✨ "Rutilea" ESP32 board (#22880)
This commit is contained in:
Scott Lahteine
89
Marlin/src/pins/esp32/pins_ESPA_common.h
Normal file
89
Marlin/src/pins/esp32/pins_ESPA_common.h
Normal file
@ -0,0 +1,89 @@
|
||||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <https://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
/**
|
||||
* ESPA-like pin assignments
|
||||
* Supports 4 stepper drivers, heated bed, single hotend.
|
||||
*/
|
||||
|
||||
#include "env_validate.h"
|
||||
|
||||
#ifndef DEFAULT_MACHINE_NAME
|
||||
#define DEFAULT_MACHINE_NAME BOARD_INFO_NAME
|
||||
#endif
|
||||
|
||||
//
|
||||
// Disable I2S stepper stream, by default
|
||||
//
|
||||
#undef I2S_STEPPER_STREAM
|
||||
#undef I2S_WS
|
||||
#undef I2S_BCK
|
||||
#undef I2S_DATA
|
||||
|
||||
//
|
||||
// Limit Switches
|
||||
//
|
||||
#define X_STOP_PIN 34
|
||||
#define Y_STOP_PIN 35
|
||||
#define Z_STOP_PIN 15
|
||||
|
||||
//
|
||||
// Steppers
|
||||
//
|
||||
#define X_STEP_PIN 27
|
||||
#define X_DIR_PIN 26
|
||||
#define X_ENABLE_PIN 25
|
||||
|
||||
#define Y_STEP_PIN 33
|
||||
#define Y_DIR_PIN 32
|
||||
#define Y_ENABLE_PIN X_ENABLE_PIN
|
||||
|
||||
#define Z_STEP_PIN 14
|
||||
#define Z_DIR_PIN 12
|
||||
#define Z_ENABLE_PIN X_ENABLE_PIN
|
||||
|
||||
#define E0_STEP_PIN 16
|
||||
#define E0_DIR_PIN 17
|
||||
#define E0_ENABLE_PIN X_ENABLE_PIN
|
||||
|
||||
//
|
||||
// Temperature Sensors
|
||||
//
|
||||
#define TEMP_0_PIN 36 // Analog Input
|
||||
#define TEMP_BED_PIN 39 // Analog Input
|
||||
|
||||
//
|
||||
// Heaters / Fans
|
||||
//
|
||||
#define HEATER_0_PIN 2
|
||||
#define FAN_PIN 13
|
||||
#define HEATER_BED_PIN 4
|
||||
|
||||
//
|
||||
// MicroSD card
|
||||
//
|
||||
#define SD_MOSI_PIN 23
|
||||
#define SD_MISO_PIN 19
|
||||
#define SD_SCK_PIN 18
|
||||
#define SDSS 5
|
||||
#define USES_SHARED_SPI // SPI is shared by SD card with TMC SPI drivers
|
||||
@ -37,41 +37,8 @@
|
||||
#endif
|
||||
|
||||
#define BOARD_INFO_NAME "FYSETC_E4"
|
||||
#define DEFAULT_MACHINE_NAME BOARD_INFO_NAME
|
||||
|
||||
//
|
||||
// Disable I2S stepper stream
|
||||
//
|
||||
#undef I2S_STEPPER_STREAM
|
||||
#define I2S_WS -1
|
||||
#define I2S_BCK -1
|
||||
#define I2S_DATA -1
|
||||
|
||||
//
|
||||
// Limit Switches
|
||||
//
|
||||
#define X_STOP_PIN 34
|
||||
#define Y_STOP_PIN 35
|
||||
#define Z_STOP_PIN 15
|
||||
|
||||
//
|
||||
// Steppers
|
||||
//
|
||||
#define X_STEP_PIN 27
|
||||
#define X_DIR_PIN 26
|
||||
#define X_ENABLE_PIN 25
|
||||
|
||||
#define Y_STEP_PIN 33
|
||||
#define Y_DIR_PIN 32
|
||||
#define Y_ENABLE_PIN X_ENABLE_PIN
|
||||
|
||||
#define Z_STEP_PIN 14
|
||||
#define Z_DIR_PIN 12
|
||||
#define Z_ENABLE_PIN X_ENABLE_PIN
|
||||
|
||||
#define E0_STEP_PIN 16
|
||||
#define E0_DIR_PIN 17
|
||||
#define E0_ENABLE_PIN X_ENABLE_PIN
|
||||
#include "pins_ESPA_common.h"
|
||||
|
||||
#if HAS_TMC_UART
|
||||
//
|
||||
@ -89,28 +56,6 @@
|
||||
#define TMC_BAUD_RATE 115200
|
||||
#endif
|
||||
|
||||
//
|
||||
// Temperature Sensors
|
||||
//
|
||||
#define TEMP_0_PIN 36 // Analog Input
|
||||
#define TEMP_BED_PIN 39 // Analog Input
|
||||
|
||||
//
|
||||
// Heaters / Fans
|
||||
//
|
||||
#define HEATER_0_PIN 2
|
||||
#define FAN_PIN 13
|
||||
#define HEATER_BED_PIN 4
|
||||
|
||||
//
|
||||
// MicroSD card
|
||||
//
|
||||
#define SD_MOSI_PIN 23
|
||||
#define SD_MISO_PIN 19
|
||||
#define SD_SCK_PIN 18
|
||||
#define SDSS 5
|
||||
#define USES_SHARED_SPI // SPI is shared by SD card with TMC SPI drivers
|
||||
|
||||
/**
|
||||
* Hardware serial pins
|
||||
*
|
||||
|
||||
@ -38,68 +38,17 @@
|
||||
|
||||
#define BOARD_INFO_NAME "MRR ESPA"
|
||||
#define BOARD_WEBSITE_URL "github.com/maplerainresearch/MRR_ESPA"
|
||||
#define DEFAULT_MACHINE_NAME BOARD_INFO_NAME
|
||||
|
||||
//
|
||||
// Disable I2S stepper stream
|
||||
//
|
||||
#undef I2S_STEPPER_STREAM
|
||||
#undef I2S_WS
|
||||
#undef I2S_BCK
|
||||
#undef I2S_DATA
|
||||
|
||||
//
|
||||
// Limit Switches
|
||||
//
|
||||
#define X_STOP_PIN 34
|
||||
#define Y_STOP_PIN 35
|
||||
#define Z_STOP_PIN 15
|
||||
#include "pins_ESPA_common.h"
|
||||
|
||||
//
|
||||
// Steppers
|
||||
//
|
||||
#define X_STEP_PIN 27
|
||||
#define X_DIR_PIN 26
|
||||
#define X_ENABLE_PIN 25
|
||||
//#define X_CS_PIN 21
|
||||
|
||||
#define Y_STEP_PIN 33
|
||||
#define Y_DIR_PIN 32
|
||||
#define Y_ENABLE_PIN X_ENABLE_PIN
|
||||
//#define Y_CS_PIN 22
|
||||
|
||||
#define Z_STEP_PIN 14
|
||||
#define Z_DIR_PIN 12
|
||||
#define Z_ENABLE_PIN X_ENABLE_PIN
|
||||
//#define Z_CS_PIN 5 // SS_PIN
|
||||
|
||||
#define E0_STEP_PIN 16
|
||||
#define E0_DIR_PIN 17
|
||||
#define E0_ENABLE_PIN X_ENABLE_PIN
|
||||
//#define E0_CS_PIN 21
|
||||
|
||||
//
|
||||
// Temperature Sensors
|
||||
//
|
||||
#define TEMP_0_PIN 36 // Analog Input
|
||||
#define TEMP_BED_PIN 39 // Analog Input
|
||||
|
||||
//
|
||||
// Heaters / Fans
|
||||
//
|
||||
#define HEATER_0_PIN 2
|
||||
#define FAN_PIN 13
|
||||
#define HEATER_BED_PIN 4
|
||||
|
||||
//
|
||||
// MicroSD card
|
||||
//
|
||||
#define SD_MOSI_PIN 23
|
||||
#define SD_MISO_PIN 19
|
||||
#define SD_SCK_PIN 18
|
||||
#define SDSS 5
|
||||
#define USES_SHARED_SPI // SPI is shared by SD card with TMC SPI drivers
|
||||
|
||||
// Hardware serial pins
|
||||
// Add the following to Configuration.h or Configuration_adv.h to assign
|
||||
// specific pins to hardware Serial1.
|
||||
|
||||
@ -51,7 +51,6 @@
|
||||
//
|
||||
// Enable I2S stepper stream
|
||||
//
|
||||
#undef I2S_STEPPER_STREAM
|
||||
#define I2S_STEPPER_STREAM
|
||||
#define I2S_WS 26
|
||||
#define I2S_BCK 25
|
||||
|
||||
37
Marlin/src/pins/esp32/pins_RESP32_CUSTOM.h
Normal file
37
Marlin/src/pins/esp32/pins_RESP32_CUSTOM.h
Normal file
@ -0,0 +1,37 @@
|
||||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <https://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
/**
|
||||
* Rutilea ESP32 (Tensilica Xtensa LX6) pin assignments
|
||||
*/
|
||||
|
||||
#include "env_validate.h"
|
||||
|
||||
#define BOARD_INFO_NAME "Rutilea ESP32"
|
||||
|
||||
#include "pins_ESPA_common.h"
|
||||
|
||||
//
|
||||
// I2S (steppers & other output-only pins)
|
||||
//
|
||||
#define I2S_STEPPER_STREAM
|
||||
@ -695,6 +695,8 @@
|
||||
#include "esp32/pins_MRR_ESPE.h" // ESP32 env:esp32
|
||||
#elif MB(E4D_BOX)
|
||||
#include "esp32/pins_E4D.h" // ESP32 env:esp32
|
||||
#elif MB(RESP32_CUSTOM)
|
||||
#include "esp32/pins_RESP32_CUSTOM.h" // ESP32 env:esp32
|
||||
#elif MB(FYSETC_E4)
|
||||
#include "esp32/pins_FYSETC_E4.h" // ESP32 env:FYSETC_E4
|
||||
#elif MB(PANDA_ZHU)
|
||||
|
||||
Reference in New Issue
Block a user