Improve M600 with timeout, wait for heatup.

This commit is contained in:
Roxy-3D 2017-01-21 16:10:57 -07:00 committed by Scott Lahteine
parent 58b8e0cae7
commit 8bf0b496b9
11 changed files with 212 additions and 18 deletions

View File

@ -721,12 +721,16 @@
#define FILAMENT_CHANGE_LOAD_LENGTH 0 // Load filament length over hotend in mm #define FILAMENT_CHANGE_LOAD_LENGTH 0 // Load filament length over hotend in mm
// Longer length for bowden printers to fast load filament into whole bowden tube over the hotend, // Longer length for bowden printers to fast load filament into whole bowden tube over the hotend,
// Short or zero length for printers without bowden where loading is not used // Short or zero length for printers without bowden where loading is not used
#define FILAMENT_CHANGE_LOAD_FEEDRATE 10 // Load filament feedrate in mm/s - filament loading into the bowden tube can be fast #define FILAMENT_CHANGE_LOAD_FEEDRATE 6 // Load filament feedrate in mm/s - filament loading into the bowden tube can be fast
#define FILAMENT_CHANGE_EXTRUDE_LENGTH 50 // Extrude filament length in mm after filament is load over the hotend, #define FILAMENT_CHANGE_EXTRUDE_LENGTH 50 // Extrude filament length in mm after filament is load over the hotend,
// 0 to disable for manual extrusion // 0 to disable for manual extrusion
// Filament can be extruded repeatedly from the filament exchange menu to fill the hotend, // Filament can be extruded repeatedly from the filament exchange menu to fill the hotend,
// or until outcoming filament color is not clear for filament color change // or until outcoming filament color is not clear for filament color change
#define FILAMENT_CHANGE_EXTRUDE_FEEDRATE 3 // Extrude filament feedrate in mm/s - must be slower than load feedrate #define FILAMENT_CHANGE_EXTRUDE_FEEDRATE 3 // Extrude filament feedrate in mm/s - must be slower than load feedrate
#define FILAMENT_CHANGE_NOZZLE_TIMEOUT 45L // Turn off nozzle if user doesn't change filament within this time limit in seconds
#define FILAMENT_CHANGE_NUMBER_OF_ALERT_BEEPS 5L // Number of alert beeps before printer goes quiet
#define STEPPER_MOTORS_DONT_TIMEOUT_DURING_FILAMENT_CHANGE // Enable to make stepper motors hold position during filament change even if it
// takes longer than DEFAULT_STEPPER_DEACTIVE_TIME
#endif #endif
/******************************************************************************\ /******************************************************************************\

View File

@ -7290,6 +7290,28 @@ inline void gcode_M503() {
#if ENABLED(FILAMENT_CHANGE_FEATURE) #if ENABLED(FILAMENT_CHANGE_FEATURE)
millis_t next_buzz = 0;
unsigned long int runout_beep = 0;
void filament_change_beep() {
millis_t ms = millis();
if (ms >= next_buzz) {
if (runout_beep <= FILAMENT_CHANGE_NUMBER_OF_ALERT_BEEPS ) { // Only beep as long as we are supposed to!
BUZZ(300, 2000);
next_buzz = ms + 2500; // Beep every 2.5s while waiting
runout_beep++;
}
else if (runout_beep > FILAMENT_CHANGE_NUMBER_OF_ALERT_BEEPS &&
runout_beep <= (FILAMENT_CHANGE_NUMBER_OF_ALERT_BEEPS + 5)) { // End with a burst of short beeps
BUZZ(200, 2000);
next_buzz = ms + 400; // Beep
runout_beep++;
}
}
}
bool busy_doing_M600 = false;
/** /**
* M600: Pause for filament change * M600: Pause for filament change
* *
@ -7310,6 +7332,8 @@ inline void gcode_M503() {
return; return;
} }
busy_doing_M600 = true; // Stepper Motors can't timeout when this is set
// Show initial message and wait for synchronize steppers // Show initial message and wait for synchronize steppers
lcd_filament_change_show_message(FILAMENT_CHANGE_MESSAGE_INIT); lcd_filament_change_show_message(FILAMENT_CHANGE_MESSAGE_INIT);
stepper.synchronize(); stepper.synchronize();
@ -7367,6 +7391,7 @@ inline void gcode_M503() {
stepper.synchronize(); stepper.synchronize();
lcd_filament_change_show_message(FILAMENT_CHANGE_MESSAGE_UNLOAD); lcd_filament_change_show_message(FILAMENT_CHANGE_MESSAGE_UNLOAD);
idle();
// Unload filament // Unload filament
if (code_seen('L')) destination[E_AXIS] += code_value_axis_units(E_AXIS); if (code_seen('L')) destination[E_AXIS] += code_value_axis_units(E_AXIS);
@ -7384,23 +7409,66 @@ inline void gcode_M503() {
disable_e3(); disable_e3();
delay(100); delay(100);
#if HAS_BUZZER millis_t nozzle_timeout = millis() + FILAMENT_CHANGE_NOZZLE_TIMEOUT*1000L;
millis_t next_buzz = 0; bool nozzle_timed_out = false;
#endif float temps[4];
int iii;
// Wait for filament insert by user and press button // Wait for filament insert by user and press button
lcd_filament_change_show_message(FILAMENT_CHANGE_MESSAGE_INSERT); lcd_filament_change_show_message(FILAMENT_CHANGE_MESSAGE_INSERT);
// LCD click or M108 will clear this idle();
wait_for_user = true;
wait_for_user = true; // LCD click or M108 will clear this
next_buzz = 0;
runout_beep = 0;
for( iii=0; iii<HOTENDS; iii++) //Save nozzle temps
temps[iii] = thermalManager.target_temperature[iii];
while (wait_for_user) { while (wait_for_user) {
millis_t current_ms = millis();
if (nozzle_timed_out == true)
lcd_filament_change_show_message(FILAMENT_CHANGE_MESSAGE_CLICK_TO_HEAT_NOZZLE);
#if HAS_BUZZER #if HAS_BUZZER
millis_t ms = millis(); filament_change_beep();
if (ms >= next_buzz) { #endif //HAS_BUZZER
BUZZ(300, 2000);
next_buzz = ms + 2500; // Beep every 2.5s while waiting if (current_ms >= nozzle_timeout) {
if (nozzle_timed_out == false ) {
nozzle_timed_out = true; // if the nozzle time out happens, remember we turned off the nozzles.
for( iii=0; iii<HOTENDS; iii++) // turn off all the nozzles
thermalManager.setTargetHotend( 0.0 , iii );
lcd_filament_change_show_message(FILAMENT_CHANGE_MESSAGE_CLICK_TO_HEAT_NOZZLE);
} }
}
idle(true);
}
if (nozzle_timed_out == true ) { // Turn nozzles back on if we turned them off.
for( iii=0; iii<HOTENDS; iii++)
thermalManager.setTargetHotend( temps[iii] , iii );
lcd_filament_change_show_message(FILAMENT_CHANGE_MESSAGE_WAIT_FOR_NOZZLES_TO_HEAT);
}
KEEP_CHECKING_TEMPS:
idle();
for( iii=0; iii<HOTENDS; iii++){
if (abs(thermalManager.degHotend(iii)-temps[iii]) > 3 ) {
lcd_filament_change_show_message(FILAMENT_CHANGE_MESSAGE_WAIT_FOR_NOZZLES_TO_HEAT);
goto KEEP_CHECKING_TEMPS;
}
}
wait_for_user = true; // LCD click or M108 will clear this
next_buzz = 0;
runout_beep = 0;
while (wait_for_user) {
if (nozzle_timed_out == true)
lcd_filament_change_show_message(FILAMENT_CHANGE_MESSAGE_INSERT);
else break;
#if HAS_BUZZER
filament_change_beep();
#endif #endif
idle(true); idle(true);
} }
@ -7408,6 +7476,8 @@ inline void gcode_M503() {
// Show load message // Show load message
lcd_filament_change_show_message(FILAMENT_CHANGE_MESSAGE_LOAD); lcd_filament_change_show_message(FILAMENT_CHANGE_MESSAGE_LOAD);
idle();
// Load filament // Load filament
if (code_seen('L')) destination[E_AXIS] -= code_value_axis_units(E_AXIS); if (code_seen('L')) destination[E_AXIS] -= code_value_axis_units(E_AXIS);
#if defined(FILAMENT_CHANGE_LOAD_LENGTH) && FILAMENT_CHANGE_LOAD_LENGTH > 0 #if defined(FILAMENT_CHANGE_LOAD_LENGTH) && FILAMENT_CHANGE_LOAD_LENGTH > 0
@ -7459,6 +7529,7 @@ inline void gcode_M503() {
// Show status screen // Show status screen
lcd_filament_change_show_message(FILAMENT_CHANGE_MESSAGE_STATUS); lcd_filament_change_show_message(FILAMENT_CHANGE_MESSAGE_STATUS);
busy_doing_M600 = false; // Allow Stepper Motors to be turned off during inactivity
} }
#endif // FILAMENT_CHANGE_FEATURE #endif // FILAMENT_CHANGE_FEATURE
@ -10074,6 +10145,12 @@ void manage_inactivity(bool ignore_stepper_queue/*=false*/) {
if (max_inactive_time && ELAPSED(ms, previous_cmd_ms + max_inactive_time)) kill(PSTR(MSG_KILLED)); if (max_inactive_time && ELAPSED(ms, previous_cmd_ms + max_inactive_time)) kill(PSTR(MSG_KILLED));
#if ENABLED(FILAMENT_CHANGE_FEATURE)
#ifdef STEPPER_MOTORS_DONT_TIMEOUT_DURING_FILAMENT_CHANGE
if (busy_doing_M600 == false ) // We only allow the stepper motors to time out if
#endif // we are not in the middle of an M600 command.
#endif
if (stepper_inactive_time && ELAPSED(ms, previous_cmd_ms + stepper_inactive_time) if (stepper_inactive_time && ELAPSED(ms, previous_cmd_ms + stepper_inactive_time)
&& !ignore_stepper_queue && !planner.blocks_queued()) { && !ignore_stepper_queue && !planner.blocks_queued()) {
#if ENABLED(DISABLE_INACTIVE_X) #if ENABLED(DISABLE_INACTIVE_X)

View File

@ -31,7 +31,7 @@
X Font ascent = 7 descent=-1 X Font ascent = 7 descent=-1
Max Font ascent = 8 descent=-1 Max Font ascent = 8 descent=-1
*/ */
#include "U8glib.h" #include <U8glib.h>
const u8g_fntpgm_uint8_t ISO10646_TR[2591] U8G_SECTION(".progmem.ISO10646_TR") = { const u8g_fntpgm_uint8_t ISO10646_TR[2591] U8G_SECTION(".progmem.ISO10646_TR") = {
0,6,9,0,254,7,1,146,3,33,32,255,255,8,255,7, 0,6,9,0,254,7,1,146,3,33,32,255,255,8,255,7,
255,0,0,0,6,0,0,1,7,7,6,2,0,128,128,128, 255,0,0,0,6,0,0,1,7,7,6,2,0,128,128,128,

View File

@ -217,6 +217,10 @@ void Endstops::M119() {
SERIAL_PROTOCOLPGM(MSG_Z_PROBE); SERIAL_PROTOCOLPGM(MSG_Z_PROBE);
SERIAL_PROTOCOLLN(((READ(Z_MIN_PROBE_PIN)^Z_MIN_PROBE_ENDSTOP_INVERTING) ? MSG_ENDSTOP_HIT : MSG_ENDSTOP_OPEN)); SERIAL_PROTOCOLLN(((READ(Z_MIN_PROBE_PIN)^Z_MIN_PROBE_ENDSTOP_INVERTING) ? MSG_ENDSTOP_HIT : MSG_ENDSTOP_OPEN));
#endif #endif
#if ENABLED(FILAMENT_RUNOUT_SENSOR)
SERIAL_PROTOCOLPGM(MSG_FILAMENT_RUNOUT_SENSOR);
SERIAL_PROTOCOLLN(((READ(FIL_RUNOUT_PIN)^FIL_RUNOUT_INVERTING) ? MSG_ENDSTOP_HIT : MSG_ENDSTOP_OPEN));
#endif
} // Endstops::M119 } // Endstops::M119
#if ENABLED(Z_DUAL_ENDSTOPS) #if ENABLED(Z_DUAL_ENDSTOPS)

View File

@ -143,7 +143,9 @@ enum TempState {
FILAMENT_CHANGE_MESSAGE_EXTRUDE, FILAMENT_CHANGE_MESSAGE_EXTRUDE,
FILAMENT_CHANGE_MESSAGE_OPTION, FILAMENT_CHANGE_MESSAGE_OPTION,
FILAMENT_CHANGE_MESSAGE_RESUME, FILAMENT_CHANGE_MESSAGE_RESUME,
FILAMENT_CHANGE_MESSAGE_STATUS FILAMENT_CHANGE_MESSAGE_STATUS,
FILAMENT_CHANGE_MESSAGE_CLICK_TO_HEAT_NOZZLE,
FILAMENT_CHANGE_MESSAGE_WAIT_FOR_NOZZLES_TO_HEAT
}; };
#endif #endif
#endif #endif

View File

@ -152,6 +152,7 @@
#define MSG_Z2_MIN "z2_min: " #define MSG_Z2_MIN "z2_min: "
#define MSG_Z2_MAX "z2_max: " #define MSG_Z2_MAX "z2_max: "
#define MSG_Z_PROBE "z_probe: " #define MSG_Z_PROBE "z_probe: "
#define MSG_FILAMENT_RUNOUT_SENSOR "filament_Runout_Sensor: "
#define MSG_ERR_MATERIAL_INDEX "M145 S<index> out of range (0-1)" #define MSG_ERR_MATERIAL_INDEX "M145 S<index> out of range (0-1)"
#define MSG_ERR_M355_NONE "No case light" #define MSG_ERR_M355_NONE "No case light"
#define MSG_ERR_M421_PARAMETERS "M421 required parameters missing" #define MSG_ERR_M421_PARAMETERS "M421 required parameters missing"

View File

@ -33,6 +33,9 @@
#ifndef WELCOME_MSG #ifndef WELCOME_MSG
#define WELCOME_MSG MACHINE_NAME _UxGT(" ready.") #define WELCOME_MSG MACHINE_NAME _UxGT(" ready.")
#endif #endif
#ifndef MSG_BACK
#define MSG_BACK _UxGT("Back")
#endif
#ifndef MSG_SD_INSERTED #ifndef MSG_SD_INSERTED
#define MSG_SD_INSERTED _UxGT("Card inserted") #define MSG_SD_INSERTED _UxGT("Card inserted")
#endif #endif
@ -486,7 +489,6 @@
#ifndef MSG_DELTA_CALIBRATE_CENTER #ifndef MSG_DELTA_CALIBRATE_CENTER
#define MSG_DELTA_CALIBRATE_CENTER _UxGT("Calibrate Center") #define MSG_DELTA_CALIBRATE_CENTER _UxGT("Calibrate Center")
#endif #endif
#ifndef MSG_INFO_MENU #ifndef MSG_INFO_MENU
#define MSG_INFO_MENU _UxGT("About Printer") #define MSG_INFO_MENU _UxGT("About Printer")
#endif #endif
@ -583,6 +585,12 @@
#ifndef MSG_FILAMENT_CHANGE_OPTION_RESUME #ifndef MSG_FILAMENT_CHANGE_OPTION_RESUME
#define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("Resume print") #define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("Resume print")
#endif #endif
#ifndef MSG_FILAMENT_CHANGE_MINTEMP
#define MSG_FILAMENT_CHANGE_MINTEMP _UxGT("Minimum Temp is ")
#endif
#ifndef MSG_FILAMENT_CHANGE_NOZZLE
#define MSG_FILAMENT_CHANGE_NOZZLE _UxGT(" Nozzle: ")
#endif
// //
// Filament Change screens show up to 3 lines on a 4-line display // Filament Change screens show up to 3 lines on a 4-line display
@ -603,6 +611,14 @@
#define MSG_FILAMENT_CHANGE_INSERT_2 _UxGT("and press button") #define MSG_FILAMENT_CHANGE_INSERT_2 _UxGT("and press button")
#define MSG_FILAMENT_CHANGE_INSERT_3 _UxGT("to continue...") #define MSG_FILAMENT_CHANGE_INSERT_3 _UxGT("to continue...")
#endif #endif
#ifndef MSG_FILAMENT_CHANGE_HEAT_1
#define MSG_FILAMENT_CHANGE_HEAT_1 _UxGT("Press button to")
#define MSG_FILAMENT_CHANGE_HEAT_2 _UxGT("heat nozzle.")
#endif
#ifndef MSG_FILAMENT_CHANGE_HEATING_1
#define MSG_FILAMENT_CHANGE_HEATING_1 _UxGT("Heating nozzle")
#define MSG_FILAMENT_CHANGE_HEATING_2 _UxGT("Please wait...")
#endif
#ifndef MSG_FILAMENT_CHANGE_LOAD_1 #ifndef MSG_FILAMENT_CHANGE_LOAD_1
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Wait for") #define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Wait for")
#define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("filament load") #define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("filament load")
@ -625,6 +641,9 @@
#ifndef MSG_FILAMENT_CHANGE_INSERT_1 #ifndef MSG_FILAMENT_CHANGE_INSERT_1
#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Insert and Click") #define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Insert and Click")
#endif #endif
#ifndef MSG_FILAMENT_CHANGE_HEATING_1
#define MSG_FILAMENT_CHANGE_HEATING_1 _UxGT("Heating...")
#endif
#ifndef MSG_FILAMENT_CHANGE_LOAD_1 #ifndef MSG_FILAMENT_CHANGE_LOAD_1
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Loading...") #define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Loading...")
#endif #endif

View File

@ -54,6 +54,7 @@ char lcd_status_message[3 * (LCD_WIDTH) + 1] = WELCOME_MSG; // worst case is kan
#if ENABLED(DOGLCD) #if ENABLED(DOGLCD)
#include "ultralcd_impl_DOGM.h" #include "ultralcd_impl_DOGM.h"
#include <U8glib.h>
#else #else
#include "ultralcd_impl_HD44780.h" #include "ultralcd_impl_HD44780.h"
#endif #endif
@ -151,6 +152,7 @@ uint16_t max_display_update_time = 0;
void lcd_filament_change_unload_message(); void lcd_filament_change_unload_message();
void lcd_filament_change_insert_message(); void lcd_filament_change_insert_message();
void lcd_filament_change_load_message(); void lcd_filament_change_load_message();
void lcd_filament_change_heat_nozzle();
void lcd_filament_change_extrude_message(); void lcd_filament_change_extrude_message();
void lcd_filament_change_resume_message(); void lcd_filament_change_resume_message();
#endif #endif
@ -948,6 +950,7 @@ void kill_screen(const char* lcd_msg) {
// Change filament // Change filament
// //
#if ENABLED(FILAMENT_CHANGE_FEATURE) #if ENABLED(FILAMENT_CHANGE_FEATURE)
if (!thermalManager.tooColdToExtrude(active_extruder))
MENU_ITEM(function, MSG_FILAMENTCHANGE, lcd_enqueue_filament_change); MENU_ITEM(function, MSG_FILAMENTCHANGE, lcd_enqueue_filament_change);
#endif #endif
@ -1384,10 +1387,12 @@ KeepDrawing:
MENU_ITEM(function, MSG_PREHEAT_1, lcd_preheat_material1_hotend0); MENU_ITEM(function, MSG_PREHEAT_1, lcd_preheat_material1_hotend0);
MENU_ITEM(function, MSG_PREHEAT_2, lcd_preheat_material2_hotend0); MENU_ITEM(function, MSG_PREHEAT_2, lcd_preheat_material2_hotend0);
#endif #endif
// //
// Change filament // Change filament
// //
#if ENABLED(FILAMENT_CHANGE_FEATURE) #if ENABLED(FILAMENT_CHANGE_FEATURE)
if (!thermalManager.tooColdToExtrude(active_extruder))
MENU_ITEM(function, MSG_FILAMENTCHANGE, lcd_enqueue_filament_change); MENU_ITEM(function, MSG_FILAMENTCHANGE, lcd_enqueue_filament_change);
#endif #endif
#endif #endif
@ -2441,11 +2446,21 @@ KeepDrawing:
} }
#endif // LCD_INFO_MENU #endif // LCD_INFO_MENU
/**
*
* Filament Change Feature Screens
*
*/
#if ENABLED(FILAMENT_CHANGE_FEATURE) #if ENABLED(FILAMENT_CHANGE_FEATURE)
void lcd_filament_change_toocold_menu() { void lcd_filament_change_toocold_menu() {
START_MENU(); START_MENU();
STATIC_ITEM(MSG_HEATING_FAILED_LCD, true, true); STATIC_ITEM(MSG_HEATING_FAILED_LCD, true, true);
MENU_BACK(MSG_FILAMENTCHANGE); STATIC_ITEM (MSG_FILAMENT_CHANGE_MINTEMP STRINGIFY(EXTRUDE_MINTEMP) ".", false, false);
MENU_BACK(MSG_BACK);
STATIC_ITEM (" ");
STATIC_ITEM(MSG_FILAMENT_CHANGE_NOZZLE, false, true);
lcd_implementation_hotend_status();
END_MENU(); END_MENU();
} }
@ -2478,6 +2493,8 @@ KeepDrawing:
#ifdef MSG_FILAMENT_CHANGE_INIT_3 #ifdef MSG_FILAMENT_CHANGE_INIT_3
STATIC_ITEM(MSG_FILAMENT_CHANGE_INIT_3); STATIC_ITEM(MSG_FILAMENT_CHANGE_INIT_3);
#endif #endif
STATIC_ITEM(MSG_FILAMENT_CHANGE_NOZZLE, false, true);
lcd_implementation_hotend_status();
END_SCREEN(); END_SCREEN();
} }
@ -2491,6 +2508,35 @@ KeepDrawing:
#ifdef MSG_FILAMENT_CHANGE_UNLOAD_3 #ifdef MSG_FILAMENT_CHANGE_UNLOAD_3
STATIC_ITEM(MSG_FILAMENT_CHANGE_UNLOAD_3); STATIC_ITEM(MSG_FILAMENT_CHANGE_UNLOAD_3);
#endif #endif
STATIC_ITEM (" ");
STATIC_ITEM(MSG_FILAMENT_CHANGE_NOZZLE, false, true);
lcd_implementation_hotend_status();
END_SCREEN();
}
void lcd_filament_change_wait_for_nozzles_to_heat() {
START_SCREEN();
STATIC_ITEM(MSG_FILAMENT_CHANGE_HEADER, true, true);
STATIC_ITEM(MSG_FILAMENT_CHANGE_HEATING_1);
#ifdef MSG_FILAMENT_CHANGE_HEATING_2
STATIC_ITEM(MSG_FILAMENT_CHANGE_HEATING_2);
#endif
STATIC_ITEM(" ");
STATIC_ITEM(MSG_FILAMENT_CHANGE_NOZZLE, false, true);
lcd_implementation_hotend_status();
END_SCREEN();
}
void lcd_filament_change_heat_nozzle() {
START_SCREEN();
STATIC_ITEM(MSG_FILAMENT_CHANGE_HEADER, true, true);
STATIC_ITEM(MSG_FILAMENT_CHANGE_HEAT_1);
#ifdef MSG_FILAMENT_CHANGE_INSERT_2
STATIC_ITEM(MSG_FILAMENT_CHANGE_HEAT_2);
#endif
STATIC_ITEM(" ");
STATIC_ITEM(MSG_FILAMENT_CHANGE_NOZZLE, false, true);
lcd_implementation_hotend_status();
END_SCREEN(); END_SCREEN();
} }
@ -2504,6 +2550,8 @@ KeepDrawing:
#ifdef MSG_FILAMENT_CHANGE_INSERT_3 #ifdef MSG_FILAMENT_CHANGE_INSERT_3
STATIC_ITEM(MSG_FILAMENT_CHANGE_INSERT_3); STATIC_ITEM(MSG_FILAMENT_CHANGE_INSERT_3);
#endif #endif
STATIC_ITEM(MSG_FILAMENT_CHANGE_NOZZLE, false, true);
lcd_implementation_hotend_status();
END_SCREEN(); END_SCREEN();
} }
@ -2517,6 +2565,9 @@ KeepDrawing:
#ifdef MSG_FILAMENT_CHANGE_LOAD_3 #ifdef MSG_FILAMENT_CHANGE_LOAD_3
STATIC_ITEM(MSG_FILAMENT_CHANGE_LOAD_3); STATIC_ITEM(MSG_FILAMENT_CHANGE_LOAD_3);
#endif #endif
STATIC_ITEM(" ");
STATIC_ITEM(MSG_FILAMENT_CHANGE_NOZZLE, false, true);
lcd_implementation_hotend_status();
END_SCREEN(); END_SCREEN();
} }
@ -2530,6 +2581,9 @@ KeepDrawing:
#ifdef MSG_FILAMENT_CHANGE_EXTRUDE_3 #ifdef MSG_FILAMENT_CHANGE_EXTRUDE_3
STATIC_ITEM(MSG_FILAMENT_CHANGE_EXTRUDE_3); STATIC_ITEM(MSG_FILAMENT_CHANGE_EXTRUDE_3);
#endif #endif
STATIC_ITEM(" ");
STATIC_ITEM(MSG_FILAMENT_CHANGE_NOZZLE, false, true);
lcd_implementation_hotend_status();
END_SCREEN(); END_SCREEN();
} }
@ -2550,20 +2604,33 @@ KeepDrawing:
switch (message) { switch (message) {
case FILAMENT_CHANGE_MESSAGE_INIT: case FILAMENT_CHANGE_MESSAGE_INIT:
defer_return_to_status = true; defer_return_to_status = true;
lcdDrawUpdate = LCDVIEW_CALL_REDRAW_NEXT;
lcd_goto_screen(lcd_filament_change_init_message); lcd_goto_screen(lcd_filament_change_init_message);
break; break;
case FILAMENT_CHANGE_MESSAGE_UNLOAD: case FILAMENT_CHANGE_MESSAGE_UNLOAD:
lcdDrawUpdate = LCDVIEW_CALL_REDRAW_NEXT;
lcd_goto_screen(lcd_filament_change_unload_message); lcd_goto_screen(lcd_filament_change_unload_message);
break; break;
case FILAMENT_CHANGE_MESSAGE_INSERT: case FILAMENT_CHANGE_MESSAGE_INSERT:
lcdDrawUpdate = LCDVIEW_CALL_REDRAW_NEXT;
lcd_goto_screen(lcd_filament_change_insert_message); lcd_goto_screen(lcd_filament_change_insert_message);
break; break;
case FILAMENT_CHANGE_MESSAGE_LOAD: case FILAMENT_CHANGE_MESSAGE_LOAD:
lcdDrawUpdate = LCDVIEW_CALL_REDRAW_NEXT;
lcd_goto_screen(lcd_filament_change_load_message); lcd_goto_screen(lcd_filament_change_load_message);
break; break;
case FILAMENT_CHANGE_MESSAGE_EXTRUDE: case FILAMENT_CHANGE_MESSAGE_EXTRUDE:
lcdDrawUpdate = LCDVIEW_CALL_REDRAW_NEXT;
lcd_goto_screen(lcd_filament_change_extrude_message); lcd_goto_screen(lcd_filament_change_extrude_message);
break; break;
case FILAMENT_CHANGE_MESSAGE_CLICK_TO_HEAT_NOZZLE:
lcdDrawUpdate = LCDVIEW_CALL_REDRAW_NEXT;
lcd_goto_screen(lcd_filament_change_heat_nozzle);
break;
case FILAMENT_CHANGE_MESSAGE_WAIT_FOR_NOZZLES_TO_HEAT:
lcdDrawUpdate = LCDVIEW_CALL_REDRAW_NEXT;
lcd_goto_screen(lcd_filament_change_wait_for_nozzles_to_heat);
break;
case FILAMENT_CHANGE_MESSAGE_OPTION: case FILAMENT_CHANGE_MESSAGE_OPTION:
filament_change_menu_response = FILAMENT_CHANGE_RESPONSE_WAIT_FOR; filament_change_menu_response = FILAMENT_CHANGE_RESPONSE_WAIT_FOR;
lcd_goto_screen(lcd_filament_change_option_menu); lcd_goto_screen(lcd_filament_change_option_menu);

View File

@ -379,6 +379,17 @@ FORCE_INLINE void _draw_axis_label(const AxisEnum axis, const char* const pstr,
//#define DOGM_SD_PERCENT //#define DOGM_SD_PERCENT
static void lcd_implementation_hotend_status() {
u8g.setPrintPos(58, 60);
lcd_print( (char) '0'+active_extruder );
lcd_print( ' ' );
lcd_print( ' ' );
lcd_print(itostr3(thermalManager.degHotend(active_extruder)));
lcd_print('/');
lcd_print(itostr3(thermalManager.degTargetHotend(active_extruder)));
}
static void lcd_implementation_status_screen() { static void lcd_implementation_status_screen() {
bool blink = lcd_blink(); bool blink = lcd_blink();

View File

@ -592,6 +592,14 @@ FORCE_INLINE void _draw_axis_label(const AxisEnum axis, const char* const pstr,
#endif // LCD_PROGRESS_BAR #endif // LCD_PROGRESS_BAR
static void lcd_implementation_hotend_status() {
lcd.setCursor(10,3);
lcd.print(LCD_STR_THERMOMETER[active_extruder]);
lcd.print(itostr3(thermalManager.degHotend(active_extruder)));
lcd.print('/');
lcd.print(itostr3(thermalManager.degTargetHotend(active_extruder)));
}
/** /**
Possible status screens: Possible status screens:
16x2 |000/000 B000/000| 16x2 |000/000 B000/000|

View File

@ -19,6 +19,7 @@ The latest Release Candidate lives in the ["RC" branch](https://github.com/Marli
## Recent Changes ## Recent Changes
- RCBugFix - RCBugFix
- Fixed broken MBL - Fixed broken MBL
- M600 heater timeout option
- RC8 - 06 Dec 2016 - RC8 - 06 Dec 2016
- Major performance improvement for Graphical LCDs - Major performance improvement for Graphical LCDs