Add Makeboard MINI for Micromake C1
This commit is contained in:
Scott Lahteine
parent
1fbb307aaf
commit
8c78f8f790
@ -119,7 +119,7 @@
|
||||
// The following define selects which electronics board you have.
|
||||
// Please choose the name from boards.h that matches your setup
|
||||
#ifndef MOTHERBOARD
|
||||
#define MOTHERBOARD BOARD_RAMPS_14_EFB
|
||||
#define MOTHERBOARD BOARD_MAKEBOARD_MINI
|
||||
#endif
|
||||
|
||||
// Optional custom name for your RepStrap or other custom machine
|
||||
@ -498,7 +498,7 @@
|
||||
|
||||
// Enable this feature if all enabled endstop pins are interrupt-capable.
|
||||
// This will remove the need to poll the interrupt pins, saving many CPU cycles.
|
||||
#define ENDSTOP_INTERRUPTS_FEATURE
|
||||
//#define ENDSTOP_INTERRUPTS_FEATURE
|
||||
|
||||
//=============================================================================
|
||||
//============================== Movement Settings ============================
|
||||
@ -525,14 +525,18 @@
|
||||
* Override with M92
|
||||
* X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
|
||||
*/
|
||||
#define DEFAULT_AXIS_STEPS_PER_UNIT { 100, 100, 100, 150 } // MicroMake 128 Steps
|
||||
// choose your micro step per step configuration ( 16 factory settings )
|
||||
#define DEFAULT_AXIS_STEPS_PER_UNIT { 100, 100, 100, 150 } // 16 steps per unit for Micromake C1 - Factory Settings - ( MS1 : closed ; MS2 : closed on MAKEBOARD Mini)
|
||||
//#define DEFAULT_AXIS_STEPS_PER_UNIT { 200, 200, 200, 300 } // 32 steps per unit for Micromake C1 - Custom Settings - ( MS1 : closed ; MS2 : open on MAKEBOARD Mini)
|
||||
//#define DEFAULT_AXIS_STEPS_PER_UNIT { 400, 400, 400, 600 } // 64 steps per unit for Micromake C1 - Custom Settings - ( MS1 : open ; MS2 : closed on MAKEBOARD Mini)
|
||||
//#define DEFAULT_AXIS_STEPS_PER_UNIT { 800, 800, 800, 1200 } // 128 steps per unit for Micromake C1 - Custom Settings - ( MS1 : open ; MS2 : open on MAKEBOARD Mini)
|
||||
|
||||
/**
|
||||
* Default Max Feed Rate (mm/s)
|
||||
* Override with M203
|
||||
* X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
|
||||
*/
|
||||
#define DEFAULT_MAX_FEEDRATE { 200, 200, 200, 30 } // MicroMake 128 Steps
|
||||
#define DEFAULT_MAX_FEEDRATE { 200, 200, 200, 30 }
|
||||
|
||||
/**
|
||||
* Default Max Acceleration (change/s) change = mm/s
|
||||
@ -540,7 +544,7 @@
|
||||
* Override with M201
|
||||
* X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
|
||||
*/
|
||||
#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 3000, 4000 } // MicroMake 128 Steps
|
||||
#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 3000, 4000 }
|
||||
|
||||
/**
|
||||
* Default Acceleration (change/s) change = mm/s
|
||||
@ -550,9 +554,9 @@
|
||||
* M204 R Retract Acceleration
|
||||
* M204 T Travel Acceleration
|
||||
*/
|
||||
#define DEFAULT_ACCELERATION 1000 // X, Y, Z and E acceleration for printing moves
|
||||
#define DEFAULT_RETRACT_ACCELERATION 1000 // E acceleration for retracts
|
||||
#define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves
|
||||
#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves
|
||||
#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts
|
||||
#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves
|
||||
|
||||
/**
|
||||
* Default Jerk (mm/s)
|
||||
@ -562,10 +566,10 @@
|
||||
* When changing speed and direction, if the difference is less than the
|
||||
* value set here, it may happen instantaneously.
|
||||
*/
|
||||
#define DEFAULT_XJERK 20.0 // (mm/sec)
|
||||
#define DEFAULT_YJERK 20.0 // (mm/sec)
|
||||
#define DEFAULT_ZJERK 20.0 // (mm/sec)
|
||||
#define DEFAULT_EJERK 5.0 // (mm/sec)
|
||||
#define DEFAULT_XJERK 20.0
|
||||
#define DEFAULT_YJERK 20.0
|
||||
#define DEFAULT_ZJERK 20.0
|
||||
#define DEFAULT_EJERK 5.0
|
||||
|
||||
//===========================================================================
|
||||
//============================= Z Probe Options =============================
|
||||
@ -774,15 +778,16 @@
|
||||
// @section machine
|
||||
|
||||
// The size of the print bed
|
||||
#define X_BED_SIZE 245
|
||||
#define Y_BED_SIZE 245
|
||||
#define X_BED_SIZE 240
|
||||
#define Y_BED_SIZE 240
|
||||
|
||||
// Travel limits (mm) after homing, corresponding to endstop positions.
|
||||
#define X_MIN_POS 0
|
||||
#define Y_MIN_POS 0
|
||||
#define Z_MIN_POS 0
|
||||
#define X_MAX_POS X_BED_SIZE
|
||||
#define Y_MAX_POS Y_BED_SIZE
|
||||
#define Z_MAX_POS 263
|
||||
#define Z_MAX_POS 260
|
||||
|
||||
/**
|
||||
* Software Endstops
|
||||
@ -890,9 +895,9 @@
|
||||
|
||||
// Set the boundaries for probing (where the probe can reach).
|
||||
#define LEFT_PROBE_BED_POSITION 15
|
||||
#define RIGHT_PROBE_BED_POSITION 140
|
||||
#define RIGHT_PROBE_BED_POSITION 170
|
||||
#define FRONT_PROBE_BED_POSITION 20
|
||||
#define BACK_PROBE_BED_POSITION 200
|
||||
#define BACK_PROBE_BED_POSITION 170
|
||||
|
||||
// The Z probe minimum outer margin (to validate G29 parameters).
|
||||
#define MIN_PROBE_EDGE 10
|
||||
@ -923,10 +928,10 @@
|
||||
// 3 arbitrary points to probe.
|
||||
// A simple cross-product is used to estimate the plane of the bed.
|
||||
#define ABL_PROBE_PT_1_X 15
|
||||
#define ABL_PROBE_PT_1_Y 140
|
||||
#define ABL_PROBE_PT_1_Y 180
|
||||
#define ABL_PROBE_PT_2_X 15
|
||||
#define ABL_PROBE_PT_2_Y 20
|
||||
#define ABL_PROBE_PT_3_X 200
|
||||
#define ABL_PROBE_PT_3_X 170
|
||||
#define ABL_PROBE_PT_3_Y 20
|
||||
|
||||
#elif ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
@ -1051,12 +1056,12 @@
|
||||
//
|
||||
// G20/G21 Inch mode support
|
||||
//
|
||||
//#define INCH_MODE_SUPPORT
|
||||
#define INCH_MODE_SUPPORT
|
||||
|
||||
//
|
||||
// M149 Set temperature units support
|
||||
//
|
||||
//#define TEMPERATURE_UNITS_SUPPORT
|
||||
#define TEMPERATURE_UNITS_SUPPORT
|
||||
|
||||
// @section temperature
|
||||
|
||||
@ -1080,7 +1085,7 @@
|
||||
* P1 Raise the nozzle always to Z-park height.
|
||||
* P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS.
|
||||
*/
|
||||
//#define NOZZLE_PARK_FEATURE
|
||||
#define NOZZLE_PARK_FEATURE
|
||||
|
||||
#if ENABLED(NOZZLE_PARK_FEATURE)
|
||||
// Specify a park position as { X, Y, Z }
|
||||
@ -1125,7 +1130,7 @@
|
||||
* Attention: EXPERIMENTAL. G-code arguments may change.
|
||||
*
|
||||
*/
|
||||
//#define NOZZLE_CLEAN_FEATURE
|
||||
#define NOZZLE_CLEAN_FEATURE
|
||||
|
||||
#if ENABLED(NOZZLE_CLEAN_FEATURE)
|
||||
// Default number of pattern repetitions
|
||||
@ -1178,7 +1183,7 @@
|
||||
*
|
||||
* View the current statistics with M78.
|
||||
*/
|
||||
//#define PRINTCOUNTER
|
||||
#define PRINTCOUNTER
|
||||
|
||||
//=============================================================================
|
||||
//============================= LCD and SD support ============================
|
||||
@ -1260,7 +1265,7 @@
|
||||
*
|
||||
* Use CRC checks and retries on the SD communication.
|
||||
*/
|
||||
//#define SD_CHECK_AND_RETRY
|
||||
#define SD_CHECK_AND_RETRY
|
||||
|
||||
//
|
||||
// ENCODER SETTINGS
|
||||
|
||||
@ -119,7 +119,7 @@
|
||||
// The following define selects which electronics board you have.
|
||||
// Please choose the name from boards.h that matches your setup
|
||||
#ifndef MOTHERBOARD
|
||||
#define MOTHERBOARD BOARD_RAMPS_14_EFB
|
||||
#define MOTHERBOARD BOARD_MAKEBOARD_MINI
|
||||
#endif
|
||||
|
||||
// Optional custom name for your RepStrap or other custom machine
|
||||
@ -474,17 +474,17 @@
|
||||
//#define USE_ZMAX_PLUG
|
||||
|
||||
// coarse Endstop Settings
|
||||
//#define ENDSTOPPULLUPS // Comment this out (using // at the start of the line) to disable the endstop pullup resistors
|
||||
#define ENDSTOPPULLUPS // Comment this out (using // at the start of the line) to disable the endstop pullup resistors
|
||||
|
||||
#if DISABLED(ENDSTOPPULLUPS)
|
||||
// fine endstop settings: Individual pullups. will be ignored if ENDSTOPPULLUPS is defined
|
||||
//#define ENDSTOPPULLUP_XMAX
|
||||
//#define ENDSTOPPULLUP_YMAX
|
||||
//#define ENDSTOPPULLUP_ZMAX
|
||||
#define ENDSTOPPULLUP_XMIN
|
||||
#define ENDSTOPPULLUP_YMIN
|
||||
#define ENDSTOPPULLUP_ZMIN
|
||||
#define ENDSTOPPULLUP_ZMIN_PROBE
|
||||
//#define ENDSTOPPULLUP_XMIN
|
||||
//#define ENDSTOPPULLUP_YMIN
|
||||
//#define ENDSTOPPULLUP_ZMIN
|
||||
//#define ENDSTOPPULLUP_ZMIN_PROBE
|
||||
#endif
|
||||
|
||||
// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup).
|
||||
@ -498,7 +498,7 @@
|
||||
|
||||
// Enable this feature if all enabled endstop pins are interrupt-capable.
|
||||
// This will remove the need to poll the interrupt pins, saving many CPU cycles.
|
||||
#define ENDSTOP_INTERRUPTS_FEATURE
|
||||
//#define ENDSTOP_INTERRUPTS_FEATURE
|
||||
|
||||
//=============================================================================
|
||||
//============================== Movement Settings ============================
|
||||
@ -525,14 +525,18 @@
|
||||
* Override with M92
|
||||
* X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
|
||||
*/
|
||||
#define DEFAULT_AXIS_STEPS_PER_UNIT {800,800,800,1200} // MicroMake 128 Steps
|
||||
// choose your micro step per step configuration ( 16 factory settings )
|
||||
//#define DEFAULT_AXIS_STEPS_PER_UNIT { 100, 100, 100, 150 } // 16 steps per unit for Micromake C1 - Factory Settings - ( MS1 : closed ; MS2 : closed on MAKEBOARD Mini)
|
||||
//#define DEFAULT_AXIS_STEPS_PER_UNIT { 200, 200, 200, 300 } // 32 steps per unit for Micromake C1 - Custom Settings - ( MS1 : closed ; MS2 : open on MAKEBOARD Mini)
|
||||
//#define DEFAULT_AXIS_STEPS_PER_UNIT { 400, 400, 400, 600 } // 64 steps per unit for Micromake C1 - Custom Settings - ( MS1 : open ; MS2 : closed on MAKEBOARD Mini)
|
||||
#define DEFAULT_AXIS_STEPS_PER_UNIT { 800, 800, 800, 1200 } // 128 steps per unit for Micromake C1 - Custom Settings - ( MS1 : open ; MS2 : open on MAKEBOARD Mini)
|
||||
|
||||
/**
|
||||
* Default Max Feed Rate (mm/s)
|
||||
* Override with M203
|
||||
* X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
|
||||
*/
|
||||
#define DEFAULT_MAX_FEEDRATE {200, 200, 200, 30} // MicroMake 128 Steps
|
||||
#define DEFAULT_MAX_FEEDRATE { 200, 200, 200, 30 }
|
||||
|
||||
/**
|
||||
* Default Max Acceleration (change/s) change = mm/s
|
||||
@ -540,7 +544,7 @@
|
||||
* Override with M201
|
||||
* X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
|
||||
*/
|
||||
#define DEFAULT_MAX_ACCELERATION {3000,3000,3000,4000} // MicroMake 128 Steps
|
||||
#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 3000, 4000 }
|
||||
|
||||
/**
|
||||
* Default Acceleration (change/s) change = mm/s
|
||||
@ -550,9 +554,9 @@
|
||||
* M204 R Retract Acceleration
|
||||
* M204 T Travel Acceleration
|
||||
*/
|
||||
#define DEFAULT_ACCELERATION 1000 // X, Y, Z and E acceleration for printing moves
|
||||
#define DEFAULT_RETRACT_ACCELERATION 1000 // E acceleration for retracts
|
||||
#define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves
|
||||
#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves
|
||||
#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts
|
||||
#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves
|
||||
|
||||
/**
|
||||
* Default Jerk (mm/s)
|
||||
@ -562,10 +566,10 @@
|
||||
* When changing speed and direction, if the difference is less than the
|
||||
* value set here, it may happen instantaneously.
|
||||
*/
|
||||
#define DEFAULT_XJERK 20.0 // (mm/sec)
|
||||
#define DEFAULT_YJERK 20.0 // (mm/sec)
|
||||
#define DEFAULT_ZJERK 20.0 // (mm/sec)
|
||||
#define DEFAULT_EJERK 5.0 // (mm/sec)
|
||||
#define DEFAULT_XJERK 20.0
|
||||
#define DEFAULT_YJERK 20.0
|
||||
#define DEFAULT_ZJERK 0.4
|
||||
#define DEFAULT_EJERK 5.0
|
||||
|
||||
//===========================================================================
|
||||
//============================= Z Probe Options =============================
|
||||
@ -679,8 +683,8 @@
|
||||
* O-- FRONT --+
|
||||
* (0,0)
|
||||
*/
|
||||
#define X_PROBE_OFFSET_FROM_EXTRUDER -50 // X offset: -left +right [of the nozzle]
|
||||
#define Y_PROBE_OFFSET_FROM_EXTRUDER -20 // Y offset: -front +behind [the nozzle]
|
||||
#define X_PROBE_OFFSET_FROM_EXTRUDER 0 // X offset: -left +right [of the nozzle]
|
||||
#define Y_PROBE_OFFSET_FROM_EXTRUDER 0 // Y offset: -front +behind [the nozzle]
|
||||
#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle]
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
@ -693,7 +697,7 @@
|
||||
#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
|
||||
|
||||
// Use double touch for probing
|
||||
//#define PROBE_DOUBLE_TOUCH
|
||||
#define PROBE_DOUBLE_TOUCH
|
||||
|
||||
/**
|
||||
* Z probes require clearance when deploying, stowing, and moving between
|
||||
@ -774,15 +778,16 @@
|
||||
// @section machine
|
||||
|
||||
// The size of the print bed
|
||||
#define X_BED_SIZE 245
|
||||
#define Y_BED_SIZE 245
|
||||
#define X_BED_SIZE 240
|
||||
#define Y_BED_SIZE 240
|
||||
|
||||
// Travel limits (mm) after homing, corresponding to endstop positions.
|
||||
#define X_MIN_POS 0
|
||||
#define Y_MIN_POS 0
|
||||
#define Z_MIN_POS 0
|
||||
#define X_MAX_POS X_BED_SIZE
|
||||
#define Y_MAX_POS Y_BED_SIZE
|
||||
#define Z_MAX_POS 263
|
||||
#define Z_MAX_POS 260
|
||||
|
||||
/**
|
||||
* Software Endstops
|
||||
@ -890,9 +895,9 @@
|
||||
|
||||
// Set the boundaries for probing (where the probe can reach).
|
||||
#define LEFT_PROBE_BED_POSITION 15
|
||||
#define RIGHT_PROBE_BED_POSITION 140
|
||||
#define RIGHT_PROBE_BED_POSITION 170
|
||||
#define FRONT_PROBE_BED_POSITION 20
|
||||
#define BACK_PROBE_BED_POSITION 200
|
||||
#define BACK_PROBE_BED_POSITION 170
|
||||
|
||||
// The Z probe minimum outer margin (to validate G29 parameters).
|
||||
#define MIN_PROBE_EDGE 10
|
||||
@ -923,10 +928,10 @@
|
||||
// 3 arbitrary points to probe.
|
||||
// A simple cross-product is used to estimate the plane of the bed.
|
||||
#define ABL_PROBE_PT_1_X 15
|
||||
#define ABL_PROBE_PT_1_Y 140
|
||||
#define ABL_PROBE_PT_1_Y 180
|
||||
#define ABL_PROBE_PT_2_X 15
|
||||
#define ABL_PROBE_PT_2_Y 20
|
||||
#define ABL_PROBE_PT_3_X 200
|
||||
#define ABL_PROBE_PT_3_X 170
|
||||
#define ABL_PROBE_PT_3_Y 20
|
||||
|
||||
#elif ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
@ -1029,7 +1034,7 @@
|
||||
// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
|
||||
// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to.
|
||||
//
|
||||
//#define EEPROM_SETTINGS // Enable for M500 and M501 commands
|
||||
#define EEPROM_SETTINGS // Enable for M500 and M501 commands
|
||||
//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release!
|
||||
#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM.
|
||||
|
||||
@ -1051,12 +1056,12 @@
|
||||
//
|
||||
// G20/G21 Inch mode support
|
||||
//
|
||||
//#define INCH_MODE_SUPPORT
|
||||
#define INCH_MODE_SUPPORT
|
||||
|
||||
//
|
||||
// M149 Set temperature units support
|
||||
//
|
||||
//#define TEMPERATURE_UNITS_SUPPORT
|
||||
#define TEMPERATURE_UNITS_SUPPORT
|
||||
|
||||
// @section temperature
|
||||
|
||||
@ -1080,7 +1085,7 @@
|
||||
* P1 Raise the nozzle always to Z-park height.
|
||||
* P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS.
|
||||
*/
|
||||
//#define NOZZLE_PARK_FEATURE
|
||||
#define NOZZLE_PARK_FEATURE
|
||||
|
||||
#if ENABLED(NOZZLE_PARK_FEATURE)
|
||||
// Specify a park position as { X, Y, Z }
|
||||
@ -1125,7 +1130,7 @@
|
||||
* Attention: EXPERIMENTAL. G-code arguments may change.
|
||||
*
|
||||
*/
|
||||
//#define NOZZLE_CLEAN_FEATURE
|
||||
#define NOZZLE_CLEAN_FEATURE
|
||||
|
||||
#if ENABLED(NOZZLE_CLEAN_FEATURE)
|
||||
// Default number of pattern repetitions
|
||||
@ -1178,7 +1183,7 @@
|
||||
*
|
||||
* View the current statistics with M78.
|
||||
*/
|
||||
//#define PRINTCOUNTER
|
||||
#define PRINTCOUNTER
|
||||
|
||||
//=============================================================================
|
||||
//============================= LCD and SD support ============================
|
||||
@ -1260,7 +1265,7 @@
|
||||
*
|
||||
* Use CRC checks and retries on the SD communication.
|
||||
*/
|
||||
//#define SD_CHECK_AND_RETRY
|
||||
#define SD_CHECK_AND_RETRY
|
||||
|
||||
//
|
||||
// ENCODER SETTINGS
|
||||
@ -1314,7 +1319,7 @@
|
||||
// If you have a speaker that can produce tones, enable it here.
|
||||
// By default Marlin assumes you have a buzzer with a fixed frequency.
|
||||
//
|
||||
//#define SPEAKER
|
||||
#define SPEAKER
|
||||
|
||||
//
|
||||
// The duration and frequency for the UI feedback sound.
|
||||
@ -1323,8 +1328,8 @@
|
||||
// Note: Test audio output with the G-Code:
|
||||
// M300 S<frequency Hz> P<duration ms>
|
||||
//
|
||||
//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 100
|
||||
//#define LCD_FEEDBACK_FREQUENCY_HZ 1000
|
||||
#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 100
|
||||
#define LCD_FEEDBACK_FREQUENCY_HZ 1000
|
||||
|
||||
//
|
||||
// CONTROLLER TYPE: Standard
|
||||
|
||||
1445
Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h
Normal file
1445
Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h
Normal file
File diff suppressed because it is too large
Load Diff
@ -101,6 +101,7 @@
|
||||
#define BOARD_BAM_DICE_DUE 402 // 2PrintBeta BAM&DICE Due with STK drivers
|
||||
#define BOARD_BQ_ZUM_MEGA_3D 503 // bq ZUM Mega 3D
|
||||
#define BOARD_ZRIB_V20 504 // zrib V2.0 control board (Chinese knock off RAMPS replica)
|
||||
#define BOARD_MAKEBOARD_MINI 431 // MakeBoard Mini v2.1.2 is a control board sold by MicroMake
|
||||
//ARM 32
|
||||
#define BOARD_DUE3DOM 1411 // DUE3DOM for Arduino DUE
|
||||
#define BOARD_DUE3DOM_MINI 1412 // DUE3DOM MINI for Arduino DUE
|
||||
|
||||
@ -118,6 +118,8 @@
|
||||
#include "pins_RUMBA.h" // ATmega2560
|
||||
#elif MB(BQ_ZUM_MEGA_3D)
|
||||
#include "pins_BQ_ZUM_MEGA_3D.h" // ATmega2560
|
||||
#elif MB(MAKEBOARD_MINI)
|
||||
#include "pins_MAKEBOARD_MINI.h" // ATmega2560
|
||||
|
||||
//
|
||||
// Other ATmega1280, ATmega2560
|
||||
|
||||
Loading…
Reference in New Issue
Block a user