examples/wt150/Configuration.h
+++ b/Marlin/src/config/examples/wt150/Configuration.h
@@ -758,6 +758,9 @@
  *   (e.g., an inductive probe or a nozzle-based probe-switch.)
  */
 //#define FIX_MOUNTED_PROBE
+#if ENABLED(FIX_MOUNTED_PROBE)
+  //#define MANUAL_DEPLOY_STOW
+#endif
 
 /**
  * Z Servo Probe, such as an endstop switch on a rotating arm.
diff --git a/Marlin/src/lcd/language/language_de.h b/Marlin/src/lcd/language/language_de.h
index 54c955ae95..3f8ad05fc8 100644
--- a/Marlin/src/lcd/language/language_de.h
+++ b/Marlin/src/lcd/language/language_de.h
@@ -198,6 +198,8 @@
 #define MSG_BLTOUCH_RESET                   _UxGT("BLTouch Reset")
 #define MSG_BLTOUCH_DEPLOY                  _UxGT("BLTouch ausfahren")
 #define MSG_BLTOUCH_STOW                    _UxGT("BLTouch einfahren")
+#define MSG_MANUAL_DEPLOY                   _UxGT("Z-Sensor anbringen")
+#define MSG_MANUAL_STOW                     _UxGT("Z-Sensor entfernen")
 #define MSG_HOME                            _UxGT("Vorher")  // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST
 #define MSG_FIRST                           _UxGT("homen")
 #define MSG_ZPROBE_ZOFFSET                  _UxGT("Z Versatz")
diff --git a/Marlin/src/lcd/language/language_en.h b/Marlin/src/lcd/language/language_en.h
index 536b28b027..687d4cc44d 100644
--- a/Marlin/src/lcd/language/language_en.h
+++ b/Marlin/src/lcd/language/language_en.h
@@ -810,6 +810,12 @@
 #ifndef MSG_BLTOUCH_STOW
   #define MSG_BLTOUCH_STOW                    _UxGT("Stow BLTouch")
 #endif
+#ifndef MSG_MANUAL_DEPLOY
+  #define MSG_MANUAL_DEPLOY                   _UxGT("Deploy Z-Probe")
+#endif
+#ifndef MSG_MANUAL_STOW
+  #define MSG_MANUAL_STOW                     _UxGT("Stow Z-Probe")
+#endif
 #ifndef MSG_HOME
   #define MSG_HOME                            _UxGT("Home") // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST
 #endif
diff --git a/Marlin/src/module/probe.cpp b/Marlin/src/module/probe.cpp
index c4d4bc22d4..43357d621d 100644
--- a/Marlin/src/module/probe.cpp
+++ b/Marlin/src/module/probe.cpp
@@ -28,6 +28,8 @@
 
 #if HAS_BED_PROBE
 
+#include "../libs/buzzer.h"
+
 #include "probe.h"
 #include "motion.h"
 #include "temperature.h"
@@ -377,7 +379,8 @@ bool set_probe_deployed(const bool deploy) {
 
   // Make room for probe to deploy (or stow)
   // Fix-mounted probe should only raise for deploy
-  #if ENABLED(FIX_MOUNTED_PROBE)
+  // unless MANUAL_DEPLOY_STOW is enabled
+  #if ENABLED(FIX_MOUNTED_PROBE) && DISABLED(MANUAL_DEPLOY_STOW)
     const bool deploy_stow_condition = deploy;
   #else
     constexpr bool deploy_stow_condition = true;
@@ -440,6 +443,26 @@ bool set_probe_deployed(const bool deploy) {
 
         deploy ? run_deploy_moves_script() : run_stow_moves_script();
 
+      #elif ENABLED(MANUAL_DEPLOY_STOW)
+
+        do_probe_raise(Z_CLEARANCE_DEPLOY_PROBE);
+
+        #if PIN_EXISTS(BEEPER) || ENABLED(LCD_USE_I2C_BUZZER)
+          BUZZ(100, 659);
+          BUZZ(100, 698);
+        #endif
+
+        const char * const ds_str = deploy ? PSTR(MSG_MANUAL_DEPLOY) : PSTR(MSG_MANUAL_STOW);
+        lcd_setalertstatusPGM(ds_str);
+        serialprintPGM(ds_str);
+        SERIAL_EOL();
+
+        KEEPALIVE_STATE(PAUSED_FOR_USER);
+        wait_for_user = true;
+        while (wait_for_user) idle();
+        lcd_reset_status();
+        KEEPALIVE_STATE(IN_HANDLER);
+
       #endif
 
   #ifdef _TRIGGERED_WHEN_STOWED_TEST
diff --git a/buildroot/share/tests/megaatmega2560_tests b/buildroot/share/tests/megaatmega2560_tests
index d4857670d5..014dd6a4a6 100755
--- a/buildroot/share/tests/megaatmega2560_tests
+++ b/buildroot/share/tests/megaatmega2560_tests
@@ -291,7 +291,7 @@ exec_test $1 $2 "Delta Config (FLSUN AC because it's complex)"
 # SCARA with TMC2130
 #
 use_example_configs SCARA
-opt_enable AUTO_BED_LEVELING_BILINEAR FIX_MOUNTED_PROBE USE_ZMIN_PLUG EEPROM_SETTINGS EEPROM_CHITCHAT ULTIMAKERCONTROLLER
+opt_enable AUTO_BED_LEVELING_BILINEAR FIX_MOUNTED_PROBE MANUAL_DEPLOY_STOW USE_ZMIN_PLUG EEPROM_SETTINGS EEPROM_CHITCHAT ULTIMAKERCONTROLLER
 opt_set X_DRIVER_TYPE TMC2130
 opt_set Y_DRIVER_TYPE TMC2130
 opt_set Z_DRIVER_TYPE TMC2130