bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity

Password via G-code and MarlinUI (#18399)

Browse Source 
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
This commit is contained in:
sherwin-dc 2020-08-09 09:00:42 +08:00 committed by Scott Lahteine
parent 438a9bb4aa
commit 9e44df9c5f
19 changed files with 588 additions and 25 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

31
Marlin/Configuration.h
View File

@ -1642,6 +1642,37 @@
*/
//#define PRINTCOUNTER
/**
* Password
*
* Set a numerical password for the printer which can be requested:
*
* - When the printer boots up
* - Upon opening the 'Print from Media' Menu
* - When SD printing is completed or aborted
*
* The following G-codes can be used:
*
* M510 - Lock Printer. Blocks all commands except M511.
* M511 - Unlock Printer.
* M512 - Set, Change and Remove Password.
*
* If you forget the password and get locked out you'll need to re-flash
* the firmware with the feature disabled, reset EEPROM, and (optionally)
* re-flash the firmware again with this feature enabled.
*/
//#define PASSWORD_FEATURE
#if ENABLED(PASSWORD_FEATURE)
#define PASSWORD_LENGTH 4 // (#) Number of digits (1-9). 3 or 4 is recommended
#define PASSWORD_ON_STARTUP
#define PASSWORD_UNLOCK_GCODE // Unlock with the M511 P<password> command. Disable to prevent brute-force attack.
#define PASSWORD_CHANGE_GCODE // Change the password with M512 P<old> N<new>.
//#define PASSWORD_ON_SD_PRINT_MENU // This does not prevent gcodes from running
//#define PASSWORD_AFTER_SD_PRINT_END
//#define PASSWORD_AFTER_SD_PRINT_ABORT
//#include "Configuration_Secure.h" // External file with PASSWORD_DEFAULT_VALUE
#endif
//=============================================================================
//============================= LCD and SD support ============================
//=============================================================================

14
Marlin/src/MarlinCore.cpp
View File

@ -213,6 +213,10 @@
#include "libs/L64XX/L64XX_Marlin.h"
#endif
#if ENABLED(PASSWORD_FEATURE)
#include "feature/password/password.h"
#endif
PGMSTR(NUL_STR, "");
PGMSTR(M112_KILL_STR, "M112 Shutdown");
PGMSTR(G28_STR, "G28");
@ -452,11 +456,15 @@ void startOrResumeJob() {
#ifdef EVENT_GCODE_SD_STOP
queue.inject_P(PSTR(EVENT_GCODE_SD_STOP));
#endif
TERN_(PASSWORD_AFTER_SD_PRINT_ABORT, password.lock_machine());
}
inline void finishSDPrinting() {
if (queue.enqueue_one_P(PSTR("M1001")))
if (queue.enqueue_one_P(PSTR("M1001"))) {
marlin_state = MF_RUNNING;
TERN_(PASSWORD_AFTER_SD_PRINT_END, password.lock_machine());
}
}
#endif // SDSUPPORT
@ -1205,6 +1213,10 @@ void setup() {
SETUP_RUN(tft_lvgl_init());
#endif
#if ENABLED(PASSWORD_ON_STARTUP)
SETUP_RUN(password.lock_machine()); // Will not proceed until correct password provided
#endif
marlin_state = MF_RUNNING;
SETUP_LOG("setup() completed.");

7
Marlin/src/core/language.h
View File

@ -266,6 +266,13 @@
#define STR_DEBUG_COMMUNICATION "COMMUNICATION"
#define STR_DEBUG_LEVELING "LEVELING"
#define STR_PRINTER_LOCKED "Printer locked! (Unlock with M511 or LCD)"
#define STR_WRONG_PASSWORD "Incorrect Password"
#define STR_PASSWORD_TOO_LONG "Password too long"
#define STR_PASSWORD_REMOVED "Password removed"
#define STR_REMINDER_SAVE_SETTINGS "Remember to save!"
#define STR_PASSWORD_SET "Password is "
// LCD Menu Messages
#define LANGUAGE_DATA_INCL_(M) STRINGIFY_(fontdata/langdata_##M.h)

51
Marlin/src/core/macros.h
View File

@ -342,15 +342,22 @@
#endif
// Macros for adding
#define INC_0 1
#define INC_1 2
#define INC_2 3
#define INC_3 4
#define INC_4 5
#define INC_5 6
#define INC_6 7
#define INC_7 8
#define INC_8 9
#define INC_0 1
#define INC_1 2
#define INC_2 3
#define INC_3 4
#define INC_4 5
#define INC_5 6
#define INC_6 7
#define INC_7 8
#define INC_8 9
#define INC_9 10
#define INC_10 11
#define INC_11 12
#define INC_12 13
#define INC_13 14
#define INC_14 15
#define INC_15 16
#define INCREMENT_(n) INC_##n
#define INCREMENT(n) INCREMENT_(n)
@ -367,16 +374,22 @@
#define ADD10(N) ADD5(ADD5(N))
// Macros for subtracting
#define DEC_0 0
#define DEC_1 0
#define DEC_2 1
#define DEC_3 2
#define DEC_4 3
#define DEC_5 4
#define DEC_6 5
#define DEC_7 6
#define DEC_8 7
#define DEC_9 8
#define DEC_0 0
#define DEC_1 0
#define DEC_2 1
#define DEC_3 2
#define DEC_4 3
#define DEC_5 4
#define DEC_6 5
#define DEC_7 6
#define DEC_8 7
#define DEC_9 8
#define DEC_10 9
#define DEC_11 10
#define DEC_12 11
#define DEC_13 12
#define DEC_14 13
#define DEC_15 14
#define DECREMENT_(n) DEC_##n
#define DECREMENT(n) DECREMENT_(n)

58
Marlin/src/feature/password/password.cpp Normal file
View File

@ -0,0 +1,58 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#include "../../inc/MarlinConfigPre.h"
#if ENABLED(PASSWORD_FEATURE)
#include "password.h"
#include "../../gcode/gcode.h"
#include "../../core/serial.h"
Password password;
// public:
bool Password::is_set, Password::is_locked;
uint32_t Password::value, Password::value_entry;
//
// Authenticate user with password.
// Called from Setup, after SD Prinitng Stops/Aborts, and M510
//
void Password::lock_machine() {
is_locked = true;
TERN_(HAS_LCD_MENU, authenticate_user(ui.status_screen, screen_password_entry));
}
//
// Authentication check
//
void Password::authentication_check() {
if (value_entry == value)
is_locked = false;
else
SERIAL_ECHOLNPGM(STR_WRONG_PASSWORD);
TERN_(HAS_LCD_MENU, authentication_done());
}
#endif // PASSWORD_FEATURE

57
Marlin/src/feature/password/password.h Normal file
View File

@ -0,0 +1,57 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#pragma once
#include "../../lcd/ultralcd.h"
class Password {
public:
static bool is_set, is_locked;
static uint32_t value, value_entry;
Password() { is_locked = false; }
static void lock_machine();
#if HAS_LCD_MENU
static void access_menu_password();
static void authentication_check();
static void authentication_done();
static void media_gatekeeper();
private:
static void authenticate_user(const screenFunc_t, const screenFunc_t);
static void menu_password();
static void menu_password_entry();
static void screen_password_entry();
static void screen_set_password();
static void start_over();
static void digit_entered();
static void set_password_done();
static void menu_password_report();
static void remove_password();
#endif
};
extern Password password;

83
Marlin/src/gcode/feature/password/M510-M512.cpp Normal file
View File

@ -0,0 +1,83 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#include "../../../inc/MarlinConfigPre.h"
#if ENABLED(PASSWORD_FEATURE)
#include "../../../feature/password/password.h"
#include "../../../core/serial.h"
#include "../../gcode.h"
//
// M510: Lock Printer
//
void GcodeSuite::M510() {
password.lock_machine();
}
//
// M511: Unlock Printer
//
#if ENABLED(PASSWORD_UNLOCK_GCODE)
void GcodeSuite::M511() {
if (password.is_locked) {
password.value_entry = parser.ulongval('P');
password.authentication_check();
}
}
#endif // PASSWORD_UNLOCK_GCODE
//
// M512: Set/Change/Remove Password
//
#if ENABLED(PASSWORD_CHANGE_GCODE)
void GcodeSuite::M512() {
if (password.is_set && parser.ulongval('P') != password.value) {
SERIAL_ECHOLNPGM(STR_WRONG_PASSWORD);
return;
}
if (parser.seenval('N')) {
password.value_entry = parser.ulongval('N');
if (password.value_entry < CAT(1e, PASSWORD_LENGTH)) {
password.is_set = true;
password.value = password.value_entry;
SERIAL_ECHOLNPAIR(STR_PASSWORD_SET, password.value); // TODO: Update password.string
}
else
SERIAL_ECHOLNPGM(STR_PASSWORD_TOO_LONG);
}
else {
password.is_set = false;
SERIAL_ECHOLNPGM(STR_PASSWORD_REMOVED);
}
SERIAL_ECHOLNPGM(STR_REMINDER_SAVE_SETTINGS);
}
#endif // PASSWORD_CHANGE_GCODE
#endif // PASSWORD_FEATURE

25
Marlin/src/gcode/gcode.cpp
View File

@ -57,6 +57,10 @@ GcodeSuite gcode;
#include "../feature/spindle_laser.h"
#endif
#if ENABLED(PASSWORD_FEATURE)
#include "../feature/password/password.h"
#endif
#include "../MarlinCore.h" // for idle()
// Inactivity shutdown
@ -241,6 +245,17 @@ void GcodeSuite::dwell(millis_t time) {
void GcodeSuite::process_parsed_command(const bool no_ok/*=false*/) {
KEEPALIVE_STATE(IN_HANDLER);
/**
* Block all Gcodes except M511 Unlock Printer, if printer is locked
* Will still block Gcodes if M511 is disabled, in which case the printer should be unlocked via LCD Menu
*/
#if ENABLED(PASSWORD_FEATURE)
if (password.is_locked && !(parser.command_letter == 'M' && parser.codenum == 511)) {
SERIAL_ECHO_MSG(STR_PRINTER_LOCKED);
return;
}
#endif
// Handle a known G, M, or T
switch (parser.command_letter) {
case 'G': switch (parser.codenum) {
@ -736,6 +751,16 @@ void GcodeSuite::process_parsed_command(const bool no_ok/*=false*/) {
case 504: M504(); break; // M504: Validate EEPROM contents
#endif
#if ENABLED(PASSWORD_FEATURE)
case 510: M510(); break; // M510: Lock Printer
#if ENABLED(PASSWORD_UNLOCK_GCODE)
case 511: M511(); break; // M511: Unlock Printer
#endif
#if ENABLED(PASSWORD_CHANGE_GCODE)
case 512: M512(); break;
#endif // M512: Set/Change/Remove Password
#endif
#if ENABLED(SDSUPPORT)
case 524: M524(); break; // M524: Abort the current SD print job
#endif

13
Marlin/src/gcode/gcode.h
View File

@ -225,6 +225,9 @@
* M502 - Revert to the default "factory settings". ** Does not write them to EEPROM! **
* M503 - Print the current settings (in memory): "M503 S<verbose>". S0 specifies compact output.
* M504 - Validate EEPROM contents. (Requires EEPROM_SETTINGS)
* M510 - Lock Printer
* M511 - Unlock Printer
* M512 - Set/Change/Remove Password
* M524 - Abort the current SD print job started with M24. (Requires SDSUPPORT)
* M540 - Enable/disable SD card abort on endstop hit: "M540 S<state>". (Requires SD_ABORT_ON_ENDSTOP_HIT)
* M569 - Enable stealthChop on an axis. (Requires at least one _DRIVER_TYPE to be TMC2130/2160/2208/2209/5130/5160)
@ -760,6 +763,16 @@ private:
#endif
TERN_(EEPROM_SETTINGS, static void M504());
#if ENABLED(PASSWORD_FEATURE)
static void M510();
#if ENABLED(PASSWORD_UNLOCK_GCODE)
static void M511();
#endif
#if ENABLED(PASSWORD_CHANGE_GCODE)
static void M512();
#endif
#endif
TERN_(SDSUPPORT, static void M524());
TERN_(SD_ABORT_ON_ENDSTOP_HIT, static void M540());

11
Marlin/src/inc/SanityCheck.h
View File

@ -3083,5 +3083,16 @@ static_assert( _ARR_TEST(3,0) && _ARR_TEST(3,1) && _ARR_TEST(3,2)
#error "ESP3D_WIFISUPPORT or WIFISUPPORT requires an ESP32 controller."
#endif
/**
* Sanity Check for Password Feature
*/
#if ENABLED(PASSWORD_FEATURE)
#if NONE(HAS_LCD_MENU, PASSWORD_UNLOCK_GCODE, PASSWORD_CHANGE_GCODE)
#error "Without PASSWORD_UNLOCK_GCODE, PASSWORD_CHANGE_GCODE, or a supported LCD there's no way to unlock the printer or set a password."
#elif DISABLED(EEPROM_SETTINGS)
#warning "PASSWORD_FEATURE settings will be lost on power-off without EEPROM_SETTINGS."
#endif
#endif
// Misc. Cleanup
#undef _TEST_PWM

11
Marlin/src/lcd/language/language_en.h
View File

@ -588,6 +588,17 @@ namespace Language_en {
PROGMEM Language_Str MSG_BAD_PAGE = _UxGT("Bad page index");
PROGMEM Language_Str MSG_BAD_PAGE_SPEED = _UxGT("Bad page speed");
PROGMEM Language_Str MSG_EDIT_PASSWORD = _UxGT("Edit Password");
PROGMEM Language_Str MSG_LOGIN_REQUIRED = _UxGT("Login Required");
PROGMEM Language_Str MSG_PASSWORD_SETTINGS = _UxGT("Password Settings");
PROGMEM Language_Str MSG_ENTER_DIGIT = _UxGT("Enter Digit");
PROGMEM Language_Str MSG_CHANGE_PASSWORD = _UxGT("Set/Edit Password");
PROGMEM Language_Str MSG_REMOVE_PASSWORD = _UxGT("Remove Password");
PROGMEM Language_Str MSG_PASSWORD_SET = _UxGT("Password is ");
PROGMEM Language_Str MSG_START_OVER = _UxGT("Start Over");
PROGMEM Language_Str MSG_REMINDER_SAVE_SETTINGS = _UxGT("Remember to Save!");
PROGMEM Language_Str MSG_PASSWORD_REMOVED = _UxGT("Password Removed");
//
// Filament Change screens show up to 3 lines on a 4-line display
// ...or up to 2 lines on a 3-line display

8
Marlin/src/lcd/menu/menu_advanced.cpp
View File

@ -51,6 +51,10 @@
#include "../../module/settings.h"
#endif
#if ENABLED(PASSWORD_FEATURE)
#include "../../feature/password/password.h"
#endif
void menu_tmc();
void menu_backlash();
@ -603,6 +607,10 @@ void menu_advanced_settings() {
});
#endif
#if ENABLED(PASSWORD_FEATURE)
SUBMENU(MSG_PASSWORD_SETTINGS, password.access_menu_password);
#endif
#if ENABLED(EEPROM_SETTINGS) && DISABLED(SLIM_LCD_MENUS)
CONFIRM_ITEM(MSG_INIT_EEPROM,
MSG_BUTTON_INIT, MSG_BUTTON_CANCEL,

8
Marlin/src/lcd/menu/menu_main.cpp
View File

@ -50,6 +50,10 @@
#include "../../lcd/menu/menu_mmu2.h"
#endif
#if ENABLED(PASSWORD_FEATURE)
#include "../../feature/password/password.h"
#endif
void menu_tune();
void menu_cancelobject();
void menu_motion();
@ -133,7 +137,7 @@ void menu_main() {
if (card_detected) {
if (!card_open) {
SUBMENU(MSG_MEDIA_MENU, menu_media);
SUBMENU(MSG_MEDIA_MENU, TERN(PASSWORD_ON_SD_PRINT_MENU, password.media_gatekeeper, menu_media));
MENU_ITEM(gcode,
#if PIN_EXISTS(SD_DETECT)
MSG_CHANGE_MEDIA, M21_STR
@ -240,7 +244,7 @@ void menu_main() {
MSG_RELEASE_MEDIA, PSTR("M22")
#endif
);
SUBMENU(MSG_MEDIA_MENU, menu_media);
SUBMENU(MSG_MEDIA_MENU, TERN(PASSWORD_ON_SD_PRINT_MENU, password.media_gatekeeper, menu_media));
}
}
else {

184
Marlin/src/lcd/menu/menu_password.cpp Normal file
View File

@ -0,0 +1,184 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
//
// Advanced Settings Menus
//
#include "../../inc/MarlinConfigPre.h"
#if BOTH(HAS_LCD_MENU, PASSWORD_FEATURE)
#include "../../feature/password/password.h"
#include "menu.h"
#include "menu_addon.h"
void menu_advanced_settings();
screenFunc_t success_screen, fail_screen;
bool authenticating; // = false
char string[(PASSWORD_LENGTH) + 1];
static uint8_t digit_no;
//
// Screen for both editing and setting the password
//
void Password::menu_password_entry() {
START_MENU();
// "Login" or "New Code"
STATIC_ITEM_P(authenticating ? GET_TEXT(MSG_LOGIN_REQUIRED) : GET_TEXT(MSG_EDIT_PASSWORD), SS_CENTER|SS_INVERT);
STATIC_ITEM_P(PSTR(""), SS_CENTER|SS_INVERT, string);
// Make the digit edit item look like a sub-menu
PGM_P const label = GET_TEXT(MSG_ENTER_DIGIT);
EDIT_ITEM_P(uint8, label, &editable.uint8, 0, 9, digit_entered);
MENU_ITEM_ADDON_START(utf8_strlen_P(label) + 1);
lcd_put_wchar(' ');
lcd_put_wchar('1' + digit_no);
SETCURSOR_X(LCD_WIDTH - 1);
lcd_put_wchar('>');
MENU_ITEM_ADDON_END();
ACTION_ITEM(MSG_START_OVER, start_over);
if (!authenticating) BACK_ITEM(MSG_BUTTON_CANCEL);
END_MENU();
}
//
// Authentication check
//
void Password::authentication_done() {
ui.goto_screen(is_locked ? fail_screen : success_screen);
ui.completion_feedback(!is_locked);
}
// A single digit was completed
void Password::digit_entered() {
uint32_t multiplier = CAT(1e, PASSWORD_LENGTH); // 1e5 = 100000
LOOP_LE_N(i, digit_no) multiplier /= 10;
value_entry += editable.uint8 * multiplier;
string[digit_no++] = '0' + editable.uint8;
// Exit edit screen menu and go to another screen
ui.goto_previous_screen();
ui.use_click();
ui.goto_screen(menu_password_entry);
// After password has been keyed in
if (digit_no == PASSWORD_LENGTH) {
if (authenticating)
authentication_check();
else
set_password_done();
}
}
//
// Set/Change Password
//
void Password::screen_password_entry() {
value_entry = 0;
digit_no = 0;
editable.uint8 = 0;
memset(string, '-', PASSWORD_LENGTH);
string[PASSWORD_LENGTH] = '\0';
menu_password_entry();
}
void Password::screen_set_password() {
authenticating = false;
screen_password_entry();
}
void Password::authenticate_user(const screenFunc_t in_succ_scr, const screenFunc_t in_fail_scr) {
success_screen = in_succ_scr;
fail_screen = in_fail_scr;
if (is_set) {
authenticating = true;
ui.goto_screen(screen_password_entry);
ui.defer_status_screen();
ui.update();
}
else {
ui.goto_screen(in_succ_scr);
is_locked = false;
}
}
void Password::access_menu_password() {
authenticate_user(menu_password, menu_advanced_settings);
}
#if ENABLED(PASSWORD_ON_SD_PRINT_MENU)
void Password::media_gatekeeper() {
authenticate_user(menu_media, menu_main);
}
#endif
void Password::start_over() {
ui.goto_previous_screen(); // Goto previous screen, if any
ui.goto_screen(screen_password_entry);
}
void Password::menu_password_report() {
START_SCREEN();
BACK_ITEM(MSG_PASSWORD_SETTINGS);
STATIC_ITEM(MSG_PASSWORD_SET, SS_LEFT, string);
STATIC_ITEM(MSG_REMINDER_SAVE_SETTINGS, SS_LEFT);
END_SCREEN();
}
void Password::set_password_done() {
is_set = true;
value = value_entry;
ui.completion_feedback(true);
ui.goto_screen(menu_password_report);
}
void Password::remove_password() {
is_set = false;
string[0] = '0';
string[1] = '\0';
ui.completion_feedback(true);
ui.goto_screen(menu_password_report);
}
//
// Password Menu
//
void Password::menu_password() {
START_MENU();
BACK_ITEM(MSG_ADVANCED_SETTINGS);
SUBMENU(MSG_CHANGE_PASSWORD, screen_set_password);
ACTION_ITEM(MSG_REMOVE_PASSWORD, []{ ui.save_previous_screen(); remove_password(); } );
#if ENABLED(EEPROM_SETTINGS)
ACTION_ITEM(MSG_STORE_EEPROM, ui.store_settings);
#endif
END_MENU();
}
#endif // HAS_LCD_MENU && PASSWORD_FEATURE

42
Marlin/src/module/settings.cpp
View File

@ -140,6 +140,10 @@
#define HAS_CASE_LIGHT_BRIGHTNESS 1
#endif
#if ENABLED(PASSWORD_FEATURE)
#include "../feature/password/password.h"
#endif
#if ENABLED(TOUCH_SCREEN_CALIBRATION)
#include "../lcd/tft/touch.h"
#endif
@ -152,7 +156,7 @@ typedef struct { int16_t X, Y, Z, X2, Y2, Z2, Z3, Z4;
typedef struct { bool X, Y, Z, X2, Y2, Z2, Z3, Z4, E0, E1, E2, E3, E4, E5, E6, E7; } tmc_stealth_enabled_t;
// Limit an index to an array size
#define ALIM(I,ARR) _MIN(I, signed(COUNT(ARR) - 1))
#define ALIM(I,ARR) _MIN(I, (signed)COUNT(ARR) - 1)
// Defaults for reset / fill in on load
static const uint32_t _DMA[] PROGMEM = DEFAULT_MAX_ACCELERATION;
@ -407,6 +411,14 @@ typedef struct SettingsDataStruct {
uint8_t caselight_brightness; // M355 P
#endif
//
// PASSWORD_FEATURE
//
#if ENABLED(PASSWORD_FEATURE)
bool password_is_set;
uint32_t password_value;
#endif
//
// TOUCH_SCREEN_CALIBRATION
//
@ -1345,6 +1357,14 @@ void MarlinSettings::postprocess() {
EEPROM_WRITE(caselight.brightness);
#endif
//
// Password feature
//
#if ENABLED(PASSWORD_FEATURE)
EEPROM_WRITE(password.is_set);
EEPROM_WRITE(password.value);
#endif
//
// TOUCH_SCREEN_CALIBRATION
//
@ -2185,6 +2205,15 @@ void MarlinSettings::postprocess() {
EEPROM_READ(caselight.brightness);
#endif
//
// Password feature
//
#if ENABLED(PASSWORD_FEATURE)
_FIELD_TEST(password_is_set);
EEPROM_READ(password.is_set);
EEPROM_READ(password.value);
#endif
//
// TOUCH_SCREEN_CALIBRATION
//
@ -2665,7 +2694,7 @@ void MarlinSettings::reset() {
#define PID_DEFAULT(N,E) DEFAULT_##N
#endif
HOTEND_LOOP() {
PID_PARAM(Kp, e) = float(PID_DEFAULT(Kp, ALIM(e, defKp)));
PID_PARAM(Kp, e) = float(PID_DEFAULT(Kp, ALIM(e, defKp)));
PID_PARAM(Ki, e) = scalePID_i(PID_DEFAULT(Ki, ALIM(e, defKi)));
PID_PARAM(Kd, e) = scalePID_d(PID_DEFAULT(Kd, ALIM(e, defKd)));
TERN_(PID_EXTRUSION_SCALING, PID_PARAM(Kc, e) = float(PID_DEFAULT(Kc, ALIM(e, defKc))));
@ -2783,6 +2812,15 @@ void MarlinSettings::reset() {
}
#endif
#if ENABLED(PASSWORD_FEATURE)
#ifdef PASSWORD_DEFAULT_VALUE
password.is_set = true;
password.value = PASSWORD_DEFAULT_VALUE;
#else
password.is_set = false;
#endif
#endif
postprocess();
DEBUG_ECHO_START();

3
buildroot/share/PlatformIO/scripts/common-dependencies.h
View File

@ -143,6 +143,9 @@
#if ENABLED(MMU2_MENUS)
#define HAS_MENU_MMU2
#endif
#if ENABLED(PASSWORD_FEATURE)
#define HAS_MENU_PASSWORD
#endif
#if HAS_TRINAMIC_CONFIG
#define HAS_MENU_TMC
#endif

2
buildroot/tests/DUE-tests
View File

@ -33,7 +33,7 @@ opt_set EXTRUDER_AUTO_FAN_SPEED 100
opt_set TEMP_SENSOR_CHAMBER 3
opt_add TEMP_CHAMBER_PIN 6
opt_set HEATER_CHAMBER_PIN 45
exec_test $1 $2 "RAMPS4DUE_EFB with ABL (Bilinear), EXTENSIBLE_UI, S-Curve, many options."
exec_test $1 $2 "RAMPS4DUE_EFB with ABL (Bilinear), ExtUI, S-Curve, many options."
restore_configs
opt_set MOTHERBOARD BOARD_RADDS

1
buildroot/tests/rambo-tests
View File

@ -33,6 +33,7 @@ opt_enable REPRAP_DISCOUNT_SMART_CONTROLLER LCD_PROGRESS_BAR LCD_PROGRESS_BAR_TE
PRINTCOUNTER SERVICE_NAME_1 SERVICE_INTERVAL_1 LEVEL_BED_CORNERS \
NOZZLE_PARK_FEATURE FILAMENT_RUNOUT_SENSOR FILAMENT_RUNOUT_DISTANCE_MM \
ADVANCED_PAUSE_FEATURE FILAMENT_LOAD_UNLOAD_GCODES FILAMENT_UNLOAD_ALL_EXTRUDERS \
PASSWORD_FEATURE PASSWORD_ON_STARTUP PASSWORD_ON_SD_PRINT_MENU PASSWORD_AFTER_SD_PRINT_END PASSWORD_AFTER_SD_PRINT_ABORT \
AUTO_BED_LEVELING_BILINEAR Z_MIN_PROBE_REPEATABILITY_TEST DISTINCT_E_FACTORS \
SKEW_CORRECTION SKEW_CORRECTION_FOR_Z SKEW_CORRECTION_GCODE \
BACKLASH_COMPENSATION BACKLASH_GCODE BAUD_RATE_GCODE BEZIER_CURVE_SUPPORT \

4
platformio.ini
View File

@ -41,6 +41,7 @@ default_src_filter = +<src/*> -<src/config> -<src/HAL> +<src/HAL/shared>
-<src/lcd/menu/menu_led.cpp>
-<src/lcd/menu/menu_media.cpp>
-<src/lcd/menu/menu_mmu2.cpp>
-<src/lcd/menu/menu_password.cpp>
-<src/lcd/menu/menu_power_monitor.cpp>
-<src/lcd/menu/menu_spindle_laser.cpp>
-<src/lcd/menu/menu_temperature.cpp>
@ -86,6 +87,7 @@ default_src_filter = +<src/*> -<src/config> -<src/HAL> +<src/HAL/shared>
-<src/feature/max7219.cpp>
-<src/feature/mixing.cpp>
-<src/feature/mmu2> -<src/gcode/feature/prusa_MMU2>
-<src/feature/password> -<src/gcode/feature/password>
-<src/feature/pause.cpp>
-<src/feature/power.cpp>
-<src/feature/power_monitor.cpp> -<src/gcode/feature/power_monitor>
@ -231,6 +233,7 @@ HAS_MENU_LED = src_filter=+<src/lcd/menu/menu_led.cpp>
HAS_MENU_MEDIA = src_filter=+<src/lcd/menu/menu_media.cpp>
HAS_MENU_MIXER = src_filter=+<src/lcd/menu/menu_mixer.cpp>
HAS_MENU_MMU2 = src_filter=+<src/lcd/menu/menu_mmu2.cpp>
HAS_MENU_PASSWORD = src_filter=+<src/lcd/menu/menu_password.cpp>
HAS_MENU_POWER_MONITOR = src_filter=+<src/lcd/menu/menu_power_monitor.cpp>
HAS_MENU_CUTTER = src_filter=+<src/lcd/menu/menu_spindle_laser.cpp>
HAS_MENU_TEMPERATURE = src_filter=+<src/lcd/menu/menu_temperature.cpp>
@ -276,6 +279,7 @@ TEMP_STAT_LEDS = src_filter=+<src/feature/leds/tempstat.cpp>
MAX7219_DEBUG = src_filter=+<src/feature/max7219.cpp> +<src/gcode/feature/leds/M7219.cpp>
MIXING_EXTRUDER = src_filter=+<src/feature/mixing.cpp> +<src/gcode/feature/mixing/M163-M165.cpp>
PRUSA_MMU2 = src_filter=+<src/feature/mmu2> +<src/gcode/feature/prusa_MMU2>
PASSWORD_FEATURE = src_filter=+<src/feature/password> +<src/gcode/feature/password>
ADVANCED_PAUSE_FEATURE = src_filter=+<src/feature/pause.cpp> +<src/gcode/feature/pause/M600.cpp> +<src/gcode/feature/pause/M603.cpp>
AUTO_POWER_CONTROL = src_filter=+<src/feature/power.cpp>
HAS_POWER_MONITOR = src_filter=+<src/feature/power_monitor.cpp> +<src/gcode/feature/power_monitor>