Add EDITABLE_SERVO_ANGLES to example configs

This commit is contained in:
Scott Lahteine 2018-08-25 03:22:59 -05:00
parent 0966bdcbc4
commit 9953213513
68 changed files with 272 additions and 204 deletions

View File

@ -1940,9 +1940,10 @@
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
// Servo deactivation // Only power servos during movement, otherwise leave off to prevent jitter
//
// With this option servos are powered only during movement, then turned off to prevent jitter.
//#define DEACTIVATE_SERVOS_AFTER_MOVE //#define DEACTIVATE_SERVOS_AFTER_MOVE
// Allow servo angle to be edited and saved to EEPROM
//#define EDITABLE_SERVO_ANGLES
#endif // CONFIGURATION_H #endif // CONFIGURATION_H

View File

@ -1946,9 +1946,10 @@
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
// Servo deactivation // Only power servos during movement, otherwise leave off to prevent jitter
//
// With this option servos are powered only during movement, then turned off to prevent jitter.
//#define DEACTIVATE_SERVOS_AFTER_MOVE //#define DEACTIVATE_SERVOS_AFTER_MOVE
// Allow servo angle to be edited and saved to EEPROM
//#define EDITABLE_SERVO_ANGLES
#endif // CONFIGURATION_H #endif // CONFIGURATION_H

View File

@ -2101,9 +2101,10 @@
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
// Servo deactivation // Only power servos during movement, otherwise leave off to prevent jitter
//
// With this option servos are powered only during movement, then turned off to prevent jitter.
//#define DEACTIVATE_SERVOS_AFTER_MOVE //#define DEACTIVATE_SERVOS_AFTER_MOVE
// Allow servo angle to be edited and saved to EEPROM
//#define EDITABLE_SERVO_ANGLES
#endif // CONFIGURATION_H #endif // CONFIGURATION_H

View File

@ -1929,9 +1929,10 @@
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
// Servo deactivation // Only power servos during movement, otherwise leave off to prevent jitter
//
// With this option servos are powered only during movement, then turned off to prevent jitter.
//#define DEACTIVATE_SERVOS_AFTER_MOVE //#define DEACTIVATE_SERVOS_AFTER_MOVE
// Allow servo angle to be edited and saved to EEPROM
//#define EDITABLE_SERVO_ANGLES
#endif // CONFIGURATION_H #endif // CONFIGURATION_H

View File

@ -1966,9 +1966,10 @@
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
// Servo deactivation // Only power servos during movement, otherwise leave off to prevent jitter
//
// With this option servos are powered only during movement, then turned off to prevent jitter.
//#define DEACTIVATE_SERVOS_AFTER_MOVE //#define DEACTIVATE_SERVOS_AFTER_MOVE
// Allow servo angle to be edited and saved to EEPROM
//#define EDITABLE_SERVO_ANGLES
#endif // CONFIGURATION_H #endif // CONFIGURATION_H

View File

@ -1920,9 +1920,10 @@
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
// Servo deactivation // Only power servos during movement, otherwise leave off to prevent jitter
//
// With this option servos are powered only during movement, then turned off to prevent jitter.
//#define DEACTIVATE_SERVOS_AFTER_MOVE //#define DEACTIVATE_SERVOS_AFTER_MOVE
// Allow servo angle to be edited and saved to EEPROM
//#define EDITABLE_SERVO_ANGLES
#endif // CONFIGURATION_H #endif // CONFIGURATION_H

View File

@ -1920,9 +1920,10 @@
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
// Servo deactivation // Only power servos during movement, otherwise leave off to prevent jitter
//
// With this option servos are powered only during movement, then turned off to prevent jitter.
//#define DEACTIVATE_SERVOS_AFTER_MOVE //#define DEACTIVATE_SERVOS_AFTER_MOVE
// Allow servo angle to be edited and saved to EEPROM
//#define EDITABLE_SERVO_ANGLES
#endif // CONFIGURATION_H #endif // CONFIGURATION_H

View File

@ -1908,9 +1908,10 @@
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
// Servo deactivation // Only power servos during movement, otherwise leave off to prevent jitter
//
// With this option servos are powered only during movement, then turned off to prevent jitter.
//#define DEACTIVATE_SERVOS_AFTER_MOVE //#define DEACTIVATE_SERVOS_AFTER_MOVE
// Allow servo angle to be edited and saved to EEPROM
//#define EDITABLE_SERVO_ANGLES
#endif // CONFIGURATION_H #endif // CONFIGURATION_H

View File

@ -1946,9 +1946,10 @@
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
// Servo deactivation // Only power servos during movement, otherwise leave off to prevent jitter
//
// With this option servos are powered only during movement, then turned off to prevent jitter.
//#define DEACTIVATE_SERVOS_AFTER_MOVE //#define DEACTIVATE_SERVOS_AFTER_MOVE
// Allow servo angle to be edited and saved to EEPROM
//#define EDITABLE_SERVO_ANGLES
#endif // CONFIGURATION_H #endif // CONFIGURATION_H

View File

@ -1908,9 +1908,10 @@
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
// Servo deactivation // Only power servos during movement, otherwise leave off to prevent jitter
//
// With this option servos are powered only during movement, then turned off to prevent jitter.
//#define DEACTIVATE_SERVOS_AFTER_MOVE //#define DEACTIVATE_SERVOS_AFTER_MOVE
// Allow servo angle to be edited and saved to EEPROM
//#define EDITABLE_SERVO_ANGLES
#endif // CONFIGURATION_H #endif // CONFIGURATION_H

View File

@ -1919,9 +1919,10 @@
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
// Servo deactivation // Only power servos during movement, otherwise leave off to prevent jitter
//
// With this option servos are powered only during movement, then turned off to prevent jitter.
//#define DEACTIVATE_SERVOS_AFTER_MOVE //#define DEACTIVATE_SERVOS_AFTER_MOVE
// Allow servo angle to be edited and saved to EEPROM
//#define EDITABLE_SERVO_ANGLES
#endif // CONFIGURATION_H #endif // CONFIGURATION_H

View File

@ -1956,9 +1956,10 @@
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
// Servo deactivation // Only power servos during movement, otherwise leave off to prevent jitter
//
// With this option servos are powered only during movement, then turned off to prevent jitter.
//#define DEACTIVATE_SERVOS_AFTER_MOVE //#define DEACTIVATE_SERVOS_AFTER_MOVE
// Allow servo angle to be edited and saved to EEPROM
//#define EDITABLE_SERVO_ANGLES
#endif // CONFIGURATION_H #endif // CONFIGURATION_H

View File

@ -1951,9 +1951,10 @@
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
// Servo deactivation // Only power servos during movement, otherwise leave off to prevent jitter
//
// With this option servos are powered only during movement, then turned off to prevent jitter.
//#define DEACTIVATE_SERVOS_AFTER_MOVE //#define DEACTIVATE_SERVOS_AFTER_MOVE
// Allow servo angle to be edited and saved to EEPROM
//#define EDITABLE_SERVO_ANGLES
#endif // CONFIGURATION_H #endif // CONFIGURATION_H

View File

@ -1965,9 +1965,10 @@
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
// Servo deactivation // Only power servos during movement, otherwise leave off to prevent jitter
//
// With this option servos are powered only during movement, then turned off to prevent jitter.
//#define DEACTIVATE_SERVOS_AFTER_MOVE //#define DEACTIVATE_SERVOS_AFTER_MOVE
// Allow servo angle to be edited and saved to EEPROM
//#define EDITABLE_SERVO_ANGLES
#endif // CONFIGURATION_H #endif // CONFIGURATION_H

View File

@ -1956,9 +1956,10 @@
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
// Servo deactivation // Only power servos during movement, otherwise leave off to prevent jitter
//
// With this option servos are powered only during movement, then turned off to prevent jitter.
//#define DEACTIVATE_SERVOS_AFTER_MOVE //#define DEACTIVATE_SERVOS_AFTER_MOVE
// Allow servo angle to be edited and saved to EEPROM
//#define EDITABLE_SERVO_ANGLES
#endif // CONFIGURATION_H #endif // CONFIGURATION_H

View File

@ -1950,9 +1950,10 @@
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
// Servo deactivation // Only power servos during movement, otherwise leave off to prevent jitter
//
// With this option servos are powered only during movement, then turned off to prevent jitter.
//#define DEACTIVATE_SERVOS_AFTER_MOVE //#define DEACTIVATE_SERVOS_AFTER_MOVE
// Allow servo angle to be edited and saved to EEPROM
//#define EDITABLE_SERVO_ANGLES
#endif // CONFIGURATION_H #endif // CONFIGURATION_H

View File

@ -1950,9 +1950,10 @@
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
// Servo deactivation // Only power servos during movement, otherwise leave off to prevent jitter
//
// With this option servos are powered only during movement, then turned off to prevent jitter.
//#define DEACTIVATE_SERVOS_AFTER_MOVE //#define DEACTIVATE_SERVOS_AFTER_MOVE
// Allow servo angle to be edited and saved to EEPROM
//#define EDITABLE_SERVO_ANGLES
#endif // CONFIGURATION_H #endif // CONFIGURATION_H

View File

@ -1956,9 +1956,10 @@
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
// Servo deactivation // Only power servos during movement, otherwise leave off to prevent jitter
//
// With this option servos are powered only during movement, then turned off to prevent jitter.
//#define DEACTIVATE_SERVOS_AFTER_MOVE //#define DEACTIVATE_SERVOS_AFTER_MOVE
// Allow servo angle to be edited and saved to EEPROM
//#define EDITABLE_SERVO_ANGLES
#endif // CONFIGURATION_H #endif // CONFIGURATION_H

View File

@ -1935,9 +1935,10 @@
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
// Servo deactivation // Only power servos during movement, otherwise leave off to prevent jitter
//
// With this option servos are powered only during movement, then turned off to prevent jitter.
//#define DEACTIVATE_SERVOS_AFTER_MOVE //#define DEACTIVATE_SERVOS_AFTER_MOVE
// Allow servo angle to be edited and saved to EEPROM
//#define EDITABLE_SERVO_ANGLES
#endif // CONFIGURATION_H #endif // CONFIGURATION_H

View File

@ -1928,9 +1928,10 @@
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
// Servo deactivation // Only power servos during movement, otherwise leave off to prevent jitter
//
// With this option servos are powered only during movement, then turned off to prevent jitter.
//#define DEACTIVATE_SERVOS_AFTER_MOVE //#define DEACTIVATE_SERVOS_AFTER_MOVE
// Allow servo angle to be edited and saved to EEPROM
//#define EDITABLE_SERVO_ANGLES
#endif // CONFIGURATION_H #endif // CONFIGURATION_H

View File

@ -1928,9 +1928,10 @@
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
// Servo deactivation // Only power servos during movement, otherwise leave off to prevent jitter
//
// With this option servos are powered only during movement, then turned off to prevent jitter.
//#define DEACTIVATE_SERVOS_AFTER_MOVE //#define DEACTIVATE_SERVOS_AFTER_MOVE
// Allow servo angle to be edited and saved to EEPROM
//#define EDITABLE_SERVO_ANGLES
#endif // CONFIGURATION_H #endif // CONFIGURATION_H

View File

@ -1926,9 +1926,10 @@
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 500, 500 } #define SERVO_DELAY { 500, 500 }
// Servo deactivation // Only power servos during movement, otherwise leave off to prevent jitter
//
// With this option servos are powered only during movement, then turned off to prevent jitter.
#define DEACTIVATE_SERVOS_AFTER_MOVE #define DEACTIVATE_SERVOS_AFTER_MOVE
// Allow servo angle to be edited and saved to EEPROM
//#define EDITABLE_SERVO_ANGLES
#endif // CONFIGURATION_H #endif // CONFIGURATION_H

View File

@ -1961,9 +1961,7 @@
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
// Servo deactivation // Only power servos during movement, otherwise leave off to prevent jitter
//
// With this option servos are powered only during movement, then turned off to prevent jitter.
//#define DEACTIVATE_SERVOS_AFTER_MOVE //#define DEACTIVATE_SERVOS_AFTER_MOVE
/** /**
@ -1975,4 +1973,7 @@
#define LCD_WIDTH_OVERRIDE 20 // Default is 22. For this Geeetech use 20. #define LCD_WIDTH_OVERRIDE 20 // Default is 22. For this Geeetech use 20.
#endif #endif
// Allow servo angle to be edited and saved to EEPROM
//#define EDITABLE_SERVO_ANGLES
#endif // CONFIGURATION_H #endif // CONFIGURATION_H

View File

@ -1946,9 +1946,10 @@
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
// Servo deactivation // Only power servos during movement, otherwise leave off to prevent jitter
//
// With this option servos are powered only during movement, then turned off to prevent jitter.
//#define DEACTIVATE_SERVOS_AFTER_MOVE //#define DEACTIVATE_SERVOS_AFTER_MOVE
// Allow servo angle to be edited and saved to EEPROM
//#define EDITABLE_SERVO_ANGLES
#endif // CONFIGURATION_H #endif // CONFIGURATION_H

View File

@ -1962,9 +1962,10 @@
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
// Servo deactivation // Only power servos during movement, otherwise leave off to prevent jitter
//
// With this option servos are powered only during movement, then turned off to prevent jitter.
//#define DEACTIVATE_SERVOS_AFTER_MOVE //#define DEACTIVATE_SERVOS_AFTER_MOVE
// Allow servo angle to be edited and saved to EEPROM
//#define EDITABLE_SERVO_ANGLES
#endif // CONFIGURATION_H #endif // CONFIGURATION_H

View File

@ -1961,9 +1961,10 @@
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
// Servo deactivation // Only power servos during movement, otherwise leave off to prevent jitter
//
// With this option servos are powered only during movement, then turned off to prevent jitter.
//#define DEACTIVATE_SERVOS_AFTER_MOVE //#define DEACTIVATE_SERVOS_AFTER_MOVE
// Allow servo angle to be edited and saved to EEPROM
//#define EDITABLE_SERVO_ANGLES
#endif // CONFIGURATION_H #endif // CONFIGURATION_H

View File

@ -1946,9 +1946,10 @@
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
// Servo deactivation // Only power servos during movement, otherwise leave off to prevent jitter
//
// With this option servos are powered only during movement, then turned off to prevent jitter.
//#define DEACTIVATE_SERVOS_AFTER_MOVE //#define DEACTIVATE_SERVOS_AFTER_MOVE
// Allow servo angle to be edited and saved to EEPROM
//#define EDITABLE_SERVO_ANGLES
#endif // CONFIGURATION_H #endif // CONFIGURATION_H

View File

@ -1946,9 +1946,10 @@
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
// Servo deactivation // Only power servos during movement, otherwise leave off to prevent jitter
//
// With this option servos are powered only during movement, then turned off to prevent jitter.
//#define DEACTIVATE_SERVOS_AFTER_MOVE //#define DEACTIVATE_SERVOS_AFTER_MOVE
// Allow servo angle to be edited and saved to EEPROM
//#define EDITABLE_SERVO_ANGLES
#endif // CONFIGURATION_H #endif // CONFIGURATION_H

View File

@ -1924,9 +1924,10 @@
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
// Servo deactivation // Only power servos during movement, otherwise leave off to prevent jitter
//
// With this option servos are powered only during movement, then turned off to prevent jitter.
//#define DEACTIVATE_SERVOS_AFTER_MOVE //#define DEACTIVATE_SERVOS_AFTER_MOVE
// Allow servo angle to be edited and saved to EEPROM
//#define EDITABLE_SERVO_ANGLES
#endif // CONFIGURATION_H #endif // CONFIGURATION_H

View File

@ -1957,9 +1957,10 @@
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
// Servo deactivation // Only power servos during movement, otherwise leave off to prevent jitter
//
// With this option servos are powered only during movement, then turned off to prevent jitter.
//#define DEACTIVATE_SERVOS_AFTER_MOVE //#define DEACTIVATE_SERVOS_AFTER_MOVE
// Allow servo angle to be edited and saved to EEPROM
//#define EDITABLE_SERVO_ANGLES
#endif // CONFIGURATION_H #endif // CONFIGURATION_H

View File

@ -1940,9 +1940,10 @@
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
// Servo deactivation // Only power servos during movement, otherwise leave off to prevent jitter
//
// With this option servos are powered only during movement, then turned off to prevent jitter.
//#define DEACTIVATE_SERVOS_AFTER_MOVE //#define DEACTIVATE_SERVOS_AFTER_MOVE
// Allow servo angle to be edited and saved to EEPROM
//#define EDITABLE_SERVO_ANGLES
#endif // CONFIGURATION_H #endif // CONFIGURATION_H

View File

@ -1948,9 +1948,10 @@
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
// Servo deactivation // Only power servos during movement, otherwise leave off to prevent jitter
//
// With this option servos are powered only during movement, then turned off to prevent jitter.
//#define DEACTIVATE_SERVOS_AFTER_MOVE //#define DEACTIVATE_SERVOS_AFTER_MOVE
// Allow servo angle to be edited and saved to EEPROM
//#define EDITABLE_SERVO_ANGLES
#endif // CONFIGURATION_H #endif // CONFIGURATION_H

View File

@ -1945,9 +1945,10 @@
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
// Servo deactivation // Only power servos during movement, otherwise leave off to prevent jitter
//
// With this option servos are powered only during movement, then turned off to prevent jitter.
//#define DEACTIVATE_SERVOS_AFTER_MOVE //#define DEACTIVATE_SERVOS_AFTER_MOVE
// Allow servo angle to be edited and saved to EEPROM
//#define EDITABLE_SERVO_ANGLES
#endif // CONFIGURATION_H #endif // CONFIGURATION_H

View File

@ -1950,9 +1950,10 @@
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
// Servo deactivation // Only power servos during movement, otherwise leave off to prevent jitter
//
// With this option servos are powered only during movement, then turned off to prevent jitter.
//#define DEACTIVATE_SERVOS_AFTER_MOVE //#define DEACTIVATE_SERVOS_AFTER_MOVE
// Allow servo angle to be edited and saved to EEPROM
//#define EDITABLE_SERVO_ANGLES
#endif // CONFIGURATION_H #endif // CONFIGURATION_H

View File

@ -1924,9 +1924,10 @@
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
// Servo deactivation // Only power servos during movement, otherwise leave off to prevent jitter
//
// With this option servos are powered only during movement, then turned off to prevent jitter.
//#define DEACTIVATE_SERVOS_AFTER_MOVE //#define DEACTIVATE_SERVOS_AFTER_MOVE
// Allow servo angle to be edited and saved to EEPROM
//#define EDITABLE_SERVO_ANGLES
#endif // CONFIGURATION_H #endif // CONFIGURATION_H

View File

@ -1920,9 +1920,10 @@
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
// Servo deactivation // Only power servos during movement, otherwise leave off to prevent jitter
//
// With this option servos are powered only during movement, then turned off to prevent jitter.
//#define DEACTIVATE_SERVOS_AFTER_MOVE //#define DEACTIVATE_SERVOS_AFTER_MOVE
// Allow servo angle to be edited and saved to EEPROM
//#define EDITABLE_SERVO_ANGLES
#endif // CONFIGURATION_H #endif // CONFIGURATION_H

View File

@ -1995,9 +1995,10 @@ Black rubber belt(MXL), 18 - tooth aluminium pulley : 87.489 step per mm (Huxley
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
// Servo deactivation // Only power servos during movement, otherwise leave off to prevent jitter
//
// With this option servos are powered only during movement, then turned off to prevent jitter.
//#define DEACTIVATE_SERVOS_AFTER_MOVE //#define DEACTIVATE_SERVOS_AFTER_MOVE
// Allow servo angle to be edited and saved to EEPROM
//#define EDITABLE_SERVO_ANGLES
#endif // CONFIGURATION_H #endif // CONFIGURATION_H

View File

@ -1920,9 +1920,10 @@
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
// Servo deactivation // Only power servos during movement, otherwise leave off to prevent jitter
//
// With this option servos are powered only during movement, then turned off to prevent jitter.
//#define DEACTIVATE_SERVOS_AFTER_MOVE //#define DEACTIVATE_SERVOS_AFTER_MOVE
// Allow servo angle to be edited and saved to EEPROM
//#define EDITABLE_SERVO_ANGLES
#endif // CONFIGURATION_H #endif // CONFIGURATION_H

View File

@ -1920,9 +1920,10 @@
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
// Servo deactivation // Only power servos during movement, otherwise leave off to prevent jitter
//
// With this option servos are powered only during movement, then turned off to prevent jitter.
//#define DEACTIVATE_SERVOS_AFTER_MOVE //#define DEACTIVATE_SERVOS_AFTER_MOVE
// Allow servo angle to be edited and saved to EEPROM
//#define EDITABLE_SERVO_ANGLES
#endif // CONFIGURATION_H #endif // CONFIGURATION_H

View File

@ -1933,9 +1933,10 @@
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
// Servo deactivation // Only power servos during movement, otherwise leave off to prevent jitter
//
// With this option servos are powered only during movement, then turned off to prevent jitter.
//#define DEACTIVATE_SERVOS_AFTER_MOVE //#define DEACTIVATE_SERVOS_AFTER_MOVE
// Allow servo angle to be edited and saved to EEPROM
//#define EDITABLE_SERVO_ANGLES
#endif // CONFIGURATION_H #endif // CONFIGURATION_H

View File

@ -1948,9 +1948,10 @@
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
// Servo deactivation // Only power servos during movement, otherwise leave off to prevent jitter
//
// With this option servos are powered only during movement, then turned off to prevent jitter.
//#define DEACTIVATE_SERVOS_AFTER_MOVE //#define DEACTIVATE_SERVOS_AFTER_MOVE
// Allow servo angle to be edited and saved to EEPROM
//#define EDITABLE_SERVO_ANGLES
#endif // CONFIGURATION_H #endif // CONFIGURATION_H

View File

@ -1946,9 +1946,10 @@
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
// Servo deactivation // Only power servos during movement, otherwise leave off to prevent jitter
//
// With this option servos are powered only during movement, then turned off to prevent jitter.
//#define DEACTIVATE_SERVOS_AFTER_MOVE //#define DEACTIVATE_SERVOS_AFTER_MOVE
// Allow servo angle to be edited and saved to EEPROM
//#define EDITABLE_SERVO_ANGLES
#endif // CONFIGURATION_H #endif // CONFIGURATION_H

View File

@ -1977,9 +1977,10 @@
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
// Servo deactivation // Only power servos during movement, otherwise leave off to prevent jitter
//
// With this option servos are powered only during movement, then turned off to prevent jitter.
//#define DEACTIVATE_SERVOS_AFTER_MOVE //#define DEACTIVATE_SERVOS_AFTER_MOVE
// Allow servo angle to be edited and saved to EEPROM
//#define EDITABLE_SERVO_ANGLES
#endif // CONFIGURATION_H #endif // CONFIGURATION_H

View File

@ -1920,9 +1920,10 @@
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
// Servo deactivation // Only power servos during movement, otherwise leave off to prevent jitter
//
// With this option servos are powered only during movement, then turned off to prevent jitter.
//#define DEACTIVATE_SERVOS_AFTER_MOVE //#define DEACTIVATE_SERVOS_AFTER_MOVE
// Allow servo angle to be edited and saved to EEPROM
//#define EDITABLE_SERVO_ANGLES
#endif // CONFIGURATION_H #endif // CONFIGURATION_H

View File

@ -2002,9 +2002,10 @@
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
// Servo deactivation // Only power servos during movement, otherwise leave off to prevent jitter
//
// With this option servos are powered only during movement, then turned off to prevent jitter.
//#define DEACTIVATE_SERVOS_AFTER_MOVE //#define DEACTIVATE_SERVOS_AFTER_MOVE
// Allow servo angle to be edited and saved to EEPROM
//#define EDITABLE_SERVO_ANGLES
#endif // CONFIGURATION_H #endif // CONFIGURATION_H

View File

@ -1946,9 +1946,10 @@
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
// Servo deactivation // Only power servos during movement, otherwise leave off to prevent jitter
//
// With this option servos are powered only during movement, then turned off to prevent jitter.
//#define DEACTIVATE_SERVOS_AFTER_MOVE //#define DEACTIVATE_SERVOS_AFTER_MOVE
// Allow servo angle to be edited and saved to EEPROM
//#define EDITABLE_SERVO_ANGLES
#endif // CONFIGURATION_H #endif // CONFIGURATION_H

View File

@ -1925,9 +1925,10 @@
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
// Servo deactivation // Only power servos during movement, otherwise leave off to prevent jitter
//
// With this option servos are powered only during movement, then turned off to prevent jitter.
//#define DEACTIVATE_SERVOS_AFTER_MOVE //#define DEACTIVATE_SERVOS_AFTER_MOVE
// Allow servo angle to be edited and saved to EEPROM
//#define EDITABLE_SERVO_ANGLES
#endif // CONFIGURATION_H #endif // CONFIGURATION_H

View File

@ -1920,9 +1920,10 @@
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
// Servo deactivation // Only power servos during movement, otherwise leave off to prevent jitter
//
// With this option servos are powered only during movement, then turned off to prevent jitter.
//#define DEACTIVATE_SERVOS_AFTER_MOVE //#define DEACTIVATE_SERVOS_AFTER_MOVE
// Allow servo angle to be edited and saved to EEPROM
//#define EDITABLE_SERVO_ANGLES
#endif // CONFIGURATION_H #endif // CONFIGURATION_H

View File

@ -1957,9 +1957,10 @@
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
// Servo deactivation // Only power servos during movement, otherwise leave off to prevent jitter
//
// With this option servos are powered only during movement, then turned off to prevent jitter.
//#define DEACTIVATE_SERVOS_AFTER_MOVE //#define DEACTIVATE_SERVOS_AFTER_MOVE
// Allow servo angle to be edited and saved to EEPROM
//#define EDITABLE_SERVO_ANGLES
#endif // CONFIGURATION_H #endif // CONFIGURATION_H

View File

@ -1946,9 +1946,10 @@
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
// Servo deactivation // Only power servos during movement, otherwise leave off to prevent jitter
//
// With this option servos are powered only during movement, then turned off to prevent jitter.
//#define DEACTIVATE_SERVOS_AFTER_MOVE //#define DEACTIVATE_SERVOS_AFTER_MOVE
// Allow servo angle to be edited and saved to EEPROM
//#define EDITABLE_SERVO_ANGLES
#endif // CONFIGURATION_H #endif // CONFIGURATION_H

View File

@ -1981,9 +1981,10 @@
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
// Servo deactivation // Only power servos during movement, otherwise leave off to prevent jitter
//
// With this option servos are powered only during movement, then turned off to prevent jitter.
//#define DEACTIVATE_SERVOS_AFTER_MOVE //#define DEACTIVATE_SERVOS_AFTER_MOVE
// Allow servo angle to be edited and saved to EEPROM
//#define EDITABLE_SERVO_ANGLES
#endif // CONFIGURATION_H #endif // CONFIGURATION_H

View File

@ -1921,9 +1921,10 @@
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
// Servo deactivation // Only power servos during movement, otherwise leave off to prevent jitter
//
// With this option servos are powered only during movement, then turned off to prevent jitter.
//#define DEACTIVATE_SERVOS_AFTER_MOVE //#define DEACTIVATE_SERVOS_AFTER_MOVE
// Allow servo angle to be edited and saved to EEPROM
//#define EDITABLE_SERVO_ANGLES
#endif // CONFIGURATION_H #endif // CONFIGURATION_H

View File

@ -1921,9 +1921,10 @@
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
// Servo deactivation // Only power servos during movement, otherwise leave off to prevent jitter
//
// With this option servos are powered only during movement, then turned off to prevent jitter.
//#define DEACTIVATE_SERVOS_AFTER_MOVE //#define DEACTIVATE_SERVOS_AFTER_MOVE
// Allow servo angle to be edited and saved to EEPROM
//#define EDITABLE_SERVO_ANGLES
#endif // CONFIGURATION_H #endif // CONFIGURATION_H

View File

@ -1959,9 +1959,10 @@
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
// Servo deactivation // Only power servos during movement, otherwise leave off to prevent jitter
//
// With this option servos are powered only during movement, then turned off to prevent jitter.
//#define DEACTIVATE_SERVOS_AFTER_MOVE //#define DEACTIVATE_SERVOS_AFTER_MOVE
// Allow servo angle to be edited and saved to EEPROM
//#define EDITABLE_SERVO_ANGLES
#endif // CONFIGURATION_H #endif // CONFIGURATION_H

View File

@ -1952,9 +1952,10 @@
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
// Servo deactivation // Only power servos during movement, otherwise leave off to prevent jitter
//
// With this option servos are powered only during movement, then turned off to prevent jitter.
//#define DEACTIVATE_SERVOS_AFTER_MOVE //#define DEACTIVATE_SERVOS_AFTER_MOVE
// Allow servo angle to be edited and saved to EEPROM
//#define EDITABLE_SERVO_ANGLES
#endif // CONFIGURATION_H #endif // CONFIGURATION_H

View File

@ -2056,9 +2056,10 @@
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
// Servo deactivation // Only power servos during movement, otherwise leave off to prevent jitter
//
// With this option servos are powered only during movement, then turned off to prevent jitter.
//#define DEACTIVATE_SERVOS_AFTER_MOVE //#define DEACTIVATE_SERVOS_AFTER_MOVE
// Allow servo angle to be edited and saved to EEPROM
//#define EDITABLE_SERVO_ANGLES
#endif // CONFIGURATION_H #endif // CONFIGURATION_H

View File

@ -2055,9 +2055,10 @@
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
// Servo deactivation // Only power servos during movement, otherwise leave off to prevent jitter
//
// With this option servos are powered only during movement, then turned off to prevent jitter.
//#define DEACTIVATE_SERVOS_AFTER_MOVE //#define DEACTIVATE_SERVOS_AFTER_MOVE
// Allow servo angle to be edited and saved to EEPROM
//#define EDITABLE_SERVO_ANGLES
#endif // CONFIGURATION_H #endif // CONFIGURATION_H

View File

@ -2080,9 +2080,10 @@
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
// Servo deactivation // Only power servos during movement, otherwise leave off to prevent jitter
//
// With this option servos are powered only during movement, then turned off to prevent jitter.
//#define DEACTIVATE_SERVOS_AFTER_MOVE //#define DEACTIVATE_SERVOS_AFTER_MOVE
// Allow servo angle to be edited and saved to EEPROM
//#define EDITABLE_SERVO_ANGLES
#endif // CONFIGURATION_H #endif // CONFIGURATION_H

View File

@ -2057,9 +2057,10 @@
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
// Servo deactivation // Only power servos during movement, otherwise leave off to prevent jitter
//
// With this option servos are powered only during movement, then turned off to prevent jitter.
//#define DEACTIVATE_SERVOS_AFTER_MOVE //#define DEACTIVATE_SERVOS_AFTER_MOVE
// Allow servo angle to be edited and saved to EEPROM
//#define EDITABLE_SERVO_ANGLES
#endif // CONFIGURATION_H #endif // CONFIGURATION_H

View File

@ -2042,9 +2042,10 @@
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
// Servo deactivation // Only power servos during movement, otherwise leave off to prevent jitter
//
// With this option servos are powered only during movement, then turned off to prevent jitter.
//#define DEACTIVATE_SERVOS_AFTER_MOVE //#define DEACTIVATE_SERVOS_AFTER_MOVE
// Allow servo angle to be edited and saved to EEPROM
//#define EDITABLE_SERVO_ANGLES
#endif // CONFIGURATION_H #endif // CONFIGURATION_H

View File

@ -2070,9 +2070,10 @@
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
// Servo deactivation // Only power servos during movement, otherwise leave off to prevent jitter
//
// With this option servos are powered only during movement, then turned off to prevent jitter.
//#define DEACTIVATE_SERVOS_AFTER_MOVE //#define DEACTIVATE_SERVOS_AFTER_MOVE
// Allow servo angle to be edited and saved to EEPROM
//#define EDITABLE_SERVO_ANGLES
#endif // CONFIGURATION_H #endif // CONFIGURATION_H

View File

@ -2071,9 +2071,10 @@
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
// Servo deactivation // Only power servos during movement, otherwise leave off to prevent jitter
//
// With this option servos are powered only during movement, then turned off to prevent jitter.
//#define DEACTIVATE_SERVOS_AFTER_MOVE //#define DEACTIVATE_SERVOS_AFTER_MOVE
// Allow servo angle to be edited and saved to EEPROM
//#define EDITABLE_SERVO_ANGLES
#endif // CONFIGURATION_H #endif // CONFIGURATION_H

View File

@ -2071,9 +2071,10 @@
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
// Servo deactivation // Only power servos during movement, otherwise leave off to prevent jitter
//
// With this option servos are powered only during movement, then turned off to prevent jitter.
//#define DEACTIVATE_SERVOS_AFTER_MOVE //#define DEACTIVATE_SERVOS_AFTER_MOVE
// Allow servo angle to be edited and saved to EEPROM
//#define EDITABLE_SERVO_ANGLES
#endif // CONFIGURATION_H #endif // CONFIGURATION_H

View File

@ -1960,9 +1960,10 @@
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300, 300 } #define SERVO_DELAY { 300, 300 }
// Servo deactivation // Only power servos during movement, otherwise leave off to prevent jitter
//
// With this option servos are powered only during movement, then turned off to prevent jitter.
//#define DEACTIVATE_SERVOS_AFTER_MOVE //#define DEACTIVATE_SERVOS_AFTER_MOVE
// Allow servo angle to be edited and saved to EEPROM
//#define EDITABLE_SERVO_ANGLES
#endif // CONFIGURATION_H #endif // CONFIGURATION_H

View File

@ -1949,9 +1949,10 @@
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
// Servo deactivation // Only power servos during movement, otherwise leave off to prevent jitter
//
// With this option servos are powered only during movement, then turned off to prevent jitter.
//#define DEACTIVATE_SERVOS_AFTER_MOVE //#define DEACTIVATE_SERVOS_AFTER_MOVE
// Allow servo angle to be edited and saved to EEPROM
//#define EDITABLE_SERVO_ANGLES
#endif // CONFIGURATION_H #endif // CONFIGURATION_H

View File

@ -1948,9 +1948,10 @@
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
// Servo deactivation // Only power servos during movement, otherwise leave off to prevent jitter
//
// With this option servos are powered only during movement, then turned off to prevent jitter.
//#define DEACTIVATE_SERVOS_AFTER_MOVE //#define DEACTIVATE_SERVOS_AFTER_MOVE
// Allow servo angle to be edited and saved to EEPROM
//#define EDITABLE_SERVO_ANGLES
#endif // CONFIGURATION_H #endif // CONFIGURATION_H

View File

@ -1915,9 +1915,10 @@
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
// Servo deactivation // Only power servos during movement, otherwise leave off to prevent jitter
//
// With this option servos are powered only during movement, then turned off to prevent jitter.
//#define DEACTIVATE_SERVOS_AFTER_MOVE //#define DEACTIVATE_SERVOS_AFTER_MOVE
// Allow servo angle to be edited and saved to EEPROM
//#define EDITABLE_SERVO_ANGLES
#endif // CONFIGURATION_H #endif // CONFIGURATION_H

View File

@ -1951,9 +1951,10 @@
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
// Servo deactivation // Only power servos during movement, otherwise leave off to prevent jitter
//
// With this option servos are powered only during movement, then turned off to prevent jitter.
//#define DEACTIVATE_SERVOS_AFTER_MOVE //#define DEACTIVATE_SERVOS_AFTER_MOVE
// Allow servo angle to be edited and saved to EEPROM
//#define EDITABLE_SERVO_ANGLES
#endif // CONFIGURATION_H #endif // CONFIGURATION_H