bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity

Mark axes not-homed with HOME_AFTER_DEACTIVATE (#18907)

Browse Source
This commit is contained in:
swissnorp 2020-08-27 23:05:53 +02:00 committed by GitHub
parent 462d3eeab1
commit a12ac5e175
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
20 changed files with 40 additions and 44 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

5
Marlin/src/feature/babystep.cpp
View File

@ -26,7 +26,8 @@
#include "babystep.h"
#include "../MarlinCore.h"
#include "../module/planner.h"
#include "../module/motion.h" // for axes_should_home()
#include "../module/planner.h" // for axis_steps_per_mm[]
#include "../module/stepper.h"
#if ENABLED(BABYSTEP_ALWAYS_AVAILABLE)
@ -54,7 +55,7 @@ void Babystep::add_mm(const AxisEnum axis, const float &mm) {
}
void Babystep::add_steps(const AxisEnum axis, const int16_t distance) {
if (DISABLED(BABYSTEP_WITHOUT_HOMING) && !TEST(axis_known_position, axis)) return;
if (DISABLED(BABYSTEP_WITHOUT_HOMING) && axes_should_home(_BV(axis))) return;
accum += distance; // Count up babysteps for the UI
steps[BS_AXIS_IND(axis)] += distance;

2
Marlin/src/feature/bedlevel/ubl/ubl_G29.cpp
View File

@ -321,7 +321,7 @@
// Check for commands that require the printer to be homed
if (may_move) {
planner.synchronize();
if (axes_need_homing()) gcode.home_all_axes();
if (axes_should_home()) gcode.home_all_axes();
TERN_(HAS_MULTI_HOTEND, if (active_extruder) tool_change(0));
}

2
Marlin/src/feature/pause.cpp
View File

@ -413,7 +413,7 @@ bool pause_print(const float &retract, const xyz_pos_t &park_point, const float
unscaled_e_move(retract, PAUSE_PARK_RETRACT_FEEDRATE);
// Park the nozzle by moving up by z_lift and then moving to (x_pos, y_pos)
if (!axes_need_homing())
if (!axes_should_home())
nozzle.park(0, park_point);
#if ENABLED(DUAL_X_CARRIAGE)

2
Marlin/src/gcode/bedlevel/G26.cpp
View File

@ -490,7 +490,7 @@ void GcodeSuite::G26() {
// Don't allow Mesh Validation without homing first,
// or if the parameter parsing did not go OK, abort
if (axis_unhomed_error()) return;
if (homing_needed_error()) return;
// Change the tool first, if specified
if (parser.seenval('T')) tool_change(parser.value_int());

2
Marlin/src/gcode/bedlevel/abl/G29.cpp
View File

@ -183,7 +183,7 @@ G29_TYPE GcodeSuite::G29() {
faux = ENABLED(DEBUG_LEVELING_FEATURE) && DISABLED(PROBE_MANUALLY) ? parser.boolval('C') : no_action;
// Don't allow auto-leveling without homing first
if (axis_unhomed_error()) G29_RETURN(false);
if (homing_needed_error()) G29_RETURN(false);
if (!no_action && planner.leveling_active && parser.boolval('O')) { // Auto-level only if needed
if (DEBUGGING(LEVELING)) DEBUG_ECHOLNPGM("> Auto-level not needed, skip");

6
Marlin/src/gcode/calibrate/G28.cpp
View File

@ -118,7 +118,7 @@
DEBUG_SECTION(log_G28, "home_z_safely", DEBUGGING(LEVELING));
// Disallow Z homing if X or Y homing is needed
if (axis_unhomed_error(_BV(X_AXIS) | _BV(Y_AXIS))) return;
if (homing_needed_error(_BV(X_AXIS) | _BV(Y_AXIS))) return;
sync_plan_position();
@ -299,8 +299,8 @@ void GcodeSuite::G28() {
#else // NOT DELTA
const bool homeZ = parser.seen('Z'),
needX = homeZ && TERN0(Z_SAFE_HOMING, axes_need_homing(_BV(X_AXIS))),
needY = homeZ && TERN0(Z_SAFE_HOMING, axes_need_homing(_BV(Y_AXIS))),
needX = homeZ && TERN0(Z_SAFE_HOMING, axes_should_home(_BV(X_AXIS))),
needY = homeZ && TERN0(Z_SAFE_HOMING, axes_should_home(_BV(Y_AXIS))),
homeX = needX || parser.seen('X'), homeY = needY || parser.seen('Y'),
home_all = homeX == homeY && homeX == homeZ, // All or None
doX = home_all || homeX, doY = home_all || homeY, doZ = home_all || homeZ;

2
Marlin/src/gcode/calibrate/G425.cpp
View File

@ -584,7 +584,7 @@ void GcodeSuite::G425() {
TEMPORARY_SOFT_ENDSTOP_STATE(false);
TEMPORARY_BED_LEVELING_STATE(false);
if (axis_unhomed_error()) return;
if (homing_needed_error()) return;
measurements_t m;

2
Marlin/src/gcode/calibrate/M48.cpp
View File

@ -55,7 +55,7 @@ extern const char SP_Y_STR[];
void GcodeSuite::M48() {
if (axis_unhomed_error()) return;
if (homing_needed_error()) return;
const int8_t verbose_level = parser.byteval('V', 1);
if (!WITHIN(verbose_level, 0, 4)) {

2
Marlin/src/gcode/feature/camera/M240.cpp
View File

@ -126,7 +126,7 @@ void GcodeSuite::M240() {
#ifdef PHOTO_POSITION
if (axis_unhomed_error()) return;
if (homing_needed_error()) return;
const xyz_pos_t old_pos = {
current_position.x + parser.linearval('A'),

2
Marlin/src/gcode/feature/clean/G12.cpp
View File

@ -45,7 +45,7 @@
*/
void GcodeSuite::G12() {
// Don't allow nozzle cleaning without homing first
if (axis_unhomed_error()) return;
if (homing_needed_error()) return;
#ifdef WIPE_SEQUENCE_COMMANDS
if (!parser.seen_any()) {

2
Marlin/src/gcode/feature/pause/G27.cpp
View File

@ -34,7 +34,7 @@
*/
void GcodeSuite::G27() {
// Don't allow nozzle parking without homing first
if (axis_unhomed_error()) return;
if (homing_needed_error()) return;
nozzle.park(parser.ushortval('P'));
}

4
Marlin/src/gcode/feature/pause/M701_M702.cpp
View File

@ -61,7 +61,7 @@ void GcodeSuite::M701() {
#if ENABLED(NO_MOTION_BEFORE_HOMING)
// Don't raise Z if the machine isn't homed
if (axes_need_homing()) park_point.z = 0;
if (axes_should_home()) park_point.z = 0;
#endif
#if ENABLED(MIXING_EXTRUDER)
@ -149,7 +149,7 @@ void GcodeSuite::M702() {
#if ENABLED(NO_MOTION_BEFORE_HOMING)
// Don't raise Z if the machine isn't homed
if (axes_need_homing()) park_point.z = 0;
if (axes_should_home()) park_point.z = 0;
#endif
#if ENABLED(MIXING_EXTRUDER)

2
Marlin/src/gcode/geometry/M206_M428.cpp
View File

@ -61,7 +61,7 @@ void GcodeSuite::M206() {
* Use M206 to set these values directly.
*/
void GcodeSuite::M428() {
if (axis_unhomed_error()) return;
if (homing_needed_error()) return;
xyz_float_t diff;
LOOP_XYZ(i) {

2
Marlin/src/gcode/motion/G0_G1.cpp
View File

@ -52,7 +52,7 @@ void GcodeSuite::G0_G1(
if (IsRunning()
#if ENABLED(NO_MOTION_BEFORE_HOMING)
&& !axis_unhomed_error(
&& !homing_needed_error(
(parser.seen('X') ? _BV(X_AXIS) : 0)
| (parser.seen('Y') ? _BV(Y_AXIS) : 0)
| (parser.seen('Z') ? _BV(Z_AXIS) : 0) )

2
Marlin/src/lcd/menu/menu_configuration.cpp
View File

@ -181,7 +181,7 @@ void menu_advanced_settings();
#if ENABLED(DUAL_X_CARRIAGE)
void menu_idex() {
const bool need_g28 = !(TEST(axis_known_position, Y_AXIS) && TEST(axis_known_position, Z_AXIS));
const bool need_g28 = axes_should_home(_BV(Y_AXIS)|_BV(Z_AXIS));
START_MENU();
BACK_ITEM(MSG_CONFIGURATION);

15
Marlin/src/module/motion.cpp
View File

@ -1097,17 +1097,16 @@ void prepare_line_to_destination() {
current_position = destination;
}
uint8_t axes_need_homing(uint8_t axis_bits/*=0x07*/) {
#define HOMED_FLAGS TERN(HOME_AFTER_DEACTIVATE, axis_known_position, axis_homed)
// Clear test bits that are homed
if (TEST(axis_bits, X_AXIS) && TEST(HOMED_FLAGS, X_AXIS)) CBI(axis_bits, X_AXIS);
if (TEST(axis_bits, Y_AXIS) && TEST(HOMED_FLAGS, Y_AXIS)) CBI(axis_bits, Y_AXIS);
if (TEST(axis_bits, Z_AXIS) && TEST(HOMED_FLAGS, Z_AXIS)) CBI(axis_bits, Z_AXIS);
uint8_t axes_should_home(uint8_t axis_bits/*=0x07*/) {
// Clear test bits that are trusted
if (TEST(axis_bits, X_AXIS) && TEST(axis_homed, X_AXIS)) CBI(axis_bits, X_AXIS);
if (TEST(axis_bits, Y_AXIS) && TEST(axis_homed, Y_AXIS)) CBI(axis_bits, Y_AXIS);
if (TEST(axis_bits, Z_AXIS) && TEST(axis_homed, Z_AXIS)) CBI(axis_bits, Z_AXIS);
return axis_bits;
}
bool axis_unhomed_error(uint8_t axis_bits/*=0x07*/) {
if ((axis_bits = axes_need_homing(axis_bits))) {
bool homing_needed_error(uint8_t axis_bits/*=0x07*/) {
if ((axis_bits = axes_should_home(axis_bits))) {
PGM_P home_first = GET_TEXT(MSG_HOME_FIRST);
char msg[strlen_P(home_first)+1];
sprintf_P(msg, home_first,

19
Marlin/src/module/motion.h
View File

@ -40,8 +40,7 @@ constexpr uint8_t xyz_bits = _BV(X_AXIS) | _BV(Y_AXIS) | _BV(Z_AXIS);
FORCE_INLINE bool no_axes_homed() { return !axis_homed; }
FORCE_INLINE bool all_axes_homed() { return (axis_homed & xyz_bits) == xyz_bits; }
FORCE_INLINE bool all_axes_known() { return (axis_known_position & xyz_bits) == xyz_bits; }
FORCE_INLINE void set_all_unhomed() { axis_homed = 0; }
FORCE_INLINE void set_all_unknown() { axis_known_position = 0; }
FORCE_INLINE void set_all_unhomed() { axis_homed = axis_known_position = 0; }
FORCE_INLINE bool homing_needed() {
return !TERN(HOME_AFTER_DEACTIVATE, all_axes_known, all_axes_homed)();
@ -239,22 +238,18 @@ void do_z_clearance(const float &zclear, const bool z_known=true, const bool rai
//
// Homing
//
uint8_t axes_need_homing(uint8_t axis_bits=0x07);
bool axis_unhomed_error(uint8_t axis_bits=0x07);
void homeaxis(const AxisEnum axis);
void set_axis_is_at_home(const AxisEnum axis);
void set_axis_never_homed(const AxisEnum axis);
uint8_t axes_should_home(uint8_t axis_bits=0x07);
bool homing_needed_error(uint8_t axis_bits=0x07);
#if ENABLED(NO_MOTION_BEFORE_HOMING)
#define MOTION_CONDITIONS (IsRunning() && !axis_unhomed_error())
#define MOTION_CONDITIONS (IsRunning() && !homing_needed_error())
#else
#define MOTION_CONDITIONS IsRunning()
#endif
void set_axis_is_at_home(const AxisEnum axis);
void set_axis_never_homed(const AxisEnum axis);
void homeaxis(const AxisEnum axis);
/**
* Workspace offsets
*/

2
Marlin/src/module/probe.cpp
View File

@ -359,7 +359,7 @@ bool Probe::set_deployed(const bool deploy) {
do_z_raise(_MAX(Z_CLEARANCE_BETWEEN_PROBES, Z_CLEARANCE_DEPLOY_PROBE));
#if EITHER(Z_PROBE_SLED, Z_PROBE_ALLEN_KEY)
if (axis_unhomed_error(TERN_(Z_PROBE_SLED, _BV(X_AXIS)))) {
if (homing_needed_error(TERN_(Z_PROBE_SLED, _BV(X_AXIS)))) {
SERIAL_ERROR_MSG(STR_STOP_UNHOMED);
stop();
return true;

7
Marlin/src/module/stepper/indirection.h
View File

@ -840,12 +840,13 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset
//
// Axis steppers enable / disable macros
//
#define FORGET_AXIS(A) TERN(HOME_AFTER_DEACTIVATE, set_axis_never_homed(A), CBI(axis_known_position, A))
#define ENABLE_AXIS_X() do{ ENABLE_STEPPER_X(); ENABLE_STEPPER_X2(); }while(0)
#define DISABLE_AXIS_X() do{ DISABLE_STEPPER_X(); DISABLE_STEPPER_X2(); CBI(axis_known_position, X_AXIS); }while(0)
#define DISABLE_AXIS_X() do{ DISABLE_STEPPER_X(); DISABLE_STEPPER_X2(); FORGET_AXIS(X_AXIS); }while(0)
#define ENABLE_AXIS_Y() do{ ENABLE_STEPPER_Y(); ENABLE_STEPPER_Y2(); }while(0)
#define DISABLE_AXIS_Y() do{ DISABLE_STEPPER_Y(); DISABLE_STEPPER_Y2(); CBI(axis_known_position, Y_AXIS); }while(0)
#define DISABLE_AXIS_Y() do{ DISABLE_STEPPER_Y(); DISABLE_STEPPER_Y2(); FORGET_AXIS(Y_AXIS); }while(0)
#define ENABLE_AXIS_Z() do{ ENABLE_STEPPER_Z(); ENABLE_STEPPER_Z2(); ENABLE_STEPPER_Z3(); ENABLE_STEPPER_Z4(); }while(0)
@ -854,7 +855,7 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset
#else
#define Z_RESET()
#endif
#define DISABLE_AXIS_Z() do{ DISABLE_STEPPER_Z(); DISABLE_STEPPER_Z2(); DISABLE_STEPPER_Z3(); DISABLE_STEPPER_Z4(); CBI(axis_known_position, Z_AXIS); Z_RESET(); }while(0)
#define DISABLE_AXIS_Z() do{ DISABLE_STEPPER_Z(); DISABLE_STEPPER_Z2(); DISABLE_STEPPER_Z3(); DISABLE_STEPPER_Z4(); FORGET_AXIS(Z_AXIS); Z_RESET(); }while(0)
//
// Extruder steppers enable / disable macros

2
Marlin/src/module/tool_change.cpp
View File

@ -174,7 +174,7 @@ inline void fast_line_to_current(const AxisEnum fr_axis) { _line_to_current(fr_a
grabpos = mpe_settings.parking_xpos[new_tool] + (new_tool ? mpe_settings.grab_distance : -mpe_settings.grab_distance),
offsetcompensation = TERN0(HAS_HOTEND_OFFSET, hotend_offset[active_extruder].x * mpe_settings.compensation_factor);
if (axis_unhomed_error(_BV(X_AXIS))) return;
if (homing_needed_error(_BV(X_AXIS))) return;
/**
* Z Lift and Nozzle Offset shift ar defined in caller method to work equal with any Multi Hotend realization