Improve temperature runaway, idle timeout (#19339)

Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
This commit is contained in:
ellensp 2020-09-14 16:58:39 +12:00 committed by GitHub
parent cf8316bfbb
commit 979876e958
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
33 changed files with 153 additions and 201 deletions

View File

@ -484,7 +484,7 @@ void wait_for_confirmation(const bool is_reload/*=false*/, const int8_t max_beep
// Start the heater idle timers // Start the heater idle timers
const millis_t nozzle_timeout = SEC_TO_MS(PAUSE_PARK_NOZZLE_TIMEOUT); const millis_t nozzle_timeout = SEC_TO_MS(PAUSE_PARK_NOZZLE_TIMEOUT);
HOTEND_LOOP() thermalManager.hotend_idle[e].start(nozzle_timeout); HOTEND_LOOP() thermalManager.heater_idle[e].start(nozzle_timeout);
#if ENABLED(DUAL_X_CARRIAGE) #if ENABLED(DUAL_X_CARRIAGE)
const int8_t saved_ext = active_extruder; const int8_t saved_ext = active_extruder;
@ -503,7 +503,7 @@ void wait_for_confirmation(const bool is_reload/*=false*/, const int8_t max_beep
// If the nozzle has timed out... // If the nozzle has timed out...
if (!nozzle_timed_out) if (!nozzle_timed_out)
HOTEND_LOOP() nozzle_timed_out |= thermalManager.hotend_idle[e].timed_out; HOTEND_LOOP() nozzle_timed_out |= thermalManager.heater_idle[e].timed_out;
// Wait for the user to press the button to re-heat the nozzle, then // Wait for the user to press the button to re-heat the nozzle, then
// re-heat the nozzle, re-show the continue prompt, restart idle timers, start over // re-heat the nozzle, re-show the continue prompt, restart idle timers, start over
@ -533,7 +533,7 @@ void wait_for_confirmation(const bool is_reload/*=false*/, const int8_t max_beep
// Start the heater idle timers // Start the heater idle timers
const millis_t nozzle_timeout = SEC_TO_MS(PAUSE_PARK_NOZZLE_TIMEOUT); const millis_t nozzle_timeout = SEC_TO_MS(PAUSE_PARK_NOZZLE_TIMEOUT);
HOTEND_LOOP() thermalManager.hotend_idle[e].start(nozzle_timeout); HOTEND_LOOP() thermalManager.heater_idle[e].start(nozzle_timeout);
TERN_(HOST_PROMPT_SUPPORT, host_prompt_do(PROMPT_USER_CONTINUE, PSTR("Reheat Done"), CONTINUE_STR)); TERN_(HOST_PROMPT_SUPPORT, host_prompt_do(PROMPT_USER_CONTINUE, PSTR("Reheat Done"), CONTINUE_STR));
TERN_(EXTENSIBLE_UI, ExtUI::onUserConfirmRequired_P(PSTR("Reheat finished."))); TERN_(EXTENSIBLE_UI, ExtUI::onUserConfirmRequired_P(PSTR("Reheat finished.")));
wait_for_user = true; wait_for_user = true;
@ -588,7 +588,7 @@ void resume_print(const float &slow_load_length/*=0*/, const float &fast_load_le
// Re-enable the heaters if they timed out // Re-enable the heaters if they timed out
bool nozzle_timed_out = false; bool nozzle_timed_out = false;
HOTEND_LOOP() { HOTEND_LOOP() {
nozzle_timed_out |= thermalManager.hotend_idle[e].timed_out; nozzle_timed_out |= thermalManager.heater_idle[e].timed_out;
thermalManager.reset_hotend_idle_timer(e); thermalManager.reset_hotend_idle_timer(e);
} }

View File

@ -56,6 +56,15 @@
#undef SHOW_TEMP_ADC_VALUES #undef SHOW_TEMP_ADC_VALUES
#endif #endif
#if TEMP_SENSOR_BED == 0
#undef THERMAL_PROTECTION_BED
#undef THERMAL_PROTECTION_BED_PERIOD
#endif
#if TEMP_SENSOR_CHAMBER == 0
#undef THERMAL_PROTECTION_CHAMBER
#endif
#if ENABLED(MIXING_EXTRUDER) && (ENABLED(RETRACT_SYNC_MIXING) || BOTH(FILAMENT_LOAD_UNLOAD_GCODES, FILAMENT_UNLOAD_ALL_EXTRUDERS)) #if ENABLED(MIXING_EXTRUDER) && (ENABLED(RETRACT_SYNC_MIXING) || BOTH(FILAMENT_LOAD_UNLOAD_GCODES, FILAMENT_UNLOAD_ALL_EXTRUDERS))
#define HAS_MIXER_SYNC_CHANNEL 1 #define HAS_MIXER_SYNC_CHANNEL 1
#endif #endif

View File

@ -521,7 +521,7 @@ FORCE_INLINE void _draw_axis_value(const AxisEnum axis, const char *value, const
FORCE_INLINE void _draw_heater_status(const heater_id_t heater_id, const char prefix, const bool blink) { FORCE_INLINE void _draw_heater_status(const heater_id_t heater_id, const char prefix, const bool blink) {
#if HAS_HEATED_BED #if HAS_HEATED_BED
const bool isBed = heater_id < 0; const bool isBed = TERN(HAS_HEATED_CHAMBER, heater_id == H_BED, heater_id < 0);
const float t1 = (isBed ? thermalManager.degBed() : thermalManager.degHotend(heater_id)), const float t1 = (isBed ? thermalManager.degBed() : thermalManager.degHotend(heater_id)),
t2 = (isBed ? thermalManager.degTargetBed() : thermalManager.degTargetHotend(heater_id)); t2 = (isBed ? thermalManager.degTargetBed() : thermalManager.degTargetHotend(heater_id));
#else #else
@ -536,14 +536,7 @@ FORCE_INLINE void _draw_heater_status(const heater_id_t heater_id, const char pr
#if !HEATER_IDLE_HANDLER #if !HEATER_IDLE_HANDLER
UNUSED(blink); UNUSED(blink);
#else #else
const bool is_idle = ( if (!blink && thermalManager.heater_idle[thermalManager.idle_index_for_id(heater_id)].timed_out) {
#if HAS_HEATED_BED
isBed ? thermalManager.bed_idle.timed_out :
#endif
thermalManager.hotend_idle[heater_id].timed_out
);
if (!blink && is_idle) {
lcd_put_wchar(' '); lcd_put_wchar(' ');
if (t2 >= 10) lcd_put_wchar(' '); if (t2 >= 10) lcd_put_wchar(' ');
if (t2 >= 100) lcd_put_wchar(' '); if (t2 >= 100) lcd_put_wchar(' ');
@ -560,27 +553,14 @@ FORCE_INLINE void _draw_heater_status(const heater_id_t heater_id, const char pr
} }
FORCE_INLINE void _draw_bed_status(const bool blink) { FORCE_INLINE void _draw_bed_status(const bool blink) {
_draw_heater_status(H_BED, ( _draw_heater_status(H_BED, TERN0(HAS_LEVELING, blink && planner.leveling_active) ? '_' : LCD_STR_BEDTEMP[0], blink);
#if HAS_LEVELING
planner.leveling_active && blink ? '_' :
#endif
LCD_STR_BEDTEMP[0]
),
blink
);
} }
#if HAS_PRINT_PROGRESS #if HAS_PRINT_PROGRESS
FORCE_INLINE void _draw_print_progress() { FORCE_INLINE void _draw_print_progress() {
const uint8_t progress = ui.get_progress_percent(); const uint8_t progress = ui.get_progress_percent();
lcd_put_u8str_P(PSTR( lcd_put_u8str_P(PSTR(TERN(SDSUPPORT, "SD", "P:")));
#if ENABLED(SDSUPPORT)
"SD"
#elif ENABLED(LCD_SET_PROGRESS_MANUALLY)
"P:"
#endif
));
if (progress) if (progress)
lcd_put_u8str(ui8tostr3rj(progress)); lcd_put_u8str(ui8tostr3rj(progress));
else else

View File

@ -254,7 +254,7 @@ FORCE_INLINE void _draw_centered_temp(const int16_t temp, const uint8_t tx, cons
if (PAGE_UNDER(7)) { if (PAGE_UNDER(7)) {
#if HEATER_IDLE_HANDLER #if HEATER_IDLE_HANDLER
const bool dodraw = (blink || !thermalManager.hotend_idle[heater_id].timed_out); const bool dodraw = (blink || !thermalManager.heater_idle[heater_id].timed_out);
#else #else
constexpr bool dodraw = true; constexpr bool dodraw = true;
#endif #endif
@ -327,7 +327,7 @@ FORCE_INLINE void _draw_centered_temp(const int16_t temp, const uint8_t tx, cons
if (PAGE_UNDER(7)) { if (PAGE_UNDER(7)) {
#if HEATER_IDLE_HANDLER #if HEATER_IDLE_HANDLER
const bool dodraw = (blink || !thermalManager.bed_idle.timed_out); const bool dodraw = (blink || !thermalManager.heater_idle[thermalManager.IDLE_INDEX_BED].timed_out);
#else #else
constexpr bool dodraw = true; constexpr bool dodraw = true;
#endif #endif

View File

@ -308,7 +308,7 @@ void MarlinUI::clear_lcd() { } // Automatically cleared by Picture Loop
lcd_put_u8str(i16tostr3rj(thermalManager.degHotend(extruder))); lcd_put_u8str(i16tostr3rj(thermalManager.degHotend(extruder)));
lcd_put_wchar('/'); lcd_put_wchar('/');
if (get_blink() || !thermalManager.hotend_idle[extruder].timed_out) if (get_blink() || !thermalManager.heater_idle[extruder].timed_out)
lcd_put_u8str(i16tostr3rj(thermalManager.degTargetHotend(extruder))); lcd_put_u8str(i16tostr3rj(thermalManager.degTargetHotend(extruder)));
} }

View File

@ -223,7 +223,7 @@ namespace ExtUI {
bool isHeaterIdle(const extruder_t extruder) { bool isHeaterIdle(const extruder_t extruder) {
#if HAS_HOTEND && HEATER_IDLE_HANDLER #if HAS_HOTEND && HEATER_IDLE_HANDLER
return thermalManager.hotend_idle[extruder - E0].timed_out; return thermalManager.heater_idle[extruder - E0].timed_out;
#else #else
UNUSED(extruder); UNUSED(extruder);
return false; return false;
@ -233,10 +233,10 @@ namespace ExtUI {
bool isHeaterIdle(const heater_t heater) { bool isHeaterIdle(const heater_t heater) {
#if HEATER_IDLE_HANDLER #if HEATER_IDLE_HANDLER
switch (heater) { switch (heater) {
TERN_(HAS_HEATED_BED, case BED: return thermalManager.bed_idle.timed_out); TERN_(HAS_HEATED_BED, case BED: return thermalManager.heater_idle[thermalManager.IDLE_INDEX_BED].timed_out);
TERN_(HAS_HEATED_CHAMBER, case CHAMBER: return false); // Chamber has no idle timer TERN_(HAS_HEATED_CHAMBER, case CHAMBER: return false); // Chamber has no idle timer
default: default:
return TERN0(HAS_HOTEND, thermalManager.hotend_idle[heater - H0].timed_out); return TERN0(HAS_HOTEND, thermalManager.heater_idle[heater - H0].timed_out);
} }
#else #else
UNUSED(heater); UNUSED(heater);

View File

@ -410,10 +410,6 @@ namespace Language_cz {
PROGMEM Language_Str MSG_THERMAL_RUNAWAY_CHAMBER = _UxGT("TEPL. ÚNIK KOMORA"); PROGMEM Language_Str MSG_THERMAL_RUNAWAY_CHAMBER = _UxGT("TEPL. ÚNIK KOMORA");
PROGMEM Language_Str MSG_ERR_MAXTEMP = _UxGT("VYSOKÁ TEPLOTA"); PROGMEM Language_Str MSG_ERR_MAXTEMP = _UxGT("VYSOKÁ TEPLOTA");
PROGMEM Language_Str MSG_ERR_MINTEMP = _UxGT("NÍZKA TEPLOTA"); PROGMEM Language_Str MSG_ERR_MINTEMP = _UxGT("NÍZKA TEPLOTA");
PROGMEM Language_Str MSG_ERR_MAXTEMP_BED = _UxGT("VYS. TEPL. PODL.");
PROGMEM Language_Str MSG_ERR_MINTEMP_BED = _UxGT("NÍZ. TEPL. PODL.");
PROGMEM Language_Str MSG_ERR_MAXTEMP_CHAMBER = _UxGT("Err: MAXTEMP KOMORA");
PROGMEM Language_Str MSG_ERR_MINTEMP_CHAMBER = _UxGT("Err: MINTEMP KOMORA");
PROGMEM Language_Str MSG_HALTED = _UxGT("TISK. ZASTAVENA"); PROGMEM Language_Str MSG_HALTED = _UxGT("TISK. ZASTAVENA");
PROGMEM Language_Str MSG_PLEASE_RESET = _UxGT("Proveďte reset"); PROGMEM Language_Str MSG_PLEASE_RESET = _UxGT("Proveďte reset");
PROGMEM Language_Str MSG_SHORT_DAY = _UxGT("d"); PROGMEM Language_Str MSG_SHORT_DAY = _UxGT("d");

View File

@ -142,8 +142,6 @@ namespace Language_da {
PROGMEM Language_Str MSG_THERMAL_RUNAWAY = _UxGT("Temp løber løbsk"); PROGMEM Language_Str MSG_THERMAL_RUNAWAY = _UxGT("Temp løber løbsk");
PROGMEM Language_Str MSG_ERR_MAXTEMP = _UxGT("Fejl: Maks temp"); PROGMEM Language_Str MSG_ERR_MAXTEMP = _UxGT("Fejl: Maks temp");
PROGMEM Language_Str MSG_ERR_MINTEMP = _UxGT("Fejl: Min temp"); PROGMEM Language_Str MSG_ERR_MINTEMP = _UxGT("Fejl: Min temp");
PROGMEM Language_Str MSG_ERR_MAXTEMP_BED = _UxGT("Fejl: Maks Plade temp");
PROGMEM Language_Str MSG_ERR_MINTEMP_BED = _UxGT("Fejl: Min Plade temp");
PROGMEM Language_Str MSG_HALTED = _UxGT("PRINTER STOPPET"); PROGMEM Language_Str MSG_HALTED = _UxGT("PRINTER STOPPET");
PROGMEM Language_Str MSG_PLEASE_RESET = _UxGT("Reset Venligst"); PROGMEM Language_Str MSG_PLEASE_RESET = _UxGT("Reset Venligst");
PROGMEM Language_Str MSG_SHORT_DAY = _UxGT("d"); // Kun et bogstav PROGMEM Language_Str MSG_SHORT_DAY = _UxGT("d"); // Kun et bogstav

View File

@ -452,10 +452,6 @@ namespace Language_de {
PROGMEM Language_Str MSG_THERMAL_RUNAWAY_CHAMBER = _UxGT("GEH.") " " LCD_STR_THERMOMETER _UxGT(" NICHT ERREICHT"); PROGMEM Language_Str MSG_THERMAL_RUNAWAY_CHAMBER = _UxGT("GEH.") " " LCD_STR_THERMOMETER _UxGT(" NICHT ERREICHT");
PROGMEM Language_Str MSG_ERR_MAXTEMP = " " LCD_STR_THERMOMETER _UxGT(" ÜBERSCHRITTEN"); PROGMEM Language_Str MSG_ERR_MAXTEMP = " " LCD_STR_THERMOMETER _UxGT(" ÜBERSCHRITTEN");
PROGMEM Language_Str MSG_ERR_MINTEMP = " " LCD_STR_THERMOMETER _UxGT(" UNTERSCHRITTEN"); PROGMEM Language_Str MSG_ERR_MINTEMP = " " LCD_STR_THERMOMETER _UxGT(" UNTERSCHRITTEN");
PROGMEM Language_Str MSG_ERR_MAXTEMP_BED = _UxGT("BETT ") LCD_STR_THERMOMETER _UxGT(" ÜBERSCHRITTEN");
PROGMEM Language_Str MSG_ERR_MINTEMP_BED = _UxGT("BETT ") LCD_STR_THERMOMETER _UxGT(" UNTERSCHRITTEN");
PROGMEM Language_Str MSG_ERR_MAXTEMP_CHAMBER = _UxGT("Err:Gehäuse max Temp");
PROGMEM Language_Str MSG_ERR_MINTEMP_CHAMBER = _UxGT("Err:Gehäuse min Temp");
PROGMEM Language_Str MSG_HALTED = _UxGT("DRUCKER GESTOPPT"); PROGMEM Language_Str MSG_HALTED = _UxGT("DRUCKER GESTOPPT");
PROGMEM Language_Str MSG_PLEASE_RESET = _UxGT("Bitte neustarten"); PROGMEM Language_Str MSG_PLEASE_RESET = _UxGT("Bitte neustarten");
PROGMEM Language_Str MSG_SHORT_DAY = _UxGT("t"); // One character only PROGMEM Language_Str MSG_SHORT_DAY = _UxGT("t"); // One character only

View File

@ -180,8 +180,6 @@ namespace Language_el {
PROGMEM Language_Str MSG_THERMAL_RUNAWAY = _UxGT("ΔΙΑΦΥΓΗ ΘΕΡΜΟΚΡΑΣΙΑΣ"); PROGMEM Language_Str MSG_THERMAL_RUNAWAY = _UxGT("ΔΙΑΦΥΓΗ ΘΕΡΜΟΚΡΑΣΙΑΣ");
PROGMEM Language_Str MSG_ERR_MAXTEMP = _UxGT("ΠΕΡΙΤΗ ΘΕΡΜΟΚΡΑΣΙΑ"); PROGMEM Language_Str MSG_ERR_MAXTEMP = _UxGT("ΠΕΡΙΤΗ ΘΕΡΜΟΚΡΑΣΙΑ");
PROGMEM Language_Str MSG_ERR_MINTEMP = _UxGT("ΜΗ ΕΠΑΡΚΗΣ ΘΕΡΜΟΚΡΑΣΙΑΣ"); //SHORTEN PROGMEM Language_Str MSG_ERR_MINTEMP = _UxGT("ΜΗ ΕΠΑΡΚΗΣ ΘΕΡΜΟΚΡΑΣΙΑΣ"); //SHORTEN
PROGMEM Language_Str MSG_ERR_MAXTEMP_BED = _UxGT("ΜΕΓΙΣΤΗ ΘΕΡΜΟΚΡΑΣΙΑΣ ΕΠ. ΕΚΤΥΠΩΣΗΣ"); //SHORTEN
PROGMEM Language_Str MSG_ERR_MINTEMP_BED = _UxGT("ΕΛΑΧΙΣΤΗ ΘΕΡΜΟΚΡΑΣΙΑΣ ΕΠ. ΕΚΤΥΠΩΣΗΣ"); //SHORTEN
PROGMEM Language_Str MSG_HALTED = _UxGT("H εκτύπωση διακόπηκε"); PROGMEM Language_Str MSG_HALTED = _UxGT("H εκτύπωση διακόπηκε");
PROGMEM Language_Str MSG_HEATING = _UxGT("Θερμαίνεται…"); PROGMEM Language_Str MSG_HEATING = _UxGT("Θερμαίνεται…");
PROGMEM Language_Str MSG_BED_HEATING = _UxGT("Θέρμανση ΕΠ. Εκτύπωσης"); //SHORTEN PROGMEM Language_Str MSG_BED_HEATING = _UxGT("Θέρμανση ΕΠ. Εκτύπωσης"); //SHORTEN

View File

@ -182,8 +182,6 @@ namespace Language_el_gr {
PROGMEM Language_Str MSG_THERMAL_RUNAWAY = _UxGT("ΔΙΑΦΥΓΗ ΘΕΡΜΟΤΗΤΑΣ"); PROGMEM Language_Str MSG_THERMAL_RUNAWAY = _UxGT("ΔΙΑΦΥΓΗ ΘΕΡΜΟΤΗΤΑΣ");
PROGMEM Language_Str MSG_ERR_MAXTEMP = _UxGT("Λάθος: ΜΕΓΙΣΤΗ ΘΕΡΜΟΤΗΤΑ"); PROGMEM Language_Str MSG_ERR_MAXTEMP = _UxGT("Λάθος: ΜΕΓΙΣΤΗ ΘΕΡΜΟΤΗΤΑ");
PROGMEM Language_Str MSG_ERR_MINTEMP = _UxGT("Λάθος: ΕΛΑΧΙΣΤΗ ΘΕΡΜΟΤΗΤΑ"); PROGMEM Language_Str MSG_ERR_MINTEMP = _UxGT("Λάθος: ΕΛΑΧΙΣΤΗ ΘΕΡΜΟΤΗΤΑ");
PROGMEM Language_Str MSG_ERR_MAXTEMP_BED = _UxGT("Λάθος: ΜΕΓΙΣΤΗ ΘΕΡΜΟΤΗΤΑ ΚΛΙΝΗΣ");
PROGMEM Language_Str MSG_ERR_MINTEMP_BED = _UxGT("Λάθος: ΕΛΑΧΙΣΤΗ ΘΕΡΜΟΤΗΤΑ ΚΛΙΝΗΣ");
PROGMEM Language_Str MSG_HEATING = _UxGT("Θερμαίνεται…"); PROGMEM Language_Str MSG_HEATING = _UxGT("Θερμαίνεται…");
PROGMEM Language_Str MSG_BED_HEATING = _UxGT("Θέρμανση κλίνης…"); PROGMEM Language_Str MSG_BED_HEATING = _UxGT("Θέρμανση κλίνης…");
PROGMEM Language_Str MSG_DELTA_CALIBRATE = _UxGT("Βαθμονόμηση Delta"); PROGMEM Language_Str MSG_DELTA_CALIBRATE = _UxGT("Βαθμονόμηση Delta");

View File

@ -457,10 +457,6 @@ namespace Language_en {
PROGMEM Language_Str MSG_THERMAL_RUNAWAY_CHAMBER = _UxGT("CHAMBER T. RUNAWAY"); PROGMEM Language_Str MSG_THERMAL_RUNAWAY_CHAMBER = _UxGT("CHAMBER T. RUNAWAY");
PROGMEM Language_Str MSG_ERR_MAXTEMP = _UxGT("Err: MAXTEMP"); PROGMEM Language_Str MSG_ERR_MAXTEMP = _UxGT("Err: MAXTEMP");
PROGMEM Language_Str MSG_ERR_MINTEMP = _UxGT("Err: MINTEMP"); PROGMEM Language_Str MSG_ERR_MINTEMP = _UxGT("Err: MINTEMP");
PROGMEM Language_Str MSG_ERR_MAXTEMP_BED = _UxGT("Err: MAXTEMP BED");
PROGMEM Language_Str MSG_ERR_MINTEMP_BED = _UxGT("Err: MINTEMP BED");
PROGMEM Language_Str MSG_ERR_MAXTEMP_CHAMBER = _UxGT("Err: MAXTEMP CHAMBER");
PROGMEM Language_Str MSG_ERR_MINTEMP_CHAMBER = _UxGT("Err: MINTEMP CHAMBER");
PROGMEM Language_Str MSG_HALTED = _UxGT("PRINTER HALTED"); PROGMEM Language_Str MSG_HALTED = _UxGT("PRINTER HALTED");
PROGMEM Language_Str MSG_PLEASE_RESET = _UxGT("Please Reset"); PROGMEM Language_Str MSG_PLEASE_RESET = _UxGT("Please Reset");
PROGMEM Language_Str MSG_SHORT_DAY = _UxGT("d"); // One character only PROGMEM Language_Str MSG_SHORT_DAY = _UxGT("d"); // One character only

View File

@ -421,10 +421,6 @@ namespace Language_es {
PROGMEM Language_Str MSG_THERMAL_RUNAWAY_CHAMBER = _UxGT("FUGA TÉRMICA CAMARA"); PROGMEM Language_Str MSG_THERMAL_RUNAWAY_CHAMBER = _UxGT("FUGA TÉRMICA CAMARA");
PROGMEM Language_Str MSG_ERR_MAXTEMP = _UxGT("Err:TEMP. MÁX"); PROGMEM Language_Str MSG_ERR_MAXTEMP = _UxGT("Err:TEMP. MÁX");
PROGMEM Language_Str MSG_ERR_MINTEMP = _UxGT("Err:TEMP. MIN"); PROGMEM Language_Str MSG_ERR_MINTEMP = _UxGT("Err:TEMP. MIN");
PROGMEM Language_Str MSG_ERR_MAXTEMP_BED = _UxGT("Err:TEMP. MÁX CAMA");
PROGMEM Language_Str MSG_ERR_MINTEMP_BED = _UxGT("Err:TEMP. MIN CAMA");
PROGMEM Language_Str MSG_ERR_MAXTEMP_CHAMBER = _UxGT("Err:TEMP. MÁX CÁMARA");
PROGMEM Language_Str MSG_ERR_MINTEMP_CHAMBER = _UxGT("Err:TEMP. MIN CÁMARA");
PROGMEM Language_Str MSG_HALTED = _UxGT("IMPRESORA DETENIDA"); PROGMEM Language_Str MSG_HALTED = _UxGT("IMPRESORA DETENIDA");
PROGMEM Language_Str MSG_PLEASE_RESET = _UxGT("Por favor, reinicie"); PROGMEM Language_Str MSG_PLEASE_RESET = _UxGT("Por favor, reinicie");
PROGMEM Language_Str MSG_SHORT_DAY = _UxGT("d"); // One character only PROGMEM Language_Str MSG_SHORT_DAY = _UxGT("d"); // One character only

View File

@ -244,8 +244,6 @@ namespace Language_eu {
PROGMEM Language_Str MSG_THERMAL_RUNAWAY = _UxGT("TENP. KONTROL EZA"); PROGMEM Language_Str MSG_THERMAL_RUNAWAY = _UxGT("TENP. KONTROL EZA");
PROGMEM Language_Str MSG_ERR_MAXTEMP = _UxGT("Err: Tenp Maximoa"); PROGMEM Language_Str MSG_ERR_MAXTEMP = _UxGT("Err: Tenp Maximoa");
PROGMEM Language_Str MSG_ERR_MINTEMP = _UxGT("Err: Tenp Minimoa"); PROGMEM Language_Str MSG_ERR_MINTEMP = _UxGT("Err: Tenp Minimoa");
PROGMEM Language_Str MSG_ERR_MAXTEMP_BED = _UxGT("Err: Ohe Tenp Max");
PROGMEM Language_Str MSG_ERR_MINTEMP_BED = _UxGT("Err: Ohe Tenp Min");
PROGMEM Language_Str MSG_HALTED = _UxGT("INPRIMA. GELDIRIK"); PROGMEM Language_Str MSG_HALTED = _UxGT("INPRIMA. GELDIRIK");
PROGMEM Language_Str MSG_PLEASE_RESET = _UxGT("Berrabia. Mesedez"); PROGMEM Language_Str MSG_PLEASE_RESET = _UxGT("Berrabia. Mesedez");
PROGMEM Language_Str MSG_SHORT_DAY = _UxGT("d"); // One character only PROGMEM Language_Str MSG_SHORT_DAY = _UxGT("d"); // One character only

View File

@ -443,10 +443,6 @@ namespace Language_gl {
PROGMEM Language_Str MSG_THERMAL_RUNAWAY_CHAMBER = _UxGT("FUGA TÉRMICA CÁMARA"); PROGMEM Language_Str MSG_THERMAL_RUNAWAY_CHAMBER = _UxGT("FUGA TÉRMICA CÁMARA");
PROGMEM Language_Str MSG_ERR_MAXTEMP = _UxGT("Erro:TEMP MÁX"); PROGMEM Language_Str MSG_ERR_MAXTEMP = _UxGT("Erro:TEMP MÁX");
PROGMEM Language_Str MSG_ERR_MINTEMP = _UxGT("Erro:TEMP MÍN"); PROGMEM Language_Str MSG_ERR_MINTEMP = _UxGT("Erro:TEMP MÍN");
PROGMEM Language_Str MSG_ERR_MAXTEMP_BED = _UxGT("Erro:TEMP MÁX CAMA");
PROGMEM Language_Str MSG_ERR_MINTEMP_BED = _UxGT("Erro:TEMP MÍN CAMA");
PROGMEM Language_Str MSG_ERR_MAXTEMP_CHAMBER = _UxGT("Erro:TEMP MÁX CÁMARA");
PROGMEM Language_Str MSG_ERR_MINTEMP_CHAMBER = _UxGT("Erro:TEMP MÍN CÁMARA");
PROGMEM Language_Str MSG_HALTED = _UxGT("IMPRESORA DETIDA"); PROGMEM Language_Str MSG_HALTED = _UxGT("IMPRESORA DETIDA");
PROGMEM Language_Str MSG_PLEASE_RESET = _UxGT("Debe reiniciar!"); PROGMEM Language_Str MSG_PLEASE_RESET = _UxGT("Debe reiniciar!");
PROGMEM Language_Str MSG_SHORT_DAY = _UxGT("d"); // One character only PROGMEM Language_Str MSG_SHORT_DAY = _UxGT("d"); // One character only

View File

@ -445,10 +445,6 @@ namespace Language_hu {
PROGMEM Language_Str MSG_THERMAL_RUNAWAY_CHAMBER = _UxGT("KAMRA FÜTÉS KIMARADÁS"); PROGMEM Language_Str MSG_THERMAL_RUNAWAY_CHAMBER = _UxGT("KAMRA FÜTÉS KIMARADÁS");
PROGMEM Language_Str MSG_ERR_MAXTEMP = _UxGT("Hiba: MAX Höfok"); PROGMEM Language_Str MSG_ERR_MAXTEMP = _UxGT("Hiba: MAX Höfok");
PROGMEM Language_Str MSG_ERR_MINTEMP = _UxGT("Hiba: MIN Höfok"); PROGMEM Language_Str MSG_ERR_MINTEMP = _UxGT("Hiba: MIN Höfok");
PROGMEM Language_Str MSG_ERR_MAXTEMP_BED = _UxGT("Hiba: MAX ÁGY HÖFOK");
PROGMEM Language_Str MSG_ERR_MINTEMP_BED = _UxGT("Hiba: MIN ÁGY HÖFOK");
PROGMEM Language_Str MSG_ERR_MAXTEMP_CHAMBER = _UxGT("Hiba: MAX KAMRA HÖFOK");
PROGMEM Language_Str MSG_ERR_MINTEMP_CHAMBER = _UxGT("Hiba: MIN KAMRA HÖFOK");
PROGMEM Language_Str MSG_HALTED = _UxGT("A NYOMTATÓ LEFAGYOTT"); PROGMEM Language_Str MSG_HALTED = _UxGT("A NYOMTATÓ LEFAGYOTT");
PROGMEM Language_Str MSG_PLEASE_RESET = _UxGT("Indítsd újra!"); PROGMEM Language_Str MSG_PLEASE_RESET = _UxGT("Indítsd újra!");
PROGMEM Language_Str MSG_SHORT_DAY = _UxGT("n"); // Csak egy karakter PROGMEM Language_Str MSG_SHORT_DAY = _UxGT("n"); // Csak egy karakter

View File

@ -457,10 +457,6 @@ namespace Language_it {
PROGMEM Language_Str MSG_THERMAL_RUNAWAY_CHAMBER = _UxGT("T.CAMERA FUORI CTRL"); PROGMEM Language_Str MSG_THERMAL_RUNAWAY_CHAMBER = _UxGT("T.CAMERA FUORI CTRL");
PROGMEM Language_Str MSG_ERR_MAXTEMP = _UxGT("Err: TEMP MASSIMA"); PROGMEM Language_Str MSG_ERR_MAXTEMP = _UxGT("Err: TEMP MASSIMA");
PROGMEM Language_Str MSG_ERR_MINTEMP = _UxGT("Err: TEMP MINIMA"); PROGMEM Language_Str MSG_ERR_MINTEMP = _UxGT("Err: TEMP MINIMA");
PROGMEM Language_Str MSG_ERR_MAXTEMP_BED = _UxGT("Err: TEMP MAX PIATTO");
PROGMEM Language_Str MSG_ERR_MINTEMP_BED = _UxGT("Err: TEMP MIN PIATTO");
PROGMEM Language_Str MSG_ERR_MAXTEMP_CHAMBER = _UxGT("Err: TEMP MAX CAMERA");
PROGMEM Language_Str MSG_ERR_MINTEMP_CHAMBER = _UxGT("Err: TEMP MIN CAMERA");
PROGMEM Language_Str MSG_HALTED = _UxGT("STAMPANTE FERMATA"); PROGMEM Language_Str MSG_HALTED = _UxGT("STAMPANTE FERMATA");
PROGMEM Language_Str MSG_PLEASE_RESET = _UxGT("Riavviare prego"); PROGMEM Language_Str MSG_PLEASE_RESET = _UxGT("Riavviare prego");
PROGMEM Language_Str MSG_SHORT_DAY = _UxGT("g"); // Un solo carattere PROGMEM Language_Str MSG_SHORT_DAY = _UxGT("g"); // Un solo carattere

View File

@ -184,8 +184,6 @@ namespace Language_jp_kana {
PROGMEM Language_Str MSG_THERMAL_RUNAWAY = _UxGT("ネツボウソウ"); // "THERMAL RUNAWAY" PROGMEM Language_Str MSG_THERMAL_RUNAWAY = _UxGT("ネツボウソウ"); // "THERMAL RUNAWAY"
PROGMEM Language_Str MSG_ERR_MAXTEMP = _UxGT("エラー:サイコウオンチョウカ"); // "Err: MAXTEMP" PROGMEM Language_Str MSG_ERR_MAXTEMP = _UxGT("エラー:サイコウオンチョウカ"); // "Err: MAXTEMP"
PROGMEM Language_Str MSG_ERR_MINTEMP = _UxGT("エラー:サイテイオンミマン"); // "Err: MINTEMP" PROGMEM Language_Str MSG_ERR_MINTEMP = _UxGT("エラー:サイテイオンミマン"); // "Err: MINTEMP"
PROGMEM Language_Str MSG_ERR_MAXTEMP_BED = _UxGT("エラー:ベッド サイコウオンチョウカ"); // "Err: MAXTEMP BED"
PROGMEM Language_Str MSG_ERR_MINTEMP_BED = _UxGT("エラー:ベッド サイテイオンミマン"); // "Err: MINTEMP BED"
PROGMEM Language_Str MSG_HALTED = _UxGT("プリンターハテイシシマシタ"); // "PRINTER HALTED" PROGMEM Language_Str MSG_HALTED = _UxGT("プリンターハテイシシマシタ"); // "PRINTER HALTED"
PROGMEM Language_Str MSG_PLEASE_RESET = _UxGT("リセットシテクダサイ"); // "Please reset" PROGMEM Language_Str MSG_PLEASE_RESET = _UxGT("リセットシテクダサイ"); // "Please reset"
PROGMEM Language_Str MSG_SHORT_DAY = _UxGT("d"); // One character only PROGMEM Language_Str MSG_SHORT_DAY = _UxGT("d"); // One character only

View File

@ -164,8 +164,6 @@ namespace Language_nl {
PROGMEM Language_Str MSG_THERMAL_RUNAWAY = _UxGT("Therm. wegloop"); PROGMEM Language_Str MSG_THERMAL_RUNAWAY = _UxGT("Therm. wegloop");
PROGMEM Language_Str MSG_ERR_MAXTEMP = _UxGT("Err: Max. temp"); PROGMEM Language_Str MSG_ERR_MAXTEMP = _UxGT("Err: Max. temp");
PROGMEM Language_Str MSG_ERR_MINTEMP = _UxGT("Err: Min. temp"); PROGMEM Language_Str MSG_ERR_MINTEMP = _UxGT("Err: Min. temp");
PROGMEM Language_Str MSG_ERR_MAXTEMP_BED = _UxGT("Err: Max.tmp bed");
PROGMEM Language_Str MSG_ERR_MINTEMP_BED = _UxGT("Err: Min.tmp bed");
PROGMEM Language_Str MSG_HALTED = _UxGT("PRINTER GESTOPT"); PROGMEM Language_Str MSG_HALTED = _UxGT("PRINTER GESTOPT");
PROGMEM Language_Str MSG_PLEASE_RESET = _UxGT("Reset A.U.B."); PROGMEM Language_Str MSG_PLEASE_RESET = _UxGT("Reset A.U.B.");
PROGMEM Language_Str MSG_SHORT_DAY = _UxGT("d"); // One character only. Keep English standard PROGMEM Language_Str MSG_SHORT_DAY = _UxGT("d"); // One character only. Keep English standard

View File

@ -391,10 +391,6 @@ namespace Language_pl {
PROGMEM Language_Str MSG_THERMAL_RUNAWAY_CHAMBER = _UxGT("ZANIK TEMP.KOMORY"); PROGMEM Language_Str MSG_THERMAL_RUNAWAY_CHAMBER = _UxGT("ZANIK TEMP.KOMORY");
PROGMEM Language_Str MSG_ERR_MAXTEMP = _UxGT("Błąd: MAXTEMP"); PROGMEM Language_Str MSG_ERR_MAXTEMP = _UxGT("Błąd: MAXTEMP");
PROGMEM Language_Str MSG_ERR_MINTEMP = _UxGT("Błąd: MINTEMP"); PROGMEM Language_Str MSG_ERR_MINTEMP = _UxGT("Błąd: MINTEMP");
PROGMEM Language_Str MSG_ERR_MAXTEMP_BED = _UxGT("Błąd: MAXTEMP STÓŁ");
PROGMEM Language_Str MSG_ERR_MINTEMP_BED = _UxGT("Błąd: MINTEMP STÓŁ");
PROGMEM Language_Str MSG_ERR_MAXTEMP_CHAMBER = _UxGT("Błąd: MAXTEMP KOMORA");
PROGMEM Language_Str MSG_ERR_MINTEMP_CHAMBER = _UxGT("Błąd: MINTEMP KOMORA");
PROGMEM Language_Str MSG_HALTED = _UxGT("Drukarka zatrzym."); PROGMEM Language_Str MSG_HALTED = _UxGT("Drukarka zatrzym.");
PROGMEM Language_Str MSG_PLEASE_RESET = _UxGT("Proszę zresetować"); PROGMEM Language_Str MSG_PLEASE_RESET = _UxGT("Proszę zresetować");
PROGMEM Language_Str MSG_SHORT_DAY = _UxGT("d"); // One character only PROGMEM Language_Str MSG_SHORT_DAY = _UxGT("d"); // One character only

View File

@ -150,8 +150,6 @@ namespace Language_pt {
PROGMEM Language_Str MSG_HEATING_FAILED_LCD = _UxGT("Aquecimento falhou"); PROGMEM Language_Str MSG_HEATING_FAILED_LCD = _UxGT("Aquecimento falhou");
PROGMEM Language_Str MSG_ERR_MAXTEMP = _UxGT("Err: T Máxima"); PROGMEM Language_Str MSG_ERR_MAXTEMP = _UxGT("Err: T Máxima");
PROGMEM Language_Str MSG_ERR_MINTEMP = _UxGT("Err: T Mínima"); PROGMEM Language_Str MSG_ERR_MINTEMP = _UxGT("Err: T Mínima");
PROGMEM Language_Str MSG_ERR_MAXTEMP_BED = _UxGT("Err: T Base Máxima");
PROGMEM Language_Str MSG_ERR_MINTEMP_BED = _UxGT("Err: T Base Mínima");
PROGMEM Language_Str MSG_HEATING = _UxGT("Aquecendo..."); PROGMEM Language_Str MSG_HEATING = _UxGT("Aquecendo...");
PROGMEM Language_Str MSG_BED_HEATING = _UxGT("Aquecendo base..."); PROGMEM Language_Str MSG_BED_HEATING = _UxGT("Aquecendo base...");
PROGMEM Language_Str MSG_DELTA_CALIBRATE = _UxGT("Calibração Delta"); PROGMEM Language_Str MSG_DELTA_CALIBRATE = _UxGT("Calibração Delta");

View File

@ -357,10 +357,6 @@ namespace Language_pt_br {
PROGMEM Language_Str MSG_THERMAL_RUNAWAY_CHAMBER = _UxGT("ESCAPE TÉRMICO CAMARA"); PROGMEM Language_Str MSG_THERMAL_RUNAWAY_CHAMBER = _UxGT("ESCAPE TÉRMICO CAMARA");
PROGMEM Language_Str MSG_ERR_MAXTEMP = _UxGT("Erro:Temp Máxima"); PROGMEM Language_Str MSG_ERR_MAXTEMP = _UxGT("Erro:Temp Máxima");
PROGMEM Language_Str MSG_ERR_MINTEMP = _UxGT("Erro:Temp Mínima"); PROGMEM Language_Str MSG_ERR_MINTEMP = _UxGT("Erro:Temp Mínima");
PROGMEM Language_Str MSG_ERR_MAXTEMP_BED = _UxGT("Erro:Temp Mesa Máx");
PROGMEM Language_Str MSG_ERR_MINTEMP_BED = _UxGT("Erro:Temp Mesa Mín");
PROGMEM Language_Str MSG_ERR_MAXTEMP_CHAMBER = _UxGT("Erro:Temp Câmara Máx");
PROGMEM Language_Str MSG_ERR_MINTEMP_CHAMBER = _UxGT("Erro:Temp Câmara Min");
PROGMEM Language_Str MSG_HALTED = _UxGT("IMPRESSORA PAROU"); PROGMEM Language_Str MSG_HALTED = _UxGT("IMPRESSORA PAROU");
PROGMEM Language_Str MSG_PLEASE_RESET = _UxGT("Favor resetar"); PROGMEM Language_Str MSG_PLEASE_RESET = _UxGT("Favor resetar");
PROGMEM Language_Str MSG_SHORT_DAY = _UxGT("d"); PROGMEM Language_Str MSG_SHORT_DAY = _UxGT("d");

View File

@ -448,10 +448,6 @@ namespace Language_ro {
PROGMEM Language_Str MSG_THERMAL_RUNAWAY_CHAMBER = _UxGT("CHAMBER T. RUNAWAY"); PROGMEM Language_Str MSG_THERMAL_RUNAWAY_CHAMBER = _UxGT("CHAMBER T. RUNAWAY");
PROGMEM Language_Str MSG_ERR_MAXTEMP = _UxGT("Err: MAXTEMP"); PROGMEM Language_Str MSG_ERR_MAXTEMP = _UxGT("Err: MAXTEMP");
PROGMEM Language_Str MSG_ERR_MINTEMP = _UxGT("Err: MINTEMP"); PROGMEM Language_Str MSG_ERR_MINTEMP = _UxGT("Err: MINTEMP");
PROGMEM Language_Str MSG_ERR_MAXTEMP_BED = _UxGT("Err: MAXTEMP BED");
PROGMEM Language_Str MSG_ERR_MINTEMP_BED = _UxGT("Err: MINTEMP BED");
PROGMEM Language_Str MSG_ERR_MAXTEMP_CHAMBER = _UxGT("Err: MAXTEMP CHAMBER");
PROGMEM Language_Str MSG_ERR_MINTEMP_CHAMBER = _UxGT("Err: MINTEMP CHAMBER");
PROGMEM Language_Str MSG_HALTED = _UxGT("PRINTER HALTED"); PROGMEM Language_Str MSG_HALTED = _UxGT("PRINTER HALTED");
PROGMEM Language_Str MSG_PLEASE_RESET = _UxGT("Please Reset"); PROGMEM Language_Str MSG_PLEASE_RESET = _UxGT("Please Reset");
PROGMEM Language_Str MSG_SHORT_DAY = _UxGT("d"); // One character only PROGMEM Language_Str MSG_SHORT_DAY = _UxGT("d"); // One character only

View File

@ -536,10 +536,6 @@ namespace Language_ru {
PROGMEM Language_Str MSG_THERMAL_RUNAWAY_CHAMBER = _UxGT("УТЕЧКА ТЕПЛА КАМЕРЫ"); PROGMEM Language_Str MSG_THERMAL_RUNAWAY_CHAMBER = _UxGT("УТЕЧКА ТЕПЛА КАМЕРЫ");
PROGMEM Language_Str MSG_ERR_MAXTEMP = _UxGT("Ошибка: Т макс."); PROGMEM Language_Str MSG_ERR_MAXTEMP = _UxGT("Ошибка: Т макс.");
PROGMEM Language_Str MSG_ERR_MINTEMP = _UxGT("Ошибка: Т мин."); PROGMEM Language_Str MSG_ERR_MINTEMP = _UxGT("Ошибка: Т мин.");
PROGMEM Language_Str MSG_ERR_MAXTEMP_BED = _UxGT("Ошибка: Т стола макс");
PROGMEM Language_Str MSG_ERR_MINTEMP_BED = _UxGT("Ошибка: Т стола мин.");
PROGMEM Language_Str MSG_ERR_MAXTEMP_CHAMBER = _UxGT("Ошибка:Т камеры макс");
PROGMEM Language_Str MSG_ERR_MINTEMP_CHAMBER = _UxGT("Ошибка:Т камеры мин.");
PROGMEM Language_Str MSG_HALTED = _UxGT("ПРИНТЕР ОСТАНОВЛЕН"); PROGMEM Language_Str MSG_HALTED = _UxGT("ПРИНТЕР ОСТАНОВЛЕН");
PROGMEM Language_Str MSG_PLEASE_RESET = _UxGT("Сделайте сброс"); PROGMEM Language_Str MSG_PLEASE_RESET = _UxGT("Сделайте сброс");
PROGMEM Language_Str MSG_SHORT_DAY = _UxGT("д"); // One character only PROGMEM Language_Str MSG_SHORT_DAY = _UxGT("д"); // One character only

View File

@ -441,10 +441,6 @@ namespace Language_sk {
PROGMEM Language_Str MSG_THERMAL_RUNAWAY_CHAMBER = _UxGT("TEPLOTNÝ SKOK KOMO."); PROGMEM Language_Str MSG_THERMAL_RUNAWAY_CHAMBER = _UxGT("TEPLOTNÝ SKOK KOMO.");
PROGMEM Language_Str MSG_ERR_MAXTEMP = _UxGT("Chyba: MAXTEMP"); PROGMEM Language_Str MSG_ERR_MAXTEMP = _UxGT("Chyba: MAXTEMP");
PROGMEM Language_Str MSG_ERR_MINTEMP = _UxGT("Chyba: MINTEMP"); PROGMEM Language_Str MSG_ERR_MINTEMP = _UxGT("Chyba: MINTEMP");
PROGMEM Language_Str MSG_ERR_MAXTEMP_BED = _UxGT("Chyba: MAXTEMP PODL.");
PROGMEM Language_Str MSG_ERR_MINTEMP_BED = _UxGT("Chyba: MINTEMP PODL.");
PROGMEM Language_Str MSG_ERR_MAXTEMP_CHAMBER = _UxGT("Chyba: MAXTEMP KOMO.");
PROGMEM Language_Str MSG_ERR_MINTEMP_CHAMBER = _UxGT("Chyba: MINTEMP KOMO.");
PROGMEM Language_Str MSG_HALTED = _UxGT("TLAČIAREŇ ZASTAVENÁ"); PROGMEM Language_Str MSG_HALTED = _UxGT("TLAČIAREŇ ZASTAVENÁ");
PROGMEM Language_Str MSG_PLEASE_RESET = _UxGT("Reštartuje ju"); PROGMEM Language_Str MSG_PLEASE_RESET = _UxGT("Reštartuje ju");
PROGMEM Language_Str MSG_SHORT_DAY = _UxGT("d"); PROGMEM Language_Str MSG_SHORT_DAY = _UxGT("d");

View File

@ -420,10 +420,6 @@ namespace Language_tr {
PROGMEM Language_Str MSG_THERMAL_RUNAWAY_CHAMBER = _UxGT("ODA TERMAL PROBLEM"); PROGMEM Language_Str MSG_THERMAL_RUNAWAY_CHAMBER = _UxGT("ODA TERMAL PROBLEM");
PROGMEM Language_Str MSG_ERR_MAXTEMP = _UxGT("Hata: MAX.SICAKLIK"); PROGMEM Language_Str MSG_ERR_MAXTEMP = _UxGT("Hata: MAX.SICAKLIK");
PROGMEM Language_Str MSG_ERR_MINTEMP = _UxGT("Hata: MIN.SICAKLIK"); PROGMEM Language_Str MSG_ERR_MINTEMP = _UxGT("Hata: MIN.SICAKLIK");
PROGMEM Language_Str MSG_ERR_MAXTEMP_BED = _UxGT("Hata: MAX.SIC. TABLA");
PROGMEM Language_Str MSG_ERR_MINTEMP_BED = _UxGT("Hata: MIN.SIC. TABLA");
PROGMEM Language_Str MSG_ERR_MAXTEMP_CHAMBER = _UxGT("Hata: MAX.SIC ODA");
PROGMEM Language_Str MSG_ERR_MINTEMP_CHAMBER = _UxGT("Hata: MIN.SIC ODA");
PROGMEM Language_Str MSG_HALTED = _UxGT("YAZICI DURDURULDU"); PROGMEM Language_Str MSG_HALTED = _UxGT("YAZICI DURDURULDU");
PROGMEM Language_Str MSG_PLEASE_RESET = _UxGT("Lütfen Resetleyin"); PROGMEM Language_Str MSG_PLEASE_RESET = _UxGT("Lütfen Resetleyin");
PROGMEM Language_Str MSG_SHORT_DAY = _UxGT("G"); // One character only PROGMEM Language_Str MSG_SHORT_DAY = _UxGT("G"); // One character only

View File

@ -530,10 +530,6 @@ namespace Language_uk {
PROGMEM Language_Str MSG_THERMAL_RUNAWAY_CHAMBER = _UxGT("ВИТІК ТЕПЛА КАМЕРИ"); PROGMEM Language_Str MSG_THERMAL_RUNAWAY_CHAMBER = _UxGT("ВИТІК ТЕПЛА КАМЕРИ");
PROGMEM Language_Str MSG_ERR_MAXTEMP = _UxGT("ПЕРЕГРІВ"); PROGMEM Language_Str MSG_ERR_MAXTEMP = _UxGT("ПЕРЕГРІВ");
PROGMEM Language_Str MSG_ERR_MINTEMP = _UxGT("МІНІМАЛЬНА Т") LCD_STR_DEGREE; PROGMEM Language_Str MSG_ERR_MINTEMP = _UxGT("МІНІМАЛЬНА Т") LCD_STR_DEGREE;
PROGMEM Language_Str MSG_ERR_MAXTEMP_BED = _UxGT("ПЕРЕГРІВ СТОЛУ");
PROGMEM Language_Str MSG_ERR_MINTEMP_BED = _UxGT("МІНІМАЛЬНА Т") LCD_STR_DEGREE _UxGT(" СТОЛУ");
PROGMEM Language_Str MSG_ERR_MAXTEMP_CHAMBER = _UxGT("ПЕРЕГРІВ КАМЕРИ");
PROGMEM Language_Str MSG_ERR_MINTEMP_CHAMBER = _UxGT("МІНІМАЛЬНА Т") LCD_STR_DEGREE _UxGT(" КАМЕРИ");
PROGMEM Language_Str MSG_HALTED = _UxGT("ПРИНТЕР ЗУПИНЕНО"); PROGMEM Language_Str MSG_HALTED = _UxGT("ПРИНТЕР ЗУПИНЕНО");
PROGMEM Language_Str MSG_PLEASE_RESET = _UxGT("Перезавантажте"); PROGMEM Language_Str MSG_PLEASE_RESET = _UxGT("Перезавантажте");
PROGMEM Language_Str MSG_SHORT_DAY = _UxGT("д"); // One character only PROGMEM Language_Str MSG_SHORT_DAY = _UxGT("д"); // One character only

View File

@ -335,8 +335,6 @@ namespace Language_vi {
PROGMEM Language_Str MSG_THERMAL_RUNAWAY_BED = _UxGT("Vấn đề nhiệt bàn"); // BED THERMAL RUNAWAY PROGMEM Language_Str MSG_THERMAL_RUNAWAY_BED = _UxGT("Vấn đề nhiệt bàn"); // BED THERMAL RUNAWAY
PROGMEM Language_Str MSG_ERR_MAXTEMP = _UxGT("Điều sai: nhiệt độ tối đa"); // Err: MAXTEMP PROGMEM Language_Str MSG_ERR_MAXTEMP = _UxGT("Điều sai: nhiệt độ tối đa"); // Err: MAXTEMP
PROGMEM Language_Str MSG_ERR_MINTEMP = _UxGT("Điều sai: nhiệt độ tối thiểu"); // Err: MINTEMP PROGMEM Language_Str MSG_ERR_MINTEMP = _UxGT("Điều sai: nhiệt độ tối thiểu"); // Err: MINTEMP
PROGMEM Language_Str MSG_ERR_MAXTEMP_BED = _UxGT("Điều sai: nhiệt độ bàn tối đa"); // Err: MAXTEMP BED
PROGMEM Language_Str MSG_ERR_MINTEMP_BED = _UxGT("Điều sai: nhiệt độ bàn tối thiểu"); // Err: MINTEMP BED
PROGMEM Language_Str MSG_HALTED = _UxGT("MÁY IN ĐÃ DỪNG LẠI"); // PRINTER HALTED PROGMEM Language_Str MSG_HALTED = _UxGT("MÁY IN ĐÃ DỪNG LẠI"); // PRINTER HALTED
PROGMEM Language_Str MSG_PLEASE_RESET = _UxGT("Xin bặt lại"); // Please reset PROGMEM Language_Str MSG_PLEASE_RESET = _UxGT("Xin bặt lại"); // Please reset
PROGMEM Language_Str MSG_SHORT_DAY = _UxGT("n"); // d - ngày - One character only PROGMEM Language_Str MSG_SHORT_DAY = _UxGT("n"); // d - ngày - One character only

View File

@ -447,10 +447,6 @@ namespace Language_zh_CN {
PROGMEM Language_Str MSG_THERMAL_RUNAWAY_CHAMBER = _UxGT("机箱热量失控"); PROGMEM Language_Str MSG_THERMAL_RUNAWAY_CHAMBER = _UxGT("机箱热量失控");
PROGMEM Language_Str MSG_ERR_MAXTEMP = _UxGT("错误:最高温度"); //"Err: MAXTEMP" PROGMEM Language_Str MSG_ERR_MAXTEMP = _UxGT("错误:最高温度"); //"Err: MAXTEMP"
PROGMEM Language_Str MSG_ERR_MINTEMP = _UxGT("错误:最低温度"); //"Err: MINTEMP" PROGMEM Language_Str MSG_ERR_MINTEMP = _UxGT("错误:最低温度"); //"Err: MINTEMP"
PROGMEM Language_Str MSG_ERR_MAXTEMP_BED = _UxGT("错误:最高热床温度"); //"Err: MAXTEMP BED"
PROGMEM Language_Str MSG_ERR_MINTEMP_BED = _UxGT("错误:最低热床温度"); //"Err: MINTEMP BED"
PROGMEM Language_Str MSG_ERR_MAXTEMP_CHAMBER = _UxGT("错误:最高机箱温度");
PROGMEM Language_Str MSG_ERR_MINTEMP_CHAMBER = _UxGT("错误:最低机箱温度");
PROGMEM Language_Str MSG_HALTED = _UxGT("打印停机"); //"PRINTER HALTED" PROGMEM Language_Str MSG_HALTED = _UxGT("打印停机"); //"PRINTER HALTED"
PROGMEM Language_Str MSG_PLEASE_RESET = _UxGT("请重置"); //"Please reset" PROGMEM Language_Str MSG_PLEASE_RESET = _UxGT("请重置"); //"Please reset"
PROGMEM Language_Str MSG_SHORT_DAY = _UxGT(""); //"d" // One character only PROGMEM Language_Str MSG_SHORT_DAY = _UxGT(""); //"d" // One character only

View File

@ -388,10 +388,6 @@ namespace Language_zh_TW {
PROGMEM Language_Str MSG_THERMAL_RUNAWAY_CHAMBER = _UxGT("機箱溫度失控"); //"CHAMBER T. RUNAWAY" PROGMEM Language_Str MSG_THERMAL_RUNAWAY_CHAMBER = _UxGT("機箱溫度失控"); //"CHAMBER T. RUNAWAY"
PROGMEM Language_Str MSG_ERR_MAXTEMP = _UxGT("錯誤:最高溫度"); //"Err: MAXTEMP" PROGMEM Language_Str MSG_ERR_MAXTEMP = _UxGT("錯誤:最高溫度"); //"Err: MAXTEMP"
PROGMEM Language_Str MSG_ERR_MINTEMP = _UxGT("錯誤:最低溫度"); //"Err: MINTEMP" PROGMEM Language_Str MSG_ERR_MINTEMP = _UxGT("錯誤:最低溫度"); //"Err: MINTEMP"
PROGMEM Language_Str MSG_ERR_MAXTEMP_BED = _UxGT("錯誤:最高熱床溫度"); //"Err: MAXTEMP BED"
PROGMEM Language_Str MSG_ERR_MINTEMP_BED = _UxGT("錯誤:最低熱床溫度"); //"Err: MINTEMP BED"
PROGMEM Language_Str MSG_ERR_MAXTEMP_CHAMBER = _UxGT("錯誤:最高機箱溫度"); //"Err: MAXTEMP CHAMBER"
PROGMEM Language_Str MSG_ERR_MINTEMP_CHAMBER = _UxGT("錯誤:最低機箱溫度"); //"Err: MINTEMP CHAMBER"
PROGMEM Language_Str MSG_HALTED = _UxGT("印表機停機"); //"PRINTER HALTED" PROGMEM Language_Str MSG_HALTED = _UxGT("印表機停機"); //"PRINTER HALTED"
PROGMEM Language_Str MSG_PLEASE_RESET = _UxGT("請重置"); //"Please reset" PROGMEM Language_Str MSG_PLEASE_RESET = _UxGT("請重置"); //"Please reset"
PROGMEM Language_Str MSG_SHORT_DAY = _UxGT(""); //"d" // One character only PROGMEM Language_Str MSG_SHORT_DAY = _UxGT(""); //"d" // One character only

View File

@ -34,10 +34,6 @@
#include "../../libs/buzzer.h" #include "../../libs/buzzer.h"
#endif #endif
#if WATCH_HOTENDS || WATCH_BED
#include "../../module/temperature.h"
#endif
#if ENABLED(BABYSTEP_ZPROBE_OFFSET) #if ENABLED(BABYSTEP_ZPROBE_OFFSET)
#include "../../module/probe.h" #include "../../module/probe.h"
#endif #endif

View File

@ -252,7 +252,7 @@ const char str_t_thermal_runaway[] PROGMEM = STR_T_THERMAL_RUNAWAY,
hotend_watch_t Temperature::watch_hotend[HOTENDS]; // = { { 0 } } hotend_watch_t Temperature::watch_hotend[HOTENDS]; // = { { 0 } }
#endif #endif
#if HEATER_IDLE_HANDLER #if HEATER_IDLE_HANDLER
hotend_idle_t Temperature::hotend_idle[HOTENDS]; // = { { 0 } } Temperature::heater_idle_t Temperature::heater_idle[NR_HEATER_IDLE]; // = { { 0 } }
#endif #endif
#if HAS_HEATED_BED #if HAS_HEATED_BED
@ -266,7 +266,6 @@ const char str_t_thermal_runaway[] PROGMEM = STR_T_THERMAL_RUNAWAY,
#endif #endif
TERN_(WATCH_BED, bed_watch_t Temperature::watch_bed); // = { 0 } TERN_(WATCH_BED, bed_watch_t Temperature::watch_bed); // = { 0 }
TERN(PIDTEMPBED,, millis_t Temperature::next_bed_check_ms); TERN(PIDTEMPBED,, millis_t Temperature::next_bed_check_ms);
TERN_(HEATER_IDLE_HANDLER, hotend_idle_t Temperature::bed_idle); // = { 0 }
#endif // HAS_HEATED_BED #endif // HAS_HEATED_BED
#if HAS_TEMP_CHAMBER #if HAS_TEMP_CHAMBER
@ -841,7 +840,7 @@ void Temperature::min_temp_error(const heater_id_t heater_id) {
if (temp_hotend[ee].target == 0 if (temp_hotend[ee].target == 0
|| pid_error < -(PID_FUNCTIONAL_RANGE) || pid_error < -(PID_FUNCTIONAL_RANGE)
|| TERN0(HEATER_IDLE_HANDLER, hotend_idle[ee].timed_out) || TERN0(HEATER_IDLE_HANDLER, heater_idle[ee].timed_out)
) { ) {
pid_output = 0; pid_output = 0;
pid_reset[ee] = true; pid_reset[ee] = true;
@ -926,7 +925,7 @@ void Temperature::min_temp_error(const heater_id_t heater_id) {
#else // No PID enabled #else // No PID enabled
const bool is_idling = TERN0(HEATER_IDLE_HANDLER, hotend_idle[ee].timed_out); const bool is_idling = TERN0(HEATER_IDLE_HANDLER, heater_idle[ee].timed_out);
const float pid_output = (!is_idling && temp_hotend[ee].celsius < temp_hotend[ee].target) ? BANG_MAX : 0; const float pid_output = (!is_idling && temp_hotend[ee].celsius < temp_hotend[ee].target) ? BANG_MAX : 0;
#endif #endif
@ -1040,15 +1039,14 @@ void Temperature::manage_heater() {
HOTEND_LOOP() { HOTEND_LOOP() {
#if ENABLED(THERMAL_PROTECTION_HOTENDS) #if ENABLED(THERMAL_PROTECTION_HOTENDS)
if (degHotend(e) > temp_range[e].maxtemp) if (degHotend(e) > temp_range[e].maxtemp) max_temp_error((heater_id_t)e);
_temp_error((heater_id_t)e, str_t_thermal_runaway, GET_TEXT(MSG_THERMAL_RUNAWAY));
#endif #endif
TERN_(HEATER_IDLE_HANDLER, hotend_idle[e].update(ms)); TERN_(HEATER_IDLE_HANDLER, heater_idle[e].update(ms));
#if ENABLED(THERMAL_PROTECTION_HOTENDS) #if ENABLED(THERMAL_PROTECTION_HOTENDS)
// Check for thermal runaway // Check for thermal runaway
thermal_runaway_protection(tr_state_machine[e], temp_hotend[e].celsius, temp_hotend[e].target, (heater_id_t)e, THERMAL_PROTECTION_PERIOD, THERMAL_PROTECTION_HYSTERESIS); tr_state_machine[e].run(temp_hotend[e].celsius, temp_hotend[e].target, (heater_id_t)e, THERMAL_PROTECTION_PERIOD, THERMAL_PROTECTION_HYSTERESIS);
#endif #endif
temp_hotend[e].soft_pwm_amount = (temp_hotend[e].celsius > temp_range[e].mintemp || is_preheating(e)) && temp_hotend[e].celsius < temp_range[e].maxtemp ? (int)get_pid_output_hotend(e) >> 1 : 0; temp_hotend[e].soft_pwm_amount = (temp_hotend[e].celsius > temp_range[e].mintemp || is_preheating(e)) && temp_hotend[e].celsius < temp_range[e].maxtemp ? (int)get_pid_output_hotend(e) >> 1 : 0;
@ -1093,8 +1091,7 @@ void Temperature::manage_heater() {
#if HAS_HEATED_BED #if HAS_HEATED_BED
#if ENABLED(THERMAL_PROTECTION_BED) #if ENABLED(THERMAL_PROTECTION_BED)
if (degBed() > BED_MAXTEMP) if (degBed() > BED_MAXTEMP) max_temp_error(H_BED);
_temp_error(H_BED, str_t_thermal_runaway, GET_TEXT(MSG_THERMAL_RUNAWAY));
#endif #endif
#if WATCH_BED #if WATCH_BED
@ -1127,12 +1124,14 @@ void Temperature::manage_heater() {
TERN_(PAUSE_CHANGE_REQD, last_pause_state = paused); TERN_(PAUSE_CHANGE_REQD, last_pause_state = paused);
#endif #endif
TERN_(HEATER_IDLE_HANDLER, bed_idle.update(ms)); TERN_(HEATER_IDLE_HANDLER, heater_idle[IDLE_INDEX_BED].update(ms));
TERN_(HAS_THERMALLY_PROTECTED_BED, thermal_runaway_protection(tr_state_machine_bed, temp_bed.celsius, temp_bed.target, H_BED, THERMAL_PROTECTION_BED_PERIOD, THERMAL_PROTECTION_BED_HYSTERESIS)); #if HAS_THERMALLY_PROTECTED_BED
tr_state_machine[RUNAWAY_IND_BED].run(temp_bed.celsius, temp_bed.target, H_BED, THERMAL_PROTECTION_BED_PERIOD, THERMAL_PROTECTION_BED_HYSTERESIS);
#endif
#if HEATER_IDLE_HANDLER #if HEATER_IDLE_HANDLER
if (bed_idle.timed_out) { if (heater_idle[IDLE_INDEX_BED].timed_out) {
temp_bed.soft_pwm_amount = 0; temp_bed.soft_pwm_amount = 0;
#if DISABLED(PIDTEMPBED) #if DISABLED(PIDTEMPBED)
WRITE_HEATER_BED(LOW); WRITE_HEATER_BED(LOW);
@ -1173,8 +1172,7 @@ void Temperature::manage_heater() {
#endif #endif
#if ENABLED(THERMAL_PROTECTION_CHAMBER) #if ENABLED(THERMAL_PROTECTION_CHAMBER)
if (degChamber() > CHAMBER_MAXTEMP) if (degChamber() > CHAMBER_MAXTEMP) max_temp_error(H_CHAMBER);
_temp_error(H_CHAMBER, str_t_thermal_runaway, GET_TEXT(MSG_THERMAL_RUNAWAY));
#endif #endif
#if WATCH_CHAMBER #if WATCH_CHAMBER
@ -1205,7 +1203,9 @@ void Temperature::manage_heater() {
WRITE_HEATER_CHAMBER(LOW); WRITE_HEATER_CHAMBER(LOW);
} }
TERN_(THERMAL_PROTECTION_CHAMBER, thermal_runaway_protection(tr_state_machine_chamber, temp_chamber.celsius, temp_chamber.target, H_CHAMBER, THERMAL_PROTECTION_CHAMBER_PERIOD, THERMAL_PROTECTION_CHAMBER_HYSTERESIS)); #if ENABLED(THERMAL_PROTECTION_CHAMBER)
tr_state_machine[RUNAWAY_IND_CHAMBER].run(temp_chamber.celsius, temp_chamber.target, H_CHAMBER, THERMAL_PROTECTION_CHAMBER_PERIOD, THERMAL_PROTECTION_CHAMBER_HYSTERESIS);
#endif
} }
// TODO: Implement true PID pwm // TODO: Implement true PID pwm
@ -1935,61 +1935,66 @@ void Temperature::init() {
#if HAS_THERMAL_PROTECTION #if HAS_THERMAL_PROTECTION
#if ENABLED(THERMAL_PROTECTION_HOTENDS) Temperature::tr_state_machine_t Temperature::tr_state_machine[NR_HEATER_RUNAWAY]; // = { { TRInactive, 0 } };
Temperature::tr_state_machine_t Temperature::tr_state_machine[HOTENDS]; // = { { TRInactive, 0 } };
#endif
#if HAS_THERMALLY_PROTECTED_BED
Temperature::tr_state_machine_t Temperature::tr_state_machine_bed; // = { TRInactive, 0 };
#endif
#if ENABLED(THERMAL_PROTECTION_CHAMBER)
Temperature::tr_state_machine_t Temperature::tr_state_machine_chamber; // = { TRInactive, 0 };
#endif
void Temperature::thermal_runaway_protection(Temperature::tr_state_machine_t &sm, const float &current, const float &target, const heater_id_t heater_id, const uint16_t period_seconds, const uint16_t hysteresis_degc) { /**
* @brief Thermal Runaway state machine for a single heater
* @param current current measured temperature
* @param target current target temperature
* @param heater_id extruder index
* @param period_seconds missed temperature allowed time
* @param hysteresis_degc allowed distance from target
*
* TODO: Embed the last 3 parameters during init, if not less optimal
*/
void Temperature::tr_state_machine_t::run(const float &current, const float &target, const heater_id_t heater_id, const uint16_t period_seconds, const uint16_t hysteresis_degc) {
static float tr_target_temperature[HOTENDS + 1] = { 0.0 }; #if HEATER_IDLE_HANDLER
// Convert the given heater_id_t to an idle array index
const IdleIndex idle_index = idle_index_for_id(heater_id);
#endif
/** /**
SERIAL_ECHO_START(); SERIAL_ECHO_START();
SERIAL_ECHOPGM("Thermal Runaway Running. Heater ID: "); SERIAL_ECHOPGM("Thermal Runaway Running. Heater ID: ");
if (heater_id == H_CHAMBER) SERIAL_ECHOPGM("chamber"); switch (heater_id) {
if (heater_id < 0) SERIAL_ECHOPGM("bed"); else SERIAL_ECHO(heater_id); case H_BED: SERIAL_ECHOPGM("bed"); break;
SERIAL_ECHOPAIR(" ; State:", sm.state, " ; Timer:", sm.timer, " ; Temperature:", current, " ; Target Temp:", target); case H_CHAMBER: SERIAL_ECHOPGM("chamber"); break;
if (heater_id >= 0) default: SERIAL_ECHO(heater_id);
SERIAL_ECHOPAIR(" ; Idle Timeout:", hotend_idle[heater_id].timed_out); }
else SERIAL_ECHOLNPAIR(
SERIAL_ECHOPAIR(" ; Idle Timeout:", bed_idle.timed_out); " ; sizeof(running_temp):", sizeof(running_temp),
SERIAL_EOL(); " ; State:", state, " ; Timer:", timer, " ; Temperature:", current, " ; Target Temp:", target
#if HEATER_IDLE_HANDLER
, " ; Idle Timeout:", heater_idle[idle_index].timed_out
#endif
);
//*/ //*/
const int heater_index = heater_id >= 0 ? heater_id : HOTENDS;
#if HEATER_IDLE_HANDLER #if HEATER_IDLE_HANDLER
// If the heater idle timeout expires, restart // If the heater idle timeout expires, restart
if ((heater_id >= 0 && hotend_idle[heater_id].timed_out) if (heater_idle[idle_index].timed_out) {
|| TERN0(HAS_HEATED_BED, (heater_id < 0 && bed_idle.timed_out)) state = TRInactive;
) { running_temp = 0;
sm.state = TRInactive;
tr_target_temperature[heater_index] = 0;
} }
else else
#endif #endif
{ {
// If the target temperature changes, restart // If the target temperature changes, restart
if (tr_target_temperature[heater_index] != target) { if (running_temp != target) {
tr_target_temperature[heater_index] = target; running_temp = target;
sm.state = target > 0 ? TRFirstHeating : TRInactive; state = target > 0 ? TRFirstHeating : TRInactive;
} }
} }
switch (sm.state) { switch (state) {
// Inactive state waits for a target temperature to be set // Inactive state waits for a target temperature to be set
case TRInactive: break; case TRInactive: break;
// When first heating, wait for the temperature to be reached then go to Stable state // When first heating, wait for the temperature to be reached then go to Stable state
case TRFirstHeating: case TRFirstHeating:
if (current < tr_target_temperature[heater_index]) break; if (current < running_temp) break;
sm.state = TRStable; state = TRStable;
// While the temperature is stable watch for a bad temperature // While the temperature is stable watch for a bad temperature
case TRStable: case TRStable:
@ -1997,25 +2002,25 @@ void Temperature::init() {
#if ENABLED(ADAPTIVE_FAN_SLOWING) #if ENABLED(ADAPTIVE_FAN_SLOWING)
if (adaptive_fan_slowing && heater_id >= 0) { if (adaptive_fan_slowing && heater_id >= 0) {
const int fan_index = _MIN(heater_id, FAN_COUNT - 1); const int fan_index = _MIN(heater_id, FAN_COUNT - 1);
if (fan_speed[fan_index] == 0 || current >= tr_target_temperature[heater_id] - (hysteresis_degc * 0.25f)) if (fan_speed[fan_index] == 0 || current >= running_temp - (hysteresis_degc * 0.25f))
fan_speed_scaler[fan_index] = 128; fan_speed_scaler[fan_index] = 128;
else if (current >= tr_target_temperature[heater_id] - (hysteresis_degc * 0.3335f)) else if (current >= running_temp - (hysteresis_degc * 0.3335f))
fan_speed_scaler[fan_index] = 96; fan_speed_scaler[fan_index] = 96;
else if (current >= tr_target_temperature[heater_id] - (hysteresis_degc * 0.5f)) else if (current >= running_temp - (hysteresis_degc * 0.5f))
fan_speed_scaler[fan_index] = 64; fan_speed_scaler[fan_index] = 64;
else if (current >= tr_target_temperature[heater_id] - (hysteresis_degc * 0.8f)) else if (current >= running_temp - (hysteresis_degc * 0.8f))
fan_speed_scaler[fan_index] = 32; fan_speed_scaler[fan_index] = 32;
else else
fan_speed_scaler[fan_index] = 0; fan_speed_scaler[fan_index] = 0;
} }
#endif #endif
if (current >= tr_target_temperature[heater_index] - hysteresis_degc) { if (current >= running_temp - hysteresis_degc) {
sm.timer = millis() + SEC_TO_MS(period_seconds); timer = millis() + SEC_TO_MS(period_seconds);
break; break;
} }
else if (PENDING(millis(), sm.timer)) break; else if (PENDING(millis(), timer)) break;
sm.state = TRRunaway; state = TRRunaway;
case TRRunaway: case TRRunaway:
TERN_(DWIN_CREALITY_LCD, Popup_Window_Temperature(0)); TERN_(DWIN_CREALITY_LCD, Popup_Window_Temperature(0));
@ -2086,8 +2091,8 @@ void Temperature::disable_all_heaters() {
if (p != paused) { if (p != paused) {
paused = p; paused = p;
if (p) { if (p) {
HOTEND_LOOP() hotend_idle[e].expire(); // Timeout immediately HOTEND_LOOP() heater_idle[e].expire(); // Timeout immediately
TERN_(HAS_HEATED_BED, bed_idle.expire()); // Timeout immediately TERN_(HAS_HEATED_BED, heater_idle[IDLE_INDEX_BED].expire()); // Timeout immediately
} }
else { else {
HOTEND_LOOP() reset_hotend_idle_timer(e); HOTEND_LOOP() reset_hotend_idle_timer(e);
@ -2333,9 +2338,7 @@ void Temperature::readings_ready() {
#else #else
#define BEDCMP(A,B) ((A)>(B)) #define BEDCMP(A,B) ((A)>(B))
#endif #endif
const bool bed_on = temp_bed.target > 0 const bool bed_on = (temp_bed.target > 0) || TERN0(PIDTEMPBED, temp_bed.soft_pwm_amount > 0);
|| TERN0(PIDTEMPBED, temp_bed.soft_pwm_amount) > 0
;
if (BEDCMP(temp_bed.raw, maxtemp_raw_BED)) max_temp_error(H_BED); if (BEDCMP(temp_bed.raw, maxtemp_raw_BED)) max_temp_error(H_BED);
if (bed_on && BEDCMP(mintemp_raw_BED, temp_bed.raw)) min_temp_error(H_BED); if (bed_on && BEDCMP(mintemp_raw_BED, temp_bed.raw)) min_temp_error(H_BED);
#endif #endif

View File

@ -40,7 +40,7 @@
#define HOTEND_INDEX TERN(HAS_MULTI_HOTEND, e, 0) #define HOTEND_INDEX TERN(HAS_MULTI_HOTEND, e, 0)
#define E_NAME TERN_(HAS_MULTI_HOTEND, e) #define E_NAME TERN_(HAS_MULTI_HOTEND, e)
// Identifiers for other heaters // Heater identifiers. Positive values are hotends. Negative values are other heaters.
typedef enum : int8_t { typedef enum : int8_t {
INDEX_NONE = -5, INDEX_NONE = -5,
H_PROBE, H_REDUNDANT, H_CHAMBER, H_BED, H_PROBE, H_REDUNDANT, H_CHAMBER, H_BED,
@ -211,16 +211,6 @@ struct PIDHeaterInfo : public HeaterInfo {
typedef temp_info_t chamber_info_t; typedef temp_info_t chamber_info_t;
#endif #endif
// Heater idle handling
typedef struct {
millis_t timeout_ms;
bool timed_out;
inline void update(const millis_t &ms) { if (!timed_out && timeout_ms && ELAPSED(ms, timeout_ms)) timed_out = true; }
inline void start(const millis_t &ms) { timeout_ms = millis() + ms; timed_out = false; }
inline void reset() { timeout_ms = 0; timed_out = false; }
inline void expire() { start(0); }
} hotend_idle_t;
// Heater watch handling // Heater watch handling
template <int INCREASE, int HYSTERESIS, millis_t PERIOD> template <int INCREASE, int HYSTERESIS, millis_t PERIOD>
struct HeaterWatch { struct HeaterWatch {
@ -346,9 +336,38 @@ class Temperature {
FORCE_INLINE static bool targetHotEnoughToExtrude(const uint8_t e) { return !targetTooColdToExtrude(e); } FORCE_INLINE static bool targetHotEnoughToExtrude(const uint8_t e) { return !targetTooColdToExtrude(e); }
#if HEATER_IDLE_HANDLER #if HEATER_IDLE_HANDLER
static hotend_idle_t hotend_idle[HOTENDS];
TERN_(HAS_HEATED_BED, static hotend_idle_t bed_idle); // Heater idle handling. Marlin creates one per hotend and one for the heated bed.
TERN_(HAS_HEATED_CHAMBER, static hotend_idle_t chamber_idle); typedef struct {
millis_t timeout_ms;
bool timed_out;
inline void update(const millis_t &ms) { if (!timed_out && timeout_ms && ELAPSED(ms, timeout_ms)) timed_out = true; }
inline void start(const millis_t &ms) { timeout_ms = millis() + ms; timed_out = false; }
inline void reset() { timeout_ms = 0; timed_out = false; }
inline void expire() { start(0); }
} heater_idle_t;
// Indices and size for the heater_idle array
#define _ENUM_FOR_E(N) IDLE_INDEX_E##N,
enum IdleIndex : uint8_t {
REPEAT(HOTENDS, _ENUM_FOR_E)
#if ENABLED(HAS_HEATED_BED)
IDLE_INDEX_BED,
#endif
NR_HEATER_IDLE
};
#undef _ENUM_FOR_E
// Convert the given heater_id_t to idle array index
static inline IdleIndex idle_index_for_id(const int8_t heater_id) {
#if HAS_HEATED_BED
if (heater_id == H_BED) return IDLE_INDEX_BED;
#endif
return (IdleIndex)_MAX(heater_id, 0);
}
static heater_idle_t heater_idle[NR_HEATER_IDLE];
#endif #endif
private: private:
@ -747,13 +766,13 @@ class Temperature {
#if HEATER_IDLE_HANDLER #if HEATER_IDLE_HANDLER
static void reset_hotend_idle_timer(const uint8_t E_NAME) { static void reset_hotend_idle_timer(const uint8_t E_NAME) {
hotend_idle[HOTEND_INDEX].reset(); heater_idle[HOTEND_INDEX].reset();
start_watching_hotend(HOTEND_INDEX); start_watching_hotend(HOTEND_INDEX);
} }
#if HAS_HEATED_BED #if HAS_HEATED_BED
static void reset_bed_idle_timer() { static void reset_bed_idle_timer() {
bed_idle.reset(); heater_idle[IDLE_INDEX_BED].reset();
start_watching_bed(); start_watching_bed();
} }
#endif #endif
@ -815,22 +834,47 @@ class Temperature {
static void min_temp_error(const heater_id_t e); static void min_temp_error(const heater_id_t e);
static void max_temp_error(const heater_id_t e); static void max_temp_error(const heater_id_t e);
#define HAS_THERMAL_PROTECTION (EITHER(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_CHAMBER) || HAS_THERMALLY_PROTECTED_BED) #define HAS_THERMAL_PROTECTION ANY(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_CHAMBER, HAS_THERMALLY_PROTECTED_BED)
#if HAS_THERMAL_PROTECTION #if HAS_THERMAL_PROTECTION
// Indices and size for the tr_state_machine array. One for each protected heater.
#define _ENUM_FOR_E(N) RUNAWAY_IND_E##N,
enum RunawayIndex : uint8_t {
#if ENABLED(THERMAL_PROTECTION_HOTENDS)
REPEAT(HOTENDS, _ENUM_FOR_E)
#endif
#if ENABLED(HAS_THERMALLY_PROTECTED_BED)
RUNAWAY_IND_BED,
#endif
#if ENABLED(THERMAL_PROTECTION_CHAMBER)
RUNAWAY_IND_CHAMBER,
#endif
NR_HEATER_RUNAWAY
};
#undef _ENUM_FOR_E
// Convert the given heater_id_t to runaway state array index
static inline RunawayIndex runaway_index_for_id(const int8_t heater_id) {
#if HAS_THERMALLY_PROTECTED_CHAMBER
if (heater_id == H_CHAMBER) return RUNAWAY_IND_CHAMBER;
#endif
#if HAS_THERMALLY_PROTECTED_BED
if (heater_id == H_BED) return RUNAWAY_IND_BED;
#endif
return (RunawayIndex)_MAX(heater_id, 0);
}
enum TRState : char { TRInactive, TRFirstHeating, TRStable, TRRunaway }; enum TRState : char { TRInactive, TRFirstHeating, TRStable, TRRunaway };
typedef struct { typedef struct {
millis_t timer = 0; millis_t timer = 0;
TRState state = TRInactive; TRState state = TRInactive;
float running_temp;
void run(const float &current, const float &target, const heater_id_t heater_id, const uint16_t period_seconds, const uint16_t hysteresis_degc);
} tr_state_machine_t; } tr_state_machine_t;
TERN_(THERMAL_PROTECTION_HOTENDS, static tr_state_machine_t tr_state_machine[HOTENDS]); static tr_state_machine_t tr_state_machine[NR_HEATER_RUNAWAY];
TERN_(HAS_THERMALLY_PROTECTED_BED, static tr_state_machine_t tr_state_machine_bed);
TERN_(THERMAL_PROTECTION_CHAMBER, static tr_state_machine_t tr_state_machine_chamber);
static void thermal_runaway_protection(tr_state_machine_t &state, const float &current, const float &target, const heater_id_t heater_id, const uint16_t period_seconds, const uint16_t hysteresis_degc);
#endif // HAS_THERMAL_PROTECTION #endif // HAS_THERMAL_PROTECTION
}; };