bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity

Add DUAL_NOZZLE_DUPLICATION_MODE option

Browse Source
This commit is contained in:
Scott Lahteine 2016-07-20 10:25:06 -07:00
parent 260bbb3109
commit 91777dd76c
19 changed files with 89 additions and 18 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

3
Marlin/Configuration_adv.h
View File

@ -329,6 +329,9 @@
#define AXIS_RELATIVE_MODES {false, false, false, false} #define AXIS_RELATIVE_MODES {false, false, false, false}
// Allow duplication mode with a basic dual-nozzle extruder
//#define DUAL_NOZZLE_DUPLICATION_MODE
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. // By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false #define INVERT_X_STEP_PIN false
#define INVERT_Y_STEP_PIN false #define INVERT_Y_STEP_PIN false

17
Marlin/SanityCheck.h
View File

@ -572,6 +572,23 @@
#error "TEMP_SENSOR_1 is required with TEMP_SENSOR_1_AS_REDUNDANT." #error "TEMP_SENSOR_1 is required with TEMP_SENSOR_1_AS_REDUNDANT."
#endif #endif
/**
* Basic 2-nozzle duplication mode
*/
#if ENABLED(DUAL_NOZZLE_DUPLICATION_MODE)
#if HOTENDS != 2
#error "DUAL_NOZZLE_DUPLICATION_MODE requires exactly 2 hotends."
#elif ENABLED(DUAL_X_CARRIAGE)
#error "DUAL_NOZZLE_DUPLICATION_MODE is incompatible with DUAL_X_CARRIAGE."
#elif ENABLED(SINGLENOZZLE)
#error "DUAL_NOZZLE_DUPLICATION_MODE is incompatible with SINGLENOZZLE."
#elif ENABLED(MIXING_EXTRUDER)
#error "DUAL_NOZZLE_DUPLICATION_MODE is incompatible with MIXING_EXTRUDER."
#elif ENABLED(SWITCHING_EXTRUDER)
#error "DUAL_NOZZLE_DUPLICATION_MODE is incompatible with SWITCHING_EXTRUDER."
#endif
#endif
/** /**
* Test Extruder Pins * Test Extruder Pins
*/ */

3
Marlin/example_configurations/Cartesio/Configuration_adv.h
View File

@ -329,6 +329,9 @@
#define AXIS_RELATIVE_MODES {false, false, false, false} #define AXIS_RELATIVE_MODES {false, false, false, false}
// Allow duplication mode with a basic dual-nozzle extruder
//#define DUAL_NOZZLE_DUPLICATION_MODE
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. // By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false #define INVERT_X_STEP_PIN false
#define INVERT_Y_STEP_PIN false #define INVERT_Y_STEP_PIN false

3
Marlin/example_configurations/Felix/Configuration_adv.h
View File

@ -329,6 +329,9 @@
#define AXIS_RELATIVE_MODES {false, false, false, false} #define AXIS_RELATIVE_MODES {false, false, false, false}
// Allow duplication mode with a basic dual-nozzle extruder
//#define DUAL_NOZZLE_DUPLICATION_MODE
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. // By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false #define INVERT_X_STEP_PIN false
#define INVERT_Y_STEP_PIN false #define INVERT_Y_STEP_PIN false

3
Marlin/example_configurations/Hephestos/Configuration_adv.h
View File

@ -329,6 +329,9 @@
#define AXIS_RELATIVE_MODES {false, false, false, false} #define AXIS_RELATIVE_MODES {false, false, false, false}
// Allow duplication mode with a basic dual-nozzle extruder
//#define DUAL_NOZZLE_DUPLICATION_MODE
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. // By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false #define INVERT_X_STEP_PIN false
#define INVERT_Y_STEP_PIN false #define INVERT_Y_STEP_PIN false

3
Marlin/example_configurations/Hephestos_2/Configuration_adv.h
View File

@ -329,6 +329,9 @@
#define AXIS_RELATIVE_MODES {false, false, false, false} #define AXIS_RELATIVE_MODES {false, false, false, false}
// Allow duplication mode with a basic dual-nozzle extruder
//#define DUAL_NOZZLE_DUPLICATION_MODE
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. // By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false #define INVERT_X_STEP_PIN false
#define INVERT_Y_STEP_PIN false #define INVERT_Y_STEP_PIN false

3
Marlin/example_configurations/K8200/Configuration_adv.h
View File

@ -335,6 +335,9 @@
#define AXIS_RELATIVE_MODES {false, false, false, false} #define AXIS_RELATIVE_MODES {false, false, false, false}
// Allow duplication mode with a basic dual-nozzle extruder
//#define DUAL_NOZZLE_DUPLICATION_MODE
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. // By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false #define INVERT_X_STEP_PIN false
#define INVERT_Y_STEP_PIN false #define INVERT_Y_STEP_PIN false

3
Marlin/example_configurations/K8400/Configuration_adv.h
View File

@ -329,6 +329,9 @@
#define AXIS_RELATIVE_MODES {false, false, false, false} #define AXIS_RELATIVE_MODES {false, false, false, false}
// Allow duplication mode with a basic dual-nozzle extruder
//#define DUAL_NOZZLE_DUPLICATION_MODE
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. // By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false #define INVERT_X_STEP_PIN false
#define INVERT_Y_STEP_PIN false #define INVERT_Y_STEP_PIN false

3
Marlin/example_configurations/RigidBot/Configuration_adv.h
View File

@ -329,6 +329,9 @@
#define AXIS_RELATIVE_MODES {false, false, false, false} #define AXIS_RELATIVE_MODES {false, false, false, false}
// Allow duplication mode with a basic dual-nozzle extruder
//#define DUAL_NOZZLE_DUPLICATION_MODE
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. // By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false #define INVERT_X_STEP_PIN false
#define INVERT_Y_STEP_PIN false #define INVERT_Y_STEP_PIN false

3
Marlin/example_configurations/SCARA/Configuration_adv.h
View File

@ -329,6 +329,9 @@
#define AXIS_RELATIVE_MODES {false, false, false, false} #define AXIS_RELATIVE_MODES {false, false, false, false}
// Allow duplication mode with a basic dual-nozzle extruder
//#define DUAL_NOZZLE_DUPLICATION_MODE
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. // By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false #define INVERT_X_STEP_PIN false
#define INVERT_Y_STEP_PIN false #define INVERT_Y_STEP_PIN false

3
Marlin/example_configurations/TAZ4/Configuration_adv.h
View File

@ -337,6 +337,9 @@
#define AXIS_RELATIVE_MODES {false, false, false, false} #define AXIS_RELATIVE_MODES {false, false, false, false}
// Allow duplication mode with a basic dual-nozzle extruder
//#define DUAL_NOZZLE_DUPLICATION_MODE
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. // By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false #define INVERT_X_STEP_PIN false
#define INVERT_Y_STEP_PIN false #define INVERT_Y_STEP_PIN false

3
Marlin/example_configurations/WITBOX/Configuration_adv.h
View File

@ -329,6 +329,9 @@
#define AXIS_RELATIVE_MODES {false, false, false, false} #define AXIS_RELATIVE_MODES {false, false, false, false}
// Allow duplication mode with a basic dual-nozzle extruder
//#define DUAL_NOZZLE_DUPLICATION_MODE
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. // By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false #define INVERT_X_STEP_PIN false
#define INVERT_Y_STEP_PIN false #define INVERT_Y_STEP_PIN false

3
Marlin/example_configurations/delta/biv2.5/Configuration_adv.h
View File

@ -329,6 +329,9 @@
#define AXIS_RELATIVE_MODES {false, false, false, false} #define AXIS_RELATIVE_MODES {false, false, false, false}
// Allow duplication mode with a basic dual-nozzle extruder
//#define DUAL_NOZZLE_DUPLICATION_MODE
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. // By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false #define INVERT_X_STEP_PIN false
#define INVERT_Y_STEP_PIN false #define INVERT_Y_STEP_PIN false

3
Marlin/example_configurations/delta/generic/Configuration_adv.h
View File

@ -329,6 +329,9 @@
#define AXIS_RELATIVE_MODES {false, false, false, false} #define AXIS_RELATIVE_MODES {false, false, false, false}
// Allow duplication mode with a basic dual-nozzle extruder
//#define DUAL_NOZZLE_DUPLICATION_MODE
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. // By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false #define INVERT_X_STEP_PIN false
#define INVERT_Y_STEP_PIN false #define INVERT_Y_STEP_PIN false

3
Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h
View File

@ -329,6 +329,9 @@
#define AXIS_RELATIVE_MODES {false, false, false, false} #define AXIS_RELATIVE_MODES {false, false, false, false}
// Allow duplication mode with a basic dual-nozzle extruder
//#define DUAL_NOZZLE_DUPLICATION_MODE
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. // By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false #define INVERT_X_STEP_PIN false
#define INVERT_Y_STEP_PIN false #define INVERT_Y_STEP_PIN false

3
Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h
View File

@ -334,6 +334,9 @@
#define AXIS_RELATIVE_MODES {false, false, false, false} #define AXIS_RELATIVE_MODES {false, false, false, false}
// Allow duplication mode with a basic dual-nozzle extruder
//#define DUAL_NOZZLE_DUPLICATION_MODE
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. // By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false #define INVERT_X_STEP_PIN false
#define INVERT_Y_STEP_PIN false #define INVERT_Y_STEP_PIN false

3
Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h
View File

@ -329,6 +329,9 @@
#define AXIS_RELATIVE_MODES {false, false, false, false} #define AXIS_RELATIVE_MODES {false, false, false, false}
// Allow duplication mode with a basic dual-nozzle extruder
//#define DUAL_NOZZLE_DUPLICATION_MODE
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. // By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false #define INVERT_X_STEP_PIN false
#define INVERT_Y_STEP_PIN false #define INVERT_Y_STEP_PIN false

3
Marlin/example_configurations/makibox/Configuration_adv.h
View File

@ -329,6 +329,9 @@
#define AXIS_RELATIVE_MODES {false, false, false, false} #define AXIS_RELATIVE_MODES {false, false, false, false}
// Allow duplication mode with a basic dual-nozzle extruder
//#define DUAL_NOZZLE_DUPLICATION_MODE
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. // By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false #define INVERT_X_STEP_PIN false
#define INVERT_Y_STEP_PIN false #define INVERT_Y_STEP_PIN false

3
Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h
View File

@ -329,6 +329,9 @@
#define AXIS_RELATIVE_MODES {false, false, false, false} #define AXIS_RELATIVE_MODES {false, false, false, false}
// Allow duplication mode with a basic dual-nozzle extruder
//#define DUAL_NOZZLE_DUPLICATION_MODE
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. // By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false #define INVERT_X_STEP_PIN false
#define INVERT_Y_STEP_PIN false #define INVERT_Y_STEP_PIN false