bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity

Fixes for TFTGLCD Panel, FastIO (#19614)

Browse Source
This commit is contained in:
Serhiy-K 2020-10-10 13:01:46 +03:00 committed by Scott Lahteine
parent 958f05e4b4
commit 887e2637c0
12 changed files with 107 additions and 157 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

8
Marlin/src/HAL/STM32/fastio.h
View File

@ -63,7 +63,7 @@ void FastIO_init(); // Must be called before using fast io macros
#define _GET_MODE(IO) #define _GET_MODE(IO)
#define _SET_MODE(IO,M) pinMode(IO, M) #define _SET_MODE(IO,M) pinMode(IO, M)
#define _SET_OUTPUT(IO) pinMode(IO, OUTPUT) /*!< Output Push Pull Mode & GPIO_NOPULL */ #define _SET_OUTPUT(IO) pinMode(IO, OUTPUT) //!< Output Push Pull Mode & GPIO_NOPULL
#define _SET_OUTPUT_OD(IO) pinMode(IO, OUTPUT_OPEN_DRAIN) #define _SET_OUTPUT_OD(IO) pinMode(IO, OUTPUT_OPEN_DRAIN)
#define WRITE(IO,V) _WRITE(IO,V) #define WRITE(IO,V) _WRITE(IO,V)
@ -73,9 +73,9 @@ void FastIO_init(); // Must be called before using fast io macros
#define OUT_WRITE(IO,V) do{ _SET_OUTPUT(IO); WRITE(IO,V); }while(0) #define OUT_WRITE(IO,V) do{ _SET_OUTPUT(IO); WRITE(IO,V); }while(0)
#define OUT_WRITE_OD(IO,V) do{ _SET_OUTPUT_OD(IO); WRITE(IO,V); }while(0) #define OUT_WRITE_OD(IO,V) do{ _SET_OUTPUT_OD(IO); WRITE(IO,V); }while(0)
#define SET_INPUT(IO) _SET_MODE(IO, INPUT) /*!< Input Floating Mode */ #define SET_INPUT(IO) _SET_MODE(IO, INPUT) //!< Input Floating Mode
#define SET_INPUT_PULLUP(IO) _SET_MODE(IO, INPUT_PULLUP) /*!< Input with Pull-up activation */ #define SET_INPUT_PULLUP(IO) _SET_MODE(IO, INPUT_PULLUP) //!< Input with Pull-up activation
#define SET_INPUT_PULLDOWN(IO) _SET_MODE(IO, INPUT_PULLDOWN) /*!< Input with Pull-down activation */ #define SET_INPUT_PULLDOWN(IO) _SET_MODE(IO, INPUT_PULLDOWN) //!< Input with Pull-down activation
#define SET_OUTPUT(IO) OUT_WRITE(IO, LOW) #define SET_OUTPUT(IO) OUT_WRITE(IO, LOW)
#define SET_PWM(IO) _SET_MODE(IO, PWM) #define SET_PWM(IO) _SET_MODE(IO, PWM)

2
Marlin/src/core/language.h
View File

@ -303,7 +303,7 @@
#define LCD_STR_C STR_C #define LCD_STR_C STR_C
#define LCD_STR_E STR_E #define LCD_STR_E STR_E
#if HAS_MARLINUI_HD44780 #if EITHER(HAS_MARLINUI_HD44780, IS_TFTGLCD_PANEL)
// Custom characters defined in the first 8 characters of the LCD // Custom characters defined in the first 8 characters of the LCD
#define LCD_STR_BEDTEMP "\x00" // Print only as a char. This will have 'unexpected' results when used in a string! #define LCD_STR_BEDTEMP "\x00" // Print only as a char. This will have 'unexpected' results when used in a string!

2
Marlin/src/core/utility.h
View File

@ -71,7 +71,7 @@ public:
inline void restore() { ref_ = val_; } inline void restore() { ref_ = val_; }
}; };
#define REMEMBER(N,X,V...) restorer<typeof(X)> restorer_##N(X, ##V) #define REMEMBER(N,X,V...) restorer<__typeof__(X)> restorer_##N(X, ##V)
#define RESTORE(N) restorer_##N.restore() #define RESTORE(N) restorer_##N.restore()
// Converts from an uint8_t in the range of 0-255 to an uint8_t // Converts from an uint8_t in the range of 0-255 to an uint8_t

2
Marlin/src/inc/Conditionals_LCD.h
View File

@ -226,9 +226,9 @@
#define LCD_PROGRESS_BAR #define LCD_PROGRESS_BAR
#endif #endif
#if ENABLED(TFTGLCD_PANEL_I2C) #if ENABLED(TFTGLCD_PANEL_I2C)
#define LCD_USE_I2C_BUZZER // Enable buzzer on LCD for I2C and SPI buses (LiquidTWI2 not required)
#define LCD_I2C_ADDRESS 0x27 // Must be equal to panel's I2C slave addres #define LCD_I2C_ADDRESS 0x27 // Must be equal to panel's I2C slave addres
#endif #endif
#define LCD_USE_I2C_BUZZER // Enable buzzer on LCD, used for both I2C and SPI buses (LiquidTWI2 not required)
#define STD_ENCODER_PULSES_PER_STEP 2 #define STD_ENCODER_PULSES_PER_STEP 2
#define STD_ENCODER_STEPS_PER_MENU_ITEM 1 #define STD_ENCODER_STEPS_PER_MENU_ITEM 1
#define LCD_WIDTH 20 // 20 or 24 chars in line #define LCD_WIDTH 20 // 20 or 24 chars in line

2
Marlin/src/inc/Conditionals_post.h
View File

@ -2457,7 +2457,7 @@
/** /**
* Buzzer/Speaker * Buzzer/Speaker
*/ */
#if PIN_EXISTS(BEEPER) || ANY(LCD_USE_I2C_BUZZER, PCA9632_BUZZER, IS_TFTGLCD_PANEL) #if PIN_EXISTS(BEEPER) || ANY(LCD_USE_I2C_BUZZER, PCA9632_BUZZER)
#define HAS_BUZZER 1 #define HAS_BUZZER 1
#if PIN_EXISTS(BEEPER) #if PIN_EXISTS(BEEPER)
#define USE_BEEPER 1 #define USE_BEEPER 1

223
Marlin/src/lcd/TFTGLCD/ultralcd_TFTGLCD.cpp
View File

@ -32,7 +32,7 @@
* and supports color output. * and supports color output.
*/ */
#if NONE(__AVR__, MCU_LPC1768, __STM32F1__, STM32F4xx) #if NONE(__AVR__, TARGET_LPC1768, __STM32F1__, STM32F4xx)
#warning "Selected platform not yet tested. Please contribute your good pin mappings." #warning "Selected platform not yet tested. Please contribute your good pin mappings."
#endif #endif
@ -72,16 +72,17 @@ TFTGLCD lcd;
#define ICON_HOT B01000000 //when any T > 50deg #define ICON_HOT B01000000 //when any T > 50deg
#define PIC_MASK 0x7F #define PIC_MASK 0x7F
//LEDs not used, for compatibility with Smoothieware // LEDs not used, for compatibility with Smoothieware
#define LED_HOTEND_ON B00000001 #define LED_HOTEND_ON B00000001
#define LED_BED_ON B00000010 #define LED_BED_ON B00000010
#define LED_FAN_ON B00000100 #define LED_FAN_ON B00000100
#define LED_HOT B00001000 #define LED_HOT B00001000
#define LED_MASK 0x0F #define LED_MASK 0x0F
#define FBSIZE (LCD_WIDTH * LCD_HEIGHT + 2) #define FBSIZE (LCD_WIDTH * LCD_HEIGHT + 2)
#define MIDDLE_Y ((LCD_HEIGHT - 1) / 2)
//markers for change line color // Markers for change line colors
#define COLOR_EDIT '#' #define COLOR_EDIT '#'
#define COLOR_ERROR '!' #define COLOR_ERROR '!'
@ -114,7 +115,8 @@ enum Commands { // based on Smoothieware commands
GET_LCD_ROW = 0xE0, // for detect panel GET_LCD_ROW = 0xE0, // for detect panel
GET_LCD_COL, // reserved for compatibility with Smoothieware, not used GET_LCD_COL, // reserved for compatibility with Smoothieware, not used
LCD_PUT, // write one line to LCD LCD_PUT, // write one line to LCD
INIT_SCREEN = 0xFE, // clear panel buffer CLR_SCREEN,
INIT_SCREEN = 0xFE // clear panel buffer
}; };
static unsigned char framebuffer[FBSIZE]; static unsigned char framebuffer[FBSIZE];
@ -123,28 +125,62 @@ static uint8_t cour_line;
static uint8_t picBits, ledBits, hotBits; static uint8_t picBits, ledBits, hotBits;
static uint8_t PanelDetected = 0; static uint8_t PanelDetected = 0;
// Different platforms use different SPI methods
#if ANY(__AVR__, TARGET_LPC1768, __STM32F1__, ARDUINO_ARCH_SAM, __SAMD51__, __MK20DX256__, __MK64FX512__)
#define SPI_SEND_ONE(V) SPI.transfer(V);
#define SPI_SEND_TWO(V) SPI.transfer16(V);
#elif defined(STM32F4xx)
#define SPI_SEND_ONE(V) SPI.transfer(V, SPI_CONTINUE);
#define SPI_SEND_TWO(V) SPI.transfer16(V, SPI_CONTINUE);
#elif defined(ARDUINO_ARCH_ESP32)
#define SPI_SEND_ONE(V) SPI.write(V);
#define SPI_SEND_TWO(V) SPI.write16(V);
#endif
#if ANY(__AVR__, ARDUINO_ARCH_SAM, __SAMD51__, __MK20DX256__, __MK64FX512__)
#define SPI_SEND_SOME(V,L,Z) SPI.transfer(&V[Z], L);
#elif defined(STM32F4xx)
#define SPI_SEND_SOME(V,L,Z) SPI.transfer(&V[Z], L, SPI_CONTINUE);
#elif ANY(TARGET_LPC1768, __STM32F1__, ARDUINO_ARCH_ESP32)
#define SPI_SEND_SOME(V,L,Z) do{ for (uint16_t i = 0; i < L; i++) SPI_SEND_ONE(V[(Z)+i]); }while(0)
#endif
// Constructor // Constructor
TFTGLCD::TFTGLCD() {} TFTGLCD::TFTGLCD() {}
//clearing local buffer // Clear local buffer
void TFTGLCD::clear_buffer() { void TFTGLCD::clear_buffer() {
memset(&framebuffer[0], ' ', FBSIZE - 2); memset(&framebuffer[0], ' ', FBSIZE - 2);
framebuffer[FBSIZE - 1] = framebuffer[FBSIZE - 2] = 0; framebuffer[FBSIZE - 1] = framebuffer[FBSIZE - 2] = 0;
picBits = ledBits = 0; picBits = ledBits = 0;
} }
//set new text cursor position // Clear panel's screen
void TFTGLCD::clr_screen() {
if (!PanelDetected) return;
#if ENABLED(TFTGLCD_PANEL_SPI)
WRITE(TFTGLCD_CS, LOW);
SPI_SEND_ONE(CLR_SCREEN);
WRITE(TFTGLCD_CS, HIGH);
#else
Wire.beginTransmission((uint8_t)LCD_I2C_ADDRESS); //set I2C device address
Wire.write(CLR_SCREEN);
Wire.endTransmission(); //transmit data
#endif
}
// Set new text cursor position
void TFTGLCD::setCursor(uint8_t col, uint8_t row) { void TFTGLCD::setCursor(uint8_t col, uint8_t row) {
fb = &framebuffer[0] + col + row * LCD_WIDTH; fb = &framebuffer[0] + col + row * LCD_WIDTH;
cour_line = row; cour_line = row;
} }
//send char to buffer // Send char to buffer
void TFTGLCD::write(char c) { void TFTGLCD::write(char c) {
*fb++ = c; *fb++ = c;
} }
//send text line to buffer // Send text line to buffer
void TFTGLCD::print(const char *line) { void TFTGLCD::print(const char *line) {
while (*line) *fb++ = *line++; while (*line) *fb++ = *line++;
} }
@ -154,27 +190,9 @@ void TFTGLCD::print_line() {
if (!PanelDetected) return; if (!PanelDetected) return;
#if ENABLED(TFTGLCD_PANEL_SPI) #if ENABLED(TFTGLCD_PANEL_SPI)
WRITE(TFTGLCD_CS, LOW); WRITE(TFTGLCD_CS, LOW);
#ifdef __AVR__ SPI_SEND_ONE(LCD_PUT);
SPI.transfer(LCD_PUT); SPI_SEND_ONE(cour_line);
SPI.transfer(cour_line); SPI_SEND_SOME(framebuffer, LCD_WIDTH, cour_line * LCD_WIDTH);
SPI.transfer(&framebuffer[cour_line * LCD_WIDTH], LCD_WIDTH);
#elif EITHER(MCU_LPC1768, __STM32F1__)
SPI.transfer(LCD_PUT);
SPI.transfer(cour_line);
for (uint16_t i = 0; i < LCD_WIDTH; i++) SPI.transfer(framebuffer[cour_line * LCD_WIDTH + i]);
#elif defined(STM32F4xx)
SPI.transfer(LCD_PUT, SPI_CONTINUE);
SPI.transfer(cour_line, SPI_CONTINUE);
SPI.transfer(&framebuffer[cour_line * LCD_WIDTH], LCD_WIDTH, SPI_CONTINUE);
#elif ANY(ARDUINO_ARCH_SAM, __SAMD51__, __MK20DX256__, __MK64FX512__)
SPI.transfer(LCD_PUT);
SPI.transfer(cour_line);
SPI.transfer(&framebuffer[cour_line * LCD_WIDTH], LCD_WIDTH);
#elif defined(ARDUINO_ARCH_ESP32)
SPI.write(LCD_PUT);
SPI.write(cour_line);
for (uint16_t i = 0; i < LCD_WIDTH; i++) SPI.write(framebuffer[cour_line * LCD_WIDTH + i]);
#endif
WRITE(TFTGLCD_CS, HIGH); WRITE(TFTGLCD_CS, HIGH);
#else #else
Wire.beginTransmission((uint8_t)LCD_I2C_ADDRESS); //set I2C device address Wire.beginTransmission((uint8_t)LCD_I2C_ADDRESS); //set I2C device address
@ -193,22 +211,8 @@ void TFTGLCD::print_screen(){
#if ENABLED(TFTGLCD_PANEL_SPI) #if ENABLED(TFTGLCD_PANEL_SPI)
// Send all framebuffer to panel // Send all framebuffer to panel
WRITE(TFTGLCD_CS, LOW); WRITE(TFTGLCD_CS, LOW);
#ifdef __AVR__ SPI_SEND_ONE(LCD_WRITE);
SPI.transfer(LCD_WRITE); SPI_SEND_SOME(framebuffer, FBSIZE, 0);
SPI.transfer(&framebuffer[0], FBSIZE);
#elif EITHER(MCU_LPC1768, __STM32F1__)
SPI.transfer(LCD_WRITE);
for (uint16_t i = 0; i < FBSIZE; i++) SPI.transfer(framebuffer[i]);
#elif defined(STM32F4xx)
SPI.transfer(LCD_WRITE, SPI_CONTINUE);
SPI.transfer(&framebuffer[0], FBSIZE, SPI_CONTINUE);
#elif ANY(ARDUINO_ARCH_SAM, __SAMD51__, __MK20DX256__, __MK64FX512__)
SPI.transfer(LCD_WRITE);
SPI.transfer(&framebuffer[0], FBSIZE);
#elif defined(ARDUINO_ARCH_ESP32)
SPI.write(LCD_WRITE);
for (uint16_t i = 0; i < FBSIZE; i++) SPI.write(framebuffer[i]);
#endif
WRITE(TFTGLCD_CS, HIGH); WRITE(TFTGLCD_CS, HIGH);
#else #else
uint8_t r; uint8_t r;
@ -235,19 +239,8 @@ void TFTGLCD::setContrast(uint16_t contrast) {
if (!PanelDetected) return; if (!PanelDetected) return;
#if ENABLED(TFTGLCD_PANEL_SPI) #if ENABLED(TFTGLCD_PANEL_SPI)
WRITE(TFTGLCD_CS, LOW); WRITE(TFTGLCD_CS, LOW);
#if ANY(__AVR__, MCU_LPC1768, __STM32F1__) SPI_SEND_ONE(CONTRAST);
SPI.transfer(CONTRAST); SPI_SEND_ONE((uint8_t)contrast);
SPI.transfer((uint8_t)contrast);
#elif defined(STM32F4xx)
SPI.transfer(CONTRAST, SPI_CONTINUE);
SPI.transfer((uint8_t)contrast, SPI_CONTINUE);
#elif ANY(ARDUINO_ARCH_SAM, __SAMD51__, __MK20DX256__, __MK64FX512__)
SPI.transfer(CONTRAST);
SPI.transfer((uint8_t)contrast);
#elif defined(ARDUINO_ARCH_ESP32)
SPI.write(CONTRAST);
SPI.write((uint8_t)contrast);
#endif
WRITE(TFTGLCD_CS, HIGH); WRITE(TFTGLCD_CS, HIGH);
#else #else
Wire.beginTransmission((uint8_t)LCD_I2C_ADDRESS); Wire.beginTransmission((uint8_t)LCD_I2C_ADDRESS);
@ -257,37 +250,24 @@ void TFTGLCD::setContrast(uint16_t contrast) {
#endif #endif
} }
//reading buttons and encoder states
extern volatile int8_t encoderDiff; extern volatile int8_t encoderDiff;
// Read buttons and encoder states
uint8_t MarlinUI::read_slow_buttons(void) { uint8_t MarlinUI::read_slow_buttons(void) {
if (!PanelDetected) return 0; if (!PanelDetected) return 0;
#if ENABLED(TFTGLCD_PANEL_SPI) #if ENABLED(TFTGLCD_PANEL_SPI)
uint8_t b = 0; uint8_t b = 0;
WRITE(TFTGLCD_CS, LOW); WRITE(TFTGLCD_CS, LOW);
#if ANY(__AVR__, MCU_LPC1768, __STM32F1__) SPI_SEND_ONE(READ_ENCODER);
SPI.transfer(READ_ENCODER); #ifndef STM32F4xx
WRITE(TFTGLCD_CS, LOW); //for delay WRITE(TFTGLCD_CS, LOW); // for delay
encoderDiff += SPI.transfer(READ_BUTTONS);
WRITE(TFTGLCD_CS, LOW); //for delay
b = SPI.transfer(GET_SPI_DATA);
#elif defined(STM32F4xx)
SPI.transfer(READ_ENCODER, SPI_CONTINUE);
encoderDiff += SPI.transfer(READ_BUTTONS, SPI_CONTINUE);
b = SPI.transfer(GET_SPI_DATA, SPI_CONTINUE);
#elif ANY(ARDUINO_ARCH_SAM, __SAMD51__, __MK20DX256__, __MK64FX512__)
SPI.transfer(READ_ENCODER);
WRITE(TFTGLCD_CS, LOW); //for delay ????
encoderDiff += SPI.transfer(READ_BUTTONS);
WRITE(TFTGLCD_CS, LOW); //for delay ????
b = SPI.transfer(GET_SPI_DATA);
#elif defined(ARDUINO_ARCH_ESP32)
SPI.transfer(READ_ENCODER);
WRITE(TFTGLCD_CS, LOW); //for delay ????
encoderDiff += SPI.transfer(READ_BUTTONS);
WRITE(TFTGLCD_CS, LOW); //for delay ????
b = SPI.transfer(GET_SPI_DATA);
#endif #endif
encoderDiff += SPI_SEND_ONE(READ_BUTTONS);
#ifndef STM32F4xx
WRITE(TFTGLCD_CS, LOW); // for delay
WRITE(TFTGLCD_CS, LOW);
#endif
b = SPI_SEND_ONE(GET_SPI_DATA);
WRITE(TFTGLCD_CS, HIGH); WRITE(TFTGLCD_CS, HIGH);
return b; return b;
#else #else
@ -298,7 +278,7 @@ uint8_t MarlinUI::read_slow_buttons(void) {
Wire.requestFrom((uint8_t)LCD_I2C_ADDRESS, 2, 0, 0, 1); Wire.requestFrom((uint8_t)LCD_I2C_ADDRESS, 2, 0, 0, 1);
#elif defined(__STM32F1__) #elif defined(__STM32F1__)
Wire.requestFrom((uint8_t)LCD_I2C_ADDRESS, (uint8_t)2); Wire.requestFrom((uint8_t)LCD_I2C_ADDRESS, (uint8_t)2);
#elif EITHER(STM32F4xx, MCU_LPC1768) #elif EITHER(STM32F4xx, TARGET_LPC1768)
Wire.requestFrom(LCD_I2C_ADDRESS, 2); Wire.requestFrom(LCD_I2C_ADDRESS, 2);
#endif #endif
encoderDiff += Wire.read(); encoderDiff += Wire.read();
@ -306,28 +286,14 @@ uint8_t MarlinUI::read_slow_buttons(void) {
#endif #endif
} }
// duration in ms, freq in Hz // Duration in ms, freq in Hz
void MarlinUI::buzz(const long duration, const uint16_t freq) { void MarlinUI::buzz(const long duration, const uint16_t freq) {
if (!PanelDetected) return; if (!PanelDetected) return;
#if ENABLED(TFTGLCD_PANEL_SPI) #if ENABLED(TFTGLCD_PANEL_SPI)
WRITE(TFTGLCD_CS, LOW); WRITE(TFTGLCD_CS, LOW);
#if ANY(__AVR__, MCU_LPC1768, __STM32F1__) SPI_SEND_ONE(BUZZER);
SPI.transfer(BUZZER); SPI_SEND_TWO((uint16_t)duration);
SPI.transfer16((uint16_t)duration); SPI_SEND_TWO(freq);
SPI.transfer16(freq);
#elif defined(STM32F4xx)
SPI.transfer(BUZZER, SPI_CONTINUE);
SPI.transfer16((uint16_t)duration, SPI_CONTINUE);
SPI.transfer16(freq, SPI_CONTINUE);
#elif ANY(ARDUINO_ARCH_SAM, __SAMD51__, __MK20DX256__, __MK64FX512__)
SPI.transfer(BUZZER);
SPI.transfer16((uint16_t)duration);
SPI.transfer16(freq);
#elif defined(ARDUINO_ARCH_ESP32)
SPI.write(BUZZER);
SPI.write16((uint16_t)duration);
SPI.write16(freq);
#endif
WRITE(TFTGLCD_CS, HIGH); WRITE(TFTGLCD_CS, HIGH);
#else #else
Wire.beginTransmission((uint8_t)LCD_I2C_ADDRESS); Wire.beginTransmission((uint8_t)LCD_I2C_ADDRESS);
@ -346,24 +312,14 @@ void MarlinUI::init_lcd() {
t = 0; t = 0;
#if ENABLED(TFTGLCD_PANEL_SPI) #if ENABLED(TFTGLCD_PANEL_SPI)
// SPI speed must be less 10MHz // SPI speed must be less 10MHz
OUT_WRITE(TFTGLCD_CS, HIGH); _SET_OUTPUT(TFTGLCD_CS);
WRITE(TFTGLCD_CS, HIGH);
spiInit(TERN(__STM32F1__, SPI_QUARTER_SPEED, SPI_FULL_SPEED)); spiInit(TERN(__STM32F1__, SPI_QUARTER_SPEED, SPI_FULL_SPEED));
WRITE(TFTGLCD_CS, LOW); WRITE(TFTGLCD_CS, LOW);
#if ANY(__AVR__, MCU_LPC1768, __STM32F1__) SPI_SEND_ONE(GET_LCD_ROW);
SPI.transfer(GET_LCD_ROW); t = SPI_SEND_ONE(GET_SPI_DATA);
t = SPI.transfer(GET_SPI_DATA);
#elif defined(STM32F4xx)
SPI.transfer(GET_LCD_ROW, SPI_CONTINUE);
t = SPI.transfer(GET_SPI_DATA, SPI_CONTINUE);
#elif ANY(ARDUINO_ARCH_SAM, __SAMD51__, __MK20DX256__, __MK64FX512__)
SPI.transfer(GET_LCD_ROW);
t = SPI.transfer(GET_SPI_DATA);
#elif defined(ARDUINO_ARCH_ESP32)
SPI.write(GET_LCD_ROW);
t = SPI.transfer(GET_SPI_DATA);
#endif
#else #else
#ifdef MCU_LPC1768 #ifdef TARGET_LPC1768
Wire.begin(); //init twi/I2C Wire.begin(); //init twi/I2C
#else #else
Wire.begin((uint8_t)LCD_I2C_ADDRESS); //init twi/I2C Wire.begin((uint8_t)LCD_I2C_ADDRESS); //init twi/I2C
@ -373,7 +329,7 @@ void MarlinUI::init_lcd() {
Wire.endTransmission(); // send buffer Wire.endTransmission(); // send buffer
#ifdef __AVR__ #ifdef __AVR__
Wire.requestFrom((uint8_t)LCD_I2C_ADDRESS, 1, 0, 0, 1); Wire.requestFrom((uint8_t)LCD_I2C_ADDRESS, 1, 0, 0, 1);
#elif ANY(__STM32F1__, STM32F4xx, MCU_LPC1768) #elif ANY(__STM32F1__, STM32F4xx, TARGET_LPC1768)
Wire.requestFrom(LCD_I2C_ADDRESS, 1); Wire.requestFrom(LCD_I2C_ADDRESS, 1);
#endif #endif
t = (uint8_t)Wire.read(); t = (uint8_t)Wire.read();
@ -382,20 +338,8 @@ void MarlinUI::init_lcd() {
if (t == LCD_HEIGHT) { if (t == LCD_HEIGHT) {
PanelDetected = 1; PanelDetected = 1;
#if ENABLED(TFTGLCD_PANEL_SPI) #if ENABLED(TFTGLCD_PANEL_SPI)
PanelDetected = 1; SPI_SEND_ONE(INIT_SCREEN);
#if ANY(__AVR__, MCU_LPC1768, __STM32F1__) SPI_SEND_ONE(Marlin);
SPI.transfer(INIT_SCREEN);
SPI.transfer(Marlin);
#elif defined(STM32F4xx)
SPI.transfer(INIT_SCREEN, SPI_CONTINUE);
SPI.transfer(Marlin, SPI_CONTINUE);
#elif ANY(ARDUINO_ARCH_SAM, __SAMD51__, __MK20DX256__, __MK64FX512__)
SPI.transfer(INIT_SCREEN);
SPI.transfer(Marlin);
#elif defined(ARDUINO_ARCH_ESP32)
SPI.write(INIT_SCREEN);
SPI.write(Marlin);
#endif
WRITE(TFTGLCD_CS, HIGH); WRITE(TFTGLCD_CS, HIGH);
#else #else
Wire.beginTransmission((uint8_t)LCD_I2C_ADDRESS); Wire.beginTransmission((uint8_t)LCD_I2C_ADDRESS);
@ -415,8 +359,8 @@ bool MarlinUI::detected() {
void MarlinUI::clear_lcd() { void MarlinUI::clear_lcd() {
if (!PanelDetected) return; if (!PanelDetected) return;
lcd.clr_screen();
lcd.clear_buffer(); lcd.clear_buffer();
lcd.print_screen();
} }
int16_t MarlinUI::contrast; // Initialized by settings.load() int16_t MarlinUI::contrast; // Initialized by settings.load()
@ -583,10 +527,10 @@ FORCE_INLINE void _draw_heater_status(const heater_id_t heater_id, const char *p
lcd.write('%'); lcd.write(percent); lcd.write('%'); lcd.write(percent);
} }
else { // For progress bar test else { // For progress bar test
lcd.setCursor(LCD_WIDTH / 2 - 2, LCD_HEIGHT / 2 - 2); lcd.setCursor(LCD_WIDTH / 2 - 2, MIDDLE_Y);
lcd.print(i16tostr3rj(percent)); lcd.write('%'); lcd.print(i16tostr3rj(percent)); lcd.write('%');
lcd.print_line(); lcd.print_line();
lcd.setCursor(0, LCD_HEIGHT / 2 - 1); lcd.setCursor(0, MIDDLE_Y + 1);
lcd.write('%'); lcd.write(percent); lcd.write('%'); lcd.write(percent);
lcd.print_line(); lcd.print_line();
} }
@ -912,16 +856,17 @@ void MarlinUI::draw_status_screen() {
} }
// Low-level draw_edit_screen can be used to draw an edit screen from anyplace // Low-level draw_edit_screen can be used to draw an edit screen from anyplace
// This line moves to the last line of the screen for UBL plot screen on the panel side
void MenuEditItemBase::draw_edit_screen(PGM_P const pstr, const char* const value/*=nullptr*/) { void MenuEditItemBase::draw_edit_screen(PGM_P const pstr, const char* const value/*=nullptr*/) {
if (!PanelDetected) return; if (!PanelDetected) return;
ui.encoder_direction_normal(); ui.encoder_direction_normal();
lcd.setCursor(0, LCD_HEIGHT - 1); //last line is free most time lcd.setCursor(0, MIDDLE_Y);
lcd.write(COLOR_EDIT); lcd.write(COLOR_EDIT);
lcd_put_u8str_P(pstr); lcd_put_u8str_P(pstr);
if (value != nullptr) { if (value != nullptr) {
lcd.write(':'); lcd.write(':');
lcd.setCursor((LCD_WIDTH - 1) - (utf8_strlen(value) + 1), LCD_HEIGHT - 1); // Right-justified, padded by spaces lcd.setCursor((LCD_WIDTH - 1) - (utf8_strlen(value) + 1), MIDDLE_Y); // Right-justified, padded by spaces
lcd.write(' '); // Overwrite char if value gets shorter lcd.write(' '); // Overwrite char if value gets shorter
lcd.print(value); lcd.print(value);
lcd.write(' '); lcd.write(' ');
lcd.print_line(); lcd.print_line();
@ -932,10 +877,10 @@ void MarlinUI::draw_status_screen() {
void MenuItem_confirm::draw_select_screen(PGM_P const yes, PGM_P const no, const bool yesno, PGM_P const pref, const char * const string, PGM_P const suff) { void MenuItem_confirm::draw_select_screen(PGM_P const yes, PGM_P const no, const bool yesno, PGM_P const pref, const char * const string, PGM_P const suff) {
if (!PanelDetected) return; if (!PanelDetected) return;
ui.draw_select_screen_prompt(pref, string, suff); ui.draw_select_screen_prompt(pref, string, suff);
lcd.setCursor(0, LCD_HEIGHT - 1); lcd.setCursor(0, MIDDLE_Y);
lcd.write(COLOR_EDIT); lcd.write(COLOR_EDIT);
lcd.write(yesno ? ' ' : '['); lcd_put_u8str_P(no); lcd.write(yesno ? ' ' : ']'); lcd.write(yesno ? ' ' : '['); lcd_put_u8str_P(no); lcd.write(yesno ? ' ' : ']');
lcd.setCursor(LCD_WIDTH - utf8_strlen_P(yes) - 3, LCD_HEIGHT - 1); lcd.setCursor(LCD_WIDTH - utf8_strlen_P(yes) - 3, MIDDLE_Y);
lcd.write(yesno ? '[' : ' '); lcd_put_u8str_P(yes); lcd.write(yesno ? ']' : ' '); lcd.write(yesno ? '[' : ' '); lcd_put_u8str_P(yes); lcd.write(yesno ? ']' : ' ');
lcd.print_line(); lcd.print_line();
} }

1
Marlin/src/lcd/TFTGLCD/ultralcd_TFTGLCD.h
View File

@ -45,6 +45,7 @@ class TFTGLCD {
public: public:
TFTGLCD(); TFTGLCD();
void clear_buffer(); void clear_buffer();
void clr_screen();
void setCursor(uint8_t col, uint8_t row); void setCursor(uint8_t col, uint8_t row);
void write(char c); void write(char c);
void print(const char *line); void print(const char *line);

16
Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_4.h
View File

@ -223,14 +223,14 @@
#endif #endif
/** /**
* _____ _____ * _____ _____
* NC | · · | GND 5V | · · | GND * NC | · · | GND 5V | · · | GND
* RESET | · · | 1.31(SD_DETECT) (LCD_D7) 1.23 | · · | 1.22 (LCD_D6) * RESET | · · | 1.31 (SD_DETECT) (LCD_D7) 1.23 | · · | 1.22 (LCD_D6)
* (MOSI)0.18 | · · | 3.25(BTN_EN2) (LCD_D5) 1.21 | · · | 1.20 (LCD_D4) * (MOSI) 0.18 | · · | 3.25 (BTN_EN2) (LCD_D5) 1.21 | · · | 1.20 (LCD_D4)
* (SD_SS)0.16 | · · | 3.26(BTN_EN1) (LCD_RS) 1.19 | · · | 1.18 (LCD_EN) * (SD_SS) 0.16 | · · | 3.26 (BTN_EN1) (LCD_RS) 1.19 | · · | 1.18 (LCD_EN)
* (SCK)0.15 | · · | 0.17(MISO) (BTN_ENC) 0.28 | · · | 1.30 (BEEPER) * (SCK) 0.15 | · · | 0.17 (MISO) (BTN_ENC) 0.28 | · · | 1.30 (BEEPER)
* ----- ----- * ----- -----
* EXP2 EXP1 * EXP2 EXP1
*/ */
#if HAS_WIRED_LCD #if HAS_WIRED_LCD
#if ENABLED(ANET_FULL_GRAPHICS_LCD) #if ENABLED(ANET_FULL_GRAPHICS_LCD)

2
Marlin/src/pins/lpc1768/pins_BTT_SKR_common.h
View File

@ -92,7 +92,7 @@
// //
// LCD / Controller // LCD / Controller
// //
#if HAS_WIRED_LCD #if HAS_WIRED_LCD && DISABLED(LCD_USE_I2C_BUZZER)
#define BEEPER_PIN P1_30 // (37) not 5V tolerant #define BEEPER_PIN P1_30 // (37) not 5V tolerant
#endif #endif

3
Marlin/src/pins/stm32f0/pins_MALYAN_M300.h
View File

@ -33,6 +33,9 @@
// //
#if NO_EEPROM_SELECTED #if NO_EEPROM_SELECTED
#define FLASH_EEPROM_EMULATION #define FLASH_EEPROM_EMULATION
#ifndef MARLIN_EEPROM_SIZE
#define MARLIN_EEPROM_SIZE 0x800U // 2KB
#endif
#endif #endif
// //

1
Marlin/src/pins/stm32f1/pins_MORPHEUS.h
View File

@ -89,3 +89,4 @@
// //
#define LED_PIN PC13 #define LED_PIN PC13
#define SDSS PA3 #define SDSS PA3
#define TFTGLCD_CS PA4