Add EDITABLE_SERVO_ANGLES to example configs

Marlin/src/config/examples/AlephObjects/TAZ4/Configuration.h

@@ -1940,9 +1940,10 @@
 // If the servo can't reach the requested position, increase it.
 #define SERVO_DELAY { 300 }
 
-// Servo deactivation
+// Only power servos during movement, otherwise leave off to prevent jitter
-//
-// With this option servos are powered only during movement, then turned off to prevent jitter.
 //#define DEACTIVATE_SERVOS_AFTER_MOVE
 
+// Allow servo angle to be edited and saved to EEPROM
+//#define EDITABLE_SERVO_ANGLES
+
 #endif // CONFIGURATION_H

Marlin/src/config/examples/AliExpress/CL-260/Configuration.h

@@ -1946,9 +1946,10 @@
 // If the servo can't reach the requested position, increase it.
 #define SERVO_DELAY { 300 }
 
-// Servo deactivation
+// Only power servos during movement, otherwise leave off to prevent jitter
-//
-// With this option servos are powered only during movement, then turned off to prevent jitter.
 //#define DEACTIVATE_SERVOS_AFTER_MOVE
 
+// Allow servo angle to be edited and saved to EEPROM
+//#define EDITABLE_SERVO_ANGLES
+
 #endif // CONFIGURATION_H

Marlin/src/config/examples/Anet/A6/Configuration.h

@@ -2101,9 +2101,10 @@
 // If the servo can't reach the requested position, increase it.
 #define SERVO_DELAY { 300 }
 
-// Servo deactivation
+// Only power servos during movement, otherwise leave off to prevent jitter
-//
-// With this option servos are powered only during movement, then turned off to prevent jitter.
 //#define DEACTIVATE_SERVOS_AFTER_MOVE
 
+// Allow servo angle to be edited and saved to EEPROM
+//#define EDITABLE_SERVO_ANGLES
+
 #endif // CONFIGURATION_H

Marlin/src/config/examples/Anet/A8/Configuration.h

@@ -1929,9 +1929,10 @@
 // If the servo can't reach the requested position, increase it.
 #define SERVO_DELAY { 300 }
 
-// Servo deactivation
+// Only power servos during movement, otherwise leave off to prevent jitter
-//
-// With this option servos are powered only during movement, then turned off to prevent jitter.
 //#define DEACTIVATE_SERVOS_AFTER_MOVE
 
+// Allow servo angle to be edited and saved to EEPROM
+//#define EDITABLE_SERVO_ANGLES
+
 #endif // CONFIGURATION_H

Marlin/src/config/examples/Azteeg/X5GT/Configuration.h

@@ -1966,9 +1966,10 @@
 // If the servo can't reach the requested position, increase it.
 #define SERVO_DELAY { 300 }
 
-// Servo deactivation
+// Only power servos during movement, otherwise leave off to prevent jitter
-//
-// With this option servos are powered only during movement, then turned off to prevent jitter.
 //#define DEACTIVATE_SERVOS_AFTER_MOVE
 
+// Allow servo angle to be edited and saved to EEPROM
+//#define EDITABLE_SERVO_ANGLES
+
 #endif // CONFIGURATION_H

Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration.h

@@ -1920,9 +1920,10 @@
 // If the servo can't reach the requested position, increase it.
 #define SERVO_DELAY { 300 }
 
-// Servo deactivation
+// Only power servos during movement, otherwise leave off to prevent jitter
-//
-// With this option servos are powered only during movement, then turned off to prevent jitter.
 //#define DEACTIVATE_SERVOS_AFTER_MOVE
 
+// Allow servo angle to be edited and saved to EEPROM
+//#define EDITABLE_SERVO_ANGLES
+
 #endif // CONFIGURATION_H

Marlin/src/config/examples/BIBO/TouchX/default/Configuration.h

@@ -1920,9 +1920,10 @@
 // If the servo can't reach the requested position, increase it.
 #define SERVO_DELAY { 300 }
 
-// Servo deactivation
+// Only power servos during movement, otherwise leave off to prevent jitter
-//
-// With this option servos are powered only during movement, then turned off to prevent jitter.
 //#define DEACTIVATE_SERVOS_AFTER_MOVE
 
+// Allow servo angle to be edited and saved to EEPROM
+//#define EDITABLE_SERVO_ANGLES
+
 #endif // CONFIGURATION_H

Marlin/src/config/examples/BQ/Hephestos/Configuration.h

@@ -1908,9 +1908,10 @@
 // If the servo can't reach the requested position, increase it.
 #define SERVO_DELAY { 300 }
 
-// Servo deactivation
+// Only power servos during movement, otherwise leave off to prevent jitter
-//
-// With this option servos are powered only during movement, then turned off to prevent jitter.
 //#define DEACTIVATE_SERVOS_AFTER_MOVE
 
+// Allow servo angle to be edited and saved to EEPROM
+//#define EDITABLE_SERVO_ANGLES
+
 #endif // CONFIGURATION_H

Marlin/src/config/examples/BQ/Hephestos_2/Configuration.h

@@ -1946,9 +1946,10 @@
 // If the servo can't reach the requested position, increase it.
 #define SERVO_DELAY { 300 }
 
-// Servo deactivation
+// Only power servos during movement, otherwise leave off to prevent jitter
-//
-// With this option servos are powered only during movement, then turned off to prevent jitter.
 //#define DEACTIVATE_SERVOS_AFTER_MOVE
 
+// Allow servo angle to be edited and saved to EEPROM
+//#define EDITABLE_SERVO_ANGLES
+
 #endif // CONFIGURATION_H

Marlin/src/config/examples/BQ/WITBOX/Configuration.h

@@ -1908,9 +1908,10 @@
 // If the servo can't reach the requested position, increase it.
 #define SERVO_DELAY { 300 }
 
-// Servo deactivation
+// Only power servos during movement, otherwise leave off to prevent jitter
-//
-// With this option servos are powered only during movement, then turned off to prevent jitter.
 //#define DEACTIVATE_SERVOS_AFTER_MOVE
 
+// Allow servo angle to be edited and saved to EEPROM
+//#define EDITABLE_SERVO_ANGLES
+
 #endif // CONFIGURATION_H

Marlin/src/config/examples/Cartesio/Configuration.h

@@ -1919,9 +1919,10 @@
 // If the servo can't reach the requested position, increase it.
 #define SERVO_DELAY { 300 }
 
-// Servo deactivation
+// Only power servos during movement, otherwise leave off to prevent jitter
-//
-// With this option servos are powered only during movement, then turned off to prevent jitter.
 //#define DEACTIVATE_SERVOS_AFTER_MOVE
 
+// Allow servo angle to be edited and saved to EEPROM
+//#define EDITABLE_SERVO_ANGLES
+
 #endif // CONFIGURATION_H

Marlin/src/config/examples/Creality/CR-10/Configuration.h

@@ -1956,9 +1956,10 @@
 // If the servo can't reach the requested position, increase it.
 #define SERVO_DELAY { 300 }
 
-// Servo deactivation
+// Only power servos during movement, otherwise leave off to prevent jitter
-//
-// With this option servos are powered only during movement, then turned off to prevent jitter.
 //#define DEACTIVATE_SERVOS_AFTER_MOVE
 
+// Allow servo angle to be edited and saved to EEPROM
+//#define EDITABLE_SERVO_ANGLES
+
 #endif // CONFIGURATION_H

Marlin/src/config/examples/Creality/CR-10S/Configuration.h

@@ -1951,9 +1951,10 @@
 // If the servo can't reach the requested position, increase it.
 #define SERVO_DELAY { 300 }
 
-// Servo deactivation
+// Only power servos during movement, otherwise leave off to prevent jitter
-//
-// With this option servos are powered only during movement, then turned off to prevent jitter.
 //#define DEACTIVATE_SERVOS_AFTER_MOVE
 
+// Allow servo angle to be edited and saved to EEPROM
+//#define EDITABLE_SERVO_ANGLES
+
 #endif // CONFIGURATION_H

Marlin/src/config/examples/Creality/CR-10mini/Configuration.h

@@ -1965,9 +1965,10 @@
 // If the servo can't reach the requested position, increase it.
 #define SERVO_DELAY { 300 }
 
-// Servo deactivation
+// Only power servos during movement, otherwise leave off to prevent jitter
-//
-// With this option servos are powered only during movement, then turned off to prevent jitter.
 //#define DEACTIVATE_SERVOS_AFTER_MOVE
 
+// Allow servo angle to be edited and saved to EEPROM
+//#define EDITABLE_SERVO_ANGLES
+
 #endif // CONFIGURATION_H

Marlin/src/config/examples/Creality/CR-8/Configuration.h

@@ -1956,9 +1956,10 @@
 // If the servo can't reach the requested position, increase it.
 #define SERVO_DELAY { 300 }
 
-// Servo deactivation
+// Only power servos during movement, otherwise leave off to prevent jitter
-//
-// With this option servos are powered only during movement, then turned off to prevent jitter.
 //#define DEACTIVATE_SERVOS_AFTER_MOVE
 
+// Allow servo angle to be edited and saved to EEPROM
+//#define EDITABLE_SERVO_ANGLES
+
 #endif // CONFIGURATION_H

Marlin/src/config/examples/Creality/Ender-2/Configuration.h

@@ -1950,9 +1950,10 @@
 // If the servo can't reach the requested position, increase it.
 #define SERVO_DELAY { 300 }
 
-// Servo deactivation
+// Only power servos during movement, otherwise leave off to prevent jitter
-//
-// With this option servos are powered only during movement, then turned off to prevent jitter.
 //#define DEACTIVATE_SERVOS_AFTER_MOVE
 
+// Allow servo angle to be edited and saved to EEPROM
+//#define EDITABLE_SERVO_ANGLES
+
 #endif // CONFIGURATION_H

Marlin/src/config/examples/Creality/Ender-3/Configuration.h

@@ -1950,9 +1950,10 @@
 // If the servo can't reach the requested position, increase it.
 #define SERVO_DELAY { 300 }
 
-// Servo deactivation
+// Only power servos during movement, otherwise leave off to prevent jitter
-//
-// With this option servos are powered only during movement, then turned off to prevent jitter.
 //#define DEACTIVATE_SERVOS_AFTER_MOVE
 
+// Allow servo angle to be edited and saved to EEPROM
+//#define EDITABLE_SERVO_ANGLES
+
 #endif // CONFIGURATION_H

Marlin/src/config/examples/Creality/Ender-4/Configuration.h

@@ -1956,9 +1956,10 @@
 // If the servo can't reach the requested position, increase it.
 #define SERVO_DELAY { 300 }
 
-// Servo deactivation
+// Only power servos during movement, otherwise leave off to prevent jitter
-//
-// With this option servos are powered only during movement, then turned off to prevent jitter.
 //#define DEACTIVATE_SERVOS_AFTER_MOVE
 
+// Allow servo angle to be edited and saved to EEPROM
+//#define EDITABLE_SERVO_ANGLES
+
 #endif // CONFIGURATION_H

Marlin/src/config/examples/Einstart-S/Configuration.h

@@ -1935,9 +1935,10 @@
 // If the servo can't reach the requested position, increase it.
 #define SERVO_DELAY { 300 }
 
-// Servo deactivation
+// Only power servos during movement, otherwise leave off to prevent jitter
-//
-// With this option servos are powered only during movement, then turned off to prevent jitter.
 //#define DEACTIVATE_SERVOS_AFTER_MOVE
 
+// Allow servo angle to be edited and saved to EEPROM
+//#define EDITABLE_SERVO_ANGLES
+
 #endif // CONFIGURATION_H

Marlin/src/config/examples/Felix/Configuration.h

@@ -1928,9 +1928,10 @@
 // If the servo can't reach the requested position, increase it.
 #define SERVO_DELAY { 300 }
 
-// Servo deactivation
+// Only power servos during movement, otherwise leave off to prevent jitter
-//
-// With this option servos are powered only during movement, then turned off to prevent jitter.
 //#define DEACTIVATE_SERVOS_AFTER_MOVE
 
+// Allow servo angle to be edited and saved to EEPROM
+//#define EDITABLE_SERVO_ANGLES
+
 #endif // CONFIGURATION_H

Marlin/src/config/examples/Felix/DUAL/Configuration.h

@@ -1928,9 +1928,10 @@
 // If the servo can't reach the requested position, increase it.
 #define SERVO_DELAY { 300 }
 
-// Servo deactivation
+// Only power servos during movement, otherwise leave off to prevent jitter
-//
-// With this option servos are powered only during movement, then turned off to prevent jitter.
 //#define DEACTIVATE_SERVOS_AFTER_MOVE
 
+// Allow servo angle to be edited and saved to EEPROM
+//#define EDITABLE_SERVO_ANGLES
+
 #endif // CONFIGURATION_H

Marlin/src/config/examples/FolgerTech/i3-2020/Configuration.h

@@ -1926,9 +1926,10 @@
 // If the servo can't reach the requested position, increase it.
 #define SERVO_DELAY { 500, 500 }
 
-// Servo deactivation
+// Only power servos during movement, otherwise leave off to prevent jitter
-//
-// With this option servos are powered only during movement, then turned off to prevent jitter.
 #define DEACTIVATE_SERVOS_AFTER_MOVE
 
+// Allow servo angle to be edited and saved to EEPROM
+//#define EDITABLE_SERVO_ANGLES
+
 #endif // CONFIGURATION_H

Marlin/src/config/examples/Geeetech/GT2560/Configuration.h

@@ -1961,9 +1961,7 @@
 // If the servo can't reach the requested position, increase it.
 #define SERVO_DELAY { 300 }
 
-// Servo deactivation
+// Only power servos during movement, otherwise leave off to prevent jitter
-//
-// With this option servos are powered only during movement, then turned off to prevent jitter.
 //#define DEACTIVATE_SERVOS_AFTER_MOVE
 
 /**
@@ -1975,4 +1973,7 @@
   #define LCD_WIDTH_OVERRIDE 20 // Default is 22. For this Geeetech use 20.
 #endif
 
+// Allow servo angle to be edited and saved to EEPROM
+//#define EDITABLE_SERVO_ANGLES
+
 #endif // CONFIGURATION_H

Marlin/src/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h

@@ -1946,9 +1946,10 @@
 // If the servo can't reach the requested position, increase it.
 #define SERVO_DELAY { 300 }
 
-// Servo deactivation
+// Only power servos during movement, otherwise leave off to prevent jitter
-//
-// With this option servos are powered only during movement, then turned off to prevent jitter.
 //#define DEACTIVATE_SERVOS_AFTER_MOVE
 
+// Allow servo angle to be edited and saved to EEPROM
+//#define EDITABLE_SERVO_ANGLES
+
 #endif // CONFIGURATION_H

Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h

@@ -1962,9 +1962,10 @@
 // If the servo can't reach the requested position, increase it.
 #define SERVO_DELAY { 300 }
 
-// Servo deactivation
+// Only power servos during movement, otherwise leave off to prevent jitter
-//
-// With this option servos are powered only during movement, then turned off to prevent jitter.
 //#define DEACTIVATE_SERVOS_AFTER_MOVE
 
+// Allow servo angle to be edited and saved to EEPROM
+//#define EDITABLE_SERVO_ANGLES
+
 #endif // CONFIGURATION_H

Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h

@@ -1961,9 +1961,10 @@
 // If the servo can't reach the requested position, increase it.
 #define SERVO_DELAY { 300 }
 
-// Servo deactivation
+// Only power servos during movement, otherwise leave off to prevent jitter
-//
-// With this option servos are powered only during movement, then turned off to prevent jitter.
 //#define DEACTIVATE_SERVOS_AFTER_MOVE
 
+// Allow servo angle to be edited and saved to EEPROM
+//#define EDITABLE_SERVO_ANGLES
+
 #endif // CONFIGURATION_H

Marlin/src/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h

@@ -1946,9 +1946,10 @@
 // If the servo can't reach the requested position, increase it.
 #define SERVO_DELAY { 300 }
 
-// Servo deactivation
+// Only power servos during movement, otherwise leave off to prevent jitter
-//
-// With this option servos are powered only during movement, then turned off to prevent jitter.
 //#define DEACTIVATE_SERVOS_AFTER_MOVE
 
+// Allow servo angle to be edited and saved to EEPROM
+//#define EDITABLE_SERVO_ANGLES
+
 #endif // CONFIGURATION_H

Marlin/src/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h

@@ -1946,9 +1946,10 @@
 // If the servo can't reach the requested position, increase it.
 #define SERVO_DELAY { 300 }
 
-// Servo deactivation
+// Only power servos during movement, otherwise leave off to prevent jitter
-//
-// With this option servos are powered only during movement, then turned off to prevent jitter.
 //#define DEACTIVATE_SERVOS_AFTER_MOVE
 
+// Allow servo angle to be edited and saved to EEPROM
+//#define EDITABLE_SERVO_ANGLES
+
 #endif // CONFIGURATION_H

Marlin/src/config/examples/Infitary/i3-M508/Configuration.h

@@ -1924,9 +1924,10 @@
 // If the servo can't reach the requested position, increase it.
 #define SERVO_DELAY { 300 }
 
-// Servo deactivation
+// Only power servos during movement, otherwise leave off to prevent jitter
-//
-// With this option servos are powered only during movement, then turned off to prevent jitter.
 //#define DEACTIVATE_SERVOS_AFTER_MOVE
 
+// Allow servo angle to be edited and saved to EEPROM
+//#define EDITABLE_SERVO_ANGLES
+
 #endif // CONFIGURATION_H

Marlin/src/config/examples/JGAurora/A5/Configuration.h

@@ -1957,9 +1957,10 @@
 // If the servo can't reach the requested position, increase it.
 #define SERVO_DELAY { 300 }
 
-// Servo deactivation
+// Only power servos during movement, otherwise leave off to prevent jitter
-//
-// With this option servos are powered only during movement, then turned off to prevent jitter.
 //#define DEACTIVATE_SERVOS_AFTER_MOVE
 
+// Allow servo angle to be edited and saved to EEPROM
+//#define EDITABLE_SERVO_ANGLES
+
 #endif // CONFIGURATION_H

Marlin/src/config/examples/MakerParts/Configuration.h

@@ -1940,9 +1940,10 @@
 // If the servo can't reach the requested position, increase it.
 #define SERVO_DELAY { 300 }
 
-// Servo deactivation
+// Only power servos during movement, otherwise leave off to prevent jitter
-//
-// With this option servos are powered only during movement, then turned off to prevent jitter.
 //#define DEACTIVATE_SERVOS_AFTER_MOVE
 
+// Allow servo angle to be edited and saved to EEPROM
+//#define EDITABLE_SERVO_ANGLES
+
 #endif // CONFIGURATION_H

Marlin/src/config/examples/Malyan/M150/Configuration.h

@@ -1948,9 +1948,10 @@
 // If the servo can't reach the requested position, increase it.
 #define SERVO_DELAY { 300 }
 
-// Servo deactivation
+// Only power servos during movement, otherwise leave off to prevent jitter
-//
-// With this option servos are powered only during movement, then turned off to prevent jitter.
 //#define DEACTIVATE_SERVOS_AFTER_MOVE
 
+// Allow servo angle to be edited and saved to EEPROM
+//#define EDITABLE_SERVO_ANGLES
+
 #endif // CONFIGURATION_H

Marlin/src/config/examples/Malyan/M200/Configuration.h

@@ -1945,9 +1945,10 @@
 // If the servo can't reach the requested position, increase it.
 #define SERVO_DELAY { 300 }
 
-// Servo deactivation
+// Only power servos during movement, otherwise leave off to prevent jitter
-//
-// With this option servos are powered only during movement, then turned off to prevent jitter.
 //#define DEACTIVATE_SERVOS_AFTER_MOVE
 
+// Allow servo angle to be edited and saved to EEPROM
+//#define EDITABLE_SERVO_ANGLES
+
 #endif // CONFIGURATION_H

Marlin/src/config/examples/Micromake/C1/basic/Configuration.h

@@ -1950,9 +1950,10 @@
 // If the servo can't reach the requested position, increase it.
 #define SERVO_DELAY { 300 }
 
-// Servo deactivation
+// Only power servos during movement, otherwise leave off to prevent jitter
-//
-// With this option servos are powered only during movement, then turned off to prevent jitter.
 //#define DEACTIVATE_SERVOS_AFTER_MOVE
 
+// Allow servo angle to be edited and saved to EEPROM
+//#define EDITABLE_SERVO_ANGLES
+
 #endif // CONFIGURATION_H

Marlin/src/config/examples/Micromake/C1/enhanced/Configuration.h

@@ -1924,9 +1924,10 @@
 // If the servo can't reach the requested position, increase it.
 #define SERVO_DELAY { 300 }
 
-// Servo deactivation
+// Only power servos during movement, otherwise leave off to prevent jitter
-//
-// With this option servos are powered only during movement, then turned off to prevent jitter.
 //#define DEACTIVATE_SERVOS_AFTER_MOVE
 
+// Allow servo angle to be edited and saved to EEPROM
+//#define EDITABLE_SERVO_ANGLES
+
 #endif // CONFIGURATION_H

Marlin/src/config/examples/Mks/Sbase/Configuration.h

@@ -1920,9 +1920,10 @@
 // If the servo can't reach the requested position, increase it.
 #define SERVO_DELAY { 300 }
 
-// Servo deactivation
+// Only power servos during movement, otherwise leave off to prevent jitter
-//
-// With this option servos are powered only during movement, then turned off to prevent jitter.
 //#define DEACTIVATE_SERVOS_AFTER_MOVE
 
+// Allow servo angle to be edited and saved to EEPROM
+//#define EDITABLE_SERVO_ANGLES
+
 #endif // CONFIGURATION_H

Marlin/src/config/examples/RepRapPro/Huxley/Configuration.h

@@ -1995,9 +1995,10 @@ Black rubber belt(MXL), 18 - tooth aluminium pulley : 87.489 step per mm (Huxley
 // If the servo can't reach the requested position, increase it.
 #define SERVO_DELAY { 300 }
 
-// Servo deactivation
+// Only power servos during movement, otherwise leave off to prevent jitter
-//
-// With this option servos are powered only during movement, then turned off to prevent jitter.
 //#define DEACTIVATE_SERVOS_AFTER_MOVE
 
+// Allow servo angle to be edited and saved to EEPROM
+//#define EDITABLE_SERVO_ANGLES
+
 #endif // CONFIGURATION_H

Marlin/src/config/examples/RepRapWorld/Megatronics/Configuration.h

@@ -1920,9 +1920,10 @@
 // If the servo can't reach the requested position, increase it.
 #define SERVO_DELAY { 300 }
 
-// Servo deactivation
+// Only power servos during movement, otherwise leave off to prevent jitter
-//
-// With this option servos are powered only during movement, then turned off to prevent jitter.
 //#define DEACTIVATE_SERVOS_AFTER_MOVE
 
+// Allow servo angle to be edited and saved to EEPROM
+//#define EDITABLE_SERVO_ANGLES
+
 #endif // CONFIGURATION_H

Marlin/src/config/examples/RigidBot/Configuration.h

@@ -1920,9 +1920,10 @@
 // If the servo can't reach the requested position, increase it.
 #define SERVO_DELAY { 300 }
 
-// Servo deactivation
+// Only power servos during movement, otherwise leave off to prevent jitter
-//
-// With this option servos are powered only during movement, then turned off to prevent jitter.
 //#define DEACTIVATE_SERVOS_AFTER_MOVE
 
+// Allow servo angle to be edited and saved to EEPROM
+//#define EDITABLE_SERVO_ANGLES
+
 #endif // CONFIGURATION_H

Marlin/src/config/examples/SCARA/Configuration.h

@@ -1933,9 +1933,10 @@
 // If the servo can't reach the requested position, increase it.
 #define SERVO_DELAY { 300 }
 
-// Servo deactivation
+// Only power servos during movement, otherwise leave off to prevent jitter
-//
-// With this option servos are powered only during movement, then turned off to prevent jitter.
 //#define DEACTIVATE_SERVOS_AFTER_MOVE
 
+// Allow servo angle to be edited and saved to EEPROM
+//#define EDITABLE_SERVO_ANGLES
+
 #endif // CONFIGURATION_H

Marlin/src/config/examples/STM32F10/Configuration.h

@@ -1948,9 +1948,10 @@
 // If the servo can't reach the requested position, increase it.
 #define SERVO_DELAY { 300 }
 
-// Servo deactivation
+// Only power servos during movement, otherwise leave off to prevent jitter
-//
-// With this option servos are powered only during movement, then turned off to prevent jitter.
 //#define DEACTIVATE_SERVOS_AFTER_MOVE
 
+// Allow servo angle to be edited and saved to EEPROM
+//#define EDITABLE_SERVO_ANGLES
+
 #endif // CONFIGURATION_H

Marlin/src/config/examples/STM32F4/Configuration.h

@@ -1946,9 +1946,10 @@
 // If the servo can't reach the requested position, increase it.
 #define SERVO_DELAY { 300 }
 
-// Servo deactivation
+// Only power servos during movement, otherwise leave off to prevent jitter
-//
-// With this option servos are powered only during movement, then turned off to prevent jitter.
 //#define DEACTIVATE_SERVOS_AFTER_MOVE
 
+// Allow servo angle to be edited and saved to EEPROM
+//#define EDITABLE_SERVO_ANGLES
+
 #endif // CONFIGURATION_H

Marlin/src/config/examples/Sanguinololu/Configuration.h

@@ -1977,9 +1977,10 @@
 // If the servo can't reach the requested position, increase it.
 #define SERVO_DELAY { 300 }
 
-// Servo deactivation
+// Only power servos during movement, otherwise leave off to prevent jitter
-//
-// With this option servos are powered only during movement, then turned off to prevent jitter.
 //#define DEACTIVATE_SERVOS_AFTER_MOVE
 
+// Allow servo angle to be edited and saved to EEPROM
+//#define EDITABLE_SERVO_ANGLES
+
 #endif // CONFIGURATION_H

Marlin/src/config/examples/TheBorg/Configuration.h

@@ -1920,9 +1920,10 @@
 // If the servo can't reach the requested position, increase it.
 #define SERVO_DELAY { 300 }
 
-// Servo deactivation
+// Only power servos during movement, otherwise leave off to prevent jitter
-//
-// With this option servos are powered only during movement, then turned off to prevent jitter.
 //#define DEACTIVATE_SERVOS_AFTER_MOVE
 
+// Allow servo angle to be edited and saved to EEPROM
+//#define EDITABLE_SERVO_ANGLES
+
 #endif // CONFIGURATION_H

Marlin/src/config/examples/TinyBoy2/Configuration.h

@@ -2002,9 +2002,10 @@
 // If the servo can't reach the requested position, increase it.
 #define SERVO_DELAY { 300 }
 
-// Servo deactivation
+// Only power servos during movement, otherwise leave off to prevent jitter
-//
-// With this option servos are powered only during movement, then turned off to prevent jitter.
 //#define DEACTIVATE_SERVOS_AFTER_MOVE
 
+// Allow servo angle to be edited and saved to EEPROM
+//#define EDITABLE_SERVO_ANGLES
+
 #endif // CONFIGURATION_H

Marlin/src/config/examples/Tronxy/X1/Configuration.h

@@ -1946,9 +1946,10 @@
 // If the servo can't reach the requested position, increase it.
 #define SERVO_DELAY { 300 }
 
-// Servo deactivation
+// Only power servos during movement, otherwise leave off to prevent jitter
-//
-// With this option servos are powered only during movement, then turned off to prevent jitter.
 //#define DEACTIVATE_SERVOS_AFTER_MOVE
 
+// Allow servo angle to be edited and saved to EEPROM
+//#define EDITABLE_SERVO_ANGLES
+
 #endif // CONFIGURATION_H

Marlin/src/config/examples/Tronxy/X3A/Configuration.h

@@ -1925,9 +1925,10 @@
 // If the servo can't reach the requested position, increase it.
 #define SERVO_DELAY { 300 }
 
-// Servo deactivation
+// Only power servos during movement, otherwise leave off to prevent jitter
-//
-// With this option servos are powered only during movement, then turned off to prevent jitter.
 //#define DEACTIVATE_SERVOS_AFTER_MOVE
 
+// Allow servo angle to be edited and saved to EEPROM
+//#define EDITABLE_SERVO_ANGLES
+
 #endif // CONFIGURATION_H

Marlin/src/config/examples/Tronxy/X5S/Configuration.h

@@ -1920,9 +1920,10 @@
 // If the servo can't reach the requested position, increase it.
 #define SERVO_DELAY { 300 }
 
-// Servo deactivation
+// Only power servos during movement, otherwise leave off to prevent jitter
-//
-// With this option servos are powered only during movement, then turned off to prevent jitter.
 //#define DEACTIVATE_SERVOS_AFTER_MOVE
 
+// Allow servo angle to be edited and saved to EEPROM
+//#define EDITABLE_SERVO_ANGLES
+
 #endif // CONFIGURATION_H

Marlin/src/config/examples/Tronxy/XY100/Configuration.h

@@ -1957,9 +1957,10 @@
 // If the servo can't reach the requested position, increase it.
 #define SERVO_DELAY { 300 }
 
-// Servo deactivation
+// Only power servos during movement, otherwise leave off to prevent jitter
-//
-// With this option servos are powered only during movement, then turned off to prevent jitter.
 //#define DEACTIVATE_SERVOS_AFTER_MOVE
 
+// Allow servo angle to be edited and saved to EEPROM
+//#define EDITABLE_SERVO_ANGLES
+
 #endif // CONFIGURATION_H

Marlin/src/config/examples/UltiMachine/Archim2/Configuration.h

@@ -1946,9 +1946,10 @@
 // If the servo can't reach the requested position, increase it.
 #define SERVO_DELAY { 300 }
 
-// Servo deactivation
+// Only power servos during movement, otherwise leave off to prevent jitter
-//
-// With this option servos are powered only during movement, then turned off to prevent jitter.
 //#define DEACTIVATE_SERVOS_AFTER_MOVE
 
+// Allow servo angle to be edited and saved to EEPROM
+//#define EDITABLE_SERVO_ANGLES
+
 #endif // CONFIGURATION_H

Marlin/src/config/examples/Velleman/K8200/Configuration.h

@@ -1981,9 +1981,10 @@
 // If the servo can't reach the requested position, increase it.
 #define SERVO_DELAY { 300 }
 
-// Servo deactivation
+// Only power servos during movement, otherwise leave off to prevent jitter
-//
-// With this option servos are powered only during movement, then turned off to prevent jitter.
 //#define DEACTIVATE_SERVOS_AFTER_MOVE
 
+// Allow servo angle to be edited and saved to EEPROM
+//#define EDITABLE_SERVO_ANGLES
+
 #endif // CONFIGURATION_H

Marlin/src/config/examples/Velleman/K8400/Configuration.h

@@ -1921,9 +1921,10 @@
 // If the servo can't reach the requested position, increase it.
 #define SERVO_DELAY { 300 }
 
-// Servo deactivation
+// Only power servos during movement, otherwise leave off to prevent jitter
-//
-// With this option servos are powered only during movement, then turned off to prevent jitter.
 //#define DEACTIVATE_SERVOS_AFTER_MOVE
 
+// Allow servo angle to be edited and saved to EEPROM
+//#define EDITABLE_SERVO_ANGLES
+
 #endif // CONFIGURATION_H

Marlin/src/config/examples/Velleman/K8400/Dual-head/Configuration.h

@@ -1921,9 +1921,10 @@
 // If the servo can't reach the requested position, increase it.
 #define SERVO_DELAY { 300 }
 
-// Servo deactivation
+// Only power servos during movement, otherwise leave off to prevent jitter
-//
-// With this option servos are powered only during movement, then turned off to prevent jitter.
 //#define DEACTIVATE_SERVOS_AFTER_MOVE
 
+// Allow servo angle to be edited and saved to EEPROM
+//#define EDITABLE_SERVO_ANGLES
+
 #endif // CONFIGURATION_H

Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration.h

@@ -1959,9 +1959,10 @@
 // If the servo can't reach the requested position, increase it.
 #define SERVO_DELAY { 300 }
 
-// Servo deactivation
+// Only power servos during movement, otherwise leave off to prevent jitter
-//
-// With this option servos are powered only during movement, then turned off to prevent jitter.
 //#define DEACTIVATE_SERVOS_AFTER_MOVE
 
+// Allow servo angle to be edited and saved to EEPROM
+//#define EDITABLE_SERVO_ANGLES
+
 #endif // CONFIGURATION_H

Marlin/src/config/examples/adafruit/ST7565/Configuration.h

@@ -1952,9 +1952,10 @@
 // If the servo can't reach the requested position, increase it.
 #define SERVO_DELAY { 300 }
 
-// Servo deactivation
+// Only power servos during movement, otherwise leave off to prevent jitter
-//
-// With this option servos are powered only during movement, then turned off to prevent jitter.
 //#define DEACTIVATE_SERVOS_AFTER_MOVE
 
+// Allow servo angle to be edited and saved to EEPROM
+//#define EDITABLE_SERVO_ANGLES
+
 #endif // CONFIGURATION_H

Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration.h

@@ -2056,9 +2056,10 @@
 // If the servo can't reach the requested position, increase it.
 #define SERVO_DELAY { 300 }
 
-// Servo deactivation
+// Only power servos during movement, otherwise leave off to prevent jitter
-//
-// With this option servos are powered only during movement, then turned off to prevent jitter.
 //#define DEACTIVATE_SERVOS_AFTER_MOVE
 
+// Allow servo angle to be edited and saved to EEPROM
+//#define EDITABLE_SERVO_ANGLES
+
 #endif // CONFIGURATION_H

Marlin/src/config/examples/delta/FLSUN/kossel/Configuration.h

@@ -2055,9 +2055,10 @@
 // If the servo can't reach the requested position, increase it.
 #define SERVO_DELAY { 300 }
 
-// Servo deactivation
+// Only power servos during movement, otherwise leave off to prevent jitter
-//
-// With this option servos are powered only during movement, then turned off to prevent jitter.
 //#define DEACTIVATE_SERVOS_AFTER_MOVE
 
+// Allow servo angle to be edited and saved to EEPROM
+//#define EDITABLE_SERVO_ANGLES
+
 #endif // CONFIGURATION_H

Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration.h

@@ -2080,9 +2080,10 @@
 // If the servo can't reach the requested position, increase it.
 #define SERVO_DELAY { 300 }
 
-// Servo deactivation
+// Only power servos during movement, otherwise leave off to prevent jitter
-//
-// With this option servos are powered only during movement, then turned off to prevent jitter.
 //#define DEACTIVATE_SERVOS_AFTER_MOVE
 
+// Allow servo angle to be edited and saved to EEPROM
+//#define EDITABLE_SERVO_ANGLES
+
 #endif // CONFIGURATION_H

Marlin/src/config/examples/delta/Hatchbox_Alpha/Configuration.h

@@ -2057,9 +2057,10 @@
 // If the servo can't reach the requested position, increase it.
 #define SERVO_DELAY { 300 }
 
-// Servo deactivation
+// Only power servos during movement, otherwise leave off to prevent jitter
-//
-// With this option servos are powered only during movement, then turned off to prevent jitter.
 //#define DEACTIVATE_SERVOS_AFTER_MOVE
 
+// Allow servo angle to be edited and saved to EEPROM
+//#define EDITABLE_SERVO_ANGLES
+
 #endif // CONFIGURATION_H

Marlin/src/config/examples/delta/generic/Configuration.h

@@ -2042,9 +2042,10 @@
 // If the servo can't reach the requested position, increase it.
 #define SERVO_DELAY { 300 }
 
-// Servo deactivation
+// Only power servos during movement, otherwise leave off to prevent jitter
-//
-// With this option servos are powered only during movement, then turned off to prevent jitter.
 //#define DEACTIVATE_SERVOS_AFTER_MOVE
 
+// Allow servo angle to be edited and saved to EEPROM
+//#define EDITABLE_SERVO_ANGLES
+
 #endif // CONFIGURATION_H

Marlin/src/config/examples/delta/kossel_mini/Configuration.h

@@ -2070,9 +2070,10 @@
 // If the servo can't reach the requested position, increase it.
 #define SERVO_DELAY { 300 }
 
-// Servo deactivation
+// Only power servos during movement, otherwise leave off to prevent jitter
-//
-// With this option servos are powered only during movement, then turned off to prevent jitter.
 //#define DEACTIVATE_SERVOS_AFTER_MOVE
 
+// Allow servo angle to be edited and saved to EEPROM
+//#define EDITABLE_SERVO_ANGLES
+
 #endif // CONFIGURATION_H

Marlin/src/config/examples/delta/kossel_pro/Configuration.h

@@ -2071,9 +2071,10 @@
 // If the servo can't reach the requested position, increase it.
 #define SERVO_DELAY { 300 }
 
-// Servo deactivation
+// Only power servos during movement, otherwise leave off to prevent jitter
-//
-// With this option servos are powered only during movement, then turned off to prevent jitter.
 //#define DEACTIVATE_SERVOS_AFTER_MOVE
 
+// Allow servo angle to be edited and saved to EEPROM
+//#define EDITABLE_SERVO_ANGLES
+
 #endif // CONFIGURATION_H

Marlin/src/config/examples/delta/kossel_xl/Configuration.h

@@ -2071,9 +2071,10 @@
 // If the servo can't reach the requested position, increase it.
 #define SERVO_DELAY { 300 }
 
-// Servo deactivation
+// Only power servos during movement, otherwise leave off to prevent jitter
-//
-// With this option servos are powered only during movement, then turned off to prevent jitter.
 //#define DEACTIVATE_SERVOS_AFTER_MOVE
 
+// Allow servo angle to be edited and saved to EEPROM
+//#define EDITABLE_SERVO_ANGLES
+
 #endif // CONFIGURATION_H

Marlin/src/config/examples/gCreate/gMax1.5+/Configuration.h

@@ -1960,9 +1960,10 @@
 // If the servo can't reach the requested position, increase it.
 #define SERVO_DELAY { 300, 300 }
 
-// Servo deactivation
+// Only power servos during movement, otherwise leave off to prevent jitter
-//
-// With this option servos are powered only during movement, then turned off to prevent jitter.
 //#define DEACTIVATE_SERVOS_AFTER_MOVE
 
+// Allow servo angle to be edited and saved to EEPROM
+//#define EDITABLE_SERVO_ANGLES
+
 #endif // CONFIGURATION_H

Marlin/src/config/examples/makibox/Configuration.h

@@ -1949,9 +1949,10 @@
 // If the servo can't reach the requested position, increase it.
 #define SERVO_DELAY { 300 }
 
-// Servo deactivation
+// Only power servos during movement, otherwise leave off to prevent jitter
-//
-// With this option servos are powered only during movement, then turned off to prevent jitter.
 //#define DEACTIVATE_SERVOS_AFTER_MOVE
 
+// Allow servo angle to be edited and saved to EEPROM
+//#define EDITABLE_SERVO_ANGLES
+
 #endif // CONFIGURATION_H

Marlin/src/config/examples/stm32f103ret6/Configuration.h

@@ -1948,9 +1948,10 @@
 // If the servo can't reach the requested position, increase it.
 #define SERVO_DELAY { 300 }
 
-// Servo deactivation
+// Only power servos during movement, otherwise leave off to prevent jitter
-//
-// With this option servos are powered only during movement, then turned off to prevent jitter.
 //#define DEACTIVATE_SERVOS_AFTER_MOVE
 
+// Allow servo angle to be edited and saved to EEPROM
+//#define EDITABLE_SERVO_ANGLES
+
 #endif // CONFIGURATION_H

Marlin/src/config/examples/tvrrug/Round2/Configuration.h

@@ -1915,9 +1915,10 @@
 // If the servo can't reach the requested position, increase it.
 #define SERVO_DELAY { 300 }
 
-// Servo deactivation
+// Only power servos during movement, otherwise leave off to prevent jitter
-//
-// With this option servos are powered only during movement, then turned off to prevent jitter.
 //#define DEACTIVATE_SERVOS_AFTER_MOVE
 
+// Allow servo angle to be edited and saved to EEPROM
+//#define EDITABLE_SERVO_ANGLES
+
 #endif // CONFIGURATION_H

Marlin/src/config/examples/wt150/Configuration.h

@@ -1951,9 +1951,10 @@
 // If the servo can't reach the requested position, increase it.
 #define SERVO_DELAY { 300 }
 
-// Servo deactivation
+// Only power servos during movement, otherwise leave off to prevent jitter
-//
-// With this option servos are powered only during movement, then turned off to prevent jitter.
 //#define DEACTIVATE_SERVOS_AFTER_MOVE
 
+// Allow servo angle to be edited and saved to EEPROM
+//#define EDITABLE_SERVO_ANGLES
+
 #endif // CONFIGURATION_H