Fysetc AIO II / Cheetah STM32F1 (#14407)
This commit is contained in:
Eric Ptak
committed by
Scott Lahteine
Scott Lahteine
parent
8e23e9b16c
commit
8934b32f1b
@ -434,6 +434,10 @@
|
||||
#include "pins_MKS_ROBIN_MINI.h" // STM32F1 env:mks_robin_mini
|
||||
#elif MB(JGAURORA_A5S_A1)
|
||||
#include "pins_JGAURORA_A5S_A1.h" // STM32F1 env:JGAURORA_A5S_A1
|
||||
#elif MB(FYSETC_AIO_II)
|
||||
#include "pins_FYSETC_AIO_II.h" // STM32F1 env:fysetc_STM32F1
|
||||
#elif MB(FYSETC_CHEETAH)
|
||||
#include "pins_FYSETC_CHEETAH.h" // STM32F1 env:fysetc_STM32F1
|
||||
|
||||
//
|
||||
// STM32 ARM Cortex-M4F
|
||||
@ -456,8 +460,6 @@
|
||||
#elif MB(STEVAL)
|
||||
#include "pins_STEVAL.h" // STM32F4 env:STM32F4
|
||||
|
||||
|
||||
|
||||
//
|
||||
// ARM Cortex M7
|
||||
//
|
||||
|
||||
178
Marlin/src/pins/pins_FYSETC_AIO_II.h
Normal file
178
Marlin/src/pins/pins_FYSETC_AIO_II.h
Normal file
@ -0,0 +1,178 @@
|
||||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
|
||||
#ifndef __STM32F1__
|
||||
#error "Oops! Select an STM32F1 board in 'Tools > Board.'"
|
||||
#endif
|
||||
|
||||
#define BOARD_NAME "FYSETC AIO II"
|
||||
#define BOARD_WEBSITE_URL "https://fysetc.com"
|
||||
|
||||
#define pins_v2_20190128 // geo-f:add for new pins define
|
||||
|
||||
// Ignore temp readings during develpment.
|
||||
#define BOGUS_TEMPERATURE_FAILSAFE_OVERRIDE
|
||||
|
||||
//
|
||||
// Limit Switches
|
||||
//
|
||||
#define X_STOP_PIN PA1
|
||||
#define Y_STOP_PIN PA0
|
||||
#define Z_STOP_PIN PB14
|
||||
|
||||
//
|
||||
// Filament runout
|
||||
//
|
||||
#ifdef pins_v2_20190128
|
||||
#define FIL_RUNOUT_PIN PB15
|
||||
#else
|
||||
#define FIL_RUNOUT_PIN PB5
|
||||
#endif
|
||||
|
||||
//
|
||||
// Steppers
|
||||
//
|
||||
#define X_STEP_PIN PB8
|
||||
#define X_DIR_PIN PB9
|
||||
#define X_ENABLE_PIN PA8
|
||||
|
||||
#define Y_STEP_PIN PB2
|
||||
#ifdef pins_v2_20190128
|
||||
#define Y_DIR_PIN PB3
|
||||
#else
|
||||
#define Y_DIR_PIN PB0
|
||||
#endif
|
||||
#define Y_ENABLE_PIN PB1
|
||||
|
||||
#define Z_STEP_PIN PC0
|
||||
#define Z_DIR_PIN PC1
|
||||
#define Z_ENABLE_PIN PC2
|
||||
|
||||
#define E0_STEP_PIN PC15
|
||||
#define E0_DIR_PIN PC14
|
||||
#define E0_ENABLE_PIN PC13
|
||||
|
||||
//
|
||||
// Stepper current PWM
|
||||
//
|
||||
|
||||
// X:PA2 Y:PA3 Z:PB12 E:PB13 // changed for test
|
||||
#define MOTOR_CURRENT_PWM_XY_PIN PA3
|
||||
#define MOTOR_CURRENT_PWM_Z_PIN PA2 // PB12
|
||||
//#define MOTOR_CURRENT_PWM_XY_PIN PB6
|
||||
//#define MOTOR_CURRENT_PWM_Z_PIN PB7 // PB12
|
||||
#define MOTOR_CURRENT_PWM_E_PIN -1 // PB13
|
||||
// Motor current PWM conversion, PWM value = MotorCurrentSetting * 255 / range
|
||||
#ifndef MOTOR_CURRENT_PWM_RANGE
|
||||
#define MOTOR_CURRENT_PWM_RANGE 1500 // geo-f:old 2000
|
||||
#endif
|
||||
#define DEFAULT_PWM_MOTOR_CURRENT {500, 500, 400} // geo-f:old 1300 1300 1250
|
||||
|
||||
// 采用 SDIO PCB从左到右数
|
||||
// 1:PC10 - SDIO_D2
|
||||
// 2:PC11 - SDIO_D3
|
||||
// 3:PD2 - SDIO_CMD
|
||||
// 4:VCC
|
||||
// 5:PC12 - SDIO_CK
|
||||
// 6:VDD
|
||||
// 7:PC8 - SDIO_D0
|
||||
// 8:PC9 - SDIO_D1
|
||||
// 9:PA15 - SD_DETECT_PIN
|
||||
|
||||
//
|
||||
// Heaters / Fans
|
||||
//
|
||||
#define HEATER_0_PIN PC7
|
||||
#define HEATER_BED_PIN PC6
|
||||
#ifndef FAN_PIN
|
||||
#define FAN_PIN PC8
|
||||
#endif
|
||||
|
||||
//
|
||||
// Temperature Sensors
|
||||
//
|
||||
#define TEMP_BED_PIN PC5 // Analog Input
|
||||
#define TEMP_0_PIN PC4 // Analog Input
|
||||
|
||||
//
|
||||
// Misc. Functions
|
||||
//
|
||||
#define SDSS PA4
|
||||
|
||||
//
|
||||
// LCD Pins
|
||||
//
|
||||
#if ENABLED(ULTRA_LCD)
|
||||
|
||||
#define BEEPER_PIN PC9
|
||||
|
||||
#if HAS_GRAPHICAL_LCD
|
||||
|
||||
#define DOGLCD_A0 PA15
|
||||
#ifdef pins_v2_20190128
|
||||
#define DOGLCD_CS PB5
|
||||
#else
|
||||
#define DOGLCD_CS PB7
|
||||
#endif
|
||||
|
||||
//#define LCD_CONTRAST 190
|
||||
//#define LCD_SCREEN_ROT_90
|
||||
//#define LCD_SCREEN_ROT_180
|
||||
//#define LCD_SCREEN_ROT_270
|
||||
|
||||
#endif
|
||||
|
||||
// not connected to a pin
|
||||
#define SD_DETECT_PIN PC3
|
||||
|
||||
#if ENABLED(NEWPANEL)
|
||||
// The encoder and click button
|
||||
#define BTN_EN1 PC10
|
||||
#define BTN_EN2 PC11
|
||||
#define BTN_ENC PC12
|
||||
#endif
|
||||
|
||||
#ifdef pins_v2_20190128
|
||||
#define LCD_RESET_PIN PB4
|
||||
#ifndef RGB_LED_R_PIN
|
||||
#define RGB_LED_R_PIN PB0
|
||||
#endif
|
||||
#ifndef RGB_LED_G_PIN
|
||||
#define RGB_LED_G_PIN PB6
|
||||
#endif
|
||||
#ifndef RGB_LED_B_PIN
|
||||
#define RGB_LED_B_PIN PB7
|
||||
#endif
|
||||
#else
|
||||
#define LCD_RESET_PIN PB6
|
||||
#ifndef RGB_LED_R_PIN
|
||||
#define RGB_LED_R_PIN PB3
|
||||
#endif
|
||||
#ifndef RGB_LED_G_PIN
|
||||
#define RGB_LED_G_PIN PB4
|
||||
#endif
|
||||
#ifndef RGB_LED_B_PIN
|
||||
#define RGB_LED_B_PIN PB5
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#endif
|
||||
142
Marlin/src/pins/pins_FYSETC_CHEETAH.h
Normal file
142
Marlin/src/pins/pins_FYSETC_CHEETAH.h
Normal file
@ -0,0 +1,142 @@
|
||||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
|
||||
#ifndef __STM32F1__
|
||||
#error "Oops! Select an STM32F1 board in 'Tools > Board.'"
|
||||
#endif
|
||||
|
||||
#define DEFAULT_MACHINE_NAME "3D Printer"
|
||||
|
||||
#define BOARD_NAME "FYSETC CHEETAH"
|
||||
#define BOARD_WEBSITE_URL "https://fysetc.com"
|
||||
|
||||
// Ignore temp readings during develpment.
|
||||
#define BOGUS_TEMPERATURE_FAILSAFE_OVERRIDE
|
||||
|
||||
//
|
||||
// Servos
|
||||
//
|
||||
#define SERVO0_PIN PA0
|
||||
|
||||
//
|
||||
// Limit Switches
|
||||
//
|
||||
#define X_STOP_PIN PA1
|
||||
#define Y_STOP_PIN PB4
|
||||
#define Z_STOP_PIN PA15
|
||||
|
||||
//
|
||||
// Filament runout
|
||||
//
|
||||
#define FIL_RUNOUT_PIN PB5
|
||||
|
||||
//
|
||||
// Steppers
|
||||
//
|
||||
#define X_STEP_PIN PB8
|
||||
#define X_DIR_PIN PB9
|
||||
#define X_ENABLE_PIN PA8
|
||||
|
||||
#define Y_STEP_PIN PB2
|
||||
#define Y_DIR_PIN PB3
|
||||
#define Y_ENABLE_PIN PB1
|
||||
|
||||
#define Z_STEP_PIN PC0
|
||||
#define Z_DIR_PIN PC1
|
||||
#define Z_ENABLE_PIN PC2
|
||||
|
||||
#define E0_STEP_PIN PC15
|
||||
#define E0_DIR_PIN PC14
|
||||
#define E0_ENABLE_PIN PC13
|
||||
|
||||
#define X_HARDWARE_SERIAL MSerial2 // Port correct?
|
||||
#define Y_HARDWARE_SERIAL MSerial2
|
||||
#define Z_HARDWARE_SERIAL MSerial2
|
||||
#define E0_HARDWARE_SERIAL MSerial2
|
||||
|
||||
//
|
||||
// Heaters / Fans
|
||||
//
|
||||
#define HEATER_0_PIN PC6
|
||||
#define HEATER_BED_PIN PC7
|
||||
#ifndef FAN_PIN
|
||||
#define FAN_PIN PC8
|
||||
#endif
|
||||
|
||||
//
|
||||
// Temperature Sensors
|
||||
//
|
||||
#define TEMP_BED_PIN PC5 // Analog Input
|
||||
#define TEMP_0_PIN PC4 // Analog Input
|
||||
|
||||
//
|
||||
// Misc. Functions
|
||||
//
|
||||
#define SDSS PA4
|
||||
|
||||
//
|
||||
// LCD Pins
|
||||
//
|
||||
#if ENABLED(ULTRA_LCD)
|
||||
|
||||
#define BEEPER_PIN PC9
|
||||
|
||||
#if HAS_GRAPHICAL_LCD
|
||||
#define DOGLCD_A0 PB14
|
||||
#define DOGLCD_CS PB12
|
||||
#define DOGLCD_SCK PB13
|
||||
#define DOGLCD_MOSI PB15
|
||||
//#define LCD_SCREEN_ROT_90
|
||||
//#define LCD_SCREEN_ROT_180
|
||||
//#define LCD_SCREEN_ROT_270
|
||||
|
||||
#if ENABLED(FYSETC_MINI_12864) || ENABLED(U8GLIB_ST7920)
|
||||
#define FORCE_SOFT_SPI
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#define LCD_PINS_RS PB12 // CS -- SOFT SPI for ENDER3 LCD
|
||||
#define LCD_PINS_D4 PB13 // SCLK
|
||||
#define LCD_PINS_ENABLE PB15 // DATA MOSI
|
||||
|
||||
// not connected to a pin
|
||||
#define SD_DETECT_PIN PC3
|
||||
|
||||
#ifndef RGB_LED_R_PIN
|
||||
#define RGB_LED_R_PIN PB0
|
||||
#endif
|
||||
#ifndef RGB_LED_G_PIN
|
||||
#define RGB_LED_G_PIN PB7
|
||||
#endif
|
||||
#ifndef RGB_LED_B_PIN
|
||||
#define RGB_LED_B_PIN PB6
|
||||
#endif
|
||||
|
||||
//#define LCD_CONTRAST 190
|
||||
|
||||
#if ENABLED(NEWPANEL)
|
||||
#define BTN_EN1 PC11
|
||||
#define BTN_EN2 PC10
|
||||
#define BTN_ENC PC12
|
||||
#endif
|
||||
|
||||
#endif
|
||||
@ -118,17 +118,18 @@
|
||||
|
||||
#if HAS_DRIVER(TMC2208) || HAS_DRIVER(TMC2209)
|
||||
// Software serial
|
||||
#define X_SERIAL_RX_PIN 71
|
||||
// At the moment, F6 rx pins are not pc interrupt pins
|
||||
#define X_SERIAL_RX_PIN -1 // 71
|
||||
#define X_SERIAL_TX_PIN 72
|
||||
#define Y_SERIAL_RX_PIN 73
|
||||
#define Y_SERIAL_RX_PIN -1 // 73
|
||||
#define Y_SERIAL_TX_PIN 75
|
||||
#define Z_SERIAL_RX_PIN 78
|
||||
#define Z_SERIAL_RX_PIN -1 // 78
|
||||
#define Z_SERIAL_TX_PIN 79
|
||||
#define E0_SERIAL_RX_PIN 76
|
||||
#define E0_SERIAL_RX_PIN -1 // 76
|
||||
#define E0_SERIAL_TX_PIN 77
|
||||
#define E1_SERIAL_RX_PIN 80
|
||||
#define E1_SERIAL_RX_PIN -1 // 80
|
||||
#define E1_SERIAL_TX_PIN 81
|
||||
#define E2_SERIAL_RX_PIN 22
|
||||
#define E2_SERIAL_RX_PIN -1 // 22
|
||||
#define E2_SERIAL_TX_PIN 82
|
||||
#endif
|
||||
|
||||
|
||||
@ -47,7 +47,7 @@
|
||||
// Enable EEPROM Emulation for this board
|
||||
|
||||
//#define FLASH_EEPROM_EMULATION 1
|
||||
//#define E2END 0xFFF //((uint32)(EEPROM_START_ADDRESS + EEPROM_PAGE_SIZE + EEPROM_PAGE_SIZE)) // not 0xFFF
|
||||
//#define E2END 0xFFF //((uint32)(EEPROM_START_ADDRESS + EEPROM_PAGE_SIZE + EEPROM_PAGE_SIZE)) // not 0xFFF
|
||||
//#define EEPROM_CHITCHAT
|
||||
//#define DEBUG_EEPROM_READWRITE
|
||||
|
||||
|
||||
Reference in New Issue
Block a user