From 9534c6e9033256f5d6de2b920124acf1fa829548 Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Thu, 28 Jul 2022 20:52:33 -0500 Subject: [PATCH] =?UTF-8?q?=F0=9F=8E=A8=20Misc.=20'else'=20cleanup?= MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit --- Marlin/src/HAL/STM32/tft/tft_ltdc.cpp | 4 +- Marlin/src/feature/direct_stepping.cpp | 19 +++---- .../generic/change_filament_screen.cpp | 4 +- .../generic/files_screen.cpp | 11 ++-- .../src/lcd/extui/mks_ui/wifiSerial_STM32.cpp | 53 ++++++++++--------- 5 files changed, 48 insertions(+), 43 deletions(-) diff --git a/Marlin/src/HAL/STM32/tft/tft_ltdc.cpp b/Marlin/src/HAL/STM32/tft/tft_ltdc.cpp index 66cfd65995..95871bf41f 100644 --- a/Marlin/src/HAL/STM32/tft/tft_ltdc.cpp +++ b/Marlin/src/HAL/STM32/tft/tft_ltdc.cpp @@ -372,9 +372,9 @@ void TFT_LTDC::TransmitDMA(uint32_t MemoryIncrease, uint16_t *Data, uint16_t Cou if (MemoryIncrease == DMA_PINC_ENABLE) { DrawImage(x_min, y_cur, x_min + width, y_cur + height, Data); Data += width * height; - } else { - DrawRect(x_min, y_cur, x_min + width, y_cur + height, *Data); } + else + DrawRect(x_min, y_cur, x_min + width, y_cur + height, *Data); y_cur += height; } diff --git a/Marlin/src/feature/direct_stepping.cpp b/Marlin/src/feature/direct_stepping.cpp index 052e79de41..13cf71e076 100644 --- a/Marlin/src/feature/direct_stepping.cpp +++ b/Marlin/src/feature/direct_stepping.cpp @@ -143,14 +143,16 @@ namespace DirectStepping { // special case for 8-bit, check if rolled back to 0 if (Cfg::DIRECTIONAL || !write_page_size) { // full 256 bytes if (write_byte_idx) return true; - } else { - if (write_byte_idx < write_page_size) return true; } - } else if (Cfg::DIRECTIONAL) { - if (write_byte_idx != Cfg::PAGE_SIZE) return true; - } else { - if (write_byte_idx < write_page_size) return true; + else if (write_byte_idx < write_page_size) + return true; } + else if (Cfg::DIRECTIONAL) { + if (write_byte_idx != Cfg::PAGE_SIZE) + return true; + } + else if (write_byte_idx < write_page_size) + return true; state = State::CHECKSUM; return true; @@ -161,11 +163,10 @@ namespace DirectStepping { return true; } case State::UNFAIL: - if (c == 0) { + if (c == 0) set_page_state(write_page_idx, PageState::FREE); - } else { + else fatal_error = true; - } state = State::MONITOR; return true; } diff --git a/Marlin/src/lcd/extui/ftdi_eve_touch_ui/generic/change_filament_screen.cpp b/Marlin/src/lcd/extui/ftdi_eve_touch_ui/generic/change_filament_screen.cpp index fa0748c17b..17ec975692 100644 --- a/Marlin/src/lcd/extui/ftdi_eve_touch_ui/generic/change_filament_screen.cpp +++ b/Marlin/src/lcd/extui/ftdi_eve_touch_ui/generic/change_filament_screen.cpp @@ -171,9 +171,9 @@ void ChangeFilamentScreen::onRedraw(draw_mode_t what) { const bool t_ok = getActualTemp_celsius(e) > getSoftenTemp() - 10; - if (mydata.t_tag && !t_ok) { + if (mydata.t_tag && !t_ok) cmd.text(HEATING_LBL_POS, GET_TEXT_F(MSG_HEATING)); - } else if (getActualTemp_celsius(e) > 100) { + else if (getActualTemp_celsius(e) > 100) { cmd.cmd(COLOR_RGB(0xFF0000)) .text(CAUTION_LBL_POS, GET_TEXT_F(MSG_CAUTION)) .colors(normal_btn) diff --git a/Marlin/src/lcd/extui/ftdi_eve_touch_ui/generic/files_screen.cpp b/Marlin/src/lcd/extui/ftdi_eve_touch_ui/generic/files_screen.cpp index 00768dbaf7..290c20f43e 100644 --- a/Marlin/src/lcd/extui/ftdi_eve_touch_ui/generic/files_screen.cpp +++ b/Marlin/src/lcd/extui/ftdi_eve_touch_ui/generic/files_screen.cpp @@ -111,16 +111,17 @@ void FilesScreen::drawFileButton(int x, int y, int w, int h, const char *filenam cmd.cmd(COLOR_RGB(is_highlighted ? fg_action : bg_color)); cmd.font(font_medium).rectangle(bx, by, bw, bh); cmd.cmd(COLOR_RGB(is_highlighted ? normal_btn.rgb : bg_text_enabled)); - #if ENABLED(SCROLL_LONG_FILENAMES) - if (is_highlighted) { + if (TERN0(SCROLL_LONG_FILENAMES, is_highlighted)) { + #if ENABLED(SCROLL_LONG_FILENAMES) cmd.cmd(SAVE_CONTEXT()); cmd.cmd(SCISSOR_XY(x,y)); cmd.cmd(SCISSOR_SIZE(w,h)); cmd.cmd(MACRO(0)); cmd.text(bx, by, bw, bh, filename, OPT_CENTERY | OPT_NOFIT); - } else - #endif - draw_text_with_ellipsis(cmd, bx,by, bw - (is_dir ? 20 : 0), bh, filename, OPT_CENTERY, font_medium); + #endif + } + else + draw_text_with_ellipsis(cmd, bx,by, bw - (is_dir ? 20 : 0), bh, filename, OPT_CENTERY, font_medium); if (is_dir && !is_highlighted) cmd.text(bx, by, bw, bh, F("> "), OPT_CENTERY | OPT_RIGHTX); #if ENABLED(SCROLL_LONG_FILENAMES) if (is_highlighted) cmd.cmd(RESTORE_CONTEXT()); diff --git a/Marlin/src/lcd/extui/mks_ui/wifiSerial_STM32.cpp b/Marlin/src/lcd/extui/mks_ui/wifiSerial_STM32.cpp index 6607e7531f..0e55b3448b 100644 --- a/Marlin/src/lcd/extui/mks_ui/wifiSerial_STM32.cpp +++ b/Marlin/src/lcd/extui/mks_ui/wifiSerial_STM32.cpp @@ -53,42 +53,45 @@ void WifiSerial::init(PinName _rx, PinName _tx) { WifiSerial::WifiSerial(void *peripheral) { // If PIN_SERIALy_RX is not defined assume half-duplex _serial.pin_rx = NC; + if (false) { + // for else if / else below... + } // If Serial is defined in variant set // the Rx/Tx pins for com port if defined #if defined(Serial) && defined(PIN_SERIAL_TX) - if ((void *)this == (void *)&Serial) { + else if ((void *)this == (void *)&Serial) { #ifdef PIN_SERIAL_RX setRx(PIN_SERIAL_RX); #endif setTx(PIN_SERIAL_TX); - } else + } #endif #if defined(PIN_SERIAL1_TX) && defined(USART1_BASE) - if (peripheral == USART1) { + else if (peripheral == USART1) { #ifdef PIN_SERIAL1_RX setRx(PIN_SERIAL1_RX); #endif setTx(PIN_SERIAL1_TX); - } else + } #endif #if defined(PIN_SERIAL2_TX) && defined(USART2_BASE) - if (peripheral == USART2) { + else if (peripheral == USART2) { #ifdef PIN_SERIAL2_RX setRx(PIN_SERIAL2_RX); #endif setTx(PIN_SERIAL2_TX); - } else + } #endif #if defined(PIN_SERIAL3_TX) && defined(USART3_BASE) - if (peripheral == USART3) { + else if (peripheral == USART3) { #ifdef PIN_SERIAL3_RX setRx(PIN_SERIAL3_RX); #endif setTx(PIN_SERIAL3_TX); - } else + } #endif #ifdef PIN_SERIAL4_TX - if (false + else if (false #ifdef USART4_BASE || peripheral == USART4 #elif defined(UART4_BASE) @@ -99,10 +102,10 @@ WifiSerial::WifiSerial(void *peripheral) { setRx(PIN_SERIAL4_RX); #endif setTx(PIN_SERIAL4_TX); - } else + } #endif #ifdef PIN_SERIAL5_TX - if (false + else if (false #ifdef USART5_BASE || peripheral == USART5 #elif defined(UART5_BASE) @@ -113,18 +116,18 @@ WifiSerial::WifiSerial(void *peripheral) { setRx(PIN_SERIAL5_RX); #endif setTx(PIN_SERIAL5_TX); - } else + } #endif #if defined(PIN_SERIAL6_TX) && defined(USART6_BASE) - if (peripheral == USART6) { + else if (peripheral == USART6) { #ifdef PIN_SERIAL6_RX setRx(PIN_SERIAL6_RX); #endif setTx(PIN_SERIAL6_TX); - } else + } #endif #ifdef PIN_SERIAL7_TX - if (false + else if (false #ifdef USART7_BASE || peripheral == USART7 #elif defined(UART7_BASE) @@ -135,10 +138,10 @@ WifiSerial::WifiSerial(void *peripheral) { setRx(PIN_SERIAL7_RX); #endif setTx(PIN_SERIAL7_TX); - } else + } #endif #ifdef PIN_SERIAL8_TX - if (false + else if (false #ifdef USART8_BASE || peripheral == USART8 #elif defined(UART8_BASE) @@ -149,18 +152,18 @@ WifiSerial::WifiSerial(void *peripheral) { setRx(PIN_SERIAL8_RX); #endif setTx(PIN_SERIAL8_TX); - } else + } #endif #if defined(PIN_SERIAL9_TX) && defined(UART9_BASE) - if (peripheral == UART9) { + else if (peripheral == UART9) { #ifdef PIN_SERIAL9_RX setRx(PIN_SERIAL9_RX); #endif setTx(PIN_SERIAL9_TX); - } else + } #endif #ifdef PIN_SERIAL10_TX - if (false + else if (false #ifdef USART10_BASE || peripheral == USART10 #elif defined(UART10_BASE) @@ -171,18 +174,18 @@ WifiSerial::WifiSerial(void *peripheral) { setRx(PIN_SERIAL10_RX); #endif setTx(PIN_SERIAL10_TX); - } else + } #endif #if defined(PIN_SERIALLP1_TX) && defined(LPUART1_BASE) - if (peripheral == LPUART1) { + else if (peripheral == LPUART1) { #ifdef PIN_SERIALLP1_RX setRx(PIN_SERIALLP1_RX); #endif setTx(PIN_SERIALLP1_TX); - } else + } #endif // else get the pins of the first peripheral occurrence in PinMap - { + else { _serial.pin_rx = pinmap_pin(peripheral, PinMap_UART_RX); _serial.pin_tx = pinmap_pin(peripheral, PinMap_UART_TX); }