Revert at90usb1286 conditional (#19733)

This commit is contained in:
Jason Smith 2020-10-14 11:48:46 -07:00 committed by GitHub
parent 79d51581ba
commit 90d364fc37
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
7 changed files with 16 additions and 16 deletions

View File

@ -25,7 +25,7 @@
#include "watchdog.h"
#include "math.h"
#ifdef IS_AT90USB
#ifdef USBCON
#include <HardwareSerial.h>
#else
#define HardwareSerial_h // Hack to prevent HardwareSerial.h header inclusion
@ -81,7 +81,7 @@ typedef int8_t pin_t;
//extern uint8_t MCUSR;
// Serial ports
#ifdef IS_AT90USB
#ifdef USBCON
#define MYSERIAL0 TERN(BLUETOOTH, bluetoothSerial, Serial)
#else
#if !WITHIN(SERIAL_PORT, -1, 3)

View File

@ -38,7 +38,7 @@
#include "../../inc/MarlinConfig.h"
#if !IS_AT90USB && (defined(UBRRH) || defined(UBRR0H) || defined(UBRR1H) || defined(UBRR2H) || defined(UBRR3H))
#if !defined(USBCON) && (defined(UBRRH) || defined(UBRR0H) || defined(UBRR1H) || defined(UBRR2H) || defined(UBRR3H))
#include "MarlinSerial.h"
#include "../../MarlinCore.h"
@ -792,10 +792,10 @@ MarlinSerial<MarlinSerialCfg<SERIAL_PORT>> customizedSerial1;
#endif
#endif // !IS_AT90USB && (UBRRH || UBRR0H || UBRR1H || UBRR2H || UBRR3H)
#endif // !USBCON && (UBRRH || UBRR0H || UBRR1H || UBRR2H || UBRR3H)
// For AT90USB targets use the UART for BT interfacing
#if BOTH(IS_AT90USB, BLUETOOTH)
#if defined(USBCON) && ENABLED(BLUETOOTH)
HardwareSerial bluetoothSerial;
#endif

View File

@ -327,6 +327,6 @@
#endif
// Use the UART for Bluetooth in AT90USB configurations
#if BOTH(IS_AT90USB, BLUETOOTH)
#if defined(USBCON) && ENABLED(BLUETOOTH)
extern HardwareSerial bluetoothSerial;
#endif

View File

@ -55,7 +55,7 @@ void GcodeSuite::M111() {
}
else {
SERIAL_ECHOPGM(STR_DEBUG_OFF);
#if !IS_AT90USB
#if !defined(__AVR__) || !defined(USBCON)
#if ENABLED(SERIAL_STATS_RX_BUFFER_OVERRUNS)
SERIAL_ECHOPAIR("\nBuffer Overruns: ", MYSERIAL0.buffer_overruns());
#endif
@ -71,7 +71,7 @@ void GcodeSuite::M111() {
#if ENABLED(SERIAL_STATS_MAX_RX_QUEUED)
SERIAL_ECHOPAIR("\nMax RX Queue Size: ", MYSERIAL0.rxMaxEnqueued());
#endif
#endif // !IS_AT90USB
#endif // !__AVR__ || !USBCON
}
SERIAL_EOL();
}

View File

@ -624,7 +624,7 @@ void GCodeQueue::advance() {
card.closefile();
SERIAL_ECHOLNPGM(STR_FILE_SAVED);
#if !IS_AT90USB
#if !defined(__AVR__) || !defined(USBCON)
#if ENABLED(SERIAL_STATS_DROPPED_RX)
SERIAL_ECHOLNPAIR("Dropped bytes: ", MYSERIAL0.dropped());
#endif

View File

@ -208,10 +208,7 @@
#define NEEDS_HARDWARE_PWM 1
#endif
#if defined(__AVR__) && defined(USBCON)
#define IS_AT90USB 1
#undef SERIAL_XON_XOFF // Not supported on USB-native devices
#else
#if !defined(__AVR__) || !defined(USBCON)
// Define constants and variables for buffering serial data.
// Use only 0 or powers of 2 greater than 1
// : [0, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048, ...]
@ -223,6 +220,9 @@
#ifndef TX_BUFFER_SIZE
#define TX_BUFFER_SIZE 32
#endif
#else
// SERIAL_XON_XOFF not supported on USB-native devices
#undef SERIAL_XON_XOFF
#endif
#if ENABLED(HOST_ACTION_COMMANDS)

View File

@ -582,7 +582,7 @@
/**
* Serial
*/
#if !IS_AT90USB
#if !(defined(__AVR__) && defined(USBCON))
#if ENABLED(SERIAL_XON_XOFF) && RX_BUFFER_SIZE < 1024
#error "SERIAL_XON_XOFF requires RX_BUFFER_SIZE >= 1024 for reliable transfers without drops."
#elif RX_BUFFER_SIZE && (RX_BUFFER_SIZE < 2 || !IS_POWER_OF_2(RX_BUFFER_SIZE))
@ -2108,9 +2108,9 @@ static_assert(hbm[Z_AXIS] >= 0, "HOMING_BUMP_MM.Z must be greater than or equal
#endif
/**
* Emergency Command Parser
* emergency-command parser
*/
#if BOTH(IS_AT90USB, EMERGENCY_PARSER)
#if ENABLED(EMERGENCY_PARSER) && defined(__AVR__) && defined(USBCON)
#error "EMERGENCY_PARSER does not work on boards with AT90USB processors (USBCON)."
#endif