Merge pull request #11551 from thinkyhead/bf2_trinamic_fixes
[2.0.x] Fix TMC2208 SW serial communication
This commit is contained in:
commit
952a1bc9d5
@ -552,9 +552,12 @@
|
|||||||
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe.
|
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe.
|
||||||
|
|
||||||
/**
|
/**
|
||||||
* Specify Stepper Driver types
|
* Stepper Drivers
|
||||||
* The options are used to determine driver pulse timings as well as more advanced functionality.
|
*
|
||||||
* Stepper timing options can be overridden in Configuration_adv.h
|
* These settings allow Marlin to tune stepper driver timing and enable advanced options for
|
||||||
|
* stepper drivers that support them. You may also override timing options in Configuration_adv.h.
|
||||||
|
*
|
||||||
|
* A4988 is assumed for unspecified drivers.
|
||||||
*
|
*
|
||||||
* Options: A4988, A5984, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
|
* Options: A4988, A5984, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
|
||||||
* TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
|
* TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
|
||||||
@ -562,17 +565,17 @@
|
|||||||
* TMC5130, TMC5130_STANDALONE
|
* TMC5130, TMC5130_STANDALONE
|
||||||
* :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
|
* :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
|
||||||
*/
|
*/
|
||||||
#define X_DRIVER_TYPE A4988
|
//#define X_DRIVER_TYPE A4988
|
||||||
#define Y_DRIVER_TYPE A4988
|
//#define Y_DRIVER_TYPE A4988
|
||||||
#define Z_DRIVER_TYPE A4988
|
//#define Z_DRIVER_TYPE A4988
|
||||||
#define X2_DRIVER_TYPE A4988
|
//#define X2_DRIVER_TYPE A4988
|
||||||
#define Y2_DRIVER_TYPE A4988
|
//#define Y2_DRIVER_TYPE A4988
|
||||||
#define Z2_DRIVER_TYPE A4988
|
//#define Z2_DRIVER_TYPE A4988
|
||||||
#define E0_DRIVER_TYPE A4988
|
//#define E0_DRIVER_TYPE A4988
|
||||||
#define E1_DRIVER_TYPE A4988
|
//#define E1_DRIVER_TYPE A4988
|
||||||
#define E2_DRIVER_TYPE A4988
|
//#define E2_DRIVER_TYPE A4988
|
||||||
#define E3_DRIVER_TYPE A4988
|
//#define E3_DRIVER_TYPE A4988
|
||||||
#define E4_DRIVER_TYPE A4988
|
//#define E4_DRIVER_TYPE A4988
|
||||||
|
|
||||||
// Enable this feature if all enabled endstop pins are interrupt-capable.
|
// Enable this feature if all enabled endstop pins are interrupt-capable.
|
||||||
// This will remove the need to poll the interrupt pins, saving many CPU cycles.
|
// This will remove the need to poll the interrupt pins, saving many CPU cycles.
|
||||||
|
@ -552,9 +552,12 @@
|
|||||||
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe.
|
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe.
|
||||||
|
|
||||||
/**
|
/**
|
||||||
* Specify Stepper Driver types
|
* Stepper Drivers
|
||||||
* The options are used to determine driver pulse timings as well as more advanced functionality.
|
*
|
||||||
* Stepper timing options can be overridden in Configuration_adv.h
|
* These settings allow Marlin to tune stepper driver timing and enable advanced options for
|
||||||
|
* stepper drivers that support them. You may also override timing options in Configuration_adv.h.
|
||||||
|
*
|
||||||
|
* A4988 is assumed for unspecified drivers.
|
||||||
*
|
*
|
||||||
* Options: A4988, A5984, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
|
* Options: A4988, A5984, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
|
||||||
* TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
|
* TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
|
||||||
@ -562,17 +565,17 @@
|
|||||||
* TMC5130, TMC5130_STANDALONE
|
* TMC5130, TMC5130_STANDALONE
|
||||||
* :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
|
* :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
|
||||||
*/
|
*/
|
||||||
#define X_DRIVER_TYPE A4988
|
//#define X_DRIVER_TYPE A4988
|
||||||
#define Y_DRIVER_TYPE A4988
|
//#define Y_DRIVER_TYPE A4988
|
||||||
#define Z_DRIVER_TYPE A4988
|
//#define Z_DRIVER_TYPE A4988
|
||||||
#define X2_DRIVER_TYPE A4988
|
//#define X2_DRIVER_TYPE A4988
|
||||||
#define Y2_DRIVER_TYPE A4988
|
//#define Y2_DRIVER_TYPE A4988
|
||||||
#define Z2_DRIVER_TYPE A4988
|
//#define Z2_DRIVER_TYPE A4988
|
||||||
#define E0_DRIVER_TYPE A4988
|
//#define E0_DRIVER_TYPE A4988
|
||||||
#define E1_DRIVER_TYPE A4988
|
//#define E1_DRIVER_TYPE A4988
|
||||||
#define E2_DRIVER_TYPE A4988
|
//#define E2_DRIVER_TYPE A4988
|
||||||
#define E3_DRIVER_TYPE A4988
|
//#define E3_DRIVER_TYPE A4988
|
||||||
#define E4_DRIVER_TYPE A4988
|
//#define E4_DRIVER_TYPE A4988
|
||||||
|
|
||||||
// Enable this feature if all enabled endstop pins are interrupt-capable.
|
// Enable this feature if all enabled endstop pins are interrupt-capable.
|
||||||
// This will remove the need to poll the interrupt pins, saving many CPU cycles.
|
// This will remove the need to poll the interrupt pins, saving many CPU cycles.
|
||||||
|
@ -552,9 +552,12 @@
|
|||||||
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe.
|
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe.
|
||||||
|
|
||||||
/**
|
/**
|
||||||
* Specify Stepper Driver types
|
* Stepper Drivers
|
||||||
* The options are used to determine driver pulse timings as well as more advanced functionality.
|
*
|
||||||
* Stepper timing options can be overridden in Configuration_adv.h
|
* These settings allow Marlin to tune stepper driver timing and enable advanced options for
|
||||||
|
* stepper drivers that support them. You may also override timing options in Configuration_adv.h.
|
||||||
|
*
|
||||||
|
* A4988 is assumed for unspecified drivers.
|
||||||
*
|
*
|
||||||
* Options: A4988, A5984, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
|
* Options: A4988, A5984, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
|
||||||
* TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
|
* TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
|
||||||
@ -562,17 +565,17 @@
|
|||||||
* TMC5130, TMC5130_STANDALONE
|
* TMC5130, TMC5130_STANDALONE
|
||||||
* :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
|
* :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
|
||||||
*/
|
*/
|
||||||
#define X_DRIVER_TYPE A4988
|
//#define X_DRIVER_TYPE A4988
|
||||||
#define Y_DRIVER_TYPE A4988
|
//#define Y_DRIVER_TYPE A4988
|
||||||
#define Z_DRIVER_TYPE A4988
|
//#define Z_DRIVER_TYPE A4988
|
||||||
#define X2_DRIVER_TYPE A4988
|
//#define X2_DRIVER_TYPE A4988
|
||||||
#define Y2_DRIVER_TYPE A4988
|
//#define Y2_DRIVER_TYPE A4988
|
||||||
#define Z2_DRIVER_TYPE A4988
|
//#define Z2_DRIVER_TYPE A4988
|
||||||
#define E0_DRIVER_TYPE A4988
|
//#define E0_DRIVER_TYPE A4988
|
||||||
#define E1_DRIVER_TYPE A4988
|
//#define E1_DRIVER_TYPE A4988
|
||||||
#define E2_DRIVER_TYPE A4988
|
//#define E2_DRIVER_TYPE A4988
|
||||||
#define E3_DRIVER_TYPE A4988
|
//#define E3_DRIVER_TYPE A4988
|
||||||
#define E4_DRIVER_TYPE A4988
|
//#define E4_DRIVER_TYPE A4988
|
||||||
|
|
||||||
// Enable this feature if all enabled endstop pins are interrupt-capable.
|
// Enable this feature if all enabled endstop pins are interrupt-capable.
|
||||||
// This will remove the need to poll the interrupt pins, saving many CPU cycles.
|
// This will remove the need to poll the interrupt pins, saving many CPU cycles.
|
||||||
|
@ -572,9 +572,12 @@
|
|||||||
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe.
|
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe.
|
||||||
|
|
||||||
/**
|
/**
|
||||||
* Specify Stepper Driver types
|
* Stepper Drivers
|
||||||
* The options are used to determine driver pulse timings as well as more advanced functionality.
|
*
|
||||||
* Stepper timing options can be overridden in Configuration_adv.h
|
* These settings allow Marlin to tune stepper driver timing and enable advanced options for
|
||||||
|
* stepper drivers that support them. You may also override timing options in Configuration_adv.h.
|
||||||
|
*
|
||||||
|
* A4988 is assumed for unspecified drivers.
|
||||||
*
|
*
|
||||||
* Options: A4988, A5984, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
|
* Options: A4988, A5984, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
|
||||||
* TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
|
* TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
|
||||||
@ -582,17 +585,17 @@
|
|||||||
* TMC5130, TMC5130_STANDALONE
|
* TMC5130, TMC5130_STANDALONE
|
||||||
* :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
|
* :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
|
||||||
*/
|
*/
|
||||||
#define X_DRIVER_TYPE A4988
|
//#define X_DRIVER_TYPE A4988
|
||||||
#define Y_DRIVER_TYPE A4988
|
//#define Y_DRIVER_TYPE A4988
|
||||||
#define Z_DRIVER_TYPE A4988
|
//#define Z_DRIVER_TYPE A4988
|
||||||
#define X2_DRIVER_TYPE A4988
|
//#define X2_DRIVER_TYPE A4988
|
||||||
#define Y2_DRIVER_TYPE A4988
|
//#define Y2_DRIVER_TYPE A4988
|
||||||
#define Z2_DRIVER_TYPE A4988
|
//#define Z2_DRIVER_TYPE A4988
|
||||||
#define E0_DRIVER_TYPE A4988
|
//#define E0_DRIVER_TYPE A4988
|
||||||
#define E1_DRIVER_TYPE A4988
|
//#define E1_DRIVER_TYPE A4988
|
||||||
#define E2_DRIVER_TYPE A4988
|
//#define E2_DRIVER_TYPE A4988
|
||||||
#define E3_DRIVER_TYPE A4988
|
//#define E3_DRIVER_TYPE A4988
|
||||||
#define E4_DRIVER_TYPE A4988
|
//#define E4_DRIVER_TYPE A4988
|
||||||
|
|
||||||
// Enable this feature if all enabled endstop pins are interrupt-capable.
|
// Enable this feature if all enabled endstop pins are interrupt-capable.
|
||||||
// This will remove the need to poll the interrupt pins, saving many CPU cycles.
|
// This will remove the need to poll the interrupt pins, saving many CPU cycles.
|
||||||
|
@ -552,9 +552,12 @@
|
|||||||
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe.
|
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe.
|
||||||
|
|
||||||
/**
|
/**
|
||||||
* Specify Stepper Driver types
|
* Stepper Drivers
|
||||||
* The options are used to determine driver pulse timings as well as more advanced functionality.
|
*
|
||||||
* Stepper timing options can be overridden in Configuration_adv.h
|
* These settings allow Marlin to tune stepper driver timing and enable advanced options for
|
||||||
|
* stepper drivers that support them. You may also override timing options in Configuration_adv.h.
|
||||||
|
*
|
||||||
|
* A4988 is assumed for unspecified drivers.
|
||||||
*
|
*
|
||||||
* Options: A4988, A5984, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
|
* Options: A4988, A5984, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
|
||||||
* TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
|
* TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
|
||||||
@ -562,17 +565,17 @@
|
|||||||
* TMC5130, TMC5130_STANDALONE
|
* TMC5130, TMC5130_STANDALONE
|
||||||
* :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
|
* :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
|
||||||
*/
|
*/
|
||||||
#define X_DRIVER_TYPE A4988
|
//#define X_DRIVER_TYPE A4988
|
||||||
#define Y_DRIVER_TYPE A4988
|
//#define Y_DRIVER_TYPE A4988
|
||||||
#define Z_DRIVER_TYPE A4988
|
//#define Z_DRIVER_TYPE A4988
|
||||||
#define X2_DRIVER_TYPE A4988
|
//#define X2_DRIVER_TYPE A4988
|
||||||
#define Y2_DRIVER_TYPE A4988
|
//#define Y2_DRIVER_TYPE A4988
|
||||||
#define Z2_DRIVER_TYPE A4988
|
//#define Z2_DRIVER_TYPE A4988
|
||||||
#define E0_DRIVER_TYPE A4988
|
//#define E0_DRIVER_TYPE A4988
|
||||||
#define E1_DRIVER_TYPE A4988
|
//#define E1_DRIVER_TYPE A4988
|
||||||
#define E2_DRIVER_TYPE A4988
|
//#define E2_DRIVER_TYPE A4988
|
||||||
#define E3_DRIVER_TYPE A4988
|
//#define E3_DRIVER_TYPE A4988
|
||||||
#define E4_DRIVER_TYPE A4988
|
//#define E4_DRIVER_TYPE A4988
|
||||||
|
|
||||||
// Enable this feature if all enabled endstop pins are interrupt-capable.
|
// Enable this feature if all enabled endstop pins are interrupt-capable.
|
||||||
// This will remove the need to poll the interrupt pins, saving many CPU cycles.
|
// This will remove the need to poll the interrupt pins, saving many CPU cycles.
|
||||||
|
@ -553,9 +553,12 @@
|
|||||||
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe.
|
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe.
|
||||||
|
|
||||||
/**
|
/**
|
||||||
* Specify Stepper Driver types
|
* Stepper Drivers
|
||||||
* The options are used to determine driver pulse timings as well as more advanced functionality.
|
*
|
||||||
* Stepper timing options can be overridden in Configuration_adv.h
|
* These settings allow Marlin to tune stepper driver timing and enable advanced options for
|
||||||
|
* stepper drivers that support them. You may also override timing options in Configuration_adv.h.
|
||||||
|
*
|
||||||
|
* A4988 is assumed for unspecified drivers.
|
||||||
*
|
*
|
||||||
* Options: A4988, A5984, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
|
* Options: A4988, A5984, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
|
||||||
* TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
|
* TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
|
||||||
@ -563,17 +566,17 @@
|
|||||||
* TMC5130, TMC5130_STANDALONE
|
* TMC5130, TMC5130_STANDALONE
|
||||||
* :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
|
* :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
|
||||||
*/
|
*/
|
||||||
#define X_DRIVER_TYPE A4988
|
//#define X_DRIVER_TYPE A4988
|
||||||
#define Y_DRIVER_TYPE A4988
|
//#define Y_DRIVER_TYPE A4988
|
||||||
#define Z_DRIVER_TYPE A4988
|
//#define Z_DRIVER_TYPE A4988
|
||||||
#define X2_DRIVER_TYPE A4988
|
//#define X2_DRIVER_TYPE A4988
|
||||||
#define Y2_DRIVER_TYPE A4988
|
//#define Y2_DRIVER_TYPE A4988
|
||||||
#define Z2_DRIVER_TYPE A4988
|
//#define Z2_DRIVER_TYPE A4988
|
||||||
#define E0_DRIVER_TYPE A4988
|
//#define E0_DRIVER_TYPE A4988
|
||||||
#define E1_DRIVER_TYPE A4988
|
//#define E1_DRIVER_TYPE A4988
|
||||||
#define E2_DRIVER_TYPE A4988
|
//#define E2_DRIVER_TYPE A4988
|
||||||
#define E3_DRIVER_TYPE A4988
|
//#define E3_DRIVER_TYPE A4988
|
||||||
#define E4_DRIVER_TYPE A4988
|
//#define E4_DRIVER_TYPE A4988
|
||||||
|
|
||||||
// Enable this feature if all enabled endstop pins are interrupt-capable.
|
// Enable this feature if all enabled endstop pins are interrupt-capable.
|
||||||
// This will remove the need to poll the interrupt pins, saving many CPU cycles.
|
// This will remove the need to poll the interrupt pins, saving many CPU cycles.
|
||||||
|
@ -562,9 +562,12 @@
|
|||||||
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe.
|
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe.
|
||||||
|
|
||||||
/**
|
/**
|
||||||
* Specify Stepper Driver types
|
* Stepper Drivers
|
||||||
* The options are used to determine driver pulse timings as well as more advanced functionality.
|
*
|
||||||
* Stepper timing options can be overridden in Configuration_adv.h
|
* These settings allow Marlin to tune stepper driver timing and enable advanced options for
|
||||||
|
* stepper drivers that support them. You may also override timing options in Configuration_adv.h.
|
||||||
|
*
|
||||||
|
* A4988 is assumed for unspecified drivers.
|
||||||
*
|
*
|
||||||
* Options: A4988, A5984, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
|
* Options: A4988, A5984, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
|
||||||
* TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
|
* TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
|
||||||
@ -572,17 +575,17 @@
|
|||||||
* TMC5130, TMC5130_STANDALONE
|
* TMC5130, TMC5130_STANDALONE
|
||||||
* :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
|
* :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
|
||||||
*/
|
*/
|
||||||
#define X_DRIVER_TYPE A4988
|
//#define X_DRIVER_TYPE A4988
|
||||||
#define Y_DRIVER_TYPE A4988
|
//#define Y_DRIVER_TYPE A4988
|
||||||
#define Z_DRIVER_TYPE A4988
|
//#define Z_DRIVER_TYPE A4988
|
||||||
#define X2_DRIVER_TYPE A4988
|
//#define X2_DRIVER_TYPE A4988
|
||||||
#define Y2_DRIVER_TYPE A4988
|
//#define Y2_DRIVER_TYPE A4988
|
||||||
#define Z2_DRIVER_TYPE A4988
|
//#define Z2_DRIVER_TYPE A4988
|
||||||
#define E0_DRIVER_TYPE A4988
|
//#define E0_DRIVER_TYPE A4988
|
||||||
#define E1_DRIVER_TYPE A4988
|
//#define E1_DRIVER_TYPE A4988
|
||||||
#define E2_DRIVER_TYPE A4988
|
//#define E2_DRIVER_TYPE A4988
|
||||||
#define E3_DRIVER_TYPE A4988
|
//#define E3_DRIVER_TYPE A4988
|
||||||
#define E4_DRIVER_TYPE A4988
|
//#define E4_DRIVER_TYPE A4988
|
||||||
|
|
||||||
// Enable this feature if all enabled endstop pins are interrupt-capable.
|
// Enable this feature if all enabled endstop pins are interrupt-capable.
|
||||||
// This will remove the need to poll the interrupt pins, saving many CPU cycles.
|
// This will remove the need to poll the interrupt pins, saving many CPU cycles.
|
||||||
|
@ -556,9 +556,12 @@
|
|||||||
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe.
|
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe.
|
||||||
|
|
||||||
/**
|
/**
|
||||||
* Specify Stepper Driver types
|
* Stepper Drivers
|
||||||
* The options are used to determine driver pulse timings as well as more advanced functionality.
|
*
|
||||||
* Stepper timing options can be overridden in Configuration_adv.h
|
* These settings allow Marlin to tune stepper driver timing and enable advanced options for
|
||||||
|
* stepper drivers that support them. You may also override timing options in Configuration_adv.h.
|
||||||
|
*
|
||||||
|
* A4988 is assumed for unspecified drivers.
|
||||||
*
|
*
|
||||||
* Options: A4988, A5984, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
|
* Options: A4988, A5984, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
|
||||||
* TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
|
* TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
|
||||||
@ -566,17 +569,17 @@
|
|||||||
* TMC5130, TMC5130_STANDALONE
|
* TMC5130, TMC5130_STANDALONE
|
||||||
* :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
|
* :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
|
||||||
*/
|
*/
|
||||||
#define X_DRIVER_TYPE A4988
|
//#define X_DRIVER_TYPE A4988
|
||||||
#define Y_DRIVER_TYPE A4988
|
//#define Y_DRIVER_TYPE A4988
|
||||||
#define Z_DRIVER_TYPE A4988
|
//#define Z_DRIVER_TYPE A4988
|
||||||
#define X2_DRIVER_TYPE A4988
|
//#define X2_DRIVER_TYPE A4988
|
||||||
#define Y2_DRIVER_TYPE A4988
|
//#define Y2_DRIVER_TYPE A4988
|
||||||
#define Z2_DRIVER_TYPE A4988
|
//#define Z2_DRIVER_TYPE A4988
|
||||||
#define E0_DRIVER_TYPE A4988
|
//#define E0_DRIVER_TYPE A4988
|
||||||
#define E1_DRIVER_TYPE A4988
|
//#define E1_DRIVER_TYPE A4988
|
||||||
#define E2_DRIVER_TYPE A4988
|
//#define E2_DRIVER_TYPE A4988
|
||||||
#define E3_DRIVER_TYPE A4988
|
//#define E3_DRIVER_TYPE A4988
|
||||||
#define E4_DRIVER_TYPE A4988
|
//#define E4_DRIVER_TYPE A4988
|
||||||
|
|
||||||
// Enable this feature if all enabled endstop pins are interrupt-capable.
|
// Enable this feature if all enabled endstop pins are interrupt-capable.
|
||||||
// This will remove the need to poll the interrupt pins, saving many CPU cycles.
|
// This will remove the need to poll the interrupt pins, saving many CPU cycles.
|
||||||
|
@ -571,9 +571,12 @@
|
|||||||
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe.
|
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe.
|
||||||
|
|
||||||
/**
|
/**
|
||||||
* Specify Stepper Driver types
|
* Stepper Drivers
|
||||||
* The options are used to determine driver pulse timings as well as more advanced functionality.
|
*
|
||||||
* Stepper timing options can be overridden in Configuration_adv.h
|
* These settings allow Marlin to tune stepper driver timing and enable advanced options for
|
||||||
|
* stepper drivers that support them. You may also override timing options in Configuration_adv.h.
|
||||||
|
*
|
||||||
|
* A4988 is assumed for unspecified drivers.
|
||||||
*
|
*
|
||||||
* Options: A4988, A5984, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
|
* Options: A4988, A5984, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
|
||||||
* TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
|
* TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
|
||||||
@ -581,17 +584,17 @@
|
|||||||
* TMC5130, TMC5130_STANDALONE
|
* TMC5130, TMC5130_STANDALONE
|
||||||
* :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
|
* :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
|
||||||
*/
|
*/
|
||||||
#define X_DRIVER_TYPE A4988
|
//#define X_DRIVER_TYPE A4988
|
||||||
#define Y_DRIVER_TYPE A4988
|
//#define Y_DRIVER_TYPE A4988
|
||||||
#define Z_DRIVER_TYPE A4988
|
//#define Z_DRIVER_TYPE A4988
|
||||||
#define X2_DRIVER_TYPE A4988
|
//#define X2_DRIVER_TYPE A4988
|
||||||
#define Y2_DRIVER_TYPE A4988
|
//#define Y2_DRIVER_TYPE A4988
|
||||||
#define Z2_DRIVER_TYPE A4988
|
//#define Z2_DRIVER_TYPE A4988
|
||||||
#define E0_DRIVER_TYPE A4988
|
//#define E0_DRIVER_TYPE A4988
|
||||||
#define E1_DRIVER_TYPE A4988
|
//#define E1_DRIVER_TYPE A4988
|
||||||
#define E2_DRIVER_TYPE A4988
|
//#define E2_DRIVER_TYPE A4988
|
||||||
#define E3_DRIVER_TYPE A4988
|
//#define E3_DRIVER_TYPE A4988
|
||||||
#define E4_DRIVER_TYPE A4988
|
//#define E4_DRIVER_TYPE A4988
|
||||||
|
|
||||||
// Enable this feature if all enabled endstop pins are interrupt-capable.
|
// Enable this feature if all enabled endstop pins are interrupt-capable.
|
||||||
// This will remove the need to poll the interrupt pins, saving many CPU cycles.
|
// This will remove the need to poll the interrupt pins, saving many CPU cycles.
|
||||||
|
@ -562,9 +562,12 @@
|
|||||||
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe.
|
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe.
|
||||||
|
|
||||||
/**
|
/**
|
||||||
* Specify Stepper Driver types
|
* Stepper Drivers
|
||||||
* The options are used to determine driver pulse timings as well as more advanced functionality.
|
*
|
||||||
* Stepper timing options can be overridden in Configuration_adv.h
|
* These settings allow Marlin to tune stepper driver timing and enable advanced options for
|
||||||
|
* stepper drivers that support them. You may also override timing options in Configuration_adv.h.
|
||||||
|
*
|
||||||
|
* A4988 is assumed for unspecified drivers.
|
||||||
*
|
*
|
||||||
* Options: A4988, A5984, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
|
* Options: A4988, A5984, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
|
||||||
* TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
|
* TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
|
||||||
@ -572,17 +575,17 @@
|
|||||||
* TMC5130, TMC5130_STANDALONE
|
* TMC5130, TMC5130_STANDALONE
|
||||||
* :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
|
* :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
|
||||||
*/
|
*/
|
||||||
#define X_DRIVER_TYPE A4988
|
//#define X_DRIVER_TYPE A4988
|
||||||
#define Y_DRIVER_TYPE A4988
|
//#define Y_DRIVER_TYPE A4988
|
||||||
#define Z_DRIVER_TYPE A4988
|
//#define Z_DRIVER_TYPE A4988
|
||||||
#define X2_DRIVER_TYPE A4988
|
//#define X2_DRIVER_TYPE A4988
|
||||||
#define Y2_DRIVER_TYPE A4988
|
//#define Y2_DRIVER_TYPE A4988
|
||||||
#define Z2_DRIVER_TYPE A4988
|
//#define Z2_DRIVER_TYPE A4988
|
||||||
#define E0_DRIVER_TYPE A4988
|
//#define E0_DRIVER_TYPE A4988
|
||||||
#define E1_DRIVER_TYPE A4988
|
//#define E1_DRIVER_TYPE A4988
|
||||||
#define E2_DRIVER_TYPE A4988
|
//#define E2_DRIVER_TYPE A4988
|
||||||
#define E3_DRIVER_TYPE A4988
|
//#define E3_DRIVER_TYPE A4988
|
||||||
#define E4_DRIVER_TYPE A4988
|
//#define E4_DRIVER_TYPE A4988
|
||||||
|
|
||||||
// Enable this feature if all enabled endstop pins are interrupt-capable.
|
// Enable this feature if all enabled endstop pins are interrupt-capable.
|
||||||
// This will remove the need to poll the interrupt pins, saving many CPU cycles.
|
// This will remove the need to poll the interrupt pins, saving many CPU cycles.
|
||||||
|
@ -556,9 +556,12 @@
|
|||||||
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe.
|
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe.
|
||||||
|
|
||||||
/**
|
/**
|
||||||
* Specify Stepper Driver types
|
* Stepper Drivers
|
||||||
* The options are used to determine driver pulse timings as well as more advanced functionality.
|
*
|
||||||
* Stepper timing options can be overridden in Configuration_adv.h
|
* These settings allow Marlin to tune stepper driver timing and enable advanced options for
|
||||||
|
* stepper drivers that support them. You may also override timing options in Configuration_adv.h.
|
||||||
|
*
|
||||||
|
* A4988 is assumed for unspecified drivers.
|
||||||
*
|
*
|
||||||
* Options: A4988, A5984, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
|
* Options: A4988, A5984, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
|
||||||
* TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
|
* TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
|
||||||
@ -566,17 +569,17 @@
|
|||||||
* TMC5130, TMC5130_STANDALONE
|
* TMC5130, TMC5130_STANDALONE
|
||||||
* :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
|
* :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
|
||||||
*/
|
*/
|
||||||
#define X_DRIVER_TYPE A4988
|
//#define X_DRIVER_TYPE A4988
|
||||||
#define Y_DRIVER_TYPE A4988
|
//#define Y_DRIVER_TYPE A4988
|
||||||
#define Z_DRIVER_TYPE A4988
|
//#define Z_DRIVER_TYPE A4988
|
||||||
#define X2_DRIVER_TYPE A4988
|
//#define X2_DRIVER_TYPE A4988
|
||||||
#define Y2_DRIVER_TYPE A4988
|
//#define Y2_DRIVER_TYPE A4988
|
||||||
#define Z2_DRIVER_TYPE A4988
|
//#define Z2_DRIVER_TYPE A4988
|
||||||
#define E0_DRIVER_TYPE A4988
|
//#define E0_DRIVER_TYPE A4988
|
||||||
#define E1_DRIVER_TYPE A4988
|
//#define E1_DRIVER_TYPE A4988
|
||||||
#define E2_DRIVER_TYPE A4988
|
//#define E2_DRIVER_TYPE A4988
|
||||||
#define E3_DRIVER_TYPE A4988
|
//#define E3_DRIVER_TYPE A4988
|
||||||
#define E4_DRIVER_TYPE A4988
|
//#define E4_DRIVER_TYPE A4988
|
||||||
|
|
||||||
// Enable this feature if all enabled endstop pins are interrupt-capable.
|
// Enable this feature if all enabled endstop pins are interrupt-capable.
|
||||||
// This will remove the need to poll the interrupt pins, saving many CPU cycles.
|
// This will remove the need to poll the interrupt pins, saving many CPU cycles.
|
||||||
|
@ -556,9 +556,12 @@
|
|||||||
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe.
|
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe.
|
||||||
|
|
||||||
/**
|
/**
|
||||||
* Specify Stepper Driver types
|
* Stepper Drivers
|
||||||
* The options are used to determine driver pulse timings as well as more advanced functionality.
|
*
|
||||||
* Stepper timing options can be overridden in Configuration_adv.h
|
* These settings allow Marlin to tune stepper driver timing and enable advanced options for
|
||||||
|
* stepper drivers that support them. You may also override timing options in Configuration_adv.h.
|
||||||
|
*
|
||||||
|
* A4988 is assumed for unspecified drivers.
|
||||||
*
|
*
|
||||||
* Options: A4988, A5984, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
|
* Options: A4988, A5984, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
|
||||||
* TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
|
* TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
|
||||||
@ -566,17 +569,17 @@
|
|||||||
* TMC5130, TMC5130_STANDALONE
|
* TMC5130, TMC5130_STANDALONE
|
||||||
* :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
|
* :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
|
||||||
*/
|
*/
|
||||||
#define X_DRIVER_TYPE A4988
|
//#define X_DRIVER_TYPE A4988
|
||||||
#define Y_DRIVER_TYPE A4988
|
//#define Y_DRIVER_TYPE A4988
|
||||||
#define Z_DRIVER_TYPE A4988
|
//#define Z_DRIVER_TYPE A4988
|
||||||
#define X2_DRIVER_TYPE A4988
|
//#define X2_DRIVER_TYPE A4988
|
||||||
#define Y2_DRIVER_TYPE A4988
|
//#define Y2_DRIVER_TYPE A4988
|
||||||
#define Z2_DRIVER_TYPE A4988
|
//#define Z2_DRIVER_TYPE A4988
|
||||||
#define E0_DRIVER_TYPE A4988
|
//#define E0_DRIVER_TYPE A4988
|
||||||
#define E1_DRIVER_TYPE A4988
|
//#define E1_DRIVER_TYPE A4988
|
||||||
#define E2_DRIVER_TYPE A4988
|
//#define E2_DRIVER_TYPE A4988
|
||||||
#define E3_DRIVER_TYPE A4988
|
//#define E3_DRIVER_TYPE A4988
|
||||||
#define E4_DRIVER_TYPE A4988
|
//#define E4_DRIVER_TYPE A4988
|
||||||
|
|
||||||
// Enable this feature if all enabled endstop pins are interrupt-capable.
|
// Enable this feature if all enabled endstop pins are interrupt-capable.
|
||||||
// This will remove the need to poll the interrupt pins, saving many CPU cycles.
|
// This will remove the need to poll the interrupt pins, saving many CPU cycles.
|
||||||
|
@ -562,9 +562,12 @@
|
|||||||
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe.
|
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe.
|
||||||
|
|
||||||
/**
|
/**
|
||||||
* Specify Stepper Driver types
|
* Stepper Drivers
|
||||||
* The options are used to determine driver pulse timings as well as more advanced functionality.
|
*
|
||||||
* Stepper timing options can be overridden in Configuration_adv.h
|
* These settings allow Marlin to tune stepper driver timing and enable advanced options for
|
||||||
|
* stepper drivers that support them. You may also override timing options in Configuration_adv.h.
|
||||||
|
*
|
||||||
|
* A4988 is assumed for unspecified drivers.
|
||||||
*
|
*
|
||||||
* Options: A4988, A5984, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
|
* Options: A4988, A5984, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
|
||||||
* TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
|
* TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
|
||||||
@ -572,17 +575,17 @@
|
|||||||
* TMC5130, TMC5130_STANDALONE
|
* TMC5130, TMC5130_STANDALONE
|
||||||
* :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
|
* :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
|
||||||
*/
|
*/
|
||||||
#define X_DRIVER_TYPE A4988
|
//#define X_DRIVER_TYPE A4988
|
||||||
#define Y_DRIVER_TYPE A4988
|
//#define Y_DRIVER_TYPE A4988
|
||||||
#define Z_DRIVER_TYPE A4988
|
//#define Z_DRIVER_TYPE A4988
|
||||||
#define X2_DRIVER_TYPE A4988
|
//#define X2_DRIVER_TYPE A4988
|
||||||
#define Y2_DRIVER_TYPE A4988
|
//#define Y2_DRIVER_TYPE A4988
|
||||||
#define Z2_DRIVER_TYPE A4988
|
//#define Z2_DRIVER_TYPE A4988
|
||||||
#define E0_DRIVER_TYPE A4988
|
//#define E0_DRIVER_TYPE A4988
|
||||||
#define E1_DRIVER_TYPE A4988
|
//#define E1_DRIVER_TYPE A4988
|
||||||
#define E2_DRIVER_TYPE A4988
|
//#define E2_DRIVER_TYPE A4988
|
||||||
#define E3_DRIVER_TYPE A4988
|
//#define E3_DRIVER_TYPE A4988
|
||||||
#define E4_DRIVER_TYPE A4988
|
//#define E4_DRIVER_TYPE A4988
|
||||||
|
|
||||||
// Enable this feature if all enabled endstop pins are interrupt-capable.
|
// Enable this feature if all enabled endstop pins are interrupt-capable.
|
||||||
// This will remove the need to poll the interrupt pins, saving many CPU cycles.
|
// This will remove the need to poll the interrupt pins, saving many CPU cycles.
|
||||||
|
@ -533,9 +533,12 @@
|
|||||||
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe.
|
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe.
|
||||||
|
|
||||||
/**
|
/**
|
||||||
* Specify Stepper Driver types
|
* Stepper Drivers
|
||||||
* The options are used to determine driver pulse timings as well as more advanced functionality.
|
*
|
||||||
* Stepper timing options can be overridden in Configuration_adv.h
|
* These settings allow Marlin to tune stepper driver timing and enable advanced options for
|
||||||
|
* stepper drivers that support them. You may also override timing options in Configuration_adv.h.
|
||||||
|
*
|
||||||
|
* A4988 is assumed for unspecified drivers.
|
||||||
*
|
*
|
||||||
* Options: A4988, A5984, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
|
* Options: A4988, A5984, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
|
||||||
* TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
|
* TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
|
||||||
@ -543,17 +546,17 @@
|
|||||||
* TMC5130, TMC5130_STANDALONE
|
* TMC5130, TMC5130_STANDALONE
|
||||||
* :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
|
* :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
|
||||||
*/
|
*/
|
||||||
#define X_DRIVER_TYPE A4988
|
//#define X_DRIVER_TYPE A4988
|
||||||
#define Y_DRIVER_TYPE A4988
|
//#define Y_DRIVER_TYPE A4988
|
||||||
#define Z_DRIVER_TYPE A4988
|
//#define Z_DRIVER_TYPE A4988
|
||||||
#define X2_DRIVER_TYPE A4988
|
//#define X2_DRIVER_TYPE A4988
|
||||||
#define Y2_DRIVER_TYPE A4988
|
//#define Y2_DRIVER_TYPE A4988
|
||||||
#define Z2_DRIVER_TYPE A4988
|
//#define Z2_DRIVER_TYPE A4988
|
||||||
#define E0_DRIVER_TYPE A4988
|
//#define E0_DRIVER_TYPE A4988
|
||||||
#define E1_DRIVER_TYPE A4988
|
//#define E1_DRIVER_TYPE A4988
|
||||||
#define E2_DRIVER_TYPE A4988
|
//#define E2_DRIVER_TYPE A4988
|
||||||
#define E3_DRIVER_TYPE A4988
|
//#define E3_DRIVER_TYPE A4988
|
||||||
#define E4_DRIVER_TYPE A4988
|
//#define E4_DRIVER_TYPE A4988
|
||||||
|
|
||||||
// Enable this feature if all enabled endstop pins are interrupt-capable.
|
// Enable this feature if all enabled endstop pins are interrupt-capable.
|
||||||
// This will remove the need to poll the interrupt pins, saving many CPU cycles.
|
// This will remove the need to poll the interrupt pins, saving many CPU cycles.
|
||||||
|
@ -533,9 +533,12 @@
|
|||||||
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe.
|
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe.
|
||||||
|
|
||||||
/**
|
/**
|
||||||
* Specify Stepper Driver types
|
* Stepper Drivers
|
||||||
* The options are used to determine driver pulse timings as well as more advanced functionality.
|
*
|
||||||
* Stepper timing options can be overridden in Configuration_adv.h
|
* These settings allow Marlin to tune stepper driver timing and enable advanced options for
|
||||||
|
* stepper drivers that support them. You may also override timing options in Configuration_adv.h.
|
||||||
|
*
|
||||||
|
* A4988 is assumed for unspecified drivers.
|
||||||
*
|
*
|
||||||
* Options: A4988, A5984, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
|
* Options: A4988, A5984, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
|
||||||
* TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
|
* TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
|
||||||
@ -543,17 +546,17 @@
|
|||||||
* TMC5130, TMC5130_STANDALONE
|
* TMC5130, TMC5130_STANDALONE
|
||||||
* :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
|
* :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
|
||||||
*/
|
*/
|
||||||
#define X_DRIVER_TYPE A4988
|
//#define X_DRIVER_TYPE A4988
|
||||||
#define Y_DRIVER_TYPE A4988
|
//#define Y_DRIVER_TYPE A4988
|
||||||
#define Z_DRIVER_TYPE A4988
|
//#define Z_DRIVER_TYPE A4988
|
||||||
#define X2_DRIVER_TYPE A4988
|
//#define X2_DRIVER_TYPE A4988
|
||||||
#define Y2_DRIVER_TYPE A4988
|
//#define Y2_DRIVER_TYPE A4988
|
||||||
#define Z2_DRIVER_TYPE A4988
|
//#define Z2_DRIVER_TYPE A4988
|
||||||
#define E0_DRIVER_TYPE A4988
|
//#define E0_DRIVER_TYPE A4988
|
||||||
#define E1_DRIVER_TYPE A4988
|
//#define E1_DRIVER_TYPE A4988
|
||||||
#define E2_DRIVER_TYPE A4988
|
//#define E2_DRIVER_TYPE A4988
|
||||||
#define E3_DRIVER_TYPE A4988
|
//#define E3_DRIVER_TYPE A4988
|
||||||
#define E4_DRIVER_TYPE A4988
|
//#define E4_DRIVER_TYPE A4988
|
||||||
|
|
||||||
// Enable this feature if all enabled endstop pins are interrupt-capable.
|
// Enable this feature if all enabled endstop pins are interrupt-capable.
|
||||||
// This will remove the need to poll the interrupt pins, saving many CPU cycles.
|
// This will remove the need to poll the interrupt pins, saving many CPU cycles.
|
||||||
|
@ -567,9 +567,12 @@
|
|||||||
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe.
|
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe.
|
||||||
|
|
||||||
/**
|
/**
|
||||||
* Specify Stepper Driver types
|
* Stepper Drivers
|
||||||
* The options are used to determine driver pulse timings as well as more advanced functionality.
|
*
|
||||||
* Stepper timing options can be overridden in Configuration_adv.h
|
* These settings allow Marlin to tune stepper driver timing and enable advanced options for
|
||||||
|
* stepper drivers that support them. You may also override timing options in Configuration_adv.h.
|
||||||
|
*
|
||||||
|
* A4988 is assumed for unspecified drivers.
|
||||||
*
|
*
|
||||||
* Options: A4988, A5984, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
|
* Options: A4988, A5984, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
|
||||||
* TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
|
* TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
|
||||||
@ -577,17 +580,17 @@
|
|||||||
* TMC5130, TMC5130_STANDALONE
|
* TMC5130, TMC5130_STANDALONE
|
||||||
* :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
|
* :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
|
||||||
*/
|
*/
|
||||||
#define X_DRIVER_TYPE A4988
|
//#define X_DRIVER_TYPE A4988
|
||||||
#define Y_DRIVER_TYPE A4988
|
//#define Y_DRIVER_TYPE A4988
|
||||||
#define Z_DRIVER_TYPE A4988
|
//#define Z_DRIVER_TYPE A4988
|
||||||
#define X2_DRIVER_TYPE A4988
|
//#define X2_DRIVER_TYPE A4988
|
||||||
#define Y2_DRIVER_TYPE A4988
|
//#define Y2_DRIVER_TYPE A4988
|
||||||
#define Z2_DRIVER_TYPE A4988
|
//#define Z2_DRIVER_TYPE A4988
|
||||||
#define E0_DRIVER_TYPE A4988
|
//#define E0_DRIVER_TYPE A4988
|
||||||
#define E1_DRIVER_TYPE A4988
|
//#define E1_DRIVER_TYPE A4988
|
||||||
#define E2_DRIVER_TYPE A4988
|
//#define E2_DRIVER_TYPE A4988
|
||||||
#define E3_DRIVER_TYPE A4988
|
//#define E3_DRIVER_TYPE A4988
|
||||||
#define E4_DRIVER_TYPE A4988
|
//#define E4_DRIVER_TYPE A4988
|
||||||
|
|
||||||
// Enable this feature if all enabled endstop pins are interrupt-capable.
|
// Enable this feature if all enabled endstop pins are interrupt-capable.
|
||||||
// This will remove the need to poll the interrupt pins, saving many CPU cycles.
|
// This will remove the need to poll the interrupt pins, saving many CPU cycles.
|
||||||
|
@ -552,9 +552,12 @@
|
|||||||
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe.
|
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe.
|
||||||
|
|
||||||
/**
|
/**
|
||||||
* Specify Stepper Driver types
|
* Stepper Drivers
|
||||||
* The options are used to determine driver pulse timings as well as more advanced functionality.
|
*
|
||||||
* Stepper timing options can be overridden in Configuration_adv.h
|
* These settings allow Marlin to tune stepper driver timing and enable advanced options for
|
||||||
|
* stepper drivers that support them. You may also override timing options in Configuration_adv.h.
|
||||||
|
*
|
||||||
|
* A4988 is assumed for unspecified drivers.
|
||||||
*
|
*
|
||||||
* Options: A4988, A5984, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
|
* Options: A4988, A5984, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
|
||||||
* TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
|
* TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
|
||||||
@ -562,17 +565,17 @@
|
|||||||
* TMC5130, TMC5130_STANDALONE
|
* TMC5130, TMC5130_STANDALONE
|
||||||
* :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
|
* :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
|
||||||
*/
|
*/
|
||||||
#define X_DRIVER_TYPE A4988
|
//#define X_DRIVER_TYPE A4988
|
||||||
#define Y_DRIVER_TYPE A4988
|
//#define Y_DRIVER_TYPE A4988
|
||||||
#define Z_DRIVER_TYPE A4988
|
//#define Z_DRIVER_TYPE A4988
|
||||||
#define X2_DRIVER_TYPE A4988
|
//#define X2_DRIVER_TYPE A4988
|
||||||
#define Y2_DRIVER_TYPE A4988
|
//#define Y2_DRIVER_TYPE A4988
|
||||||
#define Z2_DRIVER_TYPE A4988
|
//#define Z2_DRIVER_TYPE A4988
|
||||||
#define E0_DRIVER_TYPE A4988
|
//#define E0_DRIVER_TYPE A4988
|
||||||
#define E1_DRIVER_TYPE A4988
|
//#define E1_DRIVER_TYPE A4988
|
||||||
#define E2_DRIVER_TYPE A4988
|
//#define E2_DRIVER_TYPE A4988
|
||||||
#define E3_DRIVER_TYPE A4988
|
//#define E3_DRIVER_TYPE A4988
|
||||||
#define E4_DRIVER_TYPE A4988
|
//#define E4_DRIVER_TYPE A4988
|
||||||
|
|
||||||
// Enable this feature if all enabled endstop pins are interrupt-capable.
|
// Enable this feature if all enabled endstop pins are interrupt-capable.
|
||||||
// This will remove the need to poll the interrupt pins, saving many CPU cycles.
|
// This will remove the need to poll the interrupt pins, saving many CPU cycles.
|
||||||
|
@ -567,9 +567,12 @@
|
|||||||
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe.
|
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe.
|
||||||
|
|
||||||
/**
|
/**
|
||||||
* Specify Stepper Driver types
|
* Stepper Drivers
|
||||||
* The options are used to determine driver pulse timings as well as more advanced functionality.
|
*
|
||||||
* Stepper timing options can be overridden in Configuration_adv.h
|
* These settings allow Marlin to tune stepper driver timing and enable advanced options for
|
||||||
|
* stepper drivers that support them. You may also override timing options in Configuration_adv.h.
|
||||||
|
*
|
||||||
|
* A4988 is assumed for unspecified drivers.
|
||||||
*
|
*
|
||||||
* Options: A4988, A5984, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
|
* Options: A4988, A5984, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
|
||||||
* TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
|
* TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
|
||||||
@ -577,17 +580,17 @@
|
|||||||
* TMC5130, TMC5130_STANDALONE
|
* TMC5130, TMC5130_STANDALONE
|
||||||
* :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
|
* :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
|
||||||
*/
|
*/
|
||||||
#define X_DRIVER_TYPE A4988
|
//#define X_DRIVER_TYPE A4988
|
||||||
#define Y_DRIVER_TYPE A4988
|
//#define Y_DRIVER_TYPE A4988
|
||||||
#define Z_DRIVER_TYPE A4988
|
//#define Z_DRIVER_TYPE A4988
|
||||||
#define X2_DRIVER_TYPE A4988
|
//#define X2_DRIVER_TYPE A4988
|
||||||
#define Y2_DRIVER_TYPE A4988
|
//#define Y2_DRIVER_TYPE A4988
|
||||||
#define Z2_DRIVER_TYPE A4988
|
//#define Z2_DRIVER_TYPE A4988
|
||||||
#define E0_DRIVER_TYPE A4988
|
//#define E0_DRIVER_TYPE A4988
|
||||||
#define E1_DRIVER_TYPE A4988
|
//#define E1_DRIVER_TYPE A4988
|
||||||
#define E2_DRIVER_TYPE A4988
|
//#define E2_DRIVER_TYPE A4988
|
||||||
#define E3_DRIVER_TYPE A4988
|
//#define E3_DRIVER_TYPE A4988
|
||||||
#define E4_DRIVER_TYPE A4988
|
//#define E4_DRIVER_TYPE A4988
|
||||||
|
|
||||||
// Enable this feature if all enabled endstop pins are interrupt-capable.
|
// Enable this feature if all enabled endstop pins are interrupt-capable.
|
||||||
// This will remove the need to poll the interrupt pins, saving many CPU cycles.
|
// This will remove the need to poll the interrupt pins, saving many CPU cycles.
|
||||||
|
@ -567,9 +567,12 @@
|
|||||||
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe.
|
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe.
|
||||||
|
|
||||||
/**
|
/**
|
||||||
* Specify Stepper Driver types
|
* Stepper Drivers
|
||||||
* The options are used to determine driver pulse timings as well as more advanced functionality.
|
*
|
||||||
* Stepper timing options can be overridden in Configuration_adv.h
|
* These settings allow Marlin to tune stepper driver timing and enable advanced options for
|
||||||
|
* stepper drivers that support them. You may also override timing options in Configuration_adv.h.
|
||||||
|
*
|
||||||
|
* A4988 is assumed for unspecified drivers.
|
||||||
*
|
*
|
||||||
* Options: A4988, A5984, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
|
* Options: A4988, A5984, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
|
||||||
* TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
|
* TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
|
||||||
@ -577,17 +580,17 @@
|
|||||||
* TMC5130, TMC5130_STANDALONE
|
* TMC5130, TMC5130_STANDALONE
|
||||||
* :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
|
* :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
|
||||||
*/
|
*/
|
||||||
#define X_DRIVER_TYPE A4988
|
//#define X_DRIVER_TYPE A4988
|
||||||
#define Y_DRIVER_TYPE A4988
|
//#define Y_DRIVER_TYPE A4988
|
||||||
#define Z_DRIVER_TYPE A4988
|
//#define Z_DRIVER_TYPE A4988
|
||||||
#define X2_DRIVER_TYPE A4988
|
//#define X2_DRIVER_TYPE A4988
|
||||||
#define Y2_DRIVER_TYPE A4988
|
//#define Y2_DRIVER_TYPE A4988
|
||||||
#define Z2_DRIVER_TYPE A4988
|
//#define Z2_DRIVER_TYPE A4988
|
||||||
#define E0_DRIVER_TYPE A4988
|
//#define E0_DRIVER_TYPE A4988
|
||||||
#define E1_DRIVER_TYPE A4988
|
//#define E1_DRIVER_TYPE A4988
|
||||||
#define E2_DRIVER_TYPE A4988
|
//#define E2_DRIVER_TYPE A4988
|
||||||
#define E3_DRIVER_TYPE A4988
|
//#define E3_DRIVER_TYPE A4988
|
||||||
#define E4_DRIVER_TYPE A4988
|
//#define E4_DRIVER_TYPE A4988
|
||||||
|
|
||||||
// Enable this feature if all enabled endstop pins are interrupt-capable.
|
// Enable this feature if all enabled endstop pins are interrupt-capable.
|
||||||
// This will remove the need to poll the interrupt pins, saving many CPU cycles.
|
// This will remove the need to poll the interrupt pins, saving many CPU cycles.
|
||||||
|
@ -552,9 +552,12 @@
|
|||||||
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe.
|
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe.
|
||||||
|
|
||||||
/**
|
/**
|
||||||
* Specify Stepper Driver types
|
* Stepper Drivers
|
||||||
* The options are used to determine driver pulse timings as well as more advanced functionality.
|
*
|
||||||
* Stepper timing options can be overridden in Configuration_adv.h
|
* These settings allow Marlin to tune stepper driver timing and enable advanced options for
|
||||||
|
* stepper drivers that support them. You may also override timing options in Configuration_adv.h.
|
||||||
|
*
|
||||||
|
* A4988 is assumed for unspecified drivers.
|
||||||
*
|
*
|
||||||
* Options: A4988, A5984, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
|
* Options: A4988, A5984, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
|
||||||
* TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
|
* TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
|
||||||
@ -562,17 +565,17 @@
|
|||||||
* TMC5130, TMC5130_STANDALONE
|
* TMC5130, TMC5130_STANDALONE
|
||||||
* :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
|
* :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
|
||||||
*/
|
*/
|
||||||
#define X_DRIVER_TYPE A4988
|
//#define X_DRIVER_TYPE A4988
|
||||||
#define Y_DRIVER_TYPE A4988
|
//#define Y_DRIVER_TYPE A4988
|
||||||
#define Z_DRIVER_TYPE A4988
|
//#define Z_DRIVER_TYPE A4988
|
||||||
#define X2_DRIVER_TYPE A4988
|
//#define X2_DRIVER_TYPE A4988
|
||||||
#define Y2_DRIVER_TYPE A4988
|
//#define Y2_DRIVER_TYPE A4988
|
||||||
#define Z2_DRIVER_TYPE A4988
|
//#define Z2_DRIVER_TYPE A4988
|
||||||
#define E0_DRIVER_TYPE A4988
|
//#define E0_DRIVER_TYPE A4988
|
||||||
#define E1_DRIVER_TYPE A4988
|
//#define E1_DRIVER_TYPE A4988
|
||||||
#define E2_DRIVER_TYPE A4988
|
//#define E2_DRIVER_TYPE A4988
|
||||||
#define E3_DRIVER_TYPE A4988
|
//#define E3_DRIVER_TYPE A4988
|
||||||
#define E4_DRIVER_TYPE A4988
|
//#define E4_DRIVER_TYPE A4988
|
||||||
|
|
||||||
// Enable this feature if all enabled endstop pins are interrupt-capable.
|
// Enable this feature if all enabled endstop pins are interrupt-capable.
|
||||||
// This will remove the need to poll the interrupt pins, saving many CPU cycles.
|
// This will remove the need to poll the interrupt pins, saving many CPU cycles.
|
||||||
|
@ -552,9 +552,12 @@
|
|||||||
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe.
|
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe.
|
||||||
|
|
||||||
/**
|
/**
|
||||||
* Specify Stepper Driver types
|
* Stepper Drivers
|
||||||
* The options are used to determine driver pulse timings as well as more advanced functionality.
|
*
|
||||||
* Stepper timing options can be overridden in Configuration_adv.h
|
* These settings allow Marlin to tune stepper driver timing and enable advanced options for
|
||||||
|
* stepper drivers that support them. You may also override timing options in Configuration_adv.h.
|
||||||
|
*
|
||||||
|
* A4988 is assumed for unspecified drivers.
|
||||||
*
|
*
|
||||||
* Options: A4988, A5984, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
|
* Options: A4988, A5984, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
|
||||||
* TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
|
* TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
|
||||||
@ -562,17 +565,17 @@
|
|||||||
* TMC5130, TMC5130_STANDALONE
|
* TMC5130, TMC5130_STANDALONE
|
||||||
* :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
|
* :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
|
||||||
*/
|
*/
|
||||||
#define X_DRIVER_TYPE A4988
|
//#define X_DRIVER_TYPE A4988
|
||||||
#define Y_DRIVER_TYPE A4988
|
//#define Y_DRIVER_TYPE A4988
|
||||||
#define Z_DRIVER_TYPE A4988
|
//#define Z_DRIVER_TYPE A4988
|
||||||
#define X2_DRIVER_TYPE A4988
|
//#define X2_DRIVER_TYPE A4988
|
||||||
#define Y2_DRIVER_TYPE A4988
|
//#define Y2_DRIVER_TYPE A4988
|
||||||
#define Z2_DRIVER_TYPE A4988
|
//#define Z2_DRIVER_TYPE A4988
|
||||||
#define E0_DRIVER_TYPE A4988
|
//#define E0_DRIVER_TYPE A4988
|
||||||
#define E1_DRIVER_TYPE A4988
|
//#define E1_DRIVER_TYPE A4988
|
||||||
#define E2_DRIVER_TYPE A4988
|
//#define E2_DRIVER_TYPE A4988
|
||||||
#define E3_DRIVER_TYPE A4988
|
//#define E3_DRIVER_TYPE A4988
|
||||||
#define E4_DRIVER_TYPE A4988
|
//#define E4_DRIVER_TYPE A4988
|
||||||
|
|
||||||
// Enable this feature if all enabled endstop pins are interrupt-capable.
|
// Enable this feature if all enabled endstop pins are interrupt-capable.
|
||||||
// This will remove the need to poll the interrupt pins, saving many CPU cycles.
|
// This will remove the need to poll the interrupt pins, saving many CPU cycles.
|
||||||
|
@ -564,9 +564,12 @@
|
|||||||
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe.
|
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe.
|
||||||
|
|
||||||
/**
|
/**
|
||||||
* Specify Stepper Driver types
|
* Stepper Drivers
|
||||||
* The options are used to determine driver pulse timings as well as more advanced functionality.
|
*
|
||||||
* Stepper timing options can be overridden in Configuration_adv.h
|
* These settings allow Marlin to tune stepper driver timing and enable advanced options for
|
||||||
|
* stepper drivers that support them. You may also override timing options in Configuration_adv.h.
|
||||||
|
*
|
||||||
|
* A4988 is assumed for unspecified drivers.
|
||||||
*
|
*
|
||||||
* Options: A4988, A5984, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
|
* Options: A4988, A5984, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
|
||||||
* TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
|
* TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
|
||||||
@ -574,17 +577,17 @@
|
|||||||
* TMC5130, TMC5130_STANDALONE
|
* TMC5130, TMC5130_STANDALONE
|
||||||
* :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
|
* :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
|
||||||
*/
|
*/
|
||||||
#define X_DRIVER_TYPE A4988
|
//#define X_DRIVER_TYPE A4988
|
||||||
#define Y_DRIVER_TYPE A4988
|
//#define Y_DRIVER_TYPE A4988
|
||||||
#define Z_DRIVER_TYPE A4988
|
//#define Z_DRIVER_TYPE A4988
|
||||||
#define X2_DRIVER_TYPE A4988
|
//#define X2_DRIVER_TYPE A4988
|
||||||
#define Y2_DRIVER_TYPE A4988
|
//#define Y2_DRIVER_TYPE A4988
|
||||||
#define Z2_DRIVER_TYPE A4988
|
//#define Z2_DRIVER_TYPE A4988
|
||||||
#define E0_DRIVER_TYPE A4988
|
//#define E0_DRIVER_TYPE A4988
|
||||||
#define E1_DRIVER_TYPE A4988
|
//#define E1_DRIVER_TYPE A4988
|
||||||
#define E2_DRIVER_TYPE A4988
|
//#define E2_DRIVER_TYPE A4988
|
||||||
#define E3_DRIVER_TYPE A4988
|
//#define E3_DRIVER_TYPE A4988
|
||||||
#define E4_DRIVER_TYPE A4988
|
//#define E4_DRIVER_TYPE A4988
|
||||||
|
|
||||||
// Enable this feature if all enabled endstop pins are interrupt-capable.
|
// Enable this feature if all enabled endstop pins are interrupt-capable.
|
||||||
// This will remove the need to poll the interrupt pins, saving many CPU cycles.
|
// This will remove the need to poll the interrupt pins, saving many CPU cycles.
|
||||||
|
@ -551,9 +551,12 @@
|
|||||||
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe.
|
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe.
|
||||||
|
|
||||||
/**
|
/**
|
||||||
* Specify Stepper Driver types
|
* Stepper Drivers
|
||||||
* The options are used to determine driver pulse timings as well as more advanced functionality.
|
*
|
||||||
* Stepper timing options can be overridden in Configuration_adv.h
|
* These settings allow Marlin to tune stepper driver timing and enable advanced options for
|
||||||
|
* stepper drivers that support them. You may also override timing options in Configuration_adv.h.
|
||||||
|
*
|
||||||
|
* A4988 is assumed for unspecified drivers.
|
||||||
*
|
*
|
||||||
* Options: A4988, A5984, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
|
* Options: A4988, A5984, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
|
||||||
* TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
|
* TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
|
||||||
@ -561,17 +564,17 @@
|
|||||||
* TMC5130, TMC5130_STANDALONE
|
* TMC5130, TMC5130_STANDALONE
|
||||||
* :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
|
* :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
|
||||||
*/
|
*/
|
||||||
#define X_DRIVER_TYPE A4988
|
//#define X_DRIVER_TYPE A4988
|
||||||
#define Y_DRIVER_TYPE A4988
|
//#define Y_DRIVER_TYPE A4988
|
||||||
#define Z_DRIVER_TYPE A4988
|
//#define Z_DRIVER_TYPE A4988
|
||||||
#define X2_DRIVER_TYPE A4988
|
//#define X2_DRIVER_TYPE A4988
|
||||||
#define Y2_DRIVER_TYPE A4988
|
//#define Y2_DRIVER_TYPE A4988
|
||||||
#define Z2_DRIVER_TYPE A4988
|
//#define Z2_DRIVER_TYPE A4988
|
||||||
#define E0_DRIVER_TYPE A4988
|
//#define E0_DRIVER_TYPE A4988
|
||||||
#define E1_DRIVER_TYPE A4988
|
//#define E1_DRIVER_TYPE A4988
|
||||||
#define E2_DRIVER_TYPE A4988
|
//#define E2_DRIVER_TYPE A4988
|
||||||
#define E3_DRIVER_TYPE A4988
|
//#define E3_DRIVER_TYPE A4988
|
||||||
#define E4_DRIVER_TYPE A4988
|
//#define E4_DRIVER_TYPE A4988
|
||||||
|
|
||||||
// Enable this feature if all enabled endstop pins are interrupt-capable.
|
// Enable this feature if all enabled endstop pins are interrupt-capable.
|
||||||
// This will remove the need to poll the interrupt pins, saving many CPU cycles.
|
// This will remove the need to poll the interrupt pins, saving many CPU cycles.
|
||||||
|
@ -552,9 +552,12 @@
|
|||||||
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe.
|
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe.
|
||||||
|
|
||||||
/**
|
/**
|
||||||
* Specify Stepper Driver types
|
* Stepper Drivers
|
||||||
* The options are used to determine driver pulse timings as well as more advanced functionality.
|
*
|
||||||
* Stepper timing options can be overridden in Configuration_adv.h
|
* These settings allow Marlin to tune stepper driver timing and enable advanced options for
|
||||||
|
* stepper drivers that support them. You may also override timing options in Configuration_adv.h.
|
||||||
|
*
|
||||||
|
* A4988 is assumed for unspecified drivers.
|
||||||
*
|
*
|
||||||
* Options: A4988, A5984, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
|
* Options: A4988, A5984, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
|
||||||
* TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
|
* TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
|
||||||
@ -562,17 +565,17 @@
|
|||||||
* TMC5130, TMC5130_STANDALONE
|
* TMC5130, TMC5130_STANDALONE
|
||||||
* :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
|
* :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
|
||||||
*/
|
*/
|
||||||
#define X_DRIVER_TYPE A4988
|
//#define X_DRIVER_TYPE A4988
|
||||||
#define Y_DRIVER_TYPE A4988
|
//#define Y_DRIVER_TYPE A4988
|
||||||
#define Z_DRIVER_TYPE A4988
|
//#define Z_DRIVER_TYPE A4988
|
||||||
#define X2_DRIVER_TYPE A4988
|
//#define X2_DRIVER_TYPE A4988
|
||||||
#define Y2_DRIVER_TYPE A4988
|
//#define Y2_DRIVER_TYPE A4988
|
||||||
#define Z2_DRIVER_TYPE A4988
|
//#define Z2_DRIVER_TYPE A4988
|
||||||
#define E0_DRIVER_TYPE A4988
|
//#define E0_DRIVER_TYPE A4988
|
||||||
#define E1_DRIVER_TYPE A4988
|
//#define E1_DRIVER_TYPE A4988
|
||||||
#define E2_DRIVER_TYPE A4988
|
//#define E2_DRIVER_TYPE A4988
|
||||||
#define E3_DRIVER_TYPE A4988
|
//#define E3_DRIVER_TYPE A4988
|
||||||
#define E4_DRIVER_TYPE A4988
|
//#define E4_DRIVER_TYPE A4988
|
||||||
|
|
||||||
// Enable this feature if all enabled endstop pins are interrupt-capable.
|
// Enable this feature if all enabled endstop pins are interrupt-capable.
|
||||||
// This will remove the need to poll the interrupt pins, saving many CPU cycles.
|
// This will remove the need to poll the interrupt pins, saving many CPU cycles.
|
||||||
|
@ -552,9 +552,12 @@
|
|||||||
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe.
|
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe.
|
||||||
|
|
||||||
/**
|
/**
|
||||||
* Specify Stepper Driver types
|
* Stepper Drivers
|
||||||
* The options are used to determine driver pulse timings as well as more advanced functionality.
|
*
|
||||||
* Stepper timing options can be overridden in Configuration_adv.h
|
* These settings allow Marlin to tune stepper driver timing and enable advanced options for
|
||||||
|
* stepper drivers that support them. You may also override timing options in Configuration_adv.h.
|
||||||
|
*
|
||||||
|
* A4988 is assumed for unspecified drivers.
|
||||||
*
|
*
|
||||||
* Options: A4988, A5984, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
|
* Options: A4988, A5984, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
|
||||||
* TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
|
* TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
|
||||||
@ -562,17 +565,17 @@
|
|||||||
* TMC5130, TMC5130_STANDALONE
|
* TMC5130, TMC5130_STANDALONE
|
||||||
* :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
|
* :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
|
||||||
*/
|
*/
|
||||||
#define X_DRIVER_TYPE A4988
|
//#define X_DRIVER_TYPE A4988
|
||||||
#define Y_DRIVER_TYPE A4988
|
//#define Y_DRIVER_TYPE A4988
|
||||||
#define Z_DRIVER_TYPE A4988
|
//#define Z_DRIVER_TYPE A4988
|
||||||
#define X2_DRIVER_TYPE A4988
|
//#define X2_DRIVER_TYPE A4988
|
||||||
#define Y2_DRIVER_TYPE A4988
|
//#define Y2_DRIVER_TYPE A4988
|
||||||
#define Z2_DRIVER_TYPE A4988
|
//#define Z2_DRIVER_TYPE A4988
|
||||||
#define E0_DRIVER_TYPE A4988
|
//#define E0_DRIVER_TYPE A4988
|
||||||
#define E1_DRIVER_TYPE A4988
|
//#define E1_DRIVER_TYPE A4988
|
||||||
#define E2_DRIVER_TYPE A4988
|
//#define E2_DRIVER_TYPE A4988
|
||||||
#define E3_DRIVER_TYPE A4988
|
//#define E3_DRIVER_TYPE A4988
|
||||||
#define E4_DRIVER_TYPE A4988
|
//#define E4_DRIVER_TYPE A4988
|
||||||
|
|
||||||
// Enable this feature if all enabled endstop pins are interrupt-capable.
|
// Enable this feature if all enabled endstop pins are interrupt-capable.
|
||||||
// This will remove the need to poll the interrupt pins, saving many CPU cycles.
|
// This will remove the need to poll the interrupt pins, saving many CPU cycles.
|
||||||
|
@ -554,9 +554,12 @@
|
|||||||
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe.
|
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe.
|
||||||
|
|
||||||
/**
|
/**
|
||||||
* Specify Stepper Driver types
|
* Stepper Drivers
|
||||||
* The options are used to determine driver pulse timings as well as more advanced functionality.
|
*
|
||||||
* Stepper timing options can be overridden in Configuration_adv.h
|
* These settings allow Marlin to tune stepper driver timing and enable advanced options for
|
||||||
|
* stepper drivers that support them. You may also override timing options in Configuration_adv.h.
|
||||||
|
*
|
||||||
|
* A4988 is assumed for unspecified drivers.
|
||||||
*
|
*
|
||||||
* Options: A4988, A5984, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
|
* Options: A4988, A5984, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
|
||||||
* TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
|
* TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
|
||||||
@ -564,17 +567,17 @@
|
|||||||
* TMC5130, TMC5130_STANDALONE
|
* TMC5130, TMC5130_STANDALONE
|
||||||
* :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
|
* :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
|
||||||
*/
|
*/
|
||||||
#define X_DRIVER_TYPE A4988
|
//#define X_DRIVER_TYPE A4988
|
||||||
#define Y_DRIVER_TYPE A4988
|
//#define Y_DRIVER_TYPE A4988
|
||||||
#define Z_DRIVER_TYPE A4988
|
//#define Z_DRIVER_TYPE A4988
|
||||||
#define X2_DRIVER_TYPE A4988
|
//#define X2_DRIVER_TYPE A4988
|
||||||
#define Y2_DRIVER_TYPE A4988
|
//#define Y2_DRIVER_TYPE A4988
|
||||||
#define Z2_DRIVER_TYPE A4988
|
//#define Z2_DRIVER_TYPE A4988
|
||||||
#define E0_DRIVER_TYPE A4988
|
//#define E0_DRIVER_TYPE A4988
|
||||||
#define E1_DRIVER_TYPE A4988
|
//#define E1_DRIVER_TYPE A4988
|
||||||
#define E2_DRIVER_TYPE A4988
|
//#define E2_DRIVER_TYPE A4988
|
||||||
#define E3_DRIVER_TYPE A4988
|
//#define E3_DRIVER_TYPE A4988
|
||||||
#define E4_DRIVER_TYPE A4988
|
//#define E4_DRIVER_TYPE A4988
|
||||||
|
|
||||||
// Enable this feature if all enabled endstop pins are interrupt-capable.
|
// Enable this feature if all enabled endstop pins are interrupt-capable.
|
||||||
// This will remove the need to poll the interrupt pins, saving many CPU cycles.
|
// This will remove the need to poll the interrupt pins, saving many CPU cycles.
|
||||||
|
@ -552,9 +552,12 @@
|
|||||||
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe.
|
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe.
|
||||||
|
|
||||||
/**
|
/**
|
||||||
* Specify Stepper Driver types
|
* Stepper Drivers
|
||||||
* The options are used to determine driver pulse timings as well as more advanced functionality.
|
*
|
||||||
* Stepper timing options can be overridden in Configuration_adv.h
|
* These settings allow Marlin to tune stepper driver timing and enable advanced options for
|
||||||
|
* stepper drivers that support them. You may also override timing options in Configuration_adv.h.
|
||||||
|
*
|
||||||
|
* A4988 is assumed for unspecified drivers.
|
||||||
*
|
*
|
||||||
* Options: A4988, A5984, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
|
* Options: A4988, A5984, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
|
||||||
* TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
|
* TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
|
||||||
@ -562,17 +565,17 @@
|
|||||||
* TMC5130, TMC5130_STANDALONE
|
* TMC5130, TMC5130_STANDALONE
|
||||||
* :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
|
* :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
|
||||||
*/
|
*/
|
||||||
#define X_DRIVER_TYPE A4988
|
//#define X_DRIVER_TYPE A4988
|
||||||
#define Y_DRIVER_TYPE A4988
|
//#define Y_DRIVER_TYPE A4988
|
||||||
#define Z_DRIVER_TYPE A4988
|
//#define Z_DRIVER_TYPE A4988
|
||||||
#define X2_DRIVER_TYPE A4988
|
//#define X2_DRIVER_TYPE A4988
|
||||||
#define Y2_DRIVER_TYPE A4988
|
//#define Y2_DRIVER_TYPE A4988
|
||||||
#define Z2_DRIVER_TYPE A4988
|
//#define Z2_DRIVER_TYPE A4988
|
||||||
#define E0_DRIVER_TYPE A4988
|
//#define E0_DRIVER_TYPE A4988
|
||||||
#define E1_DRIVER_TYPE A4988
|
//#define E1_DRIVER_TYPE A4988
|
||||||
#define E2_DRIVER_TYPE A4988
|
//#define E2_DRIVER_TYPE A4988
|
||||||
#define E3_DRIVER_TYPE A4988
|
//#define E3_DRIVER_TYPE A4988
|
||||||
#define E4_DRIVER_TYPE A4988
|
//#define E4_DRIVER_TYPE A4988
|
||||||
|
|
||||||
// Enable this feature if all enabled endstop pins are interrupt-capable.
|
// Enable this feature if all enabled endstop pins are interrupt-capable.
|
||||||
// This will remove the need to poll the interrupt pins, saving many CPU cycles.
|
// This will remove the need to poll the interrupt pins, saving many CPU cycles.
|
||||||
|
@ -552,9 +552,12 @@
|
|||||||
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe.
|
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe.
|
||||||
|
|
||||||
/**
|
/**
|
||||||
* Specify Stepper Driver types
|
* Stepper Drivers
|
||||||
* The options are used to determine driver pulse timings as well as more advanced functionality.
|
*
|
||||||
* Stepper timing options can be overridden in Configuration_adv.h
|
* These settings allow Marlin to tune stepper driver timing and enable advanced options for
|
||||||
|
* stepper drivers that support them. You may also override timing options in Configuration_adv.h.
|
||||||
|
*
|
||||||
|
* A4988 is assumed for unspecified drivers.
|
||||||
*
|
*
|
||||||
* Options: A4988, A5984, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
|
* Options: A4988, A5984, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
|
||||||
* TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
|
* TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
|
||||||
@ -562,17 +565,17 @@
|
|||||||
* TMC5130, TMC5130_STANDALONE
|
* TMC5130, TMC5130_STANDALONE
|
||||||
* :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
|
* :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
|
||||||
*/
|
*/
|
||||||
#define X_DRIVER_TYPE A4988
|
//#define X_DRIVER_TYPE A4988
|
||||||
#define Y_DRIVER_TYPE A4988
|
//#define Y_DRIVER_TYPE A4988
|
||||||
#define Z_DRIVER_TYPE A4988
|
//#define Z_DRIVER_TYPE A4988
|
||||||
#define X2_DRIVER_TYPE A4988
|
//#define X2_DRIVER_TYPE A4988
|
||||||
#define Y2_DRIVER_TYPE A4988
|
//#define Y2_DRIVER_TYPE A4988
|
||||||
#define Z2_DRIVER_TYPE A4988
|
//#define Z2_DRIVER_TYPE A4988
|
||||||
#define E0_DRIVER_TYPE A4988
|
//#define E0_DRIVER_TYPE A4988
|
||||||
#define E1_DRIVER_TYPE A4988
|
//#define E1_DRIVER_TYPE A4988
|
||||||
#define E2_DRIVER_TYPE A4988
|
//#define E2_DRIVER_TYPE A4988
|
||||||
#define E3_DRIVER_TYPE A4988
|
//#define E3_DRIVER_TYPE A4988
|
||||||
#define E4_DRIVER_TYPE A4988
|
//#define E4_DRIVER_TYPE A4988
|
||||||
|
|
||||||
// Enable this feature if all enabled endstop pins are interrupt-capable.
|
// Enable this feature if all enabled endstop pins are interrupt-capable.
|
||||||
// This will remove the need to poll the interrupt pins, saving many CPU cycles.
|
// This will remove the need to poll the interrupt pins, saving many CPU cycles.
|
||||||
|
@ -603,9 +603,12 @@
|
|||||||
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe.
|
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe.
|
||||||
|
|
||||||
/**
|
/**
|
||||||
* Specify Stepper Driver types
|
* Stepper Drivers
|
||||||
* The options are used to determine driver pulse timings as well as more advanced functionality.
|
*
|
||||||
* Stepper timing options can be overridden in Configuration_adv.h
|
* These settings allow Marlin to tune stepper driver timing and enable advanced options for
|
||||||
|
* stepper drivers that support them. You may also override timing options in Configuration_adv.h.
|
||||||
|
*
|
||||||
|
* A4988 is assumed for unspecified drivers.
|
||||||
*
|
*
|
||||||
* Options: A4988, A5984, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
|
* Options: A4988, A5984, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
|
||||||
* TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
|
* TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
|
||||||
@ -613,17 +616,17 @@
|
|||||||
* TMC5130, TMC5130_STANDALONE
|
* TMC5130, TMC5130_STANDALONE
|
||||||
* :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
|
* :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
|
||||||
*/
|
*/
|
||||||
#define X_DRIVER_TYPE A4988
|
//#define X_DRIVER_TYPE A4988
|
||||||
#define Y_DRIVER_TYPE A4988
|
//#define Y_DRIVER_TYPE A4988
|
||||||
#define Z_DRIVER_TYPE A4988
|
//#define Z_DRIVER_TYPE A4988
|
||||||
#define X2_DRIVER_TYPE A4988
|
//#define X2_DRIVER_TYPE A4988
|
||||||
#define Y2_DRIVER_TYPE A4988
|
//#define Y2_DRIVER_TYPE A4988
|
||||||
#define Z2_DRIVER_TYPE A4988
|
//#define Z2_DRIVER_TYPE A4988
|
||||||
#define E0_DRIVER_TYPE A4988
|
//#define E0_DRIVER_TYPE A4988
|
||||||
#define E1_DRIVER_TYPE A4988
|
//#define E1_DRIVER_TYPE A4988
|
||||||
#define E2_DRIVER_TYPE A4988
|
//#define E2_DRIVER_TYPE A4988
|
||||||
#define E3_DRIVER_TYPE A4988
|
//#define E3_DRIVER_TYPE A4988
|
||||||
#define E4_DRIVER_TYPE A4988
|
//#define E4_DRIVER_TYPE A4988
|
||||||
|
|
||||||
// Enable this feature if all enabled endstop pins are interrupt-capable.
|
// Enable this feature if all enabled endstop pins are interrupt-capable.
|
||||||
// This will remove the need to poll the interrupt pins, saving many CPU cycles.
|
// This will remove the need to poll the interrupt pins, saving many CPU cycles.
|
||||||
|
@ -552,9 +552,12 @@
|
|||||||
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe.
|
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe.
|
||||||
|
|
||||||
/**
|
/**
|
||||||
* Specify Stepper Driver types
|
* Stepper Drivers
|
||||||
* The options are used to determine driver pulse timings as well as more advanced functionality.
|
*
|
||||||
* Stepper timing options can be overridden in Configuration_adv.h
|
* These settings allow Marlin to tune stepper driver timing and enable advanced options for
|
||||||
|
* stepper drivers that support them. You may also override timing options in Configuration_adv.h.
|
||||||
|
*
|
||||||
|
* A4988 is assumed for unspecified drivers.
|
||||||
*
|
*
|
||||||
* Options: A4988, A5984, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
|
* Options: A4988, A5984, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
|
||||||
* TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
|
* TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
|
||||||
@ -562,17 +565,17 @@
|
|||||||
* TMC5130, TMC5130_STANDALONE
|
* TMC5130, TMC5130_STANDALONE
|
||||||
* :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
|
* :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
|
||||||
*/
|
*/
|
||||||
#define X_DRIVER_TYPE A4988
|
//#define X_DRIVER_TYPE A4988
|
||||||
#define Y_DRIVER_TYPE A4988
|
//#define Y_DRIVER_TYPE A4988
|
||||||
#define Z_DRIVER_TYPE A4988
|
//#define Z_DRIVER_TYPE A4988
|
||||||
#define X2_DRIVER_TYPE A4988
|
//#define X2_DRIVER_TYPE A4988
|
||||||
#define Y2_DRIVER_TYPE A4988
|
//#define Y2_DRIVER_TYPE A4988
|
||||||
#define Z2_DRIVER_TYPE A4988
|
//#define Z2_DRIVER_TYPE A4988
|
||||||
#define E0_DRIVER_TYPE A4988
|
//#define E0_DRIVER_TYPE A4988
|
||||||
#define E1_DRIVER_TYPE A4988
|
//#define E1_DRIVER_TYPE A4988
|
||||||
#define E2_DRIVER_TYPE A4988
|
//#define E2_DRIVER_TYPE A4988
|
||||||
#define E3_DRIVER_TYPE A4988
|
//#define E3_DRIVER_TYPE A4988
|
||||||
#define E4_DRIVER_TYPE A4988
|
//#define E4_DRIVER_TYPE A4988
|
||||||
|
|
||||||
// Enable this feature if all enabled endstop pins are interrupt-capable.
|
// Enable this feature if all enabled endstop pins are interrupt-capable.
|
||||||
// This will remove the need to poll the interrupt pins, saving many CPU cycles.
|
// This will remove the need to poll the interrupt pins, saving many CPU cycles.
|
||||||
|
@ -563,9 +563,12 @@
|
|||||||
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe.
|
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe.
|
||||||
|
|
||||||
/**
|
/**
|
||||||
* Specify Stepper Driver types
|
* Stepper Drivers
|
||||||
* The options are used to determine driver pulse timings as well as more advanced functionality.
|
*
|
||||||
* Stepper timing options can be overridden in Configuration_adv.h
|
* These settings allow Marlin to tune stepper driver timing and enable advanced options for
|
||||||
|
* stepper drivers that support them. You may also override timing options in Configuration_adv.h.
|
||||||
|
*
|
||||||
|
* A4988 is assumed for unspecified drivers.
|
||||||
*
|
*
|
||||||
* Options: A4988, A5984, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
|
* Options: A4988, A5984, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
|
||||||
* TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
|
* TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
|
||||||
@ -573,17 +576,17 @@
|
|||||||
* TMC5130, TMC5130_STANDALONE
|
* TMC5130, TMC5130_STANDALONE
|
||||||
* :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
|
* :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
|
||||||
*/
|
*/
|
||||||
#define X_DRIVER_TYPE A4988
|
//#define X_DRIVER_TYPE A4988
|
||||||
#define Y_DRIVER_TYPE A4988
|
//#define Y_DRIVER_TYPE A4988
|
||||||
#define Z_DRIVER_TYPE A4988
|
//#define Z_DRIVER_TYPE A4988
|
||||||
#define X2_DRIVER_TYPE A4988
|
//#define X2_DRIVER_TYPE A4988
|
||||||
#define Y2_DRIVER_TYPE A4988
|
//#define Y2_DRIVER_TYPE A4988
|
||||||
#define Z2_DRIVER_TYPE A4988
|
//#define Z2_DRIVER_TYPE A4988
|
||||||
#define E0_DRIVER_TYPE A4988
|
//#define E0_DRIVER_TYPE A4988
|
||||||
#define E1_DRIVER_TYPE A4988
|
//#define E1_DRIVER_TYPE A4988
|
||||||
#define E2_DRIVER_TYPE A4988
|
//#define E2_DRIVER_TYPE A4988
|
||||||
#define E3_DRIVER_TYPE A4988
|
//#define E3_DRIVER_TYPE A4988
|
||||||
#define E4_DRIVER_TYPE A4988
|
//#define E4_DRIVER_TYPE A4988
|
||||||
|
|
||||||
// Enable this feature if all enabled endstop pins are interrupt-capable.
|
// Enable this feature if all enabled endstop pins are interrupt-capable.
|
||||||
// This will remove the need to poll the interrupt pins, saving many CPU cycles.
|
// This will remove the need to poll the interrupt pins, saving many CPU cycles.
|
||||||
|
@ -552,9 +552,12 @@
|
|||||||
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe.
|
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe.
|
||||||
|
|
||||||
/**
|
/**
|
||||||
* Specify Stepper Driver types
|
* Stepper Drivers
|
||||||
* The options are used to determine driver pulse timings as well as more advanced functionality.
|
*
|
||||||
* Stepper timing options can be overridden in Configuration_adv.h
|
* These settings allow Marlin to tune stepper driver timing and enable advanced options for
|
||||||
|
* stepper drivers that support them. You may also override timing options in Configuration_adv.h.
|
||||||
|
*
|
||||||
|
* A4988 is assumed for unspecified drivers.
|
||||||
*
|
*
|
||||||
* Options: A4988, A5984, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
|
* Options: A4988, A5984, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
|
||||||
* TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
|
* TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
|
||||||
|
@ -582,9 +582,12 @@
|
|||||||
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe.
|
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe.
|
||||||
|
|
||||||
/**
|
/**
|
||||||
* Specify Stepper Driver types
|
* Stepper Drivers
|
||||||
* The options are used to determine driver pulse timings as well as more advanced functionality.
|
*
|
||||||
* Stepper timing options can be overridden in Configuration_adv.h
|
* These settings allow Marlin to tune stepper driver timing and enable advanced options for
|
||||||
|
* stepper drivers that support them. You may also override timing options in Configuration_adv.h.
|
||||||
|
*
|
||||||
|
* A4988 is assumed for unspecified drivers.
|
||||||
*
|
*
|
||||||
* Options: A4988, A5984, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
|
* Options: A4988, A5984, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
|
||||||
* TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
|
* TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
|
||||||
@ -592,17 +595,17 @@
|
|||||||
* TMC5130, TMC5130_STANDALONE
|
* TMC5130, TMC5130_STANDALONE
|
||||||
* :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
|
* :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
|
||||||
*/
|
*/
|
||||||
#define X_DRIVER_TYPE A4988
|
//#define X_DRIVER_TYPE A4988
|
||||||
#define Y_DRIVER_TYPE A4988
|
//#define Y_DRIVER_TYPE A4988
|
||||||
#define Z_DRIVER_TYPE A4988
|
//#define Z_DRIVER_TYPE A4988
|
||||||
#define X2_DRIVER_TYPE A4988
|
//#define X2_DRIVER_TYPE A4988
|
||||||
#define Y2_DRIVER_TYPE A4988
|
//#define Y2_DRIVER_TYPE A4988
|
||||||
#define Z2_DRIVER_TYPE A4988
|
//#define Z2_DRIVER_TYPE A4988
|
||||||
#define E0_DRIVER_TYPE A4988
|
//#define E0_DRIVER_TYPE A4988
|
||||||
#define E1_DRIVER_TYPE A4988
|
//#define E1_DRIVER_TYPE A4988
|
||||||
#define E2_DRIVER_TYPE A4988
|
//#define E2_DRIVER_TYPE A4988
|
||||||
#define E3_DRIVER_TYPE A4988
|
//#define E3_DRIVER_TYPE A4988
|
||||||
#define E4_DRIVER_TYPE A4988
|
//#define E4_DRIVER_TYPE A4988
|
||||||
|
|
||||||
// Enable this feature if all enabled endstop pins are interrupt-capable.
|
// Enable this feature if all enabled endstop pins are interrupt-capable.
|
||||||
// This will remove the need to poll the interrupt pins, saving many CPU cycles.
|
// This will remove the need to poll the interrupt pins, saving many CPU cycles.
|
||||||
|
@ -562,9 +562,12 @@
|
|||||||
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe.
|
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe.
|
||||||
|
|
||||||
/**
|
/**
|
||||||
* Specify Stepper Driver types
|
* Stepper Drivers
|
||||||
* The options are used to determine driver pulse timings as well as more advanced functionality.
|
*
|
||||||
* Stepper timing options can be overridden in Configuration_adv.h
|
* These settings allow Marlin to tune stepper driver timing and enable advanced options for
|
||||||
|
* stepper drivers that support them. You may also override timing options in Configuration_adv.h.
|
||||||
|
*
|
||||||
|
* A4988 is assumed for unspecified drivers.
|
||||||
*
|
*
|
||||||
* Options: A4988, A5984, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
|
* Options: A4988, A5984, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
|
||||||
* TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
|
* TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
|
||||||
@ -572,17 +575,17 @@
|
|||||||
* TMC5130, TMC5130_STANDALONE
|
* TMC5130, TMC5130_STANDALONE
|
||||||
* :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
|
* :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
|
||||||
*/
|
*/
|
||||||
#define X_DRIVER_TYPE A4988
|
//#define X_DRIVER_TYPE A4988
|
||||||
#define Y_DRIVER_TYPE A4988
|
//#define Y_DRIVER_TYPE A4988
|
||||||
#define Z_DRIVER_TYPE A4988
|
//#define Z_DRIVER_TYPE A4988
|
||||||
#define X2_DRIVER_TYPE A4988
|
//#define X2_DRIVER_TYPE A4988
|
||||||
#define Y2_DRIVER_TYPE A4988
|
//#define Y2_DRIVER_TYPE A4988
|
||||||
#define Z2_DRIVER_TYPE A4988
|
//#define Z2_DRIVER_TYPE A4988
|
||||||
#define E0_DRIVER_TYPE A4988
|
//#define E0_DRIVER_TYPE A4988
|
||||||
#define E1_DRIVER_TYPE A4988
|
//#define E1_DRIVER_TYPE A4988
|
||||||
#define E2_DRIVER_TYPE A4988
|
//#define E2_DRIVER_TYPE A4988
|
||||||
#define E3_DRIVER_TYPE A4988
|
//#define E3_DRIVER_TYPE A4988
|
||||||
#define E4_DRIVER_TYPE A4988
|
//#define E4_DRIVER_TYPE A4988
|
||||||
|
|
||||||
// Enable this feature if all enabled endstop pins are interrupt-capable.
|
// Enable this feature if all enabled endstop pins are interrupt-capable.
|
||||||
// This will remove the need to poll the interrupt pins, saving many CPU cycles.
|
// This will remove the need to poll the interrupt pins, saving many CPU cycles.
|
||||||
|
@ -552,9 +552,12 @@
|
|||||||
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe.
|
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe.
|
||||||
|
|
||||||
/**
|
/**
|
||||||
* Specify Stepper Driver types
|
* Stepper Drivers
|
||||||
* The options are used to determine driver pulse timings as well as more advanced functionality.
|
*
|
||||||
* Stepper timing options can be overridden in Configuration_adv.h
|
* These settings allow Marlin to tune stepper driver timing and enable advanced options for
|
||||||
|
* stepper drivers that support them. You may also override timing options in Configuration_adv.h.
|
||||||
|
*
|
||||||
|
* A4988 is assumed for unspecified drivers.
|
||||||
*
|
*
|
||||||
* Options: A4988, A5984, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
|
* Options: A4988, A5984, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
|
||||||
* TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
|
* TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
|
||||||
@ -562,17 +565,17 @@
|
|||||||
* TMC5130, TMC5130_STANDALONE
|
* TMC5130, TMC5130_STANDALONE
|
||||||
* :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
|
* :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
|
||||||
*/
|
*/
|
||||||
#define X_DRIVER_TYPE A4988
|
//#define X_DRIVER_TYPE A4988
|
||||||
#define Y_DRIVER_TYPE A4988
|
//#define Y_DRIVER_TYPE A4988
|
||||||
#define Z_DRIVER_TYPE A4988
|
//#define Z_DRIVER_TYPE A4988
|
||||||
#define X2_DRIVER_TYPE A4988
|
//#define X2_DRIVER_TYPE A4988
|
||||||
#define Y2_DRIVER_TYPE A4988
|
//#define Y2_DRIVER_TYPE A4988
|
||||||
#define Z2_DRIVER_TYPE A4988
|
//#define Z2_DRIVER_TYPE A4988
|
||||||
#define E0_DRIVER_TYPE A4988
|
//#define E0_DRIVER_TYPE A4988
|
||||||
#define E1_DRIVER_TYPE A4988
|
//#define E1_DRIVER_TYPE A4988
|
||||||
#define E2_DRIVER_TYPE A4988
|
//#define E2_DRIVER_TYPE A4988
|
||||||
#define E3_DRIVER_TYPE A4988
|
//#define E3_DRIVER_TYPE A4988
|
||||||
#define E4_DRIVER_TYPE A4988
|
//#define E4_DRIVER_TYPE A4988
|
||||||
|
|
||||||
// Enable this feature if all enabled endstop pins are interrupt-capable.
|
// Enable this feature if all enabled endstop pins are interrupt-capable.
|
||||||
// This will remove the need to poll the interrupt pins, saving many CPU cycles.
|
// This will remove the need to poll the interrupt pins, saving many CPU cycles.
|
||||||
|
@ -628,9 +628,12 @@
|
|||||||
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe.
|
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe.
|
||||||
|
|
||||||
/**
|
/**
|
||||||
* Specify Stepper Driver types
|
* Stepper Drivers
|
||||||
* The options are used to determine driver pulse timings as well as more advanced functionality.
|
*
|
||||||
* Stepper timing options can be overridden in Configuration_adv.h
|
* These settings allow Marlin to tune stepper driver timing and enable advanced options for
|
||||||
|
* stepper drivers that support them. You may also override timing options in Configuration_adv.h.
|
||||||
|
*
|
||||||
|
* A4988 is assumed for unspecified drivers.
|
||||||
*
|
*
|
||||||
* Options: A4988, A5984, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
|
* Options: A4988, A5984, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
|
||||||
* TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
|
* TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
|
||||||
@ -638,17 +641,17 @@
|
|||||||
* TMC5130, TMC5130_STANDALONE
|
* TMC5130, TMC5130_STANDALONE
|
||||||
* :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
|
* :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
|
||||||
*/
|
*/
|
||||||
#define X_DRIVER_TYPE A4988
|
//#define X_DRIVER_TYPE A4988
|
||||||
#define Y_DRIVER_TYPE A4988
|
//#define Y_DRIVER_TYPE A4988
|
||||||
#define Z_DRIVER_TYPE A4988
|
//#define Z_DRIVER_TYPE A4988
|
||||||
#define X2_DRIVER_TYPE A4988
|
//#define X2_DRIVER_TYPE A4988
|
||||||
#define Y2_DRIVER_TYPE A4988
|
//#define Y2_DRIVER_TYPE A4988
|
||||||
#define Z2_DRIVER_TYPE A4988
|
//#define Z2_DRIVER_TYPE A4988
|
||||||
#define E0_DRIVER_TYPE A4988
|
//#define E0_DRIVER_TYPE A4988
|
||||||
#define E1_DRIVER_TYPE A4988
|
//#define E1_DRIVER_TYPE A4988
|
||||||
#define E2_DRIVER_TYPE A4988
|
//#define E2_DRIVER_TYPE A4988
|
||||||
#define E3_DRIVER_TYPE A4988
|
//#define E3_DRIVER_TYPE A4988
|
||||||
#define E4_DRIVER_TYPE A4988
|
//#define E4_DRIVER_TYPE A4988
|
||||||
|
|
||||||
// Enable this feature if all enabled endstop pins are interrupt-capable.
|
// Enable this feature if all enabled endstop pins are interrupt-capable.
|
||||||
// This will remove the need to poll the interrupt pins, saving many CPU cycles.
|
// This will remove the need to poll the interrupt pins, saving many CPU cycles.
|
||||||
|
@ -618,9 +618,12 @@
|
|||||||
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe.
|
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe.
|
||||||
|
|
||||||
/**
|
/**
|
||||||
* Specify Stepper Driver types
|
* Stepper Drivers
|
||||||
* The options are used to determine driver pulse timings as well as more advanced functionality.
|
*
|
||||||
* Stepper timing options can be overridden in Configuration_adv.h
|
* These settings allow Marlin to tune stepper driver timing and enable advanced options for
|
||||||
|
* stepper drivers that support them. You may also override timing options in Configuration_adv.h.
|
||||||
|
*
|
||||||
|
* A4988 is assumed for unspecified drivers.
|
||||||
*
|
*
|
||||||
* Options: A4988, A5984, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
|
* Options: A4988, A5984, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
|
||||||
* TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
|
* TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
|
||||||
@ -628,17 +631,17 @@
|
|||||||
* TMC5130, TMC5130_STANDALONE
|
* TMC5130, TMC5130_STANDALONE
|
||||||
* :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
|
* :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
|
||||||
*/
|
*/
|
||||||
#define X_DRIVER_TYPE A4988
|
//#define X_DRIVER_TYPE A4988
|
||||||
#define Y_DRIVER_TYPE A4988
|
//#define Y_DRIVER_TYPE A4988
|
||||||
#define Z_DRIVER_TYPE A4988
|
//#define Z_DRIVER_TYPE A4988
|
||||||
#define X2_DRIVER_TYPE A4988
|
//#define X2_DRIVER_TYPE A4988
|
||||||
#define Y2_DRIVER_TYPE A4988
|
//#define Y2_DRIVER_TYPE A4988
|
||||||
#define Z2_DRIVER_TYPE A4988
|
//#define Z2_DRIVER_TYPE A4988
|
||||||
#define E0_DRIVER_TYPE A4988
|
//#define E0_DRIVER_TYPE A4988
|
||||||
#define E1_DRIVER_TYPE A4988
|
//#define E1_DRIVER_TYPE A4988
|
||||||
#define E2_DRIVER_TYPE A4988
|
//#define E2_DRIVER_TYPE A4988
|
||||||
#define E3_DRIVER_TYPE A4988
|
//#define E3_DRIVER_TYPE A4988
|
||||||
#define E4_DRIVER_TYPE A4988
|
//#define E4_DRIVER_TYPE A4988
|
||||||
|
|
||||||
// Enable this feature if all enabled endstop pins are interrupt-capable.
|
// Enable this feature if all enabled endstop pins are interrupt-capable.
|
||||||
// This will remove the need to poll the interrupt pins, saving many CPU cycles.
|
// This will remove the need to poll the interrupt pins, saving many CPU cycles.
|
||||||
|
@ -604,9 +604,12 @@
|
|||||||
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe.
|
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe.
|
||||||
|
|
||||||
/**
|
/**
|
||||||
* Specify Stepper Driver types
|
* Stepper Drivers
|
||||||
* The options are used to determine driver pulse timings as well as more advanced functionality.
|
*
|
||||||
* Stepper timing options can be overridden in Configuration_adv.h
|
* These settings allow Marlin to tune stepper driver timing and enable advanced options for
|
||||||
|
* stepper drivers that support them. You may also override timing options in Configuration_adv.h.
|
||||||
|
*
|
||||||
|
* A4988 is assumed for unspecified drivers.
|
||||||
*
|
*
|
||||||
* Options: A4988, A5984, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
|
* Options: A4988, A5984, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
|
||||||
* TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
|
* TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
|
||||||
@ -614,17 +617,17 @@
|
|||||||
* TMC5130, TMC5130_STANDALONE
|
* TMC5130, TMC5130_STANDALONE
|
||||||
* :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
|
* :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
|
||||||
*/
|
*/
|
||||||
#define X_DRIVER_TYPE A4988
|
//#define X_DRIVER_TYPE A4988
|
||||||
#define Y_DRIVER_TYPE A4988
|
//#define Y_DRIVER_TYPE A4988
|
||||||
#define Z_DRIVER_TYPE A4988
|
//#define Z_DRIVER_TYPE A4988
|
||||||
#define X2_DRIVER_TYPE A4988
|
//#define X2_DRIVER_TYPE A4988
|
||||||
#define Y2_DRIVER_TYPE A4988
|
//#define Y2_DRIVER_TYPE A4988
|
||||||
#define Z2_DRIVER_TYPE A4988
|
//#define Z2_DRIVER_TYPE A4988
|
||||||
#define E0_DRIVER_TYPE A4988
|
//#define E0_DRIVER_TYPE A4988
|
||||||
#define E1_DRIVER_TYPE A4988
|
//#define E1_DRIVER_TYPE A4988
|
||||||
#define E2_DRIVER_TYPE A4988
|
//#define E2_DRIVER_TYPE A4988
|
||||||
#define E3_DRIVER_TYPE A4988
|
//#define E3_DRIVER_TYPE A4988
|
||||||
#define E4_DRIVER_TYPE A4988
|
//#define E4_DRIVER_TYPE A4988
|
||||||
|
|
||||||
// Enable this feature if all enabled endstop pins are interrupt-capable.
|
// Enable this feature if all enabled endstop pins are interrupt-capable.
|
||||||
// This will remove the need to poll the interrupt pins, saving many CPU cycles.
|
// This will remove the need to poll the interrupt pins, saving many CPU cycles.
|
||||||
|
@ -622,9 +622,12 @@
|
|||||||
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe.
|
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe.
|
||||||
|
|
||||||
/**
|
/**
|
||||||
* Specify Stepper Driver types
|
* Stepper Drivers
|
||||||
* The options are used to determine driver pulse timings as well as more advanced functionality.
|
*
|
||||||
* Stepper timing options can be overridden in Configuration_adv.h
|
* These settings allow Marlin to tune stepper driver timing and enable advanced options for
|
||||||
|
* stepper drivers that support them. You may also override timing options in Configuration_adv.h.
|
||||||
|
*
|
||||||
|
* A4988 is assumed for unspecified drivers.
|
||||||
*
|
*
|
||||||
* Options: A4988, A5984, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
|
* Options: A4988, A5984, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
|
||||||
* TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
|
* TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
|
||||||
@ -632,17 +635,17 @@
|
|||||||
* TMC5130, TMC5130_STANDALONE
|
* TMC5130, TMC5130_STANDALONE
|
||||||
* :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
|
* :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
|
||||||
*/
|
*/
|
||||||
#define X_DRIVER_TYPE A4988
|
//#define X_DRIVER_TYPE A4988
|
||||||
#define Y_DRIVER_TYPE A4988
|
//#define Y_DRIVER_TYPE A4988
|
||||||
#define Z_DRIVER_TYPE A4988
|
//#define Z_DRIVER_TYPE A4988
|
||||||
#define X2_DRIVER_TYPE A4988
|
//#define X2_DRIVER_TYPE A4988
|
||||||
#define Y2_DRIVER_TYPE A4988
|
//#define Y2_DRIVER_TYPE A4988
|
||||||
#define Z2_DRIVER_TYPE A4988
|
//#define Z2_DRIVER_TYPE A4988
|
||||||
#define E0_DRIVER_TYPE A4988
|
//#define E0_DRIVER_TYPE A4988
|
||||||
#define E1_DRIVER_TYPE A4988
|
//#define E1_DRIVER_TYPE A4988
|
||||||
#define E2_DRIVER_TYPE A4988
|
//#define E2_DRIVER_TYPE A4988
|
||||||
#define E3_DRIVER_TYPE A4988
|
//#define E3_DRIVER_TYPE A4988
|
||||||
#define E4_DRIVER_TYPE A4988
|
//#define E4_DRIVER_TYPE A4988
|
||||||
|
|
||||||
// Enable this feature if all enabled endstop pins are interrupt-capable.
|
// Enable this feature if all enabled endstop pins are interrupt-capable.
|
||||||
// This will remove the need to poll the interrupt pins, saving many CPU cycles.
|
// This will remove the need to poll the interrupt pins, saving many CPU cycles.
|
||||||
|
@ -565,9 +565,12 @@
|
|||||||
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe.
|
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe.
|
||||||
|
|
||||||
/**
|
/**
|
||||||
* Specify Stepper Driver types
|
* Stepper Drivers
|
||||||
* The options are used to determine driver pulse timings as well as more advanced functionality.
|
*
|
||||||
* Stepper timing options can be overridden in Configuration_adv.h
|
* These settings allow Marlin to tune stepper driver timing and enable advanced options for
|
||||||
|
* stepper drivers that support them. You may also override timing options in Configuration_adv.h.
|
||||||
|
*
|
||||||
|
* A4988 is assumed for unspecified drivers.
|
||||||
*
|
*
|
||||||
* Options: A4988, A5984, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
|
* Options: A4988, A5984, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
|
||||||
* TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
|
* TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
|
||||||
@ -575,17 +578,17 @@
|
|||||||
* TMC5130, TMC5130_STANDALONE
|
* TMC5130, TMC5130_STANDALONE
|
||||||
* :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
|
* :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
|
||||||
*/
|
*/
|
||||||
#define X_DRIVER_TYPE A4988
|
//#define X_DRIVER_TYPE A4988
|
||||||
#define Y_DRIVER_TYPE A4988
|
//#define Y_DRIVER_TYPE A4988
|
||||||
#define Z_DRIVER_TYPE A4988
|
//#define Z_DRIVER_TYPE A4988
|
||||||
#define X2_DRIVER_TYPE A4988
|
//#define X2_DRIVER_TYPE A4988
|
||||||
#define Y2_DRIVER_TYPE A4988
|
//#define Y2_DRIVER_TYPE A4988
|
||||||
#define Z2_DRIVER_TYPE A4988
|
//#define Z2_DRIVER_TYPE A4988
|
||||||
#define E0_DRIVER_TYPE A4988
|
//#define E0_DRIVER_TYPE A4988
|
||||||
#define E1_DRIVER_TYPE A4988
|
//#define E1_DRIVER_TYPE A4988
|
||||||
#define E2_DRIVER_TYPE A4988
|
//#define E2_DRIVER_TYPE A4988
|
||||||
#define E3_DRIVER_TYPE A4988
|
//#define E3_DRIVER_TYPE A4988
|
||||||
#define E4_DRIVER_TYPE A4988
|
//#define E4_DRIVER_TYPE A4988
|
||||||
|
|
||||||
// Enable this feature if all enabled endstop pins are interrupt-capable.
|
// Enable this feature if all enabled endstop pins are interrupt-capable.
|
||||||
// This will remove the need to poll the interrupt pins, saving many CPU cycles.
|
// This will remove the need to poll the interrupt pins, saving many CPU cycles.
|
||||||
|
@ -555,9 +555,12 @@
|
|||||||
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe.
|
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe.
|
||||||
|
|
||||||
/**
|
/**
|
||||||
* Specify Stepper Driver types
|
* Stepper Drivers
|
||||||
* The options are used to determine driver pulse timings as well as more advanced functionality.
|
*
|
||||||
* Stepper timing options can be overridden in Configuration_adv.h
|
* These settings allow Marlin to tune stepper driver timing and enable advanced options for
|
||||||
|
* stepper drivers that support them. You may also override timing options in Configuration_adv.h.
|
||||||
|
*
|
||||||
|
* A4988 is assumed for unspecified drivers.
|
||||||
*
|
*
|
||||||
* Options: A4988, A5984, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
|
* Options: A4988, A5984, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
|
||||||
* TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
|
* TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
|
||||||
@ -565,17 +568,17 @@
|
|||||||
* TMC5130, TMC5130_STANDALONE
|
* TMC5130, TMC5130_STANDALONE
|
||||||
* :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
|
* :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
|
||||||
*/
|
*/
|
||||||
#define X_DRIVER_TYPE A4988
|
//#define X_DRIVER_TYPE A4988
|
||||||
#define Y_DRIVER_TYPE A4988
|
//#define Y_DRIVER_TYPE A4988
|
||||||
#define Z_DRIVER_TYPE A4988
|
//#define Z_DRIVER_TYPE A4988
|
||||||
#define X2_DRIVER_TYPE A4988
|
//#define X2_DRIVER_TYPE A4988
|
||||||
#define Y2_DRIVER_TYPE A4988
|
//#define Y2_DRIVER_TYPE A4988
|
||||||
#define Z2_DRIVER_TYPE A4988
|
//#define Z2_DRIVER_TYPE A4988
|
||||||
#define E0_DRIVER_TYPE A4988
|
//#define E0_DRIVER_TYPE A4988
|
||||||
#define E1_DRIVER_TYPE A4988
|
//#define E1_DRIVER_TYPE A4988
|
||||||
#define E2_DRIVER_TYPE A4988
|
//#define E2_DRIVER_TYPE A4988
|
||||||
#define E3_DRIVER_TYPE A4988
|
//#define E3_DRIVER_TYPE A4988
|
||||||
#define E4_DRIVER_TYPE A4988
|
//#define E4_DRIVER_TYPE A4988
|
||||||
|
|
||||||
// Enable this feature if all enabled endstop pins are interrupt-capable.
|
// Enable this feature if all enabled endstop pins are interrupt-capable.
|
||||||
// This will remove the need to poll the interrupt pins, saving many CPU cycles.
|
// This will remove the need to poll the interrupt pins, saving many CPU cycles.
|
||||||
|
@ -554,9 +554,12 @@
|
|||||||
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe.
|
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe.
|
||||||
|
|
||||||
/**
|
/**
|
||||||
* Specify Stepper Driver types
|
* Stepper Drivers
|
||||||
* The options are used to determine driver pulse timings as well as more advanced functionality.
|
*
|
||||||
* Stepper timing options can be overridden in Configuration_adv.h
|
* These settings allow Marlin to tune stepper driver timing and enable advanced options for
|
||||||
|
* stepper drivers that support them. You may also override timing options in Configuration_adv.h.
|
||||||
|
*
|
||||||
|
* A4988 is assumed for unspecified drivers.
|
||||||
*
|
*
|
||||||
* Options: A4988, A5984, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
|
* Options: A4988, A5984, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
|
||||||
* TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
|
* TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
|
||||||
@ -564,17 +567,17 @@
|
|||||||
* TMC5130, TMC5130_STANDALONE
|
* TMC5130, TMC5130_STANDALONE
|
||||||
* :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
|
* :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
|
||||||
*/
|
*/
|
||||||
#define X_DRIVER_TYPE A4988
|
//#define X_DRIVER_TYPE A4988
|
||||||
#define Y_DRIVER_TYPE A4988
|
//#define Y_DRIVER_TYPE A4988
|
||||||
#define Z_DRIVER_TYPE A4988
|
//#define Z_DRIVER_TYPE A4988
|
||||||
#define X2_DRIVER_TYPE A4988
|
//#define X2_DRIVER_TYPE A4988
|
||||||
#define Y2_DRIVER_TYPE A4988
|
//#define Y2_DRIVER_TYPE A4988
|
||||||
#define Z2_DRIVER_TYPE A4988
|
//#define Z2_DRIVER_TYPE A4988
|
||||||
#define E0_DRIVER_TYPE A4988
|
//#define E0_DRIVER_TYPE A4988
|
||||||
#define E1_DRIVER_TYPE A4988
|
//#define E1_DRIVER_TYPE A4988
|
||||||
#define E2_DRIVER_TYPE A4988
|
//#define E2_DRIVER_TYPE A4988
|
||||||
#define E3_DRIVER_TYPE A4988
|
//#define E3_DRIVER_TYPE A4988
|
||||||
#define E4_DRIVER_TYPE A4988
|
//#define E4_DRIVER_TYPE A4988
|
||||||
|
|
||||||
// Enable this feature if all enabled endstop pins are interrupt-capable.
|
// Enable this feature if all enabled endstop pins are interrupt-capable.
|
||||||
// This will remove the need to poll the interrupt pins, saving many CPU cycles.
|
// This will remove the need to poll the interrupt pins, saving many CPU cycles.
|
||||||
|
@ -557,9 +557,12 @@
|
|||||||
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe.
|
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe.
|
||||||
|
|
||||||
/**
|
/**
|
||||||
* Specify Stepper Driver types
|
* Stepper Drivers
|
||||||
* The options are used to determine driver pulse timings as well as more advanced functionality.
|
*
|
||||||
* Stepper timing options can be overridden in Configuration_adv.h
|
* These settings allow Marlin to tune stepper driver timing and enable advanced options for
|
||||||
|
* stepper drivers that support them. You may also override timing options in Configuration_adv.h.
|
||||||
|
*
|
||||||
|
* A4988 is assumed for unspecified drivers.
|
||||||
*
|
*
|
||||||
* Options: A4988, A5984, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
|
* Options: A4988, A5984, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
|
||||||
* TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
|
* TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
|
||||||
@ -567,17 +570,17 @@
|
|||||||
* TMC5130, TMC5130_STANDALONE
|
* TMC5130, TMC5130_STANDALONE
|
||||||
* :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
|
* :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
|
||||||
*/
|
*/
|
||||||
#define X_DRIVER_TYPE A4988
|
//#define X_DRIVER_TYPE A4988
|
||||||
#define Y_DRIVER_TYPE A4988
|
//#define Y_DRIVER_TYPE A4988
|
||||||
#define Z_DRIVER_TYPE A4988
|
//#define Z_DRIVER_TYPE A4988
|
||||||
#define X2_DRIVER_TYPE A4988
|
//#define X2_DRIVER_TYPE A4988
|
||||||
#define Y2_DRIVER_TYPE A4988
|
//#define Y2_DRIVER_TYPE A4988
|
||||||
#define Z2_DRIVER_TYPE A4988
|
//#define Z2_DRIVER_TYPE A4988
|
||||||
#define E0_DRIVER_TYPE A4988
|
//#define E0_DRIVER_TYPE A4988
|
||||||
#define E1_DRIVER_TYPE A4988
|
//#define E1_DRIVER_TYPE A4988
|
||||||
#define E2_DRIVER_TYPE A4988
|
//#define E2_DRIVER_TYPE A4988
|
||||||
#define E3_DRIVER_TYPE A4988
|
//#define E3_DRIVER_TYPE A4988
|
||||||
#define E4_DRIVER_TYPE A4988
|
//#define E4_DRIVER_TYPE A4988
|
||||||
|
|
||||||
// Enable this feature if all enabled endstop pins are interrupt-capable.
|
// Enable this feature if all enabled endstop pins are interrupt-capable.
|
||||||
// This will remove the need to poll the interrupt pins, saving many CPU cycles.
|
// This will remove the need to poll the interrupt pins, saving many CPU cycles.
|
||||||
|
@ -292,8 +292,7 @@
|
|||||||
#endif
|
#endif
|
||||||
|
|
||||||
#define _TMC2208_DEFINE_HARDWARE(ST) TMC2208Stepper stepper##ST(&ST##_HARDWARE_SERIAL)
|
#define _TMC2208_DEFINE_HARDWARE(ST) TMC2208Stepper stepper##ST(&ST##_HARDWARE_SERIAL)
|
||||||
#define _TMC2208_DEFINE_SOFTWARE(ST) SoftwareSerial ST##_HARDWARE_SERIAL = SoftwareSerial(ST##_SERIAL_RX_PIN, ST##_SERIAL_TX_PIN); \
|
#define _TMC2208_DEFINE_SOFTWARE(ST) TMC2208Stepper stepper##ST(ST##_SERIAL_RX_PIN, ST##_SERIAL_TX_PIN, ST##_SERIAL_RX_PIN > -1)
|
||||||
TMC2208Stepper stepper##ST(&ST##_HARDWARE_SERIAL, ST##_SERIAL_RX_PIN > -1)
|
|
||||||
|
|
||||||
// Stepper objects of TMC2208 steppers used
|
// Stepper objects of TMC2208 steppers used
|
||||||
#if AXIS_DRIVER_TYPE(X, TMC2208)
|
#if AXIS_DRIVER_TYPE(X, TMC2208)
|
||||||
@ -376,37 +375,81 @@
|
|||||||
|
|
||||||
void tmc2208_serial_begin() {
|
void tmc2208_serial_begin() {
|
||||||
#if AXIS_DRIVER_TYPE(X, TMC2208)
|
#if AXIS_DRIVER_TYPE(X, TMC2208)
|
||||||
|
#ifdef X_HARDWARE_SERIAL
|
||||||
X_HARDWARE_SERIAL.begin(115200);
|
X_HARDWARE_SERIAL.begin(115200);
|
||||||
|
#else
|
||||||
|
stepperX.beginSerial(115200);
|
||||||
|
#endif
|
||||||
#endif
|
#endif
|
||||||
#if AXIS_DRIVER_TYPE(X2, TMC2208)
|
#if AXIS_DRIVER_TYPE(X2, TMC2208)
|
||||||
|
#ifdef X2_HARDWARE_SERIAL
|
||||||
X2_HARDWARE_SERIAL.begin(115200);
|
X2_HARDWARE_SERIAL.begin(115200);
|
||||||
|
#else
|
||||||
|
stepperX2.beginSerial(115200);
|
||||||
|
#endif
|
||||||
#endif
|
#endif
|
||||||
#if AXIS_DRIVER_TYPE(Y, TMC2208)
|
#if AXIS_DRIVER_TYPE(Y, TMC2208)
|
||||||
|
#ifdef Y_HARDWARE_SERIAL
|
||||||
Y_HARDWARE_SERIAL.begin(115200);
|
Y_HARDWARE_SERIAL.begin(115200);
|
||||||
|
#else
|
||||||
|
stepperY.beginSerial(115200);
|
||||||
|
#endif
|
||||||
#endif
|
#endif
|
||||||
#if AXIS_DRIVER_TYPE(Y2, TMC2208)
|
#if AXIS_DRIVER_TYPE(Y2, TMC2208)
|
||||||
|
#ifdef Y2_HARDWARE_SERIAL
|
||||||
Y2_HARDWARE_SERIAL.begin(115200);
|
Y2_HARDWARE_SERIAL.begin(115200);
|
||||||
|
#else
|
||||||
|
stepperY2.beginSerial(115200);
|
||||||
|
#endif
|
||||||
#endif
|
#endif
|
||||||
#if AXIS_DRIVER_TYPE(Z, TMC2208)
|
#if AXIS_DRIVER_TYPE(Z, TMC2208)
|
||||||
|
#ifdef Z_HARDWARE_SERIAL
|
||||||
Z_HARDWARE_SERIAL.begin(115200);
|
Z_HARDWARE_SERIAL.begin(115200);
|
||||||
|
#else
|
||||||
|
stepperZ.beginSerial(115200);
|
||||||
|
#endif
|
||||||
#endif
|
#endif
|
||||||
#if AXIS_DRIVER_TYPE(Z2, TMC2208)
|
#if AXIS_DRIVER_TYPE(Z2, TMC2208)
|
||||||
|
#ifdef Z2_HARDWARE_SERIAL
|
||||||
Z2_HARDWARE_SERIAL.begin(115200);
|
Z2_HARDWARE_SERIAL.begin(115200);
|
||||||
|
#else
|
||||||
|
stepperZ2.beginSerial(115200);
|
||||||
|
#endif
|
||||||
#endif
|
#endif
|
||||||
#if AXIS_DRIVER_TYPE(E0, TMC2208)
|
#if AXIS_DRIVER_TYPE(E0, TMC2208)
|
||||||
|
#ifdef E0_HARDWARE_SERIAL
|
||||||
E0_HARDWARE_SERIAL.begin(115200);
|
E0_HARDWARE_SERIAL.begin(115200);
|
||||||
|
#else
|
||||||
|
stepperE0.beginSerial(115200);
|
||||||
|
#endif
|
||||||
#endif
|
#endif
|
||||||
#if AXIS_DRIVER_TYPE(E1, TMC2208)
|
#if AXIS_DRIVER_TYPE(E1, TMC2208)
|
||||||
|
#ifdef E1_HARDWARE_SERIAL
|
||||||
E1_HARDWARE_SERIAL.begin(115200);
|
E1_HARDWARE_SERIAL.begin(115200);
|
||||||
|
#else
|
||||||
|
stepperE1.beginSerial(115200);
|
||||||
|
#endif
|
||||||
#endif
|
#endif
|
||||||
#if AXIS_DRIVER_TYPE(E2, TMC2208)
|
#if AXIS_DRIVER_TYPE(E2, TMC2208)
|
||||||
|
#ifdef E2_HARDWARE_SERIAL
|
||||||
E2_HARDWARE_SERIAL.begin(115200);
|
E2_HARDWARE_SERIAL.begin(115200);
|
||||||
|
#else
|
||||||
|
stepperE2.beginSerial(115200);
|
||||||
|
#endif
|
||||||
#endif
|
#endif
|
||||||
#if AXIS_DRIVER_TYPE(E3, TMC2208)
|
#if AXIS_DRIVER_TYPE(E3, TMC2208)
|
||||||
|
#ifdef E3_HARDWARE_SERIAL
|
||||||
E3_HARDWARE_SERIAL.begin(115200);
|
E3_HARDWARE_SERIAL.begin(115200);
|
||||||
|
#else
|
||||||
|
stepperE3.beginSerial(115200);
|
||||||
|
#endif
|
||||||
#endif
|
#endif
|
||||||
#if AXIS_DRIVER_TYPE(E4, TMC2208)
|
#if AXIS_DRIVER_TYPE(E4, TMC2208)
|
||||||
|
#ifdef E4_HARDWARE_SERIAL
|
||||||
E4_HARDWARE_SERIAL.begin(115200);
|
E4_HARDWARE_SERIAL.begin(115200);
|
||||||
|
#else
|
||||||
|
stepperE4.beginSerial(115200);
|
||||||
|
#endif
|
||||||
#endif
|
#endif
|
||||||
}
|
}
|
||||||
|
|
||||||
|
Loading…
Reference in New Issue
Block a user