Clean up LCD conditionals, DWIN
This commit is contained in:
Scott Lahteine
7
Marlin/src/lcd/dwin/e3v2/README.md
Normal file
7
Marlin/src/lcd/dwin/e3v2/README.md
Normal file
@ -0,0 +1,7 @@
|
||||
# DWIN for Creality Ender 3 v2
|
||||
|
||||
Marlin's Ender 3 v2 support requires the `DWIN_SET` included with the Ender 3 V2 [example configuration](https://github.com/MarlinFirmware/Configurations/tree/bugfix-2.0.x/config/examples/Creality/Ender-3%20V2).
|
||||
|
||||
## Easy Install
|
||||
|
||||
Copy the `DWIN_SET` folder onto a Micro-SD card and insert the card into the slot on the DWIN screen. Cycle the machine and wait for the screen to go from blue to orange. Turn the machine off and remove the SD card. When you turn on the machine the screen will display a "Creality" loading screen.
|
||||
3576
Marlin/src/lcd/dwin/e3v2/dwin.cpp
Normal file
3576
Marlin/src/lcd/dwin/e3v2/dwin.cpp
Normal file
File diff suppressed because it is too large
Load Diff
364
Marlin/src/lcd/dwin/e3v2/dwin.h
Normal file
364
Marlin/src/lcd/dwin/e3v2/dwin.h
Normal file
@ -0,0 +1,364 @@
|
||||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <https://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
/**
|
||||
* DWIN by Creality3D
|
||||
*/
|
||||
|
||||
#include "../dwin_lcd.h"
|
||||
#include "rotary_encoder.h"
|
||||
#include "../../../libs/BL24CXX.h"
|
||||
|
||||
#include <stdint.h>
|
||||
|
||||
enum processID {
|
||||
// Process ID
|
||||
MainMenu,
|
||||
SelectFile,
|
||||
Prepare,
|
||||
Control,
|
||||
Leveling,
|
||||
PrintProcess,
|
||||
AxisMove,
|
||||
TemperatureID,
|
||||
Motion,
|
||||
Info,
|
||||
Tune,
|
||||
#if HAS_HOTEND
|
||||
PLAPreheat,
|
||||
ABSPreheat,
|
||||
#endif
|
||||
MaxSpeed,
|
||||
MaxSpeed_value,
|
||||
MaxAcceleration,
|
||||
MaxAcceleration_value,
|
||||
MaxCorner,
|
||||
MaxCorner_value,
|
||||
Step,
|
||||
Step_value,
|
||||
|
||||
// Last Process ID
|
||||
Last_Prepare,
|
||||
|
||||
// Back Process ID
|
||||
Back_Main,
|
||||
Back_Print,
|
||||
|
||||
// Date variable ID
|
||||
Move_X,
|
||||
Move_Y,
|
||||
Move_Z,
|
||||
#if HAS_HOTEND
|
||||
Extruder,
|
||||
ETemp,
|
||||
#endif
|
||||
Homeoffset,
|
||||
#if HAS_HEATED_BED
|
||||
BedTemp,
|
||||
#endif
|
||||
#if HAS_FAN
|
||||
FanSpeed,
|
||||
#endif
|
||||
PrintSpeed,
|
||||
|
||||
// Window ID
|
||||
Print_window,
|
||||
Popup_Window
|
||||
};
|
||||
|
||||
// Picture ID
|
||||
#define Start_Process 0
|
||||
#define Language_English 1
|
||||
#define Language_Chinese 2
|
||||
|
||||
// ICON ID
|
||||
#define ICON 0x09
|
||||
#define ICON_LOGO 0
|
||||
#define ICON_Print_0 1
|
||||
#define ICON_Print_1 2
|
||||
#define ICON_Prepare_0 3
|
||||
#define ICON_Prepare_1 4
|
||||
#define ICON_Control_0 5
|
||||
#define ICON_Control_1 6
|
||||
#define ICON_Leveling_0 7
|
||||
#define ICON_Leveling_1 8
|
||||
#define ICON_HotendTemp 9
|
||||
#define ICON_BedTemp 10
|
||||
#define ICON_Speed 11
|
||||
#define ICON_Zoffset 12
|
||||
#define ICON_Back 13
|
||||
#define ICON_File 14
|
||||
#define ICON_PrintTime 15
|
||||
#define ICON_RemainTime 16
|
||||
#define ICON_Setup_0 17
|
||||
#define ICON_Setup_1 18
|
||||
#define ICON_Pause_0 19
|
||||
#define ICON_Pause_1 20
|
||||
#define ICON_Continue_0 21
|
||||
#define ICON_Continue_1 22
|
||||
#define ICON_Stop_0 23
|
||||
#define ICON_Stop_1 24
|
||||
#define ICON_Bar 25
|
||||
#define ICON_More 26
|
||||
|
||||
#define ICON_Axis 27
|
||||
#define ICON_CloseMotor 28
|
||||
#define ICON_Homing 29
|
||||
#define ICON_SetHome 30
|
||||
#define ICON_PLAPreheat 31
|
||||
#define ICON_ABSPreheat 32
|
||||
#define ICON_Cool 33
|
||||
#define ICON_Language 34
|
||||
|
||||
#define ICON_MoveX 35
|
||||
#define ICON_MoveY 36
|
||||
#define ICON_MoveZ 37
|
||||
#define ICON_Extruder 38
|
||||
|
||||
#define ICON_Temperature 40
|
||||
#define ICON_Motion 41
|
||||
#define ICON_WriteEEPROM 42
|
||||
#define ICON_ReadEEPROM 43
|
||||
#define ICON_ResumeEEPROM 44
|
||||
#define ICON_Info 45
|
||||
|
||||
#define ICON_SetEndTemp 46
|
||||
#define ICON_SetBedTemp 47
|
||||
#define ICON_FanSpeed 48
|
||||
#define ICON_SetPLAPreheat 49
|
||||
#define ICON_SetABSPreheat 50
|
||||
|
||||
#define ICON_MaxSpeed 51
|
||||
#define ICON_MaxAccelerated 52
|
||||
#define ICON_MaxCorner 53
|
||||
#define ICON_Step 54
|
||||
#define ICON_PrintSize 55
|
||||
#define ICON_Version 56
|
||||
#define ICON_Contact 57
|
||||
#define ICON_StockConfiguraton 58
|
||||
#define ICON_MaxSpeedX 59
|
||||
#define ICON_MaxSpeedY 60
|
||||
#define ICON_MaxSpeedZ 61
|
||||
#define ICON_MaxSpeedE 62
|
||||
#define ICON_MaxAccX 63
|
||||
#define ICON_MaxAccY 64
|
||||
#define ICON_MaxAccZ 65
|
||||
#define ICON_MaxAccE 66
|
||||
#define ICON_MaxSpeedCornerX 67
|
||||
#define ICON_MaxSpeedCornerY 68
|
||||
#define ICON_MaxSpeedCornerZ 69
|
||||
#define ICON_MaxSpeedCornerE 70
|
||||
#define ICON_StepX 71
|
||||
#define ICON_StepY 72
|
||||
#define ICON_StepZ 73
|
||||
#define ICON_StepE 74
|
||||
#define ICON_Setspeed 75
|
||||
#define ICON_SetZOffset 76
|
||||
#define ICON_Rectangle 77
|
||||
#define ICON_BLTouch 78
|
||||
#define ICON_TempTooLow 79
|
||||
#define ICON_AutoLeveling 80
|
||||
#define ICON_TempTooHigh 81
|
||||
#define ICON_NoTips_C 82
|
||||
#define ICON_NoTips_E 83
|
||||
#define ICON_Continue_C 84
|
||||
#define ICON_Continue_E 85
|
||||
#define ICON_Cancel_C 86
|
||||
#define ICON_Cancel_E 87
|
||||
#define ICON_Confirm_C 88
|
||||
#define ICON_Confirm_E 89
|
||||
#define ICON_Info_0 90
|
||||
#define ICON_Info_1 91
|
||||
|
||||
/**
|
||||
* 3-.0：The font size, 0x00-0x09, corresponds to the font size below:
|
||||
* 0x00=6*12 0x01=8*16 0x02=10*20 0x03=12*24 0x04=14*28
|
||||
* 0x05=16*32 0x06=20*40 0x07=24*48 0x08=28*56 0x09=32*64
|
||||
*/
|
||||
#define font6x12 0x00
|
||||
#define font8x16 0x01
|
||||
#define font10x20 0x02
|
||||
#define font12x24 0x03
|
||||
#define font14x28 0x04
|
||||
#define font16x32 0x05
|
||||
#define font20x40 0x06
|
||||
#define font24x48 0x07
|
||||
#define font28x56 0x08
|
||||
#define font32x64 0x09
|
||||
|
||||
// Color
|
||||
#define White 0xFFFF
|
||||
#define Background_window 0x31E8 // Popup background color
|
||||
#define Background_blue 0x1125 // Dark blue background color
|
||||
#define Background_black 0x0841 // black background color
|
||||
#define Font_window 0xD6BA // Popup font background color
|
||||
#define Line_Color 0x3A6A // Split line color
|
||||
#define Rectangle_Color 0xEE2F // blue square cursor color
|
||||
#define Percent_Color 0xFE29 // percentage color
|
||||
#define BarFill_Color 0x10E4 // fill color of progress bar
|
||||
#define Select_Color 0x33BB // selected color
|
||||
|
||||
extern int checkkey, last_checkkey;
|
||||
extern float zprobe_zoffset;
|
||||
extern char print_filename[16];
|
||||
|
||||
extern millis_t dwin_heat_time;
|
||||
|
||||
typedef struct {
|
||||
TERN_(HAS_HOTEND, int16_t E_Temp = 0);
|
||||
TERN_(HAS_HEATED_BED, int16_t Bed_Temp = 0);
|
||||
TERN_(HAS_FAN, int16_t Fan_speed = 0);
|
||||
int16_t print_speed = 100;
|
||||
float Max_Feedspeed = 0;
|
||||
float Max_Acceleration = 0;
|
||||
float Max_Corner = 0;
|
||||
float Max_Step = 0;
|
||||
float Move_X_scale = 0;
|
||||
float Move_Y_scale = 0;
|
||||
float Move_Z_scale = 0;
|
||||
#if EXTRUDERS
|
||||
float Move_E_scale = 0;
|
||||
#endif
|
||||
float offset_value = 0;
|
||||
char show_mode = 0; // -1: Temperature control 0: Printing temperature
|
||||
} HMI_value_t;
|
||||
|
||||
typedef struct {
|
||||
bool language_chinese; // 0: EN, 1: CN
|
||||
bool pause_flag:1;
|
||||
bool print_finish:1;
|
||||
bool confirm_flag:1;
|
||||
bool select_flag:1;
|
||||
bool home_flag:1;
|
||||
bool heat_flag:1; // 0: heating done 1: during heating
|
||||
#if HAS_HOTEND
|
||||
bool ETempTooLow_flag:1;
|
||||
#endif
|
||||
#if HAS_LEVELING
|
||||
bool leveling_offset_flag:1;
|
||||
#endif
|
||||
#if HAS_FAN
|
||||
char feedspeed_flag;
|
||||
#endif
|
||||
char acc_flag;
|
||||
char corner_flag;
|
||||
char step_flag;
|
||||
} HMI_Flag;
|
||||
|
||||
extern HMI_value_t HMI_ValueStruct;
|
||||
extern HMI_Flag HMI_flag;
|
||||
|
||||
// Language
|
||||
void HMI_SetLanguage(void);
|
||||
void HMI_SetAndSaveLanguageWestern(void);
|
||||
void HMI_SetAndSaveLanguageChinese(void);
|
||||
|
||||
// Show ICO
|
||||
void ICON_Print(bool show);
|
||||
void ICON_Prepare(bool show);
|
||||
void ICON_Control(bool show);
|
||||
void ICON_Leveling(bool show);
|
||||
void ICON_StartInfo(bool show);
|
||||
|
||||
void ICON_Setting(bool show);
|
||||
void ICON_Pause(bool show);
|
||||
void ICON_Continue(bool show);
|
||||
void ICON_Stop(bool show);
|
||||
|
||||
// Popup window tips
|
||||
#if HAS_HOTEND
|
||||
void Popup_Window_Temperature(const bool toohigh);
|
||||
void Popup_Window_ETempTooLow(void);
|
||||
#endif
|
||||
|
||||
void Popup_Window_Resume(void);
|
||||
void Popup_Window_Home(void);
|
||||
void Popup_Window_Leveling(void);
|
||||
|
||||
void Goto_PrintProcess(void);
|
||||
void Goto_MainMenu(void);
|
||||
|
||||
// Variable control
|
||||
void HMI_Move_X(void);
|
||||
void HMI_Move_Y(void);
|
||||
void HMI_Move_Z(void);
|
||||
void HMI_Move_E(void);
|
||||
|
||||
void HMI_Zoffset(void);
|
||||
|
||||
TERN_(HAS_HOTEND, void HMI_ETemp(void));
|
||||
TERN_(HAS_HEATED_BED, void HMI_BedTemp(void));
|
||||
TERN_(HAS_FAN, void HMI_FanSpeed(void));
|
||||
|
||||
void HMI_PrintSpeed(void);
|
||||
|
||||
void HMI_MaxFeedspeedXYZE(void);
|
||||
void HMI_MaxAccelerationXYZE(void);
|
||||
void HMI_MaxCornerXYZE(void);
|
||||
void HMI_StepXYZE(void);
|
||||
|
||||
void update_variable(void);
|
||||
void show_plus_or_minus(uint8_t size, uint16_t bColor, uint8_t iNum, uint8_t fNum, uint16_t x, uint16_t y, long value);
|
||||
|
||||
// SD Card
|
||||
void HMI_SDCardInit(void);
|
||||
void HMI_SDCardUpdate(void);
|
||||
|
||||
// Main Process
|
||||
void Icon_print(bool value);
|
||||
void Icon_control(bool value);
|
||||
void Icon_temperature(bool value);
|
||||
void Icon_leveling(bool value);
|
||||
|
||||
// Other
|
||||
bool Pause_HeatStatus();
|
||||
void HMI_StartFrame(const bool with_update); // startup screen
|
||||
void HMI_MainMenu(void); // main process screen
|
||||
void HMI_SelectFile(void); // file page
|
||||
void HMI_Printing(void); // print page
|
||||
void HMI_Prepare(void); // prepare page
|
||||
void HMI_Control(void); // control page
|
||||
void HMI_Leveling(void); // Level the page
|
||||
void HMI_AxisMove(void); // Axis movement menu
|
||||
void HMI_Temperature(void); // Temperature menu
|
||||
void HMI_Motion(void); // Sports menu
|
||||
void HMI_Info(void); // Information menu
|
||||
void HMI_Tune(void); // Adjust the menu
|
||||
|
||||
#if HAS_HOTEND
|
||||
void HMI_PLAPreheatSetting(void); // PLA warm-up setting
|
||||
void HMI_ABSPreheatSetting(void); // ABS warm-up setting
|
||||
#endif
|
||||
|
||||
void HMI_MaxSpeed(void); // Maximum speed submenu
|
||||
void HMI_MaxAcceleration(void); // Maximum acceleration submenu
|
||||
void HMI_MaxCorner(void); // Maximum corner speed submenu
|
||||
void HMI_Step(void); // transmission ratio
|
||||
|
||||
void HMI_Init(void);
|
||||
void DWIN_Update(void);
|
||||
void EachMomentUpdate(void);
|
||||
void DWIN_HandleScreen(void);
|
||||
|
||||
void DWIN_CompletedHoming(void);
|
||||
void DWIN_CompletedLeveling(void);
|
||||
251
Marlin/src/lcd/dwin/e3v2/rotary_encoder.cpp
Normal file
251
Marlin/src/lcd/dwin/e3v2/rotary_encoder.cpp
Normal file
@ -0,0 +1,251 @@
|
||||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <https://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file rotary_encoder.cpp
|
||||
* @author LEO / Creality3D
|
||||
* @date 2019/07/06
|
||||
* @version 2.0.1
|
||||
* @brief 旋转编码器操作函数
|
||||
******************************************************************************
|
||||
**/
|
||||
|
||||
#include "../../../inc/MarlinConfigPre.h"
|
||||
|
||||
#if ENABLED(DWIN_CREALITY_LCD)
|
||||
|
||||
#include "rotary_encoder.h"
|
||||
|
||||
#include "../../../MarlinCore.h"
|
||||
#include "../../../HAL/shared/Delay.h"
|
||||
|
||||
#if HAS_BUZZER
|
||||
#include "../../../libs/buzzer.h"
|
||||
#endif
|
||||
|
||||
#include <stdlib.h>
|
||||
|
||||
ENCODER_Rate EncoderRate;
|
||||
|
||||
/*蜂鸣器响*/
|
||||
void Encoder_tick(void) {
|
||||
WRITE(BEEPER_PIN, 1);
|
||||
delay(10);
|
||||
WRITE(BEEPER_PIN, 0);
|
||||
}
|
||||
|
||||
/*编码器初始化 PB12:Encoder_A PB13:Encoder_B PB14:Encoder_C*/
|
||||
void Encoder_Configuration(void) {
|
||||
#if BUTTON_EXISTS(EN1)
|
||||
SET_INPUT_PULLUP(BTN_EN1);
|
||||
#endif
|
||||
#if BUTTON_EXISTS(EN2)
|
||||
SET_INPUT_PULLUP(BTN_EN2);
|
||||
#endif
|
||||
#if BUTTON_EXISTS(ENC)
|
||||
SET_INPUT_PULLUP(BTN_ENC);
|
||||
#endif
|
||||
#ifdef BEEPER_PIN
|
||||
SET_OUTPUT(BEEPER_PIN);
|
||||
#endif
|
||||
}
|
||||
|
||||
millis_t next_click_update_ms;
|
||||
/*接收数据解析 返回值:ENCODER_DIFF_NO,无状态; ENCODER_DIFF_CW,顺时针旋转; ENCODER_DIFF_CCW,逆时针旋转; ENCODER_DIFF_ENTER,按下*/
|
||||
ENCODER_DiffState Encoder_ReceiveAnalyze(void) {
|
||||
const millis_t now = millis();
|
||||
static unsigned char lastEncoderBits;
|
||||
unsigned char newbutton = 0;
|
||||
static signed char temp_diff = 0;
|
||||
|
||||
ENCODER_DiffState temp_diffState = ENCODER_DIFF_NO;
|
||||
if (BUTTON_PRESSED(EN1)) newbutton |= 0x01;
|
||||
if (BUTTON_PRESSED(EN2)) newbutton |= 0x02;
|
||||
if (BUTTON_PRESSED(ENC)) {
|
||||
if (ELAPSED(now, next_click_update_ms)) {
|
||||
next_click_update_ms = millis() + 300;
|
||||
Encoder_tick();
|
||||
#if PIN_EXISTS(LCD_LED)
|
||||
//LED_Action();
|
||||
#endif
|
||||
const bool was_waiting = wait_for_user;
|
||||
wait_for_user = false;
|
||||
return was_waiting ? ENCODER_DIFF_NO : ENCODER_DIFF_ENTER;
|
||||
}
|
||||
else return ENCODER_DIFF_NO;
|
||||
}
|
||||
if (newbutton != lastEncoderBits) {
|
||||
switch (newbutton) {
|
||||
case ENCODER_PHASE_0: {
|
||||
if (lastEncoderBits == ENCODER_PHASE_3) temp_diff++;
|
||||
else if (lastEncoderBits == ENCODER_PHASE_1) temp_diff--;
|
||||
}break;
|
||||
case ENCODER_PHASE_1: {
|
||||
if (lastEncoderBits == ENCODER_PHASE_0) temp_diff++;
|
||||
else if (lastEncoderBits == ENCODER_PHASE_2) temp_diff--;
|
||||
}break;
|
||||
case ENCODER_PHASE_2: {
|
||||
if (lastEncoderBits == ENCODER_PHASE_1) temp_diff++;
|
||||
else if (lastEncoderBits == ENCODER_PHASE_3) temp_diff--;
|
||||
}break;
|
||||
case ENCODER_PHASE_3: {
|
||||
if (lastEncoderBits == ENCODER_PHASE_2) temp_diff++;
|
||||
else if (lastEncoderBits == ENCODER_PHASE_0) temp_diff--;
|
||||
}break;
|
||||
}
|
||||
lastEncoderBits = newbutton;
|
||||
}
|
||||
|
||||
if (abs(temp_diff) >= ENCODER_PULSES_PER_STEP) {
|
||||
if (temp_diff > 0) temp_diffState = ENCODER_DIFF_CW;
|
||||
else temp_diffState = ENCODER_DIFF_CCW;
|
||||
|
||||
#if ENABLED(ENCODER_RATE_MULTIPLIER)
|
||||
|
||||
millis_t ms = millis();
|
||||
int32_t encoderMultiplier = 1;
|
||||
|
||||
// if must encoder rati multiplier
|
||||
if (EncoderRate.encoderRateEnabled) {
|
||||
const float abs_diff = ABS(temp_diff);
|
||||
const float encoderMovementSteps = abs_diff / (ENCODER_PULSES_PER_STEP);
|
||||
if (EncoderRate.lastEncoderTime) {
|
||||
// Note that the rate is always calculated between two passes through the
|
||||
// loop and that the abs of the temp_diff value is tracked.
|
||||
const float encoderStepRate = encoderMovementSteps / float(ms - EncoderRate.lastEncoderTime) * 1000;
|
||||
if (encoderStepRate >= ENCODER_100X_STEPS_PER_SEC) encoderMultiplier = 100;
|
||||
else if (encoderStepRate >= ENCODER_10X_STEPS_PER_SEC) encoderMultiplier = 10;
|
||||
else if (encoderStepRate >= ENCODER_5X_STEPS_PER_SEC) encoderMultiplier = 5;
|
||||
}
|
||||
EncoderRate.lastEncoderTime = ms;
|
||||
}
|
||||
#else
|
||||
constexpr int32_t encoderMultiplier = 1;
|
||||
#endif // ENCODER_RATE_MULTIPLIER
|
||||
|
||||
// EncoderRate.encoderMoveValue += (temp_diff * encoderMultiplier) / (ENCODER_PULSES_PER_STEP);
|
||||
EncoderRate.encoderMoveValue = (temp_diff * encoderMultiplier) / (ENCODER_PULSES_PER_STEP);
|
||||
if (EncoderRate.encoderMoveValue < 0) EncoderRate.encoderMoveValue = -EncoderRate.encoderMoveValue;
|
||||
|
||||
temp_diff = 0;
|
||||
}
|
||||
return temp_diffState;
|
||||
}
|
||||
|
||||
#if PIN_EXISTS(LCD_LED)
|
||||
|
||||
/*取低24位有效 24Bit: G7 G6 G5 G4 G3 G2 G1 G0 R7 R6 R5 R4 R3 R2 R1 R0 B7 B6 B5 B4 B3 B2 B1 B0*/
|
||||
unsigned int LED_DataArray[LED_NUM];
|
||||
|
||||
/*LED灯操作*/
|
||||
void LED_Action(void) {
|
||||
LED_Control(RGB_SCALE_WARM_WHITE,0x0F);
|
||||
delay(30);
|
||||
LED_Control(RGB_SCALE_WARM_WHITE,0x00);
|
||||
}
|
||||
|
||||
/*LED初始化*/
|
||||
void LED_Configuration(void) {
|
||||
SET_OUTPUT(LCD_LED_PIN);
|
||||
}
|
||||
|
||||
/*LED写数据*/
|
||||
void LED_WriteData(void) {
|
||||
unsigned char tempCounter_LED, tempCounter_Bit;
|
||||
for (tempCounter_LED = 0; tempCounter_LED < LED_NUM; tempCounter_LED++) {
|
||||
for (tempCounter_Bit = 0; tempCounter_Bit < 24; tempCounter_Bit++) {
|
||||
if (LED_DataArray[tempCounter_LED] & (0x800000 >> tempCounter_Bit)) {
|
||||
LED_DATA_HIGH;
|
||||
DELAY_NS(300);
|
||||
LED_DATA_LOW;
|
||||
DELAY_NS(200);
|
||||
}
|
||||
else {
|
||||
LED_DATA_HIGH;
|
||||
LED_DATA_LOW;
|
||||
DELAY_NS(200);
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
/*LED控制 RGB_Scale:RGB色彩配比 luminance:亮度(0~0xFF)*/
|
||||
void LED_Control(unsigned char RGB_Scale, unsigned char luminance) {
|
||||
unsigned char temp_Counter;
|
||||
for (temp_Counter = 0; temp_Counter < LED_NUM; temp_Counter++) {
|
||||
LED_DataArray[temp_Counter] = 0;
|
||||
switch(RGB_Scale) {
|
||||
case RGB_SCALE_R10_G7_B5: LED_DataArray[temp_Counter] = (luminance*10/10) << 8 | (luminance*7/10) << 16 | luminance*5/10; break;
|
||||
case RGB_SCALE_R10_G7_B4: LED_DataArray[temp_Counter] = (luminance*10/10) << 8 | (luminance*7/10) << 16 | luminance*4/10; break;
|
||||
case RGB_SCALE_R10_G8_B7: LED_DataArray[temp_Counter] = (luminance*10/10) << 8 | (luminance*8/10) << 16 | luminance*7/10; break;
|
||||
}
|
||||
}
|
||||
LED_WriteData();
|
||||
}
|
||||
|
||||
/*LED渐变控制 RGB_Scale:RGB色彩配比 luminance:亮度(0~0xFF) change_Time:渐变时间(ms)*/
|
||||
void LED_GraduallyControl(unsigned char RGB_Scale, unsigned char luminance, unsigned int change_Interval) {
|
||||
unsigned char temp_Counter;
|
||||
unsigned char LED_R_Data[LED_NUM], LED_G_Data[LED_NUM], LED_B_Data[LED_NUM];
|
||||
bool LED_R_Flag = 0, LED_G_Flag = 0, LED_B_Flag = 0;
|
||||
|
||||
for (temp_Counter = 0; temp_Counter < LED_NUM; temp_Counter++) {
|
||||
switch(RGB_Scale) {
|
||||
case RGB_SCALE_R10_G7_B5: {
|
||||
LED_R_Data[temp_Counter] = luminance*10/10;
|
||||
LED_G_Data[temp_Counter] = luminance*7/10;
|
||||
LED_B_Data[temp_Counter] = luminance*5/10;
|
||||
}break;
|
||||
case RGB_SCALE_R10_G7_B4: {
|
||||
LED_R_Data[temp_Counter] = luminance*10/10;
|
||||
LED_G_Data[temp_Counter] = luminance*7/10;
|
||||
LED_B_Data[temp_Counter] = luminance*4/10;
|
||||
}break;
|
||||
case RGB_SCALE_R10_G8_B7: {
|
||||
LED_R_Data[temp_Counter] = luminance*10/10;
|
||||
LED_G_Data[temp_Counter] = luminance*8/10;
|
||||
LED_B_Data[temp_Counter] = luminance*7/10;
|
||||
}break;
|
||||
}
|
||||
}
|
||||
for (temp_Counter = 0; temp_Counter < LED_NUM; temp_Counter++) {
|
||||
if ((unsigned char)(LED_DataArray[temp_Counter] >> 8) > LED_R_Data[temp_Counter]) LED_DataArray[temp_Counter] -= 0x000100;
|
||||
else if ((unsigned char)(LED_DataArray[temp_Counter] >> 8) < LED_R_Data[temp_Counter]) LED_DataArray[temp_Counter] += 0x000100;
|
||||
while (1) {
|
||||
else LED_R_Flag = 1;
|
||||
if ((unsigned char)(LED_DataArray[temp_Counter]>>16) > LED_G_Data[temp_Counter]) LED_DataArray[temp_Counter] -= 0x010000;
|
||||
else if ((unsigned char)(LED_DataArray[temp_Counter]>>16) < LED_G_Data[temp_Counter]) LED_DataArray[temp_Counter] += 0x010000;
|
||||
else LED_G_Flag = 1;
|
||||
if ((unsigned char)LED_DataArray[temp_Counter] > LED_B_Data[temp_Counter]) LED_DataArray[temp_Counter] -= 0x000001;
|
||||
else if ((unsigned char)LED_DataArray[temp_Counter] < LED_B_Data[temp_Counter]) LED_DataArray[temp_Counter] += 0x000001;
|
||||
else LED_B_Flag = 1;
|
||||
}
|
||||
LED_WriteData();
|
||||
if (LED_R_Flag && LED_G_Flag && LED_B_Flag) break;
|
||||
else delay(change_Interval);
|
||||
}
|
||||
}
|
||||
|
||||
#endif
|
||||
|
||||
#endif // DWIN_CREALITY_LCD
|
||||
105
Marlin/src/lcd/dwin/e3v2/rotary_encoder.h
Normal file
105
Marlin/src/lcd/dwin/e3v2/rotary_encoder.h
Normal file
@ -0,0 +1,105 @@
|
||||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <https://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file rotary_encoder.h
|
||||
* @author LEO / Creality3D
|
||||
* @date 2019/07/06
|
||||
* @version 2.0.1
|
||||
* @brief 旋转编码器操作函数
|
||||
******************************************************************************
|
||||
**/
|
||||
|
||||
#include "../../../inc/MarlinConfig.h"
|
||||
#include "../../../MarlinCore.h"
|
||||
|
||||
/*********************** Encoder Set ***********************/
|
||||
|
||||
#define ENCODER_PHASE_0 0
|
||||
#define ENCODER_PHASE_1 2
|
||||
#define ENCODER_PHASE_2 3
|
||||
#define ENCODER_PHASE_3 1
|
||||
|
||||
#define ENCODER_PULSES_PER_STEP 4
|
||||
|
||||
#define BUTTON_PRESSED(BN) !READ(BTN_## BN)
|
||||
|
||||
typedef struct {
|
||||
bool encoderRateEnabled = 0;
|
||||
int encoderMoveValue = 0;
|
||||
millis_t lastEncoderTime = 0;
|
||||
} ENCODER_Rate;
|
||||
|
||||
extern ENCODER_Rate EncoderRate;
|
||||
|
||||
typedef enum {
|
||||
ENCODER_DIFF_NO = 0,
|
||||
ENCODER_DIFF_CW = 1,
|
||||
ENCODER_DIFF_CCW = 2,
|
||||
ENCODER_DIFF_ENTER = 3
|
||||
} ENCODER_DiffState;
|
||||
|
||||
/*编码器初始化 PB12:Encoder_A PB13:Encoder_B PB14:Encoder_C*/
|
||||
void Encoder_Configuration(void);
|
||||
|
||||
/*接收数据解析 返回值:ENCODER_DIFF_NO,无状态; ENCODER_DIFF_CW,顺时针旋转; ENCODER_DIFF_CCW,逆时针旋转; ENCODER_DIFF_ENTER,按下*/
|
||||
ENCODER_DiffState Encoder_ReceiveAnalyze(void);
|
||||
|
||||
|
||||
/*********************** Encoder LED ***********************/
|
||||
|
||||
#if PIN_EXISTS(LCD_LED)
|
||||
|
||||
#define LED_NUM 4
|
||||
#define LED_DATA_HIGH WRITE(LCD_LED_PIN, 1)
|
||||
#define LED_DATA_LOW WRITE(LCD_LED_PIN, 0)
|
||||
|
||||
#define RGB_SCALE_R10_G7_B5 1
|
||||
#define RGB_SCALE_R10_G7_B4 2
|
||||
#define RGB_SCALE_R10_G8_B7 3
|
||||
#define RGB_SCALE_NEUTRAL_WHITE RGB_SCALE_R10_G7_B5 //正白
|
||||
#define RGB_SCALE_WARM_WHITE RGB_SCALE_R10_G7_B4 //暖白
|
||||
#define RGB_SCALE_COOL_WHITE RGB_SCALE_R10_G8_B7 //冷白
|
||||
|
||||
extern unsigned int LED_DataArray[LED_NUM];
|
||||
|
||||
/*状态LED初始化*/
|
||||
void STATE_LED_Configuration(void);
|
||||
|
||||
/*LED灯操作*/
|
||||
void LED_Action(void);
|
||||
|
||||
/*LED初始化*/
|
||||
void LED_Configuration(void);
|
||||
|
||||
/*LED写数据*/
|
||||
void LED_WriteData(void);
|
||||
|
||||
/*LED控制 RGB_Scale:RGB色彩配比 luminance:亮度(0~0xFF)*/
|
||||
void LED_Control(unsigned char RGB_Scale, unsigned char luminance);
|
||||
|
||||
/*LED渐变控制 RGB_Scale:RGB色彩配比 luminance:亮度(0~0xFF) change_Time:渐变时间(ms)*/
|
||||
void LED_GraduallyControl(unsigned char RGB_Scale, unsigned char luminance, unsigned int change_Interval);
|
||||
|
||||
#endif
|
||||
Reference in New Issue
Block a user