bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity

BTT E3 RRF Support

Browse Source
This commit is contained in:
Scott Lahteine
2021-04-18 14:17:37 -05:00
committed by Scott Lahteine
parent 8e60b19662
commit 86397df32d
10 changed files with 1628 additions and 15 deletions
Download Patch File Download Diff File Expand all files Collapse all files

31
Marlin/src/core/boards.h
View File

@ -366,21 +366,22 @@
#define BOARD_BTT_SKR_PRO_V1_1 4207 // BigTreeTech SKR Pro v1.1 (STM32F407ZG)
#define BOARD_BTT_SKR_PRO_V1_2 4208 // BigTreeTech SKR Pro v1.2 (STM32F407ZG)
#define BOARD_BTT_BTT002_V1_0 4209 // BigTreeTech BTT002 v1.0 (STM32F407VG)
#define BOARD_BTT_GTR_V1_0 4210 // BigTreeTech GTR v1.0 (STM32F407IGT)
#define BOARD_LERDGE_K 4211 // Lerdge K (STM32F407ZG)
#define BOARD_LERDGE_S 4212 // Lerdge S (STM32F407VE)
#define BOARD_LERDGE_X 4213 // Lerdge X (STM32F407VE)
#define BOARD_VAKE403D 4214 // VAkE 403D (STM32F446VET6)
#define BOARD_FYSETC_S6 4215 // FYSETC S6 (STM32F446VET6)
#define BOARD_FYSETC_S6_V2_0 4216 // FYSETC S6 v2.0 (STM32F446VET6)
#define BOARD_FYSETC_SPIDER 4217 // FYSETC Spider (STM32F446VET6)
#define BOARD_FLYF407ZG 4218 // FLYF407ZG (STM32F407ZG)
#define BOARD_MKS_ROBIN2 4219 // MKS_ROBIN2 (STM32F407ZE)
#define BOARD_MKS_ROBIN_PRO_V2 4220 // MKS Robin Pro V2 (STM32F407VE)
#define BOARD_MKS_ROBIN_NANO_V3 4221 // MKS Robin Nano V3 (STM32F407VG)
#define BOARD_ANET_ET4 4222 // ANET ET4 V1.x (STM32F407VGT6)
#define BOARD_ANET_ET4P 4223 // ANET ET4P V1.x (STM32F407VGT6)
#define BOARD_FYSETC_CHEETAH_V20 4224 // FYSETC Cheetah V2.0
#define BOARD_BTT_E3_RRF 4210 // BigTreeTech E3 RRF (STM32F407VGT6)
#define BOARD_BTT_GTR_V1_0 4211 // BigTreeTech GTR v1.0 (STM32F407IGT)
#define BOARD_LERDGE_K 4212 // Lerdge K (STM32F407ZG)
#define BOARD_LERDGE_S 4213 // Lerdge S (STM32F407VE)
#define BOARD_LERDGE_X 4214 // Lerdge X (STM32F407VE)
#define BOARD_VAKE403D 4215 // VAkE 403D (STM32F446VET6)
#define BOARD_FYSETC_S6 4216 // FYSETC S6 (STM32F446VET6)
#define BOARD_FYSETC_S6_V2_0 4217 // FYSETC S6 v2.0 (STM32F446VET6)
#define BOARD_FYSETC_SPIDER 4218 // FYSETC Spider (STM32F446VET6)
#define BOARD_FLYF407ZG 4219 // FLYF407ZG (STM32F407ZG)
#define BOARD_MKS_ROBIN2 4220 // MKS_ROBIN2 (STM32F407ZE)
#define BOARD_MKS_ROBIN_PRO_V2 4221 // MKS Robin Pro V2 (STM32F407VE)
#define BOARD_MKS_ROBIN_NANO_V3 4222 // MKS Robin Nano V3 (STM32F407VG)
#define BOARD_ANET_ET4 4223 // ANET ET4 V1.x (STM32F407VGT6)
#define BOARD_ANET_ET4P 4224 // ANET ET4P V1.x (STM32F407VGT6)
#define BOARD_FYSETC_CHEETAH_V20 4225 // FYSETC Cheetah V2.0
//
// ARM Cortex M7

2
Marlin/src/pins/pins.h
View File

@ -594,6 +594,8 @@
#include "stm32f4/pins_BTT_GTR_V1_0.h" // STM32F4 env:BIGTREE_GTR_V1_0 env:BIGTREE_GTR_V1_0_usb_flash_drive
#elif MB(BTT_BTT002_V1_0)
#include "stm32f4/pins_BTT_BTT002_V1_0.h" // STM32F4 env:BIGTREE_BTT002
#elif MB(BTT_E3_RRF)
#include "stm32f4/pins_BTT_E3_RRF.h" // STM32F4 env:BIGTREE_E3_RRF
#elif MB(LERDGE_K)
#include "stm32f4/pins_LERDGE_K.h" // STM32F4 env:LERDGEK env:LERDGEK_usb_flash_drive
#elif MB(LERDGE_S)

375
Marlin/src/pins/stm32f4/pins_BTT_E3_RRF.h Normal file
View File

@ -0,0 +1,375 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
#if NOT_TARGET(STM32F4)
#error "Oops! Select an STM32F4 board in 'Tools > Board.'"
#endif
#ifndef BOARD_INFO_NAME
#define BOARD_INFO_NAME "BTT E3 RRF"
#endif
#define FPC2_PIN PB11
#define FPC3_PIN PB10
#define FPC4_PIN PE12
#define FPC5_PIN PE13
#define FPC6_PIN PE14
#define FPC7_PIN PE15
#define FPC8_PIN PA3
#define FPC9_PIN PA2
#define FPC10_PIN PA8
#define FPC11_PIN PC15
#define FPC12_PIN PC14
#define FPC13_PIN PC13
#define FPC14_PIN PE6
#define FPC15_PIN PE5
#define FPC16_PIN PE4
#define FPC17_PIN PE3
//#define BTT_E3_RRF_IDEX_BOARD
#ifdef BTT_E3_RRF_IDEX_BOARD
#define X2_ENABLE_PIN FPC13_PIN // X2EN
#define X2_STEP_PIN FPC11_PIN // X2STP
#define X2_DIR_PIN FPC10_PIN // X2DIR
#define X2_SERIAL_TX_PIN FPC12_PIN // X2UART
#define X2_SERIAL_RX_PIN FPC12_PIN // X2UART
#if X_HOME_DIR < 0
#define X_MAX_PIN FPC2_PIN // X2-STOP
#else
#define X_MIN_PIN FPC2_PIN // X2-STOP
#endif
#define E1_ENABLE_PIN FPC7_PIN // E1EN
#define E1_STEP_PIN FPC5_PIN // E1STP
#define E1_DIR_PIN FPC4_PIN // E1DIR
#define E1_SERIAL_TX_PIN FPC6_PIN // E1UART
#define E1_SERIAL_RX_PIN FPC6_PIN // E1UART
#ifndef FIL1_RUNOUT2_PIN
#define FIL_RUNOUT2_PIN FPC3_PIN // E1-STOP
#endif
#define HEATER_1_PIN FPC16_PIN // "HE1"
#define PT100_PIN FPC8_PIN // Analog Input "PT100"(INA826)
#define TEMP_1_PIN FPC9_PIN // Analog Input "TH1"
#define FAN1_PIN FPC15_PIN // "FAN0" in IDEX board
#define FAN2_PIN FPC14_PIN // "FAN1" in IDEX board
#endif
// Onboard I2C EEPROM
#define I2C_EEPROM
#define MARLIN_EEPROM_SIZE 0x1000 // 4KB
//
// Servos
//
#define SERVO0_PIN PB0 // SERVOS
//
// Limit Switches
//
#define X_STOP_PIN PC0 // X-STOP
#define Y_STOP_PIN PC1 // Y-STOP
#define Z_STOP_PIN PC2 // Z-STOP
//
// Z Probe must be this pin
//
#define Z_MIN_PROBE_PIN PC5 // PROBE
//
// Filament Runout Sensor
//
#ifndef FIL_RUNOUT_PIN
#define FIL_RUNOUT_PIN PC3 // E0-STOP
#endif
//
// Power-loss Detection
//
#ifndef POWER_LOSS_PIN
#define POWER_LOSS_PIN PE0 // Power Loss Detection: PWR-DET
#endif
//
// Steppers
//
#define X_ENABLE_PIN PD7
#define X_STEP_PIN PD5
#define X_DIR_PIN PD4
#define Y_ENABLE_PIN PD3
#define Y_STEP_PIN PD0
#define Y_DIR_PIN PA15
#define Z_ENABLE_PIN PD14
#define Z_STEP_PIN PC6
#define Z_DIR_PIN PC7
#define E0_ENABLE_PIN PD10
#define E0_STEP_PIN PD12
#define E0_DIR_PIN PD13
/**
* TMC2208/TMC2209 stepper drivers
*/
#if HAS_TMC_UART
//
// Software serial
//
#define X_SERIAL_TX_PIN PD6
#define X_SERIAL_RX_PIN PD6
#define Y_SERIAL_TX_PIN PD1
#define Y_SERIAL_RX_PIN PD1
#define Z_SERIAL_TX_PIN PD15
#define Z_SERIAL_RX_PIN PD15
#define E0_SERIAL_TX_PIN PD11
#define E0_SERIAL_RX_PIN PD11
// Reduce baud rate to improve software serial reliability
#define TMC_BAUD_RATE 19200
#endif
//
// Temperature Sensors
//
#define TEMP_BED_PIN PA1 // Analog Input "TB"
#define TEMP_0_PIN PA0 // Analog Input "TH0"
//
// Heaters / Fans
//
#define HEATER_BED_PIN PB4 // "HB"
#define HEATER_0_PIN PB3 // "HE0"
#define FAN_PIN PB5 // "FAN0"
//#define FAN1_PIN PB6 // "FAN1"
#ifndef CONTROLLER_FAN_PIN
#define CONTROLLER_FAN_PIN PB6 // "FAN1"
#endif
#ifndef NEOPIXEL_PIN
#define NEOPIXEL_PIN PB7 // LED driving pin
#endif
#ifndef PS_ON_PIN
#define PS_ON_PIN PE1 // Power Supply Control
#endif
/**
* BTT E3 RRF
* _____
* 5V | 1 2 | GND
* (LCD_EN) PE11 | 3 4 | PB1 (LCD_RS)
* (LCD_D4) PE10 | 5 6 PB2 (BTN_EN2)
* RESET | 7 8 | PE7 (BTN_EN1)
* (BTN_ENC) PE9 | 9 10| PE8 (BEEPER)
* -----
* EXP1
*/
#if HAS_WIRED_LCD
#if ENABLED(CR10_STOCKDISPLAY)
#define BEEPER_PIN PE8
#define BTN_ENC PE9
#define BTN_EN1 PE7
#define BTN_EN2 PB2
#define LCD_PINS_RS PB1
#define LCD_PINS_ENABLE PE11
#define LCD_PINS_D4 PE10
// CR10_STOCKDISPLAY default timing is too fast
#undef BOARD_ST7920_DELAY_1
#undef BOARD_ST7920_DELAY_2
#undef BOARD_ST7920_DELAY_3
#elif ENABLED(ZONESTAR_LCD) // ANET A8 LCD Controller - Must convert to 3.3V - CONNECTING TO 5V WILL DAMAGE THE BOARD!
#error "CAUTION! ZONESTAR_LCD requires wiring modifications. See 'pins_BTT_E3_RRF.h' for details. Comment out this line to continue."
#define LCD_PINS_RS PE10
#define LCD_PINS_ENABLE PE9
#define LCD_PINS_D4 PB1
#define LCD_PINS_D5 PB2
#define LCD_PINS_D6 PE7
#define LCD_PINS_D7 PE8
#define ADC_KEYPAD_PIN PB0 // Repurpose servo pin for ADC - CONNECTING TO 5V WILL DAMAGE THE BOARD!
#elif EITHER(MKS_MINI_12864, ENDER2_STOCKDISPLAY)
#define BTN_ENC PE9
#define BTN_EN1 PE7
#define BTN_EN2 PB2
#define DOGLCD_CS PB1
#define DOGLCD_A0 PE10
#define DOGLCD_SCK PE8
#define DOGLCD_MOSI PE11
#define FORCE_SOFT_SPI
#define LCD_BACKLIGHT_PIN -1
#elif IS_TFTGLCD_PANEL
#if ENABLED(TFTGLCD_PANEL_SPI)
#error "CAUTION! TFTGLCD_PANEL_SPI requires wiring modifications. See 'pins_BTT_E3_RRF.h' for details. Comment out this line to continue."
/**
* TFTGLCD_PANEL_SPI display pinout
*
* Board Display
* _____ _____
* 5V | 1 2 | GND (SPI1-MISO) MISO | 1 2 | SCK (SPI1-SCK)
* (FREE) PE11 | 3 4 | PB1 (LCD_CS) (PE7) LCD_CS | 3 4 | SD_CS (PB2)
* (FREE) PE10 | 5 6 | PB2 (SD_CS) (FREE) | 5 6 | MOSI (SPI1-MOSI)
* RESET | 7 8 | PE7 (MOD_RESET) (PE8) SD_DET | 7 8 | (FREE)
* (BEEPER) PE9 | 9 10| PE8 (SD_DET) GND | 9 10| 5V
* ----- -----
* EXP1 EXP1
*
* Needs custom cable:
*
* Board Adapter Display
* _________
* EXP1-1 ----------- EXP1-10
* EXP1-2 ----------- EXP1-9
* SPI1-4 ----------- EXP1-6
* EXP1-4 ----------- FREE
* SPI1-3 ----------- EXP1-2
* EXP1-6 ----------- EXP1-4
* EXP1-7 ----------- FREE
* EXP1-8 ----------- EXP1-3
* SPI1-1 ----------- EXP1-1
* EXP1-10 ----------- EXP1-7
*/
#define TFTGLCD_CS PE7
#endif
#else
#error "Only CR10_STOCKDISPLAY, ZONESTAR_LCD, ENDER2_STOCKDISPLAY, MKS_MINI_12864, and TFTGLCD_PANEL_(SPI|I2C) are currently supported on the BTT_E3_RRF."
#endif
// Alter timing for graphical display
#if HAS_MARLINUI_U8GLIB
#ifndef BOARD_ST7920_DELAY_1
#define BOARD_ST7920_DELAY_1 DELAY_NS(96)
#endif
#ifndef BOARD_ST7920_DELAY_2
#define BOARD_ST7920_DELAY_2 DELAY_NS(48)
#endif
#ifndef BOARD_ST7920_DELAY_3
#define BOARD_ST7920_DELAY_3 DELAY_NS(600)
#endif
#endif
#endif // HAS_WIRED_LCD
#if BOTH(TOUCH_UI_FTDI_EVE, LCD_FYSETC_TFT81050)
#error "CAUTION! LCD_FYSETC_TFT81050 requires wiring modifications. See 'pins_BTT_E3_RRF.h' for details. Comment out this line to continue."
/** FYSETC TFT TFT81050 display pinout
*
* Board Display
* _____ _____
* 5V | 1 2 | GND (SPI1-MISO) MISO | 1 2 | SCK (SPI1-SCK)
* (FREE) PE11 | 3 4 | PB1 (LCD_CS) (PE7) MOD_RESET | 3 4 | SD_CS (PB2)
* (FREE) PE10 | 5 6 | PB2 (SD_CS) (PB1) LCD_CS | 5 6 | MOSI (SPI1-MOSI)
* RESET | 7 8 | PE7 (MOD_RESET) (PE8) SD_DET | 7 8 | RESET
* (BEEPER) PE9 | 9 10| PE8 (SD_DET) GND | 9 10| 5V
* ----- -----
* EXP1 EXP1
*
* Needs custom cable:
*
* Board Adapter Display
* _________
* EXP1-1 ----------- EXP1-10
* EXP1-2 ----------- EXP1-9
* SPI1-4 ----------- EXP1-6
* EXP1-4 ----------- EXP1-5
* SPI1-3 ----------- EXP1-2
* EXP1-6 ----------- EXP1-4
* EXP1-7 ----------- EXP1-8
* EXP1-8 ----------- EXP1-3
* SPI1-1 ----------- EXP1-1
* EXP1-10 ----------- EXP1-7
*/
#define CLCD_SPI_BUS 1 // SPI1 connector
#define BEEPER_PIN PE9
#define CLCD_MOD_RESET PE7
#define CLCD_SPI_CS PB1
#endif // TOUCH_UI_FTDI_EVE && LCD_FYSETC_TFT81050
//
// SD Support
//
#ifndef SDCARD_CONNECTION
#define SDCARD_CONNECTION ONBOARD
#endif
#if SD_CONNECTION_IS(ONBOARD)
#define SDIO_SUPPORT // Use SDIO for onboard SD
#define SDIO_D0_PIN PC8
#define SDIO_D1_PIN PC9
#define SDIO_D2_PIN PC10
#define SDIO_D3_PIN PC11
#define SDIO_CK_PIN PC12
#define SDIO_CMD_PIN PD2
//#define SDIO_CLOCK 48000000
#define SD_DETECT_PIN PC4
#elif SD_CONNECTION_IS(CUSTOM_CABLE)
#error "SD CUSTOM_CABLE is not compatible with BTT E3 RRF."
#endif
//
// WIFI
//
#define ESP_WIFI_MODULE_COM 3 // Must also set either SERIAL_PORT or SERIAL_PORT_2 to this
#define ESP_WIFI_MODULE_BAUDRATE BAUDRATE // Must use same BAUDRATE as SERIAL_PORT & SERIAL_PORT_2
#define ESP_WIFI_MODULE_RESET_PIN PA4
#define ESP_WIFI_MODULE_ENABLE_PIN PA5
#define ESP_WIFI_MODULE_GPIO0_PIN PA6