bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity

Added slowdown

Browse Source
This commit is contained in:
Erik van der Zalm
2011-11-14 20:04:29 +01:00
parent 331e82dcd3
commit 95126c09c0
2 changed files with 24 additions and 15 deletions
Download Patch File Download Diff File Expand all files Collapse all files

7
Marlin/Configuration.h
View File

@ -18,6 +18,9 @@
// if unwanted behavior is observed on a user's machine when running at very slow speeds.
#define MINIMUM_PLANNER_SPEED 2.0 // (mm/sec)
// If defined the movements slow down when the look ahead buffer is only half full
#define SLOWDOWN
// BASIC SETTINGS: select your board type, thermistor type, axis scaling, and endstop configuration
//// The following define selects which electronics board you have. Please choose the one that matches your setup
@ -210,7 +213,7 @@ const bool ENDSTOPS_INVERTING = true; // set to true to invert the logic of the
#define DEFAULT_MINTRAVELFEEDRATE 0
// minimum time in microseconds that a movement needs to take if the buffer is emptied. Increase this number if you see blobs while printing high speed & high detail. It will slowdown on the detailed stuff.
#define DEFAULT_MINSEGMENTTIME 20000
#define DEFAULT_MINSEGMENTTIME 20000 // Obsolete delete this
#define DEFAULT_XYJERK 30.0 // (mm/sec)
#define DEFAULT_ZJERK 0.4 // (mm/sec)
@ -269,7 +272,7 @@ const bool ENDSTOPS_INVERTING = true; // set to true to invert the logic of the
#define ULTIPANEL
#ifdef ULTIPANEL
#define NEWPANEL //enable this if you have a click-encoder panel
// #define NEWPANEL //enable this if you have a click-encoder panel
#define SDSUPPORT
#define ULTRA_LCD
#define LCD_WIDTH 20