Clean up HAL trailing spaces, MKS SBASE pins
This commit is contained in:
Scott Lahteine
@@ -43,12 +43,6 @@
|
||||
#define D58 58
|
||||
*/
|
||||
|
||||
|
||||
//
|
||||
// Servos
|
||||
//
|
||||
|
||||
|
||||
//
|
||||
// Limit Switches
|
||||
//
|
||||
@@ -59,8 +53,6 @@
|
||||
#define Z_MIN_PIN 19 //The original Mks Sbase DIO19 has a 10k pullup to 3.3V or 5V, 1K series, so when using a Zprobe we must use DIO41 (J8 P1.22)
|
||||
#define Z_MAX_PIN 18 //10k pullup to 3.3V, 1K series
|
||||
|
||||
|
||||
|
||||
//
|
||||
// Steppers
|
||||
//
|
||||
@@ -84,35 +76,32 @@
|
||||
#define E1_DIR_PIN 34
|
||||
#define E1_ENABLE_PIN 30
|
||||
|
||||
|
||||
#define X2_STEP_PIN 36
|
||||
#define X2_DIR_PIN 34
|
||||
#define X2_ENABLE_PIN 30
|
||||
|
||||
|
||||
//
|
||||
// Temperature Sensors
|
||||
// 3.3V max when defined as an analog input
|
||||
// 3.3V max when defined as an analog input
|
||||
//
|
||||
|
||||
|
||||
#define TEMP_0_PIN 0 //A0 (TH1)
|
||||
#define TEMP_BED_PIN 1 //A1 (TH2)
|
||||
#define TEMP_1_PIN 2 //A2 (TH3)
|
||||
#define TEMP_2_PIN 3 //A3 (TH4)
|
||||
#define TEMP_0_PIN 0 // A0 (TH1)
|
||||
#define TEMP_BED_PIN 1 // A1 (TH2)
|
||||
#define TEMP_1_PIN 2 // A2 (TH3)
|
||||
#define TEMP_2_PIN 3 // A3 (TH4)
|
||||
|
||||
|
||||
//
|
||||
// Heaters / Fans
|
||||
//
|
||||
|
||||
#define HEATER_BED_PIN 10
|
||||
#define HEATER_BED_PIN 10
|
||||
#define HEATER_0_PIN 8
|
||||
#define HEATER_1_PIN 59
|
||||
#define HEATER_1_PIN 59
|
||||
#define FAN_PIN 9
|
||||
|
||||
|
||||
#define PS_ON_PIN 69
|
||||
#define PS_ON_PIN 69
|
||||
|
||||
|
||||
//
|
||||
@@ -122,9 +111,9 @@
|
||||
// 5V
|
||||
// NC
|
||||
// GND
|
||||
#define PIN_P0_17 50
|
||||
#define PIN_P0_16 16
|
||||
#define PIN_P0_14 80
|
||||
#define PIN_P0_17 50
|
||||
#define PIN_P0_16 16
|
||||
#define PIN_P0_14 80
|
||||
|
||||
|
||||
//
|
||||
@@ -132,21 +121,19 @@
|
||||
//
|
||||
|
||||
// GND
|
||||
#define PIN_P1_22 41
|
||||
#define PIN_P1_23 53
|
||||
#define PIN_P2_12 12
|
||||
#define PIN_P2_11 35
|
||||
#define PIN_P4_28 13
|
||||
|
||||
#define PIN_P1_22 41
|
||||
#define PIN_P1_23 53
|
||||
#define PIN_P2_12 12
|
||||
#define PIN_P2_11 35
|
||||
#define PIN_P4_28 13
|
||||
|
||||
//
|
||||
// Prusa i3 MK2 Multi Material Multiplexer Support
|
||||
//
|
||||
|
||||
|
||||
#define E_MUX0_PIN 50 // J7-4
|
||||
#define E_MUX1_PIN 16 // J7-5
|
||||
#define E_MUX2_PIN 80 // J7-6
|
||||
#define E_MUX0_PIN 50 // J7-4
|
||||
#define E_MUX1_PIN 16 // J7-5
|
||||
#define E_MUX2_PIN 80 // J7-6
|
||||
|
||||
|
||||
/**
|
||||
@@ -162,72 +149,38 @@
|
||||
* that the garbage/lines are erased immediately after the SD card accesses are completed.
|
||||
*/
|
||||
|
||||
#if ENABLED(ULTRA_LCD) //
|
||||
|
||||
#define BEEPER_PIN 49 // EXP1.1
|
||||
|
||||
#define BTN_ENC 37 // EXP1.2
|
||||
#define BTN_EN1 31 // EXP2.5
|
||||
#define BTN_EN2 33 // EXP2.3
|
||||
|
||||
#define SD_DETECT_PIN 57 // EXP2.7
|
||||
#define KILL_PIN -1 // Not connected
|
||||
#define LCD_PINS_RS 16 // EXP1.4
|
||||
#define LCD_SDSS 58 // EXP2.4
|
||||
#define LCD_BACKLIGHT_PIN -1 // Not connected
|
||||
#define LCD_PINS_ENABLE 51 // EXP1.3
|
||||
#define LCD_PINS_D4 80 // EXP1.5
|
||||
|
||||
#define DOGLCD_A0 -1 // Not connected
|
||||
#define DOGLCD_CS -1 // Not connected
|
||||
|
||||
#ifdef ULTIPANEL
|
||||
|
||||
#define LCD_PINS_D5 -1 // EXP1.6 Not connected
|
||||
#define LCD_PINS_D6 -1 // EXP1.7 Not connected
|
||||
#define LCD_PINS_D7 -1 // EXP1.8 Not connected
|
||||
#endif
|
||||
|
||||
|
||||
#if ENABLED(SDSUPPORT)
|
||||
#define SDCARD_SORT_ALPHA // Using SORT feature to keep one directory level in RAM
|
||||
// When going up/down directory levels the SD card is
|
||||
// accessed but the garbage/lines are removed when the
|
||||
// LCD updates
|
||||
|
||||
// SD Card Sorting options
|
||||
#if ENABLED(SDCARD_SORT_ALPHA)
|
||||
#define SDSORT_LIMIT 255 // Maximum number of sorted items (10-256).
|
||||
#define FOLDER_SORTING -1 // -1=above 0=none 1=below
|
||||
#define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code.
|
||||
#define SDSORT_USES_RAM true // Pre-allocate a static array for faster pre-sorting.
|
||||
#define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.)
|
||||
#define SDSORT_CACHE_NAMES true // Keep sorted items in RAM longer for speedy performance. Most expensive option.
|
||||
#define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use!
|
||||
#endif
|
||||
#endif
|
||||
#if ENABLED(ULTRA_LCD)
|
||||
#define BEEPER_PIN 49 // EXP1.1
|
||||
#define BTN_ENC 37 // EXP1.2
|
||||
#define BTN_EN1 31 // EXP2.5
|
||||
#define BTN_EN2 33 // EXP2.3
|
||||
#define SD_DETECT_PIN 57 // EXP2.7
|
||||
#define LCD_PINS_RS 16 // EXP1.4
|
||||
#define LCD_SDSS 58 // EXP2.4
|
||||
#define LCD_PINS_ENABLE 51 // EXP1.3
|
||||
#define LCD_PINS_D4 80 // EXP1.5
|
||||
#endif // ULTRA_LCD
|
||||
|
||||
//
|
||||
// Ethernet pins
|
||||
//
|
||||
#ifndef ULTIPANEL
|
||||
#define ENET_MDIO 71 // J12-4
|
||||
#define ENET_RX_ER 73 // J12-6
|
||||
#define ENET_RXD1 75 // J12-8
|
||||
#define ENET_MDIO 71 // J12-4
|
||||
#define ENET_RX_ER 73 // J12-6
|
||||
#define ENET_RXD1 75 // J12-8
|
||||
#endif
|
||||
#define ENET_MOC 70 // J12-3
|
||||
#define REF_CLK 72 // J12-5
|
||||
#define ENET_RXD0 74 // J12-7
|
||||
#define ENET_CRS 76 // J12-9
|
||||
#define ENET_TX_EN 77 // J12-10
|
||||
#define ENET_TXD0 78 // J12-11
|
||||
#define ENET_TXD1 79 // J12-12
|
||||
#define ENET_MOC 70 // J12-3
|
||||
#define REF_CLK 72 // J12-5
|
||||
#define ENET_RXD0 74 // J12-7
|
||||
#define ENET_CRS 76 // J12-9
|
||||
#define ENET_TX_EN 77 // J12-10
|
||||
#define ENET_TXD0 78 // J12-11
|
||||
#define ENET_TXD1 79 // J12-12
|
||||
|
||||
/**
|
||||
* PWMS
|
||||
* PWMs
|
||||
*
|
||||
* There are 6 PWMS. Each PWM can be assigned to one of two pins.
|
||||
* There are 6 PWMs. Each PWM can be assigned to one of two pins.
|
||||
*
|
||||
* SERVO2 does NOT have a PWM assigned to it.
|
||||
*
|
||||
@@ -245,12 +198,11 @@
|
||||
* PWM1.6 DIO10 RAMPS_D10_PIN
|
||||
*/
|
||||
|
||||
|
||||
/**
|
||||
* special pins
|
||||
* Special pins
|
||||
* D37 - not 5V tolerant
|
||||
* D49 - not 5V tolerant
|
||||
* D57 - open collector
|
||||
* D58 - open collector
|
||||
*
|
||||
*/
|
||||
*/
|
||||
|
||||
Reference in New Issue
Block a user