bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity

G0 feedrate may be fixed or variable (#12172)

Browse Source
This commit is contained in:
TheSFReader
2018-10-25 17:35:16 +02:00
committed by Scott Lahteine
parent 53c535a0c1
commit a07ac6312f
61 changed files with 319 additions and 199 deletions
Download Patch File Download Diff File Expand all files Collapse all files

8
Marlin/src/config/default/Configuration_adv.h
View File

@ -1614,9 +1614,11 @@
*/
//#define PAREN_COMMENTS // Support for parentheses-delimited comments
//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
//#define G0_FEEDRATE // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
#if ENABLED(G0_FEEDRATE)
#define DEFAULT_G0_FEEDRATE 3000 // (mm/m)
// Enable and set a (default) feedrate for all G0 moves
//#define G0_FEEDRATE 3000 // (mm/m)
#ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif
/**

8
Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h
View File

@ -1613,9 +1613,11 @@
*/
//#define PAREN_COMMENTS // Support for parentheses-delimited comments
//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
//#define G0_FEEDRATE // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
#if ENABLED(G0_FEEDRATE)
#define DEFAULT_G0_FEEDRATE 3000 // (mm/m)
// Enable and set a (default) feedrate for all G0 moves
//#define G0_FEEDRATE 3000 // (mm/m)
#ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif
/**

8
Marlin/src/config/examples/Anet/A2/Configuration_adv.h
View File

@ -1613,9 +1613,11 @@
*/
//#define PAREN_COMMENTS // Support for parentheses-delimited comments
//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
//#define G0_FEEDRATE // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
#if ENABLED(G0_FEEDRATE)
#define DEFAULT_G0_FEEDRATE 3000 // (mm/m)
// Enable and set a (default) feedrate for all G0 moves
//#define G0_FEEDRATE 3000 // (mm/m)
#ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif
/**

8
Marlin/src/config/examples/Anet/A2plus/Configuration_adv.h
View File

@ -1613,9 +1613,11 @@
*/
//#define PAREN_COMMENTS // Support for parentheses-delimited comments
//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
//#define G0_FEEDRATE // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
#if ENABLED(G0_FEEDRATE)
#define DEFAULT_G0_FEEDRATE 3000 // (mm/m)
// Enable and set a (default) feedrate for all G0 moves
//#define G0_FEEDRATE 3000 // (mm/m)
#ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif
/**

8
Marlin/src/config/examples/Anet/A6/Configuration_adv.h
View File

@ -1613,9 +1613,11 @@
*/
//#define PAREN_COMMENTS // Support for parentheses-delimited comments
//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
//#define G0_FEEDRATE // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
#if ENABLED(G0_FEEDRATE)
#define DEFAULT_G0_FEEDRATE 3000 // (mm/m)
// Enable and set a (default) feedrate for all G0 moves
//#define G0_FEEDRATE 3000 // (mm/m)
#ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif
/**

8
Marlin/src/config/examples/Anet/A8/Configuration_adv.h
View File

@ -1613,9 +1613,11 @@
*/
//#define PAREN_COMMENTS // Support for parentheses-delimited comments
//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
//#define G0_FEEDRATE // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
#if ENABLED(G0_FEEDRATE)
#define DEFAULT_G0_FEEDRATE 3000 // (mm/m)
// Enable and set a (default) feedrate for all G0 moves
//#define G0_FEEDRATE 3000 // (mm/m)
#ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif
/**

8
Marlin/src/config/examples/ArmEd/Configuration_adv.h
View File

@ -1619,9 +1619,11 @@
*/
//#define PAREN_COMMENTS // Support for parentheses-delimited comments
//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
//#define G0_FEEDRATE // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
#if ENABLED(G0_FEEDRATE)
#define DEFAULT_G0_FEEDRATE 3000 // (mm/m)
// Enable and set a (default) feedrate for all G0 moves
//#define G0_FEEDRATE 3000 // (mm/m)
#ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif
/**

8
Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h
View File

@ -1613,9 +1613,11 @@
*/
//#define PAREN_COMMENTS // Support for parentheses-delimited comments
//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
//#define G0_FEEDRATE // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
#if ENABLED(G0_FEEDRATE)
#define DEFAULT_G0_FEEDRATE 3000 // (mm/m)
// Enable and set a (default) feedrate for all G0 moves
//#define G0_FEEDRATE 3000 // (mm/m)
#ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif
/**

8
Marlin/src/config/examples/BIBO/TouchX/default/Configuration_adv.h
View File

@ -1613,9 +1613,11 @@
*/
//#define PAREN_COMMENTS // Support for parentheses-delimited comments
//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
//#define G0_FEEDRATE // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
#if ENABLED(G0_FEEDRATE)
#define DEFAULT_G0_FEEDRATE 3000 // (mm/m)
// Enable and set a (default) feedrate for all G0 moves
//#define G0_FEEDRATE 3000 // (mm/m)
#ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif
/**

8
Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h
View File

@ -1613,9 +1613,11 @@
*/
//#define PAREN_COMMENTS // Support for parentheses-delimited comments
//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
//#define G0_FEEDRATE // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
#if ENABLED(G0_FEEDRATE)
#define DEFAULT_G0_FEEDRATE 3000 // (mm/m)
// Enable and set a (default) feedrate for all G0 moves
//#define G0_FEEDRATE 3000 // (mm/m)
#ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif
/**

9
Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h
View File

@ -1621,11 +1621,12 @@
*/
//#define PAREN_COMMENTS // Support for parentheses-delimited comments
//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
//#define G0_FEEDRATE // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
#if ENABLED(G0_FEEDRATE)
#define DEFAULT_G0_FEEDRATE 3000 // (mm/m)
#endif
// Enable and set a (default) feedrate for all G0 moves
//#define G0_FEEDRATE 3000 // (mm/m)
#ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif
/**
* User-defined menu items that execute custom GCode
*/

8
Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h
View File

@ -1613,9 +1613,11 @@
*/
//#define PAREN_COMMENTS // Support for parentheses-delimited comments
//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
//#define G0_FEEDRATE // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
#if ENABLED(G0_FEEDRATE)
#define DEFAULT_G0_FEEDRATE 3000 // (mm/m)
// Enable and set a (default) feedrate for all G0 moves
//#define G0_FEEDRATE 3000 // (mm/m)
#ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif
/**

8
Marlin/src/config/examples/Cartesio/Configuration_adv.h
View File

@ -1613,9 +1613,11 @@
*/
//#define PAREN_COMMENTS // Support for parentheses-delimited comments
//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
//#define G0_FEEDRATE // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
#if ENABLED(G0_FEEDRATE)
#define DEFAULT_G0_FEEDRATE 3000 // (mm/m)
// Enable and set a (default) feedrate for all G0 moves
//#define G0_FEEDRATE 3000 // (mm/m)
#ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif
/**

8
Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h
View File

@ -1616,9 +1616,11 @@
*/
//#define PAREN_COMMENTS // Support for parentheses-delimited comments
//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
//#define G0_FEEDRATE // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
#if ENABLED(G0_FEEDRATE)
#define DEFAULT_G0_FEEDRATE 3000 // (mm/m)
// Enable and set a (default) feedrate for all G0 moves
//#define G0_FEEDRATE 3000 // (mm/m)
#ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif
/**

8
Marlin/src/config/examples/Creality/CR-10S/Configuration_adv.h
View File

@ -1613,9 +1613,11 @@
*/
//#define PAREN_COMMENTS // Support for parentheses-delimited comments
//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
//#define G0_FEEDRATE // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
#if ENABLED(G0_FEEDRATE)
#define DEFAULT_G0_FEEDRATE 3000 // (mm/m)
// Enable and set a (default) feedrate for all G0 moves
//#define G0_FEEDRATE 3000 // (mm/m)
#ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif
/**

8
Marlin/src/config/examples/Creality/CR-10mini/Configuration_adv.h
View File

@ -1613,9 +1613,11 @@
*/
//#define PAREN_COMMENTS // Support for parentheses-delimited comments
//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
//#define G0_FEEDRATE // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
#if ENABLED(G0_FEEDRATE)
#define DEFAULT_G0_FEEDRATE 3000 // (mm/m)
// Enable and set a (default) feedrate for all G0 moves
//#define G0_FEEDRATE 3000 // (mm/m)
#ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif
/**

8
Marlin/src/config/examples/Creality/CR-8/Configuration_adv.h
View File

@ -1613,9 +1613,11 @@
*/
//#define PAREN_COMMENTS // Support for parentheses-delimited comments
//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
//#define G0_FEEDRATE // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
#if ENABLED(G0_FEEDRATE)
#define DEFAULT_G0_FEEDRATE 3000 // (mm/m)
// Enable and set a (default) feedrate for all G0 moves
//#define G0_FEEDRATE 3000 // (mm/m)
#ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif
/**

8
Marlin/src/config/examples/Creality/Ender-2/Configuration_adv.h
View File

@ -1613,9 +1613,11 @@
*/
//#define PAREN_COMMENTS // Support for parentheses-delimited comments
//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
//#define G0_FEEDRATE // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
#if ENABLED(G0_FEEDRATE)
#define DEFAULT_G0_FEEDRATE 3000 // (mm/m)
// Enable and set a (default) feedrate for all G0 moves
//#define G0_FEEDRATE 3000 // (mm/m)
#ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif
/**

8
Marlin/src/config/examples/Creality/Ender-3/Configuration_adv.h
View File

@ -1613,9 +1613,11 @@
*/
//#define PAREN_COMMENTS // Support for parentheses-delimited comments
//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
//#define G0_FEEDRATE // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
#if ENABLED(G0_FEEDRATE)
#define DEFAULT_G0_FEEDRATE 3000 // (mm/m)
// Enable and set a (default) feedrate for all G0 moves
//#define G0_FEEDRATE 3000 // (mm/m)
#ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif
/**

8
Marlin/src/config/examples/Creality/Ender-4/Configuration_adv.h
View File

@ -1613,9 +1613,11 @@
*/
//#define PAREN_COMMENTS // Support for parentheses-delimited comments
//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
//#define G0_FEEDRATE // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
#if ENABLED(G0_FEEDRATE)
#define DEFAULT_G0_FEEDRATE 3000 // (mm/m)
// Enable and set a (default) feedrate for all G0 moves
//#define G0_FEEDRATE 3000 // (mm/m)
#ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif
/**

8
Marlin/src/config/examples/Einstart-S/Configuration_adv.h
View File

@ -1613,9 +1613,11 @@
*/
//#define PAREN_COMMENTS // Support for parentheses-delimited comments
//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
//#define G0_FEEDRATE // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
#if ENABLED(G0_FEEDRATE)
#define DEFAULT_G0_FEEDRATE 3000 // (mm/m)
// Enable and set a (default) feedrate for all G0 moves
//#define G0_FEEDRATE 3000 // (mm/m)
#ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif
/**

8
Marlin/src/config/examples/Felix/Configuration_adv.h
View File

@ -1613,9 +1613,11 @@
*/
//#define PAREN_COMMENTS // Support for parentheses-delimited comments
//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
//#define G0_FEEDRATE // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
#if ENABLED(G0_FEEDRATE)
#define DEFAULT_G0_FEEDRATE 3000 // (mm/m)
// Enable and set a (default) feedrate for all G0 moves
//#define G0_FEEDRATE 3000 // (mm/m)
#ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif
/**

8
Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h
View File

@ -1613,9 +1613,11 @@
*/
//#define PAREN_COMMENTS // Support for parentheses-delimited comments
//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
//#define G0_FEEDRATE // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
#if ENABLED(G0_FEEDRATE)
#define DEFAULT_G0_FEEDRATE 3000 // (mm/m)
// Enable and set a (default) feedrate for all G0 moves
//#define G0_FEEDRATE 3000 // (mm/m)
#ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif
/**

8
Marlin/src/config/examples/Formbot/Raptor/Configuration_adv.h
View File

@ -1615,9 +1615,11 @@
*/
//#define PAREN_COMMENTS // Support for parentheses-delimited comments
//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
//#define G0_FEEDRATE // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
#if ENABLED(G0_FEEDRATE)
#define DEFAULT_G0_FEEDRATE 3000 // (mm/m)
// Enable and set a (default) feedrate for all G0 moves
//#define G0_FEEDRATE 3000 // (mm/m)
#ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif
/**

8
Marlin/src/config/examples/Formbot/T_Rex_2+/Configuration_adv.h
View File

@ -1617,9 +1617,11 @@
*/
//#define PAREN_COMMENTS // Support for parentheses-delimited comments
//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
//#define G0_FEEDRATE // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
#if ENABLED(G0_FEEDRATE)
#define DEFAULT_G0_FEEDRATE 3000 // (mm/m)
// Enable and set a (default) feedrate for all G0 moves
//#define G0_FEEDRATE 3000 // (mm/m)
#ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif
/**

8
Marlin/src/config/examples/Formbot/T_Rex_3/Configuration_adv.h
View File

@ -1618,9 +1618,11 @@
*/
//#define PAREN_COMMENTS // Support for parentheses-delimited comments
//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
//#define G0_FEEDRATE // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
#if ENABLED(G0_FEEDRATE)
#define DEFAULT_G0_FEEDRATE 3000 // (mm/m)
// Enable and set a (default) feedrate for all G0 moves
//#define G0_FEEDRATE 3000 // (mm/m)
#ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif
/**

8
Marlin/src/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h
View File

@ -1613,9 +1613,11 @@
*/
//#define PAREN_COMMENTS // Support for parentheses-delimited comments
//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
//#define G0_FEEDRATE // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
#if ENABLED(G0_FEEDRATE)
#define DEFAULT_G0_FEEDRATE 3000 // (mm/m)
// Enable and set a (default) feedrate for all G0 moves
//#define G0_FEEDRATE 3000 // (mm/m)
#ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif
/**

8
Marlin/src/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h
View File

@ -1613,9 +1613,11 @@
*/
//#define PAREN_COMMENTS // Support for parentheses-delimited comments
//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
//#define G0_FEEDRATE // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
#if ENABLED(G0_FEEDRATE)
#define DEFAULT_G0_FEEDRATE 3000 // (mm/m)
// Enable and set a (default) feedrate for all G0 moves
//#define G0_FEEDRATE 3000 // (mm/m)
#ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif
/**

8
Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h
View File

@ -1613,9 +1613,11 @@
*/
//#define PAREN_COMMENTS // Support for parentheses-delimited comments
//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
//#define G0_FEEDRATE // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
#if ENABLED(G0_FEEDRATE)
#define DEFAULT_G0_FEEDRATE 3000 // (mm/m)
// Enable and set a (default) feedrate for all G0 moves
//#define G0_FEEDRATE 3000 // (mm/m)
#ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif
/**

8
Marlin/src/config/examples/JGAurora/A5/Configuration_adv.h
View File

@ -1613,9 +1613,11 @@
*/
//#define PAREN_COMMENTS // Support for parentheses-delimited comments
//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
//#define G0_FEEDRATE // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
#if ENABLED(G0_FEEDRATE)
#define DEFAULT_G0_FEEDRATE 3000 // (mm/m)
// Enable and set a (default) feedrate for all G0 moves
//#define G0_FEEDRATE 3000 // (mm/m)
#ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif
/**

8
Marlin/src/config/examples/MakerParts/Configuration_adv.h
View File

@ -1613,9 +1613,11 @@
*/
//#define PAREN_COMMENTS // Support for parentheses-delimited comments
//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
//#define G0_FEEDRATE // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
#if ENABLED(G0_FEEDRATE)
#define DEFAULT_G0_FEEDRATE 3000 // (mm/m)
// Enable and set a (default) feedrate for all G0 moves
//#define G0_FEEDRATE 3000 // (mm/m)
#ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif
/**

8
Marlin/src/config/examples/Malyan/M150/Configuration_adv.h
View File

@ -1613,9 +1613,11 @@
*/
//#define PAREN_COMMENTS // Support for parentheses-delimited comments
//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
//#define G0_FEEDRATE // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
#if ENABLED(G0_FEEDRATE)
#define DEFAULT_G0_FEEDRATE 3000 // (mm/m)
// Enable and set a (default) feedrate for all G0 moves
//#define G0_FEEDRATE 3000 // (mm/m)
#ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif
/**

8
Marlin/src/config/examples/Malyan/M200/Configuration_adv.h
View File

@ -1613,9 +1613,11 @@
*/
//#define PAREN_COMMENTS // Support for parentheses-delimited comments
//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
//#define G0_FEEDRATE // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
#if ENABLED(G0_FEEDRATE)
#define DEFAULT_G0_FEEDRATE 3000 // (mm/m)
// Enable and set a (default) feedrate for all G0 moves
//#define G0_FEEDRATE 3000 // (mm/m)
#ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif
/**

8
Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h
View File

@ -1613,9 +1613,11 @@
*/
//#define PAREN_COMMENTS // Support for parentheses-delimited comments
//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
//#define G0_FEEDRATE // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
#if ENABLED(G0_FEEDRATE)
#define DEFAULT_G0_FEEDRATE 3000 // (mm/m)
// Enable and set a (default) feedrate for all G0 moves
//#define G0_FEEDRATE 3000 // (mm/m)
#ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif
/**

8
Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h
View File

@ -1621,9 +1621,11 @@
*/
//#define PAREN_COMMENTS // Support for parentheses-delimited comments
//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
//#define G0_FEEDRATE // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
#if ENABLED(G0_FEEDRATE)
#define DEFAULT_G0_FEEDRATE 3000 // (mm/m)
// Enable and set a (default) feedrate for all G0 moves
//#define G0_FEEDRATE 3000 // (mm/m)
#ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif
/**

8
Marlin/src/config/examples/RigidBot/Configuration_adv.h
View File

@ -1613,9 +1613,11 @@
*/
//#define PAREN_COMMENTS // Support for parentheses-delimited comments
//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
//#define G0_FEEDRATE // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
#if ENABLED(G0_FEEDRATE)
#define DEFAULT_G0_FEEDRATE 3000 // (mm/m)
// Enable and set a (default) feedrate for all G0 moves
//#define G0_FEEDRATE 3000 // (mm/m)
#ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif
/**

8
Marlin/src/config/examples/SCARA/Configuration_adv.h
View File

@ -1613,9 +1613,11 @@
*/
//#define PAREN_COMMENTS // Support for parentheses-delimited comments
//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
//#define G0_FEEDRATE // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
#if ENABLED(G0_FEEDRATE)
#define DEFAULT_G0_FEEDRATE 3000 // (mm/m)
// Enable and set a (default) feedrate for all G0 moves
//#define G0_FEEDRATE 3000 // (mm/m)
#ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif
/**

8
Marlin/src/config/examples/Sanguinololu/Configuration_adv.h
View File

@ -1613,9 +1613,11 @@
*/
//#define PAREN_COMMENTS // Support for parentheses-delimited comments
//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
//#define G0_FEEDRATE // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
#if ENABLED(G0_FEEDRATE)
#define DEFAULT_G0_FEEDRATE 3000 // (mm/m)
// Enable and set a (default) feedrate for all G0 moves
//#define G0_FEEDRATE 3000 // (mm/m)
#ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif
/**

8
Marlin/src/config/examples/TheBorg/Configuration_adv.h
View File

@ -1613,9 +1613,11 @@
*/
//#define PAREN_COMMENTS // Support for parentheses-delimited comments
//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
//#define G0_FEEDRATE // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
#if ENABLED(G0_FEEDRATE)
#define DEFAULT_G0_FEEDRATE 3000 // (mm/m)
// Enable and set a (default) feedrate for all G0 moves
//#define G0_FEEDRATE 3000 // (mm/m)
#ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif
/**

8
Marlin/src/config/examples/TinyBoy2/Configuration_adv.h
View File

@ -1613,9 +1613,11 @@
*/
//#define PAREN_COMMENTS // Support for parentheses-delimited comments
//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
//#define G0_FEEDRATE // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
#if ENABLED(G0_FEEDRATE)
#define DEFAULT_G0_FEEDRATE 3000 // (mm/m)
// Enable and set a (default) feedrate for all G0 moves
//#define G0_FEEDRATE 3000 // (mm/m)
#ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif
/**

8
Marlin/src/config/examples/Tronxy/X3A/Configuration_adv.h
View File

@ -1613,9 +1613,11 @@
*/
//#define PAREN_COMMENTS // Support for parentheses-delimited comments
//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
//#define G0_FEEDRATE // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
#if ENABLED(G0_FEEDRATE)
#define DEFAULT_G0_FEEDRATE 3000 // (mm/m)
// Enable and set a (default) feedrate for all G0 moves
//#define G0_FEEDRATE 3000 // (mm/m)
#ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif
/**

8
Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h
View File

@ -1613,9 +1613,11 @@
*/
//#define PAREN_COMMENTS // Support for parentheses-delimited comments
//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
//#define G0_FEEDRATE // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
#if ENABLED(G0_FEEDRATE)
#define DEFAULT_G0_FEEDRATE 3000 // (mm/m)
// Enable and set a (default) feedrate for all G0 moves
//#define G0_FEEDRATE 3000 // (mm/m)
#ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif
/**

8
Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h
View File

@ -1626,9 +1626,11 @@
*/
//#define PAREN_COMMENTS // Support for parentheses-delimited comments
//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
//#define G0_FEEDRATE // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
#if ENABLED(G0_FEEDRATE)
#define DEFAULT_G0_FEEDRATE 3000 // (mm/m)
// Enable and set a (default) feedrate for all G0 moves
//#define G0_FEEDRATE 3000 // (mm/m)
#ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif
/**

8
Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h
View File

@ -1613,9 +1613,11 @@
*/
//#define PAREN_COMMENTS // Support for parentheses-delimited comments
//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
//#define G0_FEEDRATE // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
#if ENABLED(G0_FEEDRATE)
#define DEFAULT_G0_FEEDRATE 3000 // (mm/m)
// Enable and set a (default) feedrate for all G0 moves
//#define G0_FEEDRATE 3000 // (mm/m)
#ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif
/**

8
Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration_adv.h
View File

@ -1615,9 +1615,11 @@
*/
//#define PAREN_COMMENTS // Support for parentheses-delimited comments
//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
//#define G0_FEEDRATE // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
#if ENABLED(G0_FEEDRATE)
#define DEFAULT_G0_FEEDRATE 3000 // (mm/m)
// Enable and set a (default) feedrate for all G0 moves
//#define G0_FEEDRATE 3000 // (mm/m)
#ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif
/**

8
Marlin/src/config/examples/delta/Anycubic/Kossel/Configuration_adv.h
View File

@ -1615,9 +1615,11 @@
*/
//#define PAREN_COMMENTS // Support for parentheses-delimited comments
//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
//#define G0_FEEDRATE // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
#if ENABLED(G0_FEEDRATE)
#define DEFAULT_G0_FEEDRATE 3000 // (mm/m)
// Enable and set a (default) feedrate for all G0 moves
//#define G0_FEEDRATE 3000 // (mm/m)
#ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif
/**

8
Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h
View File

@ -1615,9 +1615,11 @@
*/
//#define PAREN_COMMENTS // Support for parentheses-delimited comments
//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
//#define G0_FEEDRATE // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
#if ENABLED(G0_FEEDRATE)
#define DEFAULT_G0_FEEDRATE 3000 // (mm/m)
// Enable and set a (default) feedrate for all G0 moves
//#define G0_FEEDRATE 3000 // (mm/m)
#ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif
/**

8
Marlin/src/config/examples/delta/FLSUN/kossel/Configuration_adv.h
View File

@ -1615,9 +1615,11 @@
*/
//#define PAREN_COMMENTS // Support for parentheses-delimited comments
//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
//#define G0_FEEDRATE // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
#if ENABLED(G0_FEEDRATE)
#define DEFAULT_G0_FEEDRATE 3000 // (mm/m)
// Enable and set a (default) feedrate for all G0 moves
//#define G0_FEEDRATE 3000 // (mm/m)
#ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif
/**

8
Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h
View File

@ -1615,9 +1615,11 @@
*/
//#define PAREN_COMMENTS // Support for parentheses-delimited comments
//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
//#define G0_FEEDRATE // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
#if ENABLED(G0_FEEDRATE)
#define DEFAULT_G0_FEEDRATE 3000 // (mm/m)
// Enable and set a (default) feedrate for all G0 moves
//#define G0_FEEDRATE 3000 // (mm/m)
#ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif
/**

8
Marlin/src/config/examples/delta/generic/Configuration_adv.h
View File

@ -1615,9 +1615,11 @@
*/
//#define PAREN_COMMENTS // Support for parentheses-delimited comments
//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
//#define G0_FEEDRATE // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
#if ENABLED(G0_FEEDRATE)
#define DEFAULT_G0_FEEDRATE 3000 // (mm/m)
// Enable and set a (default) feedrate for all G0 moves
//#define G0_FEEDRATE 3000 // (mm/m)
#ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif
/**

8
Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h
View File

@ -1615,9 +1615,11 @@
*/
//#define PAREN_COMMENTS // Support for parentheses-delimited comments
//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
//#define G0_FEEDRATE // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
#if ENABLED(G0_FEEDRATE)
#define DEFAULT_G0_FEEDRATE 3000 // (mm/m)
// Enable and set a (default) feedrate for all G0 moves
//#define G0_FEEDRATE 3000 // (mm/m)
#ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif
/**

8
Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h
View File

@ -1615,9 +1615,11 @@
*/
//#define PAREN_COMMENTS // Support for parentheses-delimited comments
//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
//#define G0_FEEDRATE // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
#if ENABLED(G0_FEEDRATE)
#define DEFAULT_G0_FEEDRATE 3000 // (mm/m)
// Enable and set a (default) feedrate for all G0 moves
//#define G0_FEEDRATE 3000 // (mm/m)
#ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif
/**

8
Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h
View File

@ -1613,9 +1613,11 @@
*/
//#define PAREN_COMMENTS // Support for parentheses-delimited comments
//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
//#define G0_FEEDRATE // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
#if ENABLED(G0_FEEDRATE)
#define DEFAULT_G0_FEEDRATE 3000 // (mm/m)
// Enable and set a (default) feedrate for all G0 moves
//#define G0_FEEDRATE 3000 // (mm/m)
#ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif
/**

8
Marlin/src/config/examples/makibox/Configuration_adv.h
View File

@ -1613,9 +1613,11 @@
*/
//#define PAREN_COMMENTS // Support for parentheses-delimited comments
//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
//#define G0_FEEDRATE // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
#if ENABLED(G0_FEEDRATE)
#define DEFAULT_G0_FEEDRATE 3000 // (mm/m)
// Enable and set a (default) feedrate for all G0 moves
//#define G0_FEEDRATE 3000 // (mm/m)
#ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif
/**

8
Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h
View File

@ -1613,9 +1613,11 @@
*/
//#define PAREN_COMMENTS // Support for parentheses-delimited comments
//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
//#define G0_FEEDRATE // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
#if ENABLED(G0_FEEDRATE)
#define DEFAULT_G0_FEEDRATE 3000 // (mm/m)
// Enable and set a (default) feedrate for all G0 moves
//#define G0_FEEDRATE 3000 // (mm/m)
#ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif
/**

8
Marlin/src/config/examples/wt150/Configuration_adv.h
View File

@ -1614,9 +1614,11 @@
*/
//#define PAREN_COMMENTS // Support for parentheses-delimited comments
//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
//#define G0_FEEDRATE // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
#if ENABLED(G0_FEEDRATE)
#define DEFAULT_G0_FEEDRATE 3000 // (mm/m)
// Enable and set a (default) feedrate for all G0 moves
//#define G0_FEEDRATE 3000 // (mm/m)
#ifdef G0_FEEDRATE
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
#endif
/**